UNIT

TRANSITION AND INNER

TRANSITION ELEMENTS
Introduction:
• Generally the metallic elements that have
incompletely filled d or f sub shell in the neutral or
cationic state are called transition metals. This
definition includes lanthanides and actinides.
• However, IUPAC defines transition metal as an
element whose atom has an incomplete d sub shell
or which can give rise to cations with an
incomplete d sub shell.
• They occupy the central position of the periodic
table, between s and p block elements, and their
properties are transitional between highly reactive
metals of s block and elements of p block which
are mostly non metals.

• Except group- 11 elements all transition metals are

hard and have very high melting point.
Importance of d- block elements:

• Transition metals, iron and copper play an important role in the

development of human civilization.

• Many other transition elements also have important applications

such as
Tungsten in light bulb filaments.
Titanium in manufacturing artificial joints.
Molybdenum in boiler plants.
Platinum in catalysis.

• They also play vital role in living system, for example iron in
hemoglobin, cobalt in vitamin B12 etc.,
Position of d- block elements in the periodic table:
Group 3 to Group 12
d- Block elements composed of
3d series (4th period) Scandium to Zinc ( 10 elements)

4dseries ( 5th period) Yttrium to Cadmium ( 10 elements)

5d series ( 6th period) Lanthanum , Haffinium to mercury.

we know that the group-12 elements Zinc, Cadmium and
Mercury do not have partially filled d-orbital either in their
elemental state or in their normal oxidation states. However
they are treated as transition elements, because their
properties are an extension of the properties of the
respective transition elements.

As per the IUPAC definition,

• The seventh period elements, starting from Ac, Rf to Cn
also belong to transition metals. (6d series – in complete)
• All of them are radioactive.
• Except Actinium; all the remaining elements are
synthetically prepared and have very low half life periods
Electronic configuration:
The general electronic configuration of d- block elements can be written as

[Noble gas] (n − )d1-10 ns 1-2

Here, n = 4 to 7 .

In periods 6 and 7, (except La and Ac) the configuration includes ((n −2) f
orbital

[Noble gas] (n −2)f14 (n −1)d1−10ns1−2

Outer electronic configuration of d – block elements:
General trend in properties:
Metallic behaviour:
• For example, in the first series the melting point increases
from Scandium (m.pt 1814K) to a maximum of 2183 K for
vanadium, which is close to 2180K for chromium.
• However, manganese in 3d series and Tc in 4d series have
low melting point.
• The maximum melting point at about the middle of
transition metal series indicates that d5 configuration is
favorable for strong interatomic attraction.
• The following figure shows the trends in melting points of
transition elements.
Variation of atomic and ionic size:
• However the increased nuclear charge is partly
cancelled by the increased screening effect of
electrons in the d – orbitals of penultimate shell.
• When the increased nuclear charge and increased
Screening effect balance each other, the atomic radii
becomes almost constant.
• Increase in atomic radii towards the end may be
attributed to the electron – electron repulsion.
• In fact the pairing of electrons in d – orbitals
occurs after d5 configuration.
• The repulsive interaction between the paired
electron causes Increase in Atomic/ ionic radii
• It is generally expected a steady decrease in atomic radius along a period as
the nuclear charge increases and the extra electrons are added to the same sub
shell.

• But for the 3d transition elements, the expected decrease in atomic radius is
observed from Sc to V , thereafter up to Cu the atomic radius nearly remains
the same.

• As we move from Sc to Zn in 3d series the extra electrons are added to the 3d

orbitals, the added 3d electrons only partially shield the increased nuclear
charge and hence the effective nuclear charge increases slightly.
• However, the extra electrons added to the 3d sub shell strongly repel
the 4s electrons and these two forces are operated in opposite
direction and as they tend to balance each other, it leads to constancy
in atomic radii.

• At the end of the series, d – orbitals of Zinc contain 10 electrons in

which the repulsive interaction between the electrons is more than the
effective nuclear charge and hence, the orbitals slightly expand and
atomic radius slightly increases.

• Generally as we move down a group atomic increases, the same trend

is expected d block elements also. As the electrons are added to the
4d sub shell the atomic radii of the 4d elements are higher than the
corresponding of the 3d series. However there is an unexpected
observation in the atomic radius of 5d elements which have nearly
same atomic radius as that of corresponding 4d elements. Th is is due
to lanthanoide contraction which is to be discussed later in this unit
under inner transition elements.
Ionization enthalpy.
• Ionization energy of transition element is intermediate between those
of s and p block elements.
• As we move from left to right in a transition metal series, the
ionization enthalpy increases as expected.
• This is due to increase in nuclear charge corresponding to the filling
of d electrons.
• The following figure show the trends in ionisation enthalpy of
transition elements.
• The increase in first ionisation enthalpy with increase in atomic number along a
particular series is not regular.
• The added electron enters (n-1)d orbital and the inner electrons act as a shield
and decrease the effect of nuclear charge on valence ns electrons.
• Therefore, it leads to variation in the ionization energy values.
• The ionisation enthalpy values can be used to predict the thermodynamic
stability of their coumponds.

• Let us compare the ionisation energy required to form Ni 2+ and Pt2+ ions.

• Since, the energy required to form Ni2+ is less than that of Pt2+, Ni(II)
compounds are thermodynamically more stable than Pt(II) compounds.
Oxidation state:
The first transition metal Scandium exhibits only +3 oxidation
state, but all other transition elements exhibit variable
oxidation states
Reason : by loosing electrons from (n-1)d orbital and ns
orbital as the energy difference between them is very small.

Let us consider the 3d series; the following table summarizes

the oxidation states of the 3d series elements
• At the beginning of the series, +3 oxidation state is stable but towards
the end +2 oxidation state becomes stable.
• The number of oxidation states increases with the number of electrons
available, and it decreases as the number of paired electrons
increases.
• Hence, the first and last elements show less number of oxidation
states and the middle elements with more number of oxidation states.

• For example,
• The first element Sc has only one oxidation state +3;
The middle element Mn has six different oxidation states from +2 to +7.

The last element Cu shows +1 and +2 oxidation states only.

• The relative stability of different oxidation states of 3d
metals is correlated with the extra stability of half filled and
fully filled electronic configurations.

Example: Mn2+ (3d5 ) is more stable than Mn4+ (3d3 )

• The oxidation states of 4d and 5d metals vary from

+3( for Y and La) to +8 (for Ru and Os).

• The highest oxidation state of 4d and 5d elements are

found in their compounds with the higher electronegative
elements like O, F and Cl. for example: RuO4, OsO4 and
WCl6.

• In Ni(CO)4 and Fe(CO)5, the oxidation state of nickel

and iron is zero.
• Generally in going down a group, a stability of the higher oxidation
state increases while that of lower oxidation state decreases.

• It is evident from the Frost diagram (ΔG0 vs oxidation number) as

shown below,
A Frost
diagram or Frost–
Ebsworth diagram is a
type of graph used by
inorganic chemists in
electrochemistry to
illustrate the relative
stability of a number of
different oxidation states
of a particular substance.
The graph illustrates the
free energy vs oxidation
state of a chemical
species.

• For titanium , vanadium and chromium, the most thermodynamically

stable oxidation state is +3.
• For iron, the stabilities of +3 and +2 oxidation states are similar.
Copper is unique in 3d series having a stable +1 oxidation state.
It is prone to disproportionate to the +2 and 0 oxidation states.
Standard electrode potentials of transition metals
• Redox reactions involve transfer of electrons from one reactant to another.
Such reactions are always coupled, which means that when one substance is
oxidized, another must be reduced.

• The substance which is oxidised is a reducing agent and the one which is
reduced is an oxidizing agent.

• The oxidizing and reducing power of an element is measured in terms of the

standard electrode potentials.

• Standard electrode potential is the value of the standard emf of a cell in which
molecular hydrogen under standard pressure ( 1atm) and temperature (273K)
is oxidised to solvated protons at the electrode.

• If the standard electrode potential (E0), of a metal is large and negative, the
metal is apowerful reducing agent, because it loses electrons easily.

• Standard electrode potentials (reduction potential) of few first transition

metals are given in the following table.
• In 3d series as we move from Ti to Zn, the standard reduction potential
(E o M2+ / M ) value is approaching towards less negative value and copper

has a positive reduction potential. i.e., elemental copper is more stable than
Cu2+.
There are two deviations.,

 In the general trend, Fig shows that (E0 M2+ / M ) value for manganese
and zinc are more negative than the regular trend. It is due to extra
stability which arises due to the half filled d5 configuration in Mn2+ and
completely filled d10 configuration in Zn2+.

 Transition metals in their high oxidation states tend to be

oxidizing . For example,
• Fe 3+ is moderately a strong oxidant, and it oxidises copper to Cu 2+
ions.
• The feasibility of the reaction is predicted from the following
standard electrode potential values.
 Magnetic properties

Th electron is spinning around its own axis, in

addition toe its orbital motion around the
nucleus. Due to these motions, a tiny magnetic
field is generated and it is measured in terms
of magnetic moment.
 Magnetic properties

Paramagnetic Diamagnetic

Substances which contain

electrons in their orbitals – Substances which do not
PARAMAGNETIC. contain any unpaired
electrons and are repelled
• PARAMAGNETIC SUBSTANCES my magnetic field _
are weakly attracted by the DIAMAGNETIC.
magnetic field.

• Substances which are attracted very strongly are said to be

ferromagnetic.

• In fact, ferromagnetism is an extreme form of paramagnetism.

 Most of the transition elements and their compounds

show paramagnetism.

 Paramagnetism arises from the presence of unpaired electrons, each

such electron have a magnetic moment.

 The magnetic moment of any transition element or its compound/ion

is given by (assuming no contribution from the orbital magnetic

moment).

 μs = √n(n+2) BM

 Here n is the number of unpaired electrons

Questions-
Q. 1: Which ion has maximum magnetic moment
(a) V3+ (b) Mn3+
(c) Fe3+ (d) Cu2+

Ans: c

Q.2. What is the magnetic moment of Mn2+ ion (Z= 25) in aqueous solution ?
Ans.- With atomic number 25, the divalent Mn2+ ion in aqueous solution will
have d5 configuration (five unpaired electrons).Hence, The magnetic moment, μ
is
μ = √5(5 + 2) = 5.92BM
Catalytic properties

 The chemical industries manufacture a number of products such as polymers,

flavours, drugs etc., Most of the manufacturing processes have adverse effect
on the environment so there is an interest for eco friendly alternatives.
 In this context, catalyst based manufacturing processes are advantageous, as
they require low energy, minimize waste production and enhance the
conversion of reactants to products.
 Many industrial processes use transition metals or their compounds as
catalysts.
 Transition metal has energetically available d orbitals that can accept electrons
from reactant molecule or metal can form bond with reactant molecule using its
d electrons.
For example,
 Ithe catalytic hydrogenation of an alkene, the alkene bonds to an active site by
using its π electrons with an empty d orbital of the catalyst.
 The σ bond in the hydrogen molecule breaks, and each hydrogen atom forms a
bond with a d electron on an atom in the catalyst.
 The two hydrogen atoms then bond with the partially broken π -bond in the
alkene to form an alkane.
 In certain catalytic processes the variable oxidation states of transition metals
find applications.
 For example, in the manufacture of sulphuric acid from SO 3, vanadium
pentoxide (V2O5) is used as a catalyst to oxidise SO2. In this reaction
V2O5 is reduced to vanadium (IV) Oxide (VO2).
Alloy formation
• An alloy is formed by blending a metal with one or more other
elements.

• The elements may be metals or non-metals or both.

• The bulk metal is named as solvent, and the other elements in smaller
portions are called solute.
According to Hume-Rothery rule
• To form a substitute alloy the difference between the atomic radii of
solvent and solute is less than 15%.
• Both the solvent and solute must have the same crystal structure and
valence and their electro negativity difference must be close to zero.
• Transition metals satisfying these mentioned conditions form a number
of alloys among themselves, since their atomic sizes are similar and
one metal atom can be easily replaced by another metal atom from its
crystal lattice to form an alloy.
• The alloys so formed are hard and often have high melting points.
Examples:
Ferrous alloys, gold – copper alloy, chrome alloys etc.,
Formation of interstitial compounds
• An interstitial compound or alloy is a compound that is formed when small
atoms like hydrogen, boron, carbon or nitrogen are trapped in the interstitial
holes in a metal lattice.
• They are usually non-stoichiometric compounds.
• Transition metals form a number of interstitial compounds such as TiC, ZrH 1.94 ,

Mn 4 N etc .
The elements that occupy the metal lattice provide them new properties.
(i) They are hard and show electrical and thermal conductivity
(ii) They have high melting points higher than those of pure metals
(iii) Transition metal hydrides are used as powerful reducing agents
(iv) Metallic carbides are chemically inert.
Formation of complexes
 Transition elements have a tendency to form coordination
compounds with a species that has an ability to donate an
electron pair to form a coordinate covalent bond.
 Transition metal ions are small and highly charged and
they have vacant low energy orbitals to accept an electron
pair donated by other groups. Due to these properties,
transition metals form large number of complexes.
 Examples: [Fe(CN)6]4- , [Co(NH3)6]3+ ,
Important compound of Transition elements
Oxides and Oxoanions of Metals:
 Generally, transition metal oxides are formed by the reaction of transition
metals with molecular oxygen at high temperatures.
 Except the first member of 3d series, Scandium, all other transition elements
form ionic metal oxides.
 The oxidation number of metal in metal oxides ranges from +2 to +7.
 As the oxidation number of a metal increases, ionic character decreases, for
example, Mn2O7 is covalent. Mostly higher oxides are acidic in nature, Mn 2O7

dissolves in water to give permanganic acid (HMnO4 ) , similarly CrO3 gives

chromic acid (H2CrO4) and dichromic acid (H2Cr2O7).

 Generally lower oxides may be amphoteric or basic, for example, Chromium (III)
oxide - Cr2O3, is amphoteric and Chromium(II) oxide, CrO, is basic in nature.
Potassium dichromate( K2Cr2O7 )
Preparation:
STEP 1: Conversion of Chromate ore into potassium di chromate :
Potassium dichromate is prepared from chromate ore. The ore is
concentrated by gravity separation. It is then mixed with excess
sodium carbonate and lime and roasted in a reverberatory furnace.

STEP 2 : Conversion of Sodium chromate to Sodium di chromate:

The roasted mass is treated with water to separate soluble sodium
chromate from insoluble iron oxide.

The yellow solution of sodium chromate is treated with concentrated

sulphuric acid which converts sodium chromate into sodium dichromate.
STEP 3: Conversion of Sodium di chromate to Potassium di chromate:
The above solution is concentrated to remove less soluble sodium
sulphate. The resulting solution is filtered and further concentrated. It is
cooled to get the crystals of Na2SO4.2H2O.

The saturated solution of sodium dichromate in water is mixed with KCl

and then concentrated to get crystals of NaCl. It is filtered while hot and
the filtrate is cooled to obtain K2Cr2O7 crystals.
Physical properties Of K2Cr2O7 :
 Potassium dichromate is an orange red crystalline solid which
melts at 671K and it is moderately soluble in cold water, but very
much soluble in hot water.

 On heating it decomposes and forms Cr2 O3 and molecular

oxygen. As it emits toxic chromium fumes upon heating, it is
mainly replaced by sodium dichromate.
 Both chromate and dichromate ion are oxo anions of chromium and they are
moderately strong oxidizing agents.
 In these ions chromium is in +6 oxidation state.
 In an aqueous solution, chromate and dichromate ions can be interconvertible,
and in an alkaline solution chromate ion is predominant, whereas dichromate
ion becomes predominant in acidic solutions.
Structure of dichromate ion:
Chemical properties of K2Cr2O7
1. Oxidation
• Potassium dichromate is a powerful oxidising agent in acidic medium.
Its oxidising action in the presence of H+ ions .
• You can note that the change in the oxidation state of chromium from
Cr6+ to Cr3+.
• Its oxidising action is shown below.

• The oxidising nature of potassium dichromate (dichromate ion) is

illustrated in the following examples.
(i) It oxidises ferrous salts to ferric salts:

(ii) It oxidises iodide ions to iodine:

(iii) It oxidises sulphide ion to Sulphur :

(iv) It oxidises sulphur dioxide to sulphate ion

:

(v) It oxidises stannous salts to stannic salt :

(vi) It oxidises alcohols to acids:

2. Chromyl chloride test:
• When potassium dichromate is heated with any chloride salt in the presence of
Conc H2SO4, orange red vapours of chromyl chloride (CrO2Cl2) is evolved. This
reaction is used to confirm the presence of chloride ion in inorganic qualitative
analysis.

• The chromyl chloride vapours are dissolved in sodium hydroxide

solution and then acidified with acetic acid and treated with lead
acetate. A yellow precipitate of lead chromate is obtained.
Uses of potassium dichromate:
Some important uses of potassium dichromate are listed below.
1. It is used as a strong oxidizing
agent.
2. It is used in dyeing and printing.
3. It used in leather tanneries for
chrome tanning.
4. It is used in quantitative analysis
for the estimation of iron compounds
and iodides.
Potassium permanganate - KMnO4
Preparation:
• Potassium permanganate is prepared from pyrolusite (MnO 2) ore.
• The preparation involves the following steps.

(i) Conversion of MnO2 to potassium manganate:

• Powdered ore is fused with KOH in the presence of air or oxidising
agents like KNO3 or KClO3.
• A green coloured potassium manganate is formed.

(ii) Oxidation of potassium manganate to potassium permanganate:

• Potassium manganate thus obtained can be oxidised in two ways ,
either by chemical oxidation or electrolytic oxidation.
Physical properties:
• Potassium permanganate exists in the form of dark purple crystals
which melts at 513 K. It is sparingly soluble in cold water but, fairly
soluble in hot water.
Chemical properties:
1. Action of heat:
• When heated, potassium permanganate decomposes to form potassium
manganate and dioxide.

2. Action of conc H2SO4 :

• On treating with cold conc H2SO4, it decomposes to form manganese
heptoxide, which subsequently decomposes explosively.
3. Oxidising property:
• Potassium permanganate is a strong oxidising agent, its oxidising
action differs in different reaction medium

a) In neutral medium:
• In neutral medium, it is reduced to MnO2

(i) It oxidises H2S to Sulphur:

(ii) It oxidises thiosulphate into sulphate:

b) In alkaline medium:
In the presence of alkali metal hydroxides, the permanganate ion is
converted into manganate.

This manganate is further reduced to MnO2 by some reducing agents.

So the overall reaction can be written as follows.

This reaction is similar as that for neutral medium.

Bayer’s reagent:
• Cold dilute alkaline KMnO4 is known as Bayer’s reagent. It is used to oxidise
alkenes into diols.

• For example, ethylene can be converted into ethylene glycol and this reaction
is used as a test for unsaturation.
c) In acid medium:
• In the presence of dilute sulphuric acid, potassium permanganate acts
as a very strong oxidising agent. Permanganate ion is converted into
Mn2+ ion.

The oxidising nature of potassium permanganate (permanganate ion) in

acid medium is illustrated in the following examples.

(i) It oxidises ferrous salts to ferric salts.

(ii) It oxidises iodide ions to iodine

(iii) It oxidises oxalic acid to CO2 :

(iv) It oxidises sulphide ion to Sulphur :

(v) It oxidises nitrites to nitrates:

(vi) It oxidises alcohols to aldehydes :

(vii) It oxidises sulphite to sulphate :

Uses of potassium permanganate:
Some important uses of potassium permanganate are listed below.
1. It is used as a strong oxidizing agent.
2. It is used for the treatment of various skin infections and fungal
infections of the foot.
3. It used in water treatment industries to remove
iron and hydrogen sulphide from well water.
4. It is used as Bayer’s reagent for detecting
unsaturation in an organic compound.
5. It is used in quantitative analysis for the
estimation of ferrous salts, oxalates,
hydrogen peroxide and iodides.
INNER TRANSITION ELEMENTS(f BLOCK ELEMENTS)
1) Lanthanoids ( previously called lanthanides)
 Lanthanoid series consists of fourteen elements from Cerium
(58Ce) to Lutetium (71Lu) following Lanthanum (57La).

 These elements are characterised by the preferential filling of

4f orbitals,

2) Actinoids ( previously called actinides)

 Actinoids consists of 14 elements from Thorium (90Th) to
Lawrencium (103Lr) following Actinium (89Ac).

 These elements are characterised by the preferential filling of 5f

orbital.
The position of Lanthanoids in the periodic table
 The actual position of Lanthanoids in the periodic table is at group
number 3 and period number 6.
 However, in the sixth period after lanthanum, the electrons are preferentially
filled in inner 4f sub shell and these fourteen elements following lanthanum
show similar chemical properties.
 Therefore these elements are grouped together and placed at the bottom of the
periodic table. This position can be justified as follows.

1. Lanthanoids have general electronic configuration

[Xe] 4f1−14 5d0−1 6s2

2. The common oxidation state of lanthanoides is +3

3. All these elements have similar physical and chemical

properties.
 Similarly the fourteen elements following actinium resemble in their
physical and chemical properties.
 If we place these elements after Lanthanum in the periodic table below
4d series, the properties of the elements belongs to a group would be
different and it would affect the proper structure of the periodic table.
 Hence a separate position is provided to the inner transition elements
as shown in the figure.
Electronic configuration of Lanthanoids:

 We know that the electrons are filled in different orbitals in the order of their
increasing energy in accordance with Aufbau principle.
 As per this rule after filling 5s,5p and 6s and 4f level begin to fill from
lanthanum, and hence the expected electronic configuration of
Lanthanum(La) is [Xe] 4f1 5d0 6s2 but the actual electronic configuration of
Lanthanum is[Xe] 4f0 5d1 6s and it belongs to d block.
 Filling of 4f orbital starts from Cerium (Ce) and its electronic configuration is
[Xe] 4f1 5d 6s2 .
1

 As we move from Cerium to other elements the additional electrons are

progressively filled in 4f orbitals as shown in the table.
In Gadolinium (Gd) and Lutetium (Lu) the 4f orbitals, are half-filled and
completely filled, and one electron enters 5d orbitals. Hence the general
electronic configuration of 4f series of elements can be written as
[Xe] 4f 1−14 5d0−1 6s2
Oxidation state of lanthanoids:
 The common oxidation state of lanthanoids is +3.
 In addition to that some of the lanthanoids also show either +2 or +4 oxidation
states.
 Gd3+ and Lu3+ ions have extra stability, it is due to the fact that they have
exactly half filled and completely filled f-orbitals respectively, their electronic c
onfigurations are

 Similarly Cerium and terbium attain 4f0 and 4f7 configurations respectively in
the +4 oxidation states.
 Eu2+ and Yb2+ ions have exactly half filled and completely filled f orbitals
respectively.
 The stability of different oxidation states has an impact on the
properties of these elements.

 The following table shows the different oxidation states of lanthanoids.

Atomic and ionic radii
As we move across 4f series, the atomic and ionic radii of
lanthanoids show gradual decrease with increase in atomic
number. This decrease in ionic size is called lanthanoid
contraction.
Cause of lanthanoid contraction:
 As we move from one element to another in 4f series ( Ce to Lu)
the nuclear charge increases by one unit and an additional
electron is added into the same inner 4f sub shell.
 We know that 4f sub shell have a diffused shapes and therefore
the shielding effect of 4f electrons relatively poor. Hence, with
increase of nuclear charge, the valence shell is pulled slightly
towards nucleus.
 As a result, the effective nuclear charge experienced by the 4f
electrons increases and the size of Ln3+ ions decreases.
 Lanthanoid contraction of various lanthanoids is shown in the
graph
Consequences of lanthanoid contraction:

1. Basicity differences

As we from Ce3+ to Lu3+ , the basic character of Ln3+ ions decrease. Due to

the decrease in the size of Ln3+ ions, the ionic character of Ln −OH bond

decreases (covalent character increases) which results in the decrease in

the basicity.

2. Similarities among lanthanoids:

In the complete f - series only 10 pm decrease in atomic radii and 20 pm

decrease in ionic radii is observed. because of this very small change in

radii of lanthanoids, their chemical properties are quite similar.

The elements of the second and third transition series resemble each
other more closely than the elements of the first and second transition
series. For example
Actinoids:
 The fourteen elements following actinium ,i.e., from thorium (Th)
to lawrentium (Lr) are called actinoids.
 Unlike the lanthanoids, all the actinoids are radioactive and most
of them have short half lives.
 Only thorium and uranium(U) occur in significant amount in
nature
and a trace amounts of Plutonium(Pu) is also found in Uranium
ores.
 Neptunium(Np) and successive heavier elements are produced
synthetically by the artificial transformation of naturally occuring
elements by nuclear reactions.
Electronic configuration:
 The electronic configuration of actinoids is not definite.
 The general valence shell electronic configuration of 5f elements is
represented as [Rn]5f0-14 6d 0-2 7s 2.

The following table show the electronic configuration of actinoids.

Oxidation state of actinoids:
 Like lanthanoids, the most common state of actinoids is +3.
 In addition to that actinoids show variable oxidation states
such as +2 , +3 , +4 ,+5,+6 and +7.
 The elements Americium(Am) and Thorium (Th) show +2
oxidation state in some compounds , for example thorium
iodide (ThI2).
 The elements Th , Pa, U ,Np , Pu and Am show +5 oxidation
states. Np and Pu exhibit +7 oxidation state.
Differences between lanthanoids and actinoids:
Mr. UTHRAKUMAR . B
PGT CHEMISTRY
VELAMMAL MATRIC HR SCHOOL – SURAPET, CHENNAI