Scribd
Upload
13 views

Lecture#5

The document discusses AC machines and the rotating magnetic field principle behind their operation. It explains that AC machines use a rotating magnetic field produced by a three-phase winding on the stator to induce torque on the rotor and cause it to turn. As the currents in the three phases are 120 degrees out of phase, they generate a magnetic field that rotates synchronously with the electrical frequency of the supply. This rotating field exerts a torque on any currents in the rotor, causing it to chase and align with the rotating field.

Uploaded by

20pwmct0739
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
13 views

Lecture#5

The document discusses AC machines and the rotating magnetic field principle behind their operation. It explains that AC machines use a rotating magnetic field produced by a three-phase winding on the stator to induce torque on the rotor and cause it to turn. As the currents in the three phases are 120 degrees out of phase, they generate a magnetic field that rotates synchronously with the electrical frequency of the supply. This rotating field exerts a torque on any currents in the rotor, causing it to chase and align with the rotating field.

Uploaded by

20pwmct0739
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 35

Actuating Systems

Instructor: Engr Sadaf Sardar


AC Machines
• AC machines are generators that convert mechanical energy to ac
electrical energy and motors that convert ac electrical energy to
mechanical energy.
• The fundamental principles of ac machines are very simple, but
unfortunately, they are somewhat obscured by the complicated
construction of real machines.
AC Machines
• There are two major classes of ac machines
• Synchronous machines
• Induction machines
• Synchronous machines are motors and generators whose magnetic
field current is supplied by a separate dc power source, while
induction machines are motors and generators whose field current is
supplied by magnetic induction (transformer action) into their field
windings.
• The field circuits of most synchronous and induction machines are
located on their rotors.
Simple loop in a uniform magnetic field
• A loop of wire in a uniform magnetic field is the simplest possible
machine that produces a sinusoidal ac voltage.
• This case is not representative of real ac machines, since the flux in
real ac machines is not constant in either magnitude or direction.
• However, the factors that control the voltage and torque on the loop
will be the same as the factors that control the voltage and torque in
real ac machines.
Simple loop in uniform magnetic field
Voltage induced in simple in a rotating
conductor segment

• Segment ab

• Segment cd
Voltage induced in simple in a rotating
conductor segment
Total Induced Voltage
Induced Voltage in a machine
• The voltage generated in the loop is a sinusoid whose magnitude is
equal to the product of the flux inside the machine and the speed of
rotation of the machine.
• In general, the voltage in any real machine will depend on three
factors:
Torque Induced in a Current carrying loop
• Now assume that the rotor loop is at some arbitrary angle Ꝋ with
respect to the magnetic field,
• A current i is flowing in the loop
• If a current flows in the loop, then a torque will be induced on the
wire loop.
• To determine the magnitude and direction of the torque
• The force on each segment of the loop will be given as:
• F = i(l x B)
Torque Induced in a Current carrying loop
• Force on each segment of loop
Torque Induced in a Current carrying loop
• The torque on that segment will then be given by:
• τ = (force applied) (perpendicular distance)
• = (F) (r sin Ꝋ)
• =rFsin Ꝋ
• where Ꝋ is the angle between the vector r and the vector F.
• The direction of the torque is clockwise if it would tend to cause a
clockwise rotation and counterclockwise if it would tend to cause a
counterclockwise rotation.
Torque Induced in a Current carrying loop
Torque Induced in a Current carrying loop
Torque Induced in a Current carrying loop
• The torque induced in the loop is proportional to the strength of the
loop's magnetic field, the strength of the external magnetic field,
and the sine of the angle between them.
• In general, the torque in any real
machine will depend on four factors:
The Rotating Magnetic Field
• In above slides, if two magnetic fields are present in a machine, then a
torque will be created which will tend to line up the two magnetic fields.
• If one magnetic field is produced by the stator of an ac machine and the
other one is produced by the rotor of the machine, then a torque will be
induced in the rotor which will cause the rotor to turn and align itself
with the stator magnetic field.
• If there were some way to make the stator magnetic field rotate, then
the induced torque in the rotor would cause it to constantly "chase" the
stator magnetic field around in a circle.
• This, in a nutshell, is the basic principle of all ac motor operation.
The Rotating Magnetic Field
• How can the stator magnetic field be made to rotate?
• The fundamental principle of ac machine operation is that if a three-
phase set of currents, each of equal magnitude and differing in phase
by 120°, flows in a three-phase winding, then it will produce a rotating
magnetic field of constant magnitude.
• The three-phase winding consists of three separate windings spaced
120° electrical degrees apart around the surface of the machine.
• To understand the concept of the rotating magnetic field,
• We will apply a set of currents to the stator of Figure 3- 8 and see
what happens at specific instants of time. Assume that the currents in
the three coils are given by the equations
The Rotating Magnetic Field
• The current in coil aa' flows into the ‘a’ end of the coil and out the ‘a‘’
end of the coil. It produces the magnetic field intensity:

• Where 0° is the spatial angle of the magnetic field intensity vector, as


shown in Figure. The direction of the magnetic field intensity vector
Haa’(t) is given by the right-hand rule.
• Notice that the magnitude of the magnetic field intensity vector
Haa’(t) varies sinusoidally in time, but the direction of Haa’(t) is always
constant.
The Rotating Magnetic Field
• The flux densities resulting from these magnetic field intensities are
given: B=µH
• They are:
ωt = 0ᵒ
Production of 3-phase rotating magnetic field
• The stator of an machine consists of windings offset by an electrical
angle of 120°.
• When three phase alternating current flows in the stator winding, it
establishes a rotating magnetic field which rotates at a synchronous
speed.
• Changing direction, interchange phases
3-Phase Rotating magnetic field
Relationship Between Electrical Frequency &
The Speed Of Magnetic Field Rotation
• Figure 3-10 shows that the rotating magnetic field in this stator can be
represented as a north pole (where the flux leaves the stator) and a
south pole (where the flux enters the stator).
• These magnetic poles complete one
mechanical rotation around the stator
surface for each electrical cycle of the
applied current
Relationship Between Electrical Frequency &
The Speed Of Magnetic Field Rotation
• Therefore, the mechanical speed of rotation of the magnetic field in
revolutions per second is equal to the electric frequency in hertz:
Assignment#1
What is a solenoid? Explain its different types.
Thank You

You might also like