Scribd
Upload
288 views7 pages

Insite Cal To Caltermiii Cal

To get a real calibration file from Cummins Insite: 1. Use Insite to choose a calibration file, right click and copy it. 2. Paste the file into your C drive, then extract it with the password "ndse". 3. Rename the file with a .xcal extension to make it compatible with Calterm III for uploading to the ECM.

Uploaded by

Mladen Stijepic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
288 views7 pages

Insite Cal To Caltermiii Cal

To get a real calibration file from Cummins Insite: 1. Use Insite to choose a calibration file, right click and copy it. 2. Paste the file into your C drive, then extract it with the password "ndse". 3. Rename the file with a .xcal extension to make it compatible with Calterm III for uploading to the ECM.

Uploaded by

Mladen Stijepic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 7

How to get a real Calibration file from

CUMMINS INCAL DVD useful with:


Calterm III SW
Using SW INSITE, choose your
Calibration
Right Click and Copy your Calibration
With SW INSITE, paste your file in your
C:\ drive
Open windows explorer and go to path :
C:/Intelect/esdn/data/P1I/cal
Here you will find your calibration. Then, right
click and in the new pop-up choose WINZIP to
open the file
Extract your file, you need a password
Password = ndse
You need to change new file extention.
Right click, Rename. Add at the end of the name:
.xcal
Now you have a Calterm III calibration
file ready to use and upload to ECM

You might also like