Scribd
Upload
26 views

Lecture 2 - Site Location and Plant Layout

This document discusses factors to consider when selecting a site location and laying out a chemical plant. The key factors for site selection are marketing area, raw material supply, transport facilities, availability of labor, utilities, land, and environmental/community impact. For plant layout, economic, process, operational, maintenance, safety, and future expansion considerations are important. The layout should optimize material and personnel flow while ensuring safety and convenient expansion.

Uploaded by

Rayan AlShehri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
26 views

Lecture 2 - Site Location and Plant Layout

This document discusses factors to consider when selecting a site location and laying out a chemical plant. The key factors for site selection are marketing area, raw material supply, transport facilities, availability of labor, utilities, land, and environmental/community impact. For plant layout, economic, process, operational, maintenance, safety, and future expansion considerations are important. The layout should optimize material and personnel flow while ensuring safety and convenient expansion.

Uploaded by

Rayan AlShehri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 18

CHE 420

Lecture # 2

Site Location and Plant Layout


Location of Chemical Plant
• Many factors must be considered when selecting a suitable site. The principal factors to consider are:
1) Marketing area.
2) Raw material supply.
3) Transport facilities.
4) Availability of labour.
5) Availability of utilities: water, fuel, power.
6) Availability of suitable land.
7) Environmental impact, and effluent disposal.
8) Local community considerations.
9) Climate.
10) Political and strategic considerations.
Marketing Area

• For materials that are produced in bulk quantities; such


as cement, mineral acids, and fertilisers, where the cost
of the product per tonne is relatively low and the cost
of transport is a significant fraction of the sales price,
the plant should be located close to the primary
market.
• This consideration is less important for low volume
production, high-priced products; such as
pharmaceuticals.
Raw Materials

• The availability and price of suitable raw materials will


often determine the site location.
• Plants producing bulk chemicals are best located close
to the source of the major raw material; where this is
also close to the marketing area.
Transport

• The transport of materials and products to and from the plant will
be an overriding consideration in site selection.
• If practicable, a site should be selected that is close to at least two
major forms of transport: road, rail, waterway (canal or river), or a
sea port.
• Road transport is being increasingly used, and is suitable for local
distribution from a central warehouse.
• Rail transport will be cheaper for the long-distance transport of bulk
chemicals.
• Air transport is convenient and efficient for the movement of
personnel and essential equipment and supplies, and the proximity
of the site to a major airport should be considered.
Availability of Labour

• Labour will be needed for construction of the plant and


its operation. Skilled construction workers will usually
be brought in from outside the site area, but there
should be an adequate pool of unskilled labour
available locally; and labour suitable for training to
operate the plant.
• Skilled tradesmen will be needed for plant
maintenance. Local trade union customs and restrictive
practices will have to be considered when assessing the
availability and suitability of the local labour for
recruitment and training.
Utilities (Services)
• Chemical processes invariably require large quantities of water
for cooling and general process use, and the plant must be
located near a source of water of suitable quality.
• Process water may be drawn from a river, from wells, or
purchased from a local authority.
• At some sites, the cooling water required can be taken from a
river or lake, or from the sea; at other locations cooling towers
will be needed.
• Electrical power will be needed at all sites. Electrochemical
processes that require large quantities of power.
• A competitively priced fuel must be available on site for steam
and power generation.
Location of Chemical Plant

Yanbu Industrial City Jubail Industrial City Jubail New Industrial City Selection Criteria
• x km from Yanbu city • x km from Jubail city • x km from Jubail city Location
• x km from port • x km from port • x km from port
Port
Airport Facilities and
Roadways infrastructures

Railways
Type of industry
Preferred
Area available
Land (price/m2)
Sources of raw
materials
Power Supply
Water Supply
Incentives
Plant Layout
• The principal factors to be considered are:

1. Economic considerations: construction and operating


costs.
2. The process requirements.
3. Convenience of operation.
4. Convenience of maintenance.
5. Safety.
6. Future expansion.
7. Modular Construction
Plant Layout
The process units and ancillary buildings should be laid out to give the most
economical flow of materials and personnel around the site.
Hazardous processes must be located at a safe distance from other
buildings. Consideration must also be given to the future expansion of the
site.
The ancillary buildings and services required on a site, in addition to the
main processing units (buildings), will include:
1. Storages for raw materials and products: tank farms and
warehouses.
2. Maintenance workshops.
3. Stores, for maintenance and operating supplies.
4. Laboratories for process control.
Plant Layout
5. Fire stations and other emergency services.
6. Utilities: steam boilers, compressed air, power generation,
refrigeration, transformer stations.
7. Effluent disposal plant.
8. Offices for general administration.
9. Canteens and other amenity buildings, such as medical
centres.
10. Car parks.
Plant Layout - Costs

• The cost of construction can be minimised by


adopting a layout that gives the shortest run of
connecting pipe between equipment, and the least
amount of structural steel work.

• However, this will not necessarily be the best


arrangement for operation and maintenance.
Plant Layout - Operation

• Equipment that needs to have frequent operator


attention should be located convenient to the
control room.
• Valves, sample points, and instruments should be
located at convenient positions and heights.
• Sufficient working space and headroom must be
provided to allow easy access to equipment.
Plant Layout - Maintenance

• Heat exchangers need to be sited so that the tube


bundles can be easily withdrawn for cleaning and
tube replacement.
• Vessels that require frequent replacement of
catalyst or packing should be located on the outside
of buildings.
• Equipment that requires dismantling for
maintenance, such as compressors and large
pumps, should be placed under cover.
Plant Layout - Safety

• Blast walls may be needed to isolate potentially


hazardous equipment, and confine the effects of an
explosion.

• At least two escape routes for operators must be


provided from each level in process buildings.
Plant Layout - Plant
Expansion
• Equipment should be located so that it can be
conveniently tied in with any future expansion of
the process.

• Space should be left on pipe alleys for future needs,


and service pipes over-sized to allow for future
requirements.

You might also like