Scribd
Upload
259 views

Rtfi Questions 4

1. The step that should follow fixing in film processing is drying. 2. A latent image is an invisible image consisting of exposed grains on undeveloped film. 3. What makes the processed radiograph appear black is the metallic silver formed during development.

Uploaded by

Azhar Ahmad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
259 views

Rtfi Questions 4

1. The step that should follow fixing in film processing is drying. 2. A latent image is an invisible image consisting of exposed grains on undeveloped film. 3. What makes the processed radiograph appear black is the metallic silver formed during development.

Uploaded by

Azhar Ahmad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 5

RTFI QUESTIONS 4

Part 1
1. Which step shall follow fixing when the film is processed?
a) Developing b) Drying
c) Washing d) Stop bath
2. Latent image is:
a) Image which occur after film is removed from fixer
b) Invisible image consisting of exposed grains
c) Radiographic image created by non-film technology
d) Image occurring on film after development and prior fixing.
3. What makes the processed radiograph to appear black?
a) Emulsion b) Metallic silver
c) Silver bromide d) Lead
4. Too short washing time will result in:
a) Reduced contrast b) Increased
density
c) Reduced life time of radiograph d) Reduced sensitivity
5. The fixer is:
a) Alkali b) Acid
c) Neutral d) The pH depends on the solution temperature
Part 2
1. The geometric unsharpness is independent on:
a) Focus size b) Source to film distance
c) Object thickness d) Energy of Radiation
2. The geometric unsharpness increases with increase of:
a) Source to object distance b) Source size
c) Source to film distance d) All of the above
3. Which of the following may have influence on the total unsharpness?
a) Inherent unsharpness b) Geometric unsharpness
c) Relative movement of the object during the exposure
d) All of the above
4. The inverse square law express relation of the distance and:
a) Optical density b) Geometric unsharpness
5. Geometric unsharpness has influence on:
a) Optical density b) Definition
c) Radiation intensity d) All of the above
6. In order to reduce the geometric unsharpness the object should be:
a) As close to film as possible b) As close to source as possible
c) At half way between the source and the film
d) Position of the object has no influence

You might also like