Scribd
Upload
13 views

Control System

The document discusses control systems including definitions, components, types, examples and references. It defines a control system and discusses distributed control systems. It explains the basic components of a control system including the plant, feedback, controller and error detector. It describes open loop and closed loop systems and their advantages and disadvantages.

Uploaded by

Sneha Inamdar
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
13 views

Control System

The document discusses control systems including definitions, components, types, examples and references. It defines a control system and discusses distributed control systems. It explains the basic components of a control system including the plant, feedback, controller and error detector. It describes open loop and closed loop systems and their advantages and disadvantages.

Uploaded by

Sneha Inamdar
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 20

www.studymafia.

org
Seminar
On
Control Systems

Submitted To: Submitted By:


www.studymafia.org www.studymafia.org
CONTENT
 Introduction

 Definition

 Components of Control System


 Types of Control Systems

Open loop control systems


Closed loop control system
 Examples of Control Systems

 Reference
INTRODUCTION

 A control system is a control system for a process or


plant, wherein control elements are distributed
throughout the system.
 This is in contrast to non-distributed systems, which use
a single controller at a central location. In a DCS, a
hierarchy of controllers is connected by communications
networks for command and monitoring.
DEFINITION

 It means by which a variable quantity or set of variable


quantities is made to conform to a prescribed norm. It either
holds the values of the controlled quantities constant or
causes them to vary in a prescribed way.
 A control system may be operated by electricity, by
mechanical means, by fluid pressure (liquid or gas), or by a
combination of means. When a computer is involved in the
control circuit, it is usually more convenient to operate all
of the control systems electrically, although intermixtures
are fairly common.
BASIC COMPONENTS OF CONTROL
SYSTEM
 Plant
 Feedback

 Controller

 Error detector
 Plant: The portion of a system which is to be controlled or
regulated is called as plant or process. It is a unit where actual
processing is performed and if we observe in the above figure,
the input of the plant is the controlled signal generated by a
controller.
 Feedback: It is a controlled action in which the output is
sampled and a proportional signal is given to the input for
automatic correction of any changes in the desired output.
The output is given as feedback to the input for correction i.e.
information about output is given to input for correcting the
changes in output due to disturbances. The feedback signal is
fed to the error detector.
 Error Detector: The function of error detector is to compare
the reference input with the feedback signal. It produces an
error signal which is a difference of two inputs which are
reference signal and a feedback signal. The error signal is fed
to the controller for necessary controlled action.
 Controller: the element of a system within itself or external to
the system which controls the plant is called as a controller.
The error signal will be a weak signal and so it has to be
amplified and then modified for better control action.
In most of the systems, the controller itself amplifies the error
signal and integrates or differentiates to generate a control
signal.
Types of Control Systems
 Open loop control systems
 Closed loop control system

 Open loop control systems

PROCES
INPUT S OUTPUT
OPEN LOOP CONTROL SYSTEM
 In open loop control system we have a process which we have to
control and some input to change the process and out put. We
have an example of a tank level control

Hi level
Start/ switch
stop

lo level
switch
OPEN LOOP CONTROL
 In open loop control system when we start the pump it
will continue fill the fluid in the tank but at a time tank
will overflow still pump will not stop. In open loop
control we have no feedback that what is going on in
process.
 We have to manually control the pump by putting a man
at near the tank .He will see that if the high level switch
glow then he will stop the pump and if lo level will glow
then he will start the pump.
ADVANTAGES OF OPEN LOOP SYSTEM

 The open loop systems are simple and economical.


 They are easier to construct.

 The open loop systems are stable.


DISADVANTAGES OF OPEN LOOP SYSTEM

 The open loop systems are inaccurate and unreliable.


 The changes in the output due to external disturbances
are not corrected automatically.
CLOSED LOOP CONTROL
 Closed loop control system have information
about the change in process with respect to
change in input. Now consider the previous
example in open loop control system.

Start/
Hi level
stop
switch
lo level
switch
Contr
ol
syste
m
CLOSE LOOP CONTROL SYSTEM BLOCK
DIAGRAM

Block diagram

Contro
Process OUTPUT
INPUT ller

FEEDBACK
CLOSED LOOP CONTROL
 In open loop control system when we start the pump we
have no status of the tank level but in closed loop control
we have status of tank level and if tank level goes below,
low level switch act and the pump will start by
controller.
 In second case if the tank level goes high then the high
level switch act and controller stop the pump. Hence the
difference between the open loop and closed loop control
system
ADVANTAGES OF CLOSED LOOP
SYSTEM
 Closed loop systems are accurate.
 They are accurate even in the presence of nonlinearity.

 They are more stable.

 They are less affected by noise.


DISADVANTAGES OF CLOSED
LOOP SYSTEM
 They are complex and expensive.
 The feedback in closed loop system may leave to
oscillatory response.
 More care is needed to design a closed loop system.

 The overall gain of the system is reduced due to


feedback.
EXAMPLES OF CONTROL
SYSTEMS
 Distinct examples of control systems are as follows:
 Liquid level control system

 Room temperature control system

 Traffic control system

 Home heating systems


REFERENCES
 www.google.com
 www.wikipedia.com

 www.studymafia.org
THANKS

You might also like