Networking Technologies

IP Addressing
Makerere University Business School
www.mubs.ac.ug

Diploma in Computer Science II

By Ismael Kato; [email protected]
IP Addresses

 Structure of an IP address
 Classful IP addresses
 Limitations and problems with classful IP addresses
 CIDR
 IP Version 4 Vs IP V6 addresses
What is an IP Address?

 An IP address is a unique global address for a network

interface
 Exceptions:
 Dynamically assigned IP addresses ( DHCP)
 IP addresses in private networks ( NAT)

 An IP address:
- is a 32 bit long identifier
- encodes a network number (network prefix)
and a host number
 IP address

 An IP address is a 32-bit sequence of 1s and 0s.

 The IP address is divided into network and host potion
 To make the IP address easier to use, the address is
usually written as four decimal numbers separated by
periods.
 This way of writing the address is called the dotted
decimal format.
 A typical IP address looks like this: 192.57.30.224
 Look at the same IP address in binary:
 11000000.00111001.00011110.11100000

4
Why Address

• Addressing is necessary for any communication

– To talk: Appearance, name, …
– To call: Telephone numbers
– To mail: Postal address
– To visit: Postal address + directions
– To E-Mail: E-Mail addresses
• These ‘addresses’ allow us to uniquely identify
the entity with which we wish to communicate
Physical Addressing (MAC)

6
 Logical Addressing: IP

Every machine on Internet has a unique number assigned to

it, called an IP address.
Without a unique IP address on your machine, you will not
be able to communicate with other devices, users, and
computers on the Internet.
You can look at your IP address as if it were a telephone
number, each one being unique and used to identify a way to
reach you and only you.

7
 Logical Addressing: IP

IP addresses come in two versions that is IPv4 and

IPv6
The scope of this study is based on IPv4. The
major difference btn the two derives from the number
of bits.
IPv4 is a 32 bit sequence while IPv6 is a 128 bit
sequence

8
Binary and Decimal Conversion

9
 IP address cont’d…

 The 4 numbers in an IP address are called octets, because they each

have eight positions when viewed in binary form.

 If you add all the positions together, you get 32, which is why IP

addresses are considered 32-bit numbers.

 Since each of the eight positions can have two different states (1 or 0) the

total number of possible combinations per octet is 28 or 256

 Combine 4 octets & you get 232 or a possible 4,294,967,296 unique values!

10
Network prefix and host number

• The network prefix identifies a network and the host number

identifies a specific host (actually, interface on the network).

network prefix host number

• How do we know how long the network prefix is?

– Before 1993: The network prefix is implicitly defined (see
class-based addressing)
or
– After 1993: The network prefix is indicated by a netmask.
Dotted Decimal Notation

 IP addresses are written in a so-called dotted decimal

notation
 Each byte is identified by a decimal number in the range
[0..255]:

 Example:
10000000 10001111 10001001 10010000
1st Byte 2nd Byte 3rd Byte 4th Byte
= 128 = 143 = 137 = 144

128.143.137.144
Special IP Addresses
 Reserved or (by convention) special addresses:

 Loopback interfaces
 all addresses 127.0.0.1-127.255.255.255 are reserved for loopback interfaces
 Most systems use 127.0.0.1 as loopback address
 loopback interface is associated with name “localhost”
 IP address of a network
 Host number is set to all zeros, e.g., 128.143.0.0
 Broadcast address
 Host number is all ones, e.g., 128.143.255.255
 Broadcast goes to all hosts on the network
 Often ignored due to security concerns
 Test / Experimental addresses
Certain address ranges are reserved for “experimental use”. Packets should get dropped if they
contain this destination address (see RFC 1918):
 10.0.0.0 - 10.255.255.255
 172.16.0.0 - 172.31.255.255
 192.168.0.0 - 192.168.255.255
 Convention (but not a reserved address)
 Default gateway has host number set to ‘1’, e.g., e.g., 192.0.1.1
Classful IP Adresses (Until 1993)

• When Internet addresses were standardized (early 1980s),

the Internet address space was divided up into classes:
– Class A: Network prefix is 8 bits long
– Class B: Network prefix is 16 bits long
– Class C: Network prefix is 24 bits long

• Each IP address contained a key which identifies the class:

– Class A: IP address starts with “0”
– Class B: IP address starts with “10”
– Class C: IP address starts with “110”
The old way: Internet Address Classes

bit # 0 1 7 8 31

Class A 0
Network Prefix Host Number
8 bits 24 bits

bit # 0 1 2 15 16 31

Class B 10 network id host

Network Prefix Host Number

16 bits 16 bits

bit # 0 1 2 3 23 24 31

Class C 110 network id host

Network Prefix Host Number

24 bits 8 bits
The old way: Internet Address Classes

bit # 0 1 2 3 4 31

Class D 1110 multicast group id

bit # 0 1 2 3 4 5 31

Class E 11110 (reserved for future use)

Problems with Classful IP Addresses

• By the early 1990s, the original classful address scheme had

a number of problems
– Flat address space. Routing tables on the backbone Internet
need to have an entry for each network address. When Class C
networks were widely used, this created a problem. By the 1993, the
size of the routing tables started to outgrow the capacity of routers.

Other problems:
– Too few network addresses for large networks
• Class A and Class B addresses were gone
– Limited flexibility for network addresses:
• Class A and B addresses are overkill (>64,000 addresses)
• Class C address is insufficient (requires 40 Class C addresses)
CIDR - Classless Interdomain Routing

• IP backbone routers have one routing table entry for each

network address:
– With subnetting, a backbone router only needs to know one entry for
each Class A, B, or C networks
– This is acceptable for Class A and Class B networks
• 27 = 128 Class A networks
• 214 = 16,384 Class B networks
– But this is not acceptable for Class C networks
• 221 = 2,097,152 Class C networks
• In 1993, the size of the routing tables started to outgrow the
capacity of routers
• Consequence: The Class-based assignment of IP addresses
had to be abandoned
CIDR - Classless Interdomain Routing

• Goals:
– New interpretation of the IP address space
– Restructure IP address assignments to increase efficiency
– Permits route aggregation to minimize route table entries

• CIDR (Classless Interdomain routing)

– abandons the notion of classes
– Key Concept: The length of the network prefix in the IP
addresses is kept arbitrary
– Consequence: Size of the network prefix must be provided
with an IP address
CIDR Notation

• CIDR notation of an IP address:

192.0.2.0/18
• "18" is the prefix length. It states that the first 18 bits are the
network prefix of the address (and 14 bits are available for specific
host addresses)

• CIDR notation can replace the use of subnetmasks (but is more general)
– IP address 128.143.137.144 and subnetmask 255.255.255.0 becomes
128.143.137.144/24

• CIDR notation allows to drop traling zeros of network addresses:

192.0.2.0/18 can be written as 192.0.2/18
CIDR address blocks
• CIDR notation can nicely express blocks of addresses
• Blocks are used when allocating IP addresses for a company and for routing tables
(route aggregation)

CIDR Block Prefix # of Host Addresses

/27 32
/26 64
/25 128
/24 256
/23 512
/22 1,024
/21 2,048
/20 4,096
/19 8,192
/18 16,384
/17 32,768
/16 65,536
/15 131,072
/14 262,144
/13 524,288
CIDR and Address assignments

• Backbone ISPs obtain large block of IP addresses space and

then reallocate portions of their address blocks to their
customers.

Example:
• Assume that an ISP owns the address block 206.0.64.0/18, which
represents 16,384 (214) IP addresses
• Suppose a client requires 800 host addresses
• With classful addresses: need to assign a class B address (and
waste ~64,700 addresses) or four individual Class Cs (and introducing 4
new routes into the global Internet routing tables)
• With CIDR: Assign a /22 block, e.g., 206.0.68.0/22, and allocated a
block of 1,024 (210) IP addresses.
CIDR and Routing

• Aggregation of routing table entries:

– 128.143.0.0/16 and 128.144.0.0/16 are represented as
128.142.0.0/15
• Longest prefix match: Routing table lookup finds the routing entry
that matches the longest prefix

Prefix Interface
What is the outgoing interface for
128.0.0.0/4 interface #5
128.143.137.0/24 ?
128.128.0.0/9 interface #2
128.143.128.0/17 interface #1

Route aggregation can be exploited

when IP address blocks are assigned Routing table
in an hierarchical fashion
CIDR and Routing Information:
MUBS Network

Makerere Univ :
206.0.68.0/22
ISP X owns:
206.0.64.0/18
204.188.0.0/15
209.88.232.0/21
Internet
Backbone MTN as an
ISP :
209.88.237.0/24

MUBS Main: MTAC Campus:

209.88.237.192/26 209.88.237.0/26
 CIDR and Routing Information: E.g. of MUBS
Backbone routers do not know
anything about Makerere, UTL,
or MUBS Main, MTAC.
Makerere Univ :
206.0.68.0/22
L does not know about MUBS
ISP UTL owns:
in, MTAC. UTL206.0.64.0/18
sends everything which matches
the204.188.0.0/15
prefix:
nternet 209.88.237.192/26
209.88.232.0/21 to MUBS Main
209.88.237.0/26 to MTAC Campus
ackbone
UTL sends everything which
matches the prefix:
UTL as an
206.0.68.0/22 to Makerere, ISP:
209.88.237.0/24 to MTN 209.88.237.0/24

Backbone sends everything

which matches the prefixes
MUBS Main: MTAC Campus:
206.0.64.0/18, 204.188.0.0/15,
209.88.232.0/21 to UTL Online. 209.88.237.192/26 209.88.237.0/26
IPv6 - IP Version 6

• IP Version 6
– Is the successor to the currently used IPv4
– Specification completed in 1994
– Makes improvements to IPv4 (no revolutionary changes)

• One (not the only !) feature of IPv6 is a significant increase in

of the IP address to 128 bits (16 bytes)
• IPv6 will solve – for the foreseeable future – the
problems with IP addressing
• 1024 addresses per square inch on the surface of the
Earth.
IPv6 vs. IPv4: Address Comparison

 IPv4 has a maximum of

232  4 billion addresses
 IPv6 has a maximum of
2128 = (232)4  4 billion x 4 billion x 4 billion
x 4 billion addresses
Next: Sub-netting

To be covered the following week