0% found this document useful (0 votes)
23 views

Alexander CH 07 Final R 1

Uploaded by

Hamna Khalid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
23 views

Alexander CH 07 Final R 1

Uploaded by

Hamna Khalid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 22

Alexander-Sadiku

Fundamentals of Electric Circuits


Chapter 7
First-Order Circuits
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

1
First-Order Circuits
Chapter 7
7.1 The Source-Free RC Circuit
7.2 The Source-Free RL Circuit
7.3 Unit-step Function
7.4 Step Response of an RC Circuit
7.5 Step Response of an RL Circuit

2
7.1 The Source-Free
RC Circuit (1)
• A first-order circuit is characterized by a first-
order differential equation.

By KCL
v dv
iR  iC  0 C 0
R dt

Ohms law Capacitor law

• Apply Kirchhoff’s laws to purely resistive circuit results in


algebraic equations.
• Apply the laws to RC and RL circuits produces differential
3
equations.
7.1 The Source-Free
RC Circuit (2)
• The natural response of a circuit refers to the behavior
(in terms of voltages and currents) of the circuit itself,
with no external sources of excitation.

Time constant RC


Decays more slowly

Decays faster

• The time constant  of a circuit is the time required for the


response to decay by a factor of 1/e or 36.8% of its initial value.
• v decays faster for small  and slower for large .
4
7.1 The Source-Free
RC Circuit (3)
The key to working with a source-free RC circuit is
finding:

v (t )  V0 e  t /  where RC

1. The initial voltage v(0) = V0 across the


capacitor.
2. The time constant  = RC.
5
7.1 The Source-Free
RC Circuit (4)
Example 1
Refer to the circuit below, determine vC, vx, and
io for t ≥ 0.
Assume that vC(0) = 30 V.

• Please refer to lecture or textbook for more detail elaboration.


Answer: vC = 30e–0.25t V ; vx = 10e–0.25t ; io = –2.5e–0.25t A
6
7.1 The Source-Free
RC Circuit (5)
Example 2
The switch in circuit below is opened at t = 0,
find v(t) for t ≥ 0.

• Please refer to lecture or textbook for more detail elaboration.


Answer: V(t) = 8e–2t V
7
7.2 The Source-Free
RL Circuit (1)
• A first-order RL circuit consists of a inductor
L (or its equivalent) and a resistor (or its
equivalent)
By KVL vL  vR  0
di
L  iR  0
dt

Inductors law Ohms law

di R Rt / L
  dt i (t )  I 0 e
i L
8
7.2 The Source-Free
RL Circuit (2)

A general form representing a RL

t / 
i (t )  I 0 e
L
where 
R

• The time constant  of a circuit is the time required for the response to
decay by a factor of 1/e or 36.8% of its initial value.
• i(t) decays faster for small  and slower for large .
• The general form is very similar to a RC source-free circuit. 9
7.2 The Source-Free
RL Circuit (3)
Comparison between a RL and RC circuit

A RL source-free circuit A RC source-free circuit

L
i (t )  I 0 e t / 
where  v(t )  V0 e  t / where   RC
R

10
7.2 The Source-Free
RL Circuit (4)
The key to working with a source-free RL
circuit is finding:

 t / L
i (t )  I 0 e where 
R

1. The initial voltage i(0) = I0 through the


inductor.
2. The time constant  = L/R. 11
7.2 The Source-Free
RL Circuit (5)
Example 3
Find i and vx in the circuit.

Assume that i(0) = 5 A.

• Please refer to lecture or textbook for more detail elaboration.

Answer: i(t) = 5e–53t A 12


7.2 The Source-Free
RL Circuit (6)
Example 4
For the circuit, find i(t) for t > 0.

• Please refer to lecture or textbook for more detail elaboration.

Answer: i(t) = 2e–2t A 13


7.3 Unit-Step Function (1)
• The unit step function u(t) is 0 for negative
values of t and 1 for positive values of t.

 0, t0
u (t )  
1, t0

 0, t  to
u (t  to )  
1, t  to

 0, t   to
u (t  to )  
1, t   to
14
7.3 Unit-Step Function (2)
Represent an abrupt change for:

1. voltage source.

2. for current source:

15
7.4 The Step-Response
of a RC Circuit (1)
• The step response of a circuit is its behavior when the
excitation is the step function, which may be a voltage
or a current source.
• Initial condition:
v(0-) = v(0+) = V0

• Applying KCL,
dv v  Vs u (t )
c  0
dt R
or
dv v  Vs
 u (t )
dt RC
16
• Where u(t) is the unit-step function
7.4 The Step-Response
of a RC Circuit (2)
• Integrating both sides and considering the initial
conditions, the solution of the equation is:

V0 t0
v(t )   t / 
V
 s  (V0  V s ) e t 0

Final value Initial value Source-free


at t -> ∞ at t = 0 Response

Complete Response = Natural response + Forced Response


(stored energy) (independent source)

= V0e–t/τ + Vs(1–e–t/τ) 17
7.4 The Step-Response
of a RC Circuit (3)
Three steps to find out the step response
of an RC circuit:
1. The initial capacitor voltage v(0).
2. The final capacitor voltage v() — DC
voltage across C.
3. The time constant .

 t /
v (t )  v ()  [v (0)  v ()] e
Note: The above method is a short-cut method. You may also
determine the solution by setting up the circuit formula directly
using KCL, KVL , ohms law, capacitor and inductor VI laws. 18
7.4 The Step-Response
of a RC Circuit (4)
Example 5
Find v(t) for t > 0 in the circuit in below.
Assume the switch has been open for a long
time and is closed at t = 0.
Calculate v(t) at t = 0.5.

• Please refer to lecture or textbook for more detail elaboration.

Answer: v(t )  15e 2t  and


5 v(0.5) = 0.5182V 19
7.5 The Step-response
of a RL Circuit (1)
• The step response of a circuit is its behavior when the
excitation is the step function, which may be a voltage or
a current source.

• Initial current
i(0-) = i(0+) = Io

• Final inductor current


i(∞) = Vs/R

• Time constant  = L/R


t
Vs Vs  
i (t )   ( I o  )e u (t )
R R
20
7.5 The Step-Response
of a RL Circuit (2)
Three steps to find out the step response
of an RL circuit:
1. The initial inductor current i(0) at t = 0+.
2. The final inductor current i().
3. The time constant .

 t /
i (t )  i ()  [i (0 )  i ()] e

Note: The above method is a short-cut method. You may also


determine the solution by setting up the circuit formula directly
using KCL, KVL , ohms law, capacitor and inductor VI laws. 21
7.5 The Step-Response
of a RL Circuit (4)
Example 6
The switch in the circuit shown below has been
closed for a long time. It opens at t = 0.
Find i(t) for t > 0.

• Please refer to lecture or textbook for more detail elaboration.

Answer: i (t )  2  e 10t 22

You might also like