Scribd
Upload
7 views

Network Models

Uploaded by

jamirohan2004
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
7 views

Network Models

Uploaded by

jamirohan2004
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 40

Chapter 2

Network Models

2.1 Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
2-1 LAYERED TASKS

We use the concept of layers in our daily life. As an


example, let us consider two friends who communicate
through postal mail. The process of sending a letter to a
friend would be complex if there were no services
available from the post office.

Topics discussed in this section:


Sender, Receiver, and Carrier
Hierarchy

2.2
Figure 2.1 Tasks involved in sending a letter

2.3
2-2 THE OSI MODEL
Established in 1947, the International Standards
Organization (ISO) is a multinational body dedicated to
worldwide agreement on international standards. An ISO
standard that covers all aspects of network
communications is the Open Systems Interconnection
(OSI) model. It was first introduced in the late 1970s.

Topics discussed in this section:


Layered Architecture
Peer-to-Peer Processes
Encapsulation

2.4
Note

ISO is the organization.


OSI is the model.

2.5
Figure 2.2 Seven layers of the OSI model

2.6
Figure 2.3 The interaction between layers in the OSI model

2.7
Figure 2.4 An exchange using the OSI model

2.8
2-3 LAYERS IN THE OSI MODEL

In this section we briefly describe the functions of each


layer in the OSI model.
Topics discussed in this section:

Application Layer
Presentation Layer
Session Layer
Transport Layer
Network Layer
Data Link Layer
2.9Physical Layer
Figure 2.14 Application layer

2.10
The application layer is responsible for
providing services to the user.
Functions
1.Network Virtual Terminal(HTTP)
2.File transfer, access and management
3.Mail Services
4. Directory services ( able to access global
database)

2.11
Figure 2.13 Presentation layer

2.12
The presentation layer is responsible for
1.Translation,
2. Compression
3. Encryption.

2.13
Figure 2.12 Session layer

2.14
The session layer is responsible for
1.Authentication
2. Dialog control
3. Session Restoration
4. Synchronization.

2.15
Figure 2.10 Transport layer

2.16
The transport layer is responsible for the
delivery of a message from one process to
another.
1. Port addressing
2. Segmentation and reassembly
3.Flow control
4. Access control

2.17
Figure 2.11 Reliable process-to-process delivery of a message

2.18
The Network layer is responsible for the
delivery of individual packets from
the source host to the destination host.
1.Logical Addressing
2.Routing

2.19
Figure 2.9 Source-to-destination delivery

2.20
Figure 2.6 Data link layer

2.21
The data link layer is responsible for moving
frames from one hop (node) to the next hop.
1.Physical Addressing
2. Framing
3. Flow control
4. Error Control
5. Access Control

2.22
Figure 2.7 Hop-to-hop delivery

2.23
Figure 2.5 Physical layer

2.24
The physical layer is responsible for
movements of individual bits from one hop
(node) to the next.
1.Physical characteristics of medium
2.Encoding (bits to signal)
3.Data rate
4.Line configuration( point to point or multi
point connection)
5.Physical topology
6.Data flow
2.25
Figure 2.15 Summary of layers

2.26
2-4 TCP/IP PROTOCOL SUITE

The layers in the TCP/IP protocol suite do not exactly


match those in the OSI model. The original TCP/IP
protocol suite was defined as having four layers: host-to-
network, internet, transport, and application. However,
when TCP/IP is compared to OSI, we can say that the
TCP/IP protocol suite is made of five layers: physical,
data link, network, transport, and application.

Topics discussed in this section:


Physical and Data Link Layers
Network Layer
Transport Layer
Application Layer
2.27
Figure 2.16 TCP/IP and OSI model

2.28
2-5 ADDRESSING

Four levels of addresses are used in an internet employing


the TCP/IP protocols: physical, logical, port, and specific.

Topics discussed in this section:


Physical Addresses
Logical Addresses
Port Addresses
Specific Addresses

2.29
Figure 2.17 Addresses in TCP/IP

2.30
Figure 2.18 Relationship of layers and addresses in TCP/IP

2.31
Example 2.1

In Figure 2.19 a node with physical address 10 sends a


frame to a node with physical address 87. The two nodes
are connected by a link (bus topology LAN). As the
figure shows, the computer with physical address 10 is
the sender, and the computer with physical address 87 is
the receiver.

2.32
Figure 2.19 Physical addresses

2.33
Example 2.2

Most local-area networks use a 48-bit (6-byte) physical


address written as 12 hexadecimal digits; every byte (2
hexadecimal digits) is separated by a colon, as shown
below:

07:01:02:01:2C:4B

A 6-byte (12 hexadecimal digits) physical address.

2.34
Example 2.3

Figure 2.20 shows a part of an internet with two routers


connecting three LANs. Each device (computer or
router) has a pair of addresses (logical and physical) for
each connection. In this case, each computer is
connected to only one link and therefore has only one
pair of addresses. Each router, however, is connected to
three networks (only two are shown in the figure). So
each router has three pairs of addresses, one for each
connection.

2.35
Figure 2.20 IP addresses

2.36
Example 2.4

Figure 2.21 shows two computers communicating via the


Internet. The sending computer is running three
processes at this time with port addresses a, b, and c. The
receiving computer is running two processes at this time
with port addresses j and k. Process a in the sending
computer needs to communicate with process j in the
receiving computer. Note that although physical
addresses change from hop to hop, logical and port
addresses remain the same from the source to
destination.

2.37
Figure 2.21 Port addresses

2.38
Note

The physical addresses will change from hop to hop,


but the logical addresses usually remain the same.

2.39
Example 2.5

A port address is a 16-bit address represented by one


decimal number as shown.

753

A 16-bit port address represented


as one single number.

2.40

You might also like