Chapter 1 /Introduction to AutoCAD

Learning Objectives:
 Start AutoCAD and start a drawing in AutoCAD.  Understand the various components of the initial AutoCAD screen.  Invoke AutoCAD commands from the keyboard, menu, toolbar, shortcut menu, screen menu, and digitizer.  Understand the functioning of dialog boxes in AutoCAD.  Start a new drawing using the QNEW command and the Startup dialog box.  Save the work using various file-saving commands.  Close a drawing.  Open an existing drawing.  Understand the concept of Multiple Document Environment.  Quit AutoCAD.  Use the various options of AutoCADs help.  Understand the use of Active Assistance, Learning Assistance, and other interactive help topics.

Chapter 1 /Introduction to AutoCAD

 STARTING AUTOCAD
When you turn on your computer, the operating system (Windows 95, Windows NT, or Windows 98) is automatically loaded. This will display the Windows screen with various application icons. You can start AutoCAD by double-clicking on the AutoCAD 2004 icon available on the desktop of your computer. You can also load AutoCAD from the Windows taskbar by choosing the Start button at the bottom left corner of the screen (default position) to display the menu. Choose Programs to display the program folders. Now, choose the Autodesk > AutoCAD 2004 folder to display the AutoCAD programs and then choose AutoCAD 2004 to start AutoCAD.

Chapter 1 /Introduction to AutoCAD

Windows screen with taskbar and application icons

Learning Objectives

Chapter 1 /Introduction to AutoCAD

 AutoCAD SCREEN COMPONENT
The various components of the initial AutoCAD screen are:

Drawing Area Command Window Status Bar Status Bar Tray Options

Learning Objectives

AutoCAD screen components

Chapter 1 /Introduction to AutoCAD

Drawing Area
The drawing area covers the major portion of the screen. Here you can draw the various objects and use the various commands. There is a coordinate system icon at the lower left corner of the drawing area. The window also has the standard Windows buttons such as close, minimize, scroll bar, and so on, that have the same functions as for any other standard window.

Command Window
The command window is present at the bottom of the drawing area and has the Command prompt where you can enter the commands. You can change the size of the window by placing the cursor on the top edge and then dragging it. By default the command window displays only three lines.

Learning Objectives

AutoCAD Scrn. Components

Chapter 1 /Introduction to AutoCAD

Status Bar
The status bar is displayed at the bottom of the screen. This bar contains some useful information and buttons that will make it easy to change the status of some AutoCAD functions. To change the status, you must choose the buttons that toggle between on and off.

Default status bar display

Learning Objectives

Chapter 1 /Introduction to AutoCAD

The various options under the Status Bar are:

Coordinate display Snap Grid Ortho Polar

Osnap Otrack LWT Model

Learning Objectives

AutoCAD Scrn. Components

Chapter 1 /Introduction to AutoCAD

Coordinate display
The Coordinates information is displayed in the left corner of the status bar. You can select this coordinate button to toggle between on and off. The COORDS system variable controls the type of display of the coordinates.

Snap
If Snap Mode is on, the Snap button is displayed as pressed in the status bar; otherwise, it is not displayed. This allows you to move the cursor in fixed increments. You can also use the function key F9 as a toggle key to turn Snap off or on.

Grid
If Grid Display is on, grid lines are displayed on the screen. These lines are used as reference lines in a drawing. The function key F7 can be used to turn the grid display on or off.
Learning Objectives Status Bar Options

Chapter 1 /Introduction to AutoCAD

Ortho
The Ortho Mode allows you to draw lines at right angles only. If this mode is on, the ORTHO button is pressed in the status bar. You can use the F8 key to turn Ortho on or off.

Polar
If you turn the Polar Tracking on, the movement of the cursor is restricted along a path based on the angle set as the polar angle settings. Choosing the POLAR button in the status bar turns the Polar Tracking on. You can also use the function key, F10.

Osnap
When Object Snap is on, you can use the running object snaps to snap on to a point. If Object Snap is on, the OSNAP button is displayed as pressed in the status bar. You can also use the F3 key to turn the Object Snap on or off.
Learning Objectives Status Bar Options

Chapter 1 /Introduction to AutoCAD

Otrack
Choosing the OTRACK button, turns Object Snap Tracking on or off.

LWT
Choosing this button in the status bar, allows you to turn on or off the display of lineweights in the drawing. If the LWT button is not pressed, the display of Lineweight is turned off.

Model
The Model button is displayed in the status bar when you are working in the model space to create drawings. You can choose this button to shift to the layouts (paper space) where you can create drawing views. Once you switch to layouts, this button is replaced by the PAPER button. You can choose the PAPER button to shift back to the model space.
Learning Objectives Status Bar Options

Chapter 1 /Introduction to AutoCAD

Status Bar Tray Options*
The status bar tray options are displayed at the lower-right corner of the screen. These options are used to access the frequently used commands in AutoCAD.

Communication Center*
The Communication Center displays a message and an alert whenever Autodesk provides the latest information regarding software updates and their other products.

Manage Xrefs*
The Manage Xrefs icon is displayed whenever an external reference drawing is attached to the selected drawing. This icon displays a message and an alert whenever an xref drawing is required to be reloaded.

Learning Objectives

Chapter 1 /Introduction to AutoCAD

CAD Standards*
The CAD Standards icon is displayed whenever a standard drawing is associated with the selected drawing to compare the standards. This icon displays a message and an alert whenever standard violation occurs in the drawing.

Validate Digital Signatures*

The Validate Digital Signatures icon is displayed whenever AutoCAD drawing has a valid digital signature. You can validate the digital signature by clicking on this icon.

Learning Objectives

AutoCAD Scrn. Components

Chapter 1 /Introduction to AutoCAD

 INVOKING COMMANDS IN AutoCAD
When you start AutoCAD and you are in the drawing area, you need to invoke AutoCAD commands to perform any operation. AutoCAD has provided the following methods to invoke commands:

Keyboard Menu Toolbar Shortcut menu TOOL PALETTES*

Learning Objectives

Chapter 1 /Introduction to AutoCAD

Keyboard
You can invoke any AutoCAD command at the keyboard by typing the command name at the Command prompt, and then pressing ENTER or the SPACEBAR. If the Command prompt is not displayed as the last line in the command window area, you must cancel the existing command by pressing Esc (escape) on the keyboard. The following example shows how to invoke the LINE command from the keyboard: Command: LINE or L (L is command alias)

Learning Objectives

Invoking Commands

Chapter 1 /Introduction to AutoCAD

Menu
You can also select commands from the menu. The menu bar that displays the menu bar titles is at the top of the screen. As you move the cursor over the menu bar, different titles are highlighted. You can choose the desired item by pressing the pick button of your pointing device. Once the item is selected, the corresponding menu is displayed directly under the title. Some of the menu items in the menu display an arrow on the right side, which indicates that the menu item has a cascading menu. You can display the cascading menu by moving the arrow pointer over the item and press the pick button.
Learning Objectives

Invoking the ELLIPSE command from the Draw menu

Invoking Commands

Chapter 1 /Introduction to AutoCAD

Toolbar
In Windows, the toolbar is an easy and convenient way to invoke a command. For example, you can invoke the LINE command by choosing the Line button in the Draw toolbar. When you choose a command from the toolbar, the command prompts are displayed in the command window. Toolbars have numerous features that help to control their appearance. Toolbar features include:

Displaying Toolbars Moving and Reshaping Toolbars

The Draw toolbar

Learning Objectives

Invoking Commands

Chapter 1 /Introduction to AutoCAD

Displaying Toolbars
The various toolbars can be displayed by selecting their respective check boxes in the Toolbars tab of the Customize dialog box. The Customize dialog box can be invoked by selecting Toolbars in the View menu. You can also display a toolbar from the shortcut menu by selecting the name of the toolbar. The shortcut menu can be displayed by rightclicking anywhere on any toolbar on the screen.
Learning Objectives

List of toolbars in the Toolbars tab of the Customize dialog box

Toolbar

Chapter 1 /Introduction to AutoCAD

Moving and Reshaping Toolbars
The toolbars can be moved anywhere on the screen by placing the cursor on the title bar area and then dragging it to the desired location. While moving the toolbars you can dock them to the top or sides of the screen by dropping them in the docking area. You can also change the shape of the toolbars by placing the cursor anywhere on the border of the toolbar where it takes the shape of a double arrow, and then pulling it in the desired direction.

Reshaping the Draw toolbar

Learning Objectives

Draw toolbar reshaped

Toolbar

Chapter 1 /Introduction to AutoCAD

Shortcut Menu
AutoCAD has provided shortcut menus as an easy and convenient way of invoking commands. These menus are context sensitive. They are invoked by right-clicking and displayed at the cursor location.

Shortcut menu without an active command Shortcut menu with the POLYLINE command active
Learning Objectives

Shortcut menu for the Layout tab

Chapter 1 /Introduction to AutoCAD

You can also right-click on the command window to display the shortcut menu. This menu displays the six most recently used commands and some of the window options like Copy and Paste. Command line without shortcut menu You can right-click on the status bar to display the shortcut menu. This menu contains the options to change the settings of drawing tools
Learning Objectives

Status bar shortcut menu

Invoking Commands

Chapter 1 /Introduction to AutoCAD

TOOL PALETTES*
AutoCAD has provided TOOL PALETTES as an easy and convenient way of placing and sharing hatch patterns and blocks in the current drawing. By default, AutoCAD displays the Tool Palettes as a window on the right of the drawing area. Also, the TOOL PALETTES window can be turned on or off by either choosing the Tool Palettes button available on the Standard toolbar or by pressing the CTRL and 3 keys.

TOOL PALETTES window

Learning Objectives Invoking Commands

Chapter 1 /Introduction to AutoCAD

 AutoCAD DIALOG BOXES
There are certain commands which when invoked display a dialog box. A dialog box is a convenient method of user interface. For example, Options... in the Tools menu displays the Options dialog box. Any dialog box contains a number of parts like the dialog label, radio buttons, text or edit boxes, check boxes, slider bars, image boxes, and command buttons. These components are also referred to as TILES. Components of a dialog box
Learning Objectives

Chapter 1 /Introduction to AutoCAD

 STARTING A NEW DRAWING
You can open a new drawing using the QNEW command. When you invoke the QNEW command by default, AutoCAD Select will display the template dialog box, as shown in the figure. The dialog box displays a list of the default templates available in AutoCAD 2004. You can select the desired template to open a new drawing that will use the settings of the selected template.
Learning Objectives

Select template dialog box

Chapter 1 /Introduction to AutoCAD

You can also open a new drawing using the Use a Wizard and Start from Scratch options available in the Create New Drawing dialog box. By default, the display of this dialog box is turned off. The display can be turned on using the Options dialog box. The options provided in the Create New Drawing dialog box are discussed next.

Open a Drawing
By default this option is not available. Create New Drawing dialog box

Learning Objectives

Chapter 1 /Introduction to AutoCAD

Start from Scratch
When you choose the Start from Scratch button, AutoCAD provides you with options to start a new drawing that contains the default AutoCAD setup for Imperial (acad.dwt) or Metric drawings (acadiso.dwt). Options that are displayed to start a new drawing when you choose the Start from Scratch button

Learning Objectives

Chapter 1 /Introduction to AutoCAD

Use a Template
When you choose the Use a Template button in the Create New Drawing dialog box, AutoCAD displays a list of templates supplied with AutoCAD, as shown in the figure. The default template file is Acad.dwt or Acadiso.dwt, depending on the installation. If you use a template file, the new drawing will have the same settings as specified in the template file. To differentiate the template files from the drawing files, the template files have .dwt extension whereas the drawing files have .dwg extension.
Learning Objectives

The default templates that are displayed when you choose the Use a Template button

Chapter 1 /Introduction to AutoCAD

Use a Wizard
The Use a Wizard option allows you to set the initial drawing settings before actually starting a new drawing. When you choose the Use a Wizard button, AutoCAD provides you the option of using the Advanced Setup or Quick Setup.

Learning Objectives

The Wizard options that are displayed when you choose the Use a Wizard button

Chapter 1 /Introduction to AutoCAD

Advanced Setup
The Units page is displayed by default as shown in the figure. The Angle page is shown in the figure

The Units page of the Advanced Setup dialog box

Learning Objectives

The Angle page of the Advanced Setup dialog box

Chapter 1 /Introduction to AutoCAD

The Angle Measure page is shown in the figure. The Angle Direction page is shown in the figure

The Angle Measure page of the Advanced Setup dialog box

Learning Objectives

The Angle Direction page of the Advanced Setup dialog box

Advanced Setup

Chapter 1 /Introduction to AutoCAD

The Area page is shown in the figure.

Learning Objectives

The Area page of the Advanced Setup dialog box

Use a Wizard

Chapter 1 /Introduction to AutoCAD

Quick Setup
The Units page opened by default in Quick Setup dialog box as shown in figure. The Area page is displayed as shown in figure.

The Units page of the Quick Setup dialog box

Learning Objectives

The Area page of the Quick Setup dialog box

Use a Wizard

Chapter 1 /Introduction to AutoCAD

 SAVING YOUR WORK
In AutoCAD or any computer system, you must save your work before you exit from the drawing editor or turn the system off. AutoCAD has provided the following commands that allow you save your work on the hard disk of the computer or on the floppy diskette. QSAVE SAVEAS SAVE

Learning Objectives

Different Save options in the File menu

Chapter 1 /Introduction to AutoCAD

When you choose Save from the File menu as shown in the figure the QSAVE command is invoked. If the current drawing is unnamed and you are saving the drawing for the first time in the present session, the QSAVE command will prompt you to enter the file name in the Save Drawing As dialog box. When you invoke the SAVEAS command, the Save Drawing As dialog box is displayed as shown in the figure. Even if the drawing has been saved with a file name, this command gives you an option to save it with a different file name.
Learning Objectives

Save Drawing As dialog box

Chapter 1 /Introduction to AutoCAD

The SAVE command is the most rarely used command and can be invoked only from the command line by entering SAVE at the Command prompt. It is similar to the SAVEAS command and displays the Save Drawing As dialog box always. With this command you can save a previously saved drawing under a different file name, but this command does not set it as the current drawing.

Save Drawing As Dialog Box

The Save Drawing As dialog box displays the information related to the drawing files on your system. The various components of the dialog box are described next.

Places list
A column of icons is displayed on the left side of the dialog box. These icons contain the shortcuts to the folders that are frequently used. You can quickly save your drawings in one of these folders.

Learning Objectives

Chapter 1 /Introduction to AutoCAD

File name edit box
To save your work, enter the name of the drawing in the File Name edit box. This can be done by typing the file name or selecting it from the drop-down list.

Files of type drop-down list

The Files of type drop-down list is used to specify the drawing format in which you want to save the file.

Files of type drop-down list

Save in drop-down list

The current drive and path information is listed in the Save in drop-down list.

Learning Objectives

Save in drop-down list

Chapter 1 /Introduction to AutoCAD

Views List
The Views drop-down list has options for the type of listing of files and displaying the preview images. List Details Thumbnails Preview

Views list

Folder Button
If you choose the Create New Folder button, AutoCAD creates a new directory under the name New Folder. The new folder is displayed in the File list box.

Up One Level Button

The Up one level button displays the directories that are up by one level.

Learning Objectives

Chapter 1 /Introduction to AutoCAD

Search the Web
It displays the Browse the Web dialog box that enables you to access and store AutoCAD files on the Internet.

Tools List
The Tools drop-down list has an option for adding or modifying the FTP sites. The Add Current Folder to Places and Add to Favorites options add the folder displayed in the Save in edit box to the Places list or to the Favorites folder. The Options button displays the Saveas Options dialog box where you can save the proxy images of custom objects. The Security Options button displays the Security Options dialog box, which is used to configure the security options of the drawing.

Tools list

Learning Objectives

Chapter 1 /Introduction to AutoCAD

 AUTOMATIC TIMED SAVE
AutoCAD allows you to save your work automatically at specific intervals. To change the time intervals you can enter the time intervals in minutes in the Minutes between saves text box in the File Safety Precautions area available in the Options dialog box (Open and Save tab). This dialog box can be invoked from the Tools menu.

 CREATION OF BACKUP FILES

If the drawing file already exists and you use SAVE or SAVEAS commands to update the current drawing, AutoCAD creates a backup file. AutoCAD takes the previous copy of the drawing and changes it from a file type .dwg to .bak, and the updated drawing is saved as a drawing file with the .dwg extension.
Learning Objectives

Chapter 1 /Introduction to AutoCAD

 CHANGING AUTOMATIC TIMED SAVED AND BACKUP FILES INTO AutoCAD FORMAT
To change the backup file into an AutoCAD format, open the folder in which you have saved the backup or the automatic timed saved drawing. Choose the Tools > Folder Options from the menu bar to invoke the Folder Options dialog box. Choose the View tab and under the Advanced settings area, clear the Hide file extensions for known file types text box, if selected. Exit the dialog box. Rename the automatic saved drawing or the backup file with a different name and also change the extension of the drawing from .sv$ or .bak to .dwg. After you rename the drawing, you will notice that the icon of the automatic saved drawing or the backup file is replaced by the AutoCAD icon. This indicates that the automatic saved drawing or the backup file is changed into an AutoCAD drawing.

Learning Objectives

Chapter 1 /Introduction to AutoCAD

 CLOSING A DRAWING
You can use the CLOSE command to close the current drawing file without actually quitting AutoCAD. If you choose Close from the File menu or enter CLOSE at the Command prompt, the current drawing file is closed. If you have not saved the drawing after making the last changes to it and you invoke the CLOSE command, AutoCAD displays a dialog box that allows you to save the drawing before closing. After closing the drawing you are still in AutoCAD from where you can open a new or an already saved drawing file. You can also use the close button (X) of the drawing window to close the drawing.

Learning Objectives

Chapter 1 /Introduction to AutoCAD

 OPENING AN EXISTING DRAWING
You can open an existing drawing file that has been saved previously. There are three methods that can be used to open a drawing file, the Select File dialog box, Startup dialog box, and by Dragging and Dropping.

Learning Objectives

Chapter 1 /Introduction to AutoCAD

Opening an Existing Drawing Using the Select File Dialog Box
If you are already in the drawing editor, and you want to open a drawing file you can use the OPEN command. The OPEN command also displays the Select File dialog box as shown in the figure. You can select the drawing to open using this dialog box. This dialog box is similar to the standard dialog boxes.

Select File dialog box

Learning Objectives

Chapter 1 /Introduction to AutoCAD

The Open button has a drop-down list as shown in figure. You can choose a method for opening the file using this drop-down list. These methods are discussed next.

Open Read-Only
If you want to view a drawing without altering it, you must select the Open Read-Only option from the drop-down list.

Open drop-down list

Partial Open
The Partial Open enables you to open only a selected view or a selected layer of a selected drawing. When you choose the Partial Open option from the Open drop-down list, the Partial Open dialog box is displayed, see figure.

Learning Objectives

Partial Open dialog box

Chapter 1 /Introduction to AutoCAD

Using the PARTIALOAD Command
Once you have opened a part of a drawing and made the necessary changes, you may want to load additional objects or layers on the existing ones. This can be done by using the PARTIALOAD command.

Select Initial View

The Select Initial View option allows you to specify the view you want to load initially when AutoCAD loads the drawing. This option will work if the drawing has saved views. This option is generally used while working on a large complicated drawing in which you want to work on a particular portion of the drawing.

Learning Objectives

Chapter 1 /Introduction to AutoCAD

Opening an Existing Drawing Using the Startup Dialog Box
If you have configured the settings to show the Startup dialog box from the Options dialog box, the Startup dialog box is displayed every time you start a new AutoCAD session. The first button in this dialog box is the Open a Drawing button. When you choose this button, a list of the most recently opened drawings is displayed for you to select from, see figure. The Browse button displays the Select File dialog box, which allows you to browse another file. List of recently opened drawings

Learning Objectives

Chapter 1 /Introduction to AutoCAD

 MULTIPLE DOCUMENT ENVIRONMENT (MDE)
The MDE is a Windows feature that allows you to open more than one drawing at a time in one AutoCAD session. This feature is very helpful when you want to work on different drawings simultaneously and make changes to them with reference to each other. The active drawing is specified by the dark blue band in the title bar. You can make any drawing active by simply clicking in it. This type of arrangement is the cascading arrangement and can be changed as per your requirements. If the title bar of a particular drawing is not visible and you want it active, choose the drawing name in the Window menu, see figure.

Cascading arrangement in MDE and the Window menu (c1exm-3.dwg active)

Learning Objectives

Chapter 1 /Introduction to AutoCAD

 QUITTING AutoCAD
You can exit from the AutoCAD program by using the EXIT or QUIT command. Even if you have a drawing file open you can use the EXIT command to close it as well as quit the AutoCAD program. In case the drawing has not been saved, it allows you to save the work first through a dialog box. Note that if you choose No in this dialog box, all the changed made in the current list till the last save will be lost. You can also use the close button (X) of the main AutoCAD window (present in the title bar) to end the AutoCAD session.

Learning Objectives

Chapter 1 /Introduction to AutoCAD

 AutoCAD's HELP
You can get the online help and documentation on the working of AutoCAD 2004 commands from the Help menu, see figure, or by pressing the F1 key. The various options available in the Help menu are discussed next.

Help
Choosing the Help option displays the AutoCAD 2004 Help: User Documentation dialog box as shown in figure.

Help menu

Learning Objectives

Contents Search Ask Me

Index Favorites

AutoCAD 2004 Documentation (Contents tab)

Help: dialog

User box

Chapter 1 /Introduction to AutoCAD

Active Assistance Developer Help New Features Workshop see figure Online Resources About

Learning Objectives

New Features Workshop window

Chapter 1 /Introduction to AutoCAD

 ADDITIONAL HELP RESOURCES
1. 2. 3. You can get help for a command while working by pressing the F1 key. You can get help about a certain dialog box by choosing the Help button in that dialog box. Some of the dialog boxes have a question mark (?) button at the top right corner. You can drop it on any item in the dialog box to display information about that particular item. You can also use the following link to get information on Autodesk products, product updates, and other services provided by Autodesk. a) You Autodesk Web site: http://www.autodesk.com can also get help by contacting [email protected]. the author, Sham Tickoo, at

4.

Learning Objectives