Scribd
Upload
12 views12 pages

GRFU Mapping Between CPRI Ports and Slots

Uploaded by

Ahmed Nagi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
12 views12 pages

GRFU Mapping Between CPRI Ports and Slots

Uploaded by

Ahmed Nagi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 12

For internal use

only

Introduction
Introductionto
tothe
theMapping
MappingBetween
BetweenCPRI
CPRIPorts
Portsand
and
Slots
Slotson
onthe
theGSM
GSM3900
3900Series
SeriesBase
BaseStation
Station
Wireless Product Service Department
Wireless Product Service Department

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 1


Background and Application Principle

Background

 The layout of the CPRI RF cable connection to the GRFU/DRFU slots is usually complex for field engineers.
To reduce the complexity, this material introduces a mapping principle between CRPI ports and slots to
satisfy the requirements of various scenarios. Used together with the GRFU/DRFU configuration principle
and slot planning principle, the application of this principle implements a comparatively fixed mapping
between the CPRI ports and the cell partition for future capacity expansion and maintenance. In addition,
a graphical configuration tool is developed to quickly output the configuration and connection diagram
for on-site project delivery.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 2


Mapping Principle of the CPRI Ports - Single Cabinet

cell1 cell2 cell3


Single Cabinet

 Mapping between CPRI ports


and slots:
Ports CPRI 0 to 5 on the GTMU
correspond to slots 0 to 5
where the
GRFUs/DRFUs are installed.
The CPRI port that corresponds
to an
empty slot need not be
connected.
 Mapping between cells and
slots in single-cabinet
configuration mode:
Slots 0 and 1 correspond to
Cell 1.
Slots 2 and 3 correspond to
Cell 2.
Slots 4 and 5 correspond to
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 3
Cell 3.
Mapping Principle of the CPRI Ports - Two Cabinets
cell1 cell2 cell3

Two Cabinets

 Mapping between CPRI ports and


slots:
Ports CPRI 0, 2, and 4 on the GTMU
correspond to slots 0, 2, and 4
where
the GRFUs/DRFUs are installed in
cabinet 0.
Ports CPRI 1, 3, and 5 on the GTMU
correspond to slots 0, 2, and 4
where
the GRFUs/DRFUs are installed in
cabinet 1.
 Mapping between cells and slots in
double-cabinet configuration mode:
Slots 0 and 1 correspond to Cell 1.
Slots 2 and 3 correspond to Cell 2.
Slots 4 and 5 correspond to Cell 3.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 4
Mapping Principle of the CPRI Ports - Three Cabinets

Three Cabinets
…

 Mapping between CPRI ports and slots:


Ports CPRI 0 and 1 are connected to
the
cell2
first cabinet.
Ports CPRI 2 and 3 are connected to
the
second cabinet.
Ports CPRI 4 and 5 are connected to
the
third cabinet.
The CPRI ports are connected to
slots 0
and 3 where the GRFUs/DRFUs are cell1 cell3
installed in the cabinet that the
ports
correspond to. Other GRFUs/DRFUs
are
cascaded in order.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 5
 Mapping between cells and slots in three-
Benefit I
 Used together with the cell planning principle, the application of this
principle implements comparatively fixed cell partition
corresponding to the CPRI ports, thus implementing a clear cell
partition and simple data configuration. The recommended partition
of three cells is shown as follows:

Cell partition in a single Cell partition in two


cabinet cabinets

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 6


Benefit I

Cell partition in three


cabinets

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 7


Benefit II
 Star interconnection can be applied to the CPRI ports on all the modules so that
great change for the feeder connection is avoided during the capacity expansion.
 In a typical capacity expansion scenario, the configuration data is modified and the

services are not disrupted even if the CPRI networking mode is changed.

Reserve a slot for


capacity expansion.

The corresponding
port is also reserved.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 8


Benefit III

 A useful tool is used to facilitate and standardize operations.

Standardizing on-
site configuration
and connection
operation

Meeting
Huawei Unifying the
requirements configuratio
on delivery Tool n principle
with boards Advantages globally
and cable
connections

Outputting MML
scripts after
being integrated
to the CME in
later versions

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 9


Huawei Technologies | 9
Benefit IV
 Unified Procedures

Complies with the policy of delivery with boards and cabling requirements. Field engineers need not
install modules and connect cables so that the working hour of on-site installation is reduced. Thus,
the service cost reduces.

The tool is used, thus facilitating the data configuration and ensuring the consistency between the
data configuration and the hardware installation.

Accurately locates the slot where the faulty board is located, thus increasing the success rate of
remote problem location.

Implements smooth upgrade and applies globally standardized data configuration to guarantees the
upgrade.

1 2 3 4 5

Delivery Installation Configuration Commissioning Upgrade

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 10


Huawei Technologies | 10
Benefit V

 Consistent principle, applied to different products and the same


product of different versions, complies with the evolution trend of
smooth capacity expansion of the network.
SRANBTS
DBS&BTS39
00
GBTS9.0 V100R002C
00
DBS&BTS39
00
GBTS8.1 V300R009C0
DBS&BTS390 0
0
V300R008C1
1

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 11


Huawei Technologies | 11
Thank you
www.huawei.com

You might also like