Scribd
Upload
11 views

Pabilan Load Combinations

Section 203 outlines load combinations for structural design, detailing various loads such as dead, live, wind, and seismic loads. It provides formulas for calculating critical design loads using Allowable Stress Design (ASD) and Load and Resistance Factor Design (LRFD). An example is included to demonstrate the application of these load combinations in determining critical design loads for a public assembly building.

Uploaded by

Maddie Zonnie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
11 views

Pabilan Load Combinations

Section 203 outlines load combinations for structural design, detailing various loads such as dead, live, wind, and seismic loads. It provides formulas for calculating critical design loads using Allowable Stress Design (ASD) and Load and Resistance Factor Design (LRFD). An example is included to demonstrate the application of these load combinations in determining critical design loads for a public assembly building.

Uploaded by

Maddie Zonnie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 11

Section 203

LOAD
COMBINATIONS
BY: Cielo Pabilan
Section 203.2 Symbols and Notations
• D = Dead Load • R = Rain Load

• E = Earthquake Load
• T = self-straining force and
• = Estimated Maximum
effects resulting from
Earthquake force
temperature change,
• F = Loads due to fluids shrinkage, moisture change,
• H= Loads due to lateral
pressure of soil and creep, settlement
water in the soil • P= Ponding Load

• Lr = Roof live load • W = Load due to wind


pressure
Section 203.3: Load Combinations Using Strength Design or Load
and Resistance Factor Design (LRFD)
Section 203.3.1 Basic Load Combination (LRFD)

1.4 (D + F)
1.2 (D + F + T) + 1.6 (L or H) + 0.5 ( or R)
1.2D + 1.6(Lr or R) + L + (L or 0.5W)
Where;
1.2D + 1.0W + L + 0.5( or R)
= 1.0 for floors in
1.2D + 1.0E + L places of public
assembly, for live
0.9D + 1.0W +1.6H loads in excess of 4.8
kpa, and for garage
live load, or 0.5 for
0.9D +1.0E +1.6H other live loads
Section 203.4.1 Allowable Stress Design (ASD)

D+F
D+H+F+L+T
D + H + F + ( or R)
D + H + F + 0.75 [L + T ( or R)]
D + H + + (0.6W or )
Section 203.4.2 Alternate Basic Load Combination

D + H + F + 0.75 [L + (0.6W or
0.6D + 0.6W + H
0.6D + + H
D + L + ( or R)
D + L + 0.6W
D + L +)
Section 203.5 Special Seismic Load Combination

1.2D + L + 1.0 Where;

= 1.0 for floors in


0.9D 1.0 places of public
assembly, for live
loads in excess of 4.8
kpa, and for garage
live load, or 0.5 for
other live loads
EXAMPLE
1. The compression gravity loads for a public assembly
building have been estimated with the following loads:
Dead load, D= 668KN; live load from roof, = 267KN; and
live load from floors, L=1335KN. Compression wind,
W=312KN; Tensile wind, W=267KN; Seismic compression
load, E=223KN; and Tensile Seismic load, E = 178KN.
Determine the critical design load using the NSCP 2015
load combinations. ASD & LRFD
SOLUTION: ASD
D= 668KN = 312KN
= 267KN = 267KN
L = 1335KN = 223KN
= 178KN

LC1= D + F = 668 + 0 = 668KN


LC2= D + H + F + L + T = 668 + 0 + 0 + 1335 + 0 = 2003KN
LC3=D + H+ F + ( or R) = 668 + 0 + 0 + 267 = 935KN
LC4=D + H + F + 0.75(L+T ( or R)) = 668 + 0 + 0 + 0.75[1335 + 0 (267)] =
1669.25KN
LC5= D + H + + (0.6W or ) = 668KN + 0 + 0 + (0.6(312)) = 855.2KN
Critical Design Load: LC2 =
2003KN
SOLUTION: LRFD
D= 668KN = 312KN = 223KN
= 267KN = 267KN = 178KN
L = 1335KN

LC1:1.4 (D + F) = 1.4 (668) = 935.2 KN


LC2:1.2 (D + F + T) + 1.6 (L or H) + 0.5 ( or R)= 1.2(668) + 1.6(1335) + 0.5(267) =3071.1 K
LC3:1.2D + 1.6(Lr or R) + L + (L or 0.5W) = 1.2(668)+1.6(267)+1.0(1335)+(1.0(1335)) =
3898.8KN
LC4:1.2D + 1.0W + L + 0.5( or R) = 1.2(668) + 1.0(312) + 1.0(1335) + 0.5(267) = 2582.1 K
LC5:1.2D + 1.0E + L = 1.2 (668) + 1.0(223) + 1.0(1335) = 2359.6 KN
LC6:0.9D + 1.0W +1.6H = 0.9 (668) + 1.0(312) = 913.2 KN
LC7:0.9D +1.0E +1.6H = 0.9(668) +1.0(223) = 824.2KN

Critical Design Load: LC3 = 3898.8KN


THANK YOU

You might also like