Scribd
Upload
5 views

PPT lesson 4

The document provides an overview of the multitester, an electronic measuring instrument used for various measurements, including voltage and resistance. It outlines the objectives of the lesson, parts of the multitester, and proper care and maintenance guidelines. Additionally, it includes instructions for reading measurements and a practical exercise for students.

Uploaded by

janethguirueladelista
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
5 views

PPT lesson 4

The document provides an overview of the multitester, an electronic measuring instrument used for various measurements, including voltage and resistance. It outlines the objectives of the lesson, parts of the multitester, and proper care and maintenance guidelines. Additionally, it includes instructions for reading measurements and a practical exercise for students.

Uploaded by

janethguirueladelista
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 20

GOOD

MORNING
GUESS
ME!!!
TESTER
POINTE
THE
MULTITESTER
OBJECTIVE
• At the end of the lesson, atleast 85% of
the students should be able to:
• a) Identify the function of multi tester.
• b) Enumerate the parts of Analog
Multi tester
• c) Explain how to read the scale of
multi tester
MULTITESTER
The Multitester, also known as a VOM (volt-ohm meter or
voltmeter, ohmmeter, milliameter) is an electronic
measuring instrument that combines several
measurement functions in one unit. It is generally made of
two types: analog and digital.
DIGITAL
ANALOG
PARTS OF
• POINTER. The needle-shaped rod that move over
MULTITESTER
the scale of a meter. Pointer It is mechanically
connected to the moving coil. It indicates the
measured values on the multimeter
• SCALE is a series of marking used for reading the
value of a quantity. It can have different types of
scale for voltage and current readings
ADJUSTMENT SCREW makes it possible to
adjust the pointer to the zero position of
the scale.

ZERO-OHM ADJUSTING KNOB is used to


zero-in the pointer
PARTS OF MULTITESTER before measuring
RANGE SELECTOR KNOB (Selector switch) makes
it possible to select different functions and range
of the meter
TEST PROBE positive (red),negative (black) is used
to connect the circuit to the electrical components
being tested
PARTS OF MULTITESTER
PROPER CARE AND MAINTENANCE OF THE MULTI TESTER
1. Read manual of instructions on how to operate the
multi-tester.
2. In reading the amount of voltage, always start with
the highest range to avoid reading voltage higher than the
tester setting.
3. Be sure that the tester is set to the correct range
setting: resistance range when measuring the ohm, voltage
range when measuring voltage and ammeter range when
measuring the value of electric current.
4. Always check the condition of its battery. Worn
out batteries will damage the internal setting of
the tester.
5. When the tester is not in used or will be stored,
set the selector switch to 1000V or to OFF position
6. Never drop the tester.
PROPER CARE AND MAINTENANCE OF THE MULTI TESTER
RANGE VALUE / DIV

Range 50V 1V

Range 10V 0.2V

Range 250V 5V

Range 1000V 20V


DIRECTION. Given a Multitester below, write
he parts indicated by the arrow.
1

6
Direction A: Indicate the voltage reading of the voltmeter below. Write your answer on space provided.

Direction A: Indicate the voltage reading of the voltmeter below. Write your answer on space
provided.

READING: READING:

READING:
READING:
THANK YOU

You might also like