Subnetting / Super netting

and
Classless Addressing
SUBNETTING
IP addresses are designed with
two levels of hierarchy.
Figure 5-1
A network with two levels of
hierarchy (not sub netted)
Figure 5-2
A network with three levels of
hierarchy (subnetted)
Figure 5-3
Addresses in a network with
and without subnetting
Figure 5-4

Hierarchy concept in a telephone number

Figure 5-5
Default mask and subnet mask
Finding the Subnet Address
Given an IP address, we can find the
subnet address the same way we found the
network address in the previous chapter.
We apply the mask to the address. We can
do this in two ways: straight or short-cut.
Straight Method
In the straight method, we use binary
notation for both the address and the
mask and then apply the AND operation
to find the subnet address.
Example 1

What is the subnetwork address if the

destination address is 200.45.34.56 and the
subnet mask is 255.255.240.0?
Solution

11001000 00101101 00100010 00111000

11111111 11111111 11110000 00000000
11001000 00101101 00100000 00000000

The sub network address is 200.45.32.0.

Short-Cut Method
** If the byte in the mask is 255, copy
the byte in the address.
** If the byte in the mask is 0, replace
the byte in the address with 0.
** If the byte in the mask is neither 255
nor 0, we write the mask and the address
in binary and apply the AND operation.
Example 2

What is the sub network address if the

destination address is 19.30.80.5 and the
mask is 255.255.192.0?
Solution
Example 2
Figure 5-7

Comparison of a default mask and

a subnet mask
The number of subnets must be
a power of 2.
Example 3

A company is granted the site address

201.70.64.0 (class C). The company needs
six subnets. Design the subnets.
Solution

The number of 1s in the default

mask is 24 (class C).
Solution (Continued)

The company needs six subnets. This number

6 is not a power of 2. The next number that is
a power of 2 is 8 (23). We need 3 more 1s in
the subnet mask. The total number of 1s in
the subnet mask is 27 (24  3).
The total number of 0s is 5 (32  27). The
mask is
Solution (Continued)

11111111 11111111 11111111 11100000

or
255.255.255.224

The number of subnets is 8.

The number of addresses in each subnet
is 25 (5 is the number of 0s) or 32.
See Figure 5.8
Figure 5-8
Example 3
Example 4

A company is granted the site address

181.56.0.0 (class B). The company needs
1000 subnets. Design the subnets.
Solution

The number of 1s in the default mask is 16

(class B).
Solution (Continued)

The company needs 1000 subnets. This

number is not a power of 2. The next number
that is a power of 2 is 1024 (210). We need 10
more 1s in the subnet mask.
The total number of 1s in the subnet mask is
26 (16  10).
The total number of 0s is 6 (32  26).
Solution (Continued)

The mask is
11111111 11111111 11111111 11000000
or
255.255.255.192.
The number of subnets is 1024.
The number of addresses in each subnet is 26
(6 is the number of 0s) or 64.
See Figure 5.9
Figure 5-9
Example 4
Figure 5-10
Variable-length subnetting
SUPERNETTING
Figure 5-11
A supernetwork
Rules:
** The number of blocks must be a power of 2 (1,
2, 4, 8, 16, . . .).
** The blocks must be contiguous in the address
space (no gaps between the blocks).
** The third byte of the first address in the
superblock must be evenly divisible by the number
of blocks. In other words, if the number of blocks is
N, the third byte must be divisible by N.
Example 5

A company needs 600 addresses. Which of

the following set of class C blocks can be
used to form a supernet for this company?
198.47.32.0 198.47.33.0 198.47.34.0
198.47.32.0 198.47.42.0 198.47.52.0 198.47.62.0
198.47.31.0 198.47.32.0 198.47.33.0 198.47.52.0
198.47.32.0 198.47.33.0 198.47.34.0 198.47.35.0
Solution

1: No, there are only three blocks.

2: No, the blocks are not contiguous.
3: No, 31 in the first block is not divisible by 4.
4: Yes, all three requirements are fulfilled.
 In subnetting,
we need the first address of the
subnet and the subnet mask to
define the range of addresses.
 In supernetting,
we need the first address of
the supernet
and the supernet mask to
define the range of addresses.
Figure 5-12
Comparison of subnet, default,
and supernet masks
Example 6
We need to make a supernetwork out of 16
class C blocks. What is the supernet mask?
Solution
We need 16 blocks. For 16 blocks we need to
change four 1s to 0s in the default mask. So the
mask is
11111111 11111111 11110000 00000000
or
255.255.240.0
Example 7

A supernet has a first address of 205.16.32.0 and a

supernet mask of 255.255.248.0. A router receives three
packets with the following destination addresses:
205.16.37.44
205.16.42.56
205.17.33.76
Which packet belongs to the supernet?
Solution

We apply the supernet mask to see if we can find

the beginning address.
205.16.37.44 AND 255.255.248.0205.16.32.0
205.16.42.56 AND 255.255.248.0 205.16.40.0
205.17.33.76 AND 255.255.248.0 205.17.32.0
Only the first address belongs to this supernet.
Example 8
A supernet has a first address of 205.16.32.0 and a
supernet mask of 255.255.248.0. How many blocks are in
this supernet and what is the range of addresses?

Solution

The supernet has 21 1s. The default mask has 24

1s. Since the difference is 3, there are 2 3 or 8
blocks in this supernet. The blocks are 205.16.32.0
to 205.16.39.0. The first address is 205.16.32.0.
The last address is 205.16.39.255.
CLASSLESS
ADDRESSING
Figure 5-13

Variable-length blocks
Number of Addresses in a Block
There is only one condition on the number
of addresses in a block; it must be a power
of 2 (2, 4, 8, . . .). A household may be
given a block of 2 addresses. A small
business may be given 16 addresses. A large
organization may be given 1024 addresses.
Beginning Address
The beginning address must be evenly divisible
by the number of addresses. For example, if a
block contains 4 addresses, the beginning
address must be divisible by 4. If the block has
less than 256 addresses, we need to check only
the rightmost byte. If it has less than 65,536
addresses, we need to check only the two
rightmost bytes, and so on.
Example 9
Which of the following can be the beginning address of a
block that contains 16 addresses?
205.16.37.32
190.16.42.44
17.17.33.80
123.45.24.52
Solution

The address 205.16.37.32 is eligible because 32 is

divisible by 16. The address 17.17.33.80 is eligible
because 80 is divisible by 16.
Example 10
Which of the following can be the beginning address of a
block that contains 1024 addresses?
205.16.37.32
190.16.42.0
17.17.32.0
123.45.24.52

Solution
To be divisible by 1024, the rightmost byte of an
address should be 0 and the second rightmost byte
must be divisible by 4. Only the address 17.17.32.0
meets this condition.
Figure 5-14
Slash notation
Slash notation is also called
CIDR
notation.
Example 11
A small organization is given a block with the beginning
address and the prefix length 205.16.37.24/29 (in slash
notation). What is the range of the block?

Solution
The beginning address is 205.16.37.24. To find the
last address we keep the first 29 bits and change
the last 3 bits to 1s.
Beginning:11001111 00010000 00100101 00011000
Ending : 11001111 00010000 00100101 00011111
There are only 8 addresses in this block.
Example 12
We can find the range of addresses in Example 11 by
another method. We can argue that the length of the
suffix is 32  29 or 3. So there are 23  8 addresses in this
block. If the first address is 205.16.37.24, the last address
is 205.16.37.31 (24  7  31).
 A block in classes A, B, and C
can easily be represented in slash
notation as
A.B.C.D/ n
where n is
either 8 (class A), 16 (class B), or
24 (class C).
Example 13
What is the network address if one of the addresses is
167.199.170.82/27?

Solution
The prefix length is 27, which means that we must
keep the first 27 bits as is and change the
remaining bits (5) to 0s. The 5 bits affect only the
last byte. The last byte is 01010010. Changing the
last 5 bits to 0s, we get 01000000 or 64. The
network address is 167.199.170.64/27.
Example 14
An organization is granted the block 130.34.12.64/26.
The organization needs to have four subnets. What are the
subnet addresses and the range of addresses for each
subnet?

Solution

The suffix length is 6. This means the total number

of addresses in the block is 64 (2 6). If we create
four subnets, each subnet will have 16 addresses.
Solution (Continued)
Let us first find the subnet prefix (subnet mask).
We need four subnets, which means we need to
add two more 1s to the site prefix. The subnet
prefix is then /28.
Subnet 1: 130.34.12.64/28 to 130.34.12.79/28.
Subnet 2 : 130.34.12.80/28 to 130.34.12.95/28.
Subnet 3: 130.34.12.96/28 to 130.34.12.111/28.
Subnet 4: 130.34.12.112/28 to 130.34.12.127/28.
See Figure 5.15
Figure 5-15
Example 14
Example 15
An ISP is granted a block of addresses starting with
190.100.0.0/16. The ISP needs to distribute these
addresses to three groups of customers as follows:

1. The first group has 64 customers; each needs 256 addresses.

2. The second group has 128 customers; each needs 128 addresses.

3. The third group has 128 customers; each needs 64 addresses .

Design the subblocks and give the slash notation for each
subblock. Find out how many addresses are still available
after these allocations.
Solution
Group 1
For this group, each customer needs 256 addresses.
This means the suffix length is 8 (2 8  256). The
prefix length is then 32  8  24.
01: 190.100.0.0/24190.100.0.255/24
02: 190.100.1.0/24 190.100.1.255/24
…………………………………..
64: 190.100.63.0/24190.100.63.255/24
Total  64  256  16,384
Solution (Continued)
Group 2
For this group, each customer needs 128 addresses.
This means the suffix length is 7 (2 7  128). The
prefix length is then 32  7  25. The addresses
are:
001: 190.100.64.0/25 190.100.64.127/25
002: 190.100.64.128/25 190.100.64.255/25
003: 190.100.127.128/25 190.100.127.255/25
Total  128  128  16,384
Solution (Continued)
Group 3
For this group, each customer needs 64 addresses.
This means the suffix length is 6 (2 6  64). The
prefix length is then 32  6  26.
001:190.100.128.0/26 190.100.128.63/26
002:190.100.128.64/26 190.100.128.127/26
…………………………
128:190.100.159.192/26 190.100.159.255/26
Total  128  64  8,192
Solution (Continued)

Number of granted addresses: 65,536

Number of allocated addresses: 40,960
Number of available addresses: 24,576