0% found this document useful (0 votes)
7 views

Microscope Parts and Functions

The document outlines the parts and functions of a microscope, including the arm, base, eyepiece, body tube, and various knobs for adjustment. It also describes the proper way to focus a microscope, emphasizing the use of the coarse and fine adjustment knobs and the importance of starting with the lowest power objective. Additionally, it provides guidelines for handling the microscope safely and effectively.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
7 views

Microscope Parts and Functions

The document outlines the parts and functions of a microscope, including the arm, base, eyepiece, body tube, and various knobs for adjustment. It also describes the proper way to focus a microscope, emphasizing the use of the coarse and fine adjustment knobs and the importance of starting with the lowest power objective. Additionally, it provides guidelines for handling the microscope safely and effectively.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 11

Microscope Parts and Functions

Microscope
• An optical instrument that uses a lens or a
combination of lenses to produce magnified
images of small objects, especially of objects
too small to be seen by the unaided eye.
Microscope Parts and Functions
• Arm- Supports the tube and connects it to the
base
• Base- The bottom of the microscope, used for
support
• Eyepiece- Where you look to see the image of
your specimen.
Microscope Parts and Functions
• Body tube- Connects the eyepiece to the
objective lenses.
• Revolving Nosepiece- This is the part that
holds two or more objective lenses and can be
rotated to easily change power.
• Stage- The flat platform where you place your
slides.
Microscope Parts and Functions
• Fine Adjustment Knob-small, round knob on
the side of the microscope used to fine-tune
the focus of your specimen
• Coarse Adjustment Knob--large, round knob
on the side of the microscope used for
focusing the specimen.
• Stage Clips-hold the slide in place
Microscope Parts and Functions
• Iris Diaphragm- controls the light going
thorough the aperture.
• Mirror/Light source-used to reflect light to the
specimen/source of light.
• Objective lenses-may have (scanner, Low, high
Oil immersion objectives) and is used use to
increase the magnification of the specimen.
Microscope Parts and Functions
• Condenser is used to collect and focus the
light from the illuminator on to the specimen.
It is located under the stage
Always observe the specimen or object using the
LOWEST POWER object first.
Focus using the COARSE ADJUSTMENT KNOB
to bring the object into focus. Bring the object
into sharp focus by using the fine adjustment
knob.
Proper Way of Focusing the
Microscope
• Focus, and then move to a higher power
objective, if needed.
• Use only the FINE ADJUSTMENT KNOB when
using the HIGHEST (longest) POWER
OBJECTIVE.
Proper Way of Focusing the
Microscope
• Keep both eyes open to reduce eyestrain.
Keep eye slightly above the eyepiece to
reduce eyelash interference.
• To find out the total magnification of the
object, multiply the power of the eyepiece
lens (10X) by the power of the objective.
Handling the Microscope
• Always use two hands to move the
microscope. Place one hand around the arm,
lift the scope, and then put your other hand
under the base of the scope for support.
• Be gentle.

You might also like