IP Addresses

IP Addresses:
Classful Addressing
 CONTENT
S
• INTRODUCTION
• CLASSFUL ADDRESSING
• Different Network Classes
• Subnetting
• Classless Addressing
• Supernetting
• CIDR (classless Interdomain Routing)
4.
1
INTRODUCTIO
N
What is an IP Address?

An IP address is a
32-bit
address.

The IP addresses
are
unique.
Address Space
…………..
addr ………….
.
1 addr …………. addr1
5 ………….
2
…………. . .
. addr4 addr22
addr3 1 ………….6
…………. 1
. .
 Address space
rule
addr ………….
…………..

.
1 addr …………. addr1
The address space 5in a protocol
………….
2 uses. N-bits to define an.
………….
That
.
Address is: addr4 addr22
addr3 1 6
…………. 2N ………….
1
. .
IPv4 address
space
The address space of IPv4 is
232
or
4,294,967,296.
 Binary Notation

01110101 10010101 00011101 11101010

Figure 4-1

Dotted-decimal
notation
 Hexadecimal
Notation

0111 0101 1001 0101 0001 1101 1110 1010

75 95 1D
EA
0x75951DE
A
 Example 1

Change the following IP address from binary

notation to dotted-decimal notation.
10000001 00001011 00001011 11101111

Solution

129.11.11.239
 Example 2

Change the following IP address from

dotted-decimal notation to binary
notation:
111.56.45.78
Solution

01101111 00111000 00101101 01001110

 Example 3

Find the error in the following IP Address

111.56.045.78

Solution

There are no leading zeroes in

Dotted-decimal notation (045)
 Example 3 (continued)

Find the error in the following IP Address

75.45.301.14

Solution

In decimal notation each number <= 255

301 is out of the range
 Example 4

Change the following binary IP address

Hexadecimal notation
10000001 00001011 00001011 11101111

Solution

0X810B0BEF or 810B0BEF16
Change following IP address from binary notation
to dotted decimal notation

a) 11000001 10000011 00011011 11111111

b) 11100111 11011011 10001011 01101111

c) 11111001 10011011 11111011 00001111

CLASSFUL
ADDRESSIN
G
Figure 4-2

Occupation of the address

space
In classful addressing the address space is
divided into 5 classes:

A, B, C, D, and E.
Figure 4-3

Finding the class in binary

notation
Figure 4-4

Finding the address class

 Example 5

Show that Class A has

231 = 2,147,483,648 addresses
 Example 6

Find the class of the following IP addresses

00000001 00001011 00001011 11101111
11000001 00001011 00001011 11101111

Solution

• 00000001 00001011 00001011 11101111

1st is 0, hence it is Class A
• 11000001 00001011 00001011 11101111
1st and 2nd bits are 1, and 3rd bit is 0 hence, Class C
Figure 4-5

Finding the class in decimal

notation
 Example 7

Find the class of the following addresses

158.223.1.108
227.13.14.88

Solution
• 158.223.1.108
1st byte = 158 (128<158<191) class B
• 227.13.14.88
1st byte = 227 (224<227<239) class D
IP address with appending port number

● 158.128.1.108:25
● the for octet before colon is the IP address
● The number of colon (25) is the port number
Figure 4-6

Netid and
hostid
Figure 4-7
Blocks in class A
Millions of class A addresses
are wasted.
Figure 4-8

Blocks in class
B
Many class B addresses
are wasted.
Figure 4-9
Blocks in class
C
 The number of addresses in
a class C block
is smaller than
the needs of most organizations.
 Class D addresses
are used for multicasting;
there is only
one block in this class.
Class E addresses are reserved
for special purposes;
most of the block is wasted.
Network Addresses

The network address is the first address.

The network address defines the network to the

rest of the Internet.
Given the network address, we can find the
class of the address, the block, and the range of
the addresses in the block
 In classful addressing,
the network address
(the first address in the block)
is the one that is assigned
to the organization.
 Example 8

Given the network address 132.21.0.0, find the

class, the block, and the range of the
addresses

Solution
The 1st byte is between 128 and 191.
Hence, Class B
The block has a netid of 132.21.
The addresses range from
132.21.0.0 to 132.21.255.255.
 Mask

• A mask is a 32-bit binary number.

• The mask is ANDeD with IP address to get
• The bloc address (Network address)
• Mask And IP address = Block Address
Figure 4-10

Masking
concept
Figure 4-11

AND
operation
 The network address is the
beginning address of each block.
It can be found by applying
the default mask to
any of the addresses in the block
(including itself).
It retains the netid of the block
and sets the hostid to zero.
Default Mak

● Class A default mask is 255.0.0.0

● Class B default mask is 255.255.0.0
● Class C Default mask 255.255.255.0
Chapter 5

Subnetting/
Supernetting
and
Classless Addressing
 CONTENT
S
• SUBNETTING
• SUPERNETTING
• CLASSLESS ADDRSSING
5.
1
SUBNETTIN
G
IP addresses are designed with
two levels of hierarchy.
Figure 5-1

A network with two levels of

hierarchy (not subnetted)
Figure 5-2
A network with three levels of
hierarchy (subnetted)
Note

● Subnetting is done by borrowing bits from the

host part and add them the network part
Figure 5-3
Addresses in a network with
and without subnetting
Figure 5-5
Default mask and subnet
mask
 Finding the Subnet Address

Given an IP address, we can find the

subnet address the same way we found the
network address. We apply the mask to the
address. We can do this in two ways:
straight or short-cut.
Straight Method
In the straight method, we use binary
notation for both the address and the
mask and then apply the AND operation
to find the subnet address.
 Example 9

What is the subnetwork address if the

destination address is 200.45.34.56 and the
subnet mask is 255.255.240.0?
 Solution

11001000 00101101 00100010 00111000

11111111 11111111 11110000 00000000
11001000 00101101 00100000 00000000

The subnetwork address is 200.45.32.0.

Short-Cut Method
** If the byte in the mask is 255, copy
the byte in the address.
** If the byte in the mask is 0, replace
the byte in the address with 0.
** If the byte in the mask is neither 255
nor 0, we write the mask and the address
in binary and apply the AND operation.
 Example 10

What is the subnetwork address if the

destination address is 19.30.80.5 and the
mask is 255.255.192.0?
Solution

See next slide

Figure 5-6

Solution
Figure 5-7

Comparison of a default mask and

a subnet mask
The number of subnets must be
a power of 2.
 Example 11

A company is granted the site address

201.70.64.0 (class C). The company needs
six subnets. Design the subnets.

Solution

The number of 1s in the default

mask is 24 (class C).
 Solution (Continued)

The company needs six subnets. This number

6 is not a power of 2. The next number that is
a power of 2 is 8 (23). We need 3 more 1s in
the subnet mask. The total number of 1s in
the subnet mask is 27 (24 + 3).
The total number of 0s is 5 (32 − 27). The
mask is
 Solution (Continued)

11111111 11111111 11111111 11100000

or
255.255.255.224
The number of subnets is 8.
The number of addresses in each subnet is 25 (5 is the
number of 0s) or 32.
See Next slide
Figure 5-8
Example
3
 Example 12

A company is granted the site address

181.56.0.0 (class B). The company needs
1000 subnets. Design the subnets.
Solution

The number of 1s in the default mask is 16

(class B).
 Solution (Continued)

The company needs 1000 subnets. Thi

number is not a power of 2. The next numbe
that is a power of 2 is 1024 (210). We need 10
more 1s in the subnet mask.
The total number of 1s in the subnet mask i
26 (16 + 10).
The total number of 0s is 6 (32 − 26).
 Solution (Continued)
The mask is

11111111 11111111 11111111 11000000

or
255.255.255.192.
The number of subnets is 1024.
The number of addresses in each subnet is 26
(6 is the number of 0s) or 64.
See next slide
Figure 5-9
Example
4
Figure 5-10

Variable-length subnetting
SUPERNETTIN
G
What is suppernetting?

● Supernetting is the opposite of subnetting

● In subnetting you borrow bits from the host
part
● Supernetting is done by borrowing bits from
the network side.
● And combine a group of networks into one
large supernetwork.
Figure 5-11

A supernetwork
Rules:
▲ The number of blocks must be a power of 2 (1,
2, 4, 8, 16, . . .).
▲ The blocks must be contiguous in the address
space (no gaps between the blocks).
▲ The third byte of the first address in the
superblock must be evenly divisible by the number
of blocks. In other words, if the number of blocks is
N, the third byte must be divisible by N.
 Example 5

A company needs 600 addresses. Which of

the following set of class C blocks can be
used to form a supernet for this company?
198.47.32.0 198.47.33.0 198.47.34.0
198.47.32.0 198.47.42.0 198.47.52.0 198.47.62.0
198.47.31.0 198.47.32.0 198.47.33.0 198.47.52.0
198.47.32.0 198.47.33.0 198.47.34.0 198.47.35.0
 Solution

1: No, there are only three blocks.

2: No, the blocks are not contiguous.
3: No, 31 in the first block is not divisible by 4.
4: Yes, all three requirements are fulfilled.
 In subnetting,
we need the first address of the
subnet and the subnet mask to
define the range of addresses.
 In supernetting,
we need the first address of
the supernet
and the supernet mask to
define the range of addresses.
Figure 5-12
Comparison of subnet, default,
and supernet masks
 Example 13

We need to make a supernetwork out of 16

class C blocks. What is the supernet mask?
Solution
We need 16 blocks. For 16 blocks we need to change four 1s to 0s in
the default mask. So the mask is
11111111 11111111 11110000 00000000
or
255.255.240.0
 Example 14

A supernet has a first address of 205.16.32.0 and a

supernet mask of 255.255.248.0. A router receives three
packets with the following destination addresses:
205.16.37.44
205.16.42.56
205.17.33.76
Which packet belongs to the supernet?
 Solution

We apply the supernet mask to see if we can find

the beginning address.
205.16.37.44 AND 255.255.248.0 🡺 205.16.32.0
205.16.42.56 AND 255.255.248.0 🡺 205.16.40.0
205.17.33.76 AND 255.255.248.0 🡺 205.17.32.0
Only the first address belongs to this supernet.
 Example 15

A supernet has a first address of 205.16.32.0 and a

supernet mask of 255.255.248.0. How many blocks are in
this supernet and what is the range of addresses?

Solution
The supernet has 21 1s. The default mask has 24 1s. Since
the difference is 3, there are 23 or 8 blocks in this supernet.
The blocks are 205.16.32.0 to 205.16.39.0. The first
address is 205.16.32.0. The last address is 205.16.39.255.
5.
3
CLASSLESS
ADDRESSIN
G
Figure 5-13

Variable-length blocks
Number of Addresses in a Block
There is only one condition on the number
of addresses in a block; it must be a power
of 2 (2, 4, 8, . . .). A household may be
given a block of 2 addresses. A small
business may be given 16 addresses. A large
organization may be given 1024 addresses.
Beginning Address
The beginning address must be evenly divisible
by the number of addresses. For example, if a
block contains 4 addresses, the beginning
address must be divisible by 4. If the block has
less than 256 addresses, we need to check only
the rightmost byte. If it has less than 65,536
addresses, we need to check only the two
rightmost bytes, and so on.
 Example 16

Which of the following can be the beginning address of a block

that contains 1024 addresses?
205.16.37.32
190.16.42.0
17.17.32.0
123.45.24.52

Solution
To be divisible by 1024, the rightmost byte of an address should be 0
and the second rightmost byte must be divisible by 4. Only the
address 17.17.32.0 meets this condition.
Figure 5-14
Slash
notation
Slash notation is also called
CIDR
notation.
 Example 17

A small organization is given a block with the beginning

address and the prefix length 205.16.37.24/29 (in slash
notation). What is the range of the block?
 Solution

● The beginning address is 205.16.37.24. To

find the last address we keep the first 29 bits
and change the last 3 bits to 1s.
● Beginning: 11001111 00010000 00100101 00011000
● Ending : 11001111 00010000 00100101 00011111
● There are only 8 addresses in this block.
 Example 17 cont’d

We can find the range of addresses in Example 17 by

another method. We can argue that the length of the suffix
is 32 − 29 or 3. So there are 23 = 8 addresses in this
block. If the first address is 205.16.37.24, the last address
is 205.16.37.31 (24 + 7 = 31).
 A block in classes A, B, and C
can easily be represented in slash
notation as
A.B.C.D/ n
where n is
either 8 (class A), 16 (class B), or
24 (class C).
 Example 18
What is the network address if one of the addresses is
167.199.170.82/27?

Solution

The prefix length is 27, which means that we must

keep the first 27 bits as is and change the
remaining bits (5) to 0s. The 5 bits affect only the
last byte. The last byte is 01010010. Changing the
last 5 bits to 0s, we get 01000000 or 64. The
network address is 167.199.170.64/27.
Example 19
An organization is granted the block 130.34.12.64/26. The
organization needs to have four subnets. What are the subnet
addresses and the range of addresses for each subnet?

Solution

The suffix length is 6. This means the total number

of addresses in the block is 64 (2 6). If we create
four subnets, each subnet will have 16 addresses.
Solution (Continued)

Let us first find the subnet prefix (subnet mask). We need four
subnets, which means we need to add two more 1s to the site prefix.
The subnet prefix is then /28.
Subnet 1: 130.34.12.64/28 to 130.34.12.79/28.
Subnet 2 : 130.34.12.80/28 to 130.34.12.95/28.
Subnet 3: 130.34.12.96/28 to 130.34.12.111/28.
Subnet 4: 130.34.12.112/28 to 130.34.12.127/28.

See Figure 5.15

Figure 5-15

Example 19
cont’d
 Example 20

An ISP is granted a block of addresses starting with

190.100.0.0/16. The ISP needs to distribute these addresses to three
groups of customers as follows:
1. The first group has 64 customers; each needs 256 addresses.
2. The second group has 128 customers; each needs 128 addresses.
3. The third group has 128 customers; each needs 64 addresses.

Design the subblocks and give the slash notation for each subblock.
Find out how many addresses are still available after these
allocations.
 Solution

Group 1
For this group, each customer needs 256 addresses. This means th
suffix length is 8 (28 = 256). The prefix length is then 32 − 8 = 24
01: 190.100.0.0/24 🡺190.100.0.255/24
02: 190.100.1.0/24 🡺190.100.1.255/24
…………………………………..
64: 190.100.63.0/24🡺190.100.63.255/24
Total = 64 × 256 = 16,384
 Solution (Continued)

Group 2
For this group, each customer needs 128 addresses. This means the
suffix length is 7 (27 = 128). The prefix length is then 32 − 7 = 25
The addresses are:
001: 190.100.64.0/25 🡺190.100.64.127/25
002: 190.100.64.128/25 🡺190.100.64.255/25
………………..
128: 190.100.127.128/25 🡺190.100.127.255/25
Total = 128 × 128 = 16,384
 Solution (Continued)

Group 3
For this group, each customer needs 64 addresses. This means the
suffix length is 6 (26 = 64). The prefix length is then 32 − 6 = 26.
001:190.100.128.0/26 🡺190.100.128.63/26
002:190.100.128.64/26 🡺190.100.128.127/26
…………………………
128:190.100.159.192/26 🡺190.100.159.255/26
Total = 128 × 64 = 8,192
 Solution (Continued)

Number of granted addresses: 65,536

Number of allocated addresses: 40,960
Number of available addresses: 24,576