Scribd
Upload
180 views

ECE 1231 Electronics: Dept. of Electrical and Computer Engineering International Islamic University Malaysia

Electronics is the art and science of directing electrons or charges to do work. Each electronic component performs a specific function such as to amplify, to filter. Etc Connections of several electronic components in a loop form an electric circuit.

Uploaded by

Arap Dom
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
180 views

ECE 1231 Electronics: Dept. of Electrical and Computer Engineering International Islamic University Malaysia

Electronics is the art and science of directing electrons or charges to do work. Each electronic component performs a specific function such as to amplify, to filter. Etc Connections of several electronic components in a loop form an electric circuit.

Uploaded by

Arap Dom
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 21

ECE 1231 Electronics

Dept. of Electrical and Computer Engineering International Islamic University Malaysia

Chapter 1 Prologue to Electronics

Definitions

1-3

Electronics is the art and science of directing electrons or charges to do work. Each electronic component performs a specific function such as to amplify, to filter.. etc Connections of several electronic components in a loop form an electric circuit
ECE 1231

Electronics

Importance

1-4

We are currently living in what is known as the Information Age. The advances that we made in the areas of Communications and Computers are largely due to ELECTRONICS! Electronics is perhaps present everywhere around us. For example, a single individual carries several electronic gadgets such as a wrist-watch, cell-phone, PDA, laptop.. etc
ECE 1231

Electronics

Electronic Systems

1-5

Electronic systems are composed of subsystems or functional blocks.


These functional blocks can be categorized as follows:
Amplifiers: increase the power level of weak signals. Filters: separate desired signals from undesired signals . Signal Sources: generate waveforms. Wave-Shaping Circuits: change one waveform into another. Digital Logic Functions: process digital signals. Power Supplies: provide necessary dc power to functional blocks. Converters: change signals from analog form to digital or vice versa.

Electronics

ECE 1231

Electronic-System Block Diagrams

1-6

Block diagram of a simple electronic system: an AM radio

Electronics

ECE 1231

System Design
Typical flowchart for design of electronic systems

1-7

Electronics

ECE 1231

Circuit Design
Flowchart of the circuit-design process

1-8

Electronics

ECE 1231

Brief History
The development of the transistor and the integrated circuit has led to remarkable electronic capabilities. In December 1947 First transistor was demonstrated at Bell Telephone Laboratories by William Shockley, John Bardeen and Walter Brattain.

1-9

Electronics

ECE 1231

Brief History
In September 1958 First integrated circuit fabricated in germanium was demonstrated at Texas Instruments by Jack Kilby. At about the same time, Robert Noyce of Fairchild Semiconductor introduced the integrated circuit in silicon. Integrated Circuits is a novel technology where not only active devices such as transistors can be fabricated on silicon, resistors and capacitors can be fabricated on the same substrate. Now MANY components can be fit on the same wafer. Electronics

1-10

ECE 1231

Brief History
Integrated Circuits is a novel technology where not only active devices such as transistors can be fabricated on silicon, resistors and capacitors can be fabricated on the same substrate. Now MANY components can be fit on the same wafer.

1-11

Electronics

ECE 1231

Brief History

1-12

The development of the IC continued at a rapid through the 1960s. Today, an IC can contain arithmetic, logic and memory functions on a single semiconductor chip. Microelectronics science of manufacturing micron sized electronics

1958 First silicon transistor by Robert Noyce Electronics

1981 - Intel 8088 Microprocessor 29 000 transistors

2008 Intels Nano Atom 5 mm x 5 mm 47 million transistors

ECE 1231

Electronic Components

1-13

Passive Devices
NO Power required Ex: Resistors, capacitors and inductors.

Active Devices
Require Power Ex: Amplifier, diodes, power supplies, batteries and ac signal generators.
ECE 1231

Electronics

Passive Devices
Capacitor

1-14

Capacitor

Resistor

Electronics

ECE 1231

Active Component : Diode

1-15

Electronics

ECE 1231

Active Component : BJT

1-16

Electronics

ECE 1231

Electronic Circuits
In most electronic circuits

1-17

There are two inputs. One input is from a power supply that provides dc voltages and currents to establish the proper biasing for the transistor. The second input is a signal that can be amplified by the circuit.

Electronics

The output signal can be larger than the input signal. The output power can never exceed the dc input power.

ECE 1231

Discrete and Integrated Circuits


Discrete Circuits Circuits that contain discrete components, such as resistor, capacitors and transistors. Integrated Circuits Circuits that are the building blocks of IC. For example, circuits that make up the operational amplifier, an important IC in analog electronics. Various logic circuits used in digital ICs.

1-18

Electronics

ECE 1231

Analog and Digital Signals


Analog Signals
The magnitude of an analog signal may have any value. The amplitude may vary continuously with respect to time. Electronic circuits that process such signals are called analog circuits. An alternative signal is at one of two distinct levels and is called a digital signal. The digital signal has discrete values, it is said to be quantized. Electronic circuits that process digital signals are called digital circuits.

1-19

Digital Signals

Electronics

ECE 1231

Notation

1-20

A lowercase letter with an uppercase subscript indicates a total instantaneous value. An uppercase letter with an uppercase subscript indicates a dc quantity. A lowercase letter with a lowercase subscript indicates an instantaneous value of a timevarying signals. An uppercase letter with a lowercase subscript indicates a phasor quantity.

Electronics

ECE 1231

Notation

1-21

Electronics

ECE 1231

You might also like