Scribd
Upload
60 views

Lecture 1

This document discusses different types of fuels and their analysis. It describes three main types of fuels - solid, liquid, and gaseous. Coal is classified based on its composition and geological age into anthracite, bituminous, and lignite. Liquid fuels like petrol and diesel are obtained from petroleum. The ultimate analysis gives the chemical composition of fuels while the proximate analysis indicates the percentages of fixed carbon, volatile matter, ash, and moisture in fuels. Different fuels have varying compositions affecting their combustion properties.

Uploaded by

Yogesh Patil
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
60 views

Lecture 1

This document discusses different types of fuels and their analysis. It describes three main types of fuels - solid, liquid, and gaseous. Coal is classified based on its composition and geological age into anthracite, bituminous, and lignite. Liquid fuels like petrol and diesel are obtained from petroleum. The ultimate analysis gives the chemical composition of fuels while the proximate analysis indicates the percentages of fixed carbon, volatile matter, ash, and moisture in fuels. Different fuels have varying compositions affecting their combustion properties.

Uploaded by

Yogesh Patil
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 8

UNIT - I

FUELS AND COMBUSTION


A fuel is a simply combustible substance. It burns in

presence of oxygen and releases heat energy.


Most of the Fuels contain carbon and hydrogen, thus they

are called the hydrocarbon fuels.

Types of fuel
Solid Fuel (Coal) Liquid Fuel Gaseous Fuel

Coal classification
Coal is classified into three major types namely anthracite, bituminous,

and lignite. However, there is no clear demarcation between them. Coal is further classified as semi-anthracite, semi-bituminous, and subbituminous. Anthracite is the oldest coal from a geological perspective. It is a hard coal composed mainly of carbon with little volatile content and practically no moisture. Lignite is the youngest coal from a geological perspective. It is a soft coal composed mainly of volatile matter and moisture content with low fixed carbon. Fixed carbon refers to carbon in its free state, not combined with other elements. Volatile matter refers to those combustible constituents of coal that vaporize when coal is heated.

Liquid fuels
Liquid fuels: Fuels in liquid form are called liquid fuels. Liquid fuels are generally obtained from petroleum and its by-

products.
These liquid fuels are complex mixture of different hydrocarbons,

and obtained by refining the crude petroleum oil.


Commonly used liquid fuels are petrol, kerosene diesel, aviation

fuel, light fuel oil, heavy fuel oil etc.


Various liquid fuels of hydrocarbon family lie in Paraffin (CnH2n +

2 chain structure), Olefins (CnH2n chain structure), Napthalene (CnH2n ring structure), Benzene (CnH2n 6 ring structure), Nepthalene (CnH2n 12 ring structure) category.

Ultimate analysis
The ultimate analysis gives the accurate chemical analysis by mass

of important elements of fuel such as Carbon, Hydrogen, Oxygen, Sulphur etc. It is useful in determining the quantity of air required for combustion and the volume and composition of the gases. Following table show ultimate analysis of various coal.
Fuel Percentage by mass of dry fuel O2 N2 S Rank C H2 Mineral matter

Anthracite
Medium rank coal

101
401

88.2
81.8 75.0

2.7
4.9 4.6

1.7
4.4 10.7

1.0
1.8 1.6

1.2
1.9 2.1

5.2
5.2 6.0

Low rank coal 902

Proximate analysis
The proximate analysis indicates the percentage by weight

of fixed carbon, volatiles, ash, and moisture content in coal. The amounts of fixed carbon and volatile combustible matter directly contribute to the heating value of coal. Fixed carbon acts as a main heat generator during burning. High volatile matter content indicates easy ignition of fuel.

Fixed carbon: Fixed carbon is the solid fuel left in the furnace after volatile matter is distilled off. It consists mostly of carbon but also contains some hydrogen, oxygen, sulphur and nitrogen not driven off with the gases. Fixed carbon gives a rough estimate of the heating value of coal. Volatile matter: Volatile matters are the methane, hydrocarbons, hydrogen and carbon monoxide, and incombustible gases like carbon dioxid e and nitrogen found in coal. Thus the volatile matter is an index of the gaseous fuels present. A typical range of volatile matter is 20 to 35%. Volatile matter: Proportionately increases flame length, and helps in easier ignition of coal Sets minimum limit on the furnace height and volume Influences secondary air requirement and distribution aspects Influences secondary oil support

Ash content: Ash is an impurity that will not burn. Typical range is 5% to 40%. Ash Reduces handling and burning capacity

Increases handling costs


Affects combustion efficiency and boiler efficiency Causes clinkering and slagging Moisture content: Moisture in coal must be transported, handled and stored. Since it

replaces combustible matter, it decreases the heat content per kg of coal. Typical range is 0.5 to 10%. Moisture: Increases heat loss, due to evaporation and superheating of vapour Helps to a certain extent with binding fines Aids radiation heat transfer

Proximate analysis of various coal


Fuel Percentage by mass of fuel Inherent Volatile Fixed moisture % matter % carbon% 6 21 75 35 Ash % 17 38

Anthracite 2 Bituminous 6 coal

Indonesia coal

30

47

14

You might also like