Scribd
Upload
1K views6 pages

MV Project Ericsson Network: Capacity Management

The document is a report from Huawei Technologies discussing power capacity management issues affecting an Ericsson mobile network. It finds that incorrect settings of maximum transmission power limits have blocked power admission and congestion resolution, leading to call setup failures and decreased success rates. It also identifies 261 cells where the primary common pilot channel power exceeds 10% of the allowed transmission power, preventing optimal resource allocation. The report recommends adjusting several power-related parameters, including increasing the primary common pilot channel power for some cells, to gain better coverage and understand true capacity upgrade requirements.

Uploaded by

Cengiz Cokay
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
1K views6 pages

MV Project Ericsson Network: Capacity Management

The document is a report from Huawei Technologies discussing power capacity management issues affecting an Ericsson mobile network. It finds that incorrect settings of maximum transmission power limits have blocked power admission and congestion resolution, leading to call setup failures and decreased success rates. It also identifies 261 cells where the primary common pilot channel power exceeds 10% of the allowed transmission power, preventing optimal resource allocation. The report recommends adjusting several power-related parameters, including increasing the primary common pilot channel power for some cells, to gain better coverage and understand true capacity upgrade requirements.

Uploaded by

Cengiz Cokay
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Security Level:

MV Project Ericsson Network


CAPACITY MANAGEMENT
Huawei NPM Delivery Team 26 June 2012
www.huawei.com

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Power

Parameter Overview Group


Capacity Management, Power Capacity Management, Power Capacity Management, Power Capacity Management, Power Capacity Management, Power Capacity Management, Power

Parameter Name
maxDlPowerCapability maximumTransmissionPower primaryCpichPower primarySchPower maxTxPowerUl pwrAdm

Capacity Management, Power


Capacity Management, Power Capacity Management, Power Capacity Management, Power Capacity Management, Power Capacity Management, Power Capacity Management, Power Capacity Management, Power Capacity Management, Power

pwrOffset
pwrHyst maxPowerOverloadHystTime minPwrRl minPwrMax interPwrMax maxPwrMax maxDlPowerCapability maximumTransmissionPower

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 2

Power: maximumTransmissionPower vs maxDlPowerCapability

If the value of the maximumTransmissionPower parameter is set to a value higher than the value of the maxDlPowerCapability parameter, the actual maximum power is still equal to the value of the maxDlPowerCapability parameter. Since the maximumTransmissionPower Settings are wrong, Power Admission and Congestion Resolving Actions are BLOCKED Since the maximumTransmissionPower Settings are wrong, RAB Establishment Failures are not Classified Due To POWER. Failures are listed as FAILURE AFTER ADMISSION & BLOCKNODE Since Power Admission and Congestion Resolving Actions are BLOCKED , In Case of Power Congestions (HIDDEN) SOHO Success Rate Decreases due to Radio Link Addition Failures
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

Page 3

Power: primaryCpichPower vs maximumTransmissionPower (maxDlPowerCapability ) 1

Since the primaryCpichPower should not exceed 10% of the maximumTransmissionPower (maxDlPowerCapability) There are 261 Utrancells exceeding the primaryCpichPower limit from 1.2 Watt to 0.04 Watt This wrong setting prevents resources to be allocated accordingly. Too little power remained for CS, R99 & HS services. LOW Throughput LOW Data VOLUME Service RABs might have drops due to little power remained for services.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

Page 4

Power: primaryCpichPower vs maximumTransmissionPower (maxDlPowerCapability ) 2

primaryCpichPower was set to 1 Watt by default. For some Utrancells, due to Transmission Network limitations and overshooting issues, has been decreased. For 177 Utrancells, primaryCpichPower might be increased from 1.01 Watt to 0.04 Watt range For Better COVERAGE and To See REAL CAPACITY REQUIREMENTS, It is recommended to utilize the available range especially for Urban Utrancells. This step will provide us to see the real necessities for NodeBs for capacity Upgrade (CE & Power)
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

Page 5

Power: pwradm & pwrOffset & pwrHyst

primaryCpichPower was set to 1 Watt by default. For some Utrancells, due to Transmission Network limitations and overshooting issues, has been decreased. For 177 Utrancells, primaryCpichPower might be increased from 1.01 Watt to 0.04 Watt range For Better COVERAGE and To See REAL CAPACITY REQUIREMENTS, It is recommended to utilize the available range especially for Urban Utrancells. This step will provide us to see the real necessities for NodeBs for capacity Upgrade (CE & Power)
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

Page 6

You might also like