Construction of residential building summer training ppt
Download as PPTX, PDF103 likes46,547 views
Sumit Singh completed a summer training project on the construction of a residential building complex called Assotech Blith Group Housing in Gurgaon, Haryana, India. The project involved constructing 7 towers ranging from G+18 to G+25 floors over an area of 12 acres. Singh learned about the various stages of construction including land acquisition, excavation, formwork, reinforcement placement, casting, and finishing. He was trained in activities like shuttering, bar placing, staircase construction, brickwork, and safety requirements. The training helped improve his confidence and choice to study civil engineering.
Construction of residential building summer training ppt
- 1. RESIDENTIAL BUILDING SUMIT SINGH ROLL NO:1309000107 IEC-CET CIVIL ENGINEERING 4TH YEAR Summer training on from Skyline engineering contracts (India) pvt. Ltd.
- 2. START OF ANY PROJECT FOR BUILDING CONSTRUCTION ▪ Land Acquisition ▪ Land Clearance ▪ Excavation & Compaction ▪ Leveling ▪ Demarcation Plan ▪ Layout , Shuttering And Footing ▪ Onward Construction Of Substructure & Super Structure
- 3. ABOUT THE THE PROJECT Project: Assotech Blith Group Housing Contract : Civil Work For Assotech Blith ,Sector 99,gurgaon (Haryana) Clint : Assotech Limited. Contractor: Skyline Engineering Contracts (India)pvt.Ltd.
- 4. ABOUT THE PROJECT ▪ Seven Towers (A,B,C,D,E&F) ▪ Tower A- G+25 ▪ Tower B&b’ &C- G+22 ▪ Tower D&d’ –G+18 ▪ Tower E,F,G –G+22 ▪ 12 Acres
- 6. FRONT VIEW
- 7. MATERIALS USED Spacers Fly ash bricks Chair
- 9. MATERIALS USED Tie rod sikanja Prop-jack
- 10. MATERIALS USED CHUCKNUT-USE WITH TIE ROD BELLER—SQUARE PIPES
- 11. MACHINARY USED Gemzen Machine Batching Plant Electric Crane Jcb Mechanical Pump ETC.
- 12. ACTIVITIES I HAVE BEEM TRAINED ABOUT Shuttering of stair Reinforcement bar placing Shuttering of treads and risers Casting of stair Curing of stair STAIRCASE Layout Starter Brick wall Masonry Finishing Curing Plastering Curing Painting& distempering BRICKWORK Leveling Formwork Reinforceme nt Concreting Finishing Curing SLAB& BEAMS Layout Starter Reinforceme nt Formwork Concreting Curing COLOUMS & SHEAR-WALL
- 14. COLUMN & SHEAR-WALL (LAYOUT) With The Help Of Layout Plan ,We Do The Layout. For This Face Of Any Column Is Considered as Reference Distance Of Other Column Faces Is Measured To Fix Layout Marking --Thread Is Used
- 15. COLUMN & SHEAR-WALL (STARTER) • L –angles • 5-7.5cms height • High grade mortar
- 16. STARTER MAKING Checking starter height Column starter formwork Checking starter clear cover distances
- 17. Column Kicker Casting In case of column starter casting they maintained the mixing ratio about 1:1.5:3. After kicker casting of column-2
- 18. COLUMN & SHEAR-WALL (Reinforcement) Reinforcement with the help of drawing given
- 19. Reinforcement Placements of Column Reinforcement Placements of Column according to design
- 20. Tie bar spacing checking in column end section Checking lapping length Reinforcement Placements of Column
- 21. SHUTTERING & CASTING Column shuttering Column casting
- 22. COLUMN CURING wrapping column with jute fabric( ) for Curing
- 23. 23 SHUTTERING OF BEAM AND SLAB
- 24. SHUTTERING OF BEAM AND SLAB (CONTINUED) 24 Shuttering work of slab before and after placing steel sheet
- 25. Fig 16: Beam Layout From figure, this green marking beam (Beam-2) width and depth, I checked after beam shuttering.25 SHUTTERING OF BEAM AND SLAB (CONTINUED)
- 26. CENTERING OF BEAM AND SLAB 26 Centering
- 27. I Checked stirrup spacing and lapping distance of beam-2, In figure , it is showed by green marking. 27 Floor beam layout REINFORCEMENT PLACEMENT OF BEAM (CONTINUED)
- 28. REINFORCEMENT PLACEMENT OF BEAM (CONTINUED) For beam-2 constriction: 3-16mmΦ bar in top 3-20mmΦ bar in bottom 2-20mmΦ extra bars in bottom 3-16mmΦ extra bars in top For stirrup 10mmΦ bar 28 Floor beam-2 section
- 29. REINFORCEMENT PLACEMENT OF SLAB 29 Placing Slab Reinforcement in long and short direction Placing Crank, extra top & bottom Reinforcement in slab
- 30. REINFORCEMENT PLACEMENT OF SLAB (CONTINUED) Where I checked slab bar spacing, lapping length and clear distances, which I have showed in figure by red marking line. 30 Slab Layout Plan
- 31. Reinforcement bar spacing given 6ʺ c/c in short direction 5ʺ c/c in long direction 31 Checking the extra top bar length REINFORCEMENT PLACEMENT OF SLAB (CONTINUED)
- 32. CASTING OF BEAM AND SLAB After finishing binding all reinforcement, it was time for casting. Slab, beam and stair were casting at a time. In my site was used cement, sand and bricks chips ratio ware 1:1.5:3. 32
- 33. CASTING OF BEAM AND SLAB (CONTINUED) 33 concrete mixing in mixture machine using crane for pulling up the concrete Beam casting During slab casting, using vibrator & Steel runner.
- 34. CURING OF BEAM AND SLAB 34 Fig 35: Curing of beam by moist jute fabric Fig 36: Making border for pond Fig 37: Curing of slab by ponding of water
- 35. CONSTRUCTION OF STAIR The following works are followed at the time of stair construction: Shuttering of stair Reinforcement bar placing Shuttering of treads and risers Casting of stair Curing of stair 35
- 36. Shuttering of Stair 36 shuttering of Stair
- 37. SHUTTERING OF TREADS AND RISERS After placing all reinforcements, they placed wooden planks for making treads and risers. 37 Checking tread width checking riser height 23-Dec-15
- 38. CASTING & CURING OF STAIR 38 Using vibrator during stair casting Curing of stair by moist jute fabric 23-Dec-15
- 40. BRICK WORK Brick work Masonry Finishing
- 42. SAFETY REQUIREMENTS ▪Need to wear helmet all the time ▪Proper fencing is done ▪First aid kit is available along with safety engineer as well as doctor ▪At height safety belts are also required
- 43. CONCLUSION ▪ Gained basic knowledge in the field of construction. ▪ Learned an importance of proper communication between office and work site. ▪ Learned wise use of available resources. ▪ The training has revamped my confidence. ▪ Learn about safety requirments at site. ▪ I m happy that I choose civil engineering.