Access2007

A Quick Microsoft Access 2007 Tutorial
By Charles W. Neville, © Charles W. Neville, with modification by Leith Chan, Vicky Wong and Steven Lu

Verbatim copying and redistribution of this tutorial are permitted in any medium provided this notice and the
copyright notice are preserved.

This tutorial is intended for students who need a quick introduction to Microsoft Access, but it will be useful
to anyone needing such an introduction. To get the full benefit of this tutorial, you will need a computer with
500 megahertz (MHz) processor or higher and running one of Microsoft Windows XP with Service Pack (SP)
2, Windows Server 2003 with SP1, or later operating system. You will also need at least 1.5 gigabyte (GB)
hard disk space to have Microsoft Access 2007 installed (a portion of this disk space will be freed after
installation if the original download package is removed from the hard drive).

Microsoft Access 2007 provides a library of prebuilt database solutions to get you started quickly

Introduction
Though Microsoft Access is NOT synonymous with database systems; there are more copies of Microsoft
Access in use than any other database system. It therefore behooves computer science students to be at least
superficially familiar with MS Access. This tutorial will guide you through some of the basic point-and-click
stuff, and will even show you how to issue complex SQL (Structured Query Language) queries. You will
open the Northwind Microsoft sample database and query it in various ways. This is a HANDS-ON tutorial; it
gives you step-by-step directions for carrying out simple tasks in Access. As you read, you should have a
copy of the Northwind database open in Microsoft Access 2007, and you should carry out the tasks yourself,
exactly as directed.

First, a few words about what Microsoft Access 2007 is and isn't. People who don't really understand what a
relational database system is, and people who don't actually understand what Microsoft Access 2007 is, will
IMSE1013: Database: A Quick Microsoft Access 2007 Tutorial Page 1

tell you that Microsoft Access is not a fully relational database system. In the database world, not being fully
relational is very bad. Don't worry! The people who tell you that are like those who try to tell you that Linux
is not a 32 bit operating system. Microsoft Access 2007, and its predecessors Access 95, 97, 02 and 03, are
excellent fully relational database systems.

But Microsoft Access 2007 does have a few shortcomings. The principle shortcoming is that it is almost
impossible to enforce reasonable security restrictions with Microsoft Access 2007. So if you want a variety of
users to interact with a database, you should move up to Microsoft's SQL Server, an Oracle database above
the level of Oracle Personal Edition, or the wonderful, and FREE, MySQL. (And let us not forget to mention
the higher levels of FileMaker Pro as good possibilities.) As a certified Microsoft hater, I would naturally
prefer that you move up to Oracle, MySQL, or FileMaker Pro, but I have to be fair. Microsoft's database
products are extremely good, easy to develop for, readily accepted by the outside world, and always good
choices.

An Access Database Open and Ready for Use

This tutorial is divided into chapters. You probably should go through the chapters in sequence, starting with
chapter 1.

Chapters
1. GettingStarted.
2. Adding and Changing Data.
3. Simple Queries.
4. Creating Append Queries
5. Creating QBE Queries.
6. Multi-table QBE Queries.
7. SQL Queries.


Chapter 1. Getting Started
Copying the Northwind Sample Database

The first thing you need to do is make a copy of the Northwind sample database to avoid altering and perhaps
permanently disabling it. You should use this copy instead of the original database while you go through this
tutorial. You can copy the Nothwind sample database from P: IMSE1013Access Northwind.mdb to your U:
drive.

Opening the Northwind Sample Database

Step 1. Open your copy of Northwind by double clicking it. Microsoft Access will start up with a security
warning. Click the “Options...＂ button, check the “Enable this content＂ checkbox and then press OK
button.

Step 2. If all goes well, you will see the opening screen of the Northwind database. Press the OK button to get
the Northwind Traders splash screen out of the way and start working with the actual Northwind database.

The opening screen of the Northwind database


Moving around the Northwind Database

Once the opening splash screen is out of the way, you can see the database window. It consists of a number of
tabs, each of which displays a different aspect of the database. Typically, the Northwind database opens with
the Forms tab selected. In Microsoft applications, Forms are windows used to interact with the application.
Later, after you have finished this tutorial, you might want to satisfy your curiosity about forms. If so, try
selecting the Main Switchboard form, dragging it to the layout (or double clicking it). As is typical in
Microsoft applications, you can close a form by clicking the small x at the top right of the form on its title bar.
(Be careful not to click on the x at the top right of the Microsoft Access title bar, or you will close Access
completely.) If you want to find out how to build your own forms and develop Microsoft Access applications,
try find a book on Microsoft Access.

The forms tab of the Northwind database window

We are mainly interested in the relational database aspects of Microsoft Access, so let us open the Tables tab
and look at some of the tables in the Northwind database.

Step 1. Press the tab marked Tables under the list of Objects at the left of the database window, and then
clicks ONCE on Customers to select the Customers Table.


The tables tab of the Northwind database window with Customers selected

Step 2. Right-click the Customers Table and click Design View on the shortcut menu to view the design (table
definition) of the Customers Table. Notice the small key by CustomerID. As you have probably already
guessed, this means that CustomerID is a key field.


The design of the Customers Table

Move the small vertical scroll bar at the right side of the table description window up and down, if necessary,
so you can read the names and data types of all the fields in the Customers Table.

Caution: Do not change any of the table field definitions, as you do not want to mess up the database.
(Changing table field definitions without knowing what you are doing is one of the few really bad things you
can do to a database. If you change the table field definitions, you will destroy a large part of the data in the
table.)

Step 3. After you have inspected the Customers Table design, click on the small x at the top right of the
Customers Table on its title bar to close the table definition panel and return to the Tables tab. Again, be
careful not to click on the x at the top right of the Microsoft Access title bar, or you will close Access
completely.

Viewing the Data in the Customers Table

Step 1. Be sure the Tables tab is visible in the database window. Open the Customers Table by double-
clicking on it. This will display the data in the table.


The Customers table opened

The Customers Table contains only 91 records, so it is easy to scroll through the opened table and view all the
records. Move the vertical scrollbar up and down so you can inspect the data in some of the records. Move the
horizontal scrollbar back and forth to view all the fields in a given record. Then close the table by clicking on
the small x at the top right of the table on its title bar. Again, be careful not to close Access itself.

Getting Familiar with the Remaining Tables

View the definitions and data for each of the other tables in the database window. Note the large number of
datatypes supported by Access. These include text fields of various sizes, memo fields which are text fields of
unlimited size, number fields, autonumber fields, and even image fields. To actually see the images in the
Picture field in the Categories Table, you have to double click them while the table is open. Those of you
familiar with object technology will be able to see that Microsoft Access 2007 is in part an object oriented
database because access methods (to view images for instance) are bundled with the data. However, Microsoft
Access 2007 is not fully object oriented because (1) it does not support inheritance, and (2) you are not able to
specify the access methods for fields in a table.

What's Next?

The next thing to do is to study how to Add and Change Data


Chapter 2. Adding and Changing Data
Adding Data to the Customers Table

To add records to a table, all you have to do is type them in. Let's add a record for a new customer,
Restaurante Villa, to the Customers Table.

Step 1. Be sure the Customers Table is open in the database window with its data displayed. Click on the
button at the bottom of the Customers Table window to move to the blank record at the end of the Customers
table. The cursor should be positioned in the Customer ID field of the record.

Adding a new record

Step 2. Enter RSTVA in the Customer ID field. Click on the next field, the Company Name field and enter
Restaurante Villa. Then repeat this process to add the following information to the following fields of the
Restaurante Villa record: Pancho Villa to Contact Name, Manager to Contact Title, Avda. Azteca 123 to
Address, Juarez to City, Mexico to Country, (5) 555 4781 to Phone, and (5) 555 4782 to Fax. Click anywhere
outside of the new record to save it. (There will be no feedback that the new record has been saved.)

The completed Restaurante Villa record


Changing Data in the Customers Table

Suppose you have just learned that Pancho Villa is not the manager of Restaurante Villa, rather he is the
owner. To make the change, all you have to do is type it in.

Step 1. Be sure the Restaurante Villa record is visible in the Customers Table window. Click anywhere on
Manager in the Contact Title field to place the cursor there.

Ready to change the Contact Title field of the Restaurante Villa record

Step 2. Use the Delete or Backspace key to erase Manager, and then type Owner in its place to make the
change. Click anywhere outside the Contact Title field to save the change. (There will be no feedback that the
change has been saved.)

Changing the Restaurante Villa record


Deleting Data from the Customers Table

Sometimes you need to completely delete a record. Let's delete the Restaurante Villa record so we can restore
your copy of the Northwind sample database to its original state.

Step 1. Be sure the Restaurante Villa record is visible in the Customers Table window. Click anywhere on the
record to select it. This is VERY IMPORTANT, as not selecting the correct record may result in the WRONG
RECORD being deleted.

Ready to delete the Restuarante Villa record

Step 2. On the Home tab, in the Records group, click the down arrow next to Delete and click Delete Record.

Deleting the Restaurante Villa record


Step 3. Because deleting a record is an extreme change and an irreversible process, you will be asked to
confirm the deletion. Check carefully to be sure you are deleting the correct record.

Confirming the deletion of the Restaurante Villa record

Step 4. Click Yes on the confirmation box to finish deleting the record. Observe that the Restaurante Villa
record is no longer there.

After deleting the Restaurante Villa record

Finding Records in the Customers Table

To find a record in the Customers Table, On the Home tab, in the Find group, click Find. (Alternate

procedure: Press CTRL+F.) This figure shows the command: . Find works just about the way Find

works in your favorite word processor, so I won't present you with any screen shots. Just be careful that the
cursor is located in the column of the table containing the item you are looking for, because the default is to
search only down the current column. You should practice using Find. Try moving to the first record in the
table and then finding TOMSP in the Customer ID column. Then go back to the top or the table and repeat
this for Karin Josephs in the Contact Name column.

The last thing you should do is close the Customer's Table by clicking the small x at the top right of the table
on its title bar. Be careful not to click on the x at the top right of the Microsoft Access title bar, or you will
close Access completely.

What's Next?

The next thing to do is to study Simple Queries


Chapter 3. Simple Queries
What Are Queries?

It is easier to give examples of queries than to give a formal definition. So consider, for example, the Products
table in the Northwind sample database. The Products table lists both current and discontinued products. You
can tell which is which by looking at the Discontinued field of the Products table. Suppose you want a list of
all current products. It is inconvenient to print out all 77 product records in the table and then run down the
list by hand and check off those which are not discontinued. It would be far easier to let the computer do the
work by querying the database and getting a machine prepared list of current products. This is where queries
come in.

Microsoft Access 2007 allows you to create queries and store them for reuse. The stored queries are listed in
the Queries tab of the database window. As it turns out, the designers of the Northwind database have already
created and stored the very query we are interested in to list all current products. The name of the query is
Current Product List. Let us examine and then run it.

Examining the Current Product List Query

Step 1. Be sure the database window is visible. Click on the Queries tab of the database window to make the
list of stored queries visible. Click ONCE on the Current Product List query to select it.

The queries tab of the Northwind database window with Current Product List selected

Step 2. Right-click the Current Product List query and click Design View on the shortcut menu to view the
design (query definition) of the Current Product List query.


The design of the Current Product List query

The design view of the query, which you are looking at now, presents the design of the query in a graphical
format. Move the vertical scroll bars in the Product List box up and down to see what fields are available in
the Product List table. Notice the checks at the bottom of the ProductID and ProductName columns of the
design window. These indicate that the ProductID and ProductName fields will be shown when the query is
run. Notice the lack of a check at the bottom of the Discontinued column. This indicates that the Discontinued
field will not be shown when the query is run. Finally, notice the No in the Criteria row at the very bottom of
the Discontinued column. This indicates that that only those records with No in their Discontinued fields will
be selected when the query is run. In this way, the query will list the product IDs and names of all current
products, but will not list any discontinued products.

Note. You may have wondered, where did the Product List table come from? After all, the correct name of the
table in the database is Products. The answer is that Product List is an alias for the Products table. This
introduces an unnecessary complication into the query, and I suppose the designers of the Northwind database
used this alias just to prove they could.

Another note. The graphical format used by design view has another name, Query By Example or QBE, so
design view could equally well be called QBE View. Of course, Microsoft doesn't call it that, perhaps because
QBE was invented by IBM. QBE was originally a simple text based method for entering queries. The second
generation of QBE became known as graphical QBE because it used a tabular graphical interface similar to
the one used by Microsoft and many other database vendors today. The graphical interface for second
generation QBE was much simpler than Microsoft Access 2007's because second generation QBE, despite its
name of graphical QBE, ran on the text based terminals used by the mainframes of the time.

Running the Current Product List Query

Step 1. Be sure the Current Product List query is open in design view. On the Design tab, in the Results group,
click Run to run the query. (Alternate procedure: double-click the Current Product List query in the
Navigation Pane, or click it and then press ENTER.)

Running the Current Product List query

If all goes well, the Current Product List query will run rather quickly, and the following table of results will
appear,

The result of running the Current Product List query

This table of results is referred to as the Datasheet View of the query.


Move the vertical scroll bars at the right of the table up and down to view all 69 records in the table of results.
This is a lot easier than examining all 77 records in the original table by hand, isn't it?. And with real data,
where there may be thousands or even millions of records, machine run queries are essential.

The SQL View of the Current Product List Query

A query is really an SQL (Structured Query Language) statement or statements. Microsoft Access 2007 makes
it possible for you to examine and edit the actual SQL statements making up a query by switching to SQL
View. Let us switch to SQL View and look at the SQL statements making up the CurrentProductList query.

Step 1. Be sure the Current Product List query is open in design view. On the Design tab, in the Results group,
click View Menu and then click SQL View to look at the query in SQL view. (Alternate procedure: Be sure
the Current Product List query is open in Datasheet view. On the Home tab, in the Views group, click View
Menu and then click SQL View to look at the query in SQL view.)

Changing to the SQL View of the Current Product List query

Or,


If all goes well, you will see the following window appear,

The SQL View of the Current Product List query

This window is actually a simple text editor. You can edit the SQL, enter more SQL, and cut, copy and paste
text. Thus, if you already have some SQL queries prepared in a text file, say one you wrote in Notepad or
UltraEdit 32, you can create an Access 2007 query by clicking Query Design in the Other group of the Create
tab to start a new query, switching to SQL view, deleting the small amount of text in the SQL view window,
and then pasting in the text of your prepared SQL query. The really nice thing is that if you switch back to
design view, your query will appear there nicely in graphical QBE. Of course, you can run your new query as
we just did. You will get to do these things when you study SQL Queries.

Note. The SQL produced by Access 2007 when you create a QBE query in design view is often unnecessarily
complicated. In the example above, there are lots of unnecessary parentheses. This is typical of machine
generated code, and Access 2007 should not be criticized on this account.

The last thing you should do is close the Current Product List query by clicking the small x at the top right of
the SQL View window on its title bar. Be careful not to click on the x at the top right of the Microsoft Access
title bar, or you will close Access completely.

What's Next?

The next thing to do is to study how to create an append query. After that, you will be prepared to study how
to create QBE Queries.


Chapter 4. Creating Append Queries
What are append queries?

An append query adds a set of records (rows) from one or more source tables (or queries) to one or more
destination tables. Typically, the source and destination tables reside in the same database, but they don't have
to. For example, suppose that you acquire some new customers and a database that contains a table of
information about those customers. To avoid entering that new data manually, you can append it to the
appropriate table in your database. You can also use append queries to: (1) Append fields that are based on
criteria. For example, you might want to append only the names and addresses of customers who have
outstanding orders. (2) Append records when some of the fields in one table don't exist in the other table. For
example, suppose that your Customers table has 11 fields, and the fields in the Clients table in another
database match 9 of your 11 fields. You can use an append query to add only the data in the matching fields
and ignore the others.

Note. You cannot use append queries to change the data in individual fields in existing records. You can only
use append queries to add rows of data.

Create a select query?

Step 1. Be sure the database window is visible. On the Create tab, in the Other group, click Query Design.

Starting a new query

Step 2. This displays a new blank query in design view, and also presents you with the Show Table dialog box
so you can choose which tables will be involved in the query. Select the Shippers table and press the Add
button.


The new blank query in design view with the Show Table dialog box

Step 3. Double-click the fields that you want to append. The selected fields appear in the Field row in the
design grid (the lower section of the query designer).

The new blank query in design view with selected fields


Testing the new Query

You should always test a new query by running it.

On the Design tab, in the Results group, click Run to run the query.

Running the new query

If all goes well, the new query will run rather quickly, and the following table of results will appear,

The result of running the new query


Saving the New Query

You need to save your new query for future use. To save the query, click the Microsoft Office Button ,
and then click Save. Save the query as AppendQuery.

Convert the select query to an append query

Step 1. Right-click the AppendQuery and then click Design View on the shortcut menu.

The design of the AppendQuery

Step 2. On the Design tab, in the Query Type group, click Append. The Append dialog box appears.

The AppendQuery with the Append dialog box


Step 3. In the Append dialog box, click Current Database (if it isn't already selected), and then select
Suppliers as the destination table from the Table Name combo box.

Appending records to a table in the same database

Step 4. Microsoft Access 2007 now adds all the fields in the destination table to the Append to row in
the design grid.

Appending records to a table in the same database


Testing the New Query


Step 1. On the Design tab, in the Results group, click Run to run the query.


Step 2. Click Yes on the confirmation box to finish appending the record

The table of results for the AppendQuery

What's Next?

The next thing to do is to study how to create your own QBE Queries. After that, you will be prepared to
study how to create SQL Queries.


Chapter 5. Creating QBE Queries
Creating a New Query

The Current Product List query only displayed the Product ID and Product Name fields of the products which
have not been discontinued. Let us create a new query which will also display the Supplier and Category
fields. The fastest way to do this would be to open the Current Product List query in design view, and then
alter the query. But instead, for practice, we shall create a new query from scratch.

Step 1. Be sure the database window is visible. On the Create tab, in the Other group, click Query Design.

Starting a new query

Step 2. This displays a new blank query in design view, and also presents you with the Show Table dialog
box so you can choose which tables will be involved in the query. Select the Products table and press the Add
button.

The new blank query in design view with the Show Table dialog box

Step 3. As the Products table will be the only table involved in the query for the time being, press the Close
button on the Show Table dialog box. You are now ready to begin the real design work.

Ready to begin the real design work on the new query

Step 4. Be sure the cursor is in the first box of the Field row and press the button in the box to display the
field choices for the Products table. Select ProductID.

Selecting the ProductID field for display

Step 5. Click on the second box of the Field row and press the button again to display the field choices for
the Products table. Select ProductName. Continue in this fashion, with CategoryID in the third box and
Discontinued in the fourth box.

The completed query

Testing the New Query


Step 1. On the Design tab, in the Results group, click Run to run the query.


If all goes well, the new query will run rather quickly, and the following table of results will appear,


The result of running the new query

You should inspect all the records in the table of results. You will immediately notice a problem. There are 77
records instead of the expected 69, and some of the records have their Discontinued fields checked. We forgot
to specify that the value of the Discontinued field should be No. We have to correct this error. This is why
you should always test your queries.

We also forgot to uncheck the checkbox in the Discontinued field column. But this was fortunate because it
helped us diagnose the problems with our query.

Correcting the New Query

Step 1. Right-Click on its title bar and then click on Design View to change back to design view.

Changing back to design view

Step 2. Enter No in the Criteria row of the fourth column.

The partially corrected query

Step 3. Run the partially corrected query to test it.

Testing the partially corrected query by running it

Inspect all the records in the table of results. Observe that there are the expected number of records, 69, and
that none of the records have their Discontinued fields checked. Thus, the query appears to be correct, except
for the display of the Discontinued field.

Step 4. Return to design view. Click on the check box in the Discontinued column to uncheck it. This
completes the corrections to the query.


The fully corrected query

Step 5. Test the fully corrected query one more time by running it.

Testing the fully corrected query by running it

Once more, carefully inspect the table of results. Observe that the query appears to be correct.

Saving the Fully Corrected Query

You need to save your new query for future use. To save the query, click the Microsoft Office Button ,
and then click Save. Save the query as CurrentProducts so you don't overwrite the Current Product List query
which comes as part of your copy of the Northwind sample database. Save works just about the way Save
works in your favorite word processor, so I won't present you with any screen shots. The only difference is
that you save the query inside your copy of the Northwind database, so you don't get the usual Windows File
Save dialog box. Instead, you just get a dialog box where you type in the name under which to save the query.

After you have saved the query, close it by clicking on the small x at the top right of the table of results on its
title bar. (Be careful not to click on the x at the top right of the Microsoft Access title bar, or you will close
Access completely.) Then inspect the Query tab and verify that your new query, CurrentProducts, is listed
there. You can reopen and run the query any time you want by double clicking its name, CurrentProducts.

What's Next?

The next thing to do is to study Multi-table QBE Queries

Chapter 6. Multi-table QBE Queries
Converting the CurrentProducts Query to a Multi-table Query

The CurrentProducts query that you developed and saved in the last chapter only displays the ProductID,
ProductName, and CategoryID fields of the products which have not been discontinued. These fields, and the
Discontinued field, are all part of the Products table, so you only needed that one table in the design of the
query.

But suppose you wanted to change the query so it would also present the name of the supplier of each product,
and the suppliers telephone number. The supplier name is available in the Products table in the SupplierID
field. (Strictly speaking, this isn't true; instead the numerical SupplierID is available. But the designers of the
Northwind sample database made it appear as though the supplier name is available.) However, the supplier's
telephone number is NOT available in the Products table, so we have to use a second table, the Suppliers table,
where it is available.

Let us convert the CurrentProducts query to a multi-table query.

Step 1. Be sure the Queries tab is selected and visible in the database window. Open the CurrentProducts
query in design view by right-clicking it and then clicking on the Design View button.

Opening the CurrentProducts query in Design View

If all goes well, you will see the familiar CurrentProducts query you designed, tested, and saved in the last
chapter.


The Design View of the CurrentProducts query

Step 2. On the Design tab, in the Query Setup group, click Show Table to display the Show Table dialog box.

Displaying the Show Table dialog box

Step 3. When the Show Table dialog box appears, select the Suppliers table and press the Add button.


Adding the Suppliers Table

Step 4. Close the Show Table dialog box by pressing the Close button. If all goes well, you will see both the
Products table and the Suppliers table in the design view window.

The Products and the Suppliers tables both displayed

The line running from Products to Suppliers denotes a many-one relationship between the two tables.
Microsoft Access 2007 incorporates relationships as objects separate from tables, so you can design directly
from Entity-Relationship diagrams. Access also uses relationships to automatically generate joins between
tables. In this chapter of the tutorial, you can safely ignore relationships.

Step 5. Be sure the cursor is in the box in the Table row immediately to the right of the Discontinued column.
Press the button in the box to display the table choices. Select Suppliers.


Selecting the Suppliers table

Step 6. Click on the box of the Field row just above where you selected the Suppliers table, so you can choose
the proper field from the Suppliers table.

Ready to select a field from the Suppliers table

Step 7. Press the button again to display the field choices for the Suppliers table. Select SupplierID.


Selecting the SupplierID field

Step 8. Enter Products.SupplierID in the box in the Criteria row and the Suppliers column. This will guarantee
that Suppliers.SupplierID = Products.SupplierID, so that you will match up the correct product with the
correct supplier.

Entering Products.SupplierID in the criterion box

Note. Strictly speaking, this is not necessary because of the Microsoft Access many-one relationship between
Products and Suppliers. But we have included it for clarity. (Remember, we are ignoring Access relationships
in this chapter.)

Step 9. Click the check box in the Suppliers column to uncheck it.


The query with the Suppliers column checkbox unchecked

Step 10. Repeat steps 5 through 7 in the blank column immediately to the right of the Suppliers column you
just completed. Select the Suppliers table and the CompanyName field. Be sure you leave the check box
checked, and be sure you leave the box in the Criteria row blank.

Step 11. Repeat this in the next blank column immediately to the right of the Suppliers column you just
completed. Select the Suppliers table and the Phone field. This completes the multi-table query.


The completed query

Testing the Multi-table Query

Remember, you should always test a new query by running it.
Step 1. Run the completed query.

The table of results for the multi-table query

Carefully examine the table of results. It appears to be correct, so the completed query appears to be correct.

Saving the Completed Multi-table Query

Save the completed multi-column query for future use as CurrentProductsAndSuppliers. (The period is there
for grammatical reasons and is not part of the name.) Be sure you use Save As rather than Save from the
Microsoft Office Button , and then click, because Save doesn't allow you rename the query.

Displaying the Multi-table Query in SQL View

Let us look at the SQL behind the query by displaying the query in SQL View.


Step 1. On the Home tab, in the Views group, click View Menu and then click SQL View to look at the query
in SQL view.

Displaying the query in SQL view

If all goes well, the SQL View display of the query will look like

The SQL view of the multi-table query

Note. The INNER JOIN appears in the SQL because of the Access many-one relationship between the
Products table and the Suppliers table. The query will work correctly without the INNER JOIN, as we shall
see in the next chapter.

What's Next?

The next thing to do is to study SQL Queries


Chapter 7. SQL Queries
Overview

You need to become familiar with SQL (Structured Query Language) because you will need it if you ever
develop a Microsoft Access application and have to issue queries through code. You also need SQL to query
other database systems, such as Oracle and MySQL. Finally, once you know SQL, it is often easier to write a
query directly in SQL than to design it using Access's QBE interface.

One of the best ways to learn SQL is to build QBE queries and then inspect and alter the query in SQL View.
You are going to do just that with the CurrentProductsAndSuppliers query that you developed and saved in
the last chapter. In detail, you are going to copy the SQL from the CurrentProductsAndSuppliers query, start a
new blank query, paste the SQL into the new query, and save the new query under a new name. Then, you are
going to change the SQL behind the new query.

Copying the SQL from the CurrentProductsAndSuppliers Query

Step 1. Be sure the CurrentProductsAndSuppliers query is visible in SQL view. By now, you know how to
open the query and change to SQL view if it is not.

The SQL view of the CurrentProductsAndSuppliers query

Step 2. Select the SQL text and copy it to the clipboard using the Edit menu.

Copying the SQL text to the clipboard


Step 3. Close the query by clicking on the small x at the top right of the SQL View window on its title bar.
(Be careful not to close Microsoft Access by clicking on the x at the top right of the Microsoft Access title
bar.) If a dialog box comes up asking you if you want to save the changes to the query, answer No.

Starting the New Query

Step 1. Be sure the Queries tab is visible. On the Create tab, in the Other group, click Query Design.

Starting the new query

Step 2. Because you want to start a new blank query, press Close as soon as the Show Table dialog box
appears.

Closing the Show Table dialog box

You should see a new blank query in design view, with no tables.


The new blank query in design view

Step 3. Change to SQL view. By now, you know how.

The new blank query in SQL view

Pasting SQL into the New Query

Step 1. Paste the SQL you have previously copied to the clipboard into the new query's SQL view window by
selecting the text in the window if necessary, clicking Paste on the Paste menu in clipboard group of the
Home tab.


Pasting the SQL into the SQL view window

The result will be that you have the SQL from the CurrentProductsAndSuppliers query pasted into the SQL
view window of your new query

The SQL pasted into the new query SQL view window

Simplifying the New Query SQL

The SQL view window is a complete, though simple, text editor. You are going to simplify the SQL you have
just pasted in by editing it.

Step 1. The parentheses in the SQL are not needed, so delete them.

Step 2. The INNER JOIN statement is not needed either, so remove it too. (Remove everything after the
FROM on the INNER JOIN line.) You do need to say what tables you are using though, so insert
PRODUCTS, SUPPLIERS after the FROM. The simplified SQL in the SQL view window of the new query
should look like


The simplified SQL

Testing the Simplified New Query

Remember, you should always test a new query by running it.
Step 1. Run the completed query.

The table of results for the simplified new query

Note that the table of results is the same as that for the CurrentProductsAndSuppliers query. Thus the new
query appears to be equivalent to the CurrentProductsAndSuppliers query, even though the SQL has been
greatly simplified by replacing the INNER JOIN by a WHERE clause. Most people who write SQL use
WHERE clauses instead of JOINs because WHERE clauses are so much simpler.

Saving the Simplified New Query

Save the simplified new query for future use as SQLQuery. (The period is there for grammatical reasons and
is not part of the name.) Yes, the name SQLQuery is a dumb one, but there are only so many variations on the
more descriptive CurrentProductsAndSuppliers name.

Displaying the SQL Query in Design View

Once a query has been built with SQL, it has a perfectly reasonable design view (QBE view). Let us verify
this by displaying the SQL query in design view.

Step 1. Change to the Design View of the query. By now, you know how.

The SQL query in design view

Note that the design view of the SQL query is nearly the same as the design view of the
CurrentProductsAndSuppliers query. Note the two tables displayed in the tables panel of the design view
window. Only the line denoting the Access many-one relationship is missing. Note how similar the tabular
QBE panel of the SQL query is to the QBE panel of the CurrentProductsAndSuppliers query. Only the order
of some of the columns is different.

You can switch back and forth between designing a query in SQL View and Design View at will. You should
mix and match, and use whatever is simplest at the time.

What's Next?

Congratulations! You have finished A Quick Microsoft Access 2007 Tutorial. If you want to review, you
should go back to the introduction to select the chapters you want to revisit.

If, for any reason, you want to delete any of the queries you have saved, you select the query to be deleted
and use Delete from the Edit menu.

There is much more to learn about Microsoft Access, especially about Forms. In Microsoft applications,
Forms are windows used to interact with the application. Most Microsoft Access databases use Forms to make
it easy for people to interact with the database.


If want to satisfy your curiosity about forms, try selecting the Forms tab and then open the Main Switchboard
form. Then use it to open various other forms in the Northwind sample database. By now, you know enough
to switch back and forth between form view and design view, so you can learn something about how forms
are constructed. Each form has an associated code module, written in a form of Visual Basic called VBA
(Visual Basic for Applications). To view the code, switch to code view.

To close Microsoft Access 2007, Click the Microsoft Office Button , and then click Close Database.
(Alternate procedure: Click on the small x at the very top right of the Microsoft Access window.) But I'm sure
you already know that.


Access2007

More Related Content

What's hot (19)

Similar to Access2007 (20)

Access2007