Extreme Interview Questions

I HAVE NO SPECIAL TALENT I AM ONLY PASSIONATELY CURIOUS
Technical Interview
Questions
Includes Questions asked in TCS, WIPRO and InfoSys
Ehtisham Ali
7/2/2013

Ehtisham Ali Page 1
Contents
S.No Topic P.No.
1. Make a Great First Impression 2
2. C Interview Questions 4
3. C++ Interview Questions 36
4. JAVA Interview Questions 56
5. C # Interview Questions 63
6. DBMS Interview Questions 70
7. OS Interview Questions 80
8. Data Structures Interview Questions 87
9. TCS Interview Questions 90
10. WIPRO Interview Questions 97
11. InfoSys Interview Questions 104

Ehtisham Ali Page 2
Make a Great First Impression
People often say "you never get a second chance to make a first impression", and that's actually quite true
which is why it's so important to start on the right foot.
So, knowing that, how do you make the best first impression possible?
Everyone's different, and while you don't want to be too formulaic, there are definitely a few things you'll
want to keep in mind that should universally help show you in a positive light.
1. Your interview starts the moment you walk into the building; anyone you meet may be
connected with the hiring manager or the hiring team.
2. Be nice to everyone you meet from the receptionist up to the senior-level executives;
everyone's opinion counts.
3. If interviewing with several people at the same time, give everyone equal attention; you never
know who the real decision maker is.
4. Answer interview questions by communicating strong stories of success; prove what makes
you unique rather than just explaining what you did.
5. Try to ask questions throughout the interview; it should be a conversation not an
interrogation.
6. Asking questions during the interview helps you uncover key issues and better prepares you
to answer questions throughout the interview.
7. Be sure to ask what the next steps in the interview process are so you can prepare an
appropriate follow-up strategy.
8. Create a brief and visually interesting presentation about your skills and achievements to
give to the hiring manager during the interview.
9. When asked questions about mistakes you have made, be authentic, explain what you
learned from the experience, and don't get defensive.
10. If asked about your weaknesses, don't spin weaknesses into strengths; it's not credible
and who wants to hire someone they don't trust?
11. Ask big-picture questions about the company and how the department you are interviewing
with fits into the company's long-term goals.
12. People think they should talk in general terms about career successes, but you build trust
with interviewers by talking about specifics.
13. If recruiters ask you to "walk them through your background," focus on your core message
of value, not the five positions you held pre-2001.
14. Interviewees are a risk to hiring managers because they don't know you. Prove success that
can be duplicated in their company to earn trust.
15. A good interviewee is also a good listener. The questions asked provide clues to what the
hiring manager needs and expects.
16. For women, avoid heavy perfume, makeup, and jewelry on interviews. For men, go for a
clean-shaven look, short hair, and polished shoes.
17. For men and women, cover up any tattoos and remove body piercing before interviews
(other than earrings for women).

Ehtisham Ali Page 3
18. Before the interview, turn off your cell phone, take loose change out of your pocket, and don't
show up with your own coffee from Starbucks.
19. Be memorable for what you say during an interview, not for what you wear.
20. On phone interviews, sit in front of a mirror to make you feel like you are in front of someone
-- even if that someone is yourself.
21. During a phone interview, the only tool you have to communicate enthusiasm is your voice;
vary your tone to communicate fit and interest.
22. Phone interviews are like open-book tests; keep any necessary notes handy so you can
refer to them during the call.
23. While waiting for your interview, check out the surroundings. Do people look frazzled or
happy? These are clues into the department culture.
24. Try to relax - don’t sit on the edge of your chair and don't lean too far back: sit up reasonably
straight and still.

Ehtisham Ali Page 4
C Interview Questions
1. What is C language?
The C programming language is a standardized programming language developed in the early 1970s by Ken
Thompson and Dennis Ritchie for use on the UNIX operating system. It has since spread to many other
operating systems, and is one of the most widely used programming languages. C is prized for its efficiency,
and is the most popular programming language for writing system software, though it is also used for writing
applications.
2. What does static variable mean?
There are 3 main uses for the static.
1. If you declare within a function: It retains the value between function calls
2. If it is declared for a function name: By default function is extern..so it will be visible from other files if the
function declaration is as static..it is invisible for the outer files
3. Static for global variables: By default we can use the global variables from outside files If it is static
global..that variable is limited to with in the file.
#include <stdio.h>
int t = 10;
main(){
int x = 0;
void funct1();
funct1();
printf("After first call n");
funct1();
printf("After second call n");
funct1();
printf("After third call n");
}
void funct1()
{
static int y = 0;
int z = 10;
printf("value of y %d z %d",y,z);
y=y+10;
}
value of y 0 z 10 After first call
value of y 10 z 10 After second call
value of y 20 z 10 After third call
3. What are the different storage classes in C?
C has three types of storage: automatic, static and allocated. Variable having block scope and without static
specifier have automatic storage duration. Variables with block scope, and with static specifier have static
scope. Global variables (i.e, file scope) with or without the the static specifier also have static scope. Memory
obtained from calls to malloc(), alloc() or realloc() belongs to allocated storage class.
4. What is hashing?
To hash means to grind up, and that’s essentially what hashing is all about. The heart of a hashing algorithm is
a hash function that takes your nice, neat data and grinds it into some random-looking integer.

Ehtisham Ali Page 5
The idea behind hashing is that some data either has no inherent ordering (such as images) or is expensive to
compare (such as images). If the data has no inherent ordering, you can’t perform comparison searches.
5. Can static variables be declared in a header file?
You can’t declare a static variable without defining it as well (this is because the storage class modifiers static
and extern are mutually exclusive). A static variable can be defined in a header file, but this would cause each
source file that included the header file to have its own private copy of the variable, which is probably not
what was intended.
6. Can a variable be both constant and volatile?
Yes. The const modifier means that this code cannot change the value of the variable, but that does not mean
that the value cannot be changed by means outside this code.
The function itself did not change the value of the timer, so it was declared const. However, the value was
changed by hardware on the computer, so it was declared volatile. If a variable is both const and volatile, the
two modifiers can appear in either order.
7. Can include files be nested?
Yes. Include files can be nested any number of times. As long as you use precautionary measures, you can
avoid including the same file twice. In the past, nesting header files was seen as bad programming practice,
because it complicates the dependency tracking function of the MAKE program and thus slows down
compilation. Many of today’s popular compilers make up for this difficulty by implementing a concept called
precompiled headers, in which all headers and associated dependencies are stored in a precompiled state.
8. What is a null pointer?
There are times when it’s necessary to have a pointer that doesn’t point to anything. The macro NULL, defined
in , has a value that’s guaranteed to be different from any valid pointer. NULL is a literal zero, possibly cast to
void* or char*.
Some people, notably C++ programmers, prefer to use 0 rather than NULL.
The null pointer is used in three ways:
1) To stop indirection in a recursive data structure.
2) As an error value.
3) As a sentinel value.
9. What is the output of printf("%d") ?
When we write printf("%d",x); this means compiler will print the value of x. But as here, there is nothing after
%d so compiler will show in output window garbage value.
10. What is the difference between calloc() and malloc() ?
calloc(...) allocates a block of memory for an array of elements of a certain size. By default the block is
initialized to 0. The total number of memory allocated will be (number_of_elements * size).
malloc(...) takes in only a single argument which is the memory required in bytes. malloc(...) allocated bytes of
memory and not blocks of memory like calloc(...).
malloc(...) allocates memory blocks and returns a void pointer to the allocated space, or NULL if there is
insufficient memory available.

Ehtisham Ali Page 6
calloc(...) allocates an array in memory with elements initialized to 0 and returns a pointer to the allocated
space. calloc(...) calls malloc(...) in order to use the C++ _set_new_mode function to set the new handler
mode.
11. What is the difference between printf() and sprintf() ?
sprintf() writes data to the character array whereas printf(...) writes data to the standard output device.
12. How to reduce a final size of executable?
Size of the final executable can be reduced using dynamic linking for libraries.
13. Can you tell me how to check whether a linked list is circular?
Create two pointers, and set both to the start of the list. Update each as follows:
while (pointer1) {
pointer1 = pointer1->next;
if (pointer2) pointer2=pointer2->next;
if (pointer1 == pointer2) {
print ("circular");
}
}
If a list is circular, at some point pointer2 will wrap around and be either at the item just before pointer1, or
the item before that. Either way, its either 1 or 2 jumps until they meet.
14. Advantages of a macro over a function?
Macro gets to see the Compilation environment, so it can expand __ __TIME__ __FILE__ #defines. It is
expanded by the preprocessor.
For example, you can’t do this without macros
#define PRINT(EXPR) printf( #EXPR “=%dn”, EXPR)
PRINT( 5+6*7 ) // expands into printf(”5+6*7=%d”, 5+6*7 );
You can define your mini language with macros:
#define strequal(A,B) (!strcmp(A,B))
15. What is the difference between strings and character arrays?
A major difference is: string will have static storage duration, whereas as a character array will not, unless it is
explicity specified by using the static keyword.
Actually, a string is a character array with following properties:
* the multibyte character sequence, to which we generally call string, is used to initialize an array of static
storage duration. The size of this array is just sufficient to contain these characters plus the terminating NUL
character.
* it not specified what happens if this array, i.e., string, is modified.
* Two strings of same value[1] may share same memory area.
16. Write down the equivalent pointer expression for referring the same element a[i][j][k][l] ?
a[i] == *(a+i)
a[i][j] == *(*(a+i)+j)

Ehtisham Ali Page 7
a[i][j][k] == *(*(*(a+i)+j)+k)
a[i][j][k][l] == *(*(*(*(a+i)+j)+k)+l)
17. Which bit wise operator is suitable for checking whether a particular bit is on or off?
The bitwise AND operator. Here is an example:
enum {
KBit0 = 1,
KBit1,
…
KBit31,
};
if ( some_int & KBit24 )
printf ( “Bit number 24 is ONn” );
else
printf ( “Bit number 24 is OFFn” );
18. Which bit wise operator is suitable for turning off a particular bit in a number?
The bitwise AND operator, again. In the following code snippet, the bit number 24 is reset to zero.
some_int = some_int & ~KBit24;
19. Which bit wise operator is suitable for putting on a particular bit in a number?
The bitwise OR operator. In the following code snippet, the bit number 24 is turned ON:
some_int = some_int | KBit24;
20. Does there exist any other function which can be used to convert an integer or a float to a string?
Some implementations provide a nonstandard function called itoa(), which converts an integer to string.
#include
char *itoa(int value, char *string, int radix);
DESCRIPTION
The itoa() function constructs a string representation of an integer.
PARAMETERS
value: Is the integer to be converted to string representation.
string: Points to the buffer that is to hold resulting string.
The resulting string may be as long as seventeen bytes.
radix: Is the base of the number; must be in the range 2 - 36.
A portable solution exists. One can use sprintf():
char s[SOME_CONST];
int i = 10;
float f = 10.20;
sprintf ( s, “%d %fn”, i, f );
21. Why does malloc(0) return valid memory address ? What's the use?
malloc(0) does not return a non-NULL under every implementation. An implementation is free to behave in a
manner it finds suitable, if the allocation size requested is zero. The implmentation may choose any of the
following actions:

Ehtisham Ali Page 8
* A null pointer is returned.
* The behavior is same as if a space of non-zero size was requested. In this case, the usage of return value
yields to undefined-behavior.
Notice, however, that if the implementation returns a non-NULL value for a request of a zero-length space, a
pointer to object of ZERO length is returned! Think, how an object of zero size should be represented
For implementations that return non-NULL values, a typical usage is as follows:
void
func ( void )
{
int *p; /* p is a one-dimensional array, whose size will vary during the the lifetime of the program */
size_t c;
p = malloc(0); /* initial allocation */
if (!p)
{
perror (”FAILURE” );
return;
}
/* … */
while (1)
{
c = (size_t) … ; /* Calculate allocation size */
p = realloc ( p, c * sizeof *p );
/* use p, or break from the loop */
/* … */
}
return;
}
Notice that this program is not portable, since an implementation is free to return NULL for a malloc(0)
request, as the C Standard does not support zero-sized objects.
22. Difference between const char* p and char const* p
In const char* p, the character pointed by ‘p’ is constant, so u cant change the value of character pointed by p
but u can make ‘p’ refer to some other location.
In char const* p, the ptr ‘p’ is constant not the character referenced by it, so u cant make ‘p’ to reference to
any other location but u can change the value of the char pointed by ‘p’.
23. What is the result of using Option Explicit?
When writing your C program, you can include files in two ways. The first way is to surround the file you want
to include with the angled brackets < and >. This method of inclusion tells the preprocessor to look for the file
in the predefined default location. This predefined default location is often an INCLUDE environment variable
that denotes the path to your include files.
For instance, given the INCLUDE variable
INCLUDE=C:COMPILERINCLUDE;S:SOURCEHEADERS; using the #include version of file inclusion, the
compiler first checks the C:COMPILERINCLUDE directory for the specified file. If the file is not found there,
the compiler then checks the S:SOURCEHEADERS directory. If the file is still not found, the preprocessor
checks the current directory.
The second way to include files is to surround the file you want to include with double quotation marks. This
method of inclusion tells the preprocessor to look for the file in the current directory first, then look for it in
the predefined locations you have set up. Using the #include file version of file inclusion and applying it to the
preceding example, the preprocessor first checks the current directory for the specified file. If the file is not

Ehtisham Ali Page 9
found in the current directory, the C:COMPILERINCLUDE directory is searched. If the file is still not found, the
preprocessor checks the S:SOURCEHEADERS directory.
The #include method of file inclusion is often used to include standard headers such as stdio.h or stdlib.h.
The #include file include nonstandard header files that you have created for use in your program. This is
because these headers are often modified in the current directory, and you will want the preprocessor to use
your newly modified version of the header rather than the older, unmodified version.
24. What is the benefit of using an enum rather than a #define constant?
The use of an enumeration constant (enum) has many advantages over using the traditional symbolic constant
style of #define. These advantages include a lower maintenance requirement, improved program readability,
and better debugging capability.
1) The first advantage is that enumerated constants are generated automatically by the compiler. Conversely,
symbolic constants must be manually assigned values by the programmer.
2) Another advantage of using the enumeration constant method is that your programs are more readable and
thus can be understood better by others who might have to update your program later.
3) A third advantage to using enumeration constants is that some symbolic debuggers can print the value of an
enumeration constant. Conversely, most symbolic debuggers cannot print the value of a symbolic constant.
This can be an enormous help in debugging your program, because if your program is stopped at a line that
uses an enum, you can simply inspect that constant and instantly know its value. On the other hand, because
most debuggers cannot print #define values, you would most likely have to search for that value by manually
looking it up in a header file.
25. What is the quickest sorting method to use?
The answer depends on what you mean by quickest. For most sorting problems, it just doesn’t matter how
quick the sort is because it is done infrequently or other operations take significantly more time anyway. There
are three sorting methods in this author’s toolbox that are all very fast and that are useful in different
situations. Those methods are quick sort, merge sort, and radix sort.
26. When should the volatile modifier be used?
The volatile modifier is a directive to the compiler’s optimizer that operations involving this variable should not
be optimized in certain ways. There are two special cases in which use of the volatile modifier is desirable. The
first case involves memory-mapped hardware (a device such as a graphics adaptor that appears to the
computer’s hardware as if it were part of the computer’s memory), and the second involves shared memory
(memory used by two or more programs running simultaneously).
27. When should the register modifier be used?
The register modifier hints to the compiler that the variable will be heavily used and should be kept in the
CPU’s registers, if possible, so that it can be accessed faster.
28. How can you determine the size of an allocated portion of memory?
You can’t, really. free() can , but there’s no way for your program to know the trick free() uses. Even if you
disassemble the library and discover the trick, there’s no guarantee the trick won’t change with the next
release of the compiler.

Ehtisham Ali Page 10
29. When does the compiler not implicitly generate the address of the first element of an array?
Whenever an array name appears in an expression such as
· array as an operand of the size of operator
· array as an operand of & operator
· array as a string literal initializer for a character array
Then the compiler does not implicitly generate the address of the address of the first element of an array.
30. Why n++ executes faster than n+1 ?
The expression n++ requires a single machine instruction such as INR to carry out the increment operation
whereas, n+1 requires more instructions to carry out this operation.
31. Why doesn't the following statement work?
char str[ ] = "Hello" ;
strcat ( str, '!' ) ;
Answer: The string function strcat( ) concatenates strings and not a character. The basic difference between a
string and a character is that a string is a collection of characters, represented by an array of characters
whereas a character is a single character. To make the above statement work writes the statement as shown
below:
strcat ( str, "!" ) ;
32. What is the benefit of using #define to declare a constant?
Using the #define method of declaring a constant enables you to declare a constant in one place and use it
throughout your program. This helps make your programs more maintainable, because you need to maintain
only the #define statement and not several instances of individual constants throughout your program.
For instance, if your program used the value of pi (approximately 3.14159) several times, you might want to
declare a constant for pi as follows: #define PI 3.14159
Using the #define method of declaring a constant is probably the most familiar way of declaring constants to
traditional C programmers. Besides being the most common method of declaring constants, it also takes up
the least memory.
Constants defined in this manner are simply placed directly into your source code, with no variable space
allocated in memory. Unfortunately, this is one reason why most debuggers cannot inspect constants created
using the #define method.
33. What is the purpose of main( ) function ?
The function main( ) invokes other functions within it.It is the first function to be called when the program
starts execution.
· It is the starting function
· It returns an int value to the environment that called the program
· Recursive call is allowed for main( ) also.
· It is a user-defined function
· Program execution ends when the closing brace of the function main( ) is reached.
· It has two arguments 1)argument count and 2) argument vector (represents strings passed).
· Any user-defined name can also be used as parameters for main( ) instead of argc and argv

34. How can I search for data in a linked list?
Unfortunately, the only way to search a linked list is with a linear search, because the only way a linked list’s
members can be accessed is sequentially.
Sometimes it is quicker to take the data from a linked list and store it in a different data structure so that
searches can be more efficient.
35. Why should we assign NULL to the elements (pointer) after freeing them?
This is paranoia based on long experience. After a pointer has been freed, you can no longer use the pointed-
to data. The pointer is said to dangle; it doesn’t point at anything useful.
If you NULL out or zero out a pointer immediately after freeing it, your program can no longer get in trouble by
using that pointer. True, you might go indirect on the null pointer instead, but that’s something your debugger
might be able to help you with immediately.
Also, there still might be copies of the pointer that refer to the memory that has been deallocated; that’s the
nature of C. Zeroing out pointers after freeing them won’t solve all problems.
36. What is a null pointer assignment error? What are bus errors, memory faults, and core dumps?
These are all serious errors, symptoms of a wild pointer or subscript. Null pointer assignment is a message you
might get when an MS-DOS program finishes executing. Some such programs can arrange for a small amount
of memory to be available “where the NULL pointer points to (so to speak). If the program tries to write to that
area, it will overwrite the data put there by the compiler.
When the program is done, code generated by the compiler examines that area. If that data has been
changed, the compiler-generated code complains with null pointer assignment. This message carries only
enough information to get you worried. There’s no way to tell, just from a null pointer assignment message,
what part of your program is responsible for the error. Some debuggers, and some compilers, can give you
more help in finding the problem.
Bus error: core dumped and Memory fault: core dumped are messages you might see from a program running
under UNIX. They’re more programmer friendly. Both mean that a pointer or an array subscript was wildly out
of bounds. You can get these messages on a read or on a write. They aren’t restricted to null pointer problems.
The core dumped part of the message is telling you about a file, called core, that has just been written in your
current directory. This is a dump of everything on the stack and in the heap at the time the program was
running. With the help of a debugger, you can use the core dump to find where the bad pointer was
used. That might not tell you why the pointer was bad, but it’s a step in the right direction. If you don’t have
write permission in the current directory, you won’t get a core file, or the core dumped message
37. Predict the output or error(s) for the following programmes:
void main()
{
int const * p=5;
printf("%d",++(*p));
}
Answer: Compiler error: Cannot modify a constant value.
Explanation: p is a pointer to a "constant integer". But we tried to change the value of the "constant integer".
38. main()
{
char s[ ]="man";
int i;
for(i=0;s[ i ];i++)
printf("n%c%c%c%c",s[ i ],*(s+i),*(i+s),i[s]);
}

Answer:
mmm
aaaa
nnnn
Explanation: s[i], *(i+s), *(s+i), i[s] are all different ways of expressing the same idea. Generally array name is
the base address for that array. Here s is the base address. i is the index number/ displacement from the base
address. So, indirecting it with * is same as s[i]. i[s] may be surprising. But in the case of C it is same as s[i].
39. main()
{
float me = 1.1;
double you = 1.1;
if(me==you)
printf("I love U");
else
printf("I hate U");
}
Answer: I hate U
Explanation: For floating point numbers (float, double, long double) the values cannot be predicted exactly.
Depending on the number of bytes, the precession with of the value represented varies. Float takes 4 bytes
and long double takes 10 bytes. So float stores 0.9 with less precision than long double.
Rule of Thumb: Never compare or at-least be cautious when using floating point numbers with relational
operators (== , >, <, <=, >=,!= ) .
40. main()
{
static int var = 5;
printf("%d ",var--);
if(var)
main();
}
Answer: 5 4 3 2 1
Explanation: When static storage class is given, it is initialized once. The change in the value of a static variable
is retained even between the function calls. Main is also treated like any other ordinary function, which can be
called recursively.
41. main()
{
int c[ ]={2.8,3.4,4,6.7,5};
int j,*p=c,*q=c;
for(j=0;j<5;j++) {
printf(" %d ",*c);
++q; }
for(j=0;j<5;j++){
printf(" %d ",*p);
++p; }
}
Answer: 2 2 2 2 2 2 3 4 6 5 Explanation: Initially pointer c is assigned to both p and q. In the first loop, since
only q is incremented and not c , the value 2 will be printed 5 times. In second loop p itself is incremented. So
the values 2 3 4 6 5 will be printed.

42. main()
{
extern int i;
i=20;
printf("%d",i);
}
Answer: Linker Error : Undefined symbol '_i'
Explanation: extern storage class in the following declaration,
extern int i;
specifies to the compiler that the memory for i is allocated in some other program and that address will be
given to the current program at the time of linking. But linker finds that no other variable of name i is available
in any other program with memory space allocated for it. Hence a linker error has occurred .
43. main()
{
int i=-1,j=-1,k=0,l=2,m;
m=i++&&j++&&k++||l++;
printf("%d %d %d %d %d",i,j,k,l,m);
}
Answer: 0 0 1 3 1
Explanation: Logical operations always give a result of 1 or 0. And also the logical AND (&&) operator has
higher priority over the logical OR (||) operator. So the expression ‘i++ && j++ && k++’ is executed first. The
result of this expression is 0 (-1 && -1 && 0 = 0). Now the expression is 0 || 2 which evaluates to 1 (because
OR operator always gives 1 except for ‘0 || 0’ combination- for which it gives 0). So the value of m is 1. The
values of other variables are also incremented by 1.
44. main()
{
char *p;
printf("%d %d ",sizeof(*p),sizeof(p));
}
Answer: 1 2
Explanation: The sizeof() operator gives the number of bytes taken by its operand. P is a character pointer,
which needs one byte for storing its value (a character). Hence sizeof(*p) gives a value of 1. Since it needs two
bytes to store the address of the character pointer sizeof(p) gives 2.
45. main()
{
int i=3;
switch(i)
{
default:printf("zero");
case 1: printf("one");
break;
case 2:printf("two");
break;
case 3: printf("three");
break;
}
}

Answer : Three
Explanation: The default case can be placed anywhere inside the loop. It is executed only when all other cases
doesn't match.
46. main()
{
printf("%x",-1<<4);
}
Answer: fff0
Explanation: -1 is internally represented as all 1's. When left shifted four times the least significant 4 bits are
filled with 0's.The %x format specifier specifies that the integer value be printed as a hexadecimal value.
47. main()
{
char string[]="Hello World";
display(string);
}
void display(char *string)
{
printf("%s",string);
}
Answer: Compiler Error: Type mismatch in redeclaration of function display
Explanation: In third line, when the function display is encountered, the compiler doesn't know anything about
the function display. It assumes the arguments and return types to be integers, (which is the default type).
When it sees the actual function display, the arguments and type contradicts with what it has assumed
previously. Hence a compile time error occurs.
48. main()
{
int c=- -2;
printf("c=%d",c);
}
Answer: c=2;
Explanation: Here unary minus (or negation) operator is used twice. Same maths rules applies, ie. minus *
minus= plus.
Note: However you cannot give like --2. Because -- operator can only be applied to variables as a decrement
operator (eg., i--). 2 is a constant and not a variable.
49. #define int char
main()
{
int i=65;
printf("sizeof(i)=%d",sizeof(i));
}
Answer: sizeof(i)=1
Explanation: Since the #define replaces the string int by the macro char

50. main()
{
int i=10;
i=!i>14;
Printf ("i=%d",i);
}
Answer: i=0
Explanation: In the expression !i>14 , NOT (!) operator has more precedence than ‘ >’ symbol. ! is a unary
logical operator. !i (!10) is 0 (not of true is false). 0>14 is false (zero).
51. #include<stdio.h>
main()
{
char s[]={'a','b','c','n','c','0'};
char *p,*str,*str1;
p=&s[3];
str=p;
str1=s;
printf("%d",++*p + ++*str1-32);
}
Answer: 77
Explanation: p is pointing to character 'n'. str1 is pointing to character 'a' ++*p. "p is pointing to 'n' and that is
incremented by one." the ASCII value of 'n' is 10, which is then incremented to 11. The value of ++*p is 11.
++*str1, str1 is pointing to 'a' that is incremented by 1 and it becomes 'b'. ASCII value of 'b' is 98.
Now performing (11 + 98 – 32), we get 77("M"); So we get the output 77 :: "M" (Ascii is 77).
main()
{
int a[2][2][2] = { {10,2,3,4}, {5,6,7,8} };
int *p,*q;
p=&a[2][2][2];
*q=***a;
printf("%d----%d",*p,*q);
}
Answer: SomeGarbageValue---1
Explanation: p=&a[2][2][2] you declare only two 2D arrays, but you are trying to access the third 2D(which you
are not declared) it will print garbage values.
*q=***a starting address of a is assigned integer pointer. Now q is pointing to starting address of a. If you print
*q, it will print first element of 3D array.
main()
{
struct xx
{
int x=3;
char name[]="hello";
};

struct xx *s;
printf("%d",s->x);
printf("%s",s->name);
}
Answer: Compiler Error
Explanation: You should not initialize variables in declaration
main()
{
struct xx
{
int x;
struct yy
{
char s;
struct xx *p;
};
struct yy *q;
};
}
Explanation: The structure yy is nested within structure xx. Hence, the elements are of yy are to be accessed
through the instance of structure xx, which needs an instance of yy to be known. If the instance is created after
defining the structure the compiler will not know about the instance relative to xx. Hence for nested structure
yy you have to declare member.
55. main()
{
printf("nab");
printf("bsi");
printf("rha");
}
Answer: hai
Explanation:
n - newline
b - backspace
r - linefeed
56. main()
{
int i=5;
printf("%d%d%d%d%d%d",i++,i--,++i,--i,i);
}
Answer: 45545
Explanation: The arguments in a function call are pushed into the stack from left to right. The evaluation is by
popping out from the stack. And the evaluation is from right to left, hence the result.

57. #define square(x) x*x
main()
{
int i;
i = 64/square(4);
printf("%d",i);
}
Answer: 64
Explanation: the macro call square(4) will substituted by 4*4 so the expression becomes i = 64/4*4 . Since /
and * has equal priority the expression will be evaluated as (64/4)*4 i.e. 16*4 = 64
58. main()
{
char *p="hai friends",*p1;
p1=p;
while(*p!='0') ++*p++;
printf("%s %s",p,p1);
}
Answer: ibj!gsjfoet
Explanation: ++*p++ will be parse in the given order
_ *p that is value at the location currently pointed by p will be taken
_ ++*p the retrieved value will be incremented
_ when; is encountered the location will be incremented that is p++ will be executed Hence, in the while loop
initial value pointed by p is ‘h’, which is changed to ‘i’ by executing ++*p and pointer moves to point, ‘a’ which
is similarly changed to ‘b’ and so on. Similarly blank space is converted to ‘!’. Thus, we obtain value in p
becomes “ibj!gsjfoet” and since p reaches ‘0’ and p1 points to p thus p1doesnot print anything.
59. #include <stdio.h>
#define a 10
main()
{
#define a 50
printf("%d",a);
}
Answer: 50
Explanation: The preprocessor directives can be redefined anywhere in the program. So the most recently
assigned value will be taken.
60. #define clrscr() 100
main()
{
clrscr();
printf("%dn",clrscr());
}
Answer: 100
Explanation: Preprocessor executes as a seperate pass before the execution of the compiler. So textual
replacement of clrscr() to 100 occurs. The input program to compiler looks like this :

main()
{
100;
printf("%dn",100);
}
Note: 100; is an executable statement but with no action. So it doesn't give any problem
61. main()
{
41printf("%p",main);
}8
Answer: Some address will be printed.
Explanation: Function names are just addresses (just like array names are addresses). main() is also a function.
So the address of function main will be printed. %p in printf specifies that the argument is an address. They are
printed as hexadecimal numbers.
62. main()
{
clrscr();
}
clrscr();
Answer: No output/error
Explanation: The first clrscr() occurs inside a function. So it becomes a function call. In the second clrscr(); is a
function declaration (because it is not inside any function).
63. enum colors {BLACK,BLUE,GREEN}
main()
{
printf("%d..%d..%d",BLACK,BLUE,GREEN);
return(1);
}
Answer: 0..1..2
Explanation: enum assigns numbers starting from 0, if not explicitly defined.
64. void main()
{
char far *farther,*farthest;
printf("%d..%d",sizeof(farther),sizeof(farthest));
}
Answer: 4..2
Explanation: The second pointer is of char type and not a far pointer
65. main()
{
int i=400,j=300;
printf("%d..%d");
}

Answer: 400..300
Explanation: printf takes the values of the first two assignments of the program. Any number of printf's may be
given. All of them take only the first two values. If more number of assignments given in the program,then
printf will take garbage values.
66. main()
{
char *p;
p="Hello";
printf("%cn",*&*p);
}
Answer: H
Explanation: * is a dereference operator & is a reference operator. They can be applied any number of times
provided it is meaningful. Here p points to the first character in the string "Hello". *p dereferences it and so its
value is H. Again & references it to an address and * dereferences it to the value H.
67. main()
{
int i=1;
while (i<=5)
{
printf("%d",i);
if (i>2)
goto here;
i++;
}
}
fun()
{
here:
printf("PP");
}
Answer: Compiler error: Undefined label 'here' in function main
Explanation: Labels have functions scope, in other words the scope of the labels is limited to functions. The
label 'here' is available in function fun() Hence it is not visible in function main.
68. main()
{
static char names[5][20]={"pascal","ada","cobol","fortran","perl"};
int i;
char *t;
t=names[3];
names[3]=names[4];
names[4]=t;
for (i=0;i<=4;i++)
printf("%s",names[i]);
}
Answer: Compiler error: Lvalue required in function main
Explanation: Array names are pointer constants. So it cannot be modified.

69. void main()
{
int i=5;
printf("%d",i++ + ++i);
}
Answer: Output Cannot be predicted exactly.
Explanation: Side effects are involved in the evaluation of i
70. void main()
{
int i=5;
printf("%d",i+++++i);
}
Explanation: The expression i+++++i is parsed as i ++ ++ + i which is an illegal combination of operators.
main()
{
int i=1,j=2;
switch(i)
{
case 1: printf("GOOD");
break;
case j: printf("BAD");
break;
}
}
Answer: Compiler Error: Constant expression required in function main.
Explanation: The case statement can have only constant expressions (this implies that we cannot use variable
names directly so an error).
Note: Enumerated types can be used in case statements.
72. main()
{
int i;
printf("%d",scanf("%d",&i)); // value 10 is given as input here
}
Answer: 1
Explanation: Scanf returns number of items successfully read and not 1/0. Here 10 is given as input which
should have been scanned successfully. So number of items read is 1.
73. #define f(g,g2) g##g2
main()
{

int var12=100;
printf("%d",f(var,12));
}
Answer: 100
74. main()
{
int i=0;
for(;i++;printf("%d",i)) ;
printf("%d",i);
}
Answer: 1
Explanation: before entering into the for loop the checking condition is "evaluated". Here it evaluates to 0
(false) and comes out of the loop, and i is incremented (note the semicolon after the for loop).
main()
{
char s[]={'a','b','c','n','c','0'};
char *p,*str,*str1;
p=&s[3];
str=p;
str1=s;
printf("%d",++*p + ++*str1-32);
}
Answer: M
Explanation: p is pointing to character 'n'.str1 is pointing to character 'a' ++*p "p is pointing to 'n' and that is
incremented by one." the ASCII value of 'n' is 10. then it is incremented to 11. the value of ++*p is 11. ++*str1
"str1 is pointing to 'a' that is incremented by 1 and it becomes 'b'. ASCII value of 'b' is 98. Both 11 and 98 is
added and result is subtracted from 32. i.e. (11+98-32)=77("M");
main()
{
struct xx
{
int x=3;
char name[]="hello";
};
struct xx *s=malloc(sizeof(struct xx));
printf("%d",s->x);
printf("%s",s->name);
}
Explanation: Initialization should not be done for structure members inside the structure declaration

main()
{
struct xx
{
int x;
struct yy
{
char s;
struct xx *p;
};
struct yy *q;
};
}
Explanation: in the end of nested structure yy a member have to be declared.
78. main()
{
extern int i;
i=20;
printf("%d",sizeof(i));
}
Answer: Linker error: undefined symbol '_i'.
Explanation: extern declaration specifies that the variable i is defined somewhere else. The compiler passes
the external variable to be resolved by the linker. So compiler doesn't find an error. During linking the linker
searches for the definition of i. Since it is not found the linker flags an error.
79. main()
{
printf("%d", out);
}
int out=100;
Answer: Compiler error: undefined symbol out in function main.
Explanation: The rule is that a variable is available for use from the point of declaration. Even though a is a
global variable, it is not available for main. Hence an error.
80. main()
{
extern out;
printf("%d", out);
}
int out=100;
Answer: 100
Explanation: This is the correct way of writing the previous program.

81. main()
{
show();
}
void show()
{
printf("I'm the greatest");
}
Answer: Compier error: Type mismatch in redeclaration of show.
Explanation: When the compiler sees the function show it doesn't know anything about it. So the default
return type (ie, int) is assumed. But when compiler sees the actual definition of show mismatch occurs since it
is declared as void. Hence the error.
The solutions are as follows:
1. declare void show() in main() .
2. define show() before main().
3. declare extern void show() before the use of show().
82. main( )
{
int a[2][3][2] = {{{2,4},{7,8},{3,4}},{{2,2},{2,3},{3,4}}};
printf(“%u %u %u %d n”,a,*a,**a,***a);
printf(“%u %u %u %d n”,a+1,*a+1,**a+1,***a+1);
}
Answer:
100, 100, 100, 2
114, 104, 102, 3
Explanation: The given array is a 3-D one. It can also be viewed as a 1-D array.
100 102 104 106 108
110 112 114 116 118 120 122
thus, for the first printf statement a, *a, **a give address of first element. since the indirection ***a gives the
value. Hence, the first line of the output.
for the second printf a+1 increases in the third dimension thus points to value at 114, *a+1 increments in
second dimension thus points to 104, **a +1 increments the first dimension thus points to 102 and ***a+1
first gets the value at first location and then increments it by 1. Hence, the output.
83. main( )
{
int a[ ] = {10,20,30,40,50},j,*p;
for(j=0; j<5; j++)
{
printf(“%d” ,*a);
a++;
}
p = a;
for(j=0; j<5; j++)
{
printf(“%d ” ,*p);
p++;
2 4 7 8 3 4 2 2 2 3 3 4

}
}
Answer: Compiler error: lvalue required.
Explanation: Error is in line with statement a++. The operand must be an lvalue and may be of any of scalar
type for the any operator, array name only when subscripted is an lvalue. Simply array name is a non
modifiable lvalue.
84. main( )
{
static int a[ ] = {0,1,2,3,4};
int *p[ ] = {a,a+1,a+2,a+3,a+4};
int **ptr = p;
ptr++;
printf(“n %d %d %d”, ptr-p, *ptr-a, **ptr);
*ptr++;
*++ptr;
++*ptr;
}
Answer:
111
222
333
344
Explanation: Let us consider the array and the two pointers with some address
a
0 1 2 3 4
100 102 104 106 108
p
1000 1002 1004 1006 1008
ptr
1000
2000
After execution of the instruction ptr++ value in ptr becomes 1002, if scaling factor for integer is 2 bytes. Now
ptr – p is value in ptr –starting location of array p, (1002 – 1000) / (scaling factor) = 1,
*ptr – a = value at address pointed by ptr – starting value of array a, 1002 has a value 102 so the value is (102 –
100)/(scaling factor) = 1, **ptr is the value stored in the location pointed by the pointer of ptr = value pointed
by value pointed by 1002 = value pointed by 102 = 1. Hence the output of the firs printf is 1, 1, 1.
After execution of *ptr++ increments value of the value in ptr by scaling factor, so it becomes1004. Hence, the
outputs for the second printf are ptr – p = 2, *ptr – a = 2, **ptr = 2.
100 102 104 106 108

After execution of *++ptr increments value of the value in ptr by scaling factor, so it becomes1004. Hence, the
outputs for the third printf are ptr – p = 3, *ptr – a = 3, **ptr = 3.
After execution of ++*ptr value in ptr remains the same, the value pointed by the value is incremented by the
scaling factor. So the value in array p at location 1006 changes from 106 10 108,. Hence, the outputs for the
fourth printf are ptr – p = 1006 – 1000 = 3, *ptr – a = 108 – 100 = 4, **ptr = 4.
85. What is dangling pointer in c?
If any pointer is pointing the memory address of any variable but after some variable has deleted from that
memory location while pointer is still pointing such memory location. Such pointer is known as dangling
pointer and this problem is known as dangling pointer problem.
86. What are merits and demerits of array in c?
Merits:
(a) We can easily access each element of array.
(b) Not necessity to declare too many variables.
(c) Array elements are stored in continuous memory location.
Demerits:
(a) Wastage of memory space. We cannot change size of array at the run time.
(b) It can store only similar type of data
87. Where are the auto variables stored?
Auto variables are stored in main memory and their default value is a garbage value.
88. Why Preincrement operator is faster than Postincrement?
Evaluation of any expression is from left to right. Preincrement is faster because it doesn't need to save the
current value for next instruction whereas Postincrement needs to saves current value to be incremented after
execution of current instruction.
89. Difference between arrays and linked list?
Major differences between arrays and linked lists are: (i) In array consecutive elements are stored in
consecutive memory locations whereas in linked list it not so. (ii) In array address of next element is
consecutive and whereas in linked list it is specified in the address part of each node.(iii) Linked List makes
better use of memory than arrays.(iv) Insertion or deletion of an element in array is difficult than insertion or
deletion in linked list
90. What is the use of typedef?
(i)It increases the portability.
(ii) It simplify the complex declaration and improve readability of the program.
91. What are library Functions?
Library Functions are predefined functions and stored in .lib files.

92. What is a structure?
Structure is a collection of heterogeneous (i.e. related data items which can be of different types) held
together to a single unit. The data items enclosed within a structure are called its members which may be of
data type int, float, char, array etc.
93. What is a pointer?
Pointer is a variable that contains address of another variable in the memory. Pointers are quite useful in
creation of linked data structures (such as linked lst, trees graphs), managing object allocated memory
dynamically, optimize the program to execute faster and use less memory.
94. What are the techniques you use for debugging?
(i)Using compiler’s features
(ii)Read The Fine Module
(iii)printf( ) debugging
(iv)Code grinding
(v)Assertion
95. What are macros? What are its advantages and disadvantages?
Macro is a Pre-processor.Major advantage of using the macro is to increase the speed of the execution of the
program.
Major disadvantage of the macros are:
(i) No type checking is performed in macro. This may cause error.
(ii) A macro call may cause unexpected results.
96. What is difference between Structure and Unions?
(i) In structure every member has its own memory whereas in union its members share the same member
space.
(ii) In structure, it is possible to initialize all the members at the same time which is not possible in case of
union.
(iii) A structure requires more space than union(for the same type of members).
(iv) In union different interpretations of the same memory space are possible which is not so in case of
structures.
97. What are the advantages of using Unions?
(i) Efficient use of memory as it it does not demand memory space for its all members rather it require
memory space for its largest member only.
(ii) Same memory space can be interpreted differently for different members of the union.
98. What is the difference between ordinary variable and pointer in C?
An ordinary variable is like a container it can hold any value and we can change the value of ordinary variable
at a time throughout the program .A pointer is a variable that stores the address of another Variable.
99. What are segment and offset addresses?
When paging technique is performed, the page will breaks into segments and its sequence is said to be
segments and its width can be said as offset. In short,segment is a physical address and offset is logical
address.

100. When should a type cast be used?
There are two situations in which to use a type cast. The first use is to change the type of an operand to an
arithmetic operation so that the operation will be performed properly.
The second case is to cast pointer types to and from void * in order to interface with functions that expect or
return void pointers. For example, the following line type casts the return value of the call to malloc() to be a
pointer to a foo structure.
struct foo *p = (struct foo *) malloc(sizeof(struct foo));
101. What is the difference between %d and %*d in c language?
%d give the original value of the variable and %*d give the address of the variable.
eg:-int a=10,b=20;
printf("%d%d",a,b);
printf("%*d%*d",a,b);
Result is 10 20 1775 1775 .Here 1775 is the starting address of the memory allocation for the integer.a and b
having same address because of contagious memory allocation.
102. How does a C program come to know about command line arguments?
When we execute our C program, operating system loads the program into memory. In case of DOS, it first
loads 256 bytes into memory, called program segment prefix. This contains file tables,environment segment,
and command line information. When we compile the C program the compiler inserts additional code that
parses the command, assigning it to the argv array, making the arguments easily accessible within our C
program.
103. How are pointer variables initialized?
Pointer variable are initialized by one of the following two ways
- Static memory allocation
- Dynamic memory allocation
104. What is modular programming?
If a program is large, it is subdivided into a number of smaller
programs that are called modules or subprograms. If a complex
problem is solved using more modules, this approach is known as
modular programming
105. Where does global, static, local, register variables and C Program instructions get stored?
Global , static, local : In main memory
Register variable: In registers
C program : In main memory.
106. Where are the auto variables stored?
Auto variables are stored in main memory and their default value is a garbage value.
107. What is an lvalue?
An lvalue is an expression to which a value can be assigned. The lvalue
expression is located on the left side of an assignment statement,
whereas an rvalue is located on the right side of an assignment

statement. Each assignment statement must have an lvalue and an
rvalue. The lvalue expression must reference a storable variable in
memory. It cannot be a constant
108. What is an argument? Differentiate between formal arguments and actual arguments?
An argument is an entity used to pass the data from calling function to
the called function. Formal arguments are the arguments available in
the function definition. They are preceded by their own data types.
Actual arguments are available in the function call.
109. When is a switch statement better than multiple if statements?
A switch statement is generally best to use when you have more than two conditional expressions based on a
single variable of numeric type.
110. Differentiate between a linker and linkage?
A linker converts an object code into an executable code by linking together the necessary build in functions.
The form and place of declaration where the variable is declared in a program determine the
linkage of variable.
111. Define Operator, Operand, and Expression in 'C'?
Operators are symbols which take one or more operands or expressions and perform arithmetic or logical
computations.
Operands are variables or expressions which are used in operators to evaluate the expression.
Combination of operands and operators form an expression.
112. What will be the result of the following code?
#define TRUE 0 // some code
while(TRUE)
{
// some code
}
Answer: This will not go into the loop as TRUE is defined as 0.
113. What will be printed as the result of the operation below:
main()
{
int a=0;
if(a==0)
printf(“Cisco Systemsn”);
printf(“Cisco Systemsn”);
}
Answer: Two lines with “Cisco Systems” will be printed.

114. Do you know pragma directives in c?
Pragma is implementation specific directive i.e each pragma directive has different implementation rule and
use. If compiler does not recognize particular pragma it simply ignore that pragma statement without showing
any error or warning message and execute the whole program assuming this pragma statement is not present.
115. Predict the output or error
main()
{
clrscr();
}
clrscr();
Ans:No output/error
Explanation:The first clrscr() occurs inside a function. So it becomes a function call. In the second clrscr(); is a
function declaration (because it is not inside any function).
enum colors {BLACK,BLUE,GREEN}
main()
{
printf("%d..%d..%d",BLACK,BLUE,GREEN);
return(1);
}
Answer: 0..1..2
Explanation: enum assigns numbers starting from 0, if not explicitly defined.
main()
{
int i;
printf("%d",scanf("%d",&i)); // value 10 is given as input here
}
Answer:1
Explanation: Scanf returns number of items successfully read and not 1/0. Here 10 is given as input
which should have been scanned successfully. So number of items read is 1.
118. what will be the position of the file marker?
a: fseek(ptr,0,SEEK_SET);
b: fseek(ptr,0,SEEK_CUR);
Ans: a: The SEEK_SET sets the file position marker to the starting of the file.
b: The SEEK_CUR sets the file position marker to the current position
of the file.
main()
{
main();

}
Ans: Runtime error : Stack overflow.
Explanation: main function calls itself again and again. Each time the function is called its return address is
stored in the call stack. Since there is no condition to terminate the function call, the call stack overflows at
runtime. So it terminates the program and results in an error.
main()
{
int i=5,j=6,z;
printf("%d",i+++j);
}
Answer:11
Explanation:the expression i+++j is treated as (i++ + j)
main()
{
int k=1;
printf("%d==1 is ""%s",k,k==1?"TRUE":"FALSE");
}
Ans: 1==1 is TRUE
Explanation: When two strings are placed together (or separated by white-space) they are concatenated (this
is called as "stringization" operation). So the string is as if it is given as "%d==1 is %s". The conditional
operator( ?: ) evaluates to "TRUE".
122. What is use of void data type?
Void is an empty data type normally used as a return type in C/C++, C#, Java functions/methods to declare that
no value will be return by the function.
The another used of void is to declare the pointer in C/C++ where It is not sure what data type is addressed by
the pointer.
123. four type of scope in c:
Block scope.
Function scope.
File scope.
Program scope.
124. Tell any five properties of auto variables?
auto variables are defined inside a function. A variable declared inside the function without storage class name
is, by default, an auto variable. These functions are declared on the stack. The stack provides temporary
storage.
125. What is automatic type promotion in c?
In c if two operands are of different data type in a binary operation then before performing any operation
compiler will automatically convert the operand of lower data type to higher data type .This phenomenon is
known as automatic type conversion. For example:

int a=10,c;
float b=5.5f;
c=a+b;
Here a int variable while b is float variable. So before performing addition operation value of the variable a
(Lower data type) will automatically convert into float constant (higher data type) then it will perform addition
operation.
126. What are differences between sizeof operator and strlen function?
sizeof is keyword of c which can find size of a string constant including null character but strlen is function
which has been defined string.h and can find number of characters in a string excluding null character.
127. What is command line argument?
Getting the arguments from command prompt in c is known as command line arguments. In c main function
has three arguments.
They are:
Argument counter
Argument vector
Environment vector
128. void main(){
int x=5,y=10,z=15,val;
val=sum(x,(y=0,z=0,y),z);
clrscr();
printf("%d",val);
getch();
}
sum(int x,int y,int z){
return x+y+z;
}
Answer:20
Explanation: In the above program comma after Y=0 &Z=0 are behaving as operator.
129. what is nested structure?
A structure is a collection of one or more variables, possibly of different data types, grouped together under a
single name for convenient handling. Structures can contain other structures as members; in other words,
structures can nest.
130. What is slack byte in structure?
To store any type of data in structure there is minimum fixed byte which must be reserved by memory. This
minimum byte is known as word boundary. Word boundary depends upon machine. TURBO C is based on 8086
microprocessor which has two byte word boundary. So any data type reserves at least two byte space.
131.What is prototype of printf function?
Prototype of printf function is:
int printf( const char *format ,…)

132.What is difference between declaration and definition?
During declaration we just specify the type and no memory is allocated to the variable. But during the
definition an initial value is assigned and memory is allocated to the variable.
133. What is function recursion?
When a function of body calls the same function then it is called as 'recursive function.'
Example:
Recursion()
{
printf("Recursion !");
Recursion();
}
134. What is self referential structure ?
A self-referential structure is one of the data structures which refer to the pointer to (points) to another
structure of the same type.
135. What is far pointer?
The pointer which can point or access whole the residence memory of RAM i.e. which can access all 16
segments is known as far pointer.
136. What is pascal and cdecl keyword in c language?
There are two types of parameters passing conventions in c:
1. pascal: In this style function name should (not necessary ) in the uppercase .First parameter of function call
is passed to the first parameter of function definition and so on.
2. cdecl: In this style function name can be both in the upper case or lower case. First parameter of function
call is passed to the last parameter of function definition. It is default parameter passing convention.
137. What is use of #pragma inline directive in c language?
#pragma inline only tells the compiler that source code of program contain inline assembly language code .In c
we can write assembly language program with help of asm keyword.
138. What is the meaning of multilevel pointers in c?
A pointer is pointer to another pointer which can be pointer to others pointers and so on is known as
multilevel pointers. We can have any level of pointers.
139. What is huge pointer in c?
The pointer which can point or access whole the residence memory of RAM i.e. which can access all the 16
segments is known as huge pointer.
140. Is it possible to rename any function in c?
Yes, we can rename any function using typedef keyword. It is useful when function declaration is too complex
and we have to give any simple name or if we have to create more numbers of function of the same type.

141. Do you know, what is the meaning and use of static keyword in c?
Keyword static is used for declaring static variables in c. This modifier is used with all data types like int, float,
double, array, pointer, structure, function etc.
142. What is difference between .com program and .exe program?
Both .com and .exe program are executable program but .com program execute faster than .exe program. All
drivers are .com program. .com file has higher preference than .exe For example:
143. Difference between TSR and TSO program
TSO means terminate but stay outside. It is that program, which release the main memory after the execution
of the program. Example ms paint, notepad, turbo c compilers etc.
TSR means terminate but stay residence .It is those program, which after the execution of the program does
not release the RAM (main memory).e.g. antivirus.
144. Describe turbo c compiler?
Turbo c is an IDE of c programming language created by Borland. Turbo C 3.0 is based on MS DOS
operation system. It is one of the most popular c compilers. It uses 8086 microprocessor which is 16 bit
microprocessor. It has 20 address buses and 16 data bus. Its word length is two byte.
145. Out of fgets() and gets() which function is safe to use and why?
fgets() is safer than gets(), because we can specify a maximum input length. Neither one is completely safe,
because the compiler can’t prove that programmer won’t overflow the buffer he pass to fgets ().
146. Difference between strdup and strcpy?
Both copy a string. strcpy wants a buffer to copy into. strdup allocates a buffer using malloc().
Unlike strcpy(), strdup() is not specified by ANSI .
147. Differentiate between a for loop and a while loop? What are it uses?
For executing a set of statements fixed number of times we use for loop while when the number of
iterations to be performed is not known in advance we use while loop.
148. What is storage class? What are the different storage classes in C?
Storage class is an attribute that changes the behavior of a variable. It controls the lifetime, scope and linkage.
The storage classes in c are auto, register, and extern, static, typedef.
149. What are the uses of a pointer?
(i)It is used to access array elements
(ii)It is used for dynamic memory allocation.
(iii)It is used in Call by reference
(iv)It is used in data structures like trees, graph, linked list etc.

150.In header files whether functions are declared or defined?
Functions are declared within header file. That is function prototypes exist in a header file,not function bodies.
They are defined in library (lib).
151. Difference between pass by reference and pass by value?
Pass by reference passes a pointer to the value. This allows the callee to modify the variable directly.Pass by
value gives a copy of the value to the callee. This allows the callee to modify the value without modifying the
variable. (In other words, the callee simply cannot modify the variable, since it lacks a reference to it.)
152. What are enumerations?
They are a list of named integer-valued constants. Example:enum color { black , orange=4,yellow, green, blue,
violet };This declaration defines the symbols “black”, “orange”, “yellow”, etc. to have the values “1,” “4,” “5,”
… etc. The difference between an enumeration and a macro is that the enum actually declares a type, and
therefore can be type checked.
153. Are pointers integer?
No, pointers are not integers. A pointer is an address. It is a positive number.
154. What is static memory allocation?
Compiler allocates memory space for a declared variable. By using the address of operator, the reserved
address is obtained and this address is assigned to a pointer variable. This way of assigning pointer value to a
pointer variable at compilation time is known as static memory allocation.
155. What is dynamic memory allocation?
A dynamic memory allocation uses functions such as malloc() or calloc() to get memory dynamically. If these
functions are used to get memory dynamically and the values returned by these function are assigned to
pointer variables, such a way of allocating memory at run time is known as dynamic memory allocation.
156. What modular programming?
If a program is large, it is subdivided into a number of smaller programs that are called modules or
subprograms. If a complex problem is solved using more modules, this approach is known as modular
programming
157. What is a function?
A large program is subdivided into a number of smaller programs or subprograms. Each subprogram specifies
one or more actions to be performed for the larger program. Such sub programs are called functions.
158. Difference between formal argument and actual argument?
Formal arguments are the arguments available in the function definition. They are preceded by their own data
type. Actual arguments are available in the function call. These arguments are given as constants or variables
or expressions to pass the values to the function.

159. what are C tokens?
There are six classes of tokens: identifier, keywords, constants, string literals, operators and other separators.
160. What are C identifiers?
These are names given to various programming element such as variables, function, arrays.It is a combination
of letter, digit and underscore.It should begin with letter. Backspace is not allowed.
161. Difference between syntax vs logical error?
Syntax Error
These involves validation of syntax of language.
compiler prints diagnostic message.
Logical Error
logical error are caused by an incorrect algorithm or by a statement mistyped in such a way that it doesn’t
violet syntax of language.
difficult to find.
162. What are the facilities provided by preprocessor?
file inclusion
substitution facility
conditional compilation
163.What do the functions atoi(), itoa() and gcvt() do?
atoi() is a macro that converts integer to character.
itoa() It converts an integer to string
gcvt() It converts a floating point number to string
164. What is FILE?
FILE is a predefined data type. It is defined in stdio.h file.
165. What is a file?
A file is a region of storage in hard disks or in auxiliary storage devices.It contains bytes of information .It is not
a data type.

C++ Interview Questions
1. What is C++?
Released in 1985, C++ is an object-oriented programming language created by Bjarne Stroustrup. C++
maintains almost all aspects of the C language, while simplifying memory management and adding several
features - including a new datatype known as a class (you will learn more about these later) - to allow object-
oriented programming. C++ maintains the features of C which allowed for low-level memory access but also
gives the programmer new tools to simplify memory management.
C++ used for:
C++ is a powerful general-purpose programming language. It can be used to create small programs or large
applications. It can be used to make CGI scripts or console-only DOS programs. C++ allows you to create
programs to do almost anything you need to do. The creator of C++, Bjarne Stroustrup, has put together a
partial list of applications written in C++.
2. How do you find out if a linked-list has an end? (i.e. the list is not a cycle)
You can find out by using 2 pointers. One of them goes 2 nodes each time. The second one goes at 1 nodes
each time. If there is a cycle, the one that goes 2 nodes each time will eventually meet the one that goes
slower. If that is the case, then you will know the linked-list is a cycle.
3. What is the difference between realloc() and free()?
The free subroutine frees a block of memory previously allocated by the malloc subroutine. Undefined results
occur if the Pointer parameter is not a valid pointer. If the Pointer parameter is a null value, no action will
occur. The realloc subroutine changes the size of the block of memory pointed to by the Pointer parameter to
the number of bytes specified by the Size parameter and returns a new pointer to the block. The pointer
specified by the Pointer parameter must have been created with the malloc, calloc, or realloc subroutines and
not been deallocated with the free or realloc subroutines. Undefined results occur if the Pointer parameter is
not a valid pointer.
4. Base class has some virtual method and derived class has a method with the same name. If we initialize
the base class pointer with derived object, calling of that virtual method will result in which method being
called?
a. Base method
b. Derived method
Ans. B
5. What is function overloading and operator overloading?
Function overloading: C++ enables several functions of the same name to be defined, as long as these
functions have different sets of parameters (at least as far as their types are concerned). This capability is
called function overloading. When an overloaded function is called, the C++ compiler selects the proper
function by examining the number, types and order of the arguments in the call. Function overloading is
commonly used to create several functions of the same name that perform similar tasks but on different data
types.
Operator overloading allows existing C++ operators to be redefined so that they work on objects of user-
defined classes. Overloaded operators are syntactic sugar for equivalent function calls. They form a pleasant
facade that doesn't add anything fundamental to the language (but they can improve understandability and
reduce maintenance costs).

6. What are the advantages of inheritance?
It permits code reusability. Reusability saves time in program development. It encourages the reuse of proven
and debugged high-quality software, thus reducing problem after a system becomes functional.
7.What is the difference between declaration and definition?
The declaration tells the compiler that at some later point we plan to present the definition of this declaration.
E.g.: void stars () //function declaration
The definition contains the actual implementation.
E.g.: void stars () // declarator
{
for(int j=10; j > =0; j--) //function body
cout << *;
cout << endl;
}
8. How do you write a function that can reverse a linked-list?
void reverselist(void)
{
if(head==0)
return;
if(head->next==0)
return;
if(head->next==tail)
{
head->next = 0;
tail->next = head;
}
else
{
node* pre = head;
node* cur = head->next;
node* curnext = cur->next;
head->next = 0;
cur-> next = head;
for(; curnext!=0; )
{
cur->next = pre;
pre = cur;
cur = curnext;
curnext = curnext->next;
}
curnext->next = cur;
}
}
9. What do you mean by inline function?
The idea behind inline functions is to insert the code of a called function at the point where the function is
called. If done carefully, this can improve the application's performance in exchange for increased compile
time and possibly (but not always) an increase in the size of the generated binary executables.
10. Write a program that ask for user input from 5 to 9 then calculate the average
#include "iostream.h"
int main() {

int MAX = 4;
int total = 0;
int average;
int numb;
for (int i=0; i<MAX; i++) {
cout << "Please enter your input between 5 and 9: ";
cin >> numb;
while ( numb<5 || numb>9) {
cout << "Invalid input, please re-enter: ";
cin >> numb;
}
total = total + numb;
}
average = total/MAX;
cout << "The average number is: " << average << "n";
return 0;
}
11. Write a short code using C++ to print out all odd number from 1 to 100 using a for loop
for( unsigned int i = 1; i < = 100; i++ )
if( i & 0x00000001 )
cout << i << ",";
12. What is public, protected, private?
Public, protected and private are three access specifier in C++.
Public data members and member functions are accessible outside the class.
Protected data members and member functions are only available to derived classes.
Private data members and member functions can’t be accessed outside the class. However there is an
exception can be using friend classes.
13. Tell how to check whether a linked list is circular.
Create two pointers, each set to the start of the list. Update each as follows: while (pointer1) {
pointer2 = pointer2->next; if (pointer2) pointer2=pointer2->next;
print ("circularn");
}
}
OK, why does this work?
If a list is circular, at some point pointer2 will wrap around and be either at the item just before pointer1, or
the item before that. Either way, it’s either 1 or 2 jumps until they meet.
14. What is virtual constructors/destructors?
Virtual destructors:If an object (with a non-virtual destructor) is destroyed explicitly by applying the delete
operator to a base-class pointer to the object, the base-class destructor function (matching the pointer type) is
called on the object.
There is a simple solution to this problem declare a virtual base-class destructor. This makes all derived-class
destructors virtual even though they don’t have the same name as the base-class destructor. Now, if the
object in the hierarchy is destroyed explicitly by applying the delete operator to a base-class pointer to a
derived-class object, the destructor for the appropriate class is called. Virtual constructor: Constructors cannot
be virtual. Declaring a constructor as a virtual function is a syntax error.
Virtual destructors: If an object (with a non-virtual destructor) is destroyed explicitly by applying the delete
operator to a base-class pointer to the object, the base-class destructor function (matching the pointer type) is
called on the object.

There is a simple solution to this problem – declare a virtual base-class destructor. This makes all derived-class
destructors virtual even though they don’t have the same name as the base-class destructor. Now, if the
object in the hierarchy is destroyed explicitly by applying the delete operator to a base-class pointer to a
derived-class object, the destructor for the appropriate class is called.
Virtual constructor: Constructors cannot be virtual. Declaring a constructor as a virtual function is a syntax
error.
15. Does c++ support multilevel and multiple inheritance?
Yes.
16. What are the advantages of inheritance?
• It permits code reusability.
• Reusability saves time in program development.
• It encourages the reuse of proven and debugged high-quality software, thus reducing problem after a system
becomes functional.
17. What is the difference between declaration and definition?
The declaration tells the compiler that at some later point we plan to present the definition of this declaration.
E.g.: void stars () //function declaration
The definition contains the actual implementation.
E.g.: void stars () // declarator
{
for(int j=10; j>=0; j--) //function body
cout<<”*”;
cout<<endl;
}
18. What is the difference between an array and a list?
Array is collection of homogeneous elements. List is collection of heterogeneous elements.
For Array memory allocated is static and continuous. For List memory allocated is dynamic and Random.
Array: User need not have to keep in track of next memory allocation.
List: User has to keep in Track of next location where memory is allocated.
Array uses direct access of stored members, list uses sequencial access for members.
/With Array you have direct access to memory position 5
Object x = a[5]; // x takes directly a reference to 5th element of array
//With the list you have to cross all previous nodes in order to get the 5th node:
list mylist;
list::iterator it;
for( it = list.begin() ; it != list.end() ; it++ )
{
if( i==5)
{
x = *it;
break;
}
i++;
}
19. What is a template?
Templates allow to create generic functions that admit any data type as parameters and return value without
having to overload the function with all the possible data types. Until certain point they fulfill the functionality
of a macro. Its prototype is any of the two following ones:
template <class indetifier> function_declaration; template <typename indetifier> function_declaration;

The only difference between both prototypes is the use of keyword class or typename, its use is indistinct
since both expressions have exactly the same meaning and behave exactly the same way.
20. Define a constructor - What it is and how it might be called (2 methods).
Constructor is a member function of the class, with the name of the function being the same as the class
name. It also specifies how the object should be initialized.
Ways of calling constructor:
1) Implicitly: automatically by complier when an object is created.
2) Calling the constructors explicitly is possible, but it makes the code unverifiable.
class Point2D{
int x; int y;
public Point2D() : x(0) , y(0) {} //default (no argument) constructor
};
main(){
Point2D MyPoint; // Implicit Constructor call. In order to allocate memory on stack, the default constructor is
implicitly called.
Point2D * pPoint = new Point2D(); // Explicit Constructor call. In order to allocate memory on HEAP we call the
default constructor.
You have two pairs: new() and delete() and another pair : alloc() and free().
21. Explain differences between eg. new() and malloc()
1.) “new and delete” are preprocessors while “malloc() and free()” are functions. *we dont use brackets will
calling new or delete].
2.) no need of allocate the memory while using “new” but in “malloc()” we have to use “sizeof()”.
3.) “new” will initlize the new memory to 0 but “malloc()” gives random value in the new alloted memory
location [better to use calloc()]
new() allocates continous space for the object instace malloc() allocates distributed space.
new() is castless, meaning that allocates memory for this specific type,
malloc(), calloc() allocate space for void * that is cated to the specific class type pointer.
22. What is the difference between class and structure?
Structure: Initially (in C) a structure was used to bundle different type of data types together to perform a
particular functionality. But C++ extended the structure to contain functions also. The major difference is that
all declarations inside a structure are by default public.
Class: Class is a successor of Structure. By default all the members inside the class are private.
23. What is RTTI?
Runtime type identification (RTTI) lets you find the dynamic type of an object when you have only a pointer or
a reference to the base type. RTTI is the official way in standard C++ to discover the type of an object and to
convert the type of a pointer or reference (that is, dynamic typing).
24.What is encapsulation?
Packaging an object’s variables within its methods is called encapsulation.
25.Explain term “Polymorphism” and give an example using eg. SHAPE object: If I have a base class SHAPE,
how would I define DRAW methods for two objects CIRCLE and SQUARE“Polymorphism”: A phenomenon
which enables an object to react differently to the same function call. in C++ it is attained by using a keyword
virtual
Example
public class SHAPE
{
public virtual void SHAPE::DRAW()=0;

}
Note here the function DRAW() is pure virtual which means the sub classes must implement the DRAW()
method and SHAPE cannot be instatiated
public class CIRCLE::public SHAPE
{
public void CIRCLE::DRAW()
{
// TODO drawing circle
}
}
public class SQUARE::public SHAPE
{
public void SQUARE::DRAW()
{
// TODO drawing square
}
}
now from the user class the calls would be like globally
SHAPE *newShape;
When user action is to draw
public void MENU::OnClickDrawCircle(){
newShape = new CIRCLE();
}
public void MENU::OnClickDrawCircle(){
newShape = new SQUARE();
}
the when user actually draws
public void CANVAS::OnMouseOperations(){
newShape->DRAW();
}
class SHAPE{
public virtual Draw() = 0; //abstract class with a pure virtual method
};
class CIRCLE{
public int r;
public virtual Draw() { this->drawCircle(0,0,r); }
};
class SQURE
public int a;
public virtual Draw() { this->drawRectangular(0,0,a,a); }
};
Each object is driven down from SHAPE implementing Draw() function in its own way.
26. What is an object?
Object is a software bundle of variables and related methods. Objects have state and behavior.
27. How can you tell what shell you are running on UNIX system?
You can do the Echo $RANDOM. It will return a undefined variable if you are from the C-Shell, just a return
prompt if you are from the Bourne shell, and a 5 digit random numbers if you are from the Korn shell. You
could also do a ps -l and look for the shell with the highest PID.

28. What do you mean by inheritance?
Inheritance is the process of creating new classes, called derived classes, from existing classes or base classes.
The derived class inherits all the capabilities of the base class, but can add embellishments and refinements of
its own.
29.Describe PRIVATE, PROTECTED and PUBLIC – the differences and give examples.
class Point2D{
int x; int y;
public int color;
protected bool pinned;
};
Point2D MyPoint;
You cannot directly access private data members when they are declared (implicitly) private:
MyPoint.x = 5; // Compiler will issue a compile ERROR
//Nor yoy can see them:
int x_dim = MyPoint.x; // Compiler will issue a compile ERROR
On the other hand, you can assign and read the public data members:
MyPoint.color = 255; // no problem
int col = MyPoint.color; // no problem
With protected data members you can read them but not write them: MyPoint.pinned = true; // Compiler will
issue a compile ERROR
bool isPinned = MyPoint.pinned; // no problem
30. What is namespace?
Namespaces allow us to group a set of global classes, objects and/or functions under a name. To say it
somehow, they serve to split the global scope in sub-scopes known as namespaces.
The form to use namespaces is:
namespace identifier { namespace-body }
Where identifier is any valid identifier and namespace-body is the set of classes, objects and functions that are
included within the namespace. For example:
namespace general { int a, b; } In this case, a and b are normal variables integrated within the general
namespace. In order to access to these variables from outside the namespace we have to use the scope
operator ::. For example, to access the previous variables we would have to put:
general::a general::b
The functionality of namespaces is specially useful in case that there is a possibility that a global object or
function can have the same name than another one, causing a redefinition error.
31. What is a COPY CONSTRUCTOR and when is it called?
A copy constructor is a method that accepts an object of the same class and copies it’s data members to the
object on the left part of assignment:
class Point2D{
int x; int y;
public int color;
protected bool pinned;
public Point2D( const Point2D & ) ;
};
Point2D::Point2D( const Point2D & p )
{
this->x = p.x;
this->y = p.y;
this->color = p.color;

this->pinned = p.pinned;
}
main(){
Point2D MyPoint;
MyPoint.color = 345;
Point2D AnotherPoint = Point2D( MyPoint ); // now AnotherPoint has color = 345
32. What is Boyce Codd Normal form?
A relation schema R is in BCNF with respect to a set F of functional dependencies if for all functional
dependencies in F+ of the form a-> , where a and b is a subset of R, at least one of the following holds:
* a- > b is a trivial functional dependency (b is a subset of a)
* a is a superkey for schema R
33. What is virtual class and friend class?
Friend classes are used when two or more classes are designed to work together and need access to each
other's implementation in ways that the rest of the world shouldn't be allowed to have. In other words, they
help keep private things private. For instance, it may be desirable for class DatabaseCursor to have more
privilege to the internals of class Database than main() has.
34. What is the word you will use when defining a function in base class to allow this function to be a
polimorphic function?
virtual
35. What do you mean by binding of data and functions?
Encapsulation.
36. What are 2 ways of exporting a function from a DLL?
1. Taking a reference to the function from the DLL instance.
2. Using the DLL ’s Type Library
37. What is the difference between an object and a class?
Classes and objects are separate but related concepts. Every object belongs to a class and every class contains
one or more related objects.
- A Class is static. All of the attributes of a class are fixed before, during, and after the execution of a program.
The attributes of a class don't change.
- The class to which an object belongs is also (usually) static. If a particular object belongs to a certain class at
the time that it is created then it almost certainly will still belong to that class right up until the time that it is
destroyed.
- An Object on the other hand has a limited lifespan. Objects are created and eventually destroyed. Also during
that lifetime, the attributes of the object may undergo significant change.
38. What is a class?
Class is a user-defined data type in C++. It can be created to solve a particular kind of problem. After creation
the user need not know the specifics of the working of a class.

39. What is friend function?
As the name suggests, the function acts as a friend to a class. As a friend of a class, it can access its private and
protected members. A friend function is not a member of the class. But it must be listed in the class definition.
40. Which recursive sorting technique always makes recursive calls to sort subarrays that are about half size
of the original array?
Mergesort always makes recursive calls to sort subarrays that are about half size of the original array, resulting
in O(n log n) time.
41. What is abstraction?
Abstraction is of the process of hiding unwanted details from the user.
42. What are virtual functions?
A virtual function allows derived classes to replace the implementation provided by the base class. The
compiler makes sure the replacement is always called whenever the object in question is actually of the
derived class, even if the object is accessed by a base pointer rather than a derived pointer. This allows
algorithms in the base class to be replaced in the derived class, even if users don't know about the derived
class.
43.What is the difference between an external iterator and an internal iterator? Describe an advantage of
an external iterator.
An internal iterator is implemented with member functions of the class that has items to step through. .An
external iterator is implemented as a separate class that can be "attach" to the object that has items to step
through. .An external iterator has the advantage that many difference iterators can be active simultaneously
on the same object.
44. What is a scope resolution operator?
A scope resolution operator (::), can be used to define the member functions of a class outside the class.
45. What do you mean by pure virtual functions?
A pure virtual member function is a member function that the base class forces derived classes to provide.
Normally these member functions have no implementation. Pure virtual functions are equated to zero.
class Shape { public: virtual void draw() = 0; };
46. What is polymorphism? Explain with an example?
"Poly" means "many" and "morph" means "form". Polymorphism is the ability of an object (or reference) to
assume (be replaced by) or become many different forms of object.
Example: function overloading, function overriding, virtual functions. Another example can be a plus ‘+’ sign,
used for adding two integers or for using it to concatenate two strings.
47.What’s the output of the following program? Why?
#include <stdio.h>
main()
{
typedef union

{
int a;
char b[10];
float c;
}
Union;
Union x,y = {100};
x.a = 50;
strcpy(x.b,"hello");
x.c = 21.50;
printf("Union x : %d %s %f n",x.a,x.b,x.c );
printf("Union y :%d %s%f n",y.a,y.b,y.c);
}
Given inputs X, Y, Z and operations | and & (meaning bitwise OR and AND, respectively)
What is output equal to in
output = (X & Y) | (X & Z) | (Y & Z)
48. Why arrays are usually processed with for loop?
The real power of arrays comes from their facility of using an index variable to traverse the array, accessing
each element with the same expression a[i]. All the is needed to make this work is a iterated statement in
which the variable i serves as a counter, incrementing from 0 to a.length -1. That is exactly what a loop does.
49. What is an HTML tag?
An HTML tag is a syntactical construct in the HTML language that abbreviates specific instructions to be
executed when the HTML script is loaded into a Web browser. It is like a method in Java, a function in C++, a
procedure in Pascal, or a subroutine in FORTRAN.
50.Explain which of the following declarations will compile and what will be constant - a pointer or the value
pointed at: * const char *
* char const *
* char * const
51. What problems might the following macro bring to the application?
#define sq(x) x*x
52. Anything wrong with this code?
T *p = new T[10];
delete p;
Everything is correct, Only the first element of the array will be deleted”, The entire array will be deleted, but
only the first element destructor will be called.
53. Anything wrong with this code?
T *p = 0;
delete p;
Yes, the program will crash in an attempt to delete a null pointer.

54. How do you decide which integer type to use?
It depends on our requirement. When we are required an integer to be stored in 1 byte (means less than or
equal to 255) we use short int, for 2 bytes we use int, for 8 bytes we use long int.
A char is for 1-byte integers, a short is for 2-byte integers, an int is generally a 2-byte or 4-byte integer (though
not necessarily), a long is a 4-byte integer, and a long long is a 8-byte integer.
55. What does extern mean in a function declaration?
Using extern in a function declaration we can make a function such that it can used outside the file in which it
is defined.
An extern variable, function definition, or declaration also makes the described variable or function usable by
the succeeding part of the current source file. This declaration does not replace the definition. The declaration
is used to describe the variable that is externally defined.
If a declaration for an identifier already exists at file scope, any extern declaration of the same identifier found
within a block refers to that same object. If no other declaration for the identifier exists at file scope, the
identifier has external linkage.
56. What can I safely assume about the initial values of variables which are not explicitly initialized?
It depends on complier which may assign any garbage value to a variable if it is not initialized.
57. What is the difference between char a*+ = “string”; and char *p = “string”;?
In the first case 6 bytes are allocated to the variable a which is fixed, where as in the second case if *p is
assigned to some other value the allocate memory can change.
58. What’s the auto keyword good for?
Not much. It declares an object with automatic storage duration. Which means the object will be destroyed at
the end of the objects scope. All variables in functions that are not declared as static and not dynamically
allocated have automatic storage duration by default.
For example
int main()
{
int a; //this is the same as writing “auto int a;”
}
Local variables occur within a scope; they are “local” to a function. They are often called automatic variables
because they automatically come into being when the scope is entered and automatically go away when the
scope closes. The keyword auto makes this explicit, but local variables default to auto auto auto auto so it is
never necessary to declare something as an auto auto auto auto.
59. What is the difference between char a*+ = “string”; and char *p = “string”; ?
a*+ = “string”;
char *p = “string”;
The difference is this:
p is pointing to a constant string, you can never safely say
p*3+=’x';
however you can always say a*3+=’x';
char a*+=”string”; - character array initialization.
char *p=”string” ; - non-const pointer to a const-string.( this is permitted only in the case of char pointer in C++
to preserve backward compatibility with C.)

60. How do I declare an array of N pointers to functions returning pointers to functions returning pointers to
characters?
If you want the code to be even slightly readable, you will use typedefs.
typedef char* (*functiontype_one)(void);
typedef functiontype_one (*functiontype_two)(void);
functiontype_two myarray[N]; //assuming N is a const integral
61. What does extern mean in a function declaration?
It tells the compiler that a variable or a function exists, even if the compiler hasn’t yet seen it in the file
currently being compiled. This variable or function may be defined in another file or further down in the
current file.
62. How do I initialize a pointer to a function?
This is the way to initialize a pointer to a function
void fun(int a)
{
}
void main()
{
void (*fp)(int);
fp=fun;
fp(1);
}
63. How do you link a C++ program to C functions?
By using the extern "C" linkage specification around the C function declarations.
64. Explain the scope resolution operator.
It permits a program to reference an identifier in the global scope that has been hidden by another identifier
with the same name in the local scope.
65. What are the differences between a C++ struct and C++ class?
The default member and base-class access specifier are different.
66. How many ways are there to initialize an int with a constant?
Two. There are two formats for initializers in C++ as shown in the example that follows. The first format uses
the traditional C notation. The second format uses constructor notation.
int foo = 123;
int bar (123);
67. How does throwing and catching exceptions differ from using setjmp and longjmp?
The throw operation calls the destructors for automatic objects instantiated since entry to the try block.

68. What is a default constructor?
Default constructor WITH arguments class B { public: B (int m = 0) : n (m) {} int n; }; int main(int argc, char
*argv[]) { B b; return 0; }
69. What is a conversion constructor?
A constructor that accepts one argument of a different type.
70. What is the difference between a copy constructor and an overloaded assignment operator?
A copy constructor constructs a new object by using the content of the argument object. An overloaded
assignment operator assigns the contents of an existing object to another existing object of the same class.
71. When should you use multiple inheritance?
There are three acceptable answers: "Never," "Rarely," and "When the problem domain cannot be accurately
modeled any other way."
72. Explain the ISA and HASA class relationships. How would you implement each in a class design?
A specialized class "is" a specialization of another class and, therefore, has the ISA relationship with the other
class. An Employee ISA Person. This relationship is best implemented with inheritance. Employee is derived
from Person. A class may have an instance of another class. For example, an employee "has" a salary,
therefore the Employee class has the HASA relationship with the Salary class. This relationship is best
implemented by embedding an object of the Salary class in the Employee class.
73. When is a template a better solution than a base class?
When you are designing a generic class to contain or otherwise manage objects of other types, when the
format and behavior of those other types are unimportant to their containment or management, and
particularly when those other types are unknown (thus, the generosity) to the designer of the container or
manager class.
74. What is a mutable member?
One that can be modified by the class even when the object of the class or the member function doing the
modification is const.
75. What is an explicit constructor?
A conversion constructor declared with the explicit keyword. The compiler does not use an explicit constructor
to implement an implied conversion of types. It’s purpose is reserved explicitly for construction.
76. What is the Standard Template Library (STL)?
A library of container templates approved by the ANSI committee for inclusion in the standard C++
specification. A programmer who then launches into a discussion of the generic programming model, iterators,
allocators, algorithms, and such, has a higher than average understanding of the new technology that STL
brings to C++ programming.

77. Describe run-time type identification.
The ability to determine at run time the type of an object by using the typeid operator or the dynamic cast
operator.
78. What problem does the namespace feature solve?
Multiple providers of libraries might use common global identifiers causing a name collision when an
application tries to link with two or more such libraries. The namespace feature surrounds a library’s external
declarations with a unique namespace that eliminates the potential for those collisions.
This solution assumes that two library vendors don’t use the same namespace identifier, of course.
79. Are there any new intrinsic (built-in) data types?
Yes. The ANSI committee added the bool intrinsic type and its true and false value keywords.
80. Will the following program execute?
void main()
{
void *vptr = (void *) malloc(sizeof(void));
vptr++;
}
It will throw an error, as arithmetic operations cannot be performed on void pointers.
81. For the following C program
#define AREA(x)(3.14*x*x)
main()
{
float r1=6.25,r2=2.5,a;
a=AREA(r1);
printf("n Area of the circle is %f", a);
a=AREA(r2);
printf("n Area of the circle is %f", a);
}
What is the output?
Ans. Area of the circle is 122.656250
Area of the circle is 19.625000
82. void main()
{
int d=5;
printf("%f",d);
}
Ans: Undefined
83. void main()
{
int i;
for(i=1;i<4,i++)
switch(i)
case 1: printf("%d",i);break;
{
case 2:printf("%d",i);break;
case 3:printf("%d",i);break;

}
switch(i) case 4:printf("%d",i);
}
Ans: 1,2,3,4
84.void main()
{
char *s="12345sn";
printf("%d",sizeof(s));
}
Ans: 6
85.void main()
{
unsigned i=1; /* unsigned char k= -1 => k=255; */
signed j=-1; /* char k= -1 => k=65535 */
/* unsigned or signed int k= -1 =>k=65535 */
if(i<j)
printf("less");
else
if(i>j)
printf("greater");
else
if(i==j)
printf("equal");
}
Ans: less</j)
86. void main()
{
float j;
j=1000*1000;
printf("%f",j);
}
1. 1000000
2. Overflow
3. Error
4. None
Ans: 4
87. How do you declare an array of N pointers to functions returning pointers to functions returning
pointers to characters?
Ans: The first part of this question can be answered in at least three ways:
1. char *(*(*a[N])())();
2. Build the declaration up incrementally, using typedefs:
typedef char *pc; /* pointer to char */
typedef pc fpc(); /* function returning pointer to char */
typedef fpc *pfpc; /* pointer to above */
typedef pfpc fpfpc(); /* function returning... */
typedef fpfpc *pfpfpc; /* pointer to... */
pfpfpc a[N]; /* array of... */
3. Use the cdecl program, which turns English into C and vice versa:
cdecl> declare a as array of pointer to function returning pointer to function returning pointer to char
char *(*(*a[])())()

88.What is a modifier?
A modifier, also called a modifying function is a member function that changes the value of at least one data
member. In other words, an operation that modifies the state of an object. Modifiers are also known as
‘mutators’.
89.What is an accessor?
An accessor is a class operation that does not modify the state of an object. The accessor functions need to be
declared as const operations
90.Differentiate between a template class and class template.
Template class: A generic definition or a parameterized class not instantiated until the client provides the
needed information. It’s jargon for plain templates.
Class template: A class template specifies how individual classes can be constructed much like the way class
specifies how individual objects can be constructed. It’s jargon for plain classes
91.When does a name clash occur?
A name clash occurs when a name is defined in more than one place. For example., two different class libraries
could give two different classes the same name. If you try to use many class libraries at the same time, there is
a fair chance that you will be unable to compile or link the program because of name clashes.
92.What is a dangling pointer?
A dangling pointer arises when you use the address of an object after its lifetime is over. This may occur in
situations like returning addresses of the automatic variables from a function or using the address of the
memory block after it is freed.
93.Differentiate between the message and method.
Message:
Objects communicate by sending messages to each other.
A message is sent to invoke a method
Method:
Provides response to a message.
It is an implementation of an operation.
94.What is an adaptor class or Wrapper class?
A class that has no functionality of its own. Its member functions hide the use of a third party software
component or an object with the non-compatible interface or a non-object-oriented implementation.
95.What is a Null object?
It is an object of some class whose purpose is to indicate that a real object of that class does not exist. One
common use for a null object is a return value from a member function that is supposed to return an object
with some specified properties but cannot find such an object.

96.What is class invariant?
A class invariant is a condition that defines all valid states for an object. It is a logical condition to ensure the
correct working of a class. Class invariants must hold when an object is created, and they must be preserved
under all operations of the class. In particular all class invariants are both preconditions and post-conditions
for all operations or member functions of the class.
97.What do you mean by Stack unwinding?
It is a process during exception handling when the destructor is called for all local objects between the place
where the exception was thrown and where it is caught.
98.What are proxy objects?
Objects that stand for other objects are called proxy objects or surrogates.
99.Name some pure object oriented languages.
Smalltalk, Java, Eiffel, Sather.
100.What is an orthogonal base class?
If two base classes have no overlapping methods or data they are said to be independent of, or orthogonal to
each other. Orthogonal in the sense means that two classes operate in different dimensions and do not
interfere with each other in any way. The same derived class may inherit such classes with no difficulty.
101.What is the difference between Mutex and Binary semaphore?
semaphore is used to synchronize processes. where as mutex is used to provide synchronization between
threads running in the same process
102.What is destructor?
Destructor usually deletes any extra resources allocated by the object.
103.What are C++ storage classes?
auto
register
static
extern
auto:the default. Variables are automatically created and initialized when they are defined and are destroyed
at the end of the block containing their definition. They are not visible outside that block
register:a type of auto variable. a suggestion to the compiler to use a CPU register for performance
static:a variable that is known only in the function that contains its definition but is never destroyed and
retains its value between calls to that function. It exists from the time the program begins execution
extern:a static variable whose definition and placement is determined when all object and library modules are
combined (linked) to form the executable code file. It can be visible outside the file where it is defined.
104.What is reference ?
reference is a name that acts as an alias, or alternative name, for a previously defined variable or an
object.prepending variable with "&" symbol makes it as reference.
for example:

int a;
int &b = a;
105.What are the defining traits of an object-oriented language?
The defining traits of an object-oriented langauge are:
encapsulation
inheritance
polymorphism
106.What is Quadratic Probing?
The Performance problem encountered by linear probing is caused by the cluster buildup That occurs as a
result of the probing sequence. Quadratic probing uses a different sequence to avoid primary clustering.
107.What is the chaining?
The Chaining technique basically looks at the hash table as an array of pointers to linked lists. Each slot in the
hash table is either empty or simply consists of a pointer to a linked list. You resolve collisions by adding the
elements that hash to the same slot to the linked list to which that slot points. At the same time, deletions are
easy, You simply delete elements from the linked list.
108.What is the Hash Function?
The hash function is an important part of the hashing technique. This function is used to transform the keys
into table addresses. The hash function we choose should be easy to compute and should be able to transform
the keys into integers in the range 0 to TR-1. Because most of the commonly used hash functions are based on
arithmetic operations, We should convert the keys to numbers on which arithmetic operations can be
performed
109.What is an Visualizations?
The visualization is the basically a way of presentation ,Its just a fancy name for the diagrams, pictures, screen
shots, prototypes, and any other visual representations created to help through and design the graphical user
interface of your product.
110.What is virtual inheritance?
Inheritance is a basically can be private , public, or virtual. With virtual inheritance there is only one copy of
each object even if the object appears more than once in the hierarchy.
111.What is multithreading
Multithreading is defined as :It is the task of creating a new thread of execution within an existing process
rather than starting a new process to begin a function. It is the ability of an operating system to concurrently
run programs that have been divided into subcomponents, or threads.
112.What is the use of using?
Using is bassically a namespace scope. Its directive used to declare the accessibility of identifiers declared
within a namespace scope.

113.What is the use of exception handling?
Exception handling is bassically used to detect exceptions becouse it can be taken a corresponding action
114.What is EOF?
EOF bassically stands for End of File, It is used to check for the end of file when a file is being read.
115.Define the parameterized macros?
Parameterized macros are use for the parameters . It is the one which consist of template with insertion points
for the addition of parameters.
116.What is overflow error?
Overflow error basically a type of arithmatic errors.It's caused by the result of an arithmetic operation being
greater than the actual space provided by the system.
117.What is a nested class? Why can it be useful?
Nested classes basically useful for organizing code and controlling access and dependencies. Nested classes
obey access rules just like other parts of a class do.and that class is a class enclosed within the scope of
another class.
118.What are the disadvantages of C++?
a)It's not pure object oriented programming language.
b)Its a Platform dependent
c)C++ does not give excellant graphics as compare to java.
d)Its Not case sensitive.
e)C++ have Less features as comapred to Java& C#.
f)Its Not applicable in web enviornment.
g)Does not provide very strong type-checking.
h)c++ code is easily prone to errors related to data types, their conversions.
i)Does not provide efficient means for garbage collection.
j)No built in support for threads
119.What is an iterator?
An iterator is a bassically a type of object that represents a stream of data. It is Unlike a sequence, an iterator
can only provide the next item. The for-in statement uses iterators to control the loop, and iterators can also
be used in many other contexts
120.What is the Auto Storage Class?
Auto Storage Class is bassically the default. Variables are automatically created and initialized, When they are
defined and are destroyed at the end of the block containing their definition. They are not visible outside that
block.
121.What is callback function?
Callback function is the type of pointer for a function

122.What is the use of tellg ()?
tellg () provides a information about the current position of input/get pointer.
123.What is the use of tellp ()?
tellp ()use for the poitner postion :Its provides the current position of output/put pointer
124.Define the generic programming?
Generic Programmng is type of method. The method in which generic types are used as arguments in
algorithms for different data types and data structures is called generic programming.
125.What is the use of Microsoft foundation class library?
The Microsoft Foundation Class Library also called as A Microsoft Foundation Classes or MFC. It is basically a
library that wraps portions of the Windows API in C++ classes, and including functionality that enables them to
use a default application framework. Classes are defined for many of the handle-managed Windows objects
and also for predefined windows and common controls. MFC library would help us reduce the code and
development time.

JAVA Interview Questions
1.What is JVM?
The Java interpreter along with the runtime environment required to run the Java application in called as Java
virtual machine(JVM)
2. What is the most important feature of Java?
Java is a platform independent language.
3. What do you mean by platform independence?
Platform independence means that we can write and compile the java code in one platform (eg Windows) and
can execute the class in any other supported platform eg (Linux,Solaris,etc).
4. What is the difference between a JDK and a JVM?
JDK is Java Development Kit which is for development purpose and it includes execution environment also. But
JVM is purely a run time environment and hence you will not be able to compile your source files using a JVM.
5. What is the base class of all classes?
java.lang.Object
6. What are the access modifiers in Java?
There are 3 access modifiers. Public, protected and private, and the default one if no identifier is specified is
called friendly, but programmer cannot specify the friendly identifier explicitly.
7. What is are packages?
A package is a collection of related classes and interfaces providing access protection and namespace
management.
8. What is meant by Inheritance and what are its advantages?
Inheritance is the process of inheriting all the features from a class. The advantages of inheritance are
reusability of code and accessibility of variables and methods of the super class by subclasses.
9. What is the difference between superclass and subclass?
A super class is a class that is inherited whereas sub class is a class that does the inheriting.
10. What is an abstract class?
An abstract class is a class designed with implementation gaps for subclasses to fill in and is deliberately
incomplete.

11. What are the states associated in the thread?
Thread contains ready, running, waiting and dead states.
12. What is synchronization?
Synchronization is the mechanism that ensures that only one thread is accessed the resources at a time.
13. What is deadlock?
When two threads are waiting each other and can’t precede the program is said to be deadlock.
14. What is an applet?
Applet is a dynamic and interactive program that runs inside a web page displayed by a java capable browser
15. What is the lifecycle of an applet?
init() method - Can be called when an applet is first loaded
start() method - Can be called each time an applet is started.
paint() method - Can be called when the applet is minimized or maximized.
stop() method - Can be used when the browser moves off the applet’s page.
destroy() method - Can be called when the browser is finished with the applet.
16. How do you set security in applets?
using setSecurityManager() method
17. What is a layout manager and what are different types of layout managers available in java AWT?
A layout manager is an object that is used to organize components in a container. The different layouts are
available are FlowLayout, BorderLayout, CardLayout, GridLayout and GridBagLayout
18. What is JDBC?
JDBC is a set of Java API for executing SQL statements. This API consists of a set of classes and interfaces to
enable programs to write pure Java Database applications.
19. What are drivers available?
-a) JDBC-ODBC Bridge driver b) Native API Partly-Java driver
c) JDBC-Net Pure Java driver d) Native-Protocol Pure Java driver
20. What is stored procedure?
Stored procedure is a group of SQL statements that forms a logical unit and performs a particular task. Stored
Procedures are used to encapsulate a set of operations or queries to execute on database. Stored procedures
can be compiled and executed with different parameters and results and may have any combination of
input/output parameters.

21. What is the Java API?
The Java API is a large collection of ready-made software components that provide many useful capabilities,
such as graphical user interface (GUI) widgets.
22. Why there are no global variables in Java?
Global variables are globally accessible. Java does not support globally accessible variables due to following
reasons:
1)The global variables breaks the referential transparency
2)Global variables creates collisions in namespace.
23. What are Encapsulation, Inheritance and Polymorphism?
Encapsulation is the mechanism that binds together code and data it manipulates and keeps both safe from
outside interference and misuse. Inheritance is the process by which one object acquires the properties of
another object. Polymorphism is the feature that allows one interface to be used for general class actions.
24. What is the use of bin and lib in JDK?
Bin contains all tools such as javac, appletviewer, awt tool, etc., whereas lib contains API and all packages.
25. What is method overloading and method overriding?
Method overloading: When a method in a class having the same method name with different arguments is
said to be method overloading. Method overriding : When a method in a class having the same method name
with same arguments is said to be method overriding.
26. What is the difference between this() and super()?
this() can be used to invoke a constructor of the same class whereas super() can be used to invoke a super
class constructor.
27. What is Domain Naming Service(DNS)?
It is very difficult to remember a set of numbers(IP address) to connect to the Internet. The Domain Naming
Service(DNS) is used to overcome this problem. It maps one particular IP address to a string of characters. For
example, www. mascom. com implies com is the domain name reserved for US commercial sites, moscom is
the name of the company and www is the name of the specific computer, which is mascom’s server.
28. What is URL?
URL stands for Uniform Resource Locator and it points to resource files on the Internet. URL has four
components: http://www. address. com:80/index.html, where http - protocol name, address - IP address or
host name, 80 - port number and index.html - file path.
29. What is RMI and steps involved in developing an RMI object?
Remote Method Invocation (RMI) allows java object that executes on one machine and to invoke the method
of a Java object to execute on another machine. The steps involved in developing an RMI object are: a) Define
the interfaces b) Implementing these interfaces c) Compile the interfaces and their implementations with the
java compiler d) Compile the server implementation with RMI compiler e) Run the RMI registry f) Run the
application.

30. What is RMI architecture?
RMI architecture consists of four layers and each layer performs specific functions: a) Application layer -
contains the actual object definition. b) Proxy layer - consists of stub and skeleton. c) Remote Reference layer -
gets the stream of bytes from the transport layer and sends it to the proxy layer. d) Transportation layer -
responsible for handling the actual machine-to-machine communication.
31. What is a Java Bean?
A Java Bean is a software component that has been designed to be reusable in a variety of different
environments.
32. What are checked exceptions?
Checked exception are those which the Java compiler forces you to catch. e.g. IOException are checked
Exceptions.
33. What are runtime exceptions?
Runtime exceptions are those exceptions that are thrown at runtime because of either wrong input data or
because of wrong business logic etc. These are not checked by the compiler at compile time.
34. What is the difference between error and an exception?
An error is an irrecoverable condition occurring at runtime. Such as OutOfMemory error. These JVM errors and
you can not repair them at runtime. While exceptions are conditions that occur because of bad input etc. e.g.
FileNotFoundException will be thrown if the specified file does not exist. Or a NullPointerException will take
place if you try using a null reference. In most of the cases it is possible to recover from an exception (probably
by giving user a feedback for entering proper values etc.).
35. What is the purpose of finalization?
The purpose of finalization is to give an unreachable object the opportunity to perform any cleanup processing
before the object is garbage collected. For example, closing a opened file, closing a opened database
Connection.
36. What is the difference between yielding and sleeping?
When a task invokes its yield() method, it returns to the ready state. When a task invokes its sleep() method, it
returns to the waiting state.
37. What is the difference between preemptive scheduling and time slicing?
Under preemptive scheduling, the highest priority task executes until it enters the waiting or dead states or a
higher priority task comes into existence. Under time slicing, a task executes for a predefined slice of time and
then reenters the pool of ready tasks. The scheduler then determines which task should execute next, based
on priority and other factors.
38. What is mutable object and immutable object?
If a object value is changeable then we can call it as Mutable object. (Ex., StringBuffer, …) If you are not
allowed to change the value of an object, it is immutable object. (Ex., String, Integer, Float, …)

39. What is the purpose of Void class?
The Void class is an uninstantiable placeholder class to hold a reference to the Class object representing the
primitive Java type void.
40. What is JIT and its use?
Really, just a very fast compiler… In this incarnation, pretty much a one-pass compiler — no offline
computations. So you can’t look at the whole method, rank the expressions according to which ones are re-
used the most, and then generate code. In theory terms, it’s an on-line problem.
41. What is nested class?
If all the methods of a inner class is static then it is a nested class.
42. What is HashMap and Map?
Map is Interface and Hashmap is class that implements that.
43. What are different types of access modifiers?
public: Any thing declared as public can be accessed from anywhere. private: Any thing declared as private
can’t be seen outside of its class. protected: Any thing declared as protected can be accessed by classes in the
same package and subclasses in the other packages. default modifier : Can be accessed only to classes in the
same package.
44. What is the difference between Reader/Writer and InputStream/Output Stream?
The Reader/Writer class is character-oriented and the InputStream/OutputStream class is byte-oriented.
45. What is servlet?
Servlets are modules that extend request/response-oriented servers, such as java-enabled web servers. For
example, a servlet might be responsible for taking data in an HTML order-entry form and applying the business
logic used to update a company’s order database.
46. What is Constructor?
A constructor is a special method whose task is to initialize the object of its class.
It is special because its name is the same as the class name.
They do not have return types, not even void and therefore they cannot return values.
They cannot be inherited, though a derived class can call the base class constructor.
Constructor is invoked whenever an object of its associated class is created.
47. What is an Iterator ?
The Iterator interface is used to step through the elements of a Collection.
Iterators let you process each element of a Collection.
Iterators are a generic way to go through all the elements of a Collection no matter how it is organized.
Iterator is an Interface implemented a different way for every Collection.
48. What is the List interface?
The List interface provides support for ordered collections of objects.
Lists may contain duplicate elements.

49. What is memory leak?
A memory leak is where an unreferenced object that will never be used again still hangs around in memory
and doesnt get garbage collected.
50. What is the difference between the prefix and postfix forms of the ++ operator?
The prefix form performs the increment operation and returns the value of the increment operation. The
postfix form returns the current value all of the expression and then performs the increment operation on that
value.
51. What is the difference between a constructor and a method?
A constructor is a member function of a class that is used to create objects of that class. It has the same name
as the class itself, has no return type, and is invoked using the new operator.
A method is an ordinary member function of a class. It has its own name, a return type (which may be void),
and is invoked using the dot operator.
52. What will happen to the Exception object after exception handling?
Exception object will be garbage collected.
53. Difference between static and dynamic class loading.
Static class loading: The process of loading a class using new operator is called static class loading. Dynamic
class loading: The process of loading a class at runtime is called dynamic class loading.
Dynamic class loading can be done by using Class.forName(….).newInstance().
54. Explain the Common use of EJB
The EJBs can be used to incorporate business logic in a web-centric application.
The EJBs can be used to integrate business processes in Business-to-business (B2B) e-commerce applications.In
Enterprise Application Integration applications, EJBs can be used to house processing and mapping between
different applications.
55. What is JSP?
JSP is a technology that returns dynamic content to the Web client using HTML, XML and JAVA elements. JSP
page looks like a HTML page but is a servlet. It contains Presentation logic and business logic of a web
application.
56. What is the purpose of apache tomcat?
Apache server is a standalone server that is used to test servlets and create JSP pages. It is free and open
source that is integrated in the Apache web server. It is fast, reliable server to configure the applications but it
is hard to install. It is a servlet container that includes tools to configure and manage the server to run the
applications. It can also be configured by editing XML configuration files.
57. Where pragma is used?
Pragma is used inside the servlets in the header with a certain value. The value is of no-cache that tells that a
servlets is acting as a proxy and it has to forward request. Pragma directives allow the compiler to use machine

and operating system features while keeping the overall functionality with the Java language. These are
different for different compilers.
58. Briefly explain daemon thread.
Daemon thread is a low priority thread which runs in the background performs garbage collection operation
for the java runtime system.
59. What is a native method?
A native method is a method that is implemented in a language other than Java.
60. Explain different way of using thread?
A Java thread could be implemented by using Runnable interface or by extending the Thread class. The
Runnable is more advantageous, when you are going for multiple inheritance.
61. What are the two major components of JDBC?
One implementation interface for database manufacturers, the other implementation interface for application
and applet writers.
62. What kind of thread is the Garbage collector thread?
It is a daemon thread.
63. What are the different ways to handle exceptions?
There are two ways to handle exceptions,
1. By wrapping the desired code in a try block followed by a catch block to catch the exceptions. and
2. List the desired exceptions in the throws clause of the method and let the caller of the method handle those
exceptions.
64. How many objects are created in the following piece of code?
MyClass c1, c2, c3;
c1 = new MyClass ();
c3 = new MyClass ();
Answer: Only 2 objects are created, c1 and c3. The reference c2 is only declared and not initialized.
65.What is UNICODE?
Unicode is used for internal representation of characters and strings and it uses 16 bits to represent each
other.

C # Interview Questions
1. What’s the advantage of using System.Text.StringBuilder over System.String?
StringBuilder is more efficient in the cases, where a lot of manipulation is done to the text. Strings are
immutable, so each time it’s being operated on, a new instance is created.
2. Can you store multiple data types in System.Array?
No.
3. What’s the difference between the System.Array.CopyTo() and System.Array.Clone()?
The first one performs a deep copy of the array, the second one is shallow.
4. How can you sort the elements of the array in descending order?
By calling Sort() and then Reverse() methods.
5. What’s the .NET datatype that allows the retrieval of data by a unique key?
HashTable.
6. What’s class SortedList underneath?
A sorted HashTable.
7. Will finally block get executed if the exception had not occurred?
Yes.
8. What’s the C# equivalent of C++ catch (…), which was a catch-all statement for any possible exception?
A catch block that catches the exception of type System.Exception. You can also omit the parameter data type
in this case and just write catch {}.
9. Can multiple catch blocks be executed?
No, once the proper catch code fires off, the control is transferred to the finally block (if there are any), and
then whatever follows the finally block.
10. Why is it a bad idea to throw your own exceptions?
Well, if at that point you know that an error has occurred, then why not write the proper code to handle that
error instead of passing a new Exception object to the catch block? Throwing your own exceptions signifies
some design flaws in the project.
11. What’s a delegate?
A delegate object encapsulates a reference to a method. In C++ they were referred to as function pointers.
12. What’s a multicast delegate?
It’s a delegate that points to and eventually fires off several methods.

13. How’s the DLL Hell problem solved in .NET?
Assembly versioning allows the application to specify not only the library it needs to run (which was available
under Win32), but also the version of the assembly.
14. What are the ways to deploy an assembly?
An MSI installer, a CAB archive, and XCOPY command.
15. What’s a satellite assembly?
When you write a multilingual or multi-cultural application in .NET, and want to distribute the core application
separately from the localized modules, the localized assemblies that modify the core application are called
satellite assemblies.
16. What namespaces are necessary to create a localized application?
System.Globalization, System.Resources.
17. What’s the difference between // comments, /* */ comments and /// comments?
Single-line, multi-line and XML documentation comments.
18. How do you generate documentation from the C# file commented properly with a command-line
compiler?
Compile it with a /doc switch.
19. What’s the difference between <c> and <code> XML documentation tag?
Single line code example and multiple-line code example.
20. Is XML case-sensitive?
Yes, so <Student> and <student> are different elements.
21. What debugging tools come with the .NET SDK?
CorDBG – command-line debugger, and DbgCLR – graphic debugger. Visual Studio .NET uses the DbgCLR. To
use CorDbg, you must compile the original C# file using the /debug switch.
22. What does the This window show in the debugger?
It points to the object that’s pointed to by this reference. Object’s instance data is shown.
23. What are three test cases you should go through in unit testing?
Positive test cases (correct data, correct output), negative test cases (broken or missing data, proper handling),
exception test cases (exceptions are thrown and caught properly).
24. What does assert() do?
In debug compilation, assert takes in a Boolean condition as a parameter, and shows the error dialog if the
condition is false. The program proceeds without any interruption if the condition is true.

25. Why are there five tracing levels in System.Diagnostics.TraceSwitcher?
The tracing dumps can be quite verbose and for some applications that are constantly running you run the risk
of overloading the machine and the hard drive there. Five levels range from None to Verbose, allowing to fine-
tune the tracing activities.
26. Where is the output of TextWriterTraceListener redirected?
To the Console or a text file depending on the parameter passed to the constructor.
27. How do you debug an ASP.NET Web application?
Attach the aspnet_wp.exe process to the DbgClr debugger.
28. What’s the difference between the Debug class and Trace class?
Documentation looks the same. Use Debug class for debug builds, use Trace class for both debug and release
builds.
29. Can you change the value of a variable while debugging a C# application?
Yes, if you are debugging via Visual Studio.NET, just go to immediate window.
30. Explain the three services model (three-tier application).
Presentation (UI), business (logic and underlying code) and data (from storage or other sources).
31. What are advantages and disadvantages of Microsoft-provided data provider classes in ADO.NET?
SQLServer.NET data provider is high-speed and robust, but requires SQL Server license purchased from
Microsoft. OLE-DB.NET is universal for accessing other sources, like Oracle, DB2, Microsoft Access and
Informix, but it’s a .NET layer on top of OLE layer, so not the fastest thing in the world. ODBC.NET is a
deprecated layer provided for backward compatibility to ODBC engines.
32. What’s the role of the DataReader class in ADO.NET connections?
It returns a read-only dataset from the data source when the command is executed.
33. What is the wildcard character in SQL?
Let’s say you want to query database with LIKE for all employees whose name starts with La. The wildcard
character is %, the proper query with LIKE would involve ‘La%’.
34. Explain ACID rule of thumb for transactions.
Transaction must be Atomic (it is one unit of work and does not dependent on previous and following
transactions), Consistent (data is either committed or roll back, no “in-between” case where something has
been updated and something hasn’t), Isolated (no transaction sees the intermediate results of the current
transaction), Durable (the values persist if the data had been committed even if the system crashes right
after).

35. What connections does Microsoft SQL Server support?
Windows Authentication (via Active Directory) and SQL Server authentication (via Microsoft SQL Server
username and passwords).
36. Which one is trusted and which one is untrusted?
Windows Authentication is trusted because the username and password are checked with the Active
Directory, the SQL Server authentication is untrusted, since SQL Server is the only verifier participating in the
transaction.
37. Why would you use untrusted verificaion?
Web Services might use it, as well as non-Windows applications.
38. What does the parameter Initial Catalog define inside Connection String?
The database name to connect to.
39. What’s the data provider name to connect to Access database?
Microsoft.Access.
40. What does Dispose method do with the connection object?
Deletes it from the memory.
41. What is a pre-requisite for connection pooling?
Multiple processes must agree that they will share the same connection, where every parameter is the same,
including the security settings.
42. What’s the implicit name of the parameter that gets passed into the class’ set method?
Value, and it’s datatype depends on whatever variable we’re changing.
43. How do you inherit from a class in C#?
Place a colon and then the name of the base class.
44. Does C# support multiple inheritance?
No, use interfaces instead.
45. When you inherit a protected class-level variable, who is it available to?
Classes in the same namespace.
46. Are private class-level variables inherited?
Yes, but they are not accessible, so looking at it you can honestly say that they are not inherited. But they are.

47. What’s the top .NET class that everything is derived from?
System.Object.
48. How’s method overriding different from overloading?
When overriding, you change the method behavior for a derived class. Overloading simply involves having a
method with the same name within the class.
49. What does the keyword virtual mean in the method definition?
The method can be over-ridden.
50. Can you declare the override method static while the original method is non-static?
No, you can’t, the signature of the virtual method must remain the same, only the keyword virtual is changed
to keyword override.
51. Can you override private virtual methods?
No, moreover, you cannot access private methods in inherited classes, have to be protected in the base class
to allow any sort of access.
52. Can you allow class to be inherited, but prevent the method from being over-ridden?
Yes, just leave the class public and make the method sealed.
53. What’s an interface class?
It’s an abstract class with public abstract methods all of which must be implemented in the inherited classes.
54. Can you inherit multiple interfaces?
Yes, why not.
55. And if they have conflicting method names?
It’s up to you to implement the method inside your own class, so implementation is left entirely up to you. This
might cause a problem on a higher-level scale if similarly named methods from different interfaces expect
different data, but as far as compiler cares you’re okay.
56. What’s the difference between an interface and abstract class?
In the interface all methods must be abstract, in the abstract class some methods can be concrete. In the
interface no accessibility modifiers are allowed, which is ok in abstract classes.
57. How can you overload a method?
Different parameter data types, different number of parameters, different order of parameters.

58. If a base class has a bunch of overloaded constructors, and an inherited class has another bunch of
overloaded constructors, can you enforce a call from an inherited constructor to an arbitrary base
constructor?
Yes, just place a colon, and then keyword base (parameter list to invoke the appropriate constructor) in the
overloaded constructor definition inside the inherited class.
59. Is it namespace class or class namespace?
The .NET class library is organized into namespaces. Each namespace contains a functionally related group of
classes so natural namespace comes first.
60. Where is a protected class-level variable available?
It is available to any sub-class derived from base class
61. Are private class-level variables inherited?
Yes, but they are not accessible.
62. Describe the accessibility modifier “protected internal”.
It is available to classes that are within the same assembly and derived from the specified base class.
63. What does the term immutable mean?
The data value may not be changed.
Note: The variable value may be changed, but the original immutable data value was discarded and a new data
value was created in memory.
64. What is the syntax to inherit from a class in C#?
Place a colon and then the name of the base class.
Example: class MyNewClass : MyBaseClass
65. Can you prevent your class from being inherited by another class?
Yes. The keyword “sealed” will prevent the class from being inherited.
66. Can you allow a class to be inherited, but prevent the method from being over-ridden?
Yes. Just leave the class public and make the method sealed.
67. What’s an abstract class?
A class that cannot be instantiated. An abstract class is a class that must be inherited and have the methods
overridden. An abstract class is essentially a blueprint for a class without any implementation.

68. When do you absolutely have to declare a class as abstract?
1. When the class itself is inherited from an abstract class, but not all base abstract methods have been
overridden.
2. When at least one of the methods in the class is abstract.
69. What is an interface class?
Interfaces, like classes, define a set of properties, methods, and events. But unlike classes, interfaces do not
provide implementation. They are implemented by classes, and defined as separate entities from classes.
70. Why can’t you specify the accessibility modifier for methods inside the interface?
They all must be public, and are therefore public by default.
71. What happens if you inherit multiple interfaces and they have conflicting method names?
It’s up to you to implement the method inside your own class, so implementation is left entirely up to you. This
might cause a problem on a higher-level scale if similarly named methods from different interfaces expect
different data, but as far as compiler cares you’re okay.
72. What is the difference between a Struct and a Class?
Structs are value-type variables and are thus saved on the stack, additional overhead but faster retrieval.
Another difference is that structs cannot inherit.
73. What does the keyword “virtual” declare for a method or property?
The method or property can be overridden.
74. How is method overriding different from method overloading?
When overriding a method, you change the behavior of the method for the derived class. Overloading a
method simply involves having another method with the same name within the class.
75. Can you declare an override method to be static if the original method is not static?
No. The signature of the virtual method must remain the same. (Note: Only the keyword virtual is changed to
keyword override)
76. What are the different ways a method can be overloaded?
Different parameter data types, different number of parameters, different order of parameters.
77. If a base class has a number of overloaded constructors, and an inheriting class has a number of
overloaded constructors; can you enforce a call from an inherited constructor to a specific base constructor?
Yes, just place a colon, and then keyword base (parameter list to invoke the appropriate constructor) in the
overloaded constructor definition inside the inherited class.

DBMS Interview Questions
1. What is database?
A database is a collection of information that is organized. So that it can easily be accessed, managed, and
updated.
2. What is DBMS?
DBMS stands for Database Management System. It is a collection of programs that enables user to create and
maintain a database.
3. What is a Database system?
The database and DBMS software together is called as Database system.
4. What are the advantages of DBMS?
I. Redundancy is controlled.
II. Providing multiple user interfaces.
III. Providing backup and recovery
IV. Unauthorized access is restricted.
V. Enforcing integrity constraints.
5. What is normalization?
It is a process of analysing the given relation schemas based on their Functional Dependencies (FDs) and
primary key to achieve the properties
(1).Minimizing redundancy, (2). Minimizing insertion, deletion and update anomalies.
6. What is Data Model?
A collection of conceptual tools for describing data, data relationships data semantics and constraints.
7. What is E-R model?
This data model is based on real world that consists of basic objects called entities and of relationship among
these objects. Entities are described in a database by a set of attributes.
8. What is Object Oriented model?
This model is based on collection of objects. An object contains values stored in instance variables with in the
object. An object also contains bodies of code that operate on the object. These bodies of code are called
methods. Objects that contain same types of values and the same methods are grouped together into classes.
9. What is an Entity?
An entity is a thing or object of importance about which data must be captured.

10. What is DDL (Data Definition Language)?
A data base schema is specifies by a set of definitions expressed by a special language called DDL.
11. What is DML (Data Manipulation Language)?
This language that enable user to access or manipulate data as organised by appropriate data model.
Procedural DML or Low level: DML requires a user to specify what data are needed and how to get those data.
Non-Procedural DML or High level: DML requires a user to specify what data are needed without specifying
how to get those data
12. What is DML Compiler?
It translates DML statements in a query language into low-level instruction that the query evaluation engine
can understand.
13. What is Query evaluation engine?
It executes low-level instruction generated by compiler.
14. What is Functional Dependency?
Functional Dependency is the starting point of normalization. Functional Dependency exists when a relation
between two attributes allows you to uniquely determine the corresponding attribute’s value.
15. What is 1 NF (Normal Form)?
The first normal form or 1NF is the first and the simplest type of normalization that can be implemented in a
database. The main aims of 1NF are to:
1. Eliminate duplicative columns from the same table.
2. Create separate tables for each group of related data and identify each row with a unique column (the
primary key).
16. What is Fully Functional dependency?
A functional dependency X Y is full functional dependency if removal of any attribute A from X means that the
dependency does not hold any more.
17. What is 2NF?
A relation schema R is in 2NF if it is in 1NF and every non-prime attribute A in R is fully functionally dependent
on primary key.
18. What is 3NF?
A relation is in third normal form if it is in Second Normal Form and there are no functional (transitive)
dependencies between two (or more) non-primary key attributes.
19. What is BCNF (Boyce-Codd Normal Form)?
A table is in Boyce-Codd normal form (BCNF) if and only if it is in 3NF and every determinant is a candidate
key.

20. What is 4NF?
Fourth normal form requires that a table be BCNF and contain no multi-valued dependencies.
21. What is 5NF?
A table is in fifth normal form (5NF) or Project-Join Normal Form (PJNF) if it is in 4NF and it cannot have a
lossless decomposition into any number of smaller tables.
22. What is a query?
A query with respect to DBMS relates to user commands that are used to interact with a data base.
23. What is meant by query optimization?
The phase that identifies an efficient execution plan for evaluating a query that has the least estimated cost is
referred to as query optimization.
24. What is an attribute?
It is a particular property, which describes the entity.
25. What is RDBMS?
Relational Data Base Management Systems (RDBMS) are database management systems that maintain data
records and indices in tables.
26. What’s difference between DBMS and RDBMS?
DBMS provides a systematic and organized way of storing, managing and retrieving from collection of logically
related information. RDBMS also provides what DBMS provides but above that it provides relationship
integrity.
27. What is SQL?
SQL stands for Structured Query Language. SQL is an ANSI (American National Standards Institute) standard
computer language for accessing and manipulating database systems. SQL statements are used to retrieve and
update data in a database.
28. What is Stored Procedure?
A stored procedure is a named group of SQL statements that have been previously created and stored in the
server database.
29. What is a view?
A view may be a subset of the database or it may contain virtual data that is derived from the database files
but is not explicitly stored.
30. What is Trigger?
A trigger is a SQL procedure that initiates an action when an event (INSERT, DELETE or UPDATE) occurs.

31. What is Index?
An index is a physical structure containing pointers to the data.
32. What is extension and intension?
Extension -It is the number of tuples present in a table at any instance. This is time dependent.
Intension -It is a constant value that gives the name, structure of table and the constraints laid on it.
33. What do you mean by atomicity and aggregation?
Atomicity-Atomicity states that database modifications must follow an “all or nothing” rule. Each transaction is
said to be “atomic.” If one part of the transaction fails, the entire transaction fails.
Aggregation - A feature of the entity relationship model that allows a relationship set to participate in another
relationship set. This is indicated on an ER diagram by drawing a dashed box around the aggregation.
34. What is RDBMS KERNEL?
Two important pieces of RDBMS architecture are the kernel, which is the software, and the data dictionary,
which consists of the system- level data structures used by the kernel to manage the database.
35. Name the sub-systems of a RDBMS?
I/O, Security, Language Processing, Process Control, Storage Management, Logging and Recovery, Distribution
Control, Transaction Control, Memory Management, Lock Management.
36. How do you communicate with an RDBMS?
You communicate with an RDBMS using Structured Query Language (SQL)
37. Disadvantage in File Processing System?
· Data redundancy & inconsistency.
· Difficult in accessing data.
· Data isolation.
· Data integrity.
· Concurrent access is not possible.
· Security Problems.
38. What is VDL (View Definition Language)?
It specifies user views and their mappings to the conceptual schema.
39. What is SDL (Storage Definition Language)?
This language is to specify the internal schema. This language may Specify the mapping between two schemas.

40. Describe concurrency control?
Concurrency control is the process managing simultaneous operations against a database so that database
integrity is no compromised. There are two approaches to concurrency control.
The pessimistic approach involves locking and the optimistic approach involves versioning.
41. Describe the difference between homogeneous and heterogeneous distributed database?
A homogenous database is one that uses the same DBMS at each node. A heterogeneous database is one that
may have a different DBMS at each node.
42. What is a distributed database?
A distributed database is a single logical database that is spread across more than one node or locations that
are all connected via some communication link.
43. Explain the difference between two and three-tier architectures?
Three-tier architecture includes a client and two server layers.
The application code is stored on the application server and the database is stored on the database server. A
two-tier architecture includes a client and one server layer. The database is stored on the database server.
44. Briefly describe the three types of SQL commands?
Data definition language commands are used to create, alter, and drop tables. Data manipulation commands
are used to insert, modify, update, and query data in the database. Data control language commands help the
DBA to control the database.
45. List some of the properties of a relation?
Relations in a database have a unique name and no multivalued attributes exist. Each row is unique and each
attribute within a relation has a unique name. The sequence of both columns and rows is irrelevant.
46. Explain the differences between an intranet and an extranet?
An Internet database is accessible by everyone who has access to a Web site. An intranet database limits
access to only people within a given organization.
47. What is SQL Deadlock?
Deadlock is a unique situation in a multi user system that causes two or more users to wait indefinitely for a
locked resource.
48. What is a Catalog?
A catalog is a table that contains the information such as structure of each file, the type and storage format of
each data item and various constraints on the data .The information stored in the catalog is called Metadata.
49. What is data ware housing & OLAP?
Data warehousing and OLAP (online analytical processing) systems are the techniques used in many companies
to extract and analyze useful information from very large databases for decision making .

50. Describe the three levels of data abstraction?
Physical level: The lowest level of abstraction describes how data are stored.
Logical level: The next higher level of abstraction, describes what data are stored in database and what
relationship among those data.
View level: The highest level of abstraction describes only part of entire database.
51. What is Data Independence?
Data independence means that the application is independent of the storage structure and access strategy of
data.
52. How many types of relationship exist in database designing?
There are three major relationship models:-
One-to-one
One-to-many
Many-to-many
53. What is order by clause?
ORDER BY clause helps to sort the data in either ascending order to descending
54. What is the use of DBCC commands?
DBCC stands for database consistency checker. We use these commands to check the consistency of the
databases, i.e., maintenance, validation task and status checks.
55. What is Collation?
Collation refers to a set of rules that determine how data is sorted and compared.
56. What is difference between DELETE & TRUNCATE commands?
Delete command removes the rows from a table based on the condition that we provide with a WHERE clause.
Truncate will actually remove all the rows from a table and there will be no data in the table after we run the
truncate command.
57. What is Hashing technique?
This is a primary file organization technique that provides very fast access to records on certain search
conditions.
58. What is a transaction?
A transaction is a logical unit of database processing that includes one or more database access operations.
59. What are the different phases of Transaction?
Analysis phase

Redo phase
Undo phase
60. What is “transparent dbms”?
It is one, which keeps its physical structure hidden from user.
61. What are the primitive operations common to all record management System?
Addition, deletion and modification.
62. Explain the differences between structured data and unstructured data.
Structured data are facts concerning objects and events. The most important structured data are numeric,
character, and dates.
Structured data are stored in tabular form. Unstructured data are multimedia data such as documents,
photographs, maps, images, sound, and video clips. Unstructured data are most commonly found on Web
servers and Web-enabled databases.
63. What are the major functions of the database administrator?
Managing database structure, controlling concurrent processing, managing processing rights and
responsibilities, developing database security, providing for database recovery, managing the DBMS and
maintaining the data repository.
64. What is a dependency graph?
A dependency graph is a diagram that is used to portray the connections between database elements.
65. Explain the difference between an exclusive lock and a shared lock?
An exclusive lock prohibits other users from reading the locked resource; a shared lock allows other users to
read the locked resource, but they cannot update it.
66. Explain the "paradigm mismatch" between SQL and application programming languages.
SQL statements return a set of rows, while an application program works on one row at a time. To resolve this
mismatch the results of SQL statements are processed as pseudofiles, using a cursor or pointer to specify
which row is being processed.
67. Name four applications for triggers.
(1)Providing default values, (2) enforcing data constraints,
(3) Updating views and (4) enforcing referential integrity
68. What are the advantages of using stored procedures?
The advantages of stored procedures are (1) greater security, (2) decreased network traffic, (3) the fact that
SQL can be optimized and (4) code sharing which leads to less work, standardized processing, and
specialization among developers.

69. Explain the difference between attributes and identifiers.
Entities have attributes. Attributes are properties that describe the entity's characteristics. Entity instances
have identifiers. Identifiers are attributes that name, or identify, entity instances.
70. What is Enterprise Resource Planning (ERP), and what kind of a database is used in an ERP application?
Enterprise Resource Planning (ERP) is an information system used in manufacturing companies and includes
sales, inventory, production planning, purchasing and other business functions. An ERP system typically uses a
multiuser database.
71. Describe the difference between embedded and dynamic SQL?
Embedded SQL is the process of including hard coded SQL statements. These statements do not change unless
the source code is modified. Dynamic SQL is the process of generating SQL on the fly.The statements
generated do not have to be the same each time.
72. Explain a join between tables
A join allows tables to be linked to other tables when a relationship between the tables exists. The
relationships are established by using a common column in the tables and often uses the primary/foreign key
relationship.
73. Describe a subquery.
A subquery is a query that is composed of two queries. The first query (inner query) is within the WHERE
clause of the other query (outer query).
74. Compare a hierarchical and network database model?
The hierarchical model is a top-down structure where each parent may have many children but each child can
have only one parent. This model supports one-to-one and one-to-many relationships.
The network model can be much more flexible than the hierarchical model since each parent can have
multiple children but each child can also have multiple parents. This model supports one-to-one, one-to-many,
and many-to-many relationships.
75. Explain the difference between a dynamic and materialized view.
A dynamic view may be created every time that a specific view is requested by a user. A materialized view is
created and or updated infrequently and it must be synchronized with its associated base table(s).
76. Explain what needs to happen to convert a relation to third normal form.
First you must verify that a relation is in both first normal form and second normal form. If the relation is not,
you must convert into second normal form. After a relation is in second normal form, you must remove all
transitive dependencies.
77. Describe the four types of indexes?
A unique primary index is unique and is used to find and store a row. A nonunique primary index is not unique
and is used to find a row but also where to store a row (based on its unique primary index). A unique
secondary index is unique for each row and used to find table rows. A nonunique secondary index is not
unique and used to find table rows.

78. Explain minimum and maximum cardinality?
Minimum cardinality is the minimum number of instances of an entity that can be associated with each
instance of another entity. Maximum cardinality is the maximum number of instances of an entity that can be
associated with each instance of another entity.
79. What is deadlock? How can it be avoided? How can it be resolved once it occurs?
Deadlock occurs when two transactions are each waiting on a resource that the other transaction holds.
Deadlock can be prevented by requiring transactions to acquire all locks at the same time; once it occurs, the
only way to cure it is to abort one of the transactions and back out of partially completed work.
80. Explain what we mean by an ACID transaction.
An ACID transaction is one that is atomic, consistent, isolated, and durable. Durable means that database
changes are permanent. Consistency can mean either statement level or transaction level consistency. With
transaction level consistency, a transaction may not see its own changes.Atomic means it is performed as a
unit.
81. Under what conditions should indexes be used?
Indexes can be created to enforce uniqueness, to facilitate sorting, and to enable fast retrieval by column
values. A good candidate for an index is a column that is frequently used with equal conditions in WHERE
clauses.
82. What is difference between SQL and SQL SERVER?
SQL is a language that provides an interface to RDBMS, developed by IBM. SQL SERVER is a RDBMS just like
Oracle, DB2.
83. What is Specialization?
It is the process of defining a set of subclasses of an entity type where each subclass contain all the attributes
and relationships of the parent entity and may have additional attributes and relationships which are specific
to itself.
84. What is generalization?
It is the process of finding common attributes and relations of a number of entities and defining a common
super class for them.
85. What is meant by Proactive, Retroactive and Simultaneous Update?
Proactive Update: The updates that are applied to database before it becomes effective in real world.
Retroactive Update: The updates that are applied to database after it becomes effective in real world.
Simultaneous Update: The updates that are applied to database at the same time when it becomes effective in
real world.

86. What is RAID Technology?
Redundant array of inexpensive (or independent) disks. The main goal of raid technology is to even out the
widely different rates of performance improvement of disks against those in memory and microprocessor. Raid
technology employs the technique of data striping to achieve higher transfer rates.
87. What are serial, non serial schedule?
A schedule S is serial if, for every transaction T participating in the schedule, all the operations of T is executed
consecutively in the schedule, otherwise, the schedule is called non-serial schedule.
88. What are conflict serializable schedules?
A schedule S of n transactions is serializable if it is equivalent to some serial schedule of the same n
transactions.
89. What is view serializable?
A schedule is said to be view serializable if it is view equivalent with some serial schedule.
90. What is a foreign key?
A key of a relation schema is called as a foreign key if it is the primary key of
some other relation to which it is related to.
91. What are the disadvantages of using a dbms?
1) High initial investments in h/w, s/w, and training.
2) Generality that a DBMS provides for defining and processing data.
3) Overhead for providing security, concurrency control, recovery, and integrity functions.
92. What is Lossless join property?
It guarantees that the spurious tuple generation does not occur with respect to relation schemas after
decomposition.
93. What is a Phantom Deadlock?
In distributed deadlock detection, the delay in propagating local information might cause the deadlock
detection algorithms to identify deadlocks that do not really exist. Such situations are called phantom
deadlocks and they lead to unnecessary aborts.
94. What is a checkpoint and When does it occur?
A Checkpoint is like a snapshot of the DBMS state. By taking checkpoints, the DBMS can reduce the amount of
work to be done during restart in the event of subsequent crashes.
95. What is schema?
The description of a data base is called the database schema , which is specified during database design and is
not expected to change frequently . A displayed schema is called schema diagram .We call each object in the
schema as schema construct.

OS Interview Questions
1. What is an operating system?
An operating system is a program that acts as an intermediary between the user and the computer hardware.
The purpose of an OS is to provide a convenient environment in which user can execute programs in a
convenient and efficient manner.
2. What are the different operating systems?
1. Batched operating systems
2. Multi-programmed operating systems
3. timesharing operating systems
4. Distributed operating systems
5. Real-time operating systems
3. What are the basic functions of an operating system?
Operating system controls and coordinates the use of the hardware among the various applications programs
for various uses. Operating system acts as resource allocator and manager. Also operating system is control
program which controls the user programs to prevent errors and improper use of the computer. It is especially
concerned with the operation and control of I/O devices.
4. What is kernel?
Kernel is the core and essential part of computer operating system that provides basic services for all parts of
OS.
5. What is difference between micro kernel and macro kernel?
Micro kernel is a kernel which run services those are minimal for operating system performance. In this kernel
all other operations are performed by processor.
Macro Kernel is a combination of micro and monolithic kernel. In monolithic kernel all operating system code
is in single executable image.
6. What is dead lock?
Deadlock is a situation or condition where the two processes are waiting for each other to complete so that
they can start. This result both the processes to hang.
7. What is a process?
A program in execution is called a process.
Processes are of two types:
1. Operating system processes
2. User processes
8. What are the states of a process?
1. New
2. Running
3. Waiting
4. Ready

5. Terminated
9. What is starvation and aging?
Starvation is Resource management problem where a process does not get the resources it needs for a long
time because the resources are being allocated to other processes.
Aging is a technique to avoid starvation in a scheduling system.
10. What is semaphore?
Semaphore is a variable, whose status reports common resource, Semaphore is of two types one is Binary
semaphore and other is Counting semaphore.
11. What is context switching?
Transferring the control from one process to other process requires saving the state of the old process and
loading the saved state for new process. This task is known as context switching.
12. What is a thread?
A thread is a program line under execution. Thread sometimes called a light-weight process, is a basic unit of
CPU utilization; it comprises a thread id, a program counter, a register set, and a stack
13. What is process synchronization?
A situation, where several processes access and manipulate the same data concurrently and the outcome of
the execution depends on the particular order in which the access takes place, is called race condition. To
guard against the race condition we need to ensure that only one process at a time can be manipulating the
same data. The technique we use for this is called process synchronization.
14. What is virtual memory?
Virtual memory is hardware technique where the system appears to have more memory that it actually does.
This is done by time-sharing, the physical memory and storage parts of the memory one disk when they are
not actively being used.
15. What is thrashing?
It is a phenomenon in virtual memory schemes when the processor spends most of its time swapping pages,
rather than executing instructions. This is due to an inordinate number of page faults.
16. What is fragmentation? Tell about different types of fragmentation?
When many of free blocks are too small to satisfy any request then fragmentation occurs. External
fragmentation and internal fragmentation are two types of fragmentation. External Fragmentation happens
when a dynamic memory allocation algorithm allocates some memory and a small piece is left over that
cannot be effectively used. Internal fragmentation is the space wasted inside of allocated memory blocks
because of restriction on the allowed sizes of allocated blocks.
17. What are necessary conditions for dead lock?
1. Mutual exclusion (where at least one resource is non-sharable)
2. Hold and wait (where a process holds one resource and waits for other resource)

3. No preemption (where the resources can’t be preempted)
4. Circular wait (where p*i+ is waiting for p*j+ to release a resource. i= 1,2,…n
j=if (i!=n) then i+1
else 1 )
18. What is cache memory?
Cache memory is random access memory (RAM) that a computer microprocessor can access more quickly than
it can access regular RAM. As the microprocessor processes data, it looks first in the cache memory and if it
finds the data there (from a previous reading of data), it does not have to do the more time-consuming
reading of data from larger memory.
19. What is logical and physical addresses space?
Logical address space is generated from CPU; it bound to a separate physical address space is central to proper
memory management. Physical address space is seen by the memory unit. Logical address space is virtual
address space. Both these address space will be same at compile time but differ at execution time.
20. Differentiate between Complier and Interpreter?
An interpreter reads one instruction at a time and carries out the actions implied by that instruction. It does
not perform any translation. But a compiler translates the entire instructions
21. What is Throughput, Turnaround time, waiting time and Response time?
Throughput – number of processes that complete their execution per time unit
Turnaround time – amount of time to execute a particular process
Waiting time – amount of time a process has been waiting in the ready queue
Response time – amount of time it takes from when a request was submitted until the first response is
produced, not output (for time-sharing environment)
22. What is Memory-Management Unit (MMU)?
Hardware device that maps virtual to physical address. In MMU scheme, the value in the relocation register is
added to every address generated by a user process at the time it is sent to memory.
->The user program deals with logical addresses; it never sees the real physical addresses
23. What is a Real-Time System?
A real time process is a process that must respond to the events within a certain time period. A real time
operating system is an operating system that can run real time processes successfully
24. What is a trap and trapdoor?
Trapdoor is a secret undocumented entry point into a program used to grant access without normal methods
of access authentication. A trap is a software interrupt, usually the result of an error condition.

25. When is a system in safe state?
The set of dispatchable processes is in a safe state if there exists at least one temporal order in which all
processes can be run to completion without resulting in a deadlock.
26. Explain the concept of the Distributed systems?
Distributed systems work in a network. They can share the network resources, communicate with each other.
27. What is cache-coherency?
In a multiprocessor system there exist several caches each may containing a copy of same variable A. Then a
change in one cache should immediately be reflected in all other caches this process of maintaining the same
value of a data in all the caches s called cache-coherency.
28. What is a long term scheduler & short term schedulers?
Long term schedulers are the job schedulers that select processes from the job queue and load them into
memory for execution. The short term schedulers are the CPU schedulers that select a process from the ready
queue and allocate the CPU to one of them.
29. Explain the meaning of mutex.
Mutex is the short form for ‘Mutual Exclusion object’. A mutex allows multiple threads for sharing the same
resource. The resource can be file. A mutex with a unique name is created at the time of starting a program. A
mutex must be locked from other threads, when any thread that needs the resource. When the data is no
longer used / needed, the mutex is set to unlock.
30. What is cycle stealing?
We encounter cycle stealing in the context of Direct Memory Access (DMA). Either the DMA controller can use
the data bus when the CPU does not need it, or it may force the CPU to temporarily suspend operation. The
latter technique is called cycle stealing. Note that cycle stealing can be done only at specific break points in an
instruction cycle.
31. What is Marshalling?
The process of packaging and sending interface method parameters across thread or process boundaries.
32. What is a daemon?
Daemon is a program that runs in the background without user’s interaction. A daemon runs in a multitasking
operating system like UNIX. A daemon is initiated and controlled by special programs known as ‘processes’.
33. What is pre-emptive and non-preemptive scheduling?
Preemptive scheduling: The preemptive scheduling is prioritized. The highest priority process should always be
the process that is currently utilized.
Non-Preemptive scheduling: When a process enters the state of running, the state of that process is not
deleted from the scheduler until it finishes its service time.

34. What is busy waiting?
The repeated execution of a loop of code while waiting for an event to occur is called busy-waiting. The CPU is
not engaged in any real productive activity during this period, and the process does not progress toward
completion.
35. What is page cannibalizing?
Page swapping or page replacements are called page cannibalizing.
36. What is SMP?
To achieve maximum efficiency and reliability a mode of operation known as symmetric multiprocessing is
used. In essence, with SMP any process or threads can be assigned to any processor.
37. What is process migration?
It is the transfer of sufficient amount of the state of process from one machine to the target machine.
38. Difference between Primary storage and secondary storage?
Primary memory is the main memory (Hard disk, RAM) where the operating system resides.
Secondary memory can be external devices like CD, floppy magnetic discs etc. secondary storage cannot be
directly accessed by the CPU and is also external memory storage.
39. Define compactions.
Compaction is a process in which the free space is collected in a large memory chunk to make some space
available for processes.
40. What are residence monitors?
Early operating systems were called residence monitors.
41. What is dual-mode operation?
In order to protect the operating systems and the system programs from the malfunctioning programs the two
mode operations were evolved
System mode
User mode.
42. What is a device queue?
A list of processes waiting for a particular I/O device is called device queue.
43. What are the different types of Real-Time Scheduling?
Hard real-time systems required to complete a critical task within a guaranteed amount of time.
Soft real-time computing requires that critical processes receive priority over less fortunate ones.

44. What is relative path and absolute path?
Absolute path-- Exact path from root directory.
Relative path-- Relative to the current path.
45. What are the disadvantages of context switching?
Time taken for switching from one process to other is pure overhead. Because the system does no useful work
while switching. So one of the solutions is to go for threading whenever possible.
46. What is a data register and address register?
Data registers - can be assigned to a variety of functions by the programmer. They can be used with any
machine instruction that performs operations on data.
Address registers - contain main memory addresses of data and instructions or they contain a portion of the
address that is used in the calculation of the complete addresses.
47. What is DRAM?
Dynamic Ram stores the data in the form of Capacitance, and Static RAM stores the data in Voltages.
48. What are local and global page replacements?
Local replacement means that an incoming page is brought in only to the relevant process' address space.
Global replacement policy allows any page frame from any process to be replaced. The latter is applicable to
variable partitions model only.
49. Explain the concept of the batched operating systems?
In batched operating system the users gives their jobs to the operator who sorts the programs according to
their requirements and executes them. This is time consuming but makes the CPU busy all the time.
50. What is SCSI?
SCSI - Small computer systems interface is a type of interface used for computer components such as hard
drives, optical drives, scanners and tape drives. It is a competing technology to standard IDE (Integrated Drive
Electronics).
51.When is a system in safe state?
The set of dispatch able processes is in a safe state if there exists at least one temporal order in which all
processes can be run to completion without resulting in a deadlock.
52. What is cycle stealing?
We encounter cycle stealing in the context of Direct Memory Access (DMA). Either the DMA controller can use
the data bus when the CPU does not need it, or it may force the CPU to temporarily suspend operation. The
latter technique is called cycle stealing. Note that cycle stealing can be done only at specific break points in an
instruction cycle.
53. What is an idle thread?
The special thread a dispatcher will execute when no ready thread is found.

54. What is FtDisk?
It is a fault tolerance disk driver for Windows NT.
55.What is Dispatcher?
Dispatcher module gives control of the CPU to the process selected by the short-term scheduler; this involves:
Switching context, Switching to user mode, Jumping to the proper location in the user program to restart that
program, dispatch latency – time it takes for the dispatcher to stop one process and start another running.
56. When does the condition 'rendezvous' arise?
In message passing, it is the condition in which, both, the sender and receiver are blocked until the message is
delivered.
57. What is process spawning?
When the OS at the explicit request of another process creates a process, this action is called process spawning
58. What are the reasons for process suspension?
1) swapping
2) interactive user request
3) timing
4) parent process request
59. What are the sub-components of I/O manager in Windows NT?
1) Network redirector/ Server
2) Cache manager.
3) File systems
4) Network driver
5) Device driver
60. What is a drawback of MVT?
1) ability to support multiple processors
2) virtual storage
3) source level debugging

Data Structure Interview Questions
1. Is it possible to find a loop in a Linked list ?
a. Possible at O(n)
b. Not possible
c. Possible at O(n^2) only
d. Depends on the position of loop
Solution: a. Possible at O(n)
Have two pointers say P1 and P2 pointing to the first node of the list.
Start a loop and Increment P1 once and P2 twice in each iteration. At any point of time if P1==P2 then there is
a loop in that linked list. If P2 reaches NULL (end of linked list) then no loop exists.
2. Two linked lists L1 and L2 intersect at a particular node N1 and from there all other nodes till the end are
common. The length of the lists is not same. What are the possibilities to find N1?.
a. Solution exists for certain cases only
b. No linear solution exist
c. Linear solution is possible
d Only Non-linear solution exist.
Solution: c. Linear solution is possible
Have two pointers say P1 pointing to the first node of L1 and P2 to that of L2. Traverse through both the lists. If
P1 reaches L1’s last node, point it to the first node of L2 and continue traversing. Do the same thing for P2
when it reaches L2’s last node. (By doing this, we are balancing the difference in the length between the linked
lists. The shorter one will get over soon and by redirecting to longer list’s head, it will traverse the extra nodes
also.) Finally they will meet at the Intersection node.
3. void PrintTree (Tree T)
{
if (T != NULL)
{
PrintTree (T-> Left);
PrintElement (T-> Element);
PrintTree (T->Right);
}
}
The above method ‘PrintTree’ results in which of the following traversal
a Inorder
b. Preorder
c. Postorder
d. None of the above
Solution: a. Inorder
Inorder:
void PrintTree (Tree T)
{
if (T != NULL)
{
}
}
For preorder use this order

For postorder use this order
4. Given a Binary Search Tree (BST), print its values in ascending order.
a. Perform Depth first traversal
b. Perform Breadth first traversal
c. Perform Postorder traversal
d. Perform Inorder traversal
Solution: d. Perform Inorder traversal
It is the properfy of BST and Inorder traversal.
5. Is it possible to implement a queue using Linked List? Enqueue & Dequeue should be O(1).
a. Not possible to implement.
b Only Enqueue is possible at O(1).
c. Only Dequeue is possible at O(1).
d. Both Enqueue and Dequeue is possible at O(1)
Solution: d. Both Enqueue and Dequeue is possible at O(1)
Have two pointers H pointing to the Head and T pointing to the Tail of the linked list. Perform enqueue at T
and perform dequeue at H. Update the pointers after each operations accordingly.
6. Given a Tree, is it possible to find the greatest and least among leaves in linear time?.
a. Solution depends on the tree structure
b.Linear solution exist
c. Only Non-linear solution exists.
d. No linear solution exist
Solution: b. Linear solution exist
Have two variables Min and Max. Perform any tree traversal.Assign the first traversed leaf element to Min and
Max for all other leaf elements check with these variables and update it accordingly. If a current element is <
Min then update Min with that element. If it is > Min then check with Max.
Note: If you want to find the greatest and least among all nodes perform the checks for each node traversed.
7. Is it possible to find find the greatest and least value among the nodes in a given BST without using any
extra variables?
a. No solution exists.
b. Solution need 2 extra variables
c. Solution exist without any extra variables
d Solution need 1 extra variable
Solution: c. Solution exist without any extra variables
As per BST property, the left most node should be the least one and the rightmost node should be the
greatest. In other words, the first and last node of an In order traversal are the least and greatest among the
nodes respectively.
8. Is it possible to implement 2 stack in an array?
Condition: None of the stack should indicate an overflow until every slot of an array is used.
a. Only 1 stack can be implemented for the given condition

b. Stacks cannot be implemented in array
c. 2 stacks can be implemented for the given condition.
d. 2 stacks can be implemented if the given condition is applied only for 1 stack.
Solution: c. 2 stacks can be implemented for the given condition
Start 1st stack from left (1st position of an array) and 2nd from right (last position say n). Move 1st stack
towards right (i.e. 1, 2, 3 ...n) and 2nd towards left (i.e. n, n-1, n-2...1).
9. Given two keys K1 & K2, write an algorithm to print all the elements between them with K1<=K2 in a BST.
a. Solution need 2 extra spaces
b. Linear solution is possible without using any extra space
c No linear solution exist
d Solution need 1 extra space
Solution: b. Linear solution is possible without using any extra space
Perform an in order traversal. Once you find K1 print it and continue traversal now, print all other traversed
elements until you reach K2.
Note: If K1 == K2 stop once you find K1.
10. How many stacks are required to implement a Queue.
a. One
b. Two
c. Three
d. Two + one extra space.
Solution: b Two
Have two stacks S1 and S2.
For Enqueue, perform push on S1.
For Dequeue, if S2 is empty pop all the elements from S1 and push it to S2. The last element you popped from
S1 is an element to be dequeued. If S2 is not empty, then pop the top element in it.

TCS Interview Questions
1. What is your strongest programming language (Java, ASP, C, C++, VB, HTML, C#, etc.)?
Point to remember: Before interview You should decide your Favorite programming language and be
prepared based on that question.
2. Differences between C and Java?
1. JAVA is Object-Oriented while C is procedural.
2. Java is an Interpreted language while C is a compiled language.
3. C is a low-level language while JAVA is a high-level language.
4. C uses the top-down approach while JAVA uses the bottom-up approach.
5. Pointer go backstage in JAVA while C requires explicit handling of pointers.
6. The Behind-the-scenes Memory Management with JAVA & The User-Based Memory Management in C.
7.JAVA supports Method Overloading while C does not support overloading at all.
8. Unlike C, JAVA does not support Preprocessors, & does not really them.
9. The standard Input & Output Functions--C uses the printf & scanf functions as its standard input & output
while JAVA uses the System.out.print & System.in.read functions.
10. Exception Handling in JAVA and the errors & crashes in C.
3. In header files whether functions are declared or defined?
Functions are declared within header file. That is function prototypes exist in a header file,not function bodies.
They are defined in library (lib).
There are four types of storage classes in C. They are extern, register, auto and static
5. What does static variable mean?
Static is an access qualifier. If a variable is declared as static inside a function, the scope is limited to the
function, but it will exists for the life time of the program. Values will be persisted between successive
calls to a function
6. How do you print an address?
Use %p in printf to print the address.
7. What are macros? What are its advantages and disadvantages?
Macros are processor directive which will be replaced at compile time.
The disadvantage with macros is that they just replace the code they are not function calls. Similarly the
advantage is they can reduce time for replacing the same values.
8. Difference between pass by reference and pass by value?
Pass by value just passes the value from caller to calling function so the called function cannot modify the
values in caller function. But Pass by reference will pass the address to the caller function instead of value if
called function requires modifying any value it can directly modify.
9. What is an object?
Object is a software bundle of variables and related methods. Objects have state and behavior
10. What is a class?
Class is a user-defined data type in C++. It can be created to solve a particular kind of problem. After creation
the user need not know the specifics of the working of a class.
11. What is the difference between class and structure?
Structure: Initially (in C) a structure was used to bundle different type of data types together to perform a
particular functionality. But C++ extended the structure to contain functions also.
The major difference is that all declarations inside a structure are by default public.
Class: Class is a successor of Structure. By default all the members inside the class are private.

12. What is pointer?
Pointer is a variable in a program is something with a name, the value of which can vary. The way the compiler
and linker handles this is that it assigns
a specific block of memory within the computer to hold the value of that variable.
13. What is the difference between null and void pointers?
A Null pointer has the value 0. Void pointer is a generic pointer introduced by ANSI. Generic pointer can hold
the address of any data type.
14. What is function overloading?
Function overloading is a feature of C++ that allows us to create multiple functions with the same name, so
long as they have different parameters. Consider the following function:
int Add(int nX, int nY)
{
return nX + nY;
}
15. What is function overloading and operator overloading?
Function overloading: C++ enables several functions of the same name to be defined, as long as these
functions have different sets of parameters (at least as far as their types are concerned). This capability is
called function overloading. When an overloaded function is called, the C++ compiler selects the proper
function by examining the number, types and order of the arguments in the call. Function overloading is
commonly used to create several functions of the same name that perform similar tasks but on different data
types.
Operator overloading allows existing C++ operators to be redefined so that they work on objects of user-
defined classes. Overloaded operators are syntactic sugar for equivalent function calls. They form a pleasant
facade that doesn't add anything fundamental to the language (but they can improve understandability and
reduce maintenance costs).
16. What is friend function?
A friend function for a class is used in object-oriented programming to allow access to public, private, or
protected data in the class from the outside.
Normally, a function that is not a member of a class cannot access such information; neither can an external
class. Occasionally, such access will be advantageous for the programmer. Under these circumstances, the
function or external class can be declared as a friend of the class using the friend keyword.
17. What do you mean by inline function?
The idea behind inline functions is to insert the code of a called function at the point where the function is
called. If done carefully, this can improve the application's performance in exchange for increased compile
time and possibly (but not always) an increase in the size of the generated binary executable.
18. Tell me something about abstract classes?
An abstract class is a class which does not fully represent an object. Instead, it represents a broad range of
different classes of objects. However, this representation extends only to the features that those classes of
objects have in common. Thus, an abstract class provides only a partial description of its objects.
19. What is the difference between realloc() and free()?
The free subroutine frees a block of memory previously allocated by the malloc subroutine. Undefined results
occur if the Pointer parameter is not a valid pointer. If the Pointer parameter is a null value, no action will
occur. The realloc subroutine changes the size of the block of memory pointed to by the Pointer parameter to
the number of bytes specified by the Size parameter and returns a new pointer to the block. The pointer
specified by the Pointer parameter must have been created with the malloc, calloc, or realloc subroutines and
not been deallocated with the free or realloc subroutines. Undefined results occur if the Pointer parameter is
not a valid pointer.

20.What is the difference between an array and a list?
Array is collection of homogeneous elements. List is collection of heterogeneous elements.
For Array memory allocated is static and continuous. For List memory allocated is dynamic and random.
Array: User need not have to keep in track of next memory allocation.
List: User has to keep in Track of next location where memory is allocated.
Array uses direct access of stored members; list uses sequential access for members.
21. What are the differences between structures and arrays?
Arrays is a group of similar data types but Structures can be group of different data types
22. What is data structure?
A data structure is a way of organizing data that considers not only the items stored, but also their relationship
to each other. Advance knowledge about the relationship between data items allows designing of efficient
algorithms for the manipulation of data.
23. Can you list out the areas in which data structures are applied extensively?
Compiler Design,
Operating System,
Database Management System,
Statistical analysis package,
Numerical Analysis,
Graphics,
Artificial Intelligence,
Simulation
24.What are the advantages of inheritance?
It permits code reusability. Reusability saves time in program development. It encourages the reuse of proven
and debugged high-quality software, thus reducing problem after a system becomes functional.
25. What are the two integrity rules used in DBMS?
The two types of integrity rules are referential integrity rules and entity integrity rules. Referential integrity
rules dictate that a database does not contain orphan foreign key values. This means that
A primary key value cannot be modified if the value is used as a foreign key in a child table. Entity integrity
dictates that the primary key value cannot be Null.
26. Tell something about deadlock and how can we prevent dead lock?
In an operating system, a deadlock is a situation which occurs when a process enters a waiting state because a
resource requested by it is being held by another waiting process, which in turn is waiting for another
resource. If a process is unable to change its state indefinitely because the resources requested by it are being
used by other waiting process, then the system is said to be in a deadlock.
Mutual Exclusion: At least one resource must be non-shareable. [1] Only one process can use the resource at
any given instant of time.
Hold and Wait or Resource Holding: A process is currently holding at least one resource and requesting
additional resources which are being held by other processes.
No Preemption: The operating system must not de-allocate resources once they have been allocated; they
must be released by the holding process voluntarily.
Circular Wait: A process must be waiting for a resource which is being held by another process, which in turn is
waiting for the first process to release the resource. In general, there is a set of waiting processes, P = {P1, P2,
..., PN}, such that P1 is waiting for a resource held by P2, P2 is waiting for a resource held by P3 and so on till
PN is waiting for a resource held by P1.[1][7]
Thus prevention of deadlock is possible by ensuring that at least one of the four conditions cannot hold.
27. What are Insertion sort, selection sort, and bubble sort (basic differences among the functionality of the
three sorts and not the exact algorithms)

28. What is doubly link list?
A doubly linked list is a linked data structure that consists of a set of sequentially linked records called nodes.
Each node contains two fields, called links that are references to the previous and to the next node in the
sequence of nodes. The beginning and ending nodes' previous and next links, respectively, point to some kind
of terminator, typically a sentinel node or null, to facilitate traversal of the list. If there is only one sentinel
node, then the list is circularly linked via the sentinel node. It can be conceptualized as two singly linked lists
formed from the same data items, but in opposite sequential orders.
29. What is data abstraction? What are the three levels of data abstraction with Example?
Abstraction is the process of recognizing and focusing on important characteristics of a situation or object and
leaving/filtering out the un-wanted characteristics of that situation or object.
Let’s take a person as example and see how that person is abstracted in various situations
A doctor sees (abstracts) the person as patient. The doctor is interested in name, height, weight, age, blood
group, previous or existing diseases etc. of a person an employer sees (abstracts) a person as Employee. The
employer is interested in name, age, health, degree of study, work experience etc. of a person.
Abstraction is the basis for software development. It’s through abstraction we define the essential aspects of a
system. The process of identifying the abstractions for a given system is called as Modeling (or object
modeling).
Three levels of data abstraction are:
1. Physical level : how the data is stored physically and where it is stored in database.
2. Logical level: what information or data is stored in the database? e.g.: Database administrator
3.View level: end users work on view level. If any amendment is made it can be saved by other name.
30. What is command line argument?
Getting the arguments from command prompt in c is known as command line arguments. In c main function
has three arguments. They are:
Argument counter
Argument vector
Environment vector
31.Advantages of a macro over a function?
Macro gets to see the Compilation environment, so it can expand #defines. It is expanded by the
preprocessor.
Auto,register,static,extern
33. Which header file should you include if you are to develop a function which can accept variable number
of arguments?
stdarg.h
34. What is cache memory?
Cache Memory is used by the central processing unit of a computer to reduce the average time to access
memory. The cache is a smaller, faster memory
which stores copies of the data from the most frequently used main memory locations. As long as most
memory accesses are cached memory locations, the average
latency of memory accesses will be closer to the cache latency than to the latency of main memory.
35. What is debugger?
A debugger or debugging tool is a computer program that is used to test and debug other programs
36. Const char *p, char const *p what is the difference between the above two?
1) const char *p - Pointer to a Constant char ('p' isn't modifiable but the pointer is)
2) char const *p - Also pointer to a constant Char

However if you had something like:
char * const p - This declares 'p' to be a constant pointer to an char. (Char p is modifiable but the pointer isn't)
37. What is Memory Alignment?
Data structure alignment is the way data is arranged and accessed in computer memory. It consists of two
separate but related issues: data alignment and data structure padding.
38. Explain the difference between 'operator new' and the 'new' operator?
The difference between the two is that operator new just allocates raw memory, nothing else. The new
operator starts by using operator new to allocate memory, but then it invokes the constructor for the right
type of object, so the result is a real live object created in that memory. If that object contains any other
objects (either embedded or as base classes) those constructors as invoked as well.
39. Difference between delete and delete []?
The keyword delete is used to destroy the single variable memory created dynamically which is pointed by
single pointer variable.
Eg: int *r=new (int)
the memory pointed by r can be deleted by delete r.
delete [] is used to destroy array of memory pointed by single pointer variable.
Eg:int *r=new(int a[10])
The memory pointed by r can be deleted by delete []r.
40. What is conversion constructor?
A conversion constructor is a single-parameter constructor that is declared without the function specifier
'explicit'. The compiler uses conversion constructors to convert objects from the type of the first parameter to
the type of the conversion constructor's class.To define implicit conversions, C++ uses conversion constructors,
constructors that accept a single parameter and initialize an object to be a copy of that parameter.
41. What is a spanning Tree?
A spanning tree is a tree associated with a network. All the nodes of the graph appear on the tree once. A
minimum spanning tree is a spanning tree organized so that the total edge weight between nodes is
minimized.
42. Why should we use data ware housing and how can you extract data for analysis with example?
If you want to get information on all the techniques of designing, maintaining, building and retrieving data,
Data warehousing is the ideal method. A data warehouse is premeditated and generated for supporting the
decision making process within an organization.
Here are some of the benefits of a data warehouse:
o With data warehousing, you can provide a common data model for different interest areas regardless of
data's source. In this way, it becomes easier to report and analyze information.
o Many inconsistencies are identified and resolved before loading of information in data warehousing. This
makes the reporting and analyzing process simpler.
o The best part of data warehousing is that the information is under the control of users, so that in case the
system gets purged over time, information can be easily and safely stored for longer time period.
o Because of being different from operational systems, a data warehouse helps in retrieving data without
slowing down the operational system.
o Data warehousing enhances the value of operational business applications and customer relationship
management systems.
o Data warehousing also leads to proper functioning of support system applications like trend reports,
exception reports and the actual performance analyzing reports.
Data mining is a powerful new technology to extract data for analysis.

43. Explain recursive function & what is the data structures used to perform recursion?
a) A recursive function is a function which calls itself.
b) The speed of a recursive program is slower because of stack overheads. (This attribute is evident if you run
above C program.)
c) A recursive function must have recursive conditions, terminating conditions, and recursive expressions.
Stack data structure. Because of its LIFO (Last In First Out) property it remembers its caller so knows whom to
return when the function has to return. Recursion makes use of system stack for storing the return addresses
of the function calls. Every recursive function has its equivalent iterative (non-recursive) function. Even when
such equivalent iterative procedures are written, explicit stack is to be used.
44. Differentiate between Complier and Interpreter?
An interpreter reads one instruction at a time and carries out the actions implied by that instruction. It does
not perform any translation. But a compiler translates the entire instructions
45. What is scope of a variable?
Scope refers to the visibility of variables. It is very useful to be able to limit a variable's scope to a single
function. In other words, the variable wil have a limited scope
46. What is an interrupt?
Interrupt is an asynchronous signal informing a program that an event has occurred. When a program
receives an interrupt signal, it takes a specified action.
47. What is user defined exception in Java?
The keywords used in java application are try, catch and finally are used in implementing used-defined
exceptions. This Exception class inherits all the method from Throwable class.
48. What is java Applet?
Applet is java program that can be embedded into HTML pages. Java applets runs on the java enables web
browsers such as Mozilla and internet explorer. Applet is designed to run remotely on the client browser, so
there are some restrictions on it. Applet can't access system resources on the local computer. Applets are used
to make the web site more dynamic and entertaining.
49. What do you know about the garbage collector?
Garbage collection is the systematic recovery of pooled computer storage that is being used by a program
when that program no longer needs the storage. This frees the storage for use by other programs
(or processes within a program). It also ensures that a program using increasing amounts of pooled storage
does not reach its quota (in which case it may no longer be able to function).
Garbage collection is an automatic memory management feature in many modern programming languages,
such as Java and languages in the .NET framework. Languages that use garbage collection are often
interpreted or run within a virtual machine like the JVM. In each case, the environment that runs the code is
also responsible for garbage collection.
50. Write a Binary Search program
int binarySearch(int arr[],int size, int item)
{
int left, right, middle;
left = 0;
right = size-1;
while (left <= right)
{
middle = ((left + right)/2);
if (item == arr[middle])
{
return(middle);
}

if(item > arr[middle])
{
left = middle+1;
}
else
{
right = middle-1;
}
}
return(-1);
}
51. What are enumerations?
An enumeration is a data type, used to declare variable that store list of names. It is act like a database, which
will store list of items in the variable. Example: enum shapes{triangle, rectangle,...
52. What is static identifier?
The static identifier is used for initializing only once, and the value retains during the life time of the program /
application. A separate memory is allocated for ‘static’ variables. This value can be used between function
calls. The default value of an uninitialized static variable is zero. A function can also be defined as a static
function, which has the same scope of the static variable.
53. What is Cryptography?
Cryptography is the science of enabling secure communications between a sender and one or more recipients.
This is achieved by the sender scrambling a message (with a computer program and a secret key) and leaving
the recipient to unscramble the message (with the same computer program and a key, which may or may not
be the same as the sender's key).
There are two types of cryptography: Secret/Symmetric Key Cryptography and Public Key Cryptography
54. What is encryption?
Encryption is the transformation of information from readable form into some unreadable form.
55. What is decryption?
Decryption is the reverse of encryption; it's the transformation of encrypted data back into some intelligible
form.
56. What exactly is a digital signature?
Just as a handwritten signature is affixed to a printed letter for verification that the letter originated from its
purported sender, digital signature performs the same task for an electronic message. A digital signature is an
encrypted version of a message digest, attached together with a message.

WIPRO Interview Questions
Memory management in C
The C programming language manages memory statically, automatically, or dynamically.
Static-duration variables are allocated in main memory, usually along with the executable code of the
program, and persist for the lifetime of the program
Automatic-duration variables are allocated on the stack and come and go as functions are called and return.
For static-duration and automatic-duration variables, the size of the allocation is required to be compile-time
constant.
Dynamic memory allocation in which memory is more explicitly (but more flexibly) managed, typically, by
allocating it from the heap, an area of memory structured for this purpose.
In C, the library function malloc is used to allocate a block of memory on the heap. The program accesses this
block of memory via a pointer that malloc returns. When the memory is no longer needed, the pointer is
passed to free which deallocates the memory so that it can be used for other purposes.
Functionality of Operating Systems?
An operating system (OS) is a set of software that manages computer hardware resources and provides
common services for computer programs.
To act as interface between hardware and users, an operating system must be able perform the following
functions:
1. Enabling startup application programs. Thus, the operating system must have:
- A text editor
- A translator
- An editor of links
2. The allocation of resources needed to execute programs is done by identifying: the programs that are
running, the need for memory, peripheral devices and data protection requirements.
3. Facilities for data compression, sorting, mixing, cataloging and maintenance of libraries, through utility
programs available.
4. Plan implementation works according to certain criteria, for efficient use of central processing unit.
5. Assisting implementation of programs through computer-user communication system, at both hardware
and software level.
Examples of operating systems:BS2000,BS3000,DOS,PC-DOS,MS-DOS,LINUX,SOLARIS,MAC OS,UNIX,WINDOWS
What the use of IP address
An Internet Protocol address (IP address) is a numerical label assigned to each device (e.g., computer, printer)
participating in a computer network that uses the Internet Protocol for communication. An IP address serves
two principal functions: host or network interface identification and location addressing
What is difference between UNIQUE and PRIMARY KEY constraints?
A UNIQUE constraint is similar to PRIMARY key, but you can have more than one UNIQUE constraint per table.
Contrary to PRIMARY key UNIQUE constraints can accept NULL but just once. If the constraint is defined in a
combination of fields, then every field can accept NULL and can have some values on them, as long as the
combination values is unique.

What are the steps involved in designing?
Project plan, Requirements, Design, Coding, Testing, Re-coding and design, Development, Maintenance.
What is the difference between interface and multiple interfaces?
Both an abstract class and an interface are specific types of computer objects that allow a programmer to
loosely define one type of object as if it were another type, while retaining all of the object's original
properties. While multiple different computer languages use one or both of these concepts, Java is the most
well-known. Abstract classes and interfaces have a variety of similarities, but also incorporate significant
differences in structure, syntax, and usage.
How can we delete Duplicate row in table?
SQL> delete from table_name where rowid not in (select max(rowid) from table group by
duplicate_values_field_name);
When do you use SQL Profiler?
SQL Profiler utility allows us to basically track connections to the SQL Server and also determine activities
such as which SQL Scripts are running, failed jobs etc..
What do you meant by active and passive objects?
Active objects are one which instigates an interaction which owns a thread and they are responsible for
handling control to other objects. In simple words it can be referred as client.
Passive objects are one, which passively waits for the message to be processed. It waits for another object that
requires its services. In simple words it can be referred as server.
What do you meant by static and dynamic modeling?
Static modeling is used to specify structure of the objects that exist in the problem domain. These are
expressed using class, object and USECASE diagrams.
But Dynamic modeling refers representing the object interactions during runtime. It is represented by
sequence, activity, collaboration and statechart diagrams.
What is Program counter?
Program counter holds the address of either the first byte of the next instruction to be fetched for execution
or the address of the next byte of a multi byte instruction, which has not been completely fetched. In both the
cases it gets incremented automatically one by one as the instruction bytes get fetched. Also Program register
keeps the address of the next instruction.
Can you give an example of Stored Procedure?
CREATE procedure - is a stored procedure, which is a saved collection of Transact-SQL statements that can take
and return user-supplied parameters.
Benefits of Stored Procedures?
Reduced client/server traffic
efficient reuse of code and programming abstraction
Enhanced security controls
Is XML case-sensitive?
XML is case sensitive when uppercase and lowercase characters are treated differently.
Element type names, Attribute names, Attribute values, All general and parameter entity names, and data
content (text), are case-sensitive.
What is a Null object?
It is an object of some class whose purpose is to indicate that a real object of that class does not exist. One
common use for a null object is a return value from a member function that is supposed to return an object
with some specified properties but cannot find such an object.
What is the property of class?
A property is a member that provides access to an attribute of an object or a class. Examples of properties

include the length of a string, the size of a font, the caption of a window, the name of a customer, and so on.
Does a class inherit the constructors of its super class?
A class does not inherit constructors from any of its super classes.
If a class is declared without any access modifiers, where may the class be accessed?
A class that is declared without any access modifiers is said to have package access. This means that the class
can only be accessed by other classes’ and interfaces that are defined within the same package
What do you mean by Stack unwinding?
It is a process during exception handling when the destructor is called for all local objects between the place
where the exception was thrown and where it is caught.
Define precondition and post-condition to a member function.
Precondition: A condition that should return true when a member function is invoked. In order to use a
function correctly a precondition should return true. If a precondition fails to hold, an operation will not take
responsibility to perform any action of sensibility. For example, the interface invariants of stack class respond
nothing about pushing even though the stack is already full. In this scenario, sinful () is a precondition for push
operation.
Post-Condition: A condition that should return true before returning from an invoked function. In order to use
a function correctly a post condition should return true. Taking a stack as an example, is empty () must
necessarily be true after pushing the element into the stack when an element is pushed. The function is empty
() is a post condition.
How can you sort the elements of the array in descending order?
Syntax
B = sort(A)
B = sort(A,dim)
B = sort(...,mode)
[B,IX] = sort(A,...)
Description
B = sort(A) sorts the elements along different dimensions of an array, and arranges those elements in
ascending order.
If A is a ... sort(A) ...
Vector Sorts the elements of A.
Matrix Sorts each column of A.
Multidimensional array Sorts A along the first non-singleton dimension, and returns an array of
sorted vectors.
Cell array of strings Sorts the strings in ascending ASCII dictionary order, and returns a vector cell
array of strings. The sort is case-sensitive; uppercase letters appear in the output
before lowercase. You cannot use the dim or mode options with a cell array.
Sort - Sort array elements in ascending or descending order
Integer, floating-point, logical, and character arrays are permitted. Floating-point arrays can be complex. For
elements of A with identical values, the order of these elements is preserved in the sorted list. When A is
complex, the elements are sorted by magnitude, i.e., abs(A), and where magnitudes are equal, further sorted
by phase angle, i.e., angle(A), on the interval *−π, π+. If A includes any NaN elements, sort places these at the
high end.
B = sort(A,dim) sorts the elements along the dimension of A specified by a scalar dim.
B = sort(...,mode) sorts the elements in the specified direction, depending on the value of mode.
'ascend'
Ascending order (default)
'descend'

Descending order
[B,IX] = sort(A,...) also returns an array of indices IX, where size(IX) == size(A). If A is a vector, B = A(IX). If A is an
m-by-n matrix, then each column of IX is a permutation vector of the corresponding column of A, such that
for j = 1:n
B(:,j) = A(IX(:,j),j);
end
If A has repeated elements of equal value, the returned indices preserve the original ordering.
Example:Sort horizontal vector A:
A = [78 23 10 100 45 5 6];
sort(A)
ans =5 6 10 23 45 78 100
What is DOM?
The Document Object Model (DOM) is a cross-platform and language-independent convention for
representing and interacting with objects in HTML, XHTML and XML documents.[1] Objects in the DOM tree
may be addressed and manipulated by using methods on the objects. The public interface of a DOM is
specified in its application programming interface (API).
How macro execution is faster than function ?
Difference between overloading and overriding in programming language is:
a) In overloading, there is a relationship between methods available in the same class whereas in overriding,
there is relationship between a superclass method and subclass method.
b) Overloading does not block inheritance from the superclass whereas overriding blocks inheritance from the
superclass.
c) In overloading, separate methods share the same name whereas in overriding, subclass method replaces the
superclass.
d) Overloading must have different method signatures whereas overriding must have same signature.
19.what do you mean by realization in oops, what is persistent, transient object.
Name the operators that cannot be overloaded?
There are 5 operators which cannot be overloaded. They are:
.* - class member access operator
:: - scope resolution operator
. - dot operator
?:: - conditional operator
Sizeof() - operator
Note:- This is possible only in C++.
What is polymorphism?
In programming languages, polymorphism means that some code or operations or objects behave differently
in different contexts.
For example, the + (plus) operator in C++:
4 + 5 <-- integer addition
3.14 + 2.0 <-- floating point addition
s1 + "bar" <-- string concatenation!
In C++, that type of polymorphism is called overloading.
Typically, when the term polymorphism is used with C++, however, it refers to using virtual methods, which
we'll discuss shortly.

What are the differences between a C++ struct and C++ class?
The default member and base class access specifiers are different.
The C++ struct has all the features of the class. The only differences are that a struct defaults to public member
access and public base class inheritance, and a class defaults to the private access specifier and private base
class inheritance.
Before interview Please Refer this following programming Questions
Write a Program for:
1. Palindrome for string and number
2. String Reverse
3. Sum, Average of all the number
4. Prime no
5. Armstrong no
6. Fibonacci
7. Factorial
8. Prime number,
Palindrome for string
#include <stdio.h>
#include <string.h>
main()
{
char a[100], b[100];
printf("Enter the string to check if it is a palindromen");
gets(a);
strcpy(b,a);
strrev(b);
if( strcmp(a,b) == 0 )
printf("Entered string is a palindrome.n");
else
printf("Entered string is not a palindrome.n");
return 0;
}
Palindrome number in c
#include <stdio.h>
main()
{
int n, reverse = 0, temp;
printf("Enter a number to check if it is a palindrome or notn");
scanf("%d",&n);
temp = n;
while( temp != 0 )
{
reverse = reverse * 10;
reverse = reverse + temp%10;
temp = temp/10;
}

if ( n == reverse )
printf("%d is a palindrome number.n", n);
else
printf("%d is not a palindrome number.n", n);
return 0;
}
Reverse a string using C programming
#include<stdio.h>
#include<string.h>
main()
{
char arr[100];
printf("Enter a string to reversen");
gets(arr);
strrev(arr);
printf("Reverse of entered string is n%sn",arr);
return 0;
}
/* Fibonacci Series c language */
#include<stdio.h>
main()
{
int n, first = 0, second = 1, next, c;
printf("Enter the number of termsn");
scanf("%d",&n);
printf("First %d terms of Fibonacci series are :-n",n);
for ( c = 0 ; c < n ; c++ )
{
if ( c <= 1 )
next = c;
else
{
next = first + second;
first = second;
second = next;
}
printf("%dn",next);
}
return 0;
}
Fibonacci series program in c using recursion
#include<stdio.h>
int Fibonacci(int);
main()
{
int n, i = 0, c;
scanf("%d",&n);

printf("Fibonacci seriesn");
for ( c = 1 ; c <= n ; c++ )
{
printf("%dn", Fibonacci(i));
i++;
}
return 0;
}
int Fibonacci(int n)
{
if ( n == 0 )
return 0;
else if ( n == 1 )
return 1;
else
return ( Fibonacci(n-1) + Fibonacci(n-2) );
}
Adding numbers in c using function
#include<stdio.h>
long addition(long, long);
main()
{
long first, second, sum;
scanf("%ld%ld", &first, &second);
sum = addition(first, second);
printf("%ldn", sum);
return 0;
}
long addition(long a, long b)
{
long result;
result = a + b;
return result;
}

Infosys Interview Questions
1. Difference between C and C++?
a) C follows the procedural programming paradigm while C++ is a multi-paradigm language (procedural
as well as object oriented) In case of C, importance is given to the steps or procedure of the program
while C++ focuses on the data rather than the process. Also, it is easier to implement/edit the code in
case of C++ for the same reason.
b) In case of C, the data is not secured while the data is secured (hidden) in C++ This difference is due to
specific OOP features like Data Hiding which are not present in C.
c) C is a low-level language while C++ is a middle-level language C is regarded as a low-level language
(difficult interpretation & fewer users friendly) while C++ has features of both low-level
(concentration on what's going on in the machine hardware) & high-level languages (concentration on
the program itself) & hence is regarded as a middle-level language.
d) C uses the top-down approach while C++ uses the bottom-up approach In case of C, the program is
formulated step by step, each step is processed into detail while in C++, the base elements are first
formulated which then are linked together to give rise to larger systems.
e) C is function-driven while C++ is object-driven Functions are the building blocks of a C program while
objects are building blocks of a C++ program.
f) C++ supports function overloading while C does not. Overloading means two functions having the
same name in the same program. This can be done only in C++ with the help of Polymorphism (an
OOP feature)
g) We can use functions inside structures in C++ but not in C. In case of C++, functions can be used
inside a structure while structures cannot contain functions in C.
h) The NAMESPACE feature in C++ is absent in case of C. C++ uses NAMESPACE which avoid name
collisions. For instance, two students enrolled in the same university cannot have the same roll
number while two students in different universities might have the same roll number. The universities
are two different namespace & hence contain the same roll number (identifier) but the same
university (one namespace) cannot have two students with the same roll number (identifier)
i) The standard input & output functions differ in the two languages. C uses scanf & printf while C++
uses cin>> & cout<< as their respective input & output functions
j) C++ allows the use of reference variables while C does not. Reference variables allow two variable
names to point to the same memory location. We cannot use these variables in C programming.
k) C++ supports Exception Handling while C does not. C does not support it "formally" but it can always
be implemented by other methods. Though you don't have the framework to throw & catch
exceptions as in C++.
2. What is null pointer?
When referring to computer memory, a null pointer is a command used to direct a software program or
operating system to an empty location in the computer memory. Commonly, the null pointer is used to denote
the end of a memory search or processing event. In computer programming, a null pointer is a pointer that
does not point to any objects or function.
A nil pointer is a false value. For example, 1 > 2 is a nil statement.
In the programming language C, NULL is an available command that can be used, where nil is an available
command used in the Pascal programming language.

3. What are the 4 basics of OOP?
Abstraction, Inheritance, Encapsulation, and Polymorphism.
4. What you mean by Object Relational DBMS?
An object-relational database (ORD), or object-relational database management system (ORDBMS), is a
database management system (DBMS) similar to a relational database, but with an object-oriented database
model: objects, classes and inheritance are directly supported in database schemas and in the query language.
In addition, just as with proper relational systems, it supports extension of the data model with custom data-
types and methods.
5. Structural difference between bitmap and b-tree index?
Btree
It is made of branch nodes and leaf nodes. Branch nodes holds prefix key value along with the link to the leaf
node. The leaf node in turn contains the indexed value and rowed.
Bitmap
It simply consists of bits for every single distinct value. It uses a string of bits to quickly locate rows in a table.
Used to index low cardinality columns.
6. What is database Schema?
The formal definition of database schema is a set of formulas (sentences) called integrity constraints imposed
on a database.
7. What are the different levels of database schema?
Conceptual schema- a map of concepts and their relationships.
Logical schema- a map of entities and their attributes and relations
Physical schema- a particular implementation of a logical schema
Schema object- Oracle database object
8. What is difference between foreign key and reference key?
Reference Key is the primary key that is referenced in the other table (linked via the other tables Foreign
Key). Foreign Key is how you link the second table to the primary tables Primary Key (or Reference Key).
9. Tell me about DSN?
A Data Source Name (DSN) is the logical name that is used by Open Database Connectivity (ODBC) to refer to
the drive and other information that is required to access data. The name is used by Internet Information
Services (IIS) for a connection to an ODBC data source, such as a Microsoft SQL Server database.
10. Difference between Clustered index and non-clustered index ?
Clustered Index
Only one per table
Faster to read than non-clustered as data is physically stored in index order
Non Clustered Index
Can be used many times per table
Quicker for insert and update operations than a clustered index
11. What are WPF and WCF?
WPF/WCF application, need in .NET 3.0 Framework. This application will cover the following concepts:
WCF(Windows Communication Foundation)
The new service orientated attributes
The use of interfaces
The use of callbacks
Asynchronous delegates
Creating the proxy
WPF( Windows Presentation Foundation )
Styles
Templates
Animations
Databinding
Multithreading a WPF application

12. What is the difference between an EXE and a DLL?
The term EXE is a shortened version of the word executable as it identifies the file as a program. On the other
hand, DLL stands for Dynamic Link Library, which commonly contains functions and procedures that can be
used by other programs.
13.Tell how to check whether a linked list is circular.
Create two pointers, each set to the start of the list. Update each as follows:
while (pointer1) {
pointer2 = pointer2->next; if (pointer2) pointer2=pointer2->next;
print ("circularn");
}
}
14. How can u increase the heap size in the memory?
If heap size set too low then you will get "out of memory" errors. If you set it too high then your system will
hang or you will suffer poor performance because parts of the jvm will be swapped in and out of memory. A
rule of thumb is that you should not set this parameter larger than about 80% of your free physical memory.
On Windows XP machines you can determine your free physical memory from the Performance tab of the Task
Manager application.
Boosting the heap size parameter will allow you to read in larger file-based projects. It will also improve the
performance of the database back-end since more memory is available for caching.In Java Set the maximum
heap size, using the -Xmx command-line option, to a value that allows the application to run with 70%
occupancy of the Java heap.The Java heap occupancy often varies over time as the load applied to the
application varies. For applications where occupancy varies, set the maximum Java heap size so that there is
70% occupancy at the highest point, and set the minimum heap size, using the -Xms command line option, so
that the Java heap is 40% occupied at its lowest memory usage. If these values are set, the Java memory
management algortihms can modify the heap size over time according to the application load, while
maintaining usage in the optimal area of between 40% and 70% occupancy.
15. Why is it difficult to store linked list in an array?
Both Arrays and Linked List can be used to store linear data of similar types.
Linked list provide dynamic size while the size of array is fixed, So we must know the upper limit on the
number of elements in advance.
Linked lists have following drawbacks:
1) Random access is not allowed. We have to access elements sequentially starting from the first node. So we
cannot do binary search with linked lists.
2) Extra memory space for a pointer is required with each element of the list.
3) Arrays have better cache locality that can make a pretty big difference in performance.
16. Different types of keys in SQL?
The different types of Keys in sql server are,
A candidate key acts as a unique key. A unique key can be a Primary key. A candidate key can be a single
column or combination of columns. Multiple candidate keys are allowed in a table.
Primary Key
To uniquely identify a row, Primary key is used.
A table allows only one Primary key
A Primary key can be a single column or combination of columns.
Foreign Key
A foreign key in a table is a key which refer another table’s primary key . A primary key can be referred by
multiple foreign keys from other tables. It is not required for a primary key to be the reference of any foreign
keys. The interesting part is that a foreign key can refer back to the same table but to a different column. This
kind of foreign key is known as “self-referencing foreign key”.

17. Explain about Joins, Views, Normalization, and Triggers?
The JOIN keyword is used in an SQL statement to query data from two or more tables, based on a relationship
between certain columns in these tables.
Tables in a database are often related to each other with keys.
A view is a virtual table. A view contains rows and columns, just like a real table. The fields in a view are fields
from one or more real tables in the database.
You can add SQL functions, WHERE, and JOIN statements to a view and present the data as if the data were
coming from one single table.
Normalization is the process of efficiently organizing data in a database. There are two goals of the
normalization process: eliminating redundant data (for example, storing the same data in more than one table)
and ensuring data dependencies make sense (only storing related data in a table). Both of these are worthy
goals as they reduce the amount of space a database consumes and ensure that data is logically stored.
First Normal Form (1NF)
sets the very basic rules for an organized database:
Eliminate duplicative columns from the same table.
Create separate tables for each group of related data and identify each row with a unique column or set of
columns (the primary key).
Second Normal Form (2NF)
further addresses the concept of removing duplicative data:
Meet all the requirements of the first normal form.
Remove subsets of data that apply to multiple rows of a table and place them in separate tables.
Create relationships between these new tables and their predecessors through the use of foreign keys.
Third Normal Form (3NF)
Meet all the requirements of the second normal form.
Remove columns that are not dependent upon the primary key.
Boyce-Codd Normal Form (BCNF or 3.5NF)
It also referred to as the "third and half (3.5) normal form", adds one more requirement:
Meet all the requirements of the third normal form.
Every determinant must be a candidate key.
Fourth Normal Form (4NF)
Meet all the requirements of the third normal form.
A relation is in 4NF if it has no multi-valued dependencies.
Remember, these normalization guidelines are cumulative. For a database to be in 2NF, it must first fulfill all
the criteria of a 1NF database.
In a DBMS, a trigger is a SQL procedure that initiates an action (i.e., fires an action) when an event (INSERT,
DELETE or UPDATE) occurs. Since triggers are event-driven specialized procedures, they are stored in and
managed by the DBMS. A trigger cannot be called or executed; the DBMS automatically fires the trigger as a
result of a data modification to the associated table. Triggers are used to maintain the referential integrity of
data by changing the data in a systematic fashion. Each trigger is attached to a single, specified table in the
database.
18. What is the difference between socket and session?
The Socket is a Combination of Ip address and Port Number (in pairs)
Session is a Logical Connectivity between the source and destination
19. What is a default gateway?
In organizational systems a gateway is a node that routes the traffic from a workstation to another network
segment. The default gateway commonly connects the internal networks and the outside network (Internet).
In such a situation, the gateway node could also act as a proxy server and a firewall. The gateway is also
associated with both a router, which uses headers and forwarding tables to determine where packets are sent,
and a switch, which provides the actual path for the packet in and out of the gateway.

20. Given an array of 1s and 0s arrange the 1s together and 0s together in a single scan of the array.
Optimize the boundary conditions.
void main()
{
int A[10]={'0','1','0','1','0','0','0','1','0','1','0','0'};
int x=0,y=A.length-1;
while(x<y){
if(!A[x])
x++;
else if(A[y])
y--;
if(A[x] && !A[y])//here we are checking that stating index is having 1 and last index having 0 than swap values
A[x]=0,A[y]=1;
}
getch()
}
21.Define Data Abstraction. What is its importance?
Abstraction is the process of recognizing and focusing on important characteristics of a situation or object and
leaving/filtering out the un-wanted characteristics of that situation or object.
Abstraction is the basis for software development. It’s through abstraction we define the essential aspects of a
system. The process of identifying the abstractions for a given system is called as Modeling (or object
modeling).
Three levels of data abstraction are:
1. Physical level : how the data is stored physically and where it is stored in database.
2. Logical level: what information or data is stored in the database. eg: Database administrator
3.View level : end users work on view level. if any amendment is made it can be saved by other name.
22. Write a program to swap two numbers without using a temporary variable.
void swap(int &i, int &j)
{
i=i+j;
j=i-j;
i=i-j;
}
23. Memory Allocation in C/C++
calloc() allocates a memory area, the length will be the product of its parameters(it has two parameters).
calloc fills the memory with ZERO's and returns a pointer to first byte. If it fails to locate enough space it
returns a NULL pointer.
malloc() allocates a memory area, length will be value entered as parameter.(it has one parameter). It does not
initializes memory area
free() used to free the allocated memory(allocated through calloc and malloc), in other words, this used
release the allocated memory
new also used to allocate memory on heap and initialize the memory using constructor
delete also used release memory allocated by new operator
24. Write output of the program?
int i=10;
printf("%d%d%d",i,++i,i++);
Answer = 10 12 12
25. What is virtual function and pure virtual function?
Virtual function:-To achieve polymorphism, function in base class is declared as virtual, by declare virtual we
make base class pointer to execute function of any derived class depends on content of pointer (any derived
class address).
Pure Virtual Function:-This is function used in base class, and its definition has to be providing in derived class.

Extreme Interview Questions

Recommended

More Related Content

What's hot (17)

Similar to Extreme Interview Questions (20)

More from Ehtisham Ali (20)

Recently uploaded (20)

Extreme Interview Questions