CSS Module 6 - Configure a DHCP Server

Jul 10, 20192 likes625 views

The document provides instructions for setting up DHCP in Windows Server 2008 R2. It describes adding the DHCP server role, binding it to a network connection, configuring DNS and scope settings, authorizing the server, and checking that DHCP is working by observing that a client receives an IP address from within the configured scope.

Computer Systems
Servicing NCII
Prepared by:
Kenji Fritz Y. Ando
Page 1 of 12
Set Up DHCP in Windows Server 2008 R2
1. Fire up the Server Manager, right click on roles, and then select add roles.
2. You will be prompted with the normal “Before You Begin” screen, and after
clicking Next you’ll be able to choose DHCP Server.

Computer Systems
Servicing NCII
Prepared by:
Kenji Fritz Y. Ando
Page 2 of 12
3. Next you’ll want to select the network connection to bind the DHCP protocol to.

Computer Systems
Servicing NCII
Prepared by:
Kenji Fritz Y. Ando
Page 3 of 12
4. On Specify IPv4 DNS Server Settings page, populate the Preferred DNS server
IPv4 address fields with the correct values.
5. Once specified, click Validate to confirm the availability of DNS server and click
“Next”.
6. On Specify IPv4 WINS Server Settings page, leave everything as default and
click “Next”.

Computer Systems
Servicing NCII
Prepared by:
Kenji Fritz Y. Ando
Page 4 of 12
7. On Add or Edit DHCP Scopes page, click Add.
8. On Add Scope box, populate the Scope name, Starting IP address, and Ending
IP address fields with the desired values and click OK.

Computer Systems
Servicing NCII
Prepared by:
Kenji Fritz Y. Ando
Page 5 of 12
9. Back on Add or Edit DHCP Scope page, click “Next”.
10.On Configure DHCPv6 Stateless Mode page, click “Disable DHCPv6” and click
“Next”.

Computer Systems
Servicing NCII
Prepared by:
Kenji Fritz Y. Ando
Page 6 of 12
11.On Authorize DHCP Server page, make sure that the Use current credentials
radio button is selected. Alternatively, Use alternate credentials radio button can
also be selected to specify the domain admin credentials that is to be allowed to
authorize DHCP server in AD DS.
12.The confirmation screen where you can finally click “Install”.

Computer Systems
Servicing NCII
Prepared by:
Kenji Fritz Y. Ando
Page 7 of 12
13.Once installed, click Close on the Installation Results page.

Computer Systems
Servicing NCII
Prepared by:
Kenji Fritz Y. Ando
Page 8 of 12
14.Close Server Manager window when done.
How to check if DCHP Server is working?
1. Go to the Network icon at the lower right, right click and Open Network and
Sharing Center.

Computer Systems
Servicing NCII
Prepared by:
Kenji Fritz Y. Ando
Page 9 of 12
2. Click “Local Area Connection”
3. Click “Properties”

Computer Systems
Servicing NCII
Prepared by:
Kenji Fritz Y. Ando
Page 10 of 12
4. Double click “Internet Protocol Version 4 (TCP/IPv4)”
5. From static address, click “Obtain an IP address automatically” and click “OK”.

Computer Systems
Servicing NCII
Prepared by:
Kenji Fritz Y. Ando
Page 11 of 12
6. Click “Details”

Computer Systems
Servicing NCII
Prepared by:
Kenji Fritz Y. Ando
Page 12 of 12
7. IP address should be within the range of the configured DHCP Scope.

- The document provides step-by-step instructions for setting up Active Directory on a Windows Server 2008 R2 server. It describes installing the Active Directory Domain Services role, promoting the server to a domain controller using the dcpromo.exe wizard, configuring a new forest and domain, and completing the initial configuration tasks. Key steps include assigning an IP address, installing the AD DS role, running dcpromo.exe to promote the server and create a new domain in a new forest, selecting options for the forest function level and DNS server, and rebooting the server once installation is complete.

COC 3 - Setup Computer SystemsDanilo Anos

The document provides step-by-step instructions for setting up a computer server including installing Active Directory Domain Services, DNS, DHCP, and file services. It also describes how to create user accounts, enable remote desktop access, set up folder redirection for desktop files, and apply a group policy for redirection. The overall process takes approximately 1.5 hours and allows multiple client computers to access shared files and settings hosted on the new computer server.

Bootable-USB.pptxDevineGraceValo2

This document provides step-by-step instructions for creating a bootable USB drive to install Windows Server 2016. It describes using Rufus to select the Windows Server 2016 installation files, format the USB drive, and copy additional application and driver files. The process takes 1-2 minutes to convert the USB drive to a bootable format. The user should then be able to restart their computer, access the boot menu, select the USB drive, and begin installing Windows Server 2016 onto their target system.

PPT CSS BOOTABLE DLL-DEMO.pptxReyYuy1

This document provides instructions for creating a bootable USB drive using Rufus software to install operating systems. It lists the steps to download and use Rufus, which is an open-source and easy to use software for creating bootable drives for Windows, Linux, and other operating systems. The instructions note to back up any files on the USB drive before using Rufus, as all data will be erased. The steps outlined to create the bootable drive using Rufus are to select the operating system, click start, and wait for the process to complete. References for further information on creating bootable drives are also provided.

Ict 9 module 3, lesson 2.5 basic computer configuration setupYonel Cadapan

The document discusses basic computer configuration setup and installing device drivers. It explains that configuration refers to how a system is set up, including both hardware and software components. It also describes the basic input/output system (BIOS) which is software stored on the motherboard that identifies hardware and performs basic functions like booting. The BIOS can be configured through the BIOS setup utility to change settings like boot order, date and time, and hardware settings. The document provides steps for determining a device manufacturer and obtaining the correct driver from sources like the manufacturer website in order to properly install and configure devices.

Splicing cable and testing cableMaestro Heraldo

1. The document provides instructions for splicing and testing network cables, including identifying the necessary tools and materials, preparing the cable by stripping the jacket and arranging the wire pairs, crimping the cable ends, and testing the cable for connectivity and quality. 2. Key steps include carefully removing the cable jacket, inspecting the wires for cuts, arranging the wires in the proper color order according to the TIA 568A or 568B standard, crimping the wires into RJ-45 plugs, and using a cable tester to check for cross-talk or connectivity issues. 3. Proper preparation and testing of the cables is important to ensure good performance and connectivity between network devices.

CSS L07 - Preparing the InstallerMarvin Bronoso

CSS LO7 - PREPARING THE INSTALLER LEARNING OUTCOME: AT THE END OF THIS LESSON THE LEARNERS WILL BE ABLE TO . . . 1. Prepare their usb bootable drive installer according to the manufacturer procedure. 2. Prepare their usb drive containing drivers and application software. 3. Learn and experience to install Window 7 operating system. 4. Discover and prepare the basic applications needed to be installed.

How to reformat pcBagumbayan National High School

Computers store data and operating instructions on hard disks. Formatting removes all data from these disks, which is often necessary due to virus infections or a full disk. The document provides step-by-step instructions to reformat a hard disk using a Windows XP CD, including backing up data, booting from the CD, deleting disk partitions, installing Windows to the unallocated space, and restoring backed-up data after completion.

How to prepare a portable bootable devicesiankeithsomoza

The document discusses how to prepare portable bootable devices such as USB installers. It lists three learning objectives: 1) discussing different methods for creating portable bootable devices, 2) performing the steps to create a USB installer, and 3) recognizing the importance of USB installers and portable bootable devices. The document provides information on how to create a bootable Windows 10 USB drive and how to create a Windows 10 UEFI boot media using the Media Creation Tool.

TLE 10 (ICT): Configuring a Wireless RouterRomne Ryan Portacion

A wireless router connects devices to the internet and each other via Wi-Fi. It has a WAN port to connect to a modem, LAN ports to connect devices via ethernet, and broadcasts a Wi-Fi signal for wireless connectivity. To set up the router, you connect it to the modem, access its management console via a web browser to configure settings like the Wi-Fi name and password, assign client IP addresses via DHCP, and activate the wireless functionality.

CBLM - Set Up Computer Network (CSS)Jean_SHS DepEd

The document provides information on configuring client device systems, which involves setting default preferences for devices connected to a network. It discusses configuring time and date, computer name, network drivers, and installing software applications. Specific steps are outlined for configuring client devices in Windows 7, 8, and 10 by setting the time and date, computer name, installing network drivers, and necessary software applications like MS Office and antivirus, in accordance with manufacturer instructions and user preferences.

Install network cable module CSS NC2wilfredo dela cerna

Setting up a networkRachel Espino

1) Setting up a home network requires a few basic pieces of hardware: a DSL or cable modem to connect to the internet, a wired or wireless router to connect devices on the network to the modem, and wired or wireless network adapters for devices to connect to the router. 2) A router connects devices on a home network and shares an internet connection from a modem. Devices connected to the router are given IP addresses to direct network traffic. 3) Important router specifications include wireless standard and throughput, wired throughput, range, number of ports, and wireless security settings. Choosing a router based on these specifications ensures optimal network performance and security.

How to install windows 7elboob2025

Here are two additional points about Windows 7 and common problems: - Windows 7 introduced Aero Snap, which allows users to easily resize windows and snap them to either side of the screen for multitasking. - A common problem some users encounter is that Windows updates may fail to download or install properly. This can sometimes be addressed by checking network connectivity and ensuring the Windows update components are up to date.

CSS NC II Module : Set-up Computer NetworksEric Talamisan

The document discusses setting up computer networks, including defining a network as a collection of connected computers and equipment. It describes the three basic types of networks - local area networks within a building, metropolitan area networks spanning a city, and wide area networks distributing information over thousands of miles. The key hardware components are identified as network interface cards that connect computers to the network via cables.

Cblm installing and configuring computer system and networksJulietcoronado

This document provides a competency-based learning material for the module "Installing and Configuring Computer Systems" which is part of the Computer System Servicing NC II qualification. The module aims to teach learners how to assemble computer hardware, install operating systems and device drivers, and install application software. It contains learning outcomes, assessment criteria, learning activities and resources to support competency development in installing and configuring computer systems.

INSTALL APLLICATION SOFTWARE.pptxkarmaYonten5

This presentation discusses installing application software. It defines software as programs that enable computers to perform specific tasks, whether system software like operating systems or application software for tasks like word processing. Application software examples are provided. There are trial versions with limited functionality and time limits, as well as licensed versions that are purchased. Software compatibility refers to different programs operating satisfactorily together on the same or linked computers. The presentation provides definitions of software and different types, as well as trial versus licensed versions and compatibility.

TLE ICT CSS 10 Information and task sheet 2.1 day 1Leonel Rivas

1. The document discusses different types of computer networks including personal area networks (PAN), local area networks (LAN), wireless local area networks (WLAN), campus area networks (CAN), metropolitan area networks (MAN), wide area networks (WAN), enterprise private networks (EPN), and virtual private networks (VPN). 2. It defines each network type based on its size and connection method, such as PAN being the smallest and revolving around one person, LAN connecting computers within a building, and WAN connecting computers across long distances globally through the internet. 3. The key differences between network types are their size and reach, from personal electronic devices on PANs, to campuses on CAN

Basic computer maintenancegeepatty

The document provides tips for basic computer maintenance including cleaning monitors, wires, CPUs, and other components. It recommends using surge protectors, opening and closing disk drives carefully, and cleaning keyboards, mice, and other inputs gently. The document also gives advice on installing software, protecting against viruses by avoiding suspicious emails and disks, using antivirus software and firewalls, and backing up data. General troubleshooting tips include checking power sources and restarting if the computer freezes or crashes.

Installing windows 10 and creating a bootable usbArsalan Qureshi

TLE ICT CSS 10 Cot lesson plan1Leonel Rivas

The document provides instructions for a lesson on installing the Windows 7 operating system. It outlines the objectives, standards, and procedures to follow. The lesson will involve a PowerPoint presentation defining key terms, a video demonstration of the installation steps, and an evaluation where students create their own video explaining how to install Windows 7 and are rated on content, video quality, and procedure accuracy. Students are also assigned to research installing device drivers as homework.

CSS Module 7 - Connect to another Computer using Remote Desktop Connectionkenjifritz

The document provides instructions for configuring remote desktop connections on both the client and server sides. On the client side, it describes allowing remote assistance connections, selecting remote desktop connection options, and inputting credentials to access the target computer desktop. On the server side, it similarly describes selecting remote desktop options and inputting credentials to access the target client desktop.

Computer diagnostics and repair - TLE ICT 10Leonel Rivas

1. The document provides information on diagnosing and solving common computer problems. It describes 5 example problems with symptoms, potential faulty devices, diagnostics, and solutions. 2. For each problem, it instructs the reader to write down the faulty device, diagnostic, and solution in a three column table. 3. The problems include a system with no power, a system where the monitor works but not the CPU, improper BIOS settings, a system where the monitor has no display, and a system unable to detect a boot device.

TLE ICT CSS 10 Weekly budget of lessonLeonel Rivas

This document outlines the weekly budget of lessons for a Computer Systems Servicing NC II course for Grade 10 students. Over the course of 4 weeks, students will learn about network designs and topologies, how to classify them, and how understanding these concepts impacts network interconnectivity. Students will also learn how to check network connectivity using commands like Ping, Netstat, and Ipconfig. They will watch instructional videos, install a terminal emulator on their phones, and practice using the commands to diagnose network issues. The goal is for students to understand how to set up computer networks based on procedures and hardware requirements and diagnose/repair any problems in the network system.

Computer hardware troubleshootingJerome Luison

The document provides guidance on basic computer troubleshooting, including checking connections, rebooting the computer, documenting error messages, and identifying recent changes that could be causing issues. It also includes tips for troubleshooting issues with new monitors, motherboards, hard drives, and other hardware. Common beep codes and their meanings are listed to help diagnose potential problems.

Final Demo Semi Detailed Lesson Plan in TLE 2 (LAN Cabling)Manila Central University

Computer system servicingLindyl Geral

This course is designed to develop the knowledge, skills, and attitudes of a Computer Service Technician according to industry standards, covering topics such as installing, maintaining, configuring, diagnosing computer systems and networks. The course also focuses on workplace communication, teamwork, professionalism, health and safety, and includes hands-on training in installing, troubleshooting, configuring and maintaining computer systems and networks.

CSS L05 - Computer System AssemblyMarvin Bronoso

The document provides step-by-step instructions for assembling a computer system. It discusses 11 steps: installing the CPU; heat sink and fan; RAM; motherboard; power supply; hard drive; optical drive; expansion cards; cables; checking and testing; and installing the operating system and drivers. The goal is to learn how to properly assemble internal computer hardware and install an operating system.

Installation of Windows Server 2003 Domain Controller and DNS Server Setup► Supreme Mandal ◄

Ad installationJess Joseph

Active Directory provides centralized network management and storage of network resources. To configure a Windows Server 2008 machine as a domain controller, several prerequisites must be met and steps followed, including installing the Active Directory Domain Services role, running DCPROMO to promote the server, and rebooting. The document then outlines considerations for installing a new Active Directory forest or domain, and the specific steps to configure the server with a static IP, set the system name, install AD DS, and run DCPROMO to promote the server and install Active Directory.

More Related Content

What's hot (20)

How to prepare a portable bootable devicesiankeithsomoza

TLE 10 (ICT): Configuring a Wireless RouterRomne Ryan Portacion

CBLM - Set Up Computer Network (CSS)Jean_SHS DepEd

Install network cable module CSS NC2wilfredo dela cerna

Setting up a networkRachel Espino

How to install windows 7elboob2025

CSS NC II Module : Set-up Computer NetworksEric Talamisan

Cblm installing and configuring computer system and networksJulietcoronado

INSTALL APLLICATION SOFTWARE.pptxkarmaYonten5

TLE ICT CSS 10 Information and task sheet 2.1 day 1Leonel Rivas

Basic computer maintenancegeepatty

Installing windows 10 and creating a bootable usbArsalan Qureshi

TLE ICT CSS 10 Cot lesson plan1Leonel Rivas

CSS Module 7 - Connect to another Computer using Remote Desktop Connectionkenjifritz

Computer diagnostics and repair - TLE ICT 10Leonel Rivas

TLE ICT CSS 10 Weekly budget of lessonLeonel Rivas

Computer hardware troubleshootingJerome Luison

Final Demo Semi Detailed Lesson Plan in TLE 2 (LAN Cabling)Manila Central University

Computer system servicingLindyl Geral

CSS L05 - Computer System AssemblyMarvin Bronoso

How to prepare a portable bootable devicesiankeithsomoza

TLE 10 (ICT): Configuring a Wireless RouterRomne Ryan Portacion

CBLM - Set Up Computer Network (CSS)Jean_SHS DepEd

Install network cable module CSS NC2wilfredo dela cerna

Setting up a networkRachel Espino

How to install windows 7elboob2025

CSS NC II Module : Set-up Computer NetworksEric Talamisan

Cblm installing and configuring computer system and networksJulietcoronado

INSTALL APLLICATION SOFTWARE.pptxkarmaYonten5

TLE ICT CSS 10 Information and task sheet 2.1 day 1Leonel Rivas

Basic computer maintenancegeepatty

Installing windows 10 and creating a bootable usbArsalan Qureshi

TLE ICT CSS 10 Cot lesson plan1Leonel Rivas

CSS Module 7 - Connect to another Computer using Remote Desktop Connectionkenjifritz

Computer diagnostics and repair - TLE ICT 10Leonel Rivas

TLE ICT CSS 10 Weekly budget of lessonLeonel Rivas

Computer hardware troubleshootingJerome Luison

Final Demo Semi Detailed Lesson Plan in TLE 2 (LAN Cabling)Manila Central University

Computer system servicingLindyl Geral

CSS L05 - Computer System AssemblyMarvin Bronoso

Similar to CSS Module 6 - Configure a DHCP Server (20)

Installation of Windows Server 2003 Domain Controller and DNS Server Setup► Supreme Mandal ◄

Ad installationJess Joseph

Dhcp server and windows 2012HEM Sothon

- DHCP allows network administrators to centrally manage and automate the assignment of IP configurations to devices on a network. The DHCP server provides clients with an IP address, subnet mask, and default gateway. - To install a DHCP server on Windows Server 2012, an administrator selects the DHCP server role, configures authorization for the DHCP service, and restarts the service. - The advantages of DHCP include centralized IP management, automatic client configuration, support for various client types, and elimination of duplicate IP addresses. The disadvantages include potential security issues, single points of failure, and additional configuration requirements for multi-segment networks.

Step by step guide for setting up windows server 2012 domain controllerRavi Kumar Lanke

This document provides step-by-step instructions for setting up a Windows Server 2012 domain controller. It describes changing the server name and IP address, installing the Active Directory Domain Services role, promoting the server to a domain controller to create a new AD forest called "ArabITPro.local", specifying configuration options like DNS settings and passwords, and verifying prerequisites are met before installation completes and the server restarts.

Dhcp, dns and proxy server (1)Sahira Khan

Install and Configure DHCP role on Windows Server 2012abdualziz-aljohani

This document provides instructions for installing and configuring DHCP server role on Windows Server 2012 and setting up a DHCP failover scope for high availability. It describes steps to install the DHCP role, complete post-installation configuration, authorize the DHCP server, configure an IP address scope, set up failover between two servers for the scope, and verify the failover configuration. Figures and screenshots are referenced to illustrate the interface.

2. install oskris harden

1. The document provides instructions for installing Windows Server 2008, including hardware requirements, installation media requirements, and a 14-step installation process. 2. Key steps in the installation process include selecting installation options, accepting license terms, selecting disk and partition, and changing the default administrator password. 3. The installation takes approximately 20 minutes to copy and extract files, then the server will reboot for initial configuration.

3.3_-_Lecture_3_Installing_the_DNS_Server_Role.pdfssuserfd0132

This document provides instructions for installing and configuring the DNS server role in a Windows 2016 server environment. It discusses best practices like using strong passwords and installing security updates. It then provides step-by-step directions for installing the DNS role using the Add Roles and Features Wizard in Server Manager. Some key configuration steps include assigning static IP addresses to server network cards and configuring DNS server properties like IP address, subnet mask, default gateway and preferred/alternate DNS servers. Finally, it confirms the DNS role installation is complete and DNS Manager can be used to further configure the new DNS server.

Blue Gradient Modern Illustration Computer Presentation.pdf.pdfvuiiwhwudh

How to install windows server 2008Ravi Kumar Lanke

Windows Server 2008 R2 builds on Windows Server 2008 with new virtualization, management, and integration tools. It provides greater control, efficiency, and ability to respond to business needs. The document then outlines an 18 step process for installing Windows Server 2008, which includes inserting the installation media, selecting options, accepting licenses, installing to a hard disk, setting the administrator password, and initial configuration.

SOP - 2013 Server BuildRobert Jones

This document provides a checklist for building an MS Windows Server 2008 machine. It outlines 14 high-level steps: 1) Prepare required paperwork; 2) Configure hardware or virtual machine; 3) Prepare the server environment; 4) Install Windows Server OS; 5) Customize the desktop and power settings; 6) Configure core server settings; 7) Install necessary agents and add-ons; and 8) Mark the build complete upon installing required VMware or hardware tools. It also provides additional pages of detailed instructions for each step.

Microsoft Lync Server 2010 InstallationShahab Al Yamin Chawdhury

Installation of Active Directory on Windows Server 2003 Server► Supreme Mandal ◄

The document provides instructions for installing Active Directory on a Windows 2003 Server. It outlines configuring the server name and IP address, installing DNS services, creating DNS zones, and running the DCPROMO utility to promote the server to a domain controller. The summary checks the installation, including verifying Active Directory tools are installed, the required OUs exist, and the server is listed in the sites and services. It also checks DNS for the required SRV records and ensures files are present in the NTDS and SYSVOL folders.

CSS Module 2 - Setting IP Addresskenjifritz

The 7-page document provides instructions for setting up IP addresses and configuring the firewall settings for a server and client computer. It includes specifying static IP addresses, subnet masks, default gateways and DNS servers for both computers. The steps also describe using the ping command to test connectivity and troubleshooting firewall issues that could cause timeout errors. Configuring the firewall to allow connectivity between the server and client computers is necessary to proceed with further network activities.

Understanding Windows Azure’s Active Directory (AD) and PowerShell ToolsEPC Group

Understanding Windows Azure’s Active Directory (AD) and PowerShell Tools Web: www.epcgroup.net | E-mail: [email protected] | Phone: (888) 381-9725 | Twitter: @epcgroup * SharePoint Server 2013, Office 365, Windows Azure, Amazon Web Services (AWS), SharePoint Server 2010 & SharePoint 2007: Review, Architecture Development, Planning, Configuration & Implementations, Upgrades, Global Initiatives, Training, and Post Go-live Support with Extensive Knowledge Transfer | Custom Branding and Responsive Web Design (RWD) * Health Check & Assessments (Roadmap Preparation to Upgrade to 2013 or 2010) - Including Custom Code & Solution Review * Enterprise Content Management Systems based on Microsoft SharePoint 2013, Office 365 Hybrid Cloud (Both On-premises and cloud) * Enterprise Metadata Design, Taxonomy | Retention Schedule Dev | Disposition Workflow, and Records Management | eDiscovery | Microsoft Exchange 2013 Migration \ Integration | Roadmap, Requirements Gathering, Planning, Designing & Performing the Actual Implementation * Best Practices Consulting on SharePoint 2013, Office 365, SharePoint 2010, 2007 | EPC Group has completed over 900+ initiatives * Intranet, Knowledge Management, Internet & Extranet-Facing as Well as Mobility (BYOD Roadmap), Cloud, Hybrid, and Cross-Browser | Cross-Platform Solutions for SharePoint 2013 with Proven Past-performance *Upgrades or Migrations of Existing Deployments or Other LOB Systems (Documentum, LiveLink, FileNet, SAP, etc.) * Custom Apps, Custom Application Development, Custom Feature, Master Pages, Web Parts, Security Model, Usability (UI) & Workflow Development (Visual Studio 2012, Visual Studio 2013) * Migration Initiatives to SharePoint 2013 \ Office 365 and those organizations with both on-premises and cloud assets for a SharePoint Hybrid Architecture and Deployment * Key Performance Indicators, Dashboard & Business Intelligence Reporting Solutions (PerformancePoint 2013, SQL Server 2012 R2, SQL Server 2014, BI, KPIs, PowerPivot, Scorecards, Big Data) and Power BI * Experts in Global \ Enterprise Infrastructure, Security, Hardware Configuration & Disaster Recovery (Global performance considerations) * Tailored SharePoint "in the trenches" Training on SharePoint 2013, 2010, 2007 + Office 365 * Support Contracts (Ongoing Support your Organization's 2013, 2010, or 2007 Implementations) * .NET Development, Custom applications, BizTalk Server experts * Project Server 2013, 2010, and 2007 Implementations * SharePoint Roadmap & Governance Development: 6, 12, 18, 24 and 36 months (Steering Committee & Code Review Board Development) * EPC Group's HybridCloudAdvisor.com - Navigating the Ever Changing World of the Hybrid Cloud to include SLA development & consulting services | advisory | best practices around PaaS, IaaS, SaaS, VDI, Windows Azure, AWS as well as security, compliance & and regulatory

Installation of Active Directory on Windows 2000 Server► Supreme Mandal ◄

DNS Cache White PaperRyan Ellingson

1. The document discusses DNS cache poisoning using a man-in-the-middle attack. It provides details on setting up the attack using Kali Linux, Windows Server 2008, and Windows 7. It clones the Facebook website and poisons the DNS cache so traffic is redirected to the fake site. 2. Testing confirms the attack was successful when pinging the fake Facebook site returns the IP of the Kali machine for both Windows systems. The document also proposes short and long-term solutions to prevent DNS cache poisoning attacks, such as disabling open recursive name servers and implementing DNSSEC. 3. In conclusion, the document notes that while DNS cache poisoning is easy to setup, protection requires more effort but is still important for network

Windows Deployment Services TutorialTravis Kench

Windows Server 2012 Installation and Configurtion SuperiorgrwAwais Amjad

Installation of Windows Server 2003 Domain Controller and DNS Server Setup► Supreme Mandal ◄

Ad installationJess Joseph

Dhcp server and windows 2012HEM Sothon

Step by step guide for setting up windows server 2012 domain controllerRavi Kumar Lanke

Dhcp, dns and proxy server (1)Sahira Khan

Install and Configure DHCP role on Windows Server 2012abdualziz-aljohani

2. install oskris harden

3.3_-_Lecture_3_Installing_the_DNS_Server_Role.pdfssuserfd0132

Blue Gradient Modern Illustration Computer Presentation.pdf.pdfvuiiwhwudh

How to install windows server 2008Ravi Kumar Lanke

SOP - 2013 Server BuildRobert Jones

Microsoft Lync Server 2010 InstallationShahab Al Yamin Chawdhury

Installation of Active Directory on Windows Server 2003 Server► Supreme Mandal ◄

CSS Module 2 - Setting IP Addresskenjifritz

Understanding Windows Azure’s Active Directory (AD) and PowerShell ToolsEPC Group

Installation of Active Directory on Windows 2000 Server► Supreme Mandal ◄

DNS Cache White PaperRyan Ellingson

Windows Deployment Services TutorialTravis Kench

Windows Server 2012 Installation and Configurtion SuperiorgrwAwais Amjad

Recently uploaded (20)

Studying Drama: Definition, types and elementsAbdelFattahAdel2

Presentation on Tourism Product Development By Md Shaifullar RabbiMd Shaifullar Rabbi

Open Access: Revamping Library Learning Resources.Rishi Bankim Chandra Evening College, Naihati, North 24 Parganas, West Bengal, India

Dr. Santosh Kumar Tunga discussed an overview of the availability and the use of Open Educational Resources (OER) and its related various issues for various stakeholders in higher educational Institutions. Dr. Tunga described the concept of open access initiatives, open learning resources, creative commons licensing attribution, and copyright. Dr. Tunga also explained the various types of OER, INFLIBNET & NMEICT initiatives in India and the role of academic librarians regarding the use of OER.

YSPH VMOC Special Report - Measles Outbreak Southwest US 4-26-2025.pptxYale School of Public Health - The Virtual Medical Operations Center (VMOC)

A measles outbreak originating in West Texas has been linked to confirmed cases in New Mexico, with additional cases reported in Oklahoma and Kansas. The current case count is 771 from Texas, New Mexico, Oklahoma, and Kansas. 72 individuals have required hospitalization, and 3 deaths, 2 children in Texas and one adult in New Mexico. These fatalities mark the first measles-related deaths in the United States since 2015 and the first pediatric measles death since 2003. The YSPH Virtual Medical Operations Center Briefs (VMOC) were created as a service-learning project by faculty and graduate students at the Yale School of Public Health in response to the 2010 Haiti Earthquake. Each year, the VMOC Briefs are produced by students enrolled in Environmental Health Science Course 581 - Public Health Emergencies: Disaster Planning and Response. These briefs compile diverse information sources – including status reports, maps, news articles, and web content– into a single, easily digestible document that can be widely shared and used interactively. Key features of this report include: - Comprehensive Overview: Provides situation updates, maps, relevant news, and web resources. - Accessibility: Designed for easy reading, wide distribution, and interactive use. - Collaboration: The “unlocked" format enables other responders to share, copy, and adapt seamlessly. The students learn by doing, quickly discovering how and where to find critical information and presenting it in an easily understood manner.

P-glycoprotein pamphlet: iteration 4 of 4 finalbs22n2s

Introduction to Vibe Coding and Vibe EngineeringDamian T. Gordon

Presentation of the MIPLM subject matter expert Erdem KayaMIPLM

How to track Cost and Revenue using Analytic Accounts in odoo Accounting, App...Celine George

Analytic accounts are used to track and manage financial transactions related to specific projects, departments, or business units. They provide detailed insights into costs and revenues at a granular level, independent of the main accounting system. This helps to better understand profitability, performance, and resource allocation, making it easier to make informed financial decisions and strategic planning.

Exploring-Substances-Acidic-Basic-and-Neutral.pdfSandeep Swamy

Exploring Substances: Acidic, Basic, and Neutral Welcome to the fascinating world of acids and bases! Join siblings Ashwin and Keerthi as they explore the colorful world of substances at their school's National Science Day fair. Their adventure begins with a mysterious white paper that reveals hidden messages when sprayed with a special liquid. In this presentation, we'll discover how different substances can be classified as acidic, basic, or neutral. We'll explore natural indicators like litmus, red rose extract, and turmeric that help us identify these substances through color changes. We'll also learn about neutralization reactions and their applications in our daily lives. by sandeep swamy

K12 Tableau Tuesday - Algebra Equity and Access in Atlanta Public Schoolsdogden2

Algebra 1 is often described as a “gateway” class, a pivotal moment that can shape the rest of a student’s K–12 education. Early access is key: successfully completing Algebra 1 in middle school allows students to complete advanced math and science coursework in high school, which research shows lead to higher wages and lower rates of unemployment in adulthood. Learn how The Atlanta Public Schools is using their data to create a more equitable enrollment in middle school Algebra classes.

LDMMIA Reiki Master Spring 2025 Mini UpdatesLDM Mia eStudios

Multi-currency in odoo accounting and Update exchange rates automatically in ...Celine George

Unit 5: Dividend Decisions and its theoriesbharath321164

To study the nervous system of insect.pptxArshad Shaikh

The *nervous system of insects* is a complex network of nerve cells (neurons) and supporting cells that process and transmit information. Here's an overview: Structure 1. *Brain*: The insect brain is a complex structure that processes sensory information, controls behavior, and integrates information. 2. *Ventral nerve cord*: A chain of ganglia (nerve clusters) that runs along the insect's body, controlling movement and sensory processing. 3. *Peripheral nervous system*: Nerves that connect the central nervous system to sensory organs and muscles. Functions 1. *Sensory processing*: Insects can detect and respond to various stimuli, such as light, sound, touch, taste, and smell. 2. *Motor control*: The nervous system controls movement, including walking, flying, and feeding. 3. *Behavioral responThe *nervous system of insects* is a complex network of nerve cells (neurons) and supporting cells that process and transmit information. Here's an overview: Structure 1. *Brain*: The insect brain is a complex structure that processes sensory information, controls behavior, and integrates information. 2. *Ventral nerve cord*: A chain of ganglia (nerve clusters) that runs along the insect's body, controlling movement and sensory processing. 3. *Peripheral nervous system*: Nerves that connect the central nervous system to sensory organs and muscles. Functions 1. *Sensory processing*: Insects can detect and respond to various stimuli, such as light, sound, touch, taste, and smell. 2. *Motor control*: The nervous system controls movement, including walking, flying, and feeding. 3. *Behavioral responses*: Insects can exhibit complex behaviors, such as mating, foraging, and social interactions. Characteristics 1. *Decentralized*: Insect nervous systems have some autonomy in different body parts. 2. *Specialized*: Different parts of the nervous system are specialized for specific functions. 3. *Efficient*: Insect nervous systems are highly efficient, allowing for rapid processing and response to stimuli. The insect nervous system is a remarkable example of evolutionary adaptation, enabling insects to thrive in diverse environments. The insect nervous system is a remarkable example of evolutionary adaptation, enabling insects to thrive

World war-1(Causes & impacts at a glance) PPT by Simanchala Sarab(BABed,sem-4...larencebapu132

How to Customize Your Financial Reports & Tax Reports With Odoo 17 AccountingCeline George

Handling Multiple Choice Responses: Fortune Effiong.pptxAuthorAIDNationalRes

The ever evoilving world of science /7th class science curiosity /samyans aca...Sandeep Swamy

The Ever-Evolving World of Science Welcome to Grade 7 Science4not just a textbook with facts, but an invitation to question, experiment, and explore the beautiful world we live in. From tiny cells inside a leaf to the movement of celestial bodies, from household materials to underground water flows, this journey will challenge your thinking and expand your knowledge. Notice something special about this book? The page numbers follow the playful flight of a butterfly and a soaring paper plane! Just as these objects take flight, learning soars when curiosity leads the way. Simple observations, like paper planes, have inspired scientific explorations throughout history.

How to Subscribe Newsletter From Odoo 18 WebsiteCeline George

Geography Sem II Unit 1C Correlation of Geography with other school subjectsProfDrShaikhImran

Studying Drama: Definition, types and elementsAbdelFattahAdel2

Presentation on Tourism Product Development By Md Shaifullar RabbiMd Shaifullar Rabbi

Open Access: Revamping Library Learning Resources.Rishi Bankim Chandra Evening College, Naihati, North 24 Parganas, West Bengal, India

YSPH VMOC Special Report - Measles Outbreak Southwest US 4-26-2025.pptxYale School of Public Health - The Virtual Medical Operations Center (VMOC)

P-glycoprotein pamphlet: iteration 4 of 4 finalbs22n2s

Introduction to Vibe Coding and Vibe EngineeringDamian T. Gordon

Presentation of the MIPLM subject matter expert Erdem KayaMIPLM

How to track Cost and Revenue using Analytic Accounts in odoo Accounting, App...Celine George

Exploring-Substances-Acidic-Basic-and-Neutral.pdfSandeep Swamy

K12 Tableau Tuesday - Algebra Equity and Access in Atlanta Public Schoolsdogden2

LDMMIA Reiki Master Spring 2025 Mini UpdatesLDM Mia eStudios

Multi-currency in odoo accounting and Update exchange rates automatically in ...Celine George

Unit 5: Dividend Decisions and its theoriesbharath321164

To study the nervous system of insect.pptxArshad Shaikh

World war-1(Causes & impacts at a glance) PPT by Simanchala Sarab(BABed,sem-4...larencebapu132

How to Customize Your Financial Reports & Tax Reports With Odoo 17 AccountingCeline George

Handling Multiple Choice Responses: Fortune Effiong.pptxAuthorAIDNationalRes

The ever evoilving world of science /7th class science curiosity /samyans aca...Sandeep Swamy

How to Subscribe Newsletter From Odoo 18 WebsiteCeline George

Geography Sem II Unit 1C Correlation of Geography with other school subjectsProfDrShaikhImran

CSS Module 6 - Configure a DHCP Server

1. Computer Systems Servicing NCII Prepared by: Kenji Fritz Y. Ando Page 1 of 12 Set Up DHCP in Windows Server 2008 R2 1. Fire up the Server Manager, right click on roles, and then select add roles. 2. You will be prompted with the normal “Before You Begin” screen, and after clicking Next you’ll be able to choose DHCP Server.

2. Computer Systems Servicing NCII Prepared by: Kenji Fritz Y. Ando Page 2 of 12 3. Next you’ll want to select the network connection to bind the DHCP protocol to.

3. Computer Systems Servicing NCII Prepared by: Kenji Fritz Y. Ando Page 3 of 12 4. On Specify IPv4 DNS Server Settings page, populate the Preferred DNS server IPv4 address fields with the correct values. 5. Once specified, click Validate to confirm the availability of DNS server and click “Next”. 6. On Specify IPv4 WINS Server Settings page, leave everything as default and click “Next”.

4. Computer Systems Servicing NCII Prepared by: Kenji Fritz Y. Ando Page 4 of 12 7. On Add or Edit DHCP Scopes page, click Add. 8. On Add Scope box, populate the Scope name, Starting IP address, and Ending IP address fields with the desired values and click OK.

5. Computer Systems Servicing NCII Prepared by: Kenji Fritz Y. Ando Page 5 of 12 9. Back on Add or Edit DHCP Scope page, click “Next”. 10.On Configure DHCPv6 Stateless Mode page, click “Disable DHCPv6” and click “Next”.

6. Computer Systems Servicing NCII Prepared by: Kenji Fritz Y. Ando Page 6 of 12 11.On Authorize DHCP Server page, make sure that the Use current credentials radio button is selected. Alternatively, Use alternate credentials radio button can also be selected to specify the domain admin credentials that is to be allowed to authorize DHCP server in AD DS. 12.The confirmation screen where you can finally click “Install”.

7. Computer Systems Servicing NCII Prepared by: Kenji Fritz Y. Ando Page 7 of 12 13.Once installed, click Close on the Installation Results page.

8. Computer Systems Servicing NCII Prepared by: Kenji Fritz Y. Ando Page 8 of 12 14.Close Server Manager window when done. How to check if DCHP Server is working? 1. Go to the Network icon at the lower right, right click and Open Network and Sharing Center.

9. Computer Systems Servicing NCII Prepared by: Kenji Fritz Y. Ando Page 9 of 12 2. Click “Local Area Connection” 3. Click “Properties”

10. Computer Systems Servicing NCII Prepared by: Kenji Fritz Y. Ando Page 10 of 12 4. Double click “Internet Protocol Version 4 (TCP/IPv4)” 5. From static address, click “Obtain an IP address automatically” and click “OK”.

11. Computer Systems Servicing NCII Prepared by: Kenji Fritz Y. Ando Page 11 of 12 6. Click “Details”

12. Computer Systems Servicing NCII Prepared by: Kenji Fritz Y. Ando Page 12 of 12 7. IP address should be within the range of the configured DHCP Scope.

CSS Module 6 - Configure a DHCP Server

Recommended

More Related Content

What's hot (20)

Similar to CSS Module 6 - Configure a DHCP Server (20)

Recently uploaded (20)

CSS Module 6 - Configure a DHCP Server