12 1-man-operation center-ug(2)

Oracle® Manufacturing Operations Center Release 12.1 August 2010
Structure
1 Overview
2 Setup Steps
3 Administrator Role
4 User Role
5 Manufacturing Operations Center Catalog
6 Plant Manager Dashboard
7 Facilities Manager Dashboard
8 MOC and Oracle Enterprise Asset Management (eAM) Integration
9 Ad hoc Reports
A Navigation
B Error Management
Glossary
Overview of Oracle Manufacturing Operations Center
Oracle Manufacturing Operations Center (MOC) is a prebuilt, flexible, and
extensible solution that improves your plant performance by collecting
data from disparate plant floor systems, contextualizing them with
business context, and provides real-time intelligence on plant floor
operations. Oracle Manufacturing Operations Center is the foundation for
continuous improvement. Key components of this application include:
• A data model based on ISA-95 industry standard and extensible attribute
framework.
• Pre-built extensible adapters for Oracle EBS.
• A robust contextualization rules engine to convert raw shop floor data
into meaningful business information.
• Pre-built key performance indicators and analytics, delivered in
Oracle's industry leading, easy to configure and extend Business
Intelligence (BI) technology.
• Ability to monitor production performance in real time. Oracle
Manufacturing Operations Center provides new capabilities to drive
sustainability initiatives. Sustainability Aspect is a generic name used
for continuous inputs consumed by companies to be able to operate and
create goods or services. Common examples of sustainability aspects are
electricity, gas, oil, water, helium etc.
1

The Sustainability Sensor Data Management system of Oracle MOC helps you
meet the legislative requirements and social responsibilities to go green
and accelerate sustainability improvements of companies focusing on
manufacturing, innovation, or services, and enables you to:
• Monitor and analyze energy consumption, energy cost, and carbon
emissions with dashboards and built-in key performance indicators (KPIs),
leveraged by Oracle Business Intelligence Enterprise Edition (OBIEE)
technology.
• Integrate with smart meters, environmental management systems.
• Build automation systems and collect energy consumption and emissions
data.
• Identify specific opportunities for improving energy efficiency and
reduction in carbon emissions.
• Normalize and correlate energy consumption to operating conditions and
production variables, and enable energy-aware manufacturing.
• Leverage as a certifiable data repository for energy usage reporting
based on Global Reporting Initiative (GRI) framework and Green House Gas
(GHG) protocol.
Setup Steps
Setting Up Manufacturing Operations Center
The Oracle Manufacturing Operations Center (MOC) setup steps span several
Oracle
systems including Oracle Business Intelligence Enterprise Edition
(OBIEE), Oracle
Warehouse Builder (OWB), and the MOC setup pages:
•
OBIEE provides analytics from data spanning enterprise sources and
applications.
•
OWB provides data extraction, and transformation and loading from source
systems into the MOC environment.
•
The MOC Administrator role is used to setup Sustainability Aspect,
Emission
Factors, Tags, Meters, Entity Hierarchy, and setup contextualization
methods for
business context, and create and associate attribute groups and attribute
data
entities. It can also be used to create meters, run concurrent program to
process
meter readings, and use extensible attributes workbench to setup
classifications and
attributes for user-defined attributes.
•
The User role is used to view and integrate data collection, and perform
analytic
reporting. User can use extensible attributes workbench to create
attributes and

attribute groups, and associate them with classifications.
The following chart lists the setup steps for Oracle Manufacturing Center
Operations.
Some steps are required, others are optional, depending upon other
functions in your
environment:
1

1. Source Systems Setup
Source system definitions are set up to load data from different source
systems.
2. Site Setup
Site definitions are set up and mapped to source organizations in
different systems.
3. Sustainability Aspect Setup
Sustainability Aspect is a generic name used for continuous inputs
consumed by
companies in order to be able to operate and create goods or services.
Common
examples of sustainability aspect are electricity, gas, oil, water,
helium etc.
Sustainability aspects always have associated costs for companies and are
often
source of harmful emissions to environment. Companies usually monitor
consumption of sustainability aspects and make efforts to minimize them
for
efficiency and environmental concerns. Setting up sustainability aspect
refers to
defining energy, usage categories, and emissions.
2-2

4. Site Sustainability Setup
Setting up sustainability aspect for a site by defining energy sources,
planned
energy usage, cost, and emission factors. You must perform this setup to
populate
sustainability aspect for any entity belonging to the site.
5. Time Dimension Setup
Define time dimensions including calendars and workday shifts. You can
analyze
data for different hierarchies for time dimension.
6. Item Dimension Setup
Define item dimensions. You can analyze items by different hierarchies.
Three item
hierarchies are seeded, and any number of hierarchies can be built and
analyzed.
Item hierarchy supports ten levels.
7. Equipment Dimension Setup
Define equipment dimensions. You can build multiple hierarchies for
equipment,
and these can be rolled up using different hierarchies for reporting.
Five seeded
hierarchies are provided, and ten hierarchy levels are supported. Any
number of
equipment hierarchies can be built and analyzed.
8. Data Collection Setup
This task involves setting the profile option MTH: System Global Name in
the
source EBS system for collecting data from E-Business Suite applications
master
data. This data includes item and item hierarchies, resource and resource
hierarchies, and shift definition. Reference data is also collected for
production
schedules and material produced, item and resource costs, and sale order
lines
pegged to work orders. Set up Oracle Warehouse Builder to load data using
Microsoft Excel templates from other source systems into the MOC staging
tables.

Administrator Role
Overview of the Administrator Role
The MOC Administrator role is used to setup and maintain master data for
the
Manufacturing Operations Center application. It is also used to calculate
meter readings
and sustainability consumption. Following is a brief overview of the
tasks under this
role:
•
Contextualization setup: Used to setup contextualization method for
equipment.
•
Tag setup: Used to associate tags to equipment and MOC entities, and
define rules
for adding the business context through the contextualization setup.
•
Sustainability aspect setup: Used to setup sustainability aspect and its
corresponding usage categories and emission codes.
•
Site setup: Used to setup site.
•
Site sustainability setup: Used to setup the association of site to
sustainability aspect
and define the sustainability aspect sources and emission factors.
•
Equipment setup: Used to setup equipments.
•
Tag equipment mapping setup: Used to associate tags to equipment.
•
Resource setup: Used to setup resources.
•
User-defined entities setup: Used to setup user defined entities.
•
Shift setup: Used to create shift templates and generate shifts for site
and its entities.
•
Hierarchy setup: Used to setup and build hierarchy.
•
Meter setup: Used to setup meters.
1

Setting Up Tags
A tag is the metadata configured in PLC or other device connector
providing data at the
program interval. MOC requires specific tags for obtaining the operation
details and
business context. There are two types of tags. Business context tags
provide work order,
operation, product, and equipment details. Data tags provide value of
output, scrap,
rework, quantity, and completed quantity.
Tag metadata is imported into MOC through Oracle Warehouse Builder
mapping by
loading data from the comma-separated values (csv) templates.
To define tag data information:
1.
Navigate to the Tag Setup page. If you have already imported the tag
metadata
using the csv template, then they display on this page.
2. To add a new Tag Data Source, Click Add Source.
3. Enter the name of the new tag data source in the Tag Data Source
field.

4. Select the Type of the tag. Options are Operation and Sustainability.
5.
Select the System for the tag. The list of Source Systems that you set up
while
setting up the MOC application display in the list of values for this
field. Refer to
the "Setting Up Source Systems" chapter of the Oracle Manufacturing
Operations
Systems Implementation Guide for more information.
6.
Save your work.
To add tags to a tag data source:
1.
Select a Tag Data Source to which you want to add tags.
2.
Click Add.
3.
Enter the following information for a tag:
•
Tag Code is the code for the tag.
•
Tag is the name of the tag.
•
Description is a brief description of the tag.
4.
Select the Data Type for the tag. Options are Alphanumeric and Numeric.
Numeric
displays by default.
5.
Select the Reading Type for the tag. Options are Cumulative and
Incremental.
Cumulative displays by default.
6.
Select the Order in which the readings for the tag are recorded. Options
are
Ascending and Descending. This field is enabled only if you select
Cumulative as
3

the Reading Type. If you select Cumulative as the Reading Type, then
Ascending
displays by default.
7.
Enter a Reset Value. Reset Value is the value at which the tag reading
recording
must be reset. This field is enabled only if you select Cumulative as the
Reading
Type.
8.
Enter an Initial Value. Initial Value is the starting value that you
expect to receive
from a tag meter recording. This field is enabled only if you select
Cumulative as
the Reading Type. Zero is the default value.
9.
Enter a Reading Interval (in minutes) as the time interval at which the
tag readings
must be recorded. You can enter a reading interval only for a tag of the
sustainability type tag data source.
10.
Status displays as Active by default. To inactive a tag, click
Inactivate.
11.
Click Save.
Note: A tag can be associated to an equipment record only once,
but can be associated to multiple equipment.
To update a tag:
1.
Select a tag.
2.
Click Update. Edit the following fields:
•
Tag
•
Description
•
Reading Type
•
Order. This field is enabled for a Cumulative reading type tag only.
•
Reset Value. This field is enabled for a Cumulative reading type tag
only.
3-4

•
Initial Value. This field is enabled for a Cumulative reading type tag
only.
•
Reading Interval. This field is enabled for Incremental reading type tag
of a
Sustainability type tag data source.
3.
Click Save.
Mapping Tags to Equipment
Oracle Manufacturing Operations Center enables you to map tags to
equipment using
the Tag Mapping page. You map a separate tag for each equipment output.
To map tags to equipment:
1.
Navigate to the Tag Mapping page.
2.
Select the Site Name. All the Sites defined in the MOC application
display in the list
of values (LOV).
3.
Select Equipment Name of the equipment to which you want to map tags.
4.
Click Go. If tags are already mapped to the selected equipment, then they
display.
5.
Click Add to map a tag.
6.
Enter the Tag Code that you want to map to the equipment. All the tags in
the Tag
Master display in the LOV. This is a required field.
7.
Optionally, enter a Data Element for the tag.
8.
Optionally, enter Attribute Group Name and Attribute Name. You can choose
from
a list of attribute groups and attributes that you define using the
Extensible
Attributes page as part of setting up the MOC application. Refer to the
topic "
Setting Up Extensible Attributes" chapter of the Oracle Manufacturing
Operations
Implementation Guide for more information.
9.
Click Submit.
5

Note: You can associate a tag to either to an entity or an attribute
belonging to an attribute group. MOC does not allow an
association to both an entity and attribute.
Running the MTH: Process and Populate MOC Entity Sustainability Aspect
Run the MTH: Process and Populate MOC Entity Sustainability Aspect to
calculate the
carbon emission and electricity usage costs for an entity. When you run
the concurrent
program the data obtained from the meter readings is processed to
calculate the
sustainability aspect consumed, the cost of and the carbon emission due
to the
consumption.
To run the MTH: Process and Populate MOC Entity Sustainability Aspect
1.
Navigate to the Parameters window.
2.
Enter the Process Mode as:
•
INIT to run the process in Initial mode.
•
INCR to run the process in Incremental mode.
3.
Enter the Meter Calculation Start Date.
4.
Click Submit.
5.
Note the Request ID number.
6.
Choose View from the menu and select Requests to view the status of your
request
in the concurrent program manager.
7.
When your request ID is complete with a Status of Normal, click View
Details to
view the details of the run.
Creating Equipment Contextualization Information
Contextualization is the ability to take highly granular tag data
collected from shop
floor transactions and convert it into meaningful business data for
analyzing. The
contextualization rules engine enables users with various levels of
sophistication on the
shop floor to add the business context to the data tags. There are two
tag types used:
•
Business Context Tags–tags that provide work order, operation, product,
and

•
Data Tags–tags that provide value of output quantity, scrap quantity,
rework
quantity, reject quantity, completed quantity, equipment status, and
attribute tags.
The Equipment Contextualization page is used to associate a
contextualization method
for equipment and to define the mandatory or optional context for the
business related
to that equipment. The following three methods are used to add the
business context:
Tag Based Contextualization
Business context such as work order, operation, and item is derived from
the tags that
are configured in the PLC for that equipment from the shop floor. The
business context
tags and the data tags are received into MOC with using the same group
identifier for
this type of contextualization.
Schedule Based Contextualization
Business context is derived from the equipment production schedule. If
this
contextualization method is selected, MOC uses the data tags from the
equipment to
select business context of:
•
Work order and operation from the equipment production schedule
•
Product from production material produced
•
Equipment based on the setup of the tag to equipment association is done
•
Shift based on the reading time
Manual Contextualization
Context is determined through data entered manually and is not derived
from the
Manufacturing Operations Center hub. The Manual Contextualization page on
the Tag
Data Workbench under the User role enables you to manually enter and edit
context for
all active tags that have not been summarized in the Equipment Summary
tables.
To select equipment for contextualization:
1.
Navigate to the Equipment Contextualization Setup page.
2.

Select a value in the Plant field.
3.
In the Equipment field, select a specific record and then select Go. You
can also
leave the field null and select Go to display all the equipment records
for the plant.
The results table displays all the equipment associated to this plant
record.
7

4.
To edit equipment contextualization values, select equipment records and
select a
Contextualization Method. Choices are:
•
Tag Based—context is determined through tag readings of the equipment.
•
Schedule Based—context is determined through schedule data in the
Equipment Production Schedules table.
•
Manual—context is determined through data entered manually.
5.
In the Workorder field, indicate whether a business context is Mandatory
or
Optional for the selected equipment.
Workorder context is determined from either the tag or the equipment
production
schedule.
6.
In the Workorder Segment field, indicate whether a business context is
Mandatory
or Optional for the selected equipment.
7.
In the Item field, indicate whether a business context is Mandatory or
Optional for
the selected equipment.
3-8

8.
Save your work.
To change multiple records using the same contextulization rule:
1.
Select equipment records to create similar contextualization rules.
2.
Select Enter Context in Batch to display the Batch Equipment
Contextualization
Update page.
3.
Select the appropriate values in the following fields for the batch
update:
•
Contextualization Method
•
Workorder
•
Workorder Segment
•
Item
4.
Select Enter in Batch to return to the Equipment Contextualization Setup
page.
5.
Save your work to create the batch update for the selected records.
Related Topics
Setting Up Tags, page 3-2
Adding Reason Codes
You can use tags to display reasons for downtime status and scrap
quantity. You can
define a list of all reason codes and reason meanings for Manufacturing
Operations
Center (MOC) plants, at the Instance level in FND_LOOKUPS, and equipment
level in
the Equipment Reason Setup user interface. In the Tag Mapping setup for
the reason
tag, map the tag to a data element (Equipment Downtime Reason and Scrap
Reason).
You can set up Reason Codes using FND Lookup. Lookup types seeded by
Manufacturing Operations Center include:
9

•
MTH_SCRAP_REASON (for setting up scrap reasons)
•
MTH_EQUIP_DOWNTIME_REASON (for setting up downtime reason)
Add reason codes in the Application Object Library Lookups window from
the
Development Manager responsibility. You can also set up reason codes
using the
Lookups menu from the MOC Administrator's responsibility.
To add reason codes:
1.
Navigate to the Application Object Library Lookups window.
2.
In the Type field, query by example MTH_SCRAP_REASON,
MTH_EQUIP_DOWNTIME_REASON, or MTH_EQUIP_IDLE_REASON. The
window displays all Reason Codes associated with these types.
3.
Click a new (empty) row to add a new code.
4.
Enter a Code.
5.
Enter a Meaning for the code.
6.
Enter an optional Description.
7.
Enter an Effective date range. The From date defaults to the current
date.
8.
The Enabled indicator defaults to Enabled.
3-10

Setting Up Equipment Reason Codes
You must add equipment reason codes prior to adding events. Reason codes
define the
Equipment Down event types with associated reasons.
Equipment can be down and unavailable due to planned preventive
maintenance
activities. MOC updates the equipment shift for each equipment item,
taking into
account planned downtime.
MOC captures the expected uptime for each equipment item when the
equipment is
down due to unplanned downtime, or when equipment is idle. The
application helps to
identify equipment availability for production.
To set up equipment reason codes:
1.
Navigate to the Equipment Reason Code Setup page. Use the Equipment
Reason
Code Setup page to set up equipment downtime reason codes. You can define
the
following reasons for equipment:
•
Downtime Reasons and Expected Uptime
•
Idle Time Reasons and Expected Uptime

•
Scrap Reasons
2.
Select an Equipment Hierarchy from the List of Values (LOV).
3.
Select a Level Name from the LOV..
4.
Select a Level Instance.
5.
You can optionally select an Equipment Criticality value from the LOV.
6.
Click Go to perform your search. Based on the search criteria, the page
displays the
Level Instance and equipment for the selected Level in the Equipment
Hierarchy.
7.
Select one or more equipment rows and click the Update Sequentially
button to
navigate to the Update Equipment Reason Code Sequentially page. You can
add
Downtime reasons, Idle Time reason, and Scrap reasons for your equipment.
You
can also define Expected Uptime for each Downtime and Idle Time reason
code.
To add or update equipment reason code sequentially:
1.
From the Update Equipment Reason Code Sequentially page, select the
Downtime
tab to add or update equipment downtime reason codes and expected uptime.
3-12

2.
Enter a Downtime Reason Code, or select a code from the search page.
3.
Enter a value for Expected Uptime (Hours).
4.
Click the Next button to enter Downtime reasons for the next equipment
item that
you selected, or click Apply to save your work.
5.
Select the Idle Time tab to enter equipment idle time reason and expected
uptime.
6.
Enter an idle time Reason Code, or select a code from the search page.
7.
Enter a value for Expected Uptime (Hours).
8.
Click the Next button to enter Idle Time reasons for the next equipment
item that
you selected, or click Apply to save your work.
9.
Select the Scrap tab to enter equipment scrap reasons.
13

10.
Click Add to enter a new scrap reason.
11.
Enter a Reason Code, or select a code from the search page.
12.
Click the Next button to enter Scrap reasons for the next equipment item
that you
selected, or click Apply to save your work.
Setting Up Events
Oracle Manufacturing Operations Center (MOC) provides a workbench to
generate and
process events based on event types. The events are created based on
Oracle Warehouse
Builder pluggable mapping, and is defined as an event type. Based on the
event type,
action is taken by PL/SQL.
MOC supports collection of data from external OPC systems, and by using
Event
Management Framework, the application routes events and takes appropriate
actions.
Update Equipment Event Action Sequentially Page
Use this page to add and update Event Types and Event Actions. You can
also add
notifications when events occur. You can add and update event types and
actions for
equipment items in order of selection from the Events Setup page. You can
also view
event actions previously added for equipment items (rows).
To set up events:
1.
Navigate to the Event Setup page. Use the Event Setup page to set up
event actions
for event types. You can select the following actions against an event
type by
equipment items:
•
Seeded action such as creating work requests in eAM
•
Calling custom APIs or PL/SQL scripts
•
Sending e-mail notifications
3-14

•
Sending mobile alerts
2.
Select an Equipment Hierarchy from the List of Values (LOV).
3.
Select a Level Name from the LOV.
4.
Select a Level Instance.
5.
You can optionally select an Equipment Criticality value from the LOV.
6.
Click the Go button to perform your search. Based on the search criteria,
the page
displays the Level Instance and equipment for the selected Level in the
Equipment
Hierarchy.
7.
Select one or more equipment rows and click the Update Sequentially
button to
navigate to the Update Equipment Event Action Sequentially. You can add
or
update event actions for each equipment row selected.
To add or update equipment event actions:
1.
From the Update Equipment Event Action Sequentially page, click the Add
button
in the Event Types region to add a new Event Type. If an event action was
previously defined for an event type and you return to this page, then
the earlier
definition appears and you can modify the actions, if required.
15

2.
Select an Event Type from the LOV.
3.
Select a Reason Code from the LOV (if applicable.) The Reason Code LOV is
enabled only for the Equipment Down event type.
4.
Click the Add button to add Event Types.
5.
Select the Event Action tab. The Seeded Actions region appears.
6.
Click the Add button to add a seeded event action.
7.
Select a seeded Event Action from the LOV.
8.
Select the Name and the appropriate indicators for the notification
method.
9.
Click the Add button in the Custom Actions region to add custom event
actions
10.
Select the Notification tab to add event notifications.
3-16

11.
Click the Add button to add new notifications.
12.
Enter notification details for the selected event.
13.
Click Finish to save your work.
14.
Click the Next button to add event actions for the next equipment item
that you
selected, or click Finish to save your work.
Setting Up Extensible Attributes for MOC Entities
Oracle Manufacturing Operations Center supports an extensible attributes
framework
to capture specific attributes for manufacturing entities. The extensible
attributes
framework helps in setting up and capturing parameters that are unique
for your
business environment, plant, equipment, items, work orders, batch
operations and
user-defined entities. The extensible attributes setup consists of the
following steps:
•
Setting up profile options for item and equipment entity classifications
•
Defining classifications for Others entity type
•
Creating attribute groups
•
Creating attributes
•
Associating attribute groups to classifications
•
Creating attribute pages
17

Entities and Classifications
Shop floor or manufacturing entities are business objects in Oracle
Applications with
unique characteristics and processes. MOC supports item, equipment, work
order,
batch operation, and miscellaneous custom entities.
Entities are grouped into classification to define the type of attributes
they can monitor.
For example, boiler equipment in the shop floor are classified into one
group which is
the resource Boiler. You can define this classification using attribute
metadata such as
Pressure, Temperature, and so forth. Each MOC entity type page contains
two tabbed
regions: Classifications and Attributes. Entity pages open with all the
classification
values displaying in the search results table region. You can filter this
list.
Classifications are defined based on the hierarchy of the entities. The
hierarchy level is
determined by the information in the following table:
Entity Classification Source
Creation
Values
Item: Profile Option–MTH:Item
Classification for Extensible
Attributes
Hierarchy Name. The level is
always Level 9 for the
hierarchy selected.
Equipment: Profile Option–
MTH:Equipment
Classification for Extensible
Attributes
Hierarchy Levels.
Work Order: Work order type Discrete or Process
Manufacturing work order
types only.
Other:. No classification N/A
Batch Operations Work order Work Order Number
Attributes and Attribute Groups
Attribute groups are a grouping of similar attributes used to monitor an
entity. For
example, Specifications is a seeded attribute group for the Equipment
entity containing
the attributes Parameter, Upper Control Limit, and Lower Control Limit.
Oracle

Product Information Management functionality is used for attribute
creation.
Similar attributes can be categorized in an attribute group, such as a
collection of items
similar in type or function. You can:
• Group attributes based on business functions
3-18

Viewing Classifications for Shop Floor Entities
Manufacturing Operation Center entities are grouped into classifications,
and
associated to attributes that define specific characteristics for items
in your organization.
MOC supports item, equipment, work order, user-defined entities, batch
operation, and
other miscellaneous entities:
•
Equipment classifications can designate the machine or plant location
where
manufacturing activity is performed on the shop floor.
•
Item entity classifications can be group by categories such as product or
line type,
ABC classes, or cost structure.
•
Other entity classifications are created on the Extensible Attributes
Workbench per
your requirements for miscellaneous categories in your organization.
•
Work Order classifications designate Work in Process work order types,
choices are
discrete or process types.
To view entity classifications:
1.
Navigate to the specific Entity page.
MOC provides Entity: Batch Operation, Entity: Equipment, Entity: Item,
Entity:
Others, Entity: User Defined and Entity: Work Order.

There are two tabbed regions: Classifications and Attributes. The page
opens with
all the classification values displaying in the search results table
region.
Classifications are created in several different areas depending on the
entity type,
You can filter your list by entering a value in the Classification field
and selecting
Go.
2.
Select a value link in the Classification column to navigate to the
Classifications
Details page.
This page displays the following values in the Basic Information and
Other Details
regions:
•
Classification—name for this grouping
•
Entity—type of entity
•
Classification Code
This page enables you to navigate to associated attribute groups and
attribute pages
for this item classification.
3-20

To create and update Others entity classifications:
1.
Navigate to the Entity: Others page.
The page opens with all the Classification values displaying in the
search results
table region.
2.
Select Create to create a new classification record.
3.
On the Create Classification page— enter values in the Name and,
optionally,
Description fields.
21

Viewing and Creating Attribute Group Data for Entities
Manufacturing Operation Center Equipment entities are associated to
attributes that
capture specific characteristics for functional areas in your
organization. Similar
attributes can be categorized in an attribute group, and you can define
an unlimited
number of attribute groups that fit your business environment.
To view all attribute groups created for specific entities:
1. In the specific Entity page, select the Attributes tabbed region.
This includes the Entity: Batch Operation, Entity: Equipment, Entity:
Item, Entity:
Others, Entity: User Defined, and Entity: Work Order pages.
All the existing attribute groups for the specific entity type selected
appear in the
results table.

You can filter the display by using a combination of values and
conditional
qualifiers in the following fields: Attribute Group Display, Attribute
Group
Description, Attribute Group Descriptions, Behavior, Business Entity,
Database
View, and Internal Name.
This page enables you to select:
•
A record link in the Display Name column to navigate to the Attribute
Group
Details page
•
Create to navigate to the Create Attribute Group for Equipments page
•
Copy to create a new attribute group using information in an existing
record
To view and add attribute groups to a shop floor entity:
1.
On the specific Entity Classification Details page, select Attribute
Groups to display
the Attribute Groups for an entity page.
All attribute groups associated to this equipment entity appear.
You can filter the results by using values for Display Name or
Description. This
page enables you to:
•
Navigate to the Attribute Group Details page.
Select an attribute group value link.
23

• Add attribute groups to this specific entity.
2.
Select Add Attribute Groups to associate attribute groups to the entity
selected.
Depending on the entity is selected, the following pages appear:
•
Add Attribute Groups for Batch Operation
•
Add Attribute Groups for Equipment
•
Add Attribute Groups for Item
•
Add Attribute Groups for Others
•
Add Attribute Groups for User Defined Entities
•
Add Attribute Groups for Work Order
On the Add Attribute Groups page you can filter the display by using a
combination of Attribute Group Type, Behavior, Display Name, Description,
and
Internal Name.
3-24

Viewing and Creating Attribute Pages for Entities
Attribute pages can be created for each entity for ease of use in data
entry and viewing.
You can assign multiple attribute pages to a specific entity attribute
group. For each
page, you can choose the attributes displayed and the specific order
listed.
To view and create Attribute Group Pages:
1. Select Pages to display attribute pages created for this entity
classification.
This includes Batch Operation Pages, Equipment Pages, Items Pages, Others
Pages,
User Defined pages, and Work Order Pages.

The attribute group pages for the specific entity selected appear in the
results table.
You can search records on the entity Pages by Display Name or
Description.
2. Select Create to create a new page for this entity.
The Add Pages for the select entity type appears.
3-26

3.
Enter the following data in the Basic Information region:
•
Display Name—name displayed on the page.
•
Description—a description of the attribute category.
•
Internal Name—internal name for the page, this value cannot be updated
once
a page has been created.
•
Sequence—sequence number for each page associated with an attribute
group,
the sequence number determines the order pages are listed.
4.
In the Attribute Groups region, select Add Another Row to add attributes
groups to
this page. To add an existing attribute group:
•
Enter a Sequence number
•
Select an existing Display Name value
5.
Select Apply to save your work.
The attributes for this entity, and the display sequence appear in the
Pages region.
27

Related Topics
Setting Up Extensible Attributes for MOC Entities, page 3-17
Viewing Classifications for Shop Floor Entities, page 3-19
Viewing and Creating Attribute Group Data for Entities, page 3-22
3-28

User Role
Overview of the User Role
The Manufacturing Operations Center (MOC) User role is used to integrate
shop floor
devices in manufacturing plants to the Manufacturing Operations Center
for the
purpose of data collection and reporting. The MOC User role consists of
three
functional areas - Tag Data Workbench, Extensible Attributes Data, and
Manufacturing
Operations Center Analytics.
•
Tag Data Workbench includes:
1.
Manual Contextualization page - use this page to view or update business
context for data that has the context method as Manual Contextualization.
2.
Equipment Downtime Reason page - use this page to provide Downtime
Reasons for the downtime event.
3.
Equipment Scrap Reasons page - use this page to provide scrap reasons for
the
scrap event.
•
Extensible Attributes Data - used to view and add data to entities such
as Items,
Equipment, Work Orders, Batch Operations, and miscellaneous custom
entities.
•
Manufacturing Operations Center Analytics - provides analytical tools and
reporting using the Manufacturing Operations Center Catalog and the Plant
Manager, Facilities Manager, and Adhoc Dashboards.
•
Shift Exceptions - use this page to edit shifts for exceptions. Refer to
the topic
"Editing Shifts for Exceptions" in the Setting Up Time Dimension
Hierarchies
chapter of the Oracle Manufacturing Operations Center Implementation
Guide for more
information.
•
Actual Meters Data Entry- Use this page to enter meter readings manually
using the
User Role 4-1

Using the Manual Contextualization Method
Use the Manual Contextualization page to manually enter and edit context
for all active
tags that have not been summarized to the equipment summary tables, and
whose
contextualization method is either schedule-based or manual-based. If you
use the
manual contextualization method, then the application will not apply any
logic to get
the context, other than equipment and shift, and you can manually enter
the work
order, segment, or item context in the Manual Contextualization page.
For the schedule-based contextualization method, you must update the
Equipment
Production Schedule to get the context of shift, work order, segment, and
item. Using
Manual Contextualization page, mark the rows for reprocessing to get the
updated
context for the tag from Equipment Production Schedule.
To manually enter and edit context:
1.
Navigate to the Manual Contextualization page.
2.
Select a Plant. You can refine your search further by selecting a value
in the
Equipment field and Tag field.
3.
Enter From and To Dates to refine your search to a specific date range.
4.
Click Go.
5.
You can display your search results by Missing Mandatory Context Only,
Missing
Optional Context Only, or All Context. The Missing Mandatory Context Only
option displays tag rows that do not have the context, but were set as
mandatory
context for the equipment. The Missing Optional Context Only option
displays tag
rows which do not have the context but were set as optional context for
the
equipment. All context displays rows from both Missing Mandatory and
Optional
Context options.

To update context detail:
You can update context detail for each row, or update context detail for
multiple rows
in a batch.
1.
To update context within a single row, click the search icon for a
context field. The
Search and Select window appears.
2.
Enter your search criteria and click Go. A list of results displays.
Select a value and
click Select.
3.
To update context for multiple rows in a batch, select rows that you want
to update
and click the Enter Context in Batch button. The Batch Contextualization
Update
page appears.
4.
Enter each context and click the Enter in Batch button. Each context
field for the
selected rows are updated.
5.
Save your work.
Related Topics
Creating Equipment Contextualization Information, page 3-6
User Role 4-3

Viewing and Adding Reason Codes
From the Tag Data Workbench, you can add or view reasons for equipment
downtime
or equipment scrap quantity.
To view and add reason codes from the Tag Data Workbench:
1.
Navigate to the Equipment Downtime Reason page or the Scrap Reason page.
The
Tag Data Workbench appears.
Note: The following steps apply to both Equipment Downtime
Reasons and Equipment Scrap Reasons.
2.
Select a Plant from the List of Values (LOV).
3.
Enter a valid value for Equipment, or search for a value.
4.
Specify a date range for viewing or adding equipment downtime or scrap
reason.
5.
Click Go. The page displays the equipment downtime or scrap reading.
6.
Select rows to view and add one or more reasons.
7.
Click the View Reason button to view existing reasons for the date range
specified.
8.
Click the Enter Downtime Reason button to add a downtime reason to your
equipment. The Downtime Reasons Entry page appears.
Note: If you are adding Equipment Scrap Reasons, then the
4-4

Equipment Scrap Reasons page appears.
9.
In the Downtime Reason field or Scrap Reason field, enter a value, or
search for a
valid reason. You can add multiple reasons to selected equipment downtime
or
scrap reading rows.
10. Save your work. You can now click the View Reason button to verify
that the
reason code is now attached to the selected downtime or scrap reading
rows.
Extensible Attributes Data for Entities
Equipment and other manufacturing entities are business objects in the
shop floor with
unique characteristics and processes. MOC supports the collection of
attributes for item,
equipment, work order, batch operation, and miscellaneous custom
entities. You can
update or view attributes for manufacturing entities from the
Manufacturing
Operations Center User responsibility.
To view extensible attributes data for entities:
1.
Navigate to the entity-specific page. The entity-specific attributes
display.
User Role 4-5

2.
You can further refine your display by searching on the Entity Name.
3.
Click on an Entity Name link to view details. The Overview page appears
and
displays entity-specific details.
Note: The MOC User Role allows you to enter the values for the
attributes. A typical example would be defining specification
attributes and comparing with actual attribute values for the
entities.
The Entity Instance Attribute Details page of the MOC
Administrator Role appears in the MOC User Role for the entity,
and allows you to enter or view the attribute values.
Actual Meters Data Entry
You can enter meter readings manually using the Actual Meters Data Entry
page and
also view the history of readings for a meter.
4-6

To enter meter readings manually:
1.
Navigate to the Actual Meter Data Entry page.
2.
Enter Sustainability Aspect to find a meter using its sustainability
aspect.
3.
Enter the following criteria to search for a meter:
•
Meter Type to find a meter using its type.
•
Entity Hierarchy to find a meter using its entity hierarchy
•
Entity and Entity Name to find a meter by its entity.
4.
Click Go. The page displays a list of all the actual meters for which you
can enter
data readings.
5.
The following fields display for each meter:
•
Meter Code
•
Meter Name
6.
Enter the time period for which you want to enter the readings in the
From Time
and To Time fields.
7.
Enter the value of the sustainability aspect usage in the Usage Value
field. Usage
UOM is the unit of measure in which the sustainability aspect usage is
expressed.
User Role 4-7

Manufacturing Operations Center Catalog
Overview of the MOC Catalog
The Manufacturing Operations Center Catalog provides the Plant Manager
Dashboard,
Facilities Manager Dashboard, and Ad hoc Dashboard with performance areas
related
to manufacturing operations. It uses the ISA-95 (Instrumentation, Systems
and
Automation Society) structure to integrate Enterprise Resource Planning
(ERP) and
shop floor manufacturing equipment and systems transactions. This
combination
enables the catalog to provide operational analytics visibility. The
catalog uses data
from multiple sources and builds a logical data model providing industry-
rich
operational metrics to be analyzed by multiple dimensions and
hierarchies. The
manufacturing performance areas include the following:
Performance Areas Description
Agility Responsiveness Used to analyze flexibility related measures
by system, plant, item, time and equipment.
Batch Analyzer Used to analyze usage and production
variance and other work order related
measures by system, item, plant and time.
Equipment Attributes Data Attributes associated to equipment entities.
Equipment Down Time Analysis Used to analyze the downtime duration of
equipment.
Equipment Scrap Analysis Used to analyze the scrap quantity reported
for the equipment at different points of time.
1

Manufacturing Asset Performance Used to analyze overall equipment
effectiveness and production loss analysis by
system, plant, item, time, and equipment.
Plant Maintenance Used to analyze maintenance related
downtime measures by system, time, and
equipment.
Production Performance Used to analyze operation cycle time and its
components of run, down, and idle time
contributing to cycle time.
Quality Used to analyze first pass yield, scrap, reject,
and rework measures by system, plant, time,
and equipment.
Schedule Adherence Used to analyze production to performance
and backlog related measures by system,
plant, item, time, and equipment.
Service Level Used to analyze manufacturing performance
relative to pegged sales orders shipped using
request and promise dates by system, plant,
item and time.
Sustainability Performance This performance area contains metrics that
measures sustainability performance of
manufacturing and non-manufacturing
companies. It contains metrics that a company
can use to monitor and reduce energy
consumption, its cost, and associated Green
House Gas emissions.
Production Sustainability Performance Used to analyze sustainability
performance of
production organizations. Contains
normalized sustainability metrics by
production activity.
Equipment Sustainability Analysis used to analyze sustainability
characteristics
of manufacturing equipments. Contains
metrics that contextualizes manufacturing
activity and consumption data.
5-2

Ad hoc Analysis It is used to analyze electricity consumption,
pressure, and temperature for an entity and
specific time -period.
Key Performance Indicators (KPIs)
The MOC Catalog provides KPIs based on the analytics layer of Oracle
Business
Intelligence. These KPIs are industry-rich metrics used in managing the
plant
operations. Since these metrics are available on the metadata-driven
Oracle Business
Intelligence tool, you can personalize and modify existing reports and
the Plant
Manager and Facilities Manager Dashboards. It also enables flexibility to
add new and
modify existing KPIs in the catalog.
Performance Area: Batch Analyzer
KPI Description
Work Order Quantity variance Variance of actual produced quantity
compared to the planned production quantity
in units.
Work Order Quantity variance % Variance of actual produced quantity
compared to the planned production quantity
in percentage.
Work in Progress Planned Quantity WIP Planned Quantity for OPM batches.
The
quantity that is planned during the release of
process batch for production.
Material Usage Variance Cost of variance of actual usage quantity
compared to the planned usage quantity for
components
Resource Usage Variance Cost of variance of actual usage quantity
compared to the planned usage quantity for
resources
Work order or Batch Cycle Time (Hours) Cycle time between start and end
of a work
order or batch
3

KPI
Description
First Time Quality % Ratio of the total production that is good the
first time without any rejection or scrap
PPM on completed Work Orders Parts per Million - estimated rejected and
scrapped quantity for every million units of
production.
Work Order Planned Start Date Work Order Planned Start Date
Work Order Planned Completion Date Work Order Planned Completion Date
Work Order Actual Start Date Work Order Actual Start Date
Work Order Actual Completion Date Work Order Actual Completion Date
Work Order Actual Completion Quantity Work Order Actual completed
quantity
without reject or scrap
Work Order Planned Completion Quantity Work Order Planned Completion
Quantity
Work Order Planned Material Usage Quantity Planned material usage
quantity for the work
order
Work Order Actual Material Usage Quantity Actual material usage quantity
for the work
order
Work Order Planned Resource Usage
Quantity
Planned resource usage quantity for the work
order
Work Order Actual Resource Usage Quantity Actual resource usage quantity
for the work
order
Work Order First Time Good Quantity Work Order Output Quantity that has
not
been reworked or scrapped
Work Order Total Rejected Quantity Work Order Total Rejected Quantity
which
includes rework and scrap
Production Material Consumed Scrap
Quantity
Planned Scrap quantity based on scrap factor
associated with ingredients in process batches
5-4

Performance Area: Service Levels
KPI
Description
Manufacturing Performance to scheduled ship
date
Percentage of work orders that were
completed on or before scheduled ship date of
the pegged SO line
Manufacturing Performance to request date Percentage of work orders that
were
completed on or before request date of the
pegged SO line
Manufacturing Performance to promise date Percentage of work orders that
were
completed on or before promise date of the
pegged SO line
Sales Order Number Sales Order Number
Sales Order Line Number Sales Order Line Number
Customer Customer Name
Sales Order Ship Date Sales Order Ship Date
Sales Order Request Date Sales Order Request Date
Sales Order Promise Date Sales Order Promise Date
Performance Area: Manufacturing Asset Performance
KPI
Description
Equipment Calendar Time (Hours) Work Hours Based on Site Calendar
Equipment Scheduled Time (Hours) Scheduled Availability Time based on
Equipment Shift Availability
Production Loss - Planned (Hours) Planned equipment downtime (down for
maintenance or other reasons) in Hours
5

KPI
Description
Production Loss - Planned (Value) Cost of Planned equipment downtime
(down
for maintenance or other reasons) in terms of
resource cost
Production Loss - Planned (%) Cost of Planned equipment downtime (down
for maintenance or other reasons) in
percentage terms of %
Actual Down Time (Hours) Unplanned Equipment Down time
Actual Available Time (Hours Actual Available time for the equipment
after
accounting for planned and unplanned
downtimes
Production Loss due to Unplanned Downtime
(Hours)
Unplanned equipment downtime (down
because of breakdown or other reasons) in
Hours
(Value)
because of breakdown or the reasons) in terms
of resource cost
(%)
because of breakdown or other reasons) in
percentage terms
Machine Availability Ratio Actual time for which equipment was
available for operation divided by calendar
time based on the site calendar
Actual Run time (Hours) Equipment Run Time
Production Loss due to Other Reasons
(Hours)
Unplanned Equipment Production Loss in
Hours due to reasons other than downtime,
efficiency or bad quality (lack of demand or
material)
Production Loss due to Other Reasons (Value) Unplanned Equipment
Production Loss in
cost terms due to reasons other than
downtime, efficiency or bad quality (lack of
demand or material)
5-6

KPI
Description
Production Loss due to Other Reasons (%)
percentage terms due to reasons other than
downtime, efficiency or bad quality (lack of
demand or material)
Machine Efficiency
Actual rate of production compared to the
ideal rate of production
Effective Run Time (Hours)
Effective Equipment Run time after taking
machine efficiency into account
Performance Ratio
Ratio of effective run time to actual available
time
Production Loss due to Efficiency (Hours)
Hours Due to Machine inefficiency when
compared to ideal rate of production
Production Loss due to Efficiency in %
cost terms Due to Machine inefficiency when
compared to ideal rate of production
Production Loss due to Efficiency (Value)
percentage terms Due to Machine inefficiency
when compared to ideal rate of production
Equipment Output Quantity
Total Equipment output quantity including
good and bad quantities
Equipment Standard Rate
Equipment Standard production rate in units
per hour
Equipment First Time Good Quantity
Equipment Output Quantity that has not been
reworked or scrapped
First Pass Yield
Percentage of the total production that is good
the first time itself without any rejection or
scrap

Overall effective run time (Hours)
Effective Run Time after deducting for bad
quality
7

KPI
Description
Production Loss due to Bad Quality (%) Unplanned Equipment Production
Loss in
Hours due to bad quality
Production Loss due to Bad Quality (Hours) Unplanned Equipment Production
Loss in
cost terms due to bad quality
Production loss due to Bad Quality (Value) Unplanned Equipment Production
Loss in
percentage terms due to bad quality
Equipment Standard Efficiency Standard efficiency of the equipment in
Percentage
Equipment Standard Utilization Standard Utilization of Equipment in
Percentage
Resource Standard Efficiency Standard efficiency of the Resource in
Percentage
Resource Standard Utilization Standard Utilization of Resource in
Percentage
Overall Equipment Effectiveness Overall Equipment Effectiveness
Performance Area: Schedule Adherence
KPI
Description
Performance to schedule % Actual production compared to Scheduled
production
Production to Schedule linearity (Actual vs
Schedule) Applies to Lean
Difference between actual and scheduled
production measured on a linearity scale of 1
Shift Scheduled Production Production Scheduled for the current shift
Shift Actual Production Actual Production for the current shift
Total Production $ (Production Reporting) The cost value of total
production
5-8

KPI
Description
Remaining Shift Time (Hours) Remaining hours of production for current
shift
Work remaining for the Shift Cost value of Open Work orders meant to be
produced in the given shift
Production Backlog Value Cost value of Open Work orders meant to be
produced in the given period
Production Backlog Hours The number of hours required to complete the
remaining backlog production for the period
Actual Completion Quantity Actual completed quantity without reject or
scrap
Equipment Scheduled Quantity Planned completion quantity for the
equipment
Equipment Standard Rate Equipment Standard production rate in units
per hour
Performance Area: Plant Maintenance
KPI
Description
Equipment Downtime % Equipment Downtime Compared to
Equipment Scheduled Time
Equipment Scheduled Time (Hours) Scheduled Availability Time based on
Equipment Shift Availability
Performance Area: Quality
KPI
Description
First Pass Yield Percentage of the total production that is good
the first time itself without rejection or scrap
9

KPI
Description
Bad Output % Percentage of the total production that is
rejected
Scrap % Percentage of the total production that is
scrapped
Rework % Percentage of the total production that is
reworked
Equipment First Time Good Quantity Equipment Output Quantity that has not
been
reworked or scrapped
Equipment Output Quantity Total Equipment output quantity including
good and bad quantities
Equipment Scrapped Quantity Equipment Scrapped Quantity
Equipment Reworked Quantity Equipment Reworked Quantity
Equipment Rejected Quantity Equipment Rejected Quantity
Performance Area: Agility and Responsiveness
KPI
Description
Flexibility Ratio The ratio of actual daily production to the
average daily production
Actual Completion Quantity Completed quantity from the equipment
without rework or scrap
Performance Area: Work Order
KPI
Description
Work Order Schedule Number Work Order Schedule Number
5-10

KPI
Description
Work Order Status Work Order Status
Work Order Type Work Order Type
Performance Area: Production Performance
KPI
Description
Average Cycle Time Average Cycle time for an Equipment to
process a Work Order Operation in a Shift
Cycle Time Cycle Time for an Equipment to process a
Work Order Operation in a Shift
Down Time during Cycle Down Time during Cycle
Idle Time during Cycle Idle Time during Cycle
Run Time during Cycle Run Time during Cycle
11

Performance Area: Sustainability Performance
KPI
Description
Sustainability Aspect Sustainability Aspect is a generic name used
for continuous inputs consumed by
companies in order to be able to operate and
create goods or services. Common examples
of sustainability aspect are electricity, gas, oil,
water, helium etc. Sustainability aspects
always have associated costs for companies
and are often source of harmful emissions to
environment. Companies usually monitor
consumption of sustainability aspects and
make efforts to minimize them for efficiency
and environmental concerns. Sustainability
aspect must be used along with other KPIs for
creating a query in OBIEE answers, in order to
constraint the result of the query to the
sustainability aspect of interest.
Consumption Actual sustainability aspect consumed by an
entity. For instance, an electric meter measures
electricity consumption readings of the entity.
The meter readings are collected for a
specified time frequency and transferred to
MOC, which then calculates the consumption
on an hourly basis. Consumption can be rolled
up from an hour to a shift, day, month, and
year.
Planned Consumption Planned sustainability aspect consumed by an
entity. For instance, electricity planned to be
consumed is entered in MOC and can be
rolled up to a quarter or a year.
Consumption (Last Year) Actual sustainability aspect consumed by an
entity in a specified period of the previous
year.
Consumption % Change (Plan) Percentage deviation of actual from planned
electricity consumption and is calculated as
Actual Electricity Usage - Planned Electricity
Usage x 100/ Planned Electricity Usage
5-12

KPI
Description
Consumption % Change (Last Year) Percentage deviation of actual
consumption in
a specific period of the current year from that
of the last year and is calculated as
Consumption % Change (Last Year) = (Actual
Consumption - Last Year's Actual
Consumption) x 100/ Last Year's Actual
Consumption.
Production Output Production output for an equipment,
production line, area, floor, or a department
expressed in the Primary UOM of the product.
The production output higher than equipment
level is calculated as the sum of the output of
all work orders for a specific product.
Production Output Value Value of the production output for an
equipment, production line, area, floor, or a
department.
Consumption Per Unit Area Actual consumption of an entity normalized
by total area of that entity. This is calculated
as Consumption per Unit Area = Actual
Consumption of Entity/Effective Surface Area
of Entity
Consumption Per Person Actual consumption of an entity normalized
by total number of persons of that entity. This
is calculated as Consumption per Person =
Consumption of Entity/Number of Persons.
Consumption per Unit Area (Last Year) Actual consumption of an entity
normalized
by total area of that entity in a specified period
of the previous year.
Consumption per Person (Last Year) Actual consumption of an entity
normalized
by total persons of the entity in a specified
period of the previous year.
Emission Actual emissions based on actual
sustainability consumption.
13

KPI
Description
Planned Emission Planned emissions based on sustainability
aspect consumption. It is calculated at every
level in the entity hierarchy where data is
available. This is calculated as Emission =
Emission Factor x Planned Consumption.
Emissions (Last Year) Emission (Last Year) Emissions based on
sustainability aspect consumed by an entity in
a specified period of the previous year.
Emission % Change (Plan) Percentage deviation of actual from planned
emissions and is calculated as Emission %
Change (Plan) = (Actual Emission - Planned
Emission) x 100/ Planned Emission.
Emission % Change (Last Year) Percentage deviation of actual emission in
a
specific period of the current year from that of
the last year and is calculated as Emission %
Change (Last Year) = (Actual Emission - Last
Year's Actual Emission) x 100/ Last Year's
Actual Emission.
Emission per Unit Area Actual emission of an entity normalized by
total area of that entity. This is calculated as
Emission per Unit Area = Actual Emission of
Entity/Effective Surface Area.
Planned Emission per Unit Area Planned emission of an entity normalized
by
total area of that entity. This is calculated as
Emission per Unit Area = Planned Emission of
Emission per Person Actual emission of an entity normalized by
total persons of that entity. This is calculated
as Emission per Person = Emission of
Entity/Number of Persons.
Planned Emission per Person Planned emission of an entity normalized by
total persons of that entity. This is calculated
as Emission per Person = Emission of
Entity/Number of Persons.
5-14

KPI
Description
Emission per Unit Area (Last Year) Actual emission of an entity
normalized by
total area of that entity in a specified period of
the previous year.
Emission per Person (Last Year) Actual emission of an entity normalized
by
total persons of the entity in a specified period
of the previous year.
Cost Cost of the actual sustainability aspect
consumed by an entity.
Planned Cost Cost of the actual sustainability aspect
planned to be consumed by an entity.
Cost (Last Year) Cost of the actual sustainability aspect
consumed by an entity in a specified period of
the previous year.
Cost % Change (Plan) Percentage deviation of the actual Cost from
Planned cost and is calculated as Cost %
Change (Plan) = (Cost- Planned Cost) x 100/
Planned Cost.
Cost % Change (Last Year) Percentage deviation of actual cost in a
specific period of the current year from that of
the last year and is calculated as Cost %
Change (Last Year) = (Cost - Last Year's Cost)
x 100/ Last Year's Cost.
Planned Cost per Unit Area Planned cost of sustainability aspect to be
consumed by an entity normalized by total
area of that entity. This is calculated as
Planned Cost per Unit Area = Planned Cost of
Cost per Unit Area Cost of sustainability aspect consumed by an
entity normalized by total area of that entity.
This is calculated as Cost per Unit Area = Cost
of Entity/Effective Surface Area.
5-15

KPI
Description
Planned Cost per Person Planned cost of sustainability aspect to be
consumed by an entity normalized by total
number of persons of that entity. This is
calculated as Planned Cost per Person =
Planned Cost of Entity/Number of Persons.
Cost per Person Cost of sustainability aspect consumed by an
entity normalized by total number of persons
of that entity. This is calculated as Cost per
Person = Cost of Entity/Number of Persons.
Cost per Unit Area (Last Year) Cost of sustainability aspect consumed by
an
entity normalized by total area of that entity in
a specified period of the previous year.
Cost per Person (Last Year) Cost of sustainability aspect consumed by an
entity normalized by total number of persons
of that entity in a specified period of the
previous year.
Total Consumption By Direct Usage Actual sustainability aspect consumed
by an
entity for production purposes. For example,
conveyor, robot, assembly station, automated
storage/retrieval system, air compressor, and
industrial lighting etc.
Total Consumption By Indirect Usage Actual sustainability aspect consumed
by an
entity for functions other than production,
such as research and development, sales and
marketing etc. For example, air compressor,
equipment, maintenance equipment, and
lighting.
Overall Consumption Actual sustainability aspect consumed by an
entity by direct and indirect usages.
5-16

Performance Area: Production Sustainability Performance
KPI
Description
Consumption Per Production Output Actual sustainability aspect consumed
by an
entity for the production of one unit of
production output. This is calculated as
Consumption Measurements for Production
of a Product in a Period/Units Manufactured
in Period.
Consumption Per Production Value Actual sustainability aspect consumed by
an
entity for the production of the value of one
unit of production output. This is calculated
as Consumption Measurements for
Production of a Product in a Period/Value of
Units Manufactured in Period.
Emission Per Production Output Emission based on actual sustainability
aspect
consumed by an entity for the production of
one unit of production output. This is
calculated as Emission Measurements for
Production of a Product in a Period/Units
Manufactured in Period.
Emission Per Production Value Emissions based on actual sustainability
aspect consumed by an entity for the
production of the value of one unit of
production output. This is calculated as
Emission Measurements for Production of a
Product in a Period/Value of Units
Cost Per Production Output Cost of actual sustainability aspect consumed
by an entity for the production of one unit of
production output. This is calculated as Cost
of Sustainability Aspect Consumed for
Production of a Product in a Period/Units
17

KPI
Description
Cost Per Production Value Cost of actual sustainability aspect consumed
by an entity for the production of the value of
one unit of production output. This is
calculated as Cost of Sustainability Aspect
Consumed for Production of a Product in a
Period/Value of Units Manufactured in
Period.
Performance Area: Equipment Sustainability Analysis
KPI
Description
Total Consumption (TC) Sum of Value Added Consumption and Non
Value Added Consumption.
Value Added Consumption (VAC) Actual sustainability aspect consumed by an
entity in the RUN status. This is applicable to
production entities only.
Non Value Added Consumption Actual sustainability aspect consumed by an
entity in the IDLE, DOWN, or OFF statuses.
This is applicable to production entities only.
Value Added Consumption% Percentage of the Value Added Consumption
per the Total consumption for an entity. This
can be calculated as (VAC X 100) / TC.
Dimensions
The KPIs in the performance areas can be analyzed by the dimensions
seeded in the
MOC Catalog. Each of the following dimension folders contain the
dimensions,
hierarchies and attributes to analyze the KPIs
• Attribute Group Metadata
• Down Time Reason
• Entity
• Equipment
• Equipment Attributes Data
5-18

•
Equipment Standard Rate
•
Item
•
Plant
•
Scrap Reason
•
Shift
•
Sustainability Aspect
•
System
•
Time
•
Time - Period To Date
•
Time - Transaction Date
•
Time Sustainability
•
Time - Work Order Actual Completion Date
•
Time - Work Order Actual Start Date
•
Time - Work Order Planned Completion Date
•
Time - Work Order Planned Start Date
•
Time - Ad hoc
•
Work Order
•
Work Order Segment
•
Work Order Sub Segment
Oracle Business Intelligence (BI)
The MOC Catalog is based on the analytics layer of the Oracle Business
Intelligence (BI)
platform from Oracle Fusion Middleware. The catalog uses this technology
to organize
data to analyze and provide the metrics required for measuring in the
your business.
The catalog interface consists of the Oracle BI Presentation Services and
the MOC
application. The interface is organized into pages with the following
components:
•
Answers

The Manufacturing Hub Catalog displays on this page and enables you to
build
19

Overview of Oracle BI for End Users, Oracle Business Intelligence
Answers, Delivers, and
Interactive Dashboards User Guide
Performing Common Tasks in Oracle BI, Oracle Business Intelligence
Answers, Delivers,
and Interactive Dashboards User Guide
Using the Oracle BI My Account Page, Oracle Business Intelligence
Answers, Delivers, and

Interactive Dashboards User Guide
Using the MOC Catalog
More than eighty KPIs are grouped in the Manufacturing Hub Catalog
selection pane.
These provide an aggregate level analysis on KPIs and enable you to drill
down to
detailed analysis.
To select catalog data for reporting:
1.
Navigate to the MOC Catalog and select the Answers link.
The Answers page contains two panes. The selection pane contains the
Manufacturing Hub Catalog columns you select. The display workspace shows
the
columns selected for the request.
2.
In the Selection pane, expand the specific columns for the areas you want
on your
report.
Columns indicate the columns of data that your request will return.
3.
Select details in the performance areas you want displayed on the report.
Choices selected appear in the display workspace in the Criteria tabbed
region.
21

The Criteria tab is used to view or change the columns and filters for
the request.
You can specify the order in which the results display, column subtotals,
formatting, formulas. For each selection you can format the column data
using the
following:
•
Value Format to override default settings such as font type and size
•
Edit Formula to change the formula for the column.
4.
You have the option to control the output display by creating a filter.
Choose the
Create/Edit Filter icon to create a filter expression to display as a
CASE statement.
You can save this filter for other reports.
5.
Select Display Results or the Results tabbed regions to display your
report.
5-22

You can choose several different display views, and combine views and
arrange
them for display on the Plant Manager, Facilities Manager, and Ad hoc
Dashboards.
6.
To combine the results of multiple requests, choose Select Combine with
Similar
Requests.
23

Plant Manager Dashboard
This chapter covers the following topics:
• Overview of the Plant Manager Dashboard
• Asset Performance (OEE)
• Asset Performance (OEE) by Equipment
• Equipment Downtime Analysis
• Equipment Downtime Reasons
• Production Slippage Trend
• Equipment Scrap Analysis
• Equipment Scrap Reasons
• Equipment Efficiency Analysis
• Equipment Efficiency Detail
• Production Loss Analysis
• Production Loss Detail
• Production Performance
• Batch Performance
• Batch Performance Detail
• Sustainability Performance by Department
• Sustainability Performance by Equipment
• Sustainability Performance Equipment Hourly Summary Page
• Sustainability Performance Equipment Hourly Detail Page
1

Overview of the Plant Manager Dashboard
Overall Equipment Effectiveness (OEE) is a key metric that every plant
manager
monitors. The Plant Manager Dashboard provides a complete view of the
equipment
and helps the plant manager to assess where the source for production
losses occur. The
Plant Manager Dashboard and integrated reports provide the plant manager
views of
the production data for the plant in terms of overall equipment
effectiveness, batch
performance, schedule adherence, and production loss analysis for the
departments and
equipment on the shop floor
Oracle Manufacturing Operations Center collects data from disparate
sources into this
single role-based dashboard that allows Plant Managers and staff to view
manufacturing operations efficiently and effectively. The open and
flexible BI
technology from Oracle Fusion Middleware makes it easy to build and
modify KPIs and
dashboards.
The Plant Manager Dashboard lets you report and analyze electricity
consumption,
electricity cost, and carbon emission for an entity You can view
information for all the
levels of entity hierarchy, plant, department, floor, floor section, and
equipment.
The following table identifies the dashboard pages and the reports made
available to
the Plant Manager role:
Dashboard Pages Reports
Asset Performance (OEE) Overall Equipment Effectiveness by Plant
Overall Equipment Effectiveness By Department
(Bottom Performers)
Overall Equipment Effectiveness Details By Plant
Overall Equipment Effectiveness Details By
Department
Overall Equipment Effectiveness Trend by Plant
Overall Equipment Effectiveness Trend by
Department
Asset Performance (OEE) by Equipment Overall Equipment Effectiveness by
Department
Overall Equipment Effectiveness by Equipment
(Bottom Performers)
6-2

Overall Equipment Effectiveness Details by
Department
Overall Equipment Effectiveness Details by
Equipment
Department
Equipment
Equipment Downtime Analysis Equipment Downtime Analysis
Machine Availability Ratio Trend
Equipment Downtime Reasons Downtime Reasons
Production Slippage Trend Production Slippage Trend
Production Loss Analysis Production Loss Distribution
Effective Production Capacity
Production Loss Analysis
Production Loss Detail Production Loss Detail
Equipment Efficiency Analysis Equipment Efficiency Analysis
Equipment Performance Ratio Trend
Equipment Efficiency Detail Equipment Efficiency Detail
Equipment Scrap Analysis Equipment Scrap Analysis
First Pass Yield Trend
Equipment Scrap Reasons Equipment Scrap Reasons
3

Batch Performance Production Variance by Product Category
Production Variance by Product
PPM Trend (Month to Date)
Batch Cycle Time Trend (Month to Date)
Service Level Performance by Product Category
Service Level Performance by Product
Batch Performance Detail Batch Performance Detail
Production Performance Performance to Schedule Measures by Plant
Performance to Schedule Measures by Department
Performance to Schedule Measures by Equipment
(Bottom Performers)
Production Slippage (Equipment)
Current Month Production Slippage Trend by
Department
Current Month Production Slippage Trend by
Equipment
Sustainability Performance Electricity Consumption
Electricity Cost
CO2 Emission
Production Value Analysis by Product
Trend
Ranking and Distribution
6-4

Asset Performance (OEE)
The Asset Performance page provides performance data for the plant and
displays the
bottom four departments performance in terms of Overall Equipment
Effectiveness
(OEE) measures. It displays Machine Availability Ratio, Machine
Performance Ratio,
and First Pass Yield. Asset Performance (OEE) reporting regions include:
•
Overall Equipment Effectiveness by Plant
•
Overall Equipment Effectiveness by Department (Bottom Performers)
•
Overall Equipment Effectiveness Details by Plant
•
Overall Equipment Effectiveness Details by Department
•
Overall Equipment Effectiveness Trend by Plant
• Overall Equipment Effectiveness Trend by Department
You can view Asset Performance (OEE) by the following dimensions:
•
Time dimension – Year, Quarter, Month, Day, and Shift
•
Equipment dimension – Plant
To view asset performance (OEE):
1.
From the Manufacturing Operations Center User responsibility, select the
Plant
Manager Dashboard. The Asset Performance (OEE) page appears. This page
displays Overall Equipment Effectiveness, Overall Equipment Effectiveness
Details,
and Overall Equipment Effectiveness Trend regions.
5

2. Scroll down the Asset Performance (OEE) page to view:
• Overall Equipment Effectiveness By Plant
• Overall Equipment Effectiveness By Department (Bottom Performers)
• Overall Equipment Effectiveness Details By Plant
• Overall Equipment Effectiveness Details By Department
• Overall Equipment Effectiveness Trend By Plant
• Overall Equipment Effectiveness Trend By Department
6-6

Asset Performance (OEE) by Equipment
The Asset Performance page provides performance data for equipment and
displays the
bottom four equipment performance in terms of Overall Equipment
Effectiveness (OEE)
measures. It displays Machine Availability Ratio, Machine Performance
Ratio, and First
Pass Yield. Reporting regions include:
• Overall Equipment Effectiveness by Department
• Overall Equipment Effectiveness by Equipment (Bottom Performers)
• Overall Equipment Effectiveness Details by Department
• Overall Equipment Effectiveness Details by Equipment
• Overall Equipment Effectiveness Trend by Department
• Overall Equipment Effectiveness Trend by Equipment
You can view Asset Performance (OEE) by Equipment by the following
dimensions:
• Time dimension – Year, Quarter, Month, Day and Shift
• Equipment dimension – Plant and Department

To view Asset Performance (OEE) by Equipment:
1.
From the Asset Performance (OEE) page, click on a Department gauge in the
Overall Equipment Effectiveness By Department (Bottom Performers) region.
For
example, click on the Paint Shop (SM1) gauge to drill down and display
details of
low OEE contribution. The Asset Performance (OEE) by Equipment page
displays
the Overall Equipment Effectiveness (OEE) for Equipment belonging to the
Paint
Shop department.
2.
Scroll down the page to view Overall Equipment Effectiveness Details by
Department and by Equipment regions. The page displays Machine
Availability
Ratio, Machine Performance Ratio, and First Pass Yield by Department and
by
Equipment.
3.
Change the View by to: Table
6-8

5. Scroll further to view Overall Equipment Effectiveness Trend by
Department and
by Equipment regions.
Related Topics
Asset Performance (OEE), page 6-5

Equipment Downtime Analysis
You can use the Equipment Downtime Analysis page to analyze the equipment
downtime by downtime reasons. Reporting regions include:
•
Equipment Downtime Analysis
•
Machine Availability Ratio Trend
• Equipment Downtime Detail
You can view equipment downtime by the following dimensions:
•
Time dimension – Year, Quarter, Month, and Day
•
Equipment dimension – Plant, Department, and Equipment
To view equipment downtime details:
1.
From the Asset Performance (OEE) by Equipment page, you can navigate to
the
Equipment Downtime Analysis page to view equipment downtime details.
Scroll
down to Overall Equipment Effectiveness Details by Equipment region.
2.
3.
Select a link from the Machine Availability column.
4. The Equipment Downtime Analysis page appears. This page displays
Equipment
Downtime Reasons and Machine Availability Ratio Trend graphs.
6-10

Equipment Downtime Reasons
The Equipment Downtime Reasons report lets you view the downtime reasons
for a
particular day selected from the Equipment Downtime Analysis page. The
report
displays Downtime Hours and Reasons for the equipment by Shift level for
the day.

To view Equipment Downtime Reasons:
1.
Navigate to the Equipment Downtime Analysis page and scroll down to the
Equipment Downtime details region.
2. Select a link from the Actual Down Time (Hours) column. The Downtime
Reasons
page appears and displays Equipment Downtime reasons by Shift for the
day.
3.
Click the Return link to return to the Equipment Downtime Analysis page.
Related Topics
Equipment Downtime Analysis, page 6-10
Production Slippage Trend
The Production Slippage Trend report displays the production slippage and
trend by
equipment and shift for a monthly period.
6-12

Equipment Scrap Analysis
You can use the Equipment Scrap Analysis page to analyze the scrap
transactions by
scrap reasons. Reporting regions include:
• Equipment Scrap Analysis

•
First Pass Yield Trend
• Equipment Scrap Detail
You can view scrap transactions by the following dimensions:
•
Time dimension – Year, Quarter, Month and Day
•
To view Equipment Scrap Analysis:
1.
Navigate to the Asset Performance (OEE) by Equipment page.
2.
Scroll down to the Overall Equipment Effectiveness Details - By Equipment
region.
3.
4.
Select a value in the First Pass Yield column. The Equipment Scrap
Analysis page
appears where you can view quality details. This page displays Equipment
Scrap
Analysis and First Pass Yield Trend graphs.
6-14

Equipment Scrap Reasons
The Scrap Reasons report lets you view the scrap reasons for a particular
day. Select
Scrap Reasons from the Equipment Scrap Analysis page. The report displays
the Scrap
Quantity and Reasons for the equipment at shift level for the day.

To view Equipment Scrap Reasons:
1. Navigate to the Equipment Scrap Analysis page.
2. Scroll down to the Equipment Scrap Analysis Details region.
3. Select a value in the Scrapped Quantity column to view scrap details
and reasons by
shift for the day. The Scrap Reasons report appears.
4. Select the Return link to return to the Equipment Scrap Analysis page.
Related Topics
Equipment Scrap Analysis, page 6-13
Equipment Efficiency Analysis
The Equipment Efficiency Analysis page displays production loss due to
inefficiency of
the equipment. Reporting regions include:
6-16

•
Equipment Efficiency Analysis
•
Machine Performance Ratio Trend
• Equipment Efficiency Detail
You can view Equipment Efficiency Analysis by the following dimensions:
•
•
To view the Equipment Efficiency Analysis page:
1.
Navigate to the Asset Performance (OEE) by Equipment page.
2.
Scroll down to the Overall Equipment Effectiveness Details by Equipment
region.
3.
Change View by to: Table.
4.
Select a value from the Machine Performance column for an equipment item.
The
Equipment Efficiency Analysis page appears. This page displays and
reports the
production loss due to inefficiency.
17

Equipment Efficiency Detail
The Equipment Efficiency Detail report lets you view the Equipment
Efficiency for a
particular day, and is selected from the Equipment Efficiency Analysis
report. The
report displays the Efficiency for the equipment at shift level for the
day.

To view Equipment Efficiency Detail:
1. Navigate to the Equipment Efficiency Analysis page.
2. Scroll down the page to the details region.
3. Select a value in the Machine Efficiency column. The Equipment
Efficiency Details
report appears.
4. Select the Return link to return to the Equipment Efficiency Analysis
page.
Related Topics
Equipment Efficiency Analysis, page 6-16
Production Loss Analysis
You can use the Production Loss Analysis page to analyze production loss
by
equipment. Reporting regions include:
• Production Loss Distribution
• OEE Time Analysis
• Production Loss Analysis
You can view Production Loss by the following dimensions:
19

• Time dimension – Year, Quarter, Month, and Day
• Equipment dimension – Plant, Department, and Equipment
To view Production Loss Analysis:
1. Navigate to the Asset Performance (OEE) by Equipment page.
2. Select the Production Loss Analysis link. The Production Loss Analysis
page
appears.
6-20

3.
The page displays the distribution of production loss as well as the OEE
time
metrics for the equipment.
4.
The page provides the Production Loss detail and can be defined as:
•
Planned
•
Unplanned
•
Due to Other Reasons
•
Due to Inefficiency
•
Due to Bad Quality
5.
Scroll down the page to view Production Loss Analysis. This includes
Total
Production Loss in hours and Overall Effective Run Time in hours.
21

Production Loss Detail
The Production Loss Detail page lets you view the Production Loss for a
particular day,
and is selected from the Production Loss Analysis page. The page displays
the
Production Loss and details for the equipment at the shift level for the
day.
You can view Production Loss Detail page by the following dimensions:
•
Time dimension – Year, Quarter, Month, Day and Shift
•
To view Production Loss Detail:
1.
Navigate to the Production Loss Analysis page and scroll down to the
Production
Loss Analysis region.

2. Select a value in the Total Production Loss column to analyze the
Production Loss
by day and shift. The Production Loss Detail page appears.
3.
This report displays the Production Loss detail as well as the OEE Time
Analysis
for equipment.
4.
Select the Return link to return to the Production Loss Analysis page.
23

Related Topics
Production Loss Analysis, page 6-19
Production Performance
The Production Performance page provides the performance to schedule
measures by
plant, department, and bottom performing equipment. It also displays
production
slippage in comparison to different shifts and the current month
production slippage
trend. Reporting regions include:
•
Performance to Schedule Measures by Plant
•
Performance to Schedule Measures by Department
•
Performance to Schedule Measures by Equipment (Bottom Performers)
•
Production Slippage by Equipment
•
Current Month Production Slippage Trend by Department
• Current Month Production Slippage Trend by Equipment
You can view Production Performance by the following dimensions:
•
Time dimension – Year, Quarter, Month, Day, and Shift
•
Equipment dimension – Plant and Department
To view Production Performance:
1.
Navigate to the Production Performance page. The page displays
Performance to
Schedule Measures By Plant, By Department, and By Equipment Bottom
Performers.
6-24

2. Scroll down the Production Performance page to view the Production
Slippage
(Equipment) region.
3. You can scroll down the page further to view Current Month Production
Slippage
Trend by Department and by Equipment.
25

Related Topics
Production Slippage Trend, page 6-12
Batch Performance
The Batch Performance page displays performance metrics that include Work
Order
Quantity Variance, PPM, Batch Cycle Time Trend, and Service Level
Performance.
Reporting regions include:
•
Production Variance by Product Category
•
Production Variance by Product
•
PPM Trend (Month to Date)
•
Batch Cycle Time Trend (Month to Date)
•
Service Level Performance by Product Category
• Service Level Performance by Product
You can view Batch Performance by the following dimensions:
•
•
Equipment dimension – Plant and Product Category
To view Batch Performance:
1.
Navigate to the Batch Performance page to view production variance. You
can view
production variance by Product Category and by Product.
6-26

2.
In the Production Variance By Product region, you can click on a Work
Order
Quantity Variance Percent bar within the bar graph to view work order
contributing details.
3.
Scroll down the Batch Performance page to view PPM Trend (Month to Date)
and
Batch Cycle Time Trend (Month to Date) regions.
4. Continue to scroll down the page to also view Service Level
Performance by
Product Category and by Product.
27

Batch Performance Detail
The Batch Performance page allows you to navigate to the Batch
Performance Detail
page. From the Batch Performance Details page, you can view details of
specific work
orders that are contributing to the production variance.
To view Batch Performance Detail:
1. Navigate to the Batch Performance page.

2.
In the Production Variance By Product region, you can click on a Work
Order
Quantity Variance Percent bar within the bar graph to view work order
contributing details. The page displays details of work orders that
contribute to the
production variance for the product.
3.
Select the Batch Performance link at the bottom of the page to navigate
back to the
Batch Performance page.
Related Topics
Batch Performance, page 6-26
29

Sustainability Performance by Department
The Sustainability Performance by Department page displays the
electricity
consumption, electricity cost, and carbon emission for all departments in
a plant.
To view the Sustainability Performance by Department page :
1.
Navigate to the Plant Manager dashboard using the Manufacturing
Operations
Center User responsibility. Select the Sustainability Aspect tab.
2.
Select the time period for which you want to view the details. Choose the
Year,
Quarter, Period, Week, and Date. All Choices displays as the default
value for all
the time period fields.
3.
Select the Plant for which you want to display the reports. All
production sites from
the Site master display in the list of values. The first site in
ascending alphabetical
order of Sites is the default value.
4.
Click Go. The Sustainability Performance by Department Appears. The
following
Plant Characteristics display:
•
Plant
•
Business Function is the business function of the plant.
•
Headcount is the number of employees in the plant
•
Area is the area of the plant.
•
Area UOM is the unit of measure in which Area is expressed.
5.
Scroll down the page to view the following reports for each department in
the
plant:
•
Electricity Consumption
•
Electricity Cost
•
CO2 Emission
•
Production Value Analysis by Product
•
Trend
•

Electricity Consumption:
6-30

•
Department is the name of the department of the plant. You can click on a
department to view reports on the equipment in the department.
•
Business Function is the business function of the department
•
Area is the area of the department.
•
Headcount is the number of employees working in the department.
•
Direct Actual Consumption- Period to Date is the actual electricity
consumed
by the department in a specific time period for production purposes.
•
Indirect Actual Consumption- Period to Date is the actual electricity
consumed
by the department in a specific time period for non-production purposes.
For
example, lighting, air-conditioning, and water treatment systems.
•
Total Actual Consumption – Period to Date is the sum of Direct and
Indirect
Actual Consumption.
•
Plan Consumption- Period to Date is the planned electricity to be
consumed by
the department.
•
Last Year Consumption – Period Date is the electricity consumed by the
department in the same time period of the previous year.
•
% Change (Plan) is the percentage deviation of actual consumption from
planned electricity consumption by the department. A red flag displays
when
the value is more than zero.
•
% Change (Last Year) is the percentage deviation of actual electricity
usage by
the department in the period of the current year from that of the last
year. A red
flag displays when the value is more than zero.
•
Actual Consumption Per Unit Area is the actual electricity consumed per
unit
area of the department.
•
Actual Consumption Per Person is the actual electricity consumed per
person in
the department.
•
Electricity Consumption UOM is the unit of measure in which electricity
consumption is expressed.
•

Area UOM is the unit of measure in which the department area is
expressed.
Electricity Cost:
•
Actual Cost -Period to Date is the cost of actual electricity consumed by
the
department in a specific time period.
31

•
Plan Cost- Period to Date is the cost of planned electricity to be
consumed by
the department in a specific time period.
•
Last Year Cost – Period Date is the cost of electricity consumed by the
department in the same time period of the previous year.
•
% Change (Plan) is the percentage deviation of cost of actual electricity
consumption from planned electricity consumption by the department. A red
•
% Change (Last Year) is the percentage deviation of cost of actual
electricity
usage by the department in the period of the current year from that of
the last
year. A red flag displays when the value is more than zero.
•
Actual Cost Per Unit Area is the cost of actual electricity consumed per
unit
area of the department.
•
Actual Cost Per Person is the cost of actual electricity consumed per
person in
the department.
CO2 Emission
•
Actual Emission-Period to Date is the carbon emission based on
electricity
consumption by the department in a specific time period.
•
Plan Emission-Period to Date is planned emissions based on electricity
consumption by the department.
•
Last Year Emission-Period Date is emission based on electricity consumed
by
the department in the same time period of the previous year.
•
% Change (Plan) is the percentage deviation of actual from planned
emissions
by the department. A red flag displays when the value is more than zero.
•
% Change (Last Year) is the percentage deviation of actual emission by
the
department in the period of the current year from that of the last year.
A red
•
Actual Emission Per Unit Area is the actual emission per unit area of the
department.
•
Actual Emission Per Person is the emission per person in the department.
6-32

12 1-man-operation center-ug(2)

Production Value Analysis by Product:
The Production Value Analysis by Product report provides information on
the
actual electricity consumed, cost of electricity consumed, and carbon
emissions due
to the consumption per production output of the department.
•
Product is the product name.
•
Production Value is the value of the produced product.
•
Actual Electricity Consumption-Period to Date is the actual electricity
consumed for producing the product.
•
Actual Electricity Cost-Period to Date is the cost of the actual
electricity
consumed for producing the product.
•
Actual CO2 Emission – Period to Date is carbon emission based on
electricity
consumption by the department in a specific time period.
•
Actual Electricity Consumption per Unit Production Value is the actual
electricity consumed by the department for the production of the value of
one
unit of production output.
33

•
Actual Electricity Cost Per Unit Production Value is the cost of actual
electricity
consumed by the department for the production of the value of one unit of
production output.
•
Actual CO2 Emission Per Unit Production Value is the CO2 emission based
on
actual electricity consumed by an entity for the production of the value
of one
unit of production output.
•
Electricity Consumption UOM is the unit of measure in which the
electricity
consumption is expressed.
•
CO2 Emission UOM is the unit of measure in which the CO2 emission is
expressed.
•
Currency UOM is the currency in which the Production Value is expressed.
Trend:
The Trend graph report provides a graphical representation of the
electricity
consumption, electricity cost, and CO2 emission for:
•
All departments in a plant by the Trend by Period-All Departments report.
•
Each department in a plant by the Trend by Period-By Department report
To view the trend graph report, select the report you want to view in the
Measure
field from the following options.
•
•
Electricity Consumption Per Unit Area
•
Electricity Consumption Per Person
•
Electricity Cost
•
Electricity Cost Per Unit Area
•
Electricity Cost Per Person
•
CO2 Emission
6-34

• CO2 Emission Per Unit Area
• CO2 Emission Per Person
Ranking and Distribution:
The Ranking and Distribution report provides a graphical representation
of the
department rankings and distributions based on electricity consumption,
cost, and
CO2 emission.
To view the Ranking and Distribution report select any one of the
following KPIs in
the Measure field for which you want to view the report:
• Electricity Consumption
• Electricity Consumption Per Unit Area
• Electricity Consumption Per Person
• Electricity Cost
• Electricity Cost Per Unit Area
• Electricity Cost Per Person
• CO2 Emission
• CO2 Emission Per Unit Area
• CO2 Emission Per Person
Site Ranking report displays the top five departments in the descending
order for
the selected measure.
Distribution by Department report displays the distribution of the
selected measure
across all departments of the plant.
Distribution by Usage Category displays the distribution of the selected
measure
across various usage categories for all departments at the plant, for
example,
35

electricity consumption for air conditioning, lighting, production
equipment etc.
Sustainability Performance by Equipment
You can view the electricity consumption, electricity cost, and carbon
emission for all
equipments in a department using the Sustainability Performance by
Equipment page.
To view the sustainability performance by equipment page:
1.
Navigate to the Sustainability Performance page.
2.
Select a department from the Department column of the Electricity
Consumption
report. The Sustainability Performance page by Equipment displays. You
can also
change the time period and the Department for which you want to view the
report
or select All Choices to view the reports for all departments.
3.
The following reports display:
•
Distribution and Trend region displays the following graph reports:
•
Distribution by Usage Categories graph provides the distribution of the
selected measure across various usage categories for all equipment in the
department. You can choose to view the report for the Measures,
Electricity
Consumption, CO2 Emission, and Electricity Cost.
•
Trend by Period- By Equipment graph provides the trend in electricity
consumption, CO2 emission, and electricity cost by all equipments in a
department over a specific time period.
6-36

•
Department Summary region displays the following information for the
department:
•
Equipment is the name of the equipment.
•
Department is the department in which the equipment is present.
•
Scrap % is the percentage of scrap expected for equipment.
•
Total Electricity Consumption is the actual electricity consumed by the
equipment in the RUN, IDLE, DOWN, and OFF statuses.
•
Value Added Electricity Consumption is the actual electricity consumed by
the equipment in the RUN status.
•
Non- Value Added Electricity Consumption is the electricity consumed by
the equipment in the IDLE, DOWN, or OFF statuses.
•
Value Added Electricity % is the percentage of the Value Added
Consumption per Total consumption for an entity.
•
CO2 Emission is the actual CO2 emission by the equipment.
•
Overall Equipment Effectiveness is calculated by multiplying Availability
Ratio, Performance Ratio, and First Pass Yield for an equipment.
Sustainability Performance Equipment Hourly Summary Page
You can view the electricity consumption, electricity cost, equipment
output, and
37

carbon emission for hourly time periods for equipment in a plant using
the
Sustainability Performance Equipment Hourly Summary Page.
To view the sustainability performance equipment hourly summary page:
1.
Navigate to the Sustainability Performance tab. The Sustainability
Performance by
Department displays.
2.
Select a department from the Department column of the Electricity
Consumption
report. The Sustainability Performance page by Equipment displays.
3.
Select equipment in the Equipment Summary report. The Sustainability
Performance by Equipment Hourly Summary displays. You can also change the
time period and the Equipment for which you want to view the reports or
select All
Choices to view the reports for all equipments.
4.
The following reports display for the equipment:
•
Electricity Consumption Trend report is a graphical representation of the
trend
in electricity consumption of the equipment in hourly time intervals.
•
Equipment Output Trend report is a graphical representation of the trend
in
output production and the scrap quantity recorded for the equipment
during
shifts.
• Parameter Monitoring report is a graphical representation of the
measures of
parameters like temperature and pressure over hourly time periods.
6-38

•
Equipment Status Trend is a graphical representation of the trend in
which an
equipment is in Idle, Run, Down, and Off statuses over hourly time
periods.
You can choose to display a Bar or Area Graph.
•
Equipment Summary report is a tabular representation of the durations for
which the equipment is in the Idle, Run, Down and Off statuses over
hourly
time periods.
Sustainability Performance Equipment Hourly Detail Page
You can view the detailed information on electricity consumption,
electricity cost,
equipment output, and carbon emission for an equipment in a specific
hourly time
period using the Sustainability Performance Equipment Hourly Detail Page.
39

To view the Sustainability Performance Equipment Hourly Detail page:
1.
Navigate to the Equipment Summary region of the Equipment Hourly Summary
page.
2.
Click the From Time to view the equipment detail reports for the
equipment within
a specific hour. The Equipment Hourly Detail page appears.
3.
The following reports display for the equipment within the selected hour:
•
Electricity Consumption Detail Trend graphically displays the electricity
consumption by the equipment within the selected hour.
•
CO2 Emission Detail Trend graphically displays the carbon emission by the
equipment within the selected hour.
•
Equipment Status Trend graphically displays the times for which the
equipment is in the Up, Idle, Down, and Off Statuses within the selected
hour.
•
Production Output Trend graphically displays the product output quantity
and
scrap quantity produced by the equipment within the selected hour.
6-40

Facilities Manager Dashboard
Overview of the Facilities Manager Dashboard
Oracle Manufacturing Operations Center provides new capabilities to
accelerate
sustainability improvements of companies focusing on manufacturing,
innovation, or
services.
Oracle Manufacturing Operations Center can directly connect to smart
meters and
environmental management systems to collect real time energy consumption
and green
house gases emission data in both manufacturing and non-manufacturing
facilities of
enterprises across all industries.
The Sustainability Sensor Data Management system of Oracle MOC provides
the
Facilities Manager dashboard with built-in Key Performance Indicators
(KPIs) that help
you:
•
Monitor and analyze energy consumption, energy cost, and carbon
emissions.
•
Identify specific opportunities for improving energy efficiency and
reducing carbon
emissions.
•
Directly integrate with smart meters, environmental management systems,
and
building automation systems, and collect energy consumption, and
emissions data.
•
Leverage as a certifiable data repository for reporting energy usage.
•
Upload data through spreadsheets at any desired frequency and at any
level of
granularity, in cases where energy information is not available through
meters or
other sensors.
The Facilities Manager dashboard and the integrated reports provide the
facility
manager with information on the electricity consumption, electricity
cost, and carbon
emissions at the following five seeded levels of a facility hierarchy:
•
Site
Facilities Manager Dashboard 7-1

•
Building
•
Floor
•
Floor Section
• Equipment
You can also define hierarchies based on your requirements.
Understanding the Summary Page
The Summary page displays the electricity consumption, electricity cost,
and carbon
emission for all the sites in an enterprise.
To view the Summary page:
1.
Navigate to the Facilities Manager dashboard using the Manufacturing
Operations
Center User responsibility. The Summary page displays.
2.
Year,
Quarter, Period, Week, and Date. All Choices displays as the default
value for all
the time period fields. Click Go. The following regions display for the
enterprise:
•
Site is the name of the site in the enterprise. You can click on a site
to view the
Site reports. Refer to the "Understanding Site Page" topic for a detailed
description of the site page.
•
Plan vs Actual-Period to Date is the difference in the planned
electricity
consumption and actual electricity in a specific time period. A dial
displays as
red when the difference is greater than zero and as green when the
difference is
lesser than or equal to zero
•
Business Function is the business function of the site.
•
Area is the area of the site.
•
Headcount is the number of employees working at the site
•
Actual Consumption- Period to Date is the actual electricity consumed by
the
site in a specific time period.
•

consumed by
the site for the time period.
•
site in
7-2

the same time period of the previous year.
•
planned electricity consumption by the site. A red flag displays when the
value
is more than zero.
•
usage by
the site in the period of the current year from that of the last year. A
red flag
displays when the value is more than zero.
•
unit
area of the site.
•
person in
the site.
•
is
consumed.
•
Area UOM is the unit of measure for the site area.
Electricity Cost
•
Actual Cost - Period to Date is the cost of the actual electricity
consumed by the
site in a specific time period.
•
consumed by
the site in a specific time period.
•
Last Year Consumption – Period Date is the cost of electricity consumed
by the
site in the same time period of the previous year.
•
consumption from planned electricity consumption by the site. A red flag
•
electricity

usage by the site in the period of the current year from that of the last
year. A
red flag displays when the value is more than zero.
•
unit
area of the site.
•
person in
the site.
CO2 Emission
•
Actual Emission-Period to Date is the carbon emission based on
electricity
consumption by the site in a specific time period.
•
Plan Emission- Period to Date is planned emissions based on electricity
consumption by the site.
•
Last Year Emission-Period Date is emission based on electricity consumed
by
the site in a specified period of the previous year.
•
emissions
by the site. A red flag displays when the value is more than zero.
•
the site
in the period of the current year from that of the last year. A red flag
displays
when the value is more than zero.
•
site.
•
Actual Emission Per Person is the emission per person in the site.
7-4

Trend
The Trend graph reports provide a graphical representation of the
electricity
consumption, electricity cost, and CO2 emission of all sites in an
enterprise and also
for each site of the enterprise for a specific time period.
To view the Trend Graph Report:
1.
Scroll down the Summary page. You can view the following reports:
• Trend by Period- All Sites displays the report for all sites of the
enterprise.
• Trend by Period- By Site displays the report for each site of the
enterprise.
2.
To view the Trend by Period- All Sites, select the Period for which you
want to view
the reports. Options are: Year, Quarter, Period, Week, and Date.
3.
Select the report you want to view in the Measure field. Options are:
Electricity
Consumption, Electricity Cost, and CO2 Emission.
4.
To view the Trend by Period- By Site, select the Period for which you
want to view
the reports. Options are: Year, Quarter, Period, Week, and Date.
5.
Select the report you want to view in the Measure field:
•
•
Electricity Cost
•
CO2 Emission

of the site
rankings and distributions based on electricity consumption, cost, and
CO2
emission.
To view the Ranking and Distribution report:
1.
Scroll down the Summary page to the Ranking and Distribution region.
Select any
one of the following KPIs in the Measure field for which you want to view
the
report:
•
•
•
•
Electricity Cost
•
•
•
CO2 Emission
•
CO2 Emission Per Unit Area
•
CO2 Emission Per Person
2.
The Site Ranking report displays the top five sites in a descending order
for the
selected measure.
3.
The Distribution by Site report displays the distribution of the selected
measure
across all sites of the enterprise.
4.
The Distribution by Usage Category displays the distribution of the
selected
7-6

measure across various usage categories at all sites, for example,
electricity
consumption for air conditioning, lighting, production equipment etc.
Understanding the Site Page
The Site page displays the electricity consumption, electricity cost, and
carbon emission
for all the buildings of a site. You can also choose to view information
for a single
building.
To view the Site page:
1.
Operations
2.
Select the Site tab or click on a site in the Site field of the Summary
page. The Site
page appears.
3.
Select the time period for which you want to view the details. Options
are: Year,
Quarter, Period, Week, and Date. Year displays the current year by
default. All
Choices displays as the default value for Quarter, Period, Week, and Date
time
periods.
4.
Select the Site for which you want to view reports. A list of sites from
the Site
Master displays. If you navigate to the site page using the Site tab,
then the first Site
in ascending alphabetical order of Site names displays as the default
value.
5.
Select the Building for which you want to view report from a list of
buildings of the
site.
6.
Click Go. The header region of the page displays the following Site
Characteristics:
•
Building
•
Business Function is business function of the building.
•
Area is the area of the building.

•
Headcount is the number of employees working in the building.
7.
The following information displays for a site:
•
the
building in a specific time period.
•
consumed by
the building in the specific time period.
•
building in the same time period of the previous year.
•
planned electricity consumption by the building. A red flag displays when
the
value is more than zero.
•
usage by
the building in the period of the current year from that of the last
year. A red
•
unit
area of the building.
•
person in
the building.
•
is
consumed.
•
Area UOM is the unit of measure for the building area.
Electricity Cost
•
Actual Cost-Period to Date is the cost of the actual electricity consumed
by the
•
Plan Cost-Period to Date is the cost of planned electricity to be
consumed by the
•

Last Year Consumption-Period Date is the cost of electricity consumed by
the
building in the same time period of the previous year.
•
consumption from planned electricity consumption by the building. A red
flag
7-8

•
electricity
usage by the building in the period of the current year from that of the
last year.
A red flag displays when the value is more than zero.
•
unit
area of the building.
•
person in
the building.
CO2 Emission
•
Actual Emission - Period to Date is the carbon emission based on
electricity
consumption by the building in a specific time period.
•
consumption by the building.
•
Last Year Emission – Period Date is emission based on electricity
consumed by
the building in a specified period of the previous year.
•
emissions
by the building. A red flag displays when the value is more than zero.
•
the
building in the period of the current year from that of the last year. A
red flag
•
building.
•
Actual Emission Per Person is the emission per person in the building.
Trend Graph Reports
electricity
consumption, electricity cost, and CO2 emission of all buildings at a
site and also
for each building of the site for a specific time period.
1.
Navigate to the Site page. You can view the following reports:

• Trend by Period- All Buildings displays the report for all buildings of
the site.
• Trend by Period- By Building displays the report for each building of
the site.
2. To view the Trend by Period- All Buildings and Trend by Period-By
Building

reports, select the Period for which you want to view the reports.
Options are: Year,
Quarter, Period, Week, and Date.
3.
•
•
•
•
Electricity Cost
•
•
•
CO2 Emission
•
•
of the
building rankings and distributions based on electricity consumption,
cost, and
CO2 emission.
1.
Navigate to the Site page.
2.
Scroll down to the Ranking and Distribution page. Select any one of the
following
KPIs in the Measure field for which you want to view the report:
•
•
•
•
Electricity Cost
•
•
•
CO2 Emission

•
•
3.
The Building Ranking report displays the top five buildings in a
descending order
for the selected measure.
4.
The Distribution by Building report displays the distribution of the
selected
measure across all buildings of the site.
5.
selected
measure across various usage categories for all the buildings at the
site, for
example, electricity consumption for air conditioning, lighting,
production
equipment etc.
Understanding the Building Page
The Building page displays the electricity consumption, electricity cost,
and carbon
emission for all the floors in a building. You can also choose to view
information for a
single floor.
To view the Building page:
1.
Operations
2.
Select the Building tab or click on a building in the Building field of
the Site page.
The Building page appears.
3.
Year,
default. All
time
periods.
4.
Select the Site, Building, and Floor for which you want to view reports.
All the
floors in the building display in the list of values of the Floor field.
5.
Click Go. The header region of the page displays the Building
Characteristics. The
following information displays for the building:

•
Building
•
Business Function is business function of the floor.
•
Area is the area of the floor.

•
Area UOM is the unit of measure in which the building area is expressed.
•
Headcount is the number of employees working on the floor.
•
Floor is the name of the floor.
•
the
floor in a specific time period.
•
consumed by
the floor in the specific time period.
•
floor in
the same time period of the previous year.
•
planned electricity consumption by the floor. A red flag displays when
the
value is more than zero.
•
usage by
the floor in the period of the current year from that of the last year. A
red flag
•
unit
area of the floor.
•
person in
the floor.
Electricity Cost
•
Actual Cost - Period to Date is the cost of the actual electricity
consumed by the
floor in a specific time period.
•
consumed by
the floor in a specific time period.
•
by the
floor in the same time period of the previous year.
•

consumption from planned electricity consumption by the floor. A red flag
•
electricity
usage by the floor in the period of the current year from that of the
last year. A
7-12

red flag displays when the value is more than zero.
•
unit
area of the floor.
•
person in
the floor.
CO2 Emission
•
Actual Emission -Period to Date is the carbon emission based on
electricity
consumption by the floor in a specific time period.
•
consumption by the floor.
•
consumed by
the floor in a specified period of the previous year.
•
emissions
by the floor. A red flag displays when the value is more than zero.
•
the floor
in the period of the current year from that of the last year. A red flag
displays
when the value is more than zero.
•
floor.
•
Actual Emission Per Person is the emission per person in the floor.
Trend
electricity
consumption, electricity cost, and CO2 emission of all floors at a
building and also
for each floor of the building for a specific time period.
1.
Scroll down to the Trend region. You can view the following reports:
• Trend by Period- All Floors displays the report for all floors of the
building.
• Trend by Period- By Floor displays the report for each floor of the
building.

2.
To view the Trend by Period- All Floors and Trend by Period-By Floor
reports,
select the Period for which you want to view the reports. Options are:
Year,

3.
•
•
•
•
Electricity Cost
•
•
•
CO2 Emission
•
•
of the
floor rankings and distributions based on energy consumption, cost, and
CO2
emission.
1.
following
•
•
•
•
Electricity Cost
•
•
•
CO2 Emission
•
•
7-14

2.
The Building Ranking report displays the top five floors in a descending
order for
the selected measure.
3.
The Distribution by Building report displays the distribution of the
selected
measure across all floors of the building.
4.
selected
measure across various usage categories at all floors of the building,
for example,
electricity consumption for air conditioning, lighting, production
equipment etc.
Understanding the Floor Page
The Floor page displays the electricity consumption, electricity cost,
and carbon
emission for all the floor sections on a floor. You can also choose to
view information for
a single floor section.
To view the Floor page:
1.
Operations
2.
Select the Floor tab or click on a floor in the Floor field of the
Building page. The
Floor page appears.
3.
Year,
default. All
time
periods.
4.
Select the Site, Building, Floor, and Floor Section for which you want to
view
reports. All the floor sections of the floor display in the list of
values of the Floor
Section field.
5.
Click Go. The header region of the page displays the Floor
Characteristics. The
following information displays for the building:
•
Floor
•

Business Function is business function of the floor.
•
Area is the area of the floor.
•
Area UOM is the unit of measure in which the floor area is expressed.
•
Headcount is the number of employees working on the floor.

•
Floor Section is the name of the floor section.
•
the
floor section in a specific time period.
•
consumed by
the floor section in the specific time period.
•
floor
section in the same time period of the previous year.
•
planned electricity consumption by the floor section. A red flag displays
when
•
usage by
the floor section in the period of the current year from that of last
year. A red
•
unit
area of the floor section.
•
person in
the floor section.
Electricity Cost
•
Actual Cost -Period to Date is the cost of the actual electricity
consumed by the
floor section in a specific time period.
•
consumed by
the floor section in a specific time period.
•
by the
floor section in the same time period of the previous year.
•
consumption from planned electricity consumption by the floor section. A
red
•

electricity
usage by the floor section in the period of the current year from that of
the last
year. A red flag displays when the value is more than zero.
•
unit
area of the floor section.
7-16

•
person in
the floor section.
CO2 Emission
•
Actual Emission - Period to Date is the carbon emission based on
electricity
consumption by the floor section in a specific time period.
•
consumption by the floor section.
•
consumed by
the floor section in a specified period of the previous year.
•
emissions
by the floor section. A red flag displays when the value is more than
zero.
•
the floor
section in the period of the current year from that of the last year. A
red flag
•
floor
section.
•
Actual Emission Per Person is the emission per person in the floor
section.
Trend
electricity
consumption, electricity cost, and CO2 emission of all floors sections on
a floor and
also for each floor section of the floor for a specific time period.
1.
•
Trend by Period- All Floor Sections displays the report for all floor
sections of
the floor.
•
Trend by Period- By Floor section displays the report for each floor
section of

the floor.
2.
To view the Trend by Period- All Floor Sections and Trend by Period – By
Floor
Section reports, select the Period for which you want to view the
reports. Options
are: Year, Quarter, Period, Week, and Date.
3.

•
•
Electricity Cost
•
CO2 Emission
of the
floor section rankings and distributions based on energy consumption,
cost, and
CO2 emission.
1.
following
•
•
•
•
Electricity Cost
•
•
•
CO2 Emission
•
•
2.
The Floor Ranking report displays the top five floors in a descending
order for the
selected measure.
3.
The Distribution by Floor report displays the distribution of the
selected measure
across all floors of the building.
4.
selected
measure across various usage categories on all the floor sections of the
floor, for
production
equipment etc.

Understanding the Floor Section Page
The Floor Section page displays the electricity consumption, electricity
cost, and carbon
emission for all equipments in a floor section. You can also choose to
view information
for single equipment.
To view the Floor Section page:
1.
Operations
2.
Select the Floor Section tab or click on a floor section in the Floor
Section field of the
Floor page. The Floor Section page appears.
3.
Year,
default. All
time
periods.
4.
Select the Site, Building, Floor, Floor Section, and Equipment for which
you want to
view reports. All the equipment on the floor section display in the list
of values of
the Equipment field.
5.
Click Go. The header region of the page displays the Floor Section
Characteristics.
The following information displays for the floor section:
•
Floor Section
•
Business Function is business function of the floor section.
•
Area is the area of the floor section.
•
Area UOM is the unit of measure in which the floor section area is
expressed.
•
Headcount is the number of employees working on the floor section.
Equipment Summary
•
Equipment is the name of the equipment.
•
the

equipment in a specific time period.
•
consumed by
the equipment in the specific time period.
•

equipment in the same time period of the previous year.
•
planned electricity consumption by the equipment. A red flag displays
when
•
usage by
the equipment in the period of the current year from that of the last
year. A red
•
Actual Emission -Period to Date is the carbon emission based on
electricity
consumption by the equipment in a specific time period.
•
consumption by the equipment.
•
consumed by
the equipment in a specified period of the previous year.
Trend
electricity
consumption, electricity cost, and CO2 emission of all equipments on a
floor and
also for a single equipment of the floor section for a specific time
period.
To view the Trend Report:
1.
•
Trend by Period- All Equipments displays the report for all equipments of
the
floor section.
•
Trend by Period- By Equipment displays the report for an equipment of the
floor section.
2.
To view the Trend by Period- All Equipments and Trend by Period – By
Equipment
reports, select the Period for which you want to view the reports.
Options are: Year,
3.
•

•
Electricity Cost
•
CO2 Emission
7-20

of the
equipment rankings and distributions based on energy consumption, cost,
and CO2
emission.
1.
following
•
•
Electricity Cost
•
CO2 Emission
2.
The Equipment Ranking report displays the top five equipments in a
descending
order for the selected measure.
3.
The Distribution by Equipment report displays the distribution of the
selected
measure across all equipments of the floor section.
4.
selected
measure across various usage categories for all equipments on a floor
section, for
production
equipment etc.
Equipment Hourly Summary Page
You can view the electricity consumption, electricity cost, equipment
output, and
carbon emission for hourly time periods for equipment using the Equipment
Hourly
Summary Page.
To view the Equipment Hourly Summary page:
1.
Navigate to the Equipment Summary region of the Floor Section page. Click
in the
Equipment field to view reports for an equipment. The Equipment Hourly
Summary page appears.
2.
Select the report you want to view using the following options for time
and entity:
•
Year, Quarter, Period, Week, and Date

•
Site, Building, Floor, Floor Section, and Equipment
3.
The following reports display for the equipment:

• Electricity Consumption Trend report is a graphical representation of
the trend
in electricity consumption of the equipment in hourly time intervals.
•
Parameter Monitoring report is a graphical representation of the measures
of
parameters like temperature and pressure over hourly time periods.
To view the report:
•
Select Actual as Temperature or Pressure
•
Select Specification as Temperature or Pressure. If you select Actual as
Pressure, then you must also select the Specification as Pressure. The
graph
report displays the values of measured parameter over specified time
periods with respect to the graphs of the Upper and Lower limits of the
specifications. Refer to the topic "Creating Attribute Groups" in the
Oracle
Manufacturing Operations Center Implementation Guide for more information
on specifications.
7-22

•
Equipment Status Trend is a graphical representation of the trend in
which an
equipment is in Idle, Run, Down, and Off statuses over hourly time
periods.
You can choose to display a Bar or Area Graph.
•
Equipment Summary report is a tabular representation of the durations for
which the equipment is in the Idle, Run, Down and Off statuses over
hourly
time periods.
The report displays the following information:
•
From Time and To Time is the hourly time period
•
Run Time (Hrs) is the time in hours for which the equipment is in Run
status.
•
Idle Time (Hrs) is the time in hours for which the equipment is in Idle
status.

•
Down Time (Hrs) is the time in hours for which the equipment is in Down
status.
•
Off Time (Hrs) is the time in hours for which the equipment is in Off
status.
•
Electricity Consumption is electricity consumed by the equipment for the
time range.
Equipment Hourly Detail Page
You can view the detailed information on electricity consumption,
electricity cost,
equipment output, and carbon emission for an equipment in a specific
hourly time
period using the Sustainability Performance Equipment Hourly Detail Page.
To view the Equipment Hourly Detail page:
1.
Navigate to the Equipment Summary region of the Equipment Hourly Summary
page.
2.
Click the From Time to view the equipment detail reports for the
equipment within
a specific hour. The Equipment Hourly Detail page appears.
3.
The following reports display for the equipment within the selected hour:
•
Electricity Consumption Detail Trend graphically displays the electricity
consumption by the equipment within the selected hour.
•
CO2 Emission Detail Trend graphically displays the carbon emission by the
equipment within the selected hour.
•
Equipment Status Trend graphically displays the times for which the
equipment is in the Up, Idle, Down, and Off Statuses within the selected
hour.
7-24

MOC and Oracle Enterprise Asset
Management (eAM) Integration
This chapter covers the following topics:
•
Overview
Overview
Oracle Manufacturing Operations Center (MOC) and Oracle Enterprise Asset
Management (eAM) integration provides effective coordination between
production
and maintenance departments to achieve greater utilization of equipment
on the shop
floor. This is achieved by the rapid exchange of information related to
equipment.
Examples include down or idle condition of equipment, or equipment
exceeding
control parameters. MOC initiates actions based on events and alerts
captured from
shop floor equipment and passes the actions to the specific roles, such
as the
Maintenance Supervisor. MOC also receives the expected and actual uptime
from the
maintenance department that assists the planner or scheduler to modify
the production
schedules according to equipment availability.
MOC and eAM integration:
•
Reduces reaction time between event occurrence and the action/response
•
Improves scheduling based on equipment availability
MOC and eAM integration supports:
•
Configuration and collection of eAM specific objects including meter
readings,
events, and alarms from actual equipment in MOC
•
Process integration between MOC and eAM to meet the principles of
Condition
Based Maintenance (CBM)
•
Dashboards and KPI's designed for maintenance specific users and roles
MOC and Oracle Enterprise Asset Management (eAM) Integration 8-1

• Manual or automatic actions based on events using Event Management
Framework
MOC and eAM integration is illustrated by the following process flow. It
illustrates the
integration of data coming from Shop floor devices using Event Management
Framework.
Data coming from shop floor is collected using the OPC server provided by
device
partners (Kepware, Matricon or ILS).
MOC processes the data internally and externally. Processing data
internally occurs
when the data is collected from the OPC server into MOC, and is then
processed.
Within MOC, rules are defined using Oracle Warehouse Builder (OWB)
pluggable
mapping to generate events and allow users to acknowledge and manually
trigger
actions from the role-based dashboard. External processing of data does
not involve
MOC, and actions occur outside the boundary of MOC. However, the actions
are the
same for both internal and external processed events.
Actions include creating work requests, and sending email or mobile alert
notifications.
8-2

Ad hoc Reports
Using Ad hoc Reports
Oracle Manufacturing Operations Center (MOC) enables you to build custom
reports
for analyzing process parameters like electricity consumption, pressure,
temperature,
etc. that are captured for equipments based on specifications setup.
Oracle MOC
provides the following seeded reports for ad hoc analysis and enables you
to analyze
electricity consumption and parameters like temperature or pressure for
single or
multiple entities in a specific time period or over multiple time
periods:
•
Single Entity Ad hoc Analysis Report
•
Multiple Entity Ad hoc Analysis Report
•
Compare Periods Ad hoc Analysis Report
Single Entity Ad hoc Analysis Report
The Single Entity Ad hoc Analysis report enables you to analyze
electricity
consumption with parameters, Temperature or Pressure for a single entity
and a single
time period.
To run a single entity ad hoc analysis report:
1.
Using the Manufacturing Operations Center User responsibility, click Ad
hoc
Analysis menu option. The Ad hoc Analysis page displays.
2.
In the Single Entity tab, enter the following fields:
•
From Date and To Date to specify the time period for which you want to
analyze the electricity consumption.
•
Entity Type. Options are: Building, Department, Equipment, Floor, Floor
Ad hoc Reports 9-1

Section, Resource, Resource Group, and Site.
•
Entity for which you want to analyze the electricity consumption. All
entities of
the selected entity type display.
•
Parameter as Temperature or Pressure.
3.
Click Go. The Electricity Consumption and Parameter Monitoring graphical
report
displays electricity consumption and the parameter recordings
Multiple Entities Ad hoc Analysis Report
The Multiple Entities Ad hoc Analysis report enables you to analyze
electricity
consumption or monitor temperature or pressure for multiple entities in a
specified
time period.
To run the Multiple Entities Ad hoc Analysis Report:
1.
hoc
2.
Select the Multiple Entities tab and enter the following fields:
•
From Date and To Date to specify the time period for which you want to
analyze the electricity consumption or monitor temperature or pressure.
•
•
Entities for which you want to analyze the electricity consumption or a
parameter. All entities of the selected entity type display.
•
Parameter as Temperature, Pressure, or Electricity Consumption.
3.
Click Go. The Electricity Consumption or Parameter Monitoring graphical
report
displays the electricity consumption or parameter readings for the
selected entities
for the specified time period.
Compare Periods Ad hoc Analysis Report
The Compare Period Ad hoc Analysis report enables you to analyze
electricity
consumption and monitor temperature and pressure for an entity for
multiple time
periods.
9-2

To run the Compare Periods Ad hoc Analysis Report:
1.
hoc
2.
Select the Compare Period tab and enter the following fields
•
Choose the time period. Options are Year, Quarter, Period, Week, and Day.
•
•
Entities for which you want to analyze the electricity consumption or a
parameter. All entities of the selected entity type display.
•
Parameter as Temperature, Pressure, or Electricity Consumption.
3.
Click Go. The Electricity Consumption or Parameter Monitoring graphical
report
displays the electricity consumption or parameter readings for the entity
in the
selected time period.
Ad hoc Reports 9-3

A
Navigation
Brackets ([ ]) indicate a button or link.
Page Name Navigation Path
Actual Meters Data Entry MOC User > Data Entry > Actual Meters Data Entry
Add Attribute Groups for Batch Operation MOC Administrator > Extensible
Attributes
Workbench > Batch Operations > [select Entity
Name link] > Classifications tab [Attribute
Groups] > [Add Attribute Groups]
Add Attribute Groups for Equipment MOC Administrator > Extensible
Attributes
Workbench > Equipment > [select Entity
Add Attribute Groups for Item MOC Administrator > Extensible Attributes
Workbench > Items > [select Entity Name link]
> Classifications tab [Attribute Groups] > [Add
Attribute Groups]
1

Add Attribute Groups for Others MOC Administrator > Extensible Attributes
Workbench > Others > [select Entity Name
link] > Classifications tab [Attribute Groups] >
[Add Attribute Groups]
Add Attribute Groups for Work Order MOC Administrator > Extensible
Attributes
Workbench > Work Orders > [select Entity
Add Pages for Batch Operation MOC Administrator > Extensible Attributes
Name link] > Classifications tab [Pages] >
[Add Pages for Batch Operation] > [Create
Page]
Add Pages for Equipment MOC Administrator > Extensible Attributes
[Add Pages for Equipment] > [Create Page]
Add Pages for Item MOC Administrator > Extensible Attributes
> Classifications tab [Pages] > [Add Pages for
Item] > [Create Page]
Add Pages for Others MOC Administrator > Extensible Attributes
link] > Classifications tab [Pages] > [Add
Pages for Others] > [Create Page]
Add Pages for Work Order MOC Administrator > Extensible Attributes
Workbench >Work Orders > [select Entity
[Add Pages for Work Order] > [Create Page]
Application Object Library Lookups Development Manager Responsibility >
Lookups
Asset Performance (OEE) MOC User > Manufacturing Operations
Center Analytics > Plant Manager Dashboard
A-2

Asset Performance (OEE) by Equipment MOC User > Manufacturing Operations
> [select a Bottom Performers Equipment
Gauge]
Attribute Group Details MOC Administrator > Extensible Attributes
Workbench > [select Entity type] > [select
Entity Name link] > Classifications tab
[Attribute Groups] > [Add Attribute Groups] >
[Display Name link]
Attribute Groups for Batch Operation MOC Administrator > Extensible
Attributes
Groups]
Attribute Groups for Equipment MOC Administrator > Extensible Attributes
Groups]
Attribute Groups for Item MOC Administrator > Extensible Attributes
>Classifications tab [Attribute Groups]
Attribute Groups for Others MOC Administrator > Extensible Attributes
link] > Classifications tab [Attribute Groups]
Attribute Groups for Work Order MOC Administrator > Extensible Attributes
Groups]
Batch Equipment Contextualization Update MOC Administrator > Setup >
Contextualization Setup > [select records] >
[Enter Context in Batch]
Batch Operations Segments Overview MOC User > Extensible Attributes Data
>
Batch Operations > [select an Entity Name
link] > Entity: Batch Operation select [Entity
Name link]
3

Batch Operation Pages MOC Administrator > Extensible Attributes
Name link] > Classifications tab [Page]
Batch Performance MOC User > Manufacturing Operations
> [Batch Performance]
Batch Performance Detail MOC User > Manufacturing Operations
> [Batch Performance] > Production Variance
by Product region > [select a Work Order
Quantity Variance Bar within bar graph]
Create Classification MOC Administrator > Extensible Attributes
Workbench > Others > [Create]
Downtime Reasons Entry MOC User > Tag Data Workbench >
Equipment Downtime Reasons > [select data
on Equipment Downtime Reason] > [select
records] > [Enter Downtime Reason]
Entity: Batch Operation MOC Administrator > Extensible Attributes
Workbench > Batch Operations
MOC User > Extensible Attributes Data >
Batch Operations
Entity: Batch Operation Classifications MOC Administrator > Extensible
Attributes
Workbench > Batch Operations > Entity: Batch
Operation > [select Entity Name link]
Entity: Equipment MOC Administrator > Extensible Attributes
Workbench > Equipment
Equipment
Entity: Equipment Classifications MOC Administrator > Extensible
Attributes
Workbench > Equipment > Entity: Equipment
> [select Entity Name link]
A-4

Entity: Item MOC Administrator > Extensible Attributes
Workbench > Items
Items
Entity: Item Classifications MOC Administrator > Extensible Attributes
Workbench > Items > Entity: Item > [select
Entity Name link]
Entity: Others MOC Administrator > Extensible Attributes
Workbench > Others
Others
Entity: Others Classifications MOC Administrator > Extensible Attributes
Workbench > Others > Entity: Others > [select
Entity Name link]
Entity: Work Order MOC Administrator > Extensible Attributes
Workbench > Work Orders
Work Orders
Entity: Work Order Classifications MOC Administrator > Extensible
Attributes
Workbench > Work Orders > Entity: Work
Order > [select Entity Name link]
Equipment Contextualization Setup MOC Administrator > Setup >
Contextualization Setup
Equipment Downtime Analysis MOC User > Manufacturing Operations
Gauge] > [Overall Equipment Effectiveness
Details Region] > [select a Machine
Availability Value]
5

Equipment Downtime Reasons MOC User > Manufacturing Operations
Gauge] > Overall Equipment Effectiveness
Details Region > [select Machine Availability
Value] > [select Actual Downtime Hours
value]
Equipment Downtime Reason MOC User > Tag Data Workbench >
Equipment Downtime Reasons
Equipment Downtime Reasons Entry MOC User > Tag Data Workbench >
Equipment Downtime Reasons > [Enter
Downtime Reason]
Equipment Downtime Reasons [View] MOC User > Tag Data Workbench >
Equipment Downtime Reasons > [select data
on Equipment Downtime Reason] > [select
records] > [View Reason]
Equipment Efficiency Analysis MOC User > Manufacturing Operations
Performance Value]
Equipment Efficiency Detail MOC User > Manufacturing Operations
Performance Value] > [select a Machine
Efficiency value]
Equipment Overview MOC User > Extensible Attributes Data >
Equipment > Entity: Equipment [select Entity
Name link]
Equipment Pages MOC Administrator > Extensible Attributes
Name link] > Classifications tab [Pages]
A-6

Equipment Reason Code Setup MOC Administrator > Equipment Reason
Code Setup
Equipment Scrap Analysis MOC User > Manufacturing Operations
Details Region] > [select a First Pass Yield
Value]
Equipment Scrap Reason MOC User > Tag Data Workbench >
Equipment Scrap Reasons
Equipment Scrap Reasons Entry MOC User > Tag Data Workbench >
Equipment Scrap Reasons > [Enter Scrap
Reason]
Equipment Scrap Reasons View MOC User > Tag Data Workbench >
Equipment Scrap Reasons > [select data on
Equipment Scrap Reason] > [select records] >
[View Reason]
Equipment Scrap Reasons MOC User > Manufacturing Operations
Details Region] > [select a First Pass Yield
Value] > [select a Scrapped Quantity value]
Event Setup MOC Administrator > Event Setup
Extensible Attributes Data MOC User > Extensible Attributes Data
Facilities Manager MOC User > Manufacturing Operations
Center Analytics > Facilities Manager
Items Overview MOC User > Extensible Attributes Data >
Items > [select an Entity Name link] > Entity:
Item [Entity Name link]
Item Pages MOC Administrator > Extensible Attributes
> Pages
7

Manual Contextualization MOC User >Tag Data Workbench > Manual
Contextualization
Manufacturing Operations Center Catalog MOC User > Manufacturing
Operations
Center Analytics > Manufacturing Operations
Center Catalog
Others Overview MOC User > Extensible Attributes Data >
Others > [select an Entity Name link] > Entity:
Others [select Entity Name link]
Others Pages MOC Administrator > Extensible Attributes
link] > Classifications tab [Pages]
Parameters MOC Administrator > Setup > Run Requests >
Submit Request
Plant Manager Dashboard MOC User > Manufacturing Operations
Production Loss Analysis MOC User > Manufacturing Operations
Gauge] > [Production Loss Analysis]
Production Loss Detail MOC User > Manufacturing Operations
Gauge] > [Production Loss Analysis] > [select
a Total Production Loss value]
Production Performance MOC User > Manufacturing Operations
> [Production Performance]
Production Slippage Trend MOC User > Manufacturing Operations
> [Production Performance]
Scrap Reason MOC User > Tag Data Workbench > Scrap
Reasons
A-8

Scrap Reasons Entry MOC User > Tag Data Workbench >
[Enter Scrap Reason]
Scrap Reasons [View] MOC User > Tag Data Workbench >
[View Reason
Sustainability Performance MOC User > Manufacturing Operations
> Sustainability Performance
Tag Mapping MOC Administrator > Entity Hierarchy Home
Page > Equipment Setup> Tag Mapping
Tag Setup MOC Administrator > Setup > Tag Setup
Update Classification MOC Administrator > Extensible Attributes
Workbench > Others > Entity: Others [select
Entity Name link] > [Update]
Update Equipment Event Action Sequentially MOC Administrator > Event
Setup > [Update
Sequentially]
Update Equipment Reason Code Sequentially MOC Administrator > Equipment
Reason
Code Setup > [Update Sequentialy]
Work Orders Order Type MOC User > Extensible Attributes Data >
Work Orders > Entity: Work Order [select
Entity Name link] > Order Type
Work Orders Overview MOC User > Extensible Attributes Data >
Work Orders > Entity: Work Order [select
Entity Name link]
Work Order Pages MOC Administrator > Extensible Attributes
Name link] > Classifications tab [Pages]
9

12 1-man-operation center-ug(2)

More Related Content

Similar to 12 1-man-operation center-ug(2) (20)

Recently uploaded (20)

12 1-man-operation center-ug(2)