Difference between OSI Layer & TCP/IP Layer

Difference between OSI & TCP/IP Model
Difference between OSI Layer & TCP/IP Layer
TCP/IP OSI
It has 4 layers. It has 7 layers.
TCP/IP Protocols are considered to be standards
around which the internet has developed.
OSI Model however is a "generic, protocol-
independent standard."
Follows Vertical Approach Follows Horizontal Approach
In TCP/IP Model, Transport Layer does not
Guarantees delivery of packets.
In OSI Model, Transport Layer Guarantees
delivery of packets.
Network Layer in TCP/IP Model provides only
Connectionless service.
Network Layer in OSI Model provides both
Connection-Oriented & Connection less service.
Replacing Protocol is not easy. Protocols are hidden in OSI model & are easily
replaced as the technology changes.
TCP/IP protocols are the standards around which
the internet was developed therefore it mainly
gains creditability due to this reason.
Where as in contrast networks are not usually
built around the OSI model as it is merely used as
a guidance tool.
Not found in TCP/IP model. In TCP/IP, its
characteristics are provided by the TCP protocol.
The Session layer permits two parties to hold
ongoing communications called a session across a
network.
The TCP/IP network model represents reality in
the world.
Whereas the OSI mode represents an ideal.
Combines the session and presentation layer in
the application layer.
Has separate session and presentation layer.
Protocols were developed first and then the
model was developed.
Model was developed before the development of
protocols.
Protocol dependent standard. Protocol independent standard.
TCP/IP Model
The Internet Protocol Suite, popularly known as the TCP/IP model, is a communication protocol that is
used over the Internet. This model divides the entire networking functions into layers, where each layer
performs a specific function.
This model gives a brief idea about the process of data formatting, transmission, and finally the
reception. Each of these functions takes place in the layers, as described by the model. TCP/IP is a four-
layered structure, with each layer having their individual protocol. Let us have a look at the four layers:
1. Link Layer: As the name suggests, this layer includes the physical and logical connections from
the host's link. It is also known as Network Access layer and Network Interface layer. It explains
how the data is transmitted from the host, through the network. The physical connectors like the
coaxial cables, twisted pair wires, the optical fiber, interface cards, etc., are a part of this layer.

This layer can be used to connect different network types like ATM, Token ring, Ethernet, LAN,
etc.
2. Internet Layer: This layer is also known as the Network Layer. The main function of this layer
is to route the data to its destination. The data that is received by the link layer is made into data
packets (IP datagrams). The data packets contain the source and the destination IP address or
logical address. These packets are sent on any network and are delivered independently. This
indicates that the data is not received in the same order as it was sent. The protocols at this layer
are IP (Internet Protocol), ICMP (Internet Control Message Protocol), etc.
3. Transport Layer: This layer is responsible for providing datagram services to the Application
layer. This layer allows the host and the destination devices to communicate with each other for
exchanging messages, irrespective of the underlying network type. Error control, congestion
control, flow control, etc., are handled by the transport layer. The protocol that this layer uses is
TCP (Transmission Control Protocol) and UDP (User Datagram Protocol). TCP gives a reliable,
end-to-end, connection-oriented data transfer, while UDP provides unreliable, connectionless
data transfer between two computers.
4. Application Layer: It provides the user interface for communication. This is the layer where
email, web browsers or FTP run. The protocols in this layer are FTP, SMTP, HTTP, etc.
Figure 1: Difference between OSI Layer & TCP/IP Layer

OSI Model
The Open Systems Interconnected (OSI) model divides the network into seven layers and explains the
routing of the data from source to destination. It is a theoretical model which explains the working of
the networks. It was developed by the International Organization for Standardization (ISO) for their
network suite. Here are the details of OSI's seven layers:
1. Physical Layer: As the name suggests, this is the layer where the physical connection between
two computers takes place. The data is transmitted via this physical medium to the destination's
physical layer. The popular protocols at this layer are Fast Ethernet, ATM, RS232, etc.
2. Data Link Layer: The main function of this layer is to convert the data packets received from
the upper layer into frames, and route the same to the physical layer. Error detection and
correction is done at this layer, thus making it a reliable layer in the model. It establishes a logical
link between the nodes and transmits frames sequentially.
3. Network Layer: The main function of this layer is to translate the network address into
physical MAC address. The data has to be routed to its intended destination on the network. This
layer is also responsible to determine the efficient route for transmitting the data to its
Figure 2 Packet Data Unit

destination. While doing so, it has to manage problems like network congestion, switching
problems, etc. The protocols used here are IP, ICMP, IGMP, IPX, etc.
4. Transport Layer: This layer provides end-to-end delivery of data between two nodes. It
divides data into different packets before transmitting it. On receipt of these packets, the data is
reassembled and forwarded to the next layer. If the data is lost in transmission or has errors,
then this layer recovers the lost data and transmits the same.
5. Session Layer: This layer is responsible to establish and terminate connections between two
communicating machines. This connection is known as a session, hence the name. It establishes
full-duplex, half-duplex and simplex connection for communication. The sessions are also used to
keep a track of the connections to the web server.
6. Presentation Layer: The data conversion takes place at this layer. The data that it receives
from the application layer is converted into a suitable format that is recognized by the computer.
For example, the conversion of a file from .wav to .mp3 takes place at this layer.
7. Application Layer: This layer provides a user interface by interacting with the running
application. E-mail, FTP, web browsers, etc. are the network applications that run on this layer.
The entire communication industry stands on the backbone of TCP/IP and OSI reference model. It is
absolutely vital to learn the above differences, if anyone wants to be an expert in the field of
communication.

Difference between OSI Layer & TCP/IP Layer

Recommended

More Related Content

What's hot (20)

Viewers also liked (20)

Similar to Difference between OSI Layer & TCP/IP Layer (20)

More from Netwax Lab (20)

Recently uploaded (20)

Difference between OSI Layer & TCP/IP Layer