16.LECTURE-Solid_waste_management (1).pptx

SOLID WASTE
Types of waste:
Biodegradable waste: food and kichen waste, green waste, paper (can be recycled);
Recyclable material: paper, glass bottles, cans, metals, certain plastics, etc.;
Inert waste: construction and demolition waste, dirt, rocks, debris;
Composite wastes: waste closing, Tetra Packs, waste plastics such as toys;
Domestic hazardous waste (household hazardous waste) & toxic waste :
• medication,
• e-waste,
• paints,
• chemicals,
• light bulbs,
• fluorescent tubes,
• spray cans,
• fertilizer and pesticide and containers,
• batteries,
• shoe polish materials.
2
5

Waste is solid substances generated as a result of human activities, and, being no longer
of value for the respective economic, physiological or technological process, are
removed from it.
Solid waste in a broader sense is understood as any household, industrial and
agricultural materials that have been used up.
Since such waste accumulates in the territories managed by municipalities responsible
for its removal and storage, it is termed ‘municipal solid waste’.
SOLID WASTE
As other of the municipal solid waste are:
ash
generated in thermal
or electric power
plants
sludge from
wastewater treatment
plants
animal
farm waste
gangue rocks
3
5
from mineral
extraction
Sometimes these types of waste require separate sectors in landfills.

BIODEGRADABLE WASTE
 Biodegradable waste is a type of waste, typically
originating from plant or animal sources, which may be
degraded by other living organisms.
Waste that cannot be broken down by other living
organisms are called non-biodegradable.
 Biodegradable waste can be commonly found in
municipal solid waste (sometimes called biodegradable
municipal waste, or BMW) as green waste, food waste,
paper waste, and biodegradable plastics.
 Other biodegradable wastes include human waste,
manure, sewage, sloughterhouse waste.
In the absence of oxygen much of this waste will decay
to methane by anaerobic digestion.
5

BIODEGRADABLE WASTE
 Biodegradable waste can often be used for
composting or must doubtless be a resource for
heat, electricity and fuel.
 This produces additional biogas and still delivers
the compost for the soil. It might be a fully
developed system and produced millions Kwh of
electricity.
 The oldest of the companies own lorries has
achieved 1.000.000 kilometes driven with biogas
from household waste in the last 15 years.
6

BIOGAS
Biogas typically refers to a gas produced by the biological breakdown of organic
matter in the absence of oxygen. Organic waste such as dead plant and animal
material, animal dung, and kitchen waste can be converted into a gaseous fuel
called biogas. Biogas originates from biogenic material and is a type of biofuel.
Biogas comprises primarily methane (CH4) and carbon dioxide (CO2) and may have
small amounts of hydrogen sulphide (H2S) and moisture.
The gases methane, hydrogen, and carbon monoxide can be combusted or oxidized
with oxygen. This energy release allows biogas to be used as a fuel.
Biogas can be used as a fuel in any country for any heating purpose, such as
cooking. It can also be used in anaerobic digesters where it is typically used in a
gas engine to convert the energy in the gas into electricity and heat.
Biogas can be compressed, much like natural gas, and used to power motor vehicles.
In the UK, for example, biogas is estimated to have the potential to replace around
17% of vehicle fuel.
Biogas is a renewable fuel, so it qualifies for renewable energy subsidies in some
parts of the world. Biogas can also be cleaned and upgraded to natural gas
standards when it becomes biomethane.
7

10
Biogas production in rural Germany.

GREEN
WASTE
11
Green waste is biodegradable waste that can be composed of garden or park waste1, such as grass or flower
cuttings and hedge (dzīvžoga) trimmings, as well as domestic and commercial food waste. The
differentiation green identifies it as high in nitrogen, as opposed to brown waste, which is primarily
carbonaceous.
Green waste is often collected in municipal curbside collection schemes or through private waste
management contractor businesses and subject to independent audit.

FOOD WASTE
Food waste or food loss is food that is discarded or lost uneaten. As of 2011, 1.3 billion tons of food, about one
third of the global food production, are lost or wasted annually. Loss and wastage occurs on all steps in the food
supply chain. In low-income countries most loss occurs during production, while in developed countries much
food – about 100 kilograms per person and year – is wasted at the consumption stage.
Apples (Granny Smith variety) are among the most wasted
foods in the UK - 190,000 tonnes per year are thrown a1w2ay
.
Limiting food wastage has seen the adoption of former WWI and II slogans.

FOOD LOSS AND WASTE
Food loss and waste per person
and year
Total, kg
At the production
and retail
stages, kg
By consumers,
kg
Europe 280 190 90
North America and Oceania 295 185 110
Industrialized Asia 240 160 80
Subsaharan Africa 160 155 5
North Africa, West and Central Asia 215 180 35
South and Southeast Asia 125 110 15
Latin America 225 200 25
Food loss measures the decrease in edible food mass (excluding inedible parts and seed),
that is, loss at the production, postharvest and processing stages. This definition of loss
includes biomass originally meant for human consumption but eventually used for some
other purpose, such as fuel or animal feed.
Food waste are food losses occurring during the retail and final consumption stage due to
the behaviour of retailers and consumers – that is, the throwing away of food.
11

CONSTRUCTION WASTE
Construction waste consists of unwanted material produced directly or
incidentally by the construction or industries.
This includes building materials such as insulation, nails, electrical
wiring, as well as waste originating from site preparation such as
dredging (bagarētie) materials, tree stumps, and rubble.
Construction waste may contain lead, asbestos, or other hazardous
substances.
Much building waste is made up of materials such as bricks, concrete
and wood damaged or unused for various reasons during
construction.
Observational research has shown that this can be as high as 10 to 15
% of the materials that go into a building, a much higher
percentage than the 2.5-5 % usually assumed by quantity surveyors
and the construction industry.
Since considerable variability exists between construction sites, there
is much opportunity for reducing this waste.
12

CONSTRUCTION WASTE
Certain components of construction waste such as plasterboards are
hazardous once landfilled. Plasterboard is broken down in landfill
conditions releasing hydrogen sulphide, a toxic gas.
There is the potential to recycle many elements of construction waste.
Often roll-off containers are used to transport the waste. Rubble
can be crushed and reused in construction projects. Waste wood
can also be recovered and recycled.
Government or local authorities often make rules about how much
waste should be sorted before it is hauled away to landfills or other
waste treatment facilities.
Some hazardous materials may not be moved, before the authorities
have ascertained that safety guidelines and restrictions have been
followed.
Among their concerns would be the proper handling and disposal of
such toxic elements as lead, asbestos or radioactive materials.
13

CONSTRUCTION WASTE
16
Polyurethane insulator material marked for
removal of the construction site. This
material is quite wasteful and
alternatives as compressed straw could
be better used instead.

THE FUNCTIONAL ELEMENTS OF SOLID WASTE
Waste generation - encompasses activities in which materials are identified as no
longer being of value and are either thrown out or gathered together for disposal.
Collection - the functional element of collection includes not only the gathering of
solid waste and recyclable materials, but also the transport of these materials, after
collection, to the location where the collection vehicle is emptied. This location
may be a materials processing facility, a transfer station or a landfill disposal site.
Waste handling and separation, storage and processing at the source - involves
activities associated with waste management until the waste is placed in storage
containers for collection. Handling also encompasses the movement of loaded
containers to the point of collection. Separating different types of waste
components is an important step in the handling and storage of solid waste at the
source.
Separation and processing and transformation of solid wastes - the types of
means and facilities that are now used for the recovery of waste materials that
have been separated at the source include curbside collection, drop off and buy
back centers. The separation and processing of wastes that have been separated at
the source and the separation of commingled wastes usually occur at a materials
recovery facility, transfer stations, combustion facilities and disposal sites.
15

THE FUNCTIONAL ELEMENTS OF SOLID WASTE
Transfer and transport - this element involves two main steps. First, the waste is
transferred from a smaller collection vehicle to larger transport equipment. The
waste is then transported, usually over long distances, to a processing or disposal
site.
Disposal - today, the disposal of wastes by land filling or land spreading is the
ultimate fate of all solid wastes, whether they are residential wastes collected and
transported directly to a landfill site, residual materials from material recovery
facilities, residue from the combustion of solid waste, compost, or other
substances from various solid waste processing facilities.
A modern sanitary landfill is not a dump; it is an engineered facility used for
disposing of solid wastes on land without creating nuisances or hazards to public
health or safety, such as the breeding of insects and the contamination of ground
water.
Energy generation - municipal solid waste can be used to generate energy. Several
technologies have been developed that make the processing for energy generation
cleaner and more economical than ever before, including landfill gas capture,
combustion, pyrolysis, gasification.
16

WASTE MANAGEMENT
The aim of sustainable waste management is to reduce waste
formation and to use resources more efficiently and rationally,
ensuring that the waste of one sector is used as a raw material
in another sector.
It is estimated that the amount of solid waste per capita is around
500 kilograms per year. However, this fi gure may vary greatly
in diff erent cities and seasons.
Disposal of solid waste or waste incineration ash in sanitary
polygons can endanger groundwater or surface water sources.
Therefore, the construction of sanitary polygons has to be
planned very carefully, and their operation has to be strictly
monitored in order to prevent groundwater pollution.
17

WASTE MANAGEMENT 3R CONCEPT
 The waste hierarchy refers to the 3 (or 4) R’s of reduce, reuse,
recycle, (recovery) which classify waste management strategies
according to their desirability.
 The R’s are meant to be a hierarchy, in order of importance.
However in Europe the waste hierarchy has 5 steps: reduce,
reuse, recycle, recovery, and disposal.
 The waste hierarchy has taken many forms over the past decade,
but the basic concept has remained the cornerstone of most waste
minimisation strategies.
The aim of the waste hierarchy is to extract the maximum
practical benefits from products and to generate the
minimum amount of waste.
 Some waste management experts have recently incorporated a
additional R: "Re-think", with the implied meaning that the
present system may have fundamental flaws, and that a
thoroughly effective system of waste management may need an
entirely new way of looking at waste.
 Source reduction involves efforts to reduce hazardous waste and
other materials by modifying industrial production.
 Source reduction methods involve changes in manufacturing
technology, raw material inputs, and product formulation.
 At times, the term "pollution prevention" may refer to source
reduction.
19

REDUCE
Waste minimisation is the process and the policy of reducing the amount of waste
produced by a person or a society.
Waste minimisation involves efforts to minimise resource and energy use during
manufacture. For the same commercial output, usually the fewer materials are used,
the less waste is produced.
Waste minimisation usually requires knowledge of the production process, cradle-
to-grave analysis (the tracking of materials from their extraction to their return to
earth) and detailed knowledge of the composition of the waste.
The main sources of waste vary from country to country. In the UK, most waste
comes from the construction and demolition of buildings, followed by mining
and quarrying, industry and commerce. Household waste constitutes a relatively
small proportion of all waste. Reasons for the creation of waste sometimes
include requirements in the supply chain.
In the waste hierarchy, the most effective approaches to managing waste are at the
top. In contrast to waste minimisation, waste management focuses on processing
waste after it is created, concentrating on re-use, recycling, and waste-to-energy
conversion.
20

REDUCE
In industries, using more efficient manufacturing processes and better materials will
generally reduce the production of waste. The application of waste minimisation
techniques has led to the development of innovative and commercially
successful replacement products. Waste minimisation has proven benefits to
industry and the wider environment.
Waste minimisation often requires investment, which is usually compensated by the
savings. However, waste reduction in one part of the production process may
create waste production in another part.
There are government incentives for waste minimisation, which focus on the
environmental benefits of adopting waste minimisation strategies. In the UK,
several pilot schemes such as The Catalyst Project and the Dee Waste
Minimisation Project, have shown the efficacy of such policies.
Fourteen companies in Merseyside (a metropolitan county in North West England
took part in the Catalyst Project; the project generated overall savings of £9
million and landfill waste was reduced by 12,000 tonnes per year.
21

REDUCE
PROCESSES
RESOURCE OPTIMISATION - Minimising the amount of waste produced by
organisations or individuals goes hand-in-hand with optimising their use of raw
materials. For example, a dressmaker may arrange pattern pieces on a length of fabric in
a particular way to enable the garment to be cut out from the smallest area of fabric.
REUSE OF SCRAPS MATERIAL - Scraps can be immediately re-incorporated at the
beginning of the manufacturing line so that they do not become a waste product. Many
industries routinely do this; for example, paper mills return any damaged rolls to the
beginning of the production line, and in the manufacture of plastic items, off-cuts and
scrap are re-incorporated into new products.
IMPROVED QUALITY CONTROLAND PROCESS MONITORING - Steps can be
taken to ensure that the number of reject batches is kept to a minimum. This is achieved
by increasing the frequency of inspection and the number of points of inspection. For
example, installing automated continuous monitoring equipment can help to identify
production problems at an early stage.
WASTE EXCHANGES - This is where the waste product of one process becomes the raw
material for a second process. Waste exchanges represent another way of reducing waste
disposal volumes for waste that cannot be eliminated.
SHIP TO POINT OF USE - This involves making deliveries of incoming raw materials or
components direct to the point where they are assembled or used in the manufacturing
process to minimise handling and the use of protective wrappings or enclosures.
22

REUSE
To reuse is to use an item more than once. This includes conventional reuse
where the item is used again for the same function, and new-life reuse where
it is used for a different function. In contrast, recycling is the breaking down
of the used item into raw materials which are used to make new items.
By taking useful products and exchanging them, without reprocessing, reuse
help save time, money, energy, and resources. In broader economic terms,
reuse offers quality products to people and organizations with limited means,
while generating jobs and business activity that contribute to the economy.
Historically, financial motivation was one of the main drivers of reuse. In the
developing world this driver can lead to very high levels of reuse, however
rising wages and consequent consumer demand for the convenience of
disposable products has made the reuse of low value items such as packaging
uneconomic in richer countries, leading to the demise of many reuse
programs.
Current environmental awareness is gradually changing attitudes and
regulations, such as the new packaging regulations, are gradually beginning
to reverse the situation.
One example of conventional reuse is the doorstep delivery of milk in refillable
bottles; other examples include the retreading of tires and the use of
returnable/reusable plastic boxes, shipping containers, instead of single-use
corrugated (rievots) fiberboard boxes.
23

Tires, bottles and cans as building materials
REUSE
26
An electric wire reel reused as a center table in
a Rio de Janeiro fair
Reusable glass bottles collected in Bishkek Kyrgyzstan.
Deposit values (0.5-2 Kyrgyz som) are posted next to
the sample bottles on the rack

RECYCLING
Recycling of materials and substances contained in solid waste is very simple in
theory but extremely hard in practice. People have always collected utilisable
and valuable materials (e.g. metals) from waste and used them in industry
because it is cheaper than extracting them from raw materials.
It is also useful to separate cheap materials from waste because they still have
some value (old newspapers to produce pulp and new paper) or it is inconvenient
to throw them away (bottles).
Economic reasons are decisive for the reuse of materials. For the time being, to
produce glass from natural raw materials is cheaper than from discarded, used
glass, and using glass chippings to replace stones in the road or street
construction consumes much more energy.
In many countries regulations require sorting waste at the source. Residents need to
sort waste into such types as food scraps, paper, ash and glass.
There are some ISO standards relating to recycling such as ISO 15270:2008 for plastics waste
and ISO 14001: 2004 for environmental management control of recycling practice as well as
EU directives.
27

RECYCLING
2
28
8
Publicity photo for US aluminium salvage campaign in 1942
Early sorting of recyclable materials: glass and plastic bottles in Poland
Sign at Tamil Nandi, India
Recycling and rubbish bin in
a railway station, Germany

ENVIRONMENTAL EFFECTS OF RECYCLING
Material Energy savings Air pollution savings
Aluminium 95 % 95 %
Cardboard 24 % —
Glass 5 - 30 % 20 %
Paper 40 % 73 %
Plastics 70 % —
Steel 60 % —
27

Solid waste collection and transporting
31
Afront-loading garbage truck in NorthAmerica.

Solid waste collection and transporting, Nepal
32

The weigh bridge is the two part platform over which trucks are driven. The upper works is
auxiliary equipment for leveling the load in the truck and is not part of the scale. This scale
uses electronic measuring equipment.
33

LANDFILLING
35
Landfill operation. The area being filled is a single, well-defined "cell" and a
rubberized landfill liner is in place to prevent contamination by leachates
migrating downward through the underlying geological formation.

Construction of sanitary landfills
35

LANDFILLING
South East New Territories Landfill, Hong Kong
36

SANITARY LANDFILL
USA, New York, Staten Island,
Fresh Kills
37

Landfill compactors
Rammax remote controlled compactor.
4
41
1
A sheepsfoot compactor/roller
operated by U.S. Navy Seabees

MODERN SANITARY LANDFILL IN
GETLINI FOR RIGA CITY
41

ENERGY FROM BIOGAS IN GETLINI
Gads Saražotā
elektroenerģija, MWh
Sadedzinātais metāna
daudzums, m3
Sadedzinātais metāna
daudzums, t
CO2 ekv.
tonnas
2002 5 098 1 283 676 911 19 131
2003 17 887 4 503 946 3 197 67 137
2004 25 748 6 483 346 4 603 96 663
2005 25 425 6 402 015 4 545 95 445
2006 26 331 6 635 412 4 755 99 855
2007 27 361 6 894 972 4 936 103 656
2008 28 742 7 242 984 5 184 108 864
2009 31 130 7 844 760 5 569 116 949
2010 31 099 7 836 984 5 564 116 844
2011 31 295 7 889 928 5 601 117 621
44

AUSTRUMLATG ALES
(iedz.sk. 111 tūkst.)
Sadzīves atkritumu apsaimniekošanas reģionālie projekti un to statuss
(2005.gads)
ZIEMEĻVIDZEMES
VENTSPILS
(iedz.sk. 58 tūkst.) PIEJŪRAS MALIENAS
(iedz.sk. 159 tūkst.) (iedz.sk. 92 tūkst.)
RĪGA
DIENVIDLATGALES
ZEMGALES
VIDUSKUR ZEM ES
LIEPĀJAS
(iedz.sk. 132 tūkst.) VIDUSDAUGAVAS
Ieviesti projekti
Projektiem apstiprināts finansējums
EK iesniegts projekts
Sagatavošanā esošie projekti
46

Incineration plant
Incineration is a waste treatment process that
involves the combustion of organic substances
contained in waste materials.
Incineration and other high temperature waste
treatment systems are described as “thermal
treatment” .
Incineration of waste materials converts the
waste into ash, flue gas, and heat.
The ash is mostly formed by the inorganic
constituents of the waste, and may take the form
of solid lumps or particulates carried by the flue
gas.
The flue gases must be cleaned of gaseous and
particulate pollutants before they are dispersed
into the atmosphere.
In some cases, the heat generated by incineration
can be used to generate generate electric power.
The Spittelau incineration plant in Vienna,
designed by Friedensreich Hundertwasser
50

SYSAV incineration plant in
Malmo, Sweden capable of
handling 25 metric tons per
hour household waste.
To the left of the main stack, a
new identical oven line is
under construction.
49

53
Alarge compost pile that is steaming with the
heat generated by thermophilic microorganisms.
Composting organisms require four
equally important things to work
effectively:
Carbon — for energy; the microbial
oxidation of carbon produces the
heat, if included at suggested levels.
High carbon materials tend to be
brown and dry.
Nitrogen — to grow and reproduce
more organisms to oxidize the
carbon.
High nitrogen materials tend to
be green (or colorful, such as
fruits and vegetables) and wet.[7]
Oxygen — for oxidizing the carbon,
the decomposition process.
Water — in the right amounts to
maintain activity without causing
anaerobic conditions.

Compost
Compost is organic matter that has been decomposed and recycled as a fertilizer and soil
amendment. Compost is a key ingredient in organic farming. At its most essential, the process
of composting requires simply piling up waste outdoors and waiting for the materials to break
down from anywhere between 5-6 weeks or even more.
Modern, methodical composting is a multi-step, closely monitored process with measured
inputs of water, air and carbon- and nitrogen-rich materials. The decomposition process is
aided by shredding the plant matter, adding water and ensuring proper aeration by regularly
turning the mixture. Worms and fungi further break up the material.
Aerobic bacteria manage the chemical process by converting the inputs into heat, carbon
dioxide and ammonium. The ammonium is further converted by bacteria into plant-nourishing
nitrites and nitrates through the process of nitrification.
Compost can be rich in nutrients. It is used in gardens, landscaping, and agriculture. The
compost itself is beneficial for the land in many ways, including as a soil conditioner, a
fertilizer, addition of vital humus or humic acids, and as a natural pesticide for soil.
In ecosystems, compost is useful for erosion control, land and stream reclamation, wetland
construction, and as landfill cover. Organic ingredients intended for composting can
alternatively be used to generate biogas through anaerobic digestion.
Anaerobic digestion is fast overtaking composting in some parts of the world including
central Europe as a primary means of downcycling waste organic matter.
52

Amodern compost bin constructed from plastics
53

Composting plant
56
Composting plant, Edmonton, Canada

16.LECTURE-Solid_waste_management (1).pptx

More Related Content

Similar to 16.LECTURE-Solid_waste_management (1).pptx (20)

Recently uploaded (20)

16.LECTURE-Solid_waste_management (1).pptx