2011 Nissan Rogue Service Repair Manual.pdf

A
B
D
E
F
G
H
I
J
K
L
M
N
P
O
C
QUICK REFERENCE INDEX
A GENERAL INFORMATION GI General Information
B ENGINE EM Engine Mechanical
LU Engine Lubrication System
CO Engine Cooling System
EC Engine Control System
FL Fuel System
EX Exhaust System
STR Starting System
ACC Accelerator Control System
C HYBRID HBC Hybrid Control System
HBB Hybrid Battery System
HBR Hybrid Brake System
D TRANSMISSION & DRIVE-
LINE
CL Clutch
TM Transaxle & Transmission
DLN Driveline
FAX Front Axle
RAX Rear Axle
E SUSPENSION FSU Front Suspension
RSU Rear Suspension
SCS Suspension Control System
WT Road Wheels & Tires
F BRAKES BR Brake System
PB Parking Brake System
BRC Brake Control System
G STEERING ST Steering System
STC Steering Control System
H RESTRAINTS SB Seat Belt
SBC Seat Belt Control System
SR SRS Airbag
SRC SRS Airbag Control System
I VENTILATION, HEATER &
AIR CONDITIONER
VTL Ventilation System
HA Heater & Air Conditioning System
HAC Heater & Air Conditioning Control System
J BODY INTERIOR INT Interior
IP Instrument Panel
SE Seat
ADP Automatic Drive Positioner
K BODY EXTERIOR,
DOORS, ROOF & VEHICLE
SECURITY
DLK Door & Lock
SEC Security Control System
GW Glass & Window System
PWC Power Window Control System
RF Roof
HD Hood
EXT Exterior
BRM Body Repair
L DRIVER CONTROLS MIR Mirrors
EXL Exterior Lighting System
INL Interior Lighting System
WW Wiper & Washer
DEF Defogger
HRN Horn
M ELECTRICAL & POWER
CONTROL
PWO Power Outlet
BCS Body Control System
LAN LAN System
PCS Power Control System
CHG Charging System
PG Power Supply, Ground & Circuit Elements
N DRIVER INFORMATION &
MULTIMEDIA
MWI Meter, Warning Lamp & Indicator
WCS Warning Chime System
SN Sonar System
AV Audio, Visual & Navigation System
O CRUISE CONTROL &
DRIVER ASSISTANCE
CCS Cruise Control System
DAS Driver Assistance System
DMS Drive Mode System
P MAINTENANCE MA Maintenance
All rights reserved. No part
of this Service Manual may
be reproduced or stored in a
retrieval system, or transmit-
ted in any form, or by any
means, electronic, mechani-
cal, recording or otherwise,
without the prior written per-
mission of NISSAN MOTOR
CO., LTD.
Edition: July 2010
Publication No. SM1E-1S35U0

FOREWORD
This manual contains maintenance and repair procedure for the 2011
NISSAN ROGUE.
In order to assure your safety and the efficient functioning of the vehicle,
this manual should be read thoroughly. It is especially important that the
PRECAUTIONS in the GI section be completely understood before starting
any repair task.
All information in this manual is based on the latest product information
at the time of publication. The right is reserved to make changes in specifi-
cations and methods at any time without notice.
IMPORTANT SAFETY NOTICE
The proper performance of service is essential for both the safety of
the technician and the efficient functioning of the vehicle.
The service methods in this Service Manual are described in such a
manner that the service may be performed safely and accurately.
Service varies with the procedures used, the skills of the technician
and the tools and parts available. Accordingly, anyone using service
procedures, tools or parts which are not specifically recommended
by NISSAN must first be completely satisfied that neither personal
safety nor the vehicle’s safety will be jeopardized by the service
method selected.

QUICK REFERENCE CHART ROGUE
QUICK REFERENCE CHART ROGUE PFP:00000
ENGINE TUNE-UP DATA (QR25DE) ELS0003W
FRONT WHEEL ALIGNMENT
Engine model QR25DE
Firing order 1 - 3 - 4 - 2
Idle speed
CVT (In “P” or “N” position)
rpm
700 ± 50
Ignition timing
(BTDC at idle speed)
10° ± 5°
Tensions of drive belts Auto adjustment by auto tensioner
Radiator cap relief pressure kPa (kg/cm2
, psi)
Standard 78.4 - 98.0 (0.8 - 1.0, 11 - 14)
Limit 59 (0.6, 9)
Cooling system leakage testing pressure kPa (kg/cm2
, psi)
157 (1.60, 22.8)
Compression pressure kPa (kg/cm2 , psi)/rpm
Standard 1,412 (14.4, 204.7)/250
Minimum 1,216 (12.4, 176.3)/250
Differential limit between cylinders 100 (1.0, 14.5)/250
Spark plug
(Iridium-tipped type)
Make NGK
Standard type DILKAR6A-11
Gap (Nominal) mm (in) 1.1 (0.043)
Item Standard
Axle type 2WD AWD
Wheel size 16 inch 17 inch 18 inch 16 inch 17 inch 18 inch
Camber
Degree minute (Decimal degree)
Mini-
mum
Left side –1° 00′ (–1.00°)
Right side –1° 15′ (–1.25°)
Nomi-
nal
Left side –0° 15′ (–0.25°)
Right side –0° 30′ (–0.50°)
Maxi-
mum
Left side 0° 30′ (0.50°)
Right side 0° 15′ (0.25°)
Left and right differ-
ence
0° 33′ (0.55°) or less
Caster
Minimum
3° 55′
(3.92°)
4° 00′ (4.00°)
Nominal
4° 40′
(4.67°)
4° 45′ (4.75°)
Maximum
5° 25′
(5.41°)
5° 30′ (5.50°)
Left and right differ-
ence
0° 36′ (0.60°) or less
Kingpin inclination
Minimum 9° 45′ (9.75°)
Nominal 10° 30′ (10.50°)
Maximum 11° 15′ (11.25°)
2011

Measure value under unladen* conditions.
*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
REAR WHEEL ALIGNMENT ELS0003Y
Measure value under unladen* conditions.
*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
BRAKE PEDAL
Unit: mm (in)
FRONT DISK BRAKE
Unit: mm (in)
REAR DISK BRAKE
Unit: mm (in)
Toe-in
Total toe-in
Distance
Minimum In 1 mm (0.04 in)
Nominal In 2 mm (0.08 in)
Maximum In 3 mm (0.12 in)
Toe angle
(left wheel or right wheel)
Degree minute
(Decimal degree)
Minimum In 0° 02′ 30″ (0.05°)
Nominal In 0° 05′ (0.08°)
Maximum In 0° 07′ 30″ (0.12°)
Item Standard
Axle type 2WD AWD
Camber
Minimum –1° 25′ (–1.42°)
Nominal –0° 55′ (–0.92°)
Maximum –0° 25′ (–0.42°)
Toe-in
Total toe-in
Distance
Minimum 0 mm (0 in)
Nominal In 2 mm (0.08 in)
Maximum In 4 mm (0.16 in)
Toe angle (Left wheel or right wheel)
Minimum 0° 00′ (0.00°)
Nominal In 0° 05′ (0.08°)
Maximum In 0° 10′ (0.16°)
Depressed brake pedal height (H1) 183.7 - 193.7 (7.23 - 7.63)
Brake pedal reserve height (H2)
[Depressing 490 N (50 kg, 110 lb) while turning the engine ON]
65 (2.56) or more
Brake pad Wear limit thickness 2.0 (0.079)
Disc rotor Wear limit thickness 24.0 (0.945)
Brake pad Wear limit thickness 1.5 (0.059)
Disc rotor Wear limit thickness 14.0 (0.551)
2011

REFILL CAPACITIES ELS00040
UNIT Liter US measure
Fuel tank
TYPE1 60 15-7/8 gal
TYPE2 65 17-1/8 gal
Engine Coolant ( With reservoir tank ) at MAX level 7.3 7-3/4 qt
Engine oil
Drain and refill
With oil filter change 4.6 4-7/8 qt
Without oil filter change 4.3 4-1/2 qt
Dry engine (Overhaul) 5.4 5-3/4 qt
Transaxle CVT
2WD
Without fluid cooler 7.3 7-3/4 qt
With fluid cooler 7.5 7-7/8 qt
AWD
Without fluid cooler 8.3 8-3/4 qt
With fluid cooler 8.5 9 qt
Transfer 0.36 3/4 pt
Final drive 0.55 1-1/8 pt
Air conditioning system
Compressor oil 0.15 5.07 fl oz
Refrigerant 0.50 kg 1.10 lb
2011

GI-1
GENERAL INFORMATION
C
D
E
F
G
H
I
J
K
L
M
B
GI
SECTION GI
N
O
P
CONTENTS
GENERAL INFORMATION
REGULAR GRADE
HOW TO USE THIS MANUAL ..................
.... 3
HOW TO USE THIS MANUAL .......................
..... 3
Description ..........................................................
......3
Terms ..................................................................
......3
Units ....................................................................
......3
Contents ..............................................................
......3
Relation between Illustrations and Descriptions .
......4
Components ........................................................
......4
HOW TO FOLLOW TROUBLE DIAGNOSES..... 6
Description ..........................................................
......6
How to Follow Test Groups in Trouble Diagnosis......6
Key to Symbols Signifying Measurements or Pro-
cedures ...............................................................
......7
HOW TO READ WIRING DIAGRAMS ...........
..... 9
Connector Symbols .............................................
......9
Sample/Wiring Diagram -Example- .....................
....10
Connector Information .........................................
....12
ABBREVIATIONS ..........................................
....14
Abbreviation List ..................................................
....14
TIGHTENING TORQUE OF STANDARD
BOLTS ............................................................
....19
Description ..........................................................
....19
Tightening Torque Table (New Standard Includ-
ed) .......................................................................
....19
RECOMMENDED CHEMICAL PRODUCTS
AND SEALANTS ............................................
....22
Recommended Chemical Products and Sealants
....22
VEHICLE INFORMATION .........................
...23
IDENTIFICATION INFORMATION .................
....23
Model Variation ...................................................
....23
Information About Identification or Model Code ..
....24
Dimensions .........................................................
....26
Wheels & Tires ....................................................
....26
PRECAUTION ...........................................
...28
PRECAUTIONS .................................................28
Description ...........................................................
....28
FOR USA AND CANADA ......................................
....28
FOR USA AND CANADA : Precaution for Supple-
mental Restraint System (SRS) "AIR BAG" and
"SEAT BELT PRE-TENSIONER" ........................
....28
FOR USA AND CANADA : Precautions For Xenon
Headlamp Service ...............................................
....28
FOR USA AND CANADA : Precaution Necessary
for Steering Wheel Rotation After Battery Discon-
nect ......................................................................
....29
FOR USA AND CANADA : Precaution for Proce-
dure without Cowl Top Cover ..............................
....29
FOR MEXICO .........................................................
....29
FOR MEXICO : Precaution for Supplemental Re-
straint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER" ..............................................
....29
FOR MEXICO : Precautions For Xenon Headlamp
Service .................................................................
....30
FOR MEXICO : Precaution Necessary for Steer-
ing Wheel Rotation After Battery Disconnect ......
....30
FOR MEXICO : Precaution for Procedure without
Cowl Top Cover ...................................................
....31
General Precautions ............................................
....31
Three Way Catalyst .............................................
....32
Multiport Fuel Injection System or Engine Control
System .................................................................
....33
Hoses ..................................................................
....33
Engine Oils ..........................................................
....34
Air Conditioning ...................................................
....34
FUEL ......................................................................
....34
FUEL : Fuel .........................................................
....34
LIFTING POINT .................................................36
Commercial Service Tools ...................................
....36
Revision: 2010 July 2011 Rogue

GI-2
Garage Jack and Safety Stand and 2-Pole Lift ...
... 36
Board-On Lift .......................................................
... 37
TOW TRUCK TOWING ...................................
... 38
Tow Truck Towing ...............................................
... 38
Vehicle Recovery (Freeing a Stuck Vehicle) .......
... 39
BASIC INSPECTION ................................
... 41
SERVICE INFORMATION FOR ELECTRICAL
INCIDENT .......................................................
... 41
Work Flow ............................................................
... 41
Control Units and Electrical Parts ........................
... 41
How to Check Terminal .......................................
... 42
Intermittent Incident .............................................
... 45
Circuit Inspection .................................................
... 48
CONSULT-III/GST CHECKING SYSTEM ......
... 53
Description ...........................................................
... 53
CONSULT-III Function and System Application*1... 53
CONSULT-III/GST Data Link Connector (DLC)
Circuit ..................................................................
... 54
Wiring Diagram - CONSULT-III/GST CHECKING
SYSTEM - ............................................................
... 55
INSPECTION AND ADJUSTMENT ................
... 59
ADDITIONAL SERVICE WHEN REMOVING BAT-
TERY NEGATIVE TERMINAL ...............................
... 59
ADDITIONAL SERVICE WHEN REMOVING
BATTERY NEGATIVE TERMINAL : Required
Procedure After Battery Disconnection ................
... 59
Krom
VEHICLE INFORMATION .......................... 60
IDENTIFICATION INFORMATION .................
... 60
Model Variation ....................................................
... 60
DIMENSIONS AND WEIGHTS .......................
... 61
Dimensions and Weights .....................................
... 61
PRECAUTION ............................................ 62
TOW TRUCK TOWING ..................................
... 62
Tow Truck Towing ................................................
... 62
Vehicle Recovery (Freeing a Stuck Vehicle) ........
... 62

HOW TO USE THIS MANUAL
GI-3
< HOW TO USE THIS MANUAL > [REGULAR GRADE]
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
Description INFOID:0000000006202759
This volume explains “Removal, Disassembly, Installation, Inspection and Adjustment” and “Trouble Diag-
noses”.
Terms INFOID:0000000006202760
• The captions WARNING and CAUTION warn you of steps that must be followed to prevent personal injury
and/or damage to some part of the vehicle.
WARNING indicates the possibility of personal injury if instructions are not followed.
CAUTION indicates the possibility of component damage if instructions are not followed.
BOLD TYPED STATEMENTS except WARNING and CAUTION give you helpful information.
Standard value: Tolerance at inspection and adjustment.
Limit value: The maximum or minimum limit value that should not be exceeded at inspection and adjust-
ment.
Units INFOID:0000000006202761
• The UNITS given in this manual are primarily expressed as the SI UNIT (International System of Unit), and
alternatively expressed in the metric system and in the yard/pound system.
Also with regard to tightening torque of bolts and nuts, there are descriptions both about range and about the
standard tightening torque.
“Example”
Range
Standard
Contents INFOID:0000000006202762
• A QUICK REFERENCE INDEX, a black tab (e.g. ) is provided on the first page. You can quickly find the
first page of each section by matching it to the section's black tab.
• THE CONTENTS are listed on the first page of each section.
• THE TITLE is indicated on the upper portion of each page and shows the part or system.
• THE PAGE NUMBER of each section consists of two or three letters which designate the particular section
and a number (e.g. “BR-5”).
• THE SMALL ILLUSTRATIONS show the important steps such as inspection, use of special tools, knacks of
work and hidden or tricky steps which are not shown in the previous large illustrations.
Assembly, inspection and adjustment procedures for the complicated units such as the automatic transaxle
or transmission, etc. are presented in a step-by-step format where necessary.
Outer Socket Lock Nut : 59 - 78 N·m (6.0 - 8.0 kg-m, 43 - 58 ft-lb)
Drive Shaft Installation Bolt : 44.3 N·m (4.5 kg-m, 33 ft-lb)

GI-4
Relation between Illustrations and Descriptions INFOID:0000000006202763
The following sample explains the relationship between the part description in an illustration, the part name in
the text and the service procedures.
Components INFOID:0000000006202764
• THE LARGE ILLUSTRATIONS are exploded views (see the following) and contain tightening torques, lubri-
cation points, section number of the PARTS CATALOG (e.g. SEC. 440) and other information necessary to
perform repairs.
The illustrations should be used in reference to service matters only. When ordering parts, refer to the appro-
priate PARTS CATALOG.
Components shown in an illustration may be identified by a circled number. When this style of illustration is
used, the text description of the components will follow the illustration.
SAIA0519E

GI-5
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
SYMBOLS
1. Union bolt 2. Copper washer 3. Brake hose
4. Cap 5. Bleed valve 6. Sliding pin bolt
7. Piston seal 8. Piston 9. Piston boot
10. Cylinder body 11. Sliding pin 12. Torque member mounting bolt
13. Washer 14. Sliding pin boot 15. Bushing
16. Torque member 17. Inner shim cover 18. Inner shim
19. Inner pad 20. Pad retainer 21. Pad wear sensor
22. Outer pad 23. Outer shim 24. Outer shim cover
1: PBC (Poly Butyl Cuprysil) grease
or silicone-based grease
2: Rubber grease : Brake fluid
Refer to GI section for additional symbol definitions.
SFIA2959E
SAIA0749E

GI-6
HOW TO FOLLOW TROUBLE DIAGNOSES
NOTICE:
Trouble diagnoses indicate work procedures required to diagnose problems effectively. Observe the following
instructions before diagnosing.
• Before performing trouble diagnoses, read the “Work Flow” in each section.
• After repairs, re-check that the problem has been completely eliminated.
• Refer to Component Parts and Harness Connector Location for the Systems described in each section for
identification/location of components and harness connectors.
• When checking circuit continuity, ignition switch should be OFF.
• Refer to the Circuit Diagram for quick pinpoint check.
If you need to check circuit continuity between harness connectors in more detail, such as when a sub-har-
ness is used, refer to Wiring Diagram in each individual section and Harness Layout in PG section for identi-
fication of harness connectors.
• Before checking voltage at connectors, check battery voltage.
• After accomplishing the Diagnosis Procedures and Electrical Components Inspection, check that all harness
connectors are reconnected as they were.
How to Follow Test Groups in Trouble Diagnosis INFOID:0000000006202766
1. Test group number and test group title
• Test group number and test group title are shown in the upper portion of each test group.
2. Work and diagnosis procedure
• Start to diagnose a problem using procedures indicated in enclosed test groups.
3. Questions and results
• Questions and required results are indicated in test group.
4. Action
• Next action for each test group is indicated based on result of each question.
JPAIA0021GB

GI-7
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
Key to Symbols Signifying Measurements or Procedures INFOID:0000000006202767
JPAIA0397GB

GI-8
JPAIA0398GB

HOW TO READ WIRING DIAGRAMS
GI-9
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
Connector Symbols INFOID:0000000006444142
Most of connector symbols in wiring diagrams are shown from the terminal side.
• Connector symbols shown from the terminal side are enclosed by
a single line and followed by the direction mark.
• Connector symbols shown from the harness side are enclosed by
a double line and followed by the direction mark.
• Certain systems and components, especially those related to
OBD, may use a new style slide-locking type harness connector.
For description and how to disconnect, refer to PG section,
“Description”, “HARNESS CONNECTOR”.
• Male and female terminals
Connector guides for male terminals are shown in black and
female terminals in white in wiring diagrams.
SAIA0257E
SGI363

GI-10
Sample/Wiring Diagram -Example- INFOID:0000000006444143
Each section includes wiring diagrams.
Description
JCAWA0150GB
Number Item Description
1 Power supply • This means the power supply of fusible link or fuse.
2 Fuse • “/” means the fuse.
3
Current rating of fus-
ible link/fuse
• This means the current rating of the fusible link or fuse.
4
Number of fusible link/
fuse
• This means the number of fusible link or fuse location.
5 Fusible link • “X” means the fusible link.
6 Connector number
• Alphabetic characters show to which harness the connector is placed.
• Numeric characters show the identification number of connectors.
7 Switch
• This shows that continuity exists between terminals 1 and 2 when the switch is in the A
position. Continuity exists between terminals 1 and 3 when the switch is in the B position.
8 Circuit (Wiring) • This means the wiring.

GI-11
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
SWITCH POSITIONS
Switches are shown in wiring diagrams as if the vehicle is in the “normal” condition.
A vehicle is in the “normal” condition when:
• ignition switch is “OFF”,
• doors, hood and trunk lid/back door are closed,
• pedals are not depressed, and
• parking brake is released.
MULTIPLE SWITCH
The continuity of multiple switch is described in two ways as shown below.
• The switch chart is used in schematic diagrams.
9 Shielded line • The line enclosed by broken line circle shows shield wire.
10 Connectors • This means that a transmission line bypasses two connectors or more.
11 Option abbreviation • This means the vehicle specifications which layouts the circuit between “ ”.
12 Relay • This shows an internal representation of the relay.
13 Optional splice • The open circle shows that the splice is optional depending on vehicle application.
14 Splice • The shaded circle “ ” means the splice.
15 System branch • This shows that the circuit is branched to other systems.
16 Page crossing • This circuit continues to an adjacent page.
17 Component name • This shows the name of a component.
18 Terminal number • This means the terminal number of a connector.
19 Ground (GND) • This shows the ground connection.
20
Explation of option
description
• This shows a explanation of the option abbreviation used on the same page.
SGI860

GI-12
• The switch diagram is used in wiring diagrams.
Connector Information INFOID:0000000006444144
Description
JSAIA0017GB
1 Connector number
• Alphabetic characters show to which harness the connector is placed.
• Numeric characters show the identification number of connectors.
2 Connector type • This means the connector number. Refer to PG-80, "How To Read Harness Layout".
3 Terminal number • This means the terminal number of a connector.
JCAWA0152GB

GI-13
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
4 Wire color
• This shows a code for the color of the wire.
B = Black
W = White
R = Red
G = Green
L = Blue
Y = Yellow
LG = Light Green
BG = Beige
BR = Brown
OR or O = Orange
P = Pink
PU or V (Violet) = Purple
GY or GR = Gray
SB = Sky Blue
CH = Dark Brown
DG = Dark Green
• When the wire color is striped, the base color is given first, followed by the stripe color as
shown below:
Example: L/W = Blue with White Stripe
5 Connector
• This means the connector information.
• This unit-side is described by the connector symbols.

GI-14
ABBREVIATIONS
ABBREVIATIONS
Abbreviation List INFOID:0000000006442982
The following ABBREVIATIONS are used:
A
B
C
D
ABBREVIATION DESCRIPTION
A/C Air conditioner
A/C Air conditioning
A/F sensor Air fuel ratio sensor
A/T Automatic transaxle/transmission
ABS Anti-lock braking system
ACCS Advance climate control system
ACL Air cleaner
AP Accelerator pedal
APP Accelerator pedal position
ATF Automatic transmission fluid
AV Audio visual
AWD All wheel drive
BARO Barometric pressure
BCM Body control module
BLSD Brake limited slip differential
BPP Brake pedal position
BSI Blind spot intervention
BSW Blind spot warning
CKP Crankshaft position
CL Closed loop
CMP Camshaft position
CPP Clutch pedal position
CTP Closed throttle position
CVT Continuously Variable transaxle/transmission
D1 Drive range first gear
D2 Drive range second gear
D3 Drive range third gear
D4 Drive range fourth gear
DCA Distance control assist
DDS Downhill drive support
DFI Direct fuel injection system
DLC Data link connector
DTC Diagnostic trouble code

ABBREVIATIONS
GI-15
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
E
F
G
H
E/T Exhaust temperature
EBD Electric brake force distribution
EC Engine control
ECL Engine coolant level
ECM Engine control module
ECT Engine coolant temperature
ECV Electrical control valve
EEPROM Electrically erasable programmable read only memory
EFT Engine fuel temperature
EGR Exhaust gas recirculation
EGRT Exhaust gas recirculation temperature
EGT Exhaust gas temperature
EOP Engine oil pressure
EP Exhaust pressure
EPR Exhaust pressure regulator
EPS Electronically controlled power steering
ESP Electronic stability program system
EVAP canister Evaporative emission canister
EXC Exhaust control
FC Fan control
FCW Forward collision warning
FIC Fuel injector control
FP Fuel pump
FR Front
FRP Fuel rail pressure
FRT Fuel rail temperature
FTP Fuel tank pressure
FTT Fuel tank temperature
GND Ground
GPS Global positioning system
GST Generic scan tool
HBMC Hydraulic body-motion control system
HDD Hard disk drive
HO2S Heated oxygen sensor
HOC Heated oxidation catalyst

GI-16
ABBREVIATIONS
I
K
L
M
N
O
I/M Inspection and maintenance
IA Intake air
IAC Idle air control
IAT Intake air temperature
IBA Intelligent brake assist
IC Ignition control
ICC Intelligent cruise control
ICM Ignition control module
IPDM E/R Intelligent power distribution module engine room
ISC Idle speed control
ISS Input shaft speed
KS Knock sensor
LCD Liquid crystal display
LCU Local control unit
LDP Lane departure prevention
LDW Lane departure warning
LED Light emitting diode
LH Left-hand
LIN Local interconnect network
M/T Manual transaxle/transmission
MAF Mass airflow
MAP Manifold absolute pressure
MI Malfunction indicator
MIL Malfunction indicator lamp
NOX Nitrogen oxides
O2 Oxygen
O2S Oxygen sensor
OBD On board diagnostic
OC Oxidation catalytic converter
OD Overdrive
OL Open loop
OSS Output shaft speed

ABBREVIATIONS
GI-17
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
P
R
S
T
U
V
W
P/S Power steering
PBR Potentio balance resistor
PCV Positive crankcase ventilation
PNP Park/Neutral position
PSP Power steering pressure
PTC Positive temperature coefficient
PTO Power takeoff
PWM Pulse width modulation
RAM Random access memory
RAS Rear active steer
RH Right-hand
ROM Read only memory
RPM Engine speed
RR Rear
SAE Society of Automotive Engineers, Inc.
SCK Serial clock
SDS Service Data and Specifications
SRT System readiness test
SST Special Service Tools
TC Turbocharger
TCM Transmission control module
TCS Traction control system
TP Throttle position
TPMS Tire pressure monitoring system
TSS Turbine shaft speed
TWC Three way catalytic converter
USS Uphill start support
VDC Vehicle dynamics control system
VIN Vehicle identification number
VSS Vehicle speed sensor
WOT Wide open throttle

GI-18
ABBREVIATIONS
1
2
3
4
5
6
7
11 1st range first gear
12 1st range second gear
1GR First gear
21 2nd range first gear
22 2nd range second gear
2GR Second gear
2WD 2-Wheel Drive
3GR Third gear
4GR Fourth gear
4WAS Four wheel active steer
4WD Four wheel drive
5GR Fifth gear
6GR Sixth gear
7GR Seventh gear

TIGHTENING TORQUE OF STANDARD BOLTS
GI-19
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
This vehicle has both new standard based on ISO* and previous standard bolts/nuts. There are some differ-
ences between these two types of bolts/ nuts; shape of the head, grade of strength, hexagonal width across
flats and the standard tightening torque.
• For guidance in discriminating, refer to GI-19, "Tightening Torque Table (New Standard Included)".
• The new standard machine screws and tapping screws have a head of ISO standard torx recess.
• If the tightening torque is not described in the description or figure, refer to GI-19, "Tightening Torque Table
(New Standard Included)".
*ISO: International Organization for Standardization
Tightening Torque Table (New Standard Included) INFOID:0000000006202773
CAUTION:
• The special parts are excluded.
• The bolts/nuts in these tables have a strength (discrimination) number/symbol assigned to the head
or the like. As to the relation between the strength grade in these tables and the strength (discrimi-
nation) number/symbol, refer to “DISCRIMINATION OF BOLTS AND NUTS”.
PREVIOUS STANDARD
CAUTION:
Grade
(Strength
grade)
Bolt
size
Bolt di-
ameter
mm
Hexagonal
width
across flats
mm
Pitch
mm
Tightening torque (Without lubricant)
Hexagon head bolt Hexagon flange bolt
N·m kg-m ft-lb in-lb N·m kg-m ft-lb in-lb
4T
M6 6.0 10 1.0 5.5 0.56 4 49 7 0.71 5 62
M8 8.0 12
1.25 13.5 1.4 10 — 17 1.7 13 —
1.0 13.5 1.4 10 — 17 1.7 13 —
M10 10.0 14
1.5 28 2.9 21 — 35 3.6 26 —
1.25 28 2.9 21 — 35 3.6 26 —
M12 12.0 17
1.75 45 4.6 33 — 55 5.6 41 —
1.25 45 4.6 33 — 65 6.6 48 —
M14 14.0 19 1.5 80 8.2 59 — 100 10 74 —
7T
M6 6.0 10 1.0 9 0.92 7 80 11 1.1 8 97
M8 8.0 12
1.25 22 2.2 16 — 28 2.9 21 —
1.0 22 2.2 16 — 28 2.9 21 —
M10 10.0 14
1.5 45 4.6 33 — 55 5.6 41 —
1.25 45 4.6 33 — 55 5.6 41 —
M12 12.0 17
1.75 80 8.2 59 — 100 10 74 —
1.25 80 8.2 59 — 100 10 74 —
M14 14.0 19 1.5 130 13 96 — 170 17 125 —
9T
M6 6.0 10 1.0 11 1.1 8 — 13.5 1.4 10 —
M8 8.0 12
1.25 28 2.9 21 — 35 3.6 26 —
1.0 28 2.9 21 — 35 3.6 26 —
M10 10.0 14
1.5 55 5.6 41 — 80 8.2 59 —
1.25 55 5.6 41 — 80 8.2 59 —
M12 12.0 17
1.75 100 10 74 — 130 13 96 —
1.25 100 10 74 — 130 13 96 —
M14 14.0 19 1.5 170 17 125 — 210 21 155 —

GI-20
The parts with aluminum or the cast iron washer surface/thread surface are excluded.
NEW STANDARD BASED ON ISO
CAUTION:
1. Use tightening torque with lubricant for the new standard bolts/nuts in principle. Friction coeffi-
cient stabilizer is applied to the new standard bolts/nuts.
2. However, use tightening torque without lubricant for the following cases. Friction coefficient stabi-
lizer is not applied to the following bolts/nuts.
- Grade 4.8, M6 size bolt, Conical spring washer installed
- Paint removing nut (Size M6 and M8) for fixing with weld bolt
Grade
(Strength
grade)
Bolt
size
Bolt di-
ameter
mm
Hexagonal
width
across flats
mm
Pitch
mm
Tightening torque
Hexagon head bolt Hexagon flange bolt
N·m kg-m ft-lb in-lb N·m kg-m ft-lb in-lb
4.8
(Without
lubricant)
M6 6.0 10 1.0 5.5 0.56 4 49 7 0.71 5 62
M8 8.0 13
1.25 13.5 1.4 10 — 17 1.7 13 —
1.0 13.5 1.4 10 — 17 1.7 13 —
M10 10.0 16
1.5 28 2.9 21 — 35 3.6 26 —
1.25 28 2.9 21 — 35 3.6 26 —
M12 12.0 18
1.75 45 4.6 33 — 55 5.6 41 —
1.25 45 4.6 33 — 65 6.6 48 —
M14 14.0 21 1.5 80 8.2 59 — 100 10 74 —
4.8
(With lu-
bricant)
M6 6.0 10 1.0 4 0.41 3 35 5.5 0.56 4 49
M8 8.0 13
1.25 11 1.1 8 — 13.5 1.4 10 —
1.0 11 1.1 8 — 13.5 1.4 10 —
M10 10.0 16
1.5 22 2.2 16 — 28 2.9 21 —
1.25 22 2.2 16 — 28 2.9 21 —
M12 12.0 18
1.75 35 3.6 26 — 45 4.6 33 —
1.25 35 3.6 26 — 45 4.6 33 —
M14 14.0 21 1.5 65 6.6 48 — 80 8.2 59 —
8.8
(With lu-
bricant)
M6 6.0 10 1.0 8 0.82 6 71 10 1.0 7 89
M8 8.0 13
1.25 21 2.1 15 — 25 2.6 18 —
1.0 21 2.1 15 — 25 2.6 18 —
M10 10.0 16
1.5 40 4.1 30 — 50 5.1 37 —
1.25 40 4.1 30 — 50 5.1 37 —
M12 12.0 18
1.75 70 7.1 52 — 85 8.7 63 —
1.25 70 7.1 52 — 85 8.7 63 —
M14 14.0 21 1.5 120 12 89 — 140 14 103 —
10.9
(With lu-
bricant)
M6 6.0 10 1.0 10 1.0 7 89 12 1.2 9 106
M8 8.0 13
1.25 27 2.8 20 — 32 3.3 24 —
1.0 27 2.8 20 — 32 3.3 24 —
M10 10.0 16
1.5 55 5.6 41 — 65 6.6 48 —
1.25 55 5.6 41 — 65 6.6 48 —
M12 12.0 18
1.75 95 9.7 70 — 110 11 81 —
1.25 95 9.7 70 — 110 11 81 —
M14 14.0 21 1.5 160 16 118 — 180 18 133 —

GI-21
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
DISCRIMINATION OF BOLTS AND NUTS
SAIA0453E

GI-22
RECOMMENDED CHEMICAL PRODUCTS AND SEALANTS
RECOMMENDED CHEMICAL PRODUCTS AND SEALANTS
Recommended Chemical Products and Sealants INFOID:0000000006202774
Refer to the following chart for help in selecting the appropriate chemical product or sealant.
Product Description Purpose
Nissan North America
Part No. (USA)
Nissan Canada Part
No. (Canada)
Aftermarket Cross-
reference Part Nos.
1
Rear View Mirror Adhe-
sive
Used to permanently re-
mount rear view mirrors to
windows.
999MP-AM000P 99998-50505 Permatex 81844
2
Anaerobic Liquid Gas-
ket
For metal-to-metal flange
sealing.
Can fill a 0.38 mm (0.015
inch) gap and provide in-
stant sealing for most pow-
ertrain applications.
999MP-AM001P 99998-50503
Permatex 51813 and
51817
3
High Performance
Thread Sealant
Provides instant sealing on
any threaded straight or
parallel threaded fitting.
(Thread sealant only, no
locking ability.)
• Do not use on plastic.
999MP-AM002P 999MP-AM002P Permatex 56521
4 Silicone RTV
Gasket Maker
999MP-AM003P
(Ultra Grey)
99998-50506
(Ultra Grey)
Permatex Ultra Grey
82194;
Three Bond
1207,1215, 1216,
1217F, 1217G and
1217H
Nissan RTV Part No.
999MP-A7007
Gasket Maker for Maxima/
Quest 5-speed automatic
transmission
(RE5F22A)
– –
Three Bond 1281B
or exact equivalent in
its quality
5
High Temperature,
High Strength Thread
Locking Sealant (Red)
Threadlocker 999MP-AM004P 999MP-AM004P
Permatex 27200;
Three Bond 1360,
1360N, 1305 N&P,
1307N, 1335,
1335B, 1363B,
1377C, 1386B, D&E
and 1388
Loctite 648
6
Medium Strength
Thread Locking Seal-
ant (Blue)
Threadlocker (service tool
removable)
999MP-AM005P 999MP-AM005P
Permatex 24200,
24206, 24240,
24283 and 09178;
Three Bond 1322,
1322N, 1324 D&N,
1333D, 1361C,
1364D, 1370C and
1374

IDENTIFICATION INFORMATION
GI-23
< VEHICLE INFORMATION > [REGULAR GRADE]
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
VEHICLE INFORMATION
Model Variation INFOID:0000000006202775
Destination Body Engine Axle
Transmis-
sion
Grade Model
USA (Except for
California)
Hatch
Back
QR25DE
2WD
CVT
25S FDBALCZ-EUA
25SV FDBALDZ-EUA
25SL Package FDBALEZ-EUA
25SV Premium FDBALHZ-EUA
AWD (4WD)
25S FDBNLCZ-EUA
25SV FDBNLDZ-EUA
25SL Package FDBNLEZ-EUA
25SV Premium FDBNLHZ-EUA
California
2WD
25S FDBALCZ-EVA
25SV FDBALDZ-EVA
25SL Package FDBALEZ-EVA
25SV Premium FDBALHZ-EVA
AWD (4WD)
25S FDBNLCZ-EVA
25SV FDBNLDZ-EVA
25SL Package FDBNLEZ-EVA
25SV Premium FDBNLHZ-EVA
Canada
2WD
25S FDBALCZ-ENA
25SV FDBALDZ-ENA
25SV Premium FDBALHZ-ENA
AWD (4WD)
25S FDBNLCZ-ENA
25SV FDBNLDZ-ENA
25SV Premium FDBNLHZ-ENA
25SL FDBNLJZ-ENA
Mexico
2WD
25S FDBALCZ-EJA
M-CVT
SL FDBALJW-EJA
SL Leather FDBALGW-EJA
AWD (4WD) SL FDBNLJW-EJA

GI-24
Model variation code (Prefix and suffix designations)
Information About Identification or Model Code INFOID:0000000006202776
IDENTIFICATION NUMBER
JPAIA0834GB
JPAIA0192ZZ
1. Vehicle identification plate for Mexico 2. Emission control information label
except for Mexico
3. Vehicle identification number (Chassis
number)
4. Vehicle identification number plate 5. Air conditioner specification label 6. Tire and loading information label except for
Mexico
Tire placard for Mexico
7. FMVSS certification label except for
Mexico

GI-25
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
VEHICLE IDENTIFICATION NUMBER ARRANGEMENT
IDENTIFICATION PLATE
For Mexico
ENGINE SERIAL NUMBER
AUTOMATIC TRANSMISSION NUMBER
JPAIA0835GB
JPAIA0193ZZ
1. Type 2. Vehicle identification number (Chassis number) 3. Model variation code
4. Body color code 5. Trim color code 6. Engine model
7. Engine displacement 8. Transmission model 9. Axle model
: Vehicle front
JPAIA0412ZZ

GI-26
Dimensions INFOID:0000000006202777
Unit: mm (in)
*1: Without front license plate bracket
*2: With front license plate bracket
*3: For USA and Canada
*4: For Mexico
*5: With roof rail
Wheels & Tires INFOID:0000000006202779
FOR USA AND CANADA
: Vehicle front
SAIA1496E
Overall length
4,655 (183.3)*1
4,670 (183.9)*2
Overall width 1,800 (70.9)
Overall height
1,658 (65.3)*3
1,683 (66.3)*3, *5
1,650 (65.0)*4
1,680 (66.1)*4, *5
Front tread 1,540 (60.6)
Rear tread 1,550 (61.0)
Wheelbase 2,690 (105.9)
Conventional
Tire
16 inch P215/70R16 99H
17 inch P225/60R17 98H
18 inch P225/55R18 97V
Road wheel
16 inch
(Steel)
Size 16 × 6-1/2JJ
Offset 40 mm (1.57 in)
17 inch
(Aluminum)
Size 17 × 7J
18 inch
(Aluminum)
Size 18 × 7J

GI-27
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
FOR MEXICO
Spare
Tire
16 inch T155/90D16 110M
17 inch P225/60R17 98H
18 inch P225/55R18 97V
Road wheel
16 inch
(Steel)
Size 16 × 4T
17 inch
(Aluminum)
Size 17 × 7J
18 inch
(Aluminum)
Size 18 × 7J
Conventional
Tire
16 inch P215/70R16 99H
17 inch P225/60R17 98H
18 inch P225/55R18 97V
Road wheel
16 inch
(Steel)
Size 16 × 6-1/2J
17 inch
(Aluminum)
Size 17 × 7J
18 inch
(Aluminum)
Size 18 × 7J
Spare
Tire
16 inch P215/70R16 99H
17 inch P225/60R17 98H
18 inch P225/55R18 97V
Road wheel
16 inch
(Steel)
Size 16 × 6-1/2JJ
17 inch
(Aluminum)
Size 17 × 7J
18 inch
(Aluminum)
Size 18 × 7J

GI-28
< PRECAUTION > [REGULAR GRADE]
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Observe the following precautions to ensure safe and proper servicing. These precautions are not
described in each individual section.
FOR USA AND CANADA
FOR USA AND CANADA : Precaution for Supplemental Restraint System (SRS) "AIR
BAG" and "SEAT BELT PRE-TENSIONER" INFOID:0000000006441853
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the “SRS AIR BAG” and “SEAT BELT” of this
Service Manual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision that would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see “SRS AIR BAG”.
• Never use electrical test equipment on any circuit related to the SRS unless instructed to in this Ser-
vice Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness
connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the
ignition ON or engine running, never use air or electric power tools or strike near the sensor(s) with
a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
FOR USA AND CANADA : Precautions For Xenon Headlamp Service INFOID:0000000006441855
WARNING:
Comply with the following warnings to prevent any serious accident.
• Disconnect the battery cable (negative terminal) or the power supply fuse before installing, remov-
ing, or touching the xenon headlamp (bulb included). The xenon headlamp contains high-voltage
generated parts.
• Never work with wet hands.
• Check the xenon headlamp ON-OFF status after assembling it to the vehicle. Never turn the xenon
headlamp ON in other conditions. Connect the power supply to the vehicle-side connector.
(Turning it ON outside the lamp case may cause fire or visual impairments.)
• Never touch the bulb glass immediately after turning it OFF. It is extremely hot.
CAUTION:
Comply with the following cautions to prevent any error and malfunction.
• Install the xenon bulb securely. (Insufficient bulb socket installation may melt the bulb, the connec-
tor, the housing, etc. by high-voltage leakage or corona discharge.)
• Never perform HID circuit inspection with a tester.
• Never touch the xenon bulb glass with hands. Never put oil and grease on it.
• Dispose of the used xenon bulb after packing it in thick vinyl without breaking it.
• Never wipe out dirt and contamination with organic solvent (thinner, gasoline, etc.).

PRECAUTIONS
GI-29
< PRECAUTION > [REGULAR GRADE]
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
FOR USA AND CANADA : Precaution Necessary for Steering Wheel Rotation After
Battery Disconnect INFOID:0000000006441857
NOTE:
• This Procedure is applied only to models with Intelligent Key system and NATS (NISSAN ANTI-THEFT SYS-
TEM).
• Remove and install all control units after disconnecting both battery cables with the ignition switch in the
″LOCK″ position.
• Always use CONSULT-III to perform self-diagnosis as a part of each function inspection after finishing work.
If DTC is detected, perform trouble diagnosis according to self-diagnostic results.
For models equipped with the Intelligent Key system and NATS, an electrically controlled steering lock mech-
anism is adopted on the key cylinder.
For this reason, if the battery is disconnected or if the battery is discharged, the steering wheel will lock and
steering wheel rotation will become impossible.
If steering wheel rotation is required when battery power is interrupted, follow the procedure below before
starting the repair operation.
OPERATION PROCEDURE
1. Connect both battery cables.
NOTE:
Supply power using jumper cables if battery is discharged.
2. Use the Intelligent Key or mechanical key to turn the ignition switch to the ″ACC″ position. At this time, the
steering lock will be released.
3. Disconnect both battery cables. The steering lock will remain released and the steering wheel can be
rotated.
4. Perform the necessary repair operation.
5. When the repair work is completed, return the ignition switch to the ″LOCK″ position before connecting
the battery cables. (At this time, the steering lock mechanism will engage.)
6. Perform a self-diagnosis check of all control units using CONSULT-III.
FOR USA AND CANADA : Precaution for Procedure without Cowl Top Cover
INFOID:0000000006415458
When performing the procedure after removing cowl top cover, cover
the lower end of windshield with urethane, etc.
FOR MEXICO
FOR MEXICO : Precaution for Supplemental Restraint System (SRS) "AIR BAG" and
"SEAT BELT PRE-TENSIONER" INFOID:0000000006441854
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the “SRS AIR BAG” and
“SEAT BELT” of this Service Manual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
PIIB3706J

Thank you very much
for your reading.
Please Click Here
Then Get More
Information.

2011 Nissan Rogue Service Repair Manual.pdf

More Related Content

Similar to 2011 Nissan Rogue Service Repair Manual.pdf(20)

More from f8usejkddmmde3(20)

Recently uploaded(20)

2011 Nissan Rogue Service Repair Manual.pdf