1. Student: Sevinay Mercan
Supervisor: Prof. Kim Vanmeensel
Co-Supervisor: Prof. Reza Talemi
Daily Supervisor: Ali Rauf
May 22, 2025
Effect of Heat Treatments on Elastic Property Anisotropy in
3D Printed High-Temperature Nickel Superalloys
8. Britton, T., Jiang, J., Guo, Y., Vilalta-Clemente, A., Wallis, D., Hansen, L., Winkelmann, A., & Wilkinson, A. (2016).
Tutorial: Crystal orientations and EBSD — Or which way is up? Materials Characterization, 117, 113–126.
https://doi.org/10.1016/j.matchar.2016.04.008
Everaerts, J., Papadaki, C., Li, W., & Korsunsky, A. M. (2019). Evaluation of single crystal elastic stiffness coefficients of a
nickel-based superalloy by electron backscatter diffraction and nanoindentation. Journal of the Mechanics and Physics of
Solids, 131, 303–312. https://doi.org/10.1016/j.jmps.2019.07.011
Seehaus, M., Lee, S., Stollenwerk, T., Wheeler, J. M., & Korte-Kerzel, S. (2023). Estimation of directional single crystal
elastic properties from nano-indentation by correlation with EBSD and first-principle calculations. Materials & Design, 234,
112296. https://doi.org/10.1016/j.matdes.2023.112296
W. C. Oliver and G. M. Pharr, “Measurement of hardness and elastic modulus by instrumented indentation: Advances in
understanding and refinements to methodology,” 2004. [Online]. Available: www.mrs.org/publications/jmr/policy.html
Faculty of Engineering Sciences, Department of Materials Engineering
8
REFERENCES
9. Thank you for your attention !
Departmant Materials Engineering
9
![Britton, T., Jiang, J., Guo, Y., Vilalta-Clemente, A., Wallis, D., Hansen, L., Winkelmann, A., & Wilkinson, A. (2016).
Tutorial: Crystal orientations and EBSD — Or which way is up? Materials Characterization, 117, 113–126.
https://doi.org/10.1016/j.matchar.2016.04.008
Everaerts, J., Papadaki, C., Li, W., & Korsunsky, A. M. (2019). Evaluation of single crystal elastic stiffness coefficients of a
nickel-based superalloy by electron backscatter diffraction and nanoindentation. Journal of the Mechanics and Physics of
Solids, 131, 303–312. https://doi.org/10.1016/j.jmps.2019.07.011
Seehaus, M., Lee, S., Stollenwerk, T., Wheeler, J. M., & Korte-Kerzel, S. (2023). Estimation of directional single crystal
elastic properties from nano-indentation by correlation with EBSD and first-principle calculations. Materials & Design, 234,
112296. https://doi.org/10.1016/j.matdes.2023.112296
W. C. Oliver and G. M. Pharr, “Measurement of hardness and elastic modulus by instrumented indentation: Advances in
understanding and refinements to methodology,” 2004. [Online]. Available: www.mrs.org/publications/jmr/policy.html
Faculty of Engineering Sciences, Department of Materials Engineering
8
REFERENCES](https://image.slidesharecdn.com/22thofmaymeeting-250729160042-bb41fe6a/85/22thofMay_Meetingbbbbbbbbbbbbbbbbbbbbbb-pptx-8-320.jpg)
