Academic Problem-Solving And Students Identities As Engineers

The Qualitative Report
The Qualitative Report
Volume 22 Number 2 Article 7
2-12-2017
Academic Problem-Solving and Students’ identities as engineers
Mirka Koro-Ljungberg
Arizona State University at the Tempe Campus, mirka.koro-ljungberg@asu.edu
Elliot P. Douglas
Nathan J. McNeill
David J. Therriault
Christine S. Lee
See next page for additional authors
Follow this and additional works at: https://nsuworks.nova.edu/tqr
Part of the Educational Methods Commons, Engineering Education Commons, and the Quantitative,
Qualitative, Comparative, and Historical Methodologies Commons
Recommended APA Citation
Recommended APA Citation
Koro-Ljungberg, M., Douglas, E. P., McNeill, N. J., Therriault, D. J., Lee, C. S., & Malcolm, Z. (2017).
Academic Problem-Solving and Students’ identities as engineers. The Qualitative Report, 22(2), 456-478.
https://doi.org/10.46743/2160-3715/2017.2567
This Article is brought to you for free and open access by the The Qualitative Report at NSUWorks. It has been
accepted for inclusion in The Qualitative Report by an authorized administrator of NSUWorks. For more
information, please contact nsuworks@nova.edu.

Abstract
Abstract
Socially constructed identities and language practices influence the ways students perceive themselves
as learners, problem solvers, and future professionals. While research has been conducted on individuals’
identity as engineers, less has been written about how the language used during engineering problem
solving influences students’ perceptions and their construction of identities as learners and future
engineers. This study investigated engineering students’ identities as reflected in their use of language
and discourses while engaged in an engineering problem solving activity. We conducted interviews with
eight engineering students at a large southeastern university about their approaches to open and closed-
ended materials engineering problems. A modification of Gee’s analysis of language-in-use was used to
analyze the interviews. We found that pedagogical and engineering problem solving uses of language
were the most common. Participants were more likely to perceive themselves as students highlighting
the practices, expectations, and language associated with being a student rather than as emerging
engineers whose practices are affected by conditions of professional practice. We suggest that problem
solving in an academic setting may not encourage students to consider alternative discourses related to
industry, professionalism, or creativity; and, consequently, fail to promote connections to social worlds
beyond the classroom. By learning about the ways in which language in particular settings produces
identities and shapes problem solving practices, educators and engineering professionals can gain
deeper understanding of how language shapes the ways students describe themselves as problem-
solvers and make decisions about procedures and techniques to solve engineering problems.
Keywords
Keywords
Engineering Students, Identity, Language-In-Use
Creative Commons License
Creative Commons License
This work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 4.0 License.
Acknowledgements
Acknowledgements
This material is based upon work supported by the National Science Foundation under Grant No.
DRL-0909976.
Authors
Authors
Mirka Koro-Ljungberg, Elliot P. Douglas, Nathan J. McNeill, David J. Therriault, Christine S. Lee, and Zaria
Malcolm
This article is available in The Qualitative Report: https://nsuworks.nova.edu/tqr/vol22/iss2/7

The Qualitative Report 2017 Volume 22, Number 2, Article 5, 456-478
Academic Problem-Solving and Students’ Identities as Engineers
Mirka Koro-Ljungberg, Elliot P. Douglas, Nathan J. McNeill,
David J. Therriault, Christine S. Lee, and Zaria Malcolm
Arizona State University, Tempe, Arizona, USA
Socially constructed identities and language practices influence the ways
students perceive themselves as learners, problem solvers, and future
professionals. While research has been conducted on individuals’ identity as
engineers, less has been written about how the language used during
engineering problem solving influences students’ perceptions and their
construction of identities as learners and future engineers. This study
investigated engineering students’ identities as reflected in their use of
language and discourses while engaged in an engineering problem solving
activity. We conducted interviews with eight engineering students at a large
southeastern university about their approaches to open and closed-ended
materials engineering problems. A modification of Gee’s analysis of
language-in-use was used to analyze the interviews. We found that
pedagogical and engineering problem solving uses of language were the most
common. Participants were more likely to perceive themselves as students
highlighting the practices, expectations, and language associated with being a
student rather than as emerging engineers whose practices are affected by
conditions of professional practice. We suggest that problem solving in an
academic setting may not encourage students to consider alternative
discourses related to industry, professionalism, or creativity; and,
consequently, fail to promote connections to social worlds beyond the
classroom. By learning about the ways in which language in particular
settings produces identities and shapes problem solving practices, educators
and engineering professionals can gain deeper understanding of how
language shapes the ways students describe themselves as problem-solvers
and make decisions about procedures and techniques to solve engineering
problems. Keywords: Engineering Students, Identity, Language-In-Use
Engineering practice has been described as focused on problem-solving (Donald,
2002; Sheppard, Macatangay, Colby, & Sullivan, 2008) with most workplace problems being
ill-structured (Jonassen, Strobel, & Lee, 2006; Yadav, Shaver, & Meckl, 2010; Yadav,
Subedi, Lundeberg, & Bunting, 2011). Further, engineering identities are tied to engineering
learning; as students become adept at solving complex problems they begin to transition from
an identity as student to an identity as engineer (Tonso, 2014). However, much of the
engineering curriculum does not provide opportunities for this identity development. While
there are some efforts to introduce design problems in engineering curricula (Dym, Agogino,
Eris, Frey, & Leifer, 2005; Marra, Palmer, & Litzinger, 2000) for the most part problems
presented to students in academic settings are well-structured (Shin et al., 2003) and thus
“engineering graduates are ill-prepared to solve complex, workplace problems (Jonassen,
2014, p. 103).” Although one goal of an engineering education is to establish students’
identities as engineers, if the problems they generally solve remain in the academic space
they may not develop these identities. Thus, we find it important to investigate how students
construct identities through typical academic problems, and this paper is framed around these
typical problems.

Mirka Koro-Ljungberg et al. 457
Identities, language in use, and various linguistic practices shape each other and
influence the ways in which students experience and perceive themselves as learners and
future professionals. By analyzing “language-in-use” (see Gee, 2011a, 2001b) educators and
engineering professionals can gain a deeper understanding of how students make decisions
about procedures and techniques associated with problem solving. In addition, language
influences the identities taken on by individuals.
Various theoretical frameworks describe the relationship between language and
identity. One classic example is that of Berger and Luckmann (1966) who describe how
language (in their words, “conversation”) both reinforces the taken-for-granted reality and at
the same time changes that reality through what is said or left unsaid. Gee (2011a) echoes this
when he says “any use of language gains its meaning from the “game” or practice of which it
is a part and which it is enacting (p. 9),” and, “language has meaning only in and through
social practices, practices which often leave us morally complicit with harm and injustice
unless we attempt to transform them” (p. 12). He then extends this concept with seven
“building tasks” that describe the ways in which language is used to create reality. He further
explains that “an oral or written ‘utterance’ has meaning only if and when it communicates a
who [socially situated identity] and a what [socially situated activity] (p. 30, italics in
original).” Thus, examining how language is used in specific activities can shed light on how
both those activities and the identities associated with them are created. In this work, we
examine the language used by engineering students as they talk about a problem-solving task
in order to understand how they construct their identities.
More specifically, the purpose of this paper is to describe the voiced identities of
engineering students engaged in a problem solving exercise; thus yielding important insights
into the ways in which students construct their identities as students, problem solvers, future
engineers, and so on. As will be described in the literature review below, students’ identities
can have an important influence on their learning trajectories and ultimately on their
identities as engineering professionals. Thus, this study is guided by the following research
question: How do engineering students describe their identities when solving typical
academic engineering problems?
Literature Review
While there has been much research conducted on individuals’ identity as engineers
(see our following literature review), less has been written about identity with respect to the
act of engineering (i.e., problem solving) and engineers as individual problem solvers. One
exception of particular relevance to our study is work by Downey (2008). He describes a
course, Engineering Cultures, that asks students to reconsider the normative concept of
engineering problem solving as being “a well-honed method of analysis (p. 436)” with no
room for emotional aspects. The course challenges students to understand their own historical
and social development as engineers. There is also a concern in the literature about students’
abilities to adopt identities that align with professional engineering practice (Dannels, 2000;
Dunsmore, Turns, & Yellin, 2011; Hult, Dahlgren, Dahlgren, & af Segerstad, 2003) .
Because problem solving is seen as one essential aspect of engineering identity, it is
important to explore language use surrounding the problem solving processes.
Identity has recently emerged as a topic of considerably interest in engineering
education research (Johri & Olds, 2011; Tonso, 2014). Interest in identity is linked to an
increasing focus on situated learning. A situated perspective views knowledge as distributed
between people, and as such, learning is seen as an interactive process in which knowledge is
produced through the meaning making activities within a community of practice. A student’s
identities, as well as those of others with whom they interact, influence opportunities to

458 The Qualitative Report 2017
participate in the practices of a community. The identities of students therefore play a role in
students’ learning trajectories (Johri & Olds, 2011). From a constructivist perspective
identities are ontologically socially constructed and always understood in relation to their
environment.
There are several strands of literature on identity in engineering. We only briefly
mention them here because they are not directly relevant to our study. In one, discussions of
identity tend to focus on the socialization of students into the academic environment and into
the profession (Dannels, 2000; Du, 2006; Johri & Olds, 2011). Implicit in these writings is a
concern that identity affects students’ persistence in engineering education and preparation
for the engineering profession. Another strand of work examines what it means to be a
practicing engineer (Downey & Lucena, 2004; Hult et al., 2003; Trevelyan, 2010). In a third
strand, identity of undergraduate engineering students has been explored at the level of
campus culture (Tonso, 2006a), within student design teams (Dannels, 2000; Du, 2006;
Dunsmore et al., 2011; McNair, Newswander, Boden, & Borrego, 2011; Tonso, 2006b), as
revealed in student portfolios (Eliot & Turns, 2011), and from the perspective of an
individual minority student (Foor, Walden, & Trytten, 2007).
Of particular relevance to our work is the literature related to the role of problem-
solving in engineering. Many authors describe engineering as being primarily a problem-
solving activity (Donald, 2002; Sheppard, Macatangay, Colby, & Sullivan, 2008; Jonassen,
Strobel, & Lee, 2006; Yadav, Shaver, & Meckl, 2010; Yadav, Subedi, Lundeberg, &
Bunting, 2011), although Trevelyan (2010) has argued that professional engineers hide
behind a technical façade, downplaying the social aspects of their work. There is also work
that describes a disconnect either between engineering identity and engineering practice, or
between academic and professional identities. Several studies have found that engineering
students often draw a clear distinction between the classroom and the “real world.” For
example, Hult (2003) found that, although both freshmen and senior engineering students had
a clear notion of engineering knowledge and the engineering profession, they doubted
whether the two were linked. Similarly, Dunsmore et al. (2011) reported that students did not
see school experiences as integral to engineering practice and Dannels (2000) found that the
design processes exhibited in the classroom were primarily driven and shaped by academic
discourses where the instructor and teaching assistants were the most important customers
and the primary outcome was a good grade. Additionally, Donald (2002) noted that in
engineering there is “a continual tug-of-war between the theoretical and the professional”
(p.63). Students often feel that theory is emphasized over practice and they wish for more
practical hands-on learning experiences. As a result, some graduates find the transition to
professional practice to be a shocking experience.
Despite the perceived importance of problem-solving, our review shows that there is
little work that specifically examines the ways in which the types of problems students
encounter affect the development of their identities as engineers. While there are indications
that the problems students encounter in school are seen as unrelated to professional practice
(Hult, 2003; Dunsmore et al., 2011; Dannels, 2000; Donald, 2002), not much is known about
how these academic problems affect their identities as engineers. Our work aims to provide
an initial investigation into this area. Specifically, we examine how students describe their
identities through the language they use after solving academic problems in an academic
setting (i.e., individual problem-solving in a classroom-type environment).

Methods
Researchers’ Positioning
Our research team represents various disciplines and backgrounds. Two of us are
professors of engineering education and two have degrees in psychology. One of the authors
has extensive experience in qualitative research methodology. One of the authors received
formal training in engineering and has conducted research in both engineering and
engineering education. Another has an undergraduate degree in engineering and a graduate
degree in engineering education, with industrial experience between those two degrees. Most
of us have working and teaching experiences both in K-12 and post-secondary education
contexts both in the US and internationally, and some have also conducted research at labs
and various field contexts.
Our experiences within K-12 and post-secondary education, industry, and laboratories
and our culturally diverse backgrounds affect our views about engineering identities and the
role of problem-solving in engineering. We recognize that our primarily academic (as
opposed to industrial) collective experience may create a tendency for us to recognize
academic over “real-world” identities. At the same time, throughout the data collection and
analysis we were careful to stay sensitive to these past experiences.
Theoretical Perspective Guiding This Research
This study was guided by a constructivist theoretical perspective. It was our intention
to study engineering students’ individual meaning making processes and how students
describe their existing and emerging identities as engineers. A constructivist perspective
directed our focus on the unique features of individual experiences that highlight different
perceptions and experiences of reality of each individual (Hatch, 2002). Furthermore,
interviews provided insights into students’ multiple voices and perspectives including their
beliefs, reflections, and evaluations of the think aloud problem solving experience. The
students were viewed as active agents, constructing meaning and gaining knowledge as they
reflected on their learning process within a social context (Fosnot, 2005; Kincheloe, 2005;
Lincoln, & Guba, 2000). However, we also acknowledge the impact that researchers can have
on the construction of knowledge in social contexts.
Data Sources
Sample and data collection
Eight senior materials science and engineering students from a large southeastern
university in the US participated in this study. Three of the participants were women and five
were men. Seniors were recruited due to their advanced academic experience and level of
content knowledge in the field. Approval from the university’s Institutional Review Board
was obtained and all participant names used in this manuscript are pseudonyms.
Data collection involved individual semi-structured and open-ended interviews. The
interviews were conducted following think aloud sessions in which participants verbalized
their thoughts while solving four materials engineering problems. These problems involved
various aspects of mechanical behavior of materials and included tasks such as calculating
stresses and deformations, and selecting a material to satisfy defined criteria. The specific
problems used are shown in Appendix A. The problems were designed to be either closed- or
open-ended, and to require either few or many decision points to reach a solution. Thus each

problem occupied a unique spot on a 2x2 matrix of degree of open-endedness (closed or
open) and number of decisions points (few or many). Each individual think aloud session was
video recorded and transcribed verbatim. Analysis of the think aloud protocols for one of
these problems is reported in another publication (see Douglas, Koro-Ljungberg, McNeill,
Malcolm & Therriault, 2012). Members from the research team collectively viewed and
analyzed the think aloud videos to develop an individualized interview protocol for each
student. During the group video viewing sessions, key problem-solving decision points were
identified and used to generate interview questions that would provide deeper insight into the
beliefs, values, and attitudes that guided students’ problem-solving approaches. Timestamps
of the decision points were noted so that the video clips corresponding to the interview
questions were available during the interview if needed for elaboration or clarification
purposes. The follow-up interview was scheduled approximately two days following the
think aloud session in order to promote fresh recall of the think aloud problem solving
experience.
The follow-up interviews complemented the think aloud protocols, providing students
space to reflect on and explain their problem-solving processes in detail. A senior and junior
researcher collaboratively asked interview questions to make the interview more
conversational and interactive. During the interviews students were provided with their
written solutions as well as the video clips if needed. The interview protocols began with
standard questions that asked students to chronologically narrate their problem-solving
processes for each problem without using technical language. Specific questions tailored to
individual students’ critical decision points in the think aloud protocols questions (developed
from the group video viewing sessions) were also asked, and additional probes were added as
they were considered appropriate by the researchers. An example of a specific question is:
“You eliminated composites because you said they are ‘complex.’ What do you mean by
‘complex’ and why does that eliminate them?” Questions were also asked that were intended
to elicit students’ beliefs about problem-solving and engineering more broadly. An example
of such a question is “How do you think that the problems that you were solving here differ
from the problems that you’re going to face when you go to a job?” The follow-up interviews
typically lasted one hour; however, up to two hours were allocated for the interviews.
Students were compensated with a $60 gift card to a retail store for their participation.
Data analysis
To investigate students’ language-in-use we analyzed motifs and I-statements from
the interviews. First, all the interview transcripts were analyzed individually to determine key
motifs, similar to the themes or sequences of labels (for the analysis of the motifs see e.g.,
Gee, 2011a, 2011b; Fairclough, 2003) related to the participants’ values and beliefs. Key
portions of data were highlighted as representative samples. We noted similarities in the ways
in which participants were referring to their epistemological beliefs or behaviors (i.e., how
they conducted inquiry and organized knowledge respectively). Differences were also
identified based on participants’ interpersonal connection and intrapersonal awareness.
To be able to focus on the most representational aspects of the data we built our
analysis on the three main motifs from each participant. These were identified by determining
which motifs appeared most often in the data. After the three most representative motifs were
identified for each participant, we analyzed the motifs for statements where they referred to
themselves (Gee, 2011a). Because it was important for us to consider how participants used
language when they referenced themselves in the first person, these statements were referred
to as their “I-statements.” According to Gee (2011a) these I-statements can take five forms
including: (1) Cognitive statements referring to what an individual thinks or knows – that is, I

think, I know, I guess, (2) Affective Statements referring to what an individual talks about
desiring or liking – that is, I want, I like, (3) State and Action Statements referring to an
individual’s state or actions – that is, I am, I worked, (4) Ability and Constraint Statements-
referring to when an individual talks about being able to or having to do things - that is, I
can’t say, I have to do, and (5) Achievement Statements- referring to activities, desires and
efforts relating to their achievement, accomplishment or distinction – that is, - I challenge
myself, I aspire to go to an Ivy League School.
Lastly we analyzed the connection between language uses and identities by using
Gee’s identity building tasks to ask analytical questions related to the motifs and I-statements
describing participants’ identities and roles. Our analytical questions included questions such
as what socially recognizable identities participants enact in specific situations or what
identities they displayed that other people could recognize, how participants position
themselves and others, and what identities participants privilege or invite others to take up.
In this case, we used socially recognizable identities that we as engineers and teachers would
recognize. These identities (e.g., “Expert,” “Inquirer,” “Organizer,” and “Self-Doubter”) were
created through iterative research team discussions of participants’ motifs, vocabularies,
experiences, backgrounds, and reflections, based on various data sources and artifacts
collected including, interview transcripts, students’ work, video data, and field notes.
We would like to note that we only used some aspects of Gee’s work to analyze
students’ language-in-use. We believe that every analysis including discourse analysis is
always partial and incomplete. Furthermore, Gee does not provide a prescriptive case for a
singular use of discourse analysis. He explicitly states:
This book will introduce various tools of inquiry for discourse analysis and
strategies for using them. It will give a number of examples of the tools in
action, as well. But the reader should keep in mind that these tools of inquiry
are not meant to be rigid definition. Rather, they are meant to be “thinking
devices,” that guide inquiry in regard to specific sorts of data and specific sorts
of issues and questions. They are meant to be adapted for the reader’s own
purposes. They are meant, as well, to be transformed as the reader adapts them
to his or her own theory of the domain. (Gee, 2011a, pp. 11-12)
Gee (2011b) also encourages researchers to develop their own approaches and
contributions. “That is really what ‘how to’ means in this book: learn how to eventually go on
your own and choose your own companions on your path to understanding and intervention
in the world” (p. x)
According to Charmaz (2006) language plays a crucial how one codes and categorizes
information and data. No research is neutral because language confers forms, meanings, and
values. Text and data carries multiple meanings which are emphasized, highlighted, bought
into the readers’ attention differently based on the experiences and meaning making
processes of the reader. Yet this meaning making process is interactive and researchers move
between data and interpretation. As such scholars’ work often responses to the cultural and
socially constructed understandings about the world to generate insights that are likely to
transfer to other contexts and other research settings. To increase the trustworthiness of our
findings, analysis and interpretation activities were carried out collaboratively by the research
team. Team members from various disciplines engaged in bi-weekly conversations about the
emerging findings, their presence in data and meaningfulness to the engineering discourses.
We also used our study advisory board to provide feedback on the preliminary findings and
interpretations.

Findings
In this study we use Gee’s (2011) definition of identity: “different ways of being in
the world at different times and places for different purposes” (p. 3). Specifically, the context
is an academic environment in which students individually solve academic problems. As this
represents the primary approach to problem-solving for engineering undergraduates (in
homework problems and on exams) it is important to understand how students identify
themselves in this social setting. We would also like to note that even though each “identity”
is introduced individually identities were shifting, multiple, and continuously changing in
students’ narratives.
Five different discursive practices and uses of language were identified in this study.
Three were shared by multiple participants, while two were only associated with individual
participants. We found that students used language to describe their identities in somewhat
narrow ways; participants’ identities, as exemplified through their use of language, were
primarily constrained to an academic context. Although participants were prompted to freely
rearticulate their problem solving experiences in their own words during the interviews and
even though students were asked about their larger conceptual understanding of elements of
the problem (e.g., what makes a material complex) they did not offer many comments that
moved beyond the academic context in which they were immersed (i.e., a pedagogical use of
language). Participants also did not share many details about their experiences outside of the
classroom or how connections within a professional learning community including
internships and work experience have helped them to solve problems. In addition, most of the
participants’ use of language was disconnected from expectations about future work life and
their identities as problem solvers within a professional context.
Although some participants articulated their identities within the linguistic context of
engineering, their language was limited to the technical aspects of engineering problem
solving. In this context, the participants did not use language associated with a broader view
of engineering including social, political, or environmental considerations. With one
exception, participants’ language also presented individualistic views of engineering problem
solving.
Table 1. Identities and Their Descriptions
Identity Description
Self-doubter Ongoing questioning, intimidated by the problem solving
process
Confirmer Finds comfort from routines, follows text book examples
Reflector Strong self-awareness, frequent self-reflection
Expert Confidence in general knowledge about the field, how to locate
information, trusts in math and one’s existing knowledge
Practitioner Importance of practical application and common sense
Searcher Uses external resources and materials extensively and
sometimes as the only way to approach a problem
Organizer Importance of creating order and solving problems as a set of
specific tasks, neatness, usefulness

Simplifier Uses processes of elimination, utilizes “tricks” and shortcuts
Technocrat Formula-based approach to problem solving, searches for quick
and existing solutions
Rationalizer Finds justifications for his choices, reasoning
Independent
thinker
Personal preferences guide problem solving, uses past
experiences to guide problem
Strategizer Intentional and conscious use of resources and processes,
knowledge about alternatives and their strengths and benefits
Collaborative
learner
Views learning as a collaborative and collective activity
Mathematician Conceptualizes engineering problems as math problems
Our analysis revealed that participants assumed specific situated identities as problem
solvers and that these identities were also linked with language use (see Table 1). Figure 1
represents a summary of students’ different uses of language and identities, while Table 2
summarizes the conceptualizations and content of these language uses. As illustrated in the
figure some uses of language were shared among multiple participants (e.g., pedagogical,
engineering, and individualistic uses of language), while two students used language in more
context specific ways. Michael (all reported names are pseudonyms) described his
experiences through collaborative uses of language and Matthew used language describing
his identity as a mathematician. As indicated, participants also constructed their identities
within different linguistic contexts. In this way students described multiple simultaneous
identities and their views about them as problem solvers were contextualized and varied. The
exception was Jessica. Jessica positioned herself solely as a learner who was uncertain about
her knowledge and skills.
Table 2. Uses of Language Linked to Students’ Problem-Solving Identities
Use of language Description
Pedagogical Actions and language related to learning, being a good student,
expectations and values associated with teacher-student and
student-student interactions.
Engineering
focused
Actions and language associated with becoming an engineering
professional, skills required for solving engineering problems
through elimination, planning, and logical progression
Individualistic Actions and language highlighting individualistic values such as
intentionality, independence, and self-directed learning, focus on
experiential processes, self-assurance and confidence
Collaborative Actions and language emphasizing the role of peers, collaborative
learning and working, using peers to inform future learning, value
of collective meaning.
Math focused Actions and language focusing on equations, finding variables and
values, manipulation of equations and solving for unknown values.

Figure 1 Summary of students’ uses of language and constructed identities. All names are pseudonyms.
In the following sections we describe the language used by these students and how
this language was related to their identities in this context.
Pedagogical uses of language
The pedagogical uses of language provided a context for the students to describe how
they navigated within the realm of their academic majors and in the context of their
classroom experiences with professors and classmates. For example, Jessica was a female
from a racial group that is traditionally underrepresented in engineering who exhibited the

situated identity of a “self-doubter” throughout her problem-solving experience. Furthermore,
there was a strong tone of negativity throughout Jessica’s reflections of her problem-solving
experience. Throughout her data and present discourse, she showed awareness of her
weaknesses in problem-solving and how this shaped her solution process characterizing her
as a “self-doubter.” “I double-check a lot…I’m generally checking for things that I know…I
personally made mistakes in the past...I always mess up on my units, that’s a common error.”
In her reflections she also exemplified a common thread of negativity and self-doubt through
I-statements such as “I personally make mistakes,” “I always mess up,” and “I don’t know”
Additionally, her situated identity spoke to her tendency to focus on limitations both for
herself and the problem-solving process. “I didn’t know any benchmark materials to really
compare it to…how could I make an assumption?” Similarly, many of her cognitive
statements were framed by statements of uncertainty such as “I don’t know.”
Our interpretation of Joshua’s data portrayed him as a “reflector” and “conformer”
within the pedagogical use of language. Within his situated identity as a “reflector” Joshua
had a strong sense of awareness about his actions and emotional and mental states during his
problem solving experience. This was evident through frequent use of state and action I-
statements. For example, Joshua stated:
I am a much more conceptual person than detail oriented…when it comes to
doing things like this I’m more apt to make a mistake…I enjoy questions that
are more general and just pull on my knowledge of materials in general.
Joshua constantly referenced his own being and often compared himself to others. He
was also clearly aware of his strengths and weaknesses. He made assertions about how this
behavior translated to his classroom experiences through the pedagogical discourse such as,
“In a test situation, I’m trying to put down a correct answer…I was just so excited to know
what I was doing.” Joshua exemplified a “conformer” identity in this respect as he showed a
keen awareness of the processes required to gain partial credit from professors through his
problem-solving strategies. As he stated, “it may not be the best answer as long as I can
justify it.” This example further highlighted how he conformed to different academic
situations to maximize his performance during problem-solving. However, he also exhibited
the “conformer” identity in his categorization of his behavior in a test situation versus a job-
situation where he may have to complete a project. “I guess I started thinking of this not so
much as an exam, like a test question...I just thought of it as like a project I was given.”
Justin constructed his identity within a pedagogical use of language. He showed a
strong sense of self-awareness and doubt during his problem-solving. He reflected on his
failures and continuously processed his perceptions of doubt during the problem-solving
process. He wanted to provide a solution although he knew it “was going to be wrong.”
Justin’s self- doubt was also manifested in ways in which he described himself as an under
achiever who was less concerned with the outcomes of his problem-solving and more
interested in moving on quickly to other tasks. “So I saw two variables and I was like, okay, I
don’t have a clue how to get back there…I can just quickly solve the problem, be done with
it.” In addition, Justin compared his knowledge to real-life knowledge demonstrating a strong
awareness of situations where he thought classroom experiences needed to be validated
against a real-world context. In some instances, he described himself as a “technocrat” who
focused more on equations and calculations themselves without clearly understanding the
context of or reasons for using particular equations. He explained that he understood
equations but “did not understand why and how they correlate with real life situations.”

It was hard to relate what I was able to calculate which was corrosion,
corrosion rate but then also trying to get the fracture toughness with the
applied force. I didn’t know how to correlate those two things…I understood
equations, I just didn’t understand necessarily why and how that correlates to
real life situations.
Christopher, in turn, perceived himself as an “expert” and “practitioner” in the context
of pedagogical language. Christopher drew on a personal knowledge developed through
classroom experience even if the concepts he was encountering were vague to him. His
method of corroborating between an established lexicon and personal reasoning was to
default to the first concepts to come to mind. “I just kind of went with an easy default with
steel…just because it’s cheaper.” Additionally, in his examples Christopher moved from
searching through his experience with materials mentioned in the classroom context, to
memory of equations or similar problems to direct his problem-solving. “I just knew
exactly…what chapter to look in and just found where it talked about that and then quickly
flipped to it.” As with Ashley, who also described herself as an expert, Christopher exhibited
a reliance on his expertise with certain problems and procedures as a guide during his
problem-solving.
In comparison to the expert identity exemplified by Christopher and Ashley,
Amanda’s data brought to the forefront her rather superficial conceptual connections. As a
“searcher” she was constantly engaging with the textbook, flipping back and forth between
various sections. She employed narrow searches for specific information in times of
uncertainty. Her near constant searching in the textbook highlighted her need to constantly
verify the accuracy of her work via example problems in an attempt to receive as much
partial credit as possible as she would in a classroom situation. In terms of I-statements, she
used “state statements” prior to ability and action statements: “I was getting irate with not
being able to do anything…I can figure this out, so I’ll just figure this out instead…I didn’t
start doing calculations...I was more trying to find relationships.” These I-statements showed
a pattern of reflection on her state to determine paths that would allow her to move ahead
with her problem solving.
Engineering focused use of language
Engineering focused use of language shaped the perceptions of some participants,
namely Justin, Christopher, Michael, and Amanda. Engineering language was reflected in the
discussions of efficiency and reflections on characteristics or behaviors crucial to the
engineering field in general. For Amanda, this was exemplified through her “organizer” and
“simplifier” identities and in the importance of having a plan in the problem-solving process
before attempting any calculations and sticking to that plan in order to achieve success.
Amanda showed a preference for planning her calculations: “What’s the point of solving for
it now if I’m going to have to solve for it later, I might as well just get everything written out
and how I want to plan everything first.” She wrote “everything out” and prioritized
organizing the information and having a clear plan as a first step in the problem-solving
process. As an “organizer” Amanda highlighted the importance of efficiency and her ability
to achieve a correct solution with minimum resources such as time, energy, and cost. Her
preference for good organization was also supported through her “simplifier” identity that
aimed to “look at limits and cut things out that way first” using the “process of elimination.”
Justin, in turn, exemplified an alternative aspect of the engineering focused use of language in
his emphasis on the sales aspect of engineering as different from technical aspects. For
example, he referred to the aspects of both “engineering” and “business” worlds. His dual

focus on being both an engineer and “people person” exemplified his situated identity as a
“rationalizer” in explaining his reasoning for taking certain problem-solving approaches.
I can acclimate a lot better to personal relationships and the business
orientation of the technical side…it’s something I’m naturally inclined to
do...I’m better suited for business and things like that...I want to be on the
technical side of business.
Justin associated the technical side of engineering with a required knowledge base
that is important in problem-solving, and saw experience in the field as crucial to developing
this knowledge base. “I haven’t done what some people have done like 10 years of work in
the field so they just know off the top of their head.” Justin had a strong awareness of his
personal strengths and weaknesses and he associated his strengths with the sales aspect of
engineering and his weaknesses with the technical side of engineering practice.
Christopher, also made strong differentiations between different aspects of
engineering and how these differences might affect his approaches to problem-solving. It was
important for Christopher to be able to communicate engineering knowledge to different
audiences in various ways and he believed this skill differentiated his problem-solving
approach. For this reason, he saw practical experience in the classroom context, becoming a
“practitioner” as integral to his development as an engineer. While he appreciated the
scientific focus in the academic context, he also valued being able to communicate
meaningful information through practical terms and making science more meaningful for
engineering professionals. He asserted that in his classes,
I wish we had more…not necessarily realistic, but less science behind it, I
mean the science is good…but more of how you then use that in the
job…strain hardening and all these little equations are very useful theoretical,
or for research, but to use that in the field if you’re talking to someone...unless
they’re another metallurgist…they’re not going to have any idea what you’re
talking about...I may know what I’m talking about but it doesn’t help me tell
them what they need to know.
Michael, in turn, operated within the engineering focused language in his situated
identity as a “strategizer.” He described first developing a clear conceptualization of the
problem, repeatedly stating that at the beginning of each problem he solved in our study, and
he visualized and contextualized the problem, “Just trying to get a full-scale representation of
what it might look like,” “I generally think of platforms as squares or rectangles.” Michael
used various strategies to understand and “frame” the problem, including drawings from
information learned in previous classes, “I took a corrosion class last semester and that was
one of the main points of it”; applying heuristics developed from experience, “It’s a series of
thin strands and thin strands to me means small…1 mm is a good starting point I would
think”; and incorporating real-world constraints, “In my mind I see that big, see a steel cable
that big, it’s not going to be exceptionally large.” For both conceptualizing and solving the
problem, Michael emphasized the importance of viewing the problem within a real-world
engineering context:
Generally you have probably an expected value of what would compare it to
and what I’ve learned is to be reasonable…if you look at a bridge and it says
[the cross-section of the member’s] going to be 9 feet by 9 feet, no one’s going

to believe that. If you don’t compare your answers you’re probably going to
get it wrong to what you know in real life.
As such, Michael’s reasoning strategies and decisions reflected the complex and
dynamic nature of real-world engineering problem-solving. He viewed problems from
different perspectives, “I picked the range of values for the strength, and then also the cost,”
applied complex strategies, and presented multiple possible solutions to open-ended
problems.
Individualistic use of language
Ashley and Joshua made connections to the individualistic use of language when they
described their problem-solving processes. For example, Ashley’s descriptions made
continuous references to individualistic values such as intentionality, independence, and self-
directed learning. She described her “independent thinker” identity through her trust in her
own experiential knowledge. She showed a strong belief in her ability to solve posited
problems and suggested that learned information and her previous problem-solving
experience should benefit her more than knowledge gained from other problem-solvers or
second-hand notes scribbled in textbooks.
Maybe I don’t trust what other people would write in the book…I don’t like
books that other people have highlighted or underlined...I was sure of myself...
I knew what the equation was and I didn’t really need the book to validate
that.
Similarly, Joshua trusted in his existing knowledge. Joshua shared that,
as long as you know a few facts about the material and just stuff that you’ve
learned in general like metals are good at this, steel’s awesome at this. Like
you could just pretty much answer it in your head. Like I could have done just
about as good a job not looking at the book.
Furthermore, Ashley accessed resources such as the book simply as a point of verification or
validation that she was on the right path.
I looked it up in the book just to make sure...to make sure I had it right. I felt
like this was kind of a minor unimportant calculation...I knew how to do it, it
wasn’t a big deal...I could just do it off on the side...I probably could’ve even
done it just on my calculator.
She also had a strong sense of direction and confidence in her own abilities and saw
this as integral to her problem-solving. “I like to do things myself, to be able to understand
them...I like to write it myself or do it myself and that’s how I learn.” This example also
supported her pedagogical value in learning through doing as important for mastery during
problem-solving or conceptualization. Whereas some other participants showed a level of
dependency on the textbook supplied to participants as they solved the problems, Ashley used
the text solely for verification in moments of doubt, indicating that she recognizes that
textbooks are not error-proof and she is considering this in her problem-solving.

I usually think I’ll be able to solve this problem and I’ll be able to find the
information I need…I just remembered it from learning it…I know books
always have mistakes in them...If it was something I knew less about I would
probably be more inclined to believe what the book has to say.
Ashley’s independence was also evident through her level of confidence in drawing
from past successes, whether it was in her classroom experiences or her performance as a
student. “I guess I’ve always been a good student myself…I usually think...oh I’ll be able to
solve this problem and I’ll be able to find the information I need.” This confident approach
and sense of individualism in problem solving as gained through her pedagogical experiences
supported the value she placed in her abilities during problem-solving exercises.
Joshua was also confident in himself but differently than Ashley. For example, Joshua
explained that individual justification is important for his problem solving: “I’m trying to put
down a correct answer that I can justify. Like it might not have to be the best answer as long
as I can justify it. Like it says justify your choice of material, how you arrived at this choice.
So if I put down something that will hold up that thing it’s good enough.”
Collaborative use of language
Michael’s reflections during his problem-solving processes were situated within real-
life contexts, including both his present academic situation as well as his perceptions of
future workplace settings. In his description, Michael showed a strong awareness for the
central role of the “collaborative” use of language in real-life engineering. He stated that
when solving complex engineering problems, “generally you’re going to be working on a
problem like this [in groups]. I mean it’s a rare case that someone tasks to you figuring out
what the problem is. That’s generally in a group problem.” He reflected on working in “a
group setting,” explaining that while collaborating with others, it is important to “talk it out,
figure out exactly what you’re trying to work for” in order to have everyone understand the
“scope of the problem” and keep the common goals of the problem “in mind every time you
do something.” Furthermore, Michael also discussed the benefits and frustrations of talking
out loud in group settings, stating that, “It’s helpful to me to categorize my thought process to
be able to let someone else know what I’m thinking. That probably helps me learn a lot more
than just doing the problem.”
Math focused use of language
The influence of mathematics was evident throughout Matthew’s use of language.
Matthew placed high value on his mathematical background and approached all of the
materials engineering problems as merely mathematical problems. This perspective was
characterized by a seemingly blind trust in mathematics as an infallible tool that leads to
absolute truths. “Well, basically that if you have the right equations then you can solve
anything.” Matthew drew on general mathematics knowledge from fields including
trigonometry and geometry, as well as more specific mathematics concepts in engineering
such as Miller’s indices and figures-of-merit to solve the problems. However, Matthew did
not display an in-depth understanding of such mathematical concepts, but focused almost
entirely upon the algebraic manipulation of equations.
I decided that as long as I could justify the material, I could choose any
material. I basically just took a material that could possibly be used in this
situation and then plugged it into the equations that I had already generated.

Matthew referred to his mathematics background as a core value that defined his
identity in problem solving. His mathematical training was the basis of the established
patterns on which he developed his problem-solving approach. Matthew’s identity as a
“mathematician” was predominantly defined by his ability to find and use equations. “I knew
there was an equation and I knew I could probably find the equation in the book. I couldn’t
remember the equation…” When unable to retrieve an equation from memory, Matthew
reported consulting the textbook or other sources such as the internet for specific equations.
“Because I depend a lot on equations and so I guess if I am unsure how two things relate then
I go directly to a book and try to find an equation…on Google they’ll pull up the equation
instantly.” Likewise, Matthew’s main form of inquiry during the problem-solving session
involved searching for equations in the textbook.
Non-contextualized pattern-based confidence emerged in Matthew’s belief that a
single unique solution exists for each problem. This belief was manifested in his search for an
absolute, correct answer that Matthew firmly believed was attainable via a series of
calculations.
I’m not sure if that was the question that they wanted me to answer. I also
remembered that there was a way to calculate the angle using Miller indices
instead of pure geometry…but I didn’t see it (in the book) and so I decided to
just go with the geometry of the problem.
Under circumstances in which he was unsure of whether the calculations were moving him
towards a solution, and even when he had a suspicion that he may not be approaching the
problem correctly, Matthew still did not abandon his attempts at reaching a solution via
algebraic manipulations of equations.
Matthew’s problem-solving process can be characterized by somewhat limited
application of equations to the variables at hand without an understanding of the underlying
phenomena that the equations represent. This was exemplified by justifications of equation
choices such as, “Because basically throughout the classes that I have had, every time I see a
design problem the way to solve it was to use a figure-of-merit.” When solving problems,
Matthew focused his attention on arranging, connecting, and/or eliminating the terms of
equations. Often, the goal of manipulating equations was to develop an equation, or a series
of equations, that would coincide with the variables presented in the problem, or to arrange
an equation similarly to equations presented in example problems in the textbook. On many
occasions, Matthew’s use of language revolved around his success or failure at manipulating
equations which he viewed as an essential component of problem solving. “Um, was
basically just playing around with the equations and trying to move them into something
recognizable that I could go to the book for.”
Discussion
From a constructivist perspective individuals and their identities are always
constructed in a relation to the social: social norms, expectations, socially accepted behavior,
roles, and interactions with others. Socially constructed identities and language practices, in
turn, influence the ways in which students perceive themselves as learners, problem-solvers
and also future professionals. These socio-cultural practices and discourses shape individuals’
actions and language use within social groups but they are also often internalized, reflecting
individual behavior. More specifically, how students situate themselves in different language
practices, describe their thinking and problem solving while solving problems in the class

setting can also possibly speak to the ways in which these students situate themselves when
solving engineering problems as future professionals.
The language used by participants in this study exhibited a very small number of
identities. While this study is specifically limited to a particular problem-solving task, much
of the classroom practice in engineering is situated in this type of context. Thus, we feel that
the ways in which students talked about their problem-solving processes provided an
important window (although admittedly not the only one) into how they saw themselves as
engineers.
For Gee (2011a, 2011b) language has a dual role. We use language to communicate
based on the situation we are in and at the same time language influences that situation. This
may seem circular, but Gee points out language is a process of continuous building in which
“language and institutions ‘bootstrap’ each other into existence in a reciprocal process
through time” (p. 10). We can see this process in the way many of our participants talked
about their problem-solving processes. The clearest case was perhaps Matthew, who
constructed a reality of the problem as an analytically solvable mathematical problem.
Similarly, Jessica’s use of language kept her within the academic setting as a
problem-solver. The language she used to describe her lack of self-confidence was focused
on problem-solving as a pedagogical activity. As with Matthew, this limited Jessica’s ability
to see problem-solving as something more than academic. In this context, it is interesting to
note that Jessica began the interview by asking what grade she received on the problems. Her
seeking feedback is important to consider, in light of stereotype research suggesting that
subtle comments about grading can introduce stereotype threat to those who are vulnerable
(i.e., the false claim that women aren’t as skilled at math as men; Good, Aronson, & Harder,
2008).
Some other students in this study demonstrated similar relationships between
language and problem-solving reality, although these are more nuanced because they
exhibited multiple identities. One of the common uses of language, exhibited by our
participants (Christopher, Amanda, and Justin), is the dual use of pedagogical and
engineering foci. This was exemplified in the way they talked about problem-solving as an
academic exercise (“I can just quickly solve the problem, be done with it.” – Justin) and
engineering as “real-world” (“…these little equations are very useful theoretical, or for
research, but to use that in the field…they’re not going to have any idea what you’re talking
about…” – Christopher). This distinction between the academic world and the world of
engineering practice appears consistently in our data, even outside of the I-statements that
were the focus of our analytical approach. For example, Amanda compared tests in classes
with engineering practice by saying, “in like the real world I guess, but there probably would
still be some constraints there because it’s going to be cost or it’s going to be that or you’ll
just have a lot of ideas and like you can do this, you can do that, you can do that, you can do
that. So whereas tests it’s kind of like whoop, you want to make sure you learn some things.”
Similarly, Christopher talked about how one of the problems was structured saying that it
“doesn’t necessarily take into account processing and construction and labor and profit and
everything else involved in the cost of building a bridge.” Thus, while students’ responses
outside the I-statements brought up these aspects of engineering practice, these identities
were seen as separate from their identities as engineering students. Additionally, students did
not internalize or own these identities by referring to the “real-world” aspects of engineering
within their personalized I-statements.
Again, in these statements we see both the way language expresses students’ identities
and the way language constructs the reality they live in. For example, Amanda’s statement
that in the real world you can “have a lot of ideas” while in the academic world “you want to
make sure you learn some things” limits the ways in which she is able to navigate the two

worlds. By limiting herself in this way she prevented herself from seeing the academic world
as a place where you can have ideas, or the real world as a place where you can learn.
Conclusions
Participants’ uses of language and resulting identities as problem solvers in this study
were limited and connected to a specific academic context, one in which mathematical
formulas, simplistic problem solving heuristics, and grades are dominant features of
academic discourses. It is possible that participants’ descriptions of their problem-solving
processes in this type of problem solving situation did not elicit (what we would consider)
creativity or out-of-box thinking; rather, our participants’ language use suggests that they
were more likely to adopt a passive approach. Even when the pedagogical uses of language
were not explicitly identified as influencing a student’s identity, elements of the academic
context were clear in the language used by participants.
This study also prompted us to consider more carefully what type of assumptions
about knowing and learning is embedded in “typical” classroom and research activities. Our
problem-solving activity and think-aloud prompts were designed to resemble normative
classroom contexts, including “typical” materials available when students are asked to solve
problems in engineering education classrooms and during the tests. However, it is important
to note that designing a study that centers around the think-aloud method and individual
problem solving activities is likely to generate a specific type of knowledge about learning
and engineering related to that context. Thus, it is likely that the setting for this study resulted
in a perception by participants of the problems as being academic in nature. The problems
used in this study were created to assess engineering students’ abilities to solve both closed-
ended and open-ended academic problems. The problem-solving activity was conducted in a
university office, and presented in a paper-and-pencil format with a classroom textbook as a
reference, closely reflecting the context in which students receive academic training. We also
propose that when students’ identities are rooted in academic and linguistic contexts in which
they traditionally solve problems students might not be sufficiently encouraged and prompted
to develop more complex language uses and types of problem solving skills that would be
beneficial in their professional lives as engineers.
It is certainly possible that these students are able to see connections between the
problems they solve in “school” and “real world” problems and would prefer to use language
in more varied ways. However, Downey (2008) argues that the focus of problem-solving in
the academic context of engineering education promotes a narrow view of engineering
identity and that those who work outside the boundaries of the defined problem-solving space
are judged to be “incorrect.” Some of our participants did talk about grades and “being
correct,” suggesting that they may be limited in their views by the academic context.
Not all of the students in this study approached the problems from an entirely
academic perspective or discourse. Michael was able to see beyond the academic setting and
emphasized the importance of understanding the real-world context of engineering problems,
suggesting that it is possible for some students to make connections beyond the academic
setting. Even in Michael’s case, however, the connection to the “real-world” was limited to
technical considerations. Our students did not articulate complex views about clients,
environment, or societal aspects of engineering problem solving during their problem solving
or even afterwards when asked to reflect on the occurred problem solving processes.
Although some participants in this study expressed frustration with a perceived disconnect
between their academic experiences and their view of “real world” engineering practice, their
use of language did not reveal a critical view of the power dynamics or values they
encountered in their academic experiences. In this particular problem solving context

participants constructed their identities as problem solvers primarily through or within
individualistic discourses. For example, reflections on working within a team, solving
problems creatively generating approaches outside text book examples, identifying with cross
cultural beliefs and values were mostly absent in our data.
While our findings are based on a limited number of students in a specific context and
other interpretations certainly are possible, they do reveal some fruitful areas for additional
study connecting engineering students’ identities as problem-solvers to the wider socio-
political influences that define engineering. In particular, the apparent disconnect between
“academic engineering” and engineering practice needs to be investigated further to identify
whether it occurs in other contexts, and if so, how academic practices lead to this disconnect.
This could involve think-alouds with student teams, students working on open-ended real
world problems, or practicing engineers (for an example, see Sherrett et al., 2013).
Ultimately, this line of study could begin to address important questions about the education
of future engineers: What are the implications of the current academic setting for how
students ultimately practice engineering? What pedagogical practices promote self-
identification of students as engineers? One example of how this could be done comes from
Downey (2008). He describes a course in which liberal arts is seen as a component of
engineering, with the goal of moving engineering problem-solving for these students beyond
traditional mathematical analysis and into the consideration of alternative cultures and
perspectives. Another example comes from Paretti and McNair (2012) who describe the
identity formation of students in a design class which has been deliberately formulated to
involved close collaboration among engineering, industrial design, and marketing students
throughout the design process. The experience of these students contrasts with the typical
design course, as well as the other case examined in their paper, an industrial design team. In
that industry team, the various functions were siloed, and engineering largely filled a
subordinate role to the marketing decisions. As they point out, “[t]his case [the academic
design class], then, suggests what engineering identities could be, given less constrained
institutional expectations and more integrative discourses” (Paretti & McNair, 2012, p. 75). It
might also be illuminative to study more in depth “ill-formed” problems and strategies
students are using to solve these types of problems. In addition, a future study could also
address how practicing engineers and students work together to solve or frame a problem. In
addition to modeling how engineers think about framing/solving the technical aspects of the
problem, the practicing engineers might add to the problem solving the contextual
information that students might not be aware of. In order to connect students to the
worldviews and language associated with broader engineering practices, alternate approaches
such as these may be needed to move students beyond the limitations of the academic setting.
References
Berger, P. L., & Luckmann, T. (1966). The social construction of reality. New York, NY:
Anchor Books.
Dannels, D. P. (2000). Learning to be professional. Journal of Business and Technical
Communication, 14(1), 5-37.
Donald, J. G. (2002). Learning to think: Disciplinary perspectives. San Francisco, CA:
Jossey-Bass.
Douglas, E., Koro-Ljungberg, M., McNeill, N, Malcolm, Z.& Therriault, D. (2012). Moving
beyond formulas and fixations: Solving open-ended engineering problems. European
Journal of Engineering Education., 37 (6), 627-651
Downey, G. L. (2008). The engineering cultures syllabus as formation narrative: Critical
participation in engineering education through problem eefinition. St. Thomas Law

Journal, 5(2), 101-130.
Downey, G. L., & Lucena, J. C. (2004). Knowledge and professional identity in engineering:
code-switching and the metrics of progress. History and Technology, 20(4), 393–420.
Du, X. Y. (2006). Gendered practices of constructing an engineering identity in a problem-
based learning environment. European Journal of Engineering Education, 31(1), 35–
42.
Dunsmore, K., Turns, J., & Yellin, J. M. (2011). Looking toward the real world: Student
conceptions of engineering. Journal of Engineering Education, 100(2), 329–348.
Dym, C. L., Agogino, A. M., Eris, O., Frey, D. D., & Leifer, L. J. (2005). Engineering design
thinking teaching and learning. Journal of Engineering Education, 94(1), 103–120.
Eliot, M., & Turns, J. (2011). Constructing professional portfolios: Sense-making and
professional identity development for engineering. Undergraduates, 100(4), 630-654.
Fairclough, N. (2003). Analysing discourse: Textual analysis for social research. London,
UK: Routledge.
Fosnot, C. (Ed.). (2005). Constructivism: Theory, perspectives, and practice (2nd ed.). New
York, NY: Teachers College Press
Foor, C. E., Walden, S. E., & Trytten, D. A. (2007). I wish that I belonged more in this whole
engineering group: Achieving individual diversity. Journal of Engineering Education,
96(2), 103–15.
Gee, J. P. (2011a). An introduction to discourse analysis. New York, NY: Routledge.
Gee, J. P. (2011b). How to do discourse analysis. New York, NY: Routledge.
Good, C., Aronson, J., & Harder, J. A. (2008). Problems in the pipeline: Stereotype threat and
women's achievement in high-level math courses. Journal of Applied Developmental
Psychology, 29(1), 17-28.
Hatch, A. (2002). Doing qualitative research in education settings. Albany, NY: State
University of New York Press.
Hult, H., Dahlgren, M. A., Dahlgren, L. O., & af Segerstad, H. H. (2003). Freshmen’s and
seniors’ thoughts about education, professional identity and work. Australian
Association for Research in Education 2003 Conference Papers. Melbourne: ACER
Library.
Johri, A., & Olds, B. (2011). Situated engineering learning: Bridging engineering education
research and the learning sciences. Journal of Engineering Education, 100(1), 151–
185.
Jonassen, D. H., Strobel, J., & Lee, C. B. (2006). Everyday problem solving in engineering:
Lessons for engineering educators. Journal of Engineering Education, 95(2), 139-
151.
Jonassen, D. H. (2014). Engineers as problem solvers. In A. Johri & B. M. Olds (Eds.),
Cambridge handbook of engineering education (pp. 103-118). New York, NY:
Cambridge University Press.
Kincheloe, J. (2005). Critical constructivism. New York, NY: Peter Lang.
Lincoln, Y., & Guba, E. (2000). Paradigmatic controversies, contradictions, and emerging
confluences. In N. Denzin, & Y. Lincoln (Eds.), Handbook of qualitative research.
(2nd ed., pp. 163-188). Thousand Oaks, CA: Sage.
Marra, R. M., Palmer, B., & Litzinger, T. A. (2000). The effects of a first-year engineering
design course on student intellectual development as measured by the Perry scheme.
Journal of Engineering Education, 89(1), 39–46.
McNair, L. D., Newswander, C., Boden, D., & Borrego, M. (2011). Student and Faculty
Interdisciplinary Identities in Self-Managed Teams. Journal of Engineering
Education, 100(2), 374–396.
Paretti, M., & McNair, L. (2012) Analyzing the intersections of institutional and discourse

identities in engineering work at the local level. Engineering Studies 4(1), 55–78.
Sheppard, S., Colby, A., Macatangay, K., & Sullivan, W. (2008). What is engineering
practice? International Journal of Engineering Education, 22(3), 429–438.
Sherrett, B. U., Nefcy, E. J., Gummer, E. S., & Koretsky, M. D. (2013). An expert solution to
assess an industrially situated, computer-enabled design project. Journal of
Engineering Education, 102(4), 541-576.
Shin, N., Jonassen, D. H., & McGee, S. (2003). Predictors of well-structured and ill-
structured problem solving in an astronomy simulation. Journal of Research in
Science Teaching, 40(1), 6–33.
Tonso, K. L. (2006a). Student engineers and engineer identity: Campus engineer identities as
figured world. Cultural studies of science education, 1(2), 273–307.
Tonso, K. L. (2006b). Teams that work: Campus culture, engineer identity, and social
interactions. Journal of Engineering Education, 95(1), 25–37.
Tonso, K. L. (2014). Engineering identity. In A. Johri & B. M. Olds (Eds.), Cambridge
handbook of engineering education research (pp. 267-282). Cambridge, UK:
Cambridge University Press.
Trevelyan, J. (2010). Reconstructing engineering from practice. Engineering Studies, 2(3),
175-195. doi:10.1080/19378629.2010.520135
Yadav, A., Shaver, G. M., & Meckl, P. (2010). Lessons learned: Implementing the case
teaching method in a mechanical engineering course. Journal of Engineering
Education, 99(1), 55–69.
Yadav, A., Subedi, D., Lundeberg, M. A., & Bunting, C. F. (2011). Problem-based learning:
Influence on students’ learning in an electrical engineering course. Journal of
Engineering Education, 100(2), 253–280.
Appendix A
Engineering Problems Used During Think-Aloud
1. A cylindrical rod of single crystal nickel with a radius of 2 cm yields when a tensile
force of 17.47 kN is applied along its length. This force is being applied in the [001]
direction. Slip occurs on the (111) plane in the [ 01
1 ] direction. What is the critical
resolved shear stress for this slip system?
2. An iron bar with the dimensions as shown below is being used as a structural support
member underwater in the presence of HCl. Corrosion occurs only on the top surface
(marked T in the figure below) and the corrosion current measured on this surface is
1.58x10-2
amperes. This structural member is inspected periodically using ultrasound,
and the smallest internal crack that can cause failure is 6 mm (you may assume there
are no surface cracks). The plane strain fracture toughness of the iron is 41 MPa-m1/2
.
The force applied to this member is 1,750 kN in the direction as shown in the figure.
How long can this member remain in service before it needs to be replaced?

3. A platform is to be suspended from a ceiling by a series of thin strands of a material.
It is estimated that the load on each strand will be 12,000 N. The design requires a
safety factor of 2. Select an appropriate material for these strands and the strand
diameter. Justify your choice of material and show how you arrived at this choice.
4. A truss bridge requires 40 members, each of which is 12 feet long and experiences its
maximum load when in tension. The bridge is designed so that the maximum stress
experienced by each member is 60 MN. You are bidding on the contract to provide
these 40 members. Provide a recommendation as to the specifications for these
members and cost for the job.
Author Note
Mirka Koro-Ljungberg (Ph.D., University of Helsinki) is a Professor of qualitative
research at the Arizona State University. Her scholarship operates in the intersection of
methodology, philosophy, and socio-cultural critique and her work aims to contribute to
methodological knowledge, experimentation, and theoretical development across various
traditions associated with qualitative research. She has published in various qualitative and
educational journals and she is the author of Reconceptualizing Qualitative Research:
Methodologies without Methodology (2016) published by SAGE. She may be contacted at
Mary Lou Fulton Teachers College, Arizona State University, PO BOX 87181, Tempe AZ
85287; Correspondence regarding this article can be addressed directly to: mirka.koro-
ljungberg@asu.edu.
Elliot P. Douglas is Associate Professor of Environmental Engineering Sciences at the
University of Florida. He conducts research on engineering education, with a focus on
problem-solving, critical thinking, diversity and inclusion in engineering, and the use of
qualitative methods in engineering education research. Correspondence regarding this article
can also be addressed directly to: Engineering School of Sustainable Infrastructure &
Environment, University of Florida 204 Black Hall, Box 116450, Gainesville, FL 32611;
Email: elliot.douglas@essie.ufl.edu.
Nathan McNeill is an instructor of mechanical engineering with the University of
Colorado Boulder where he teaches upper division undergraduate courses in the thermal
sciences. He has a PhD in engineering education from Purdue University and does research
on student problem solving. Correspondence regarding this article can also be addressed
directly to: University of Colorado Boulder/Colorado Mesa University Mechanical
Engineering Partnership Program, 2510 Foresight Circle, Grand Junction, CO 81505; Email:
nmcneill@colorado.edu.
Dr. David J. Therriault is an Associate Professor in the School of Human
Development and Organizational Studies in the College of Education at the University of
Florida. He received his undergraduate degree in psychology from the University of New
Hampshire and his M. A. and Ph.D. in cognitive psychology from the University of Illinois at
T
F
50 cm
10
cm
5 cm

Chicago. Dr. Therriault's primary research interests include the representation of text in
memory, comprehending time and space in language, the link between attention and
intelligence, the use of perceptual symbols in language, creativity and problem solving, and
educational issues related to these topics. Correspondence regarding this article can also be
addressed directly to: School of Human Development and Organizational Studies
(SHDOSE), University of Florida Gainesville, FL 32611-7047; Email:
therriault@coe.ufl.edu.
Dr. Christine Lee Bae’s research focuses on applying principles of educational and
cognitive psychology to teaching and learning across the K-20 continuum. She has worked on
several interdisciplinary STEM education projects that include studies of college engineering
students, middle school science teaching and learning, and secondary science teacher
preparation. She also examines cognition in higher education, exploring strategies that
promote meaningful learning. Correspondence regarding this article can also be addressed
directly to: Department of Foundations of Education, Virginia Commonwealth University,
Oliver Hall, Office 4074, 1015 W. Main Street, P.O. Box 842020, Richmond, VA 23284-
2020; Email: clbae@vcu.edu.
Dr. Zaria Malcolm is a Fulbrighter who earned her PhD. in Higher Education
Administration with minor in Qualitative Methodology from the University of Florida. She
also holds a bachelors and master’s degree from the University of the West Indies, Mona
Jamaica. Currently, Dr. Malcolm holds the position of Vice Principal of Academic Affairs &
Institutional Advancement at the Excelsior Community College, Jamaica. In her current post
she has responsibility for institutional partnerships, academic quality assurance, strategic
planning, accreditation and institutional research and overall leadership of the institution’s
academic division. Her research agenda focuses on diversity issues with special focus on
international education issues, in addition to a focus on qualitative methodology-based
research. She is specifically interested in focusing on higher education issues affecting the
Caribbean education system and stakeholders directly and indirectly associated with such.
Correspondence regarding this article can also be addressed directly to:
zaria.malcolm@ecc.edu.jm.
This material is based upon work supported by the National Science Foundation under
Grant No. DRL-0909976.
Copyright 2017: Mirka Koro-Ljungberg, Elliot P. Douglas, Nathan J. McNeill, David
J. Therriault, Christine S. Lee, Zaria Malcolm, and Nova Southeastern University.
Article Citation
Koro-Ljungberg, M., Douglas, E. P., McNeill, N. J., Therriault, D. J., Lee, C. S., & Malcolm,
Z. (2017). Academic problem-solving and students’ identities as engineers. The
Qualitative Report, 22(2), 456-478. Retrieved from
http://nsuworks.nova.edu/tqr/vol22/iss2/7

Academic Problem-Solving And Students Identities As Engineers

More Related Content

Similar to Academic Problem-Solving And Students Identities As Engineers (20)

More from Todd Turner (20)

Recently uploaded (20)

Academic Problem-Solving And Students Identities As Engineers