Arduino Project Presentation Slides.pptx
- 1. GETTING STARTED Presented by: Joseph Adeyemi BEGINNERS ARDUINO COURSE WITH ARDUINO
- 2. • 1. Introduction • 2. What is Arduino? • 3. Arduino Hardware • 4. Installing the Arduino IDE • 5. Your First Sketch • 6. Uploading Code • 7. Working with Sensors • 8. Arduino Libraries • 9. Project Showcase • 10. Questions &Answers session OVERVIEW
- 4. INTRODUCTION • Welcome! • "Getting Started with Arduino for Beginners" • In this course, you will embark on an exciting journey into the world of electronics and programming. • Arduino is an open-source hardware and software platform designed for creating interactive electronic projects. It's used by hobbyists, students, and professionals to build a wide range of devices. Introduction What is Arduino
- 5. ARDUINO HARDWARE • An Arduino board consists of a microcontroller (the brain), input/output pins (to connect components), a power supply (for voltage), and a USB interface (for programming and communication). Arduino Hardware
- 7. INSTALLING THE ARDUINO IDE OR SOFTWARE • To start coding for Arduino, you need the Arduino IDE. Download it from the official website, install it on your computer, and you're ready to go! https://www.arduino.cc/ Installing The Arduino IDE
- 8. YOUR FIRST SKETCH(CODE) • In the Arduino IDE, you write code in a sketch. A basic example is the "Blink" sketch, which makes an LED connected to the board blink on and off. First Sketch
- 9. UPLOADING (CODE) Connect the Arduino hardware via USB, by choosing the connection type USB. Choose the board type and the port number from the Choose board and Choose port menus. Then, select the libraries that you want to include in your Arduino server. Click Program to begin uploading the server to your Arduino board.
- 10. WORKING WITH SENSORS Sensors are essential for input in Arduino projects. You'll learn how to connect and read data from sensors, such as a light-dependent resistor (LDR) to measure light levels.
- 11. Arduino Libraries Libraries are pre-written code packages that simplify complex tasks. For instance, the Servo library makes it easy to control servo motors or the LiquidCrystal library for driving LCD displays.
- 12. PROJECT SHOWCASE Explore a beginner project: You are required to blink a Led with a code. Write a code to switch on and off a Led. (Light Emitting Diode)
- 13. YOUR FIRST SKETCH(CODE) • In the Arduino IDE, you write code in a sketch. A basic example is the "Blink" sketch, which makes an LED connected to the board blink on and off. First Sketch
- 14. Q & A SESSION
- 15. Thank you for participating +2349060717943 Let's connect [email protected] Joseph Adeyemi