![Damping Force [Viscous Damping]: Due to viscous damping, it is
proportional to velocity & is given by,
Damping force is denoted by either D or B or F.
Consider an ideal frictional element dash-pot shown in figure below which
has negligible mass and elasticity. Let a force be applied on it. The dashpot
will be offer an opposing force which is proportional to velocity of the body.](https://image.slidesharecdn.com/biocontrolsystemslecture2-240815060329-7061f262/85/Biocontrol-Systems-Lecture-2-for-Biomedical-Engineering-students-pptx-14-320.jpg)
![Mechanical Rotational Systems
• The model of rotational mechanical systems can be obtained by using
three elements; moment of inertia [J] of mass, dash pot with rotational
frictional coefficient [B] and torsional spring with stiffness[k].
• When a torque is applied to a rotational mechanical system, it is
opposed by opposing torques due to moment of inertia, friction and
elasticity of the system.
• The torque acting on rotational mechanical bodies is governed by
Newton‘s second law of motion for rotational systems.](https://image.slidesharecdn.com/biocontrolsystemslecture2-240815060329-7061f262/85/Biocontrol-Systems-Lecture-2-for-Biomedical-Engineering-students-pptx-18-320.jpg)
Biocontrol Systems Lecture 2 for Biomedical Engineering students.pptx
- 1. SYSTEMS &THEIR REPRESENTATIONS LECTURE #2 By EngAlamiga Gerald Job [email protected]
- 2. Content • Introduction • Transfer function • Mathematical Model of Control Systems • Analogous systems
- 3. Introduction • A simpler system or element maybe governed by first order or second order differential equation. • When several elements are connected in sequence, say “n” elements, each one with first order, the total order of the system will be nth order. • In general, a collection of components or system shall be represented by nth order differential equation.
- 4. • In control systems, transfer function characterizes the input output relationship of components or systems that can be described by Linear Time Invariant Differential Equation. • In the earlier period, the input - output relationship of a device was represented graphically • In a system having two or more components in sequence, it is very difficult to find graphical relation between the input of the first element and the output of the last element. This problem is solved by transfer function. • The input- output relationship in a linear time invariant system is defined by the transfer function.
- 5. • The features of the transfer functions are; It is applicable to Linear Time Invariant system. It is the ratio between the Laplace Transform of the o/p variable to the Laplace Transform of the i/p variable. It is assumed that initial conditions are zero. It is independent of i/p excitation. • T.F is used to obtain systems o/p response.
- 6. Transfer Function • Transfer function of a LTIV system is defined as the ratio of the Laplace Transform of the output variable to the Laplace Transform of the input variable assuming all the initial condition as zero. Properties of Transfer Function • The transfer function of a system is the mathematical model expressing the differential equation that relates the output to input of the system. • The transfer function is the property of a system independent of magnitude and the nature of the input. • The transfer function includes the transfer functions of the individual elements. But at the same time, it does not provide any information regarding physical structure of the system. • The transfer functions of many physically different systems shall be identical.
- 7. • If the transfer function of the system is known, the output response can be studied for various types of inputs to understand the nature of the system. • If the transfer function is unknown, it may be found out experimentally by applying known inputs to the device and studying the output of the system. How to obtain the transfer function (T. F.) • Write the differential equation of the system. • Take the L. T. of the differential equation, assuming all initial condition to be zero. • Take the ratio of the output to the input. This ratio is the T. F.
- 8. Mathematical Model of control systems • A physical system is a collection of physical objects connected together to serve an objective. An idealized physical system is called a Physical model. • Once a physical model is obtained, the next step is to obtain Mathematical model. • When a mathematical model is solved for various i/p conditions, the result represents the dynamic behavior of the system. • A control system is a collection of physical object connected together to serve an objective. • The mathematical model of a control system constitutes a set of differential equation
- 9. Analogous Systems • The concept of analogous system is very useful in practice. Since one type of system may be easier to handle experimentally than another. • A given electrical system consisting of resistance, inductance & capacitances may be analogous to the mechanical system consisting of suitable combination of Dash pot, Mass & Spring.
- 10. Advantages of Electrical Systems 1) Many circuit theorems, impedance concepts can be applicable. 2) An Electrical engineer familiar with electrical systems can easily analyze the system under study & can predict the behavior of the system. 3) The electrical analogous system is easy to handle experimentally.
- 11. Mechanical Translational systems • The model of mechanical translational systems can be obtain by using three basic elements; mass, spring and dash-pot. • When a force is applied to a translational mechanical system, it is opposed by opposing forces due to mass, friction and elasticity of the system. • The force acting on a mechanical body is governed by Newton‘s second law of motion. For translational systems it states that the sum of forces acting on a body is zero.
- 12. Translational System • It has 3 types of forces due to elements. Inertial Force: Due to inertial mass.
- 13. Force balance equations of idealized elements • Consider an ideal mass element shown in figure above which has negligible friction and elasticity. • Let a force be applied on it. The mass will offer an opposing force which is proportional to acceleration of a body. • Let • By Newton’s Second Law;
- 14. Damping Force [Viscous Damping]: Due to viscous damping, it is proportional to velocity & is given by, Damping force is denoted by either D or B or F. Consider an ideal frictional element dash-pot shown in figure below which has negligible mass and elasticity. Let a force be applied on it. The dashpot will be offer an opposing force which is proportional to velocity of the body.
- 15. • Let • Here, • By Newton‘s second law,
- 16. Spring Force: Spring force is proportional to displacement.
- 17. • Let • Here, • By Newton‘s second law, • Consider an ideal elastic element spring shown in figure below which has negligible mass and friction.
- 18. Mechanical Rotational Systems • The model of rotational mechanical systems can be obtained by using three elements; moment of inertia [J] of mass, dash pot with rotational frictional coefficient [B] and torsional spring with stiffness[k]. • When a torque is applied to a rotational mechanical system, it is opposed by opposing torques due to moment of inertia, friction and elasticity of the system. • The torque acting on rotational mechanical bodies is governed by Newton‘s second law of motion for rotational systems.
- 19. Torque balance equations of idealized elements • Consider an ideal mass element shown in figure below which has negligible friction and elasticity. • The opposing torque due to moment of inertia is proportional to the angular acceleration.
- 20. • Let • Here; • By Newton‘s second law;
- 21. • Consider an ideal frictional element dash pot shown in figure below which has negligible moment of inertia and elasticity. • Let a torque be applied on it. The dash pot will offer an opposing torque which is proportional to angular velocity of the body.
- 22. • Let • Here • By Newton‘s second law;
- 23. • Consider an ideal elastic element, torsional spring as shown in figure below which has negligible moment of inertia and friction. • Let a torque be applied on it. The torsional spring will offer an opposing torque which is proportional to angular displacement of the body.
- 24. • Let • Here; • By Newton‘s second law;
- 25. Analogous Quantities in Translational & Rotational systems The electrical analogy of the mechanical system can be obtained by; a) Force Voltage analogy: (F.V) b) Force Current analogy: (F.I)
- 27. Modeling of electrical system • Electrical circuits involving resistors, capacitors and inductors are considered. • The behavior of such systems is governed by Ohm‘s law and Kirchhoff‘s laws • Resistor: Consider a resistance of ohms carrying current Amps as shown in figure below, then the voltage drop across it is V
- 28. • Inductor: Consider an inductor H carrying current Amps as shown in figure below, then the voltage drop across it can be written as .
- 29. • Capacitor: Consider a capacitor “ F carrying current Amps as shown in figure below, then the voltage drop across it can be written as .
- 30. Steps for Modeling of Electrical System • Apply Kirchhoff‘s voltage law or Kirchhoff‘s current law to form the differential equations describing electrical circuits comprising of resistors, capacitors, and inductors. • Form Transfer Functions from the describing differential equations. • Then simulate the model. Example:
- 31. Electrical Systems • LRC circuit. Applying Kirchhoff‘s voltage law to the system shown. We obtain the following equation;
- 32. • Equation (1) & (2) give a mathematical model of the circuit. Taking the L.T. of equations (1) & (2), assuming zero initial conditions, we obtain;
- 33. Analogous Systems • Let us consider a mechanical (both translational and rotational) and electrical system as shown in the figure below.
- 35. Force – Voltage Analogy
- 36. Force – Current Analogy
- 37. Solved Problem 1. Find the system equations for system shown in the figure below. And also determine f-v and f-i analogies.
- 41. THANKYOU Covid’s Real But Christ the Cure