C mode class

Clustered Ontap Class
Hector Martinez, 8 years consulting
David Brown, Michico
Josh Sanders, Atlanta IBM
Scott Anctil, EDT,
Suresh Pachiyappan,
Day 5










Stats show
Core dump
Set diag
Set admin
Stats
Sysstat –x 1
System node run –node <node name>
Reallocate measure | start | status

Mroot is now available…
the diffrence between N-blade vs D-blade
What could be the maxim rsize/wsize? To get a file on the B.P. from Hector late
CP: Consistency Points, types of
B: Back-to-Back CPs, bad perf issue
T: timer
: Rubel Khan RubelK@unitekeducation.com
Dir of OP

Share the soft copy of the book

Only A-sync in C-mode?
8.1.2 to support SMB 3.0
Migrate vFiler beta tool ask Chad
HW Universe app
DNS Load balancing
https://docs.google.com/file/d/0Bx9t1-yJwAlMczZxR2lXN2RWRFE/edit?usp=sharing

login: admin
(cluster setup)

Welcome to the cluster setup wizard.

You can enter the following commands at any time:
"help" or "?" - if you want to have a question clarified,
"back" - if you want to change previously answered questions, and
"exit" or "quit" - if you want to quit the cluster setup wizard.
Any changes you made before quitting will be saved.

You can return to cluster setup at any time by typing "cluster setup".
To accept a default or omit a question, do not enter a value.

Do you want to create a new cluster or join an existing cluster? {create, join}:
create

System Defaults:
Private cluster network ports [e0a,e0b].
Cluster port MTU values will be set to 1500.
Cluster interface IP addresses will be automatically generated.

Do you want to use these defaults? {yes, no} [yes]:

It can take several minutes to create cluster interfaces...

Step 1 of 5: Create a Cluster
You can type "back", "exit", or "help" at any question.

Enter the cluster name: netappu
Enter the cluster base license key: VMZIVZGKWVMADF

Creating cluster netappu

Starting cluster support services .....

Cluster netappu has been created.

Step 2 of 5: Add Feature License Keys

Enter an additional license key []: BAKJZZGKWVMADF RQQQXZGKWVMADF Z0FNAAHKWVMADF
Z0FNAAHKWVMADF NUHYZZGKWVMADF DL0FYZGKWVMADF

BAKJZZGKWVMADF RQQQXZGKWVMADF Z0FNAAHKWVMADF Z0FNAAHKWVMADF
NUHYZZGKWVMADF
DL0FYZGKWVMADF is not a valid license key.

User-specified feature license keys for the cluster. Examples of licensed
cluster features are storage network protocols such as CIFS, NFS, and iSCSI.
Obtain keys from your sales or support representative. Enter feature license
keys one at a time. When you finish entering feature license keys press Enter
to continue to the next section.


Enter an additional license key []: BAKJZZGKWVMADF

NFS License was added.

Enter an additional license key []: RQQQXZGKWVMADF

CIFS License was added.

Enter an additional license key []: Z0FNAAHKWVMADF

Z0FNAAHKWVMADF is not a valid license key.



Enter an additional license key []: ZOFNAAHKWVMADF

iSCSI License was added.

Enter an additional license key []: Z0FNAAHKWVMADF

Z0FNAAHKWVMADF is not a valid license key.



Enter an additional license key []: ZOFNAAHKWVMADF

iSCSI License was added.

Enter an additional license key []: NUHYZZGKWVMADF

SnapMirror Data Protection License was added.

Enter an additional license key []: DL0FYZGKWVMADF

DL0FYZGKWVMADF is not a valid license key.



Enter an additional license key []: DLOFYZGKWVMADF

SnapRestore License was added.

Enter an additional license key []:

Step 3 of 5: Set Up a Vserver for Cluster Administration

Enter the cluster administrator's (username "admin") password:

Retype the password:

Enter the cluster management interface port [e0c]: e0c

Enter the cluster management interface IP address: 192.168.66.120
Enter the cluster management interface netmask: 255.255.255.0
Enter the cluster management interface default gateway: 192.168.66.2

A cluster management interface on port e0c with IP address 192.168.66.120 has been created. You can
use this address to connect to and manage the cluster.

Enter the DNS domain names: netappu.com
Enter the name server IP addresses: 192.168.66.1
DNS lookup for the admin Vserver will use the netappu.com domain.

Step 4 of 5: Configure Storage Failover (SFO)

SFO is licensed.
SFO will be enabled when the partner joins the cluster.

Step 5 of 5: Set Up the Node

Where is the controller located []: NetAppU
Enter the node management interface port [e0f]: e0f
Enter the node management interface IP address: 192.168.66.121
Enter the node management interface netmask: 255.255.255.0
Enter the node management interface default gateway: 192.168.66.2

A node management interface on port e0f with IP address 192.168.66.121 has been created.

Cluster setup is now complete. To begin storing and serving data on this
cluster, you must complete the following additional tasks if they have
not already been completed:

1) Join additional nodes to the cluster by running "cluster setup" on
those nodes.
2) If in a HA configuration, verify that storage failover is enabled by
running the "storage failover show" command.
3) Create a Vserver by running the "vserver setup" command.

You can access your cluster to complete these tasks by:

1) Using the NetApp System Manager to manage cluster netappu at 192.168.66.120.
NetApp System Manager must be at version 2.0 or above.
You can download NetApp System Manager from
http://support.netapp.com

2) Logging in to the cluster by using SSH (secure shell) from your work station:
ssh admin@192.168.66.120

Exiting the cluster setup wizard.

login: login: admin
Password:
Login incorrect
login: admin
Password:
Login incorrect
login: admin
Password: netappu1
netappu::> cluster show
Node

Health Eligibility

--------------------- ------- -----------netappu-01

true true

netappu::>

…..
PuTTY to node2

login: admin
(cluster setup)




Do you want to create a new cluster or join an existing cluster? {create,
join}:
join

System Defaults:




Step 1 of 3: Join an Existing Cluster

Enter the name of the cluster you would like to join [netappu]:

Joining cluster netappu

Starting cluster support services ....

This node has joined the cluster netappu.


SFO is licensed.


Enter the node management interface port [e0f]: e0f
Enter the node management interface netmask [255.255.255.0]:
Enter the node management interface default gateway [192.168.66.2]:

A node management interface on port e0f with IP address
192.168.66.122 has been created.


those nodes.


1) Using the NetApp System Manager to manage cluster netappu at
192.168.66.120.

2) Logging in to the cluster by using SSH (secure shell) from your work
station:

ssh admin@192.168.66.120


login: admin
Password:
netappu::> cluster show
Node

Health Eligibility

--------------------- ------- -----------netappu-01

true true

netappu-02

true true

2 entries were displayed.

netappu::> network interface show
Logical Status
Vserver
Home

Network

Current

Interface Admin/Oper Address/Mask

Current Is
Node

----------- ---------- ---------- ------------------ ------------- ------- ----

Port

netappu
cluster_mgmt up/up 192.168.66.120/24 netappu-01 e0c
true
netappu-01
clus1

up/up 169.254.144.226/16 netappu-01 e0a

true

clus2

up/up 169.254.124.226/16 netappu-01 e0b

true

mgmt1

up/up 192.168.66.121/24 netappu-01 e0f

true

netappu-02
clus1

up/up 169.254.89.72/16 netappu-02 e0a

clus2

up/up 169.254.244.76/16 netappu-02 e0b

mgmt1

up/up 192.168.66.122/24 netappu-02 e0f


netappu::>

hector@unitekeducation.com or hecmtz@gmail.com

login: admin
Password:
netappu::> ?

true
true
true

up
antivirus>
cluster>
dashboard>
event>
exit
history

Go up one directory
Manage antivirus
Manage clusters
Display dashboards
Manage system events
Quit the CLI session
Show the history of commands for this CLI session

job>

Manage jobs and job schedules

lun>

List LUN (logical unit of block storage) commands

man

Display the on-line manual pages

network>

Manage physical and virtual network connections

redo

Execute a previous command

rows

Show/Set the rows for this CLI session

run

Run interactive or non-interactive commands in
the node shell

security>

The security directory

set

Display/Set CLI session settings

sis

Manage volume efficiency

snapmirror>
statistics>

Manage SnapMirror
Display operational statistics

storage>

Manage physical storage, including disks,
aggregates, and failover

system>
top

The system directory
Go to the top-level directory

volume>

Manage virtual storage, including volumes,
snapshots, and mirrors

vserver>

Manage Vservers

netappu::>
netappu::> storage ?
aggregate>

Manage storage aggregates

array>

The array directory

disk>

Manage physical disks

errors>

The errors directory

failover>

Manage storage failover

load>

The load directory

path>

The path directory

raid-options>

The raid-options directory

netappu::storage> cluster

netappu::cluster> ?
contact-info>
create
ha>
identity>

Manage contact information for the cluster.
Create a cluster
Manage high-availability configuration
Manage the cluster's attributes, including name
and serial number

join

Join an existing cluster using the specified
member's IP address

modify

Modify cluster node membership attributes

peer>

Manage cluster peer relationships

setup

Setup wizard

show

Display cluster node members

statistics>

Display cluster statistics

netappu::cluster statistics> ?
show

Display cluster-wide statistics

netappu::cluster> man cluster

cluster

Data ONTAP 8.1

cluster

NAME
cluster -- Manage clusters

DESCRIPTION
The cluster commands enable you to create and manage Data
ONTAP 8 ClusterMode clusters.

SUBDIRECTORIES
contact-info> - Manage contact information for the cluster.

ha> - Manage high-availability configuration

identity> - Manage the cluster's attributes, including name and serial
number

peer> - Manage cluster peer relationships

statistics> - Display cluster statistics

COMMANDS
create - Create a cluster

join - Join an existing cluster using the specified member's IP address

modify - Modify cluster node membership attributes

setup - Setup wizard

show - Display cluster node members

Data ONTAP 8.1

-o-

Data ONTAP 8.1

~
~netappu::cluster> man cluster modify
cluster modify

Data ONTAP 8.1

cluster modify

NAME
cluster modify -- Modify cluster node membership attributes

AVAILABILITY
This command is available to cluster administrators at the admin
privilege
level.

DESCRIPTION
The cluster modify command modifies the cluster attributes of a
node,
including its eligibility to participate in the cluster.

At the advanced privilege level, you can use the command to specify
whether a node holds epsilon. Epsilon is an extra fractional vote that
enables quorum to form using slightly weaker requirements. For
example,
two out of four eligible nodes are sufficient to form quorum if one of
those two nodes holds epsilon.

PARAMETERS
-node {<nodename>|local} - Node

Use this parameter to specify the name of the node to modify. If
you
do not specify a node, the command runs on the local node.

[-eligibility {true|false}] - Eligibility
Use this parameter with the value true to specify that the node is
eligible to participate in the cluster. Use this parameter with the
value false to specify that the node is not eligible to participate in
the cluster.

If you modify a node as ineligible to participate in the cluster, the
command prompts you for confirmation before it runs.

EXAMPLES
This example modifies a node to make it eligible to participate in
the
cluster.

cluster1::> cluster modify -node node3 -eligibility true

Data ONTAP 8.1

-o-

Data ONTAP 8.1

Q
netappu::cluster> storage aggr

netappu::storage aggregate> modify ?
[-aggregate] <aggregate name>

Aggregate

[ -raidtype|-t {raid_dp|raid4} ]

RAID Type

[ -maxraidsize|-s <integer> ]

Max RAID Size

[ -snapshot-autodelete {on|off} ]
[ -ha-policy {sfo|cfo} ]

Automatic Snapshot Deletion

HA Policy

[ -free-space-realloc {on|off|no_redirect} ]
Free Space Reallocation
[ -percent-snapshot-space <percent> ] Space Reserved for Snapshot
Copies
[ -hybrid-enabled {true|false} ]

Hybrid Enabled

[ -force-hybrid-enabled|-f [true] ] Force Marking of Aggregate as
Hybrid
Enabled

netappu::storage aggregate> modify

netappu::storage aggregate> scrub ?
[-aggregate] <aggregate name> Aggregate
[ -raidgroup <text> ]

RAID Group

[-action] {start|stop|resume|suspend|status}
Action

netappu::storage aggregate> modify -state ?
offline
online
restricted
netappu::storage aggregate> volume ?
autosize

Set/Display the autosize settings of the
flexible volume.

clone>

Manage FlexClones

copy>

Manage volume copy operations

create

Create a new volume

delete

Delete an existing volume

destroy

Destroy an existing volume

efficiency>
file>
member>

File related commands
Manage constituent volumes of striped volumes

modify

Modify volume attributes

mount

Mount a volume on another volume with a
junction-path

move>

Manage volume move operations

offline

Take an existing volume offline

online

Bring an existing volume online

qtree>

Manage qtrees

quota>

Manage Quotas, Policies, Rules and Reports

rename

Rename an existing volume

restrict

Restrict an existing volume

show

Display a list of volumes

size
snapshot>

Set/Display the size of flexible volume.
Manage snapshots

unmount

Unmount a volume

netappu::storage aggregate> volume

netappu::storage aggregate> set -privilege advanced

Warning: These advanced commands are potentially dangerous; use
them only when
directed to do so by NetApp personnel.

Do you want to continue? {y|n}: y

netappu::storage aggregate*> volume ?
add-members
autosize

*Add members to an existing striped volume
Set/Display the autosize settings of the
flexible volume.

clone>

Manage FlexClones

copy>

Manage volume copy operations

create

Create a new volume

delete

Delete an existing volume

destroy
efficiency>
file>
make-vsroot
of

Destroy an existing volume
File related commands
*Designate a non-root volume as a root volume
the Vserver

member>

Manage constituent volumes of striped volumes

modify

Modify volume attributes

mount

Mount a volume on another volume with a
junction-path

move>

Manage volume move operations

offline

Take an existing volume offline

online

Bring an existing volume online

qtree>

Manage qtrees

quota>

Manage Quotas, Policies, Rules and Reports

rename

Rename an existing volume

restrict

Restrict an existing volume

show

Display a list of volumes

size
snapshot>

Set/Display the size of flexible volume.
Manage snapshots

unmount

Unmount a volume

netappu::storage aggregate*> volume

netappu::storage aggregate*> set admin

netappu::storage aggregate>

netappu::storage aggregate> network interface show
Logical Status
Vserver
Home

Network

Current


Current Is
Node

Port

----------- ---------- ---------- ------------------ ------------- ------- ---netappu
true
netappu-01
clus1

up/up 169.254.144.226/16 netappu-01 e0a

true

clus2

up/up 169.254.124.226/16 netappu-01 e0b

true

mgmt1

up/up 192.168.66.121/24 netappu-01 e0f

true

netappu-02
clus1

up/up 169.254.89.72/16 netappu-02 e0a

clus2

up/up 169.254.244.76/16 netappu-02 e0b

mgmt1

true
true

up/up 192.168.66.122/24 netappu-02 e0f

true


netappu::storage aggregate> net int sho
Error: Ambiguous command. Possible matches include:
network interface show
network interface show-routing-group
network interface show-zones

netappu::storage aggregate> ne in show
(network interface show)
Logical Status
Vserver
Home

Network

Current


Current Is
Node

----------- ---------- ---------- ------------------ ------------- ------- ---netappu

Port

true
netappu-01
clus1

up/up 169.254.144.226/16 netappu-01 e0a

true

clus2

up/up 169.254.124.226/16 netappu-01 e0b

true

mgmt1

up/up 192.168.66.121/24 netappu-01 e0f

true

netappu-02
clus1

up/up 169.254.89.72/16 netappu-02 e0a

clus2

up/up 169.254.244.76/16 netappu-02 e0b

mgmt1

up/up 192.168.66.122/24 netappu-02 e0f


netappu::storage aggregate>

Day 2
NOW Site searching for System Configration guide/diagram
Only change disk ownership on spare
85% customer disable auto giveback
from Henry PAN to Everyone:
GM Class:>)

true
true
true

from Hector Martinez to Everyone:
Good morning Henry!
What's the advantage of DS4486? Thanks
Cool, when will you share the e-book with us? Thanks
:>) Thanks
Cool:>) Can't wait to get all your files!
How much performance hit could be? Thanks
Thanks
What's the diffrence compare with FAST VP from EMC? Thanks
OK. Thanks
Thanks

from Scott Anctil to Everyone:
For Flash Pool is RAID DP still recomeded or RAID 4?
http://support.netapp.com/matrix

login: admin
Password:
netappu::> stor disk show
(storage disk show)
Usable
Disk

Container

Size Shelf Bay Type

Position Aggregate Owner

---------------- ---------- ----- --- ----------- ---------- --------- -------netappu-01:v4.16

-

- - unassigned present -

-

netappu-01:v4.17

-


-

netappu-01:v4.18

-


-

netappu-01:v4.19

-


-

netappu-01:v4.20

-


-

netappu-01:v4.21

-


-

netappu-01:v4.22

-


-

netappu-01:v4.24

-


-

netappu-01:v4.25

-


-

netappu-01:v4.26

-


-

netappu-01:v4.27

-


-

netappu-01:v4.28

-


-

netappu-01:v4.29

-


-

netappu-01:v4.32

-


-

netappu-01:v5.16
netappu-01

1020MB

- - aggregate dparity aggr0

netappu-01:v5.17
netappu-01

1020MB

- - aggregate parity

aggr0

netappu-01:v5.18
netappu-01

1020MB

- - aggregate data

aggr0

Usable
Disk

Container

Size Shelf Bay Type


---------------- ---------- ----- --- ----------- ---------- --------- -------netappu-01:v5.19
01

1020MB

- - spare

present -

netappu-

netappu-01:v5.20
01

1020MB

- - spare

present -

netappu-

netappu-01:v5.21
01

1020MB

- - spare

present -

netappu-

netappu-01:v5.22
01

1020MB

- - spare

present -

netappu-

netappu-01:v5.24
01

1020MB

- - spare

present -

netappu-

netappu-01:v5.25
01

1020MB

- - spare

present -

netappu-

netappu-01:v5.26
01

1020MB

- - spare

present -

netappu-

netappu-01:v5.27
01

1020MB

- - spare

present -

netappu-

netappu-01:v5.28
01

1020MB

- - spare

present -

netappu-

netappu-01:v5.29
01

1020MB

- - spare

present -

netappu-

Usable
Disk

Container

Size Shelf Bay Type


---------------- ---------- ----- --- ----------- ---------- --------- -------netappu-01:v5.32
01

1020MB

- - spare

present -

netappu-

netappu-02:v4.16

-


-

netappu-02:v4.17

-


-

netappu-02:v4.18

-


-

netappu-02:v4.19

-


-

netappu-02:v4.20

-


-

netappu-02:v4.21

-


-

netappu-02:v4.22

-


-

netappu-02:v4.24

-


-

netappu-02:v4.25

-


-

netappu-02:v4.26

-


-

netappu-02:v4.27

-


-

netappu-02:v4.28

-


-

netappu-02:v4.29

-


-

netappu-02:v4.32

-


-

netappu-02:v5.16 1020MB
aggr0_netappu_02_0

- - aggregate dparity
netappu-02

Usable
Disk

Container

Size Shelf Bay Type


---------------- ---------- ----- --- ----------- ---------- --------- --------

aggr0_netappu_02_0

netappu-02

aggr0_netappu_02_0

- - aggregate data
netappu-02

netappu-02:v5.19
02

1020MB

- - spare

present -

netappu-

netappu-02:v5.20
02

1020MB

- - spare

present -

netappu-

netappu-02:v5.21
02

1020MB

- - spare

present -

netappu-

netappu-02:v5.22
02

1020MB

- - spare

present -

netappu-

netappu-02:v5.24
02

1020MB

- - spare

present -

netappu-

netappu-02:v5.25
02

1020MB

- - spare

present -

netappu-

netappu-02:v5.26
02

1020MB

- - spare

present -

netappu-

Usable
Disk

Container

Size Shelf Bay Type


---------------- ---------- ----- --- ----------- ---------- --------- -------netappu-02:v5.27
02

1020MB

- - spare

present -

netappu-

netappu-02:v5.28
02

1020MB

- - spare

present -

netappu-

netappu-02:v5.29
02

1020MB

- - spare

present -

netappu-

netappu-02:v5.32
02

1020MB

- - spare

present -

netappu-

netappu-02:v6.16

-


-

netappu-02:v6.17

-


-

netappu-02:v6.18

-


-

netappu-02:v6.19

-


-

netappu-02:v6.20

-


-

netappu-02:v6.21

-


-

netappu-02:v6.22

-


-

netappu-02:v6.24

-


-

netappu-02:v6.25

-


-

netappu-02:v6.26

-


-

netappu-02:v6.27

-


-

Usable
Disk

Container

Size Shelf Bay Type


---------------- ---------- ----- --- ----------- ---------- --------- -------netappu-02:v6.28

-


-

netappu-02:v6.29

-


-

netappu-02:v6.32

-


-

netappu-02:v6.33

-


-

netappu-02:v6.34

-


-

netappu-02:v6.35

-


-

netappu-02:v6.36

-


-

netappu-02:v6.37

-


-

netappu-02:v6.38

-


-

netappu-02:v6.39

-


-

netappu-02:v6.40

-


-

netappu-02:v6.41

-


-

netappu-02:v6.42

-


-

netappu-02:v6.43

-


-

netappu-02:v6.44

-


-

netappu-02:v6.45

-


-

netappu-02:v6.48

-


-


netappu::>
netappu::> disk assign -disk netappu-01 v4* -owner netappu-01

Error: 'v4*' was not expected. Please specify -fieldname first.

netappu::> disk assign -disk netappu-02 v4* -owner netappu-02

Error: 'v4*' was not expected. Please specify -fieldname first.

netappu::> stor aggr show
(storage aggregate show)
Aggregate
Status

Size Available Used% State #Vols Nodes

RAID

--------- -------- --------- ----- ------- ------ ---------------- -----------aggr0

900MB 20.12MB 98% online

1 netappu-01

raid_dp,

normal
aggr0_netappu_02_0

1 netappu-02

raid_dp,

normal

netappu::>

netappu::> volume show
Vserver Volume
Used%

Aggregate State

Type

Size Available

--------- ------------ ------------ ---------- ---- ---------- ---------- ----netappu-01
vol0

aggr0

online

RW

851.5MB 629.2MB 26%

netappu-02
vol0

aggr0_netappu_02_0
online

RW

851.5MB 618.9MB 27%


netappu::> stor aggr create ?
(storage aggregate create)
{ [ -nodes <nodename>, ... ]

Aggregate
Nodes

[-diskcount] <integer>

Number Of Disks

[ -chksumstyle <checksum style> ]

Checksum Style

[ -disktype|-T {ATA | BSAS | FCAL | FSAS | LUN | MSATA | SAS |
SATA | SSD} ]
Disk Type
[ -disksize <integer> ]

Disk Size(GB)

[ -diskrpm|-R <integer> ]

Disk RPM

| [-disklist|-d] <disk path name>, ... } Disks
[ -allow-same-carrier [true] ]

Allow Same RAID Group Within

Carrier

RAID Type


Max RAID Size

[ -simulate [true] ]

Simulate Aggregate creation

[ -volume-style {flex|striped} ]
[ -allow-mixed|-f [true] ]
[ -block-type|-B {32-bit|64-bit} ]

Volume Style
Allow Disks With Different RPMs
Block Type

netappu::> stor aggr create
netappu::> stor aggr create -aggr n01_aggr1 -node netappu-01 diskcount 3

[Job 19] Job succeeded: DONE

netappu::>

Aggregate
Status


RAID

--------- -------- --------- ----- ------- ------ ---------------- -----------aggr0


1 netappu-01

raid_dp,

normal
aggr0_netappu_02_0

1 netappu-02

raid_dp,

normal
n01_aggr1 900MB 899.9MB 0% online
raid_dp,
normal

0 netappu-01

netappu::> stor aggr show -aggr n01_aggr1

Aggregate: n01_aggr1
Size: 900MB
Used Size: 116KB
Used Percentage: 0%
Available Size: 899.9MB
State: online
Nodes: netappu-01
Number Of Disks: 3
Checksum Style: block
Disks: netappu-01:v5.19,
netappu-01:v5.20,
netappu-01:v5.21
Number Of Volumes: 0
Plexes: /n01_aggr1/plex0(online)
RAID Groups: /n01_aggr1/plex0/rg0 (block)
RAID Type: raid_dp
Max RAID Size: 16

RAID Status: raid_dp, normal
Checksum Enabled: true
Checksum Status: active
Inconsistent: false
Hybrid: false
Total Hybrid Cache Size: 0B
Automatic Snapshot Deletion: on
HA Policy: sfo
Free Space Reallocation: off
Space Reserved for Snapshot Copies: 0%
Hybrid Enabled: false
Volume Style: flex
Has Mroot Volume: false
Has Partner Node Mroot Volume: false
Is Root: false
Block Type: 64-bit
Space Used By metadata for Volume Efficiency: 0B

netappu::>

netappu::> aggr show -aggr n01_aggr1 -instance

Size: 2.64GB
Used Size: 148KB
Used Percentage: 0%
Available Size: 2.64GB
State: online
Nodes: netappu-01
Number Of Disks: 5
netappu-01:v5.20,
netappu-01:v5.21,
netappu-01:v5.22,
netappu-01:v5.24
RAID Type: raid_dp

Max RAID Size: 16
Inconsistent: false
Hybrid: false
HA Policy: sfo
Volume Style: flex
Is Root: false
Block Type: 64-bit

netappu::>

netappu::> stor aggr create ?

Aggregate

{ [ -nodes <nodename>, ... ]

Nodes

[-diskcount] <integer>

Number Of Disks

[ -chksumstyle <checksum style> ]

Checksum Style

[ -disktype|-T {ATA | BSAS | FCAL | FSAS | LUN | MSATA | SAS |
SATA | SSD} ]
Disk Type
[ -disksize <integer> ]

Disk Size(GB)

[ -diskrpm|-R <integer> ]

Disk RPM

| [-disklist|-d] <disk path name>, ... } Disks
[ -allow-same-carrier [true] ]

Allow Same RAID Group Within

Carrier

RAID Type


Max RAID Size

[ -simulate [true] ]
[ -volume-style {flex|striped} ]
[ -allow-mixed|-f [true] ]

Simulate Aggregate creation
Volume Style
Allow Disks With Different RPMs

[ -block-type|-B {32-bit|64-bit} ]

Block Type

netappu::> stor aggr create -aggr n02_fp1 -node netappu-02 -diskcount
10

netappu::>

netappu::> stor aggr show -aggr n02_fp1

Aggregate: n02_fp1
Size: 7.03GB
Used Size: 180KB
Used Percentage: 0%
State: online
Nodes: netappu-02
Number Of Disks: 10

netappu-02:v5.20,
netappu-02:v5.21,
netappu-02:v5.22,
netappu-02:v5.24,
netappu-02:v5.25,
netappu-02:v5.26,
netappu-02:v5.27,
netappu-02:v5.28,
netappu-02:v5.29
Plexes: /n02_fp1/plex0(online)
RAID Groups: /n02_fp1/plex0/rg0 (block)
RAID Type: raid_dp
Max RAID Size: 16
Inconsistent: false

Hybrid: false
HA Policy: sfo
Volume Style: flex
Is Root: false
Block Type: 64-bit
netappu::> stor disk assign -disk netappu-02:v6* -owner netappu-02
(storage disk assign)

netappu::> stor disk show -type SSD
(storage disk show)
Usable
Disk

Container

Size Shelf Bay Type


---------------- ---------- ----- --- ----------- ---------- --------- -------netappu-02:v6.16 520.5MB
02

- - spare

present -

netappu-

netappu-02:v6.17 520.5MB
02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

Usable

Container

Disk

Size Shelf Bay Type


---------------- ---------- ----- --- ----------- ---------- --------- -------netappu-02:v6.27 520.5MB
02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

Usable
Disk

Container

Size Shelf Bay Type


---------------- ---------- ----- --- ----------- ---------- --------- -------netappu-02:v6.39 520.5MB
02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-

02

- - spare

present -

netappu-


netappu::>

netappu::> stor aggr modify -aggr n02_fp1 -hybrid-enabled true
(storage aggregate modify)

netappu::>

netappu::> stor aggr add-disks -aggr n02_fp1 -diskcount 6 -disktype SSD
(storage aggregate add-disks)

netappu::> stor disk show -aggr n02_fp1
(storage disk show)
Usable
Disk

Container

Size Shelf Bay Type


---------------- ---------- ----- --- ----------- ---------- --------- -------netappu-02:v5.19
netappu-02

1020MB

- - aggregate dparity n02_fp1

netappu-02:v5.20
netappu-02

1020MB


n02_fp1

netappu-02:v5.21
netappu-02

1020MB

- - aggregate data

n02_fp1

netappu-02:v5.22
netappu-02

1020MB

- - aggregate data

n02_fp1

netappu-02:v5.24
netappu-02

1020MB

- - aggregate data

n02_fp1

netappu-02:v5.25
netappu-02

1020MB

- - aggregate data

n02_fp1

netappu-02:v5.26
netappu-02

1020MB

- - aggregate data

n02_fp1

netappu-02:v5.27
netappu-02

1020MB

- - aggregate data

n02_fp1

netappu-02:v5.28
netappu-02

1020MB

- - aggregate data

n02_fp1

netappu-02:v5.29
netappu-02

1020MB

- - aggregate data

n02_fp1

Usable
Disk

Container

Size Shelf Bay Type


---------------- ---------- ----- --- ----------- ---------- --------- -------netappu-02:v6.16 520.5MB
netappu-02

- - aggregate dparity n02_fp1

netappu-02


n02_fp1

netappu-02

- - aggregate data

n02_fp1

netappu-02

- - aggregate data

n02_fp1

netappu-02

- - aggregate data

n02_fp1

netappu-02

- - aggregate data

n02_fp1


Exe 6:
netappu::> vserver show
Admin
Vserver

Root

Type State

Name Name
Volume

Aggregate Service Mapping

----------- ------- --------- ---------- ---------- ------- ------netappu

admin -

-

-

-

-

netappu-01 node -

-

-

-

-

netappu-02 node -

-

-

-

-



Vserver Volume
Used%

Aggregate State

Type

Size Available

--------- ------------ ------------ ---------- ---- ---------- ---------- ----netappu-01
vol0

aggr0

online

RW

851.5MB 624.2MB 26%

netappu-02
vol0

aggr0_netappu_02_0
online

RW

851.5MB 612.1MB 28%


netappu::> vserver create -vserver vs1 -rootvolume vs1root -aggr
n01_aggr1 -ns-switch file -rootvolume-security-style unix
[Job 23] Job succeeded: Successful

netappu::> vserver show
Admin
Vserver

Root

Type State

Name Name
Volume

Aggregate Service Mapping

----------- ------- --------- ---------- ---------- ------- ------netappu

admin -

netappu-01 node -

-

-

-

-

-

netappu-02 node vs1

-

-

-

-

cluster running vs1root n01_aggr1 file file


netappu::> vserver show -vserver vs1

Vserver: vs1
Vserver Type: cluster
Vserver UUID: 2c33e6e9-9bb7-11e2-b3fb123478563412
Root Volume: vs1root
Name Service Switch: file
Name Mapping Switch: file
NIS Domain: Root Volume Security Style: unix
LDAP Client: Language: C
Snapshot Policy: default
Comment:

Anti-Virus On-Access Policy: default
Quota Policy: default
List of Aggregates Assigned: Limit on Maximum Number of Volumes allowed: unlimited
Vserver Admin State: running
Allowed Protocols: nfs, cifs, fcp, iscsi
Disallowed Protocols: Is Repository Vserver: false

Vserver Volume
Used%

Aggregate State

Type

Size Available

--------- ------------ ------------ ---------- ---- ---------- ---------- ----netappu-01
vol0

aggr0

online

RW

851.5MB 623.4MB 26%

netappu-02
vol0

aggr0_netappu_02_0
online

vs1

vs1root

RW

851.5MB 611.1MB 28%

n01_aggr1 online


RW

20MB 18.89MB 5%

netappu::>
netappu::> volume show -vserver vs1 -volume vs1root

Vserver Name: vs1
Volume Name: vs1root
Aggregate Name: n01_aggr1
Volume Size: 20MB
Volume Data Set ID: 1025
Volume Master Data Set ID: 2147484673
Volume State: online
Volume Type: RW
Volume Style: flex
Is Cluster-Mode Volume: true
Is Constituent Volume: false
Export Policy: default
User ID: 0
Group ID: 1
Security Style: unix
UNIX Permissions: ---rwx------

Junction Path: /
Junction Path Source: Junction Active: Junction Parent Volume: Comment:
Total User-Visible Size: 19MB
Used Size: 108KB
Used Percentage: 5%
Autosize Enabled (for flexvols only): false
Maximum Autosize (for flexvols only): 23.91MB
Autosize Increment (for flexvols only): 1020KB
Total Files (for user-visible data): 566
Files Used (for user-visible data): 96
Space Guarantee Style: volume
Space Guarantee in Effect: true
Space Reserved for Snapshots: 5%
Snapshot Reserve Used: 5%
Creation Time: Tue Apr 02 17:03:11 2013

Clone Volume: false
NVFAIL Option: off
Is File System Size Fixed: false
Extent Option: off
Reserved Space for Overwrites: 0B
Fractional Reserve: 100%
Snapshot Cloning Dependency: off
Primary Space Management Strategy: volume_grow
Read Reallocation Option: off
Naming Scheme for Automatic Snapshots: create_time
Inconsistency in the File System: false
Is Volume Quiesced (On-Disk): false
Is Volume Quiesced (In-Memory): false
Volume Contains Shared or Compressed Data: false
Space Saved by Storage Efficiency: 0B
Percentage Saved by Storage Efficiency: 0%
Space Saved by Deduplication: 0B
Percentage Saved by Deduplication: 0%
Space Shared by Deduplication: 0B

Space Saved by Compression: 0B
Percentage Space Saved by Compression: 0%
Block Type: 64-bit
Constituent Volume Role: Is Volume Moving: false
Is Volume Move in Cutover Phase: false
Flash Pool Caching Eligibility: read-write
Flash Pool Write Caching Ineligibility Reason: -

netappu::>

Aggregate
Status


RAID

--------- -------- --------- ----- ------- ------ ---------------- -----------aggr0


1 netappu-01

raid_dp,

normal
aggr0_netappu_02_0

1 netappu-02

raid_dp,

normal
n01_aggr1 2.64GB 2.62GB 1% online

1 netappu-01

raid_dp,

0 netappu-01

raid_dp,

normal
normal
n02_fp1

7.03GB 7.03GB 0% online

0 netappu-02

raid_dp,

hybrid,
normal

netappu::> volume create -vserver vs1 -volume volume1 -aggr
n01_aggr1 -junction-path /vol1

netappu::> vol show
(volume show)
Vserver Volume
Used%

Aggregate State

Type

Size Available

--------- ------------ ------------ ---------- ---- ---------- ---------- ----netappu-01

vol0

aggr0

online

RW

851.5MB 623.1MB 26%

netappu-02
vol0

aggr0_netappu_02_0
online

vs1
5%

volume1

vs1

vs1root

RW

851.5MB 610.8MB 28%

n01_aggr1 online
n01_aggr1 online

RW
RW

20MB 18.90MB
20MB 18.89MB 5%


netappu::> vol show -vserver vs1 -volume volume1
(volume show)

Vserver Name: vs1
Volume Name: volume1
Volume Size: 20MB
Volume Type: RW

Volume Style: flex
User ID: 0
Group ID: 1
UNIX Permissions: ---rwx-----Junction Path: /vol1
Junction Path Source: RW_volume
Junction Active: true
Junction Parent Volume: vs1root
Comment:
Used Size: 104KB
Used Percentage: 5%
Maximum Autosize (for flexvols only): 23.91MB
Autosize Increment (for flexvols only): 1020KB

Creation Time: Tue Apr 02 17:09:10 2013
Clone Volume: false
NVFAIL Option: off
Extent Option: off

Block Type: 64-bit

netappu::>


GM Class:>)
Good morning Henry!
What's the advantage of DS4486? Thanks
Cool, when will you share the e-book with us? Thanks
:>) Thanks
Cool:>) Can't wait to get all your files!
How much performance hit could be? Thanks
Thanks
What's the diffrence compare with FAST VP from EMC? Thanks
OK. Thanks

Thanks
from Scott Anctil to Everyone:
For Flash Pool is RAID DP still recomeded or RAID 4?
First link: http://bit.ly/NTAPCM-1
Go to the link and click on FILE->DOWNLOAD to get the complete zip
file...
Second link: http://bit.ly/NTAPCM-2
Done
from David Brown to Everyone:
done
Yes
Yes
When should I use Junctions? Thanks

OK
When should I use Infinite vol? Thanks
Thanks
Sorry, have to work on a cutomer call:<(...
Done Exe 6:>)
from Hector Martinez (privately):
Ok, great!
from Hector Martinez (privately):
Ill see you 1:15 pm
What's the diffrence between cluster ports & intercluster ports? Thanks
:>)
Yes

wHY 2 E3A?
Should be e3a & e3b?
Would you please forward that email from NAUon supported switches
to me? Thanks
:>) Thanks
Henry.Pan@providence.org
Module 7 slide 14 of the clustered ONTAP 8.1.1 materials lists Cisco
Nexus switch 5548 is listed as support technology. It has been
confirmed that this is NOT the case. Also, the Cisco Nexus 5010 and
5020 were end-of-life on Dec 31, 2012 (but still supported), the current
configurations are as follows:
2-8 nodes use NetApp CN1610
8-24 nodes use Cisco Nexus 5596

Will support Juniper in the end of 2013

Exe 7:
netappu::> network port show
Auto-Negot Duplex
Node Port Role
Admin/Oper

Speed (Mbps)

Link MTU Admin/Oper Admin/Oper

------ ------ ------------ ---- ----- ----------- ---------- -----------netappu-01
e0a cluster

up 1500 true/true full/full auto/1000

e0b cluster


e0c data


e0d data


e0e data


e0f node-mgmt up 1500 true/true full/full auto/1000
netappu-02
e0a cluster


e0b cluster


e0c data


e0d data


e0e data




netappu::>

Exe 8:
netappu::> net int create -vserver vs1 -lif data1 -role data -home-node
netappu-01 -home-port a0a -address 192.168.66.131 -netmask
255.255.255.0
(network interface create)

Info: Your interface was created successfully; the routing group
d192.168.66.0/24 was created
netappu::> net int show
Logical Status
Vserver
Home

Network

Current


Current Is
Node

Port

----------- ---------- ---------- ------------------ ------------- ------- ---netappu
true

netappu-01
clus1

up/up 169.254.144.226/16 netappu-01 e0a

true

clus2

up/up 169.254.124.226/16 netappu-01 e0b

true

mgmt1

up/up 192.168.66.121/24 netappu-01 e0f

true

netappu-02
clus1

up/up 169.254.89.72/16 netappu-02 e0a

clus2

up/up 169.254.244.76/16 netappu-02 e0b

mgmt1

up/up 192.168.66.122/24 netappu-02 e0f

true
true
true

vs1
data1

up/up 192.168.66.131/24 netappu-01 a0a

netappu::> net int show -vserver vs1 -lif data1

Vserver Name: vs1
Logical Interface Name: data1
Role: data
Data Protocol: nfs, cifs, fcache
Home Node: netappu-01
Home Port: a0a

true

Current Node: netappu-01
Current Port: a0a
Operational Status: up
Extended Status: Is Home: true
Network Address: 192.168.66.131
Netmask: 255.255.255.0
IPv4 Link Local: Bits in the Netmask: 24
Routing Group Name: d192.168.66.0/24
Administrative Status: up
Failover Policy: nextavail
Firewall Policy: data
Auto Revert: false
Use Failover Group: system-defined
Fully Qualified DNS Zone Name: none
Failover Group Name:
FCP WWPN: Comment:

netappu::> network routing-groups show
Routing
Vserver Group

Subnet

Role

Metric

--------- --------- --------------- ------------ ------netappu
c192.168.66.0/24
192.168.66.0/24 cluster-mgmt

20

netappu-01
c169.254.0.0/16
169.254.0.0/16 cluster

30

n192.168.66.0/24
192.168.66.0/24 node-mgmt

10

netappu-02
c169.254.0.0/16
169.254.0.0/16 cluster

30

n192.168.66.0/24
192.168.66.0/24 node-mgmt

10

vs1
d192.168.66.0/24
192.168.66.0/24 data

20

netappu::> network routing-groups route show
Routing
Vserver Group

Destination

Gateway

Metric

--------- --------- --------------- --------------- -----netappu
c192.168.66.0/24
0.0.0.0/0

192.168.66.2 20

netappu-01
n192.168.66.0/24
0.0.0.0/0

192.168.66.2 10

netappu-02
n192.168.66.0/24
0.0.0.0/0

192.168.66.2 10

netappu::> net int migrate -vserver vs1 -lif data1 -dest-node netappu02 -dest-port e0c
(network interface migrate)

Logical Status
Vserver
Home

Network

Current


Current Is
Node

Port

----------- ---------- ---------- ------------------ ------------- ------- ---netappu
true
netappu-01
clus1

up/up 169.254.144.226/16 netappu-01 e0a

true

clus2

up/up 169.254.124.226/16 netappu-01 e0b

true

mgmt1

up/up 192.168.66.121/24 netappu-01 e0f

true

netappu-02
clus1

up/up 169.254.89.72/16 netappu-02 e0a

clus2

up/up 169.254.244.76/16 netappu-02 e0b

mgmt1

up/up 192.168.66.122/24 netappu-02 e0f

true
true
true

vs1
data1

up/up 192.168.66.131/24 netappu-02 e0c

netappu::> net int show -vserver vs1 -lif data1

false

Vserver Name: vs1
Role: data
Home Port: a0a
Current Port: e0c
Extended Status: Is Home: false
Netmask: 255.255.255.0

Auto Revert: false
FCP WWPN: Comment:
netappu::> net int revert -vserver vs1 -lif data1
(network interface revert)
netappu::> net int modify -vserver vs1 -lif data1 -home-node netappu02 -home-port e0d
(network interface modify)
Logical Status
Vserver
Home

Network

Current


Current Is
Node

Port

----------- ---------- ---------- ------------------ ------------- ------- ---netappu
true
netappu-01

clus1

up/up 169.254.144.226/16 netappu-01 e0a

true

clus2

up/up 169.254.124.226/16 netappu-01 e0b

true

mgmt1

up/up 192.168.66.121/24 netappu-01 e0f

true

netappu-02
clus1

up/up 169.254.89.72/16 netappu-02 e0a

clus2

up/up 169.254.244.76/16 netappu-02 e0b

mgmt1

true
true

up/up 192.168.66.122/24 netappu-02 e0f

true

vs1
data1

up/up 192.168.66.131/24 netappu-01 a0a

false

netappu::> net int revert -vserver vs1 -lif data1
Logical Status
Vserver
Home

Network

Current


Current Is
Node

----------- ---------- ---------- ------------------ ------------- ------- ---netappu

Port

true
netappu-01
clus1

up/up 169.254.144.226/16 netappu-01 e0a

true

clus2

up/up 169.254.124.226/16 netappu-01 e0b

true

mgmt1

up/up 192.168.66.121/24 netappu-01 e0f

true

netappu-02
clus1

up/up 169.254.89.72/16 netappu-02 e0a

clus2

up/up 169.254.244.76/16 netappu-02 e0b

mgmt1

up/up 192.168.66.122/24 netappu-02 e0f

true
true
true

vs1
data1

up/up 192.168.66.131/24 netappu-02 e0d

netappu::> net int show -vserver vs1 -lif data1 -instance

Vserver Name: vs1
Role: data

true

Home Port: e0d
Current Port: e0d
Extended Status: Is Home: true
Netmask: 255.255.255.0
Auto Revert: false
FCP WWPN: -

Comment:
netappu::> net int failover show
(network interface failover show)
Logical

Home

Vserver Interface

Failover

Node:Port

Failover

Group Usage

Group

-------- --------------- --------------------- --------------- --------------netappu
cluster_mgmt netappu-01:e0c

enabled

clusterwide

Failover Targets: netappu-01:e0c, netappu-01:a0a,
netappu-02:e0c, netappu-02:e0d,
netappu-02:e0e
netappu-01
clus1

netappu-01:e0a

system-defined

clus2

netappu-01:e0b

system-defined

mgmt1

netappu-01:e0f

disabled

Failover Targets: netappu-01:e0f
netappu-02
clus1

netappu-02:e0a

system-defined

clus2

netappu-02:e0b

system-defined

mgmt1

netappu-02:e0f

disabled

Failover Targets: netappu-02:e0f
vs1
data1

netappu-02:e0d

system-defined

Failover Targets: netappu-02:e0d, netappu-02:e0e,
netappu-02:e0c, netappu-01:a0a,
netappu-01:e0c

netappu::> system node reboot -node netappu-02

Warning: Are you sure you want to reboot the node? {y|n}: y
login: admin
Password:
Waiting for PIDS: 731
netappu::> .
Waiting for PIDS: 708.
Terminated
.
System rebooting...

Hit [Enter] to boot immediately, or any other key for command prompt.
Booting...
x86_64/freebsd/image1/kernel data=0x80f178+0x138350
syms=[0x8+0x3b9a0+0x8+0x27619]
x86_64/freebsd/image1/platform.ko size 0x237fe8 at 0xaab000
NetApp Data ONTAP 8.1.2 Cluster-Mode
Copyright (C) 1992-2012 NetApp.
All rights reserved.
md1.uzip: 26368 x 16384 blocks
md2.uzip: 3584 x 16384 blocks
*******************************
*

*

* Press Ctrl-C for Boot Menu. *
*

*

Generating host.conf.
Apr 02 19:44:53 [netappu-02:nv.fake:CRITICAL]: 32 MB system memory
being used to simulate NVRAM.
Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0f: Link up.
Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0e: Link up.
Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0d: Link up.

Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0c: Link up.
Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0b: Link up.
Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0a: Link up.
Apr 02 19:45:00 [netappu-02:diskown.isEnabled:info]: software
ownership has been enabled for this system
Apr 02 19:45:00 [netappu-02:dcs.framework.enabled:info]: The DCS
framework is enabled on this node.
route add: bad address: gw 127.0.20.1 equal to destination 127.0.2Apr
02 19:45:00 [netappu-02:kern.cli.cmd:debug]: Command line input: the
command is 'ifconfig'. The full command line is 'ifconfig lo 127.0.0.1'.
Apr 02 19:45:00 [netappu-02:kern.cli.cmd:debug]: Command line input:
the command is 'ifconfig_priv'. The full command line is 'ifconfig_priv
losk 127.0.20.1'.
the command is 'route_priv'. The full command line is 'route_priv add
host 127.0.20.1 127.0.20.1 0'.
the command is 'ifconfig_priv'. The full command line is 'ifconfig_priv lo
0'.
the command is 'ifconfig_priv'. The full command line is 'ifconfig_priv lo
127.0.0.1'.

the command is 'route_priv'. The full command line is 'route_priv add
host 127.0.10.1 127.0.20.1 0'.
0.1.
add host 127.0.10.1: gateway 127.0.20.1
WAFL CPLEDGER is enabled. Checklist = 0x7ff841ff
Apr 02 19:45:01 [netappu-02:wafl.memory.status:info]: 418MB of
memory is currently available for the WAFL file system.
Apr 02 19:45:09 [netappu-02:fmmb.current.lock.disk:info]: Disk v5.16 is
a local HA mailbox disk.
Apr 02 19:45:09 [netappu-02:fmmb.current.lock.disk:info]: Disk v5.17 is
a local HA mailbox disk.
Apr 02 19:45:09 [netappu-02:fmmb.instStat.change:info]: normal
mailbox instance on local side.
Apr 02 19:45:10 [netappu-02:coredump.host.spare.none:info]: No
sparecore disk was found for host 0.
Apr 02 19:45:10 [netappu-02:raid.cksum.replay.summary:info]:
Replayed 0 checksum blocks.
Apr 02 19:45:10 [netappu-02:raid.stripe.replay.summary:info]:
Replayed 0 stripes.
Apr 02 19:45:12 [netappu-02:wafl.aggr.btiddb.build:info]: Buftreeid
database for aggregate 'n02_fp1' UUID 'daa17509-9ba7-11e2-b3fb123478563412' was built in 0 msec, after scanning 0 inodes and
restarting -1 times with a final result of starting.

database for aggregate 'n02_fp1' UUID 'daa17509-9ba7-11e2-b3fb123478563412' was built in 0 msec, after scanning 2 inodes and
restarting 0 times with a final result of success.
database for aggregate 'aggr0_netappu_02_0' UUID 'bc41b09e-7d7711e2-a2c1-123478563412' was built in 0 msec, after scanning 0 inodes
and restarting -1 times with a final result of starting.
database for aggregate 'aggr0_netappu_02_0' UUID 'bc41b09e-7d7711e2-a2c1-123478563412' was built in 125 msec, after scanning 12
inodes and restarting 4 times with a final result of success.
Apr 02 19:45:22 [netappu-02:kern.syslog.msg:notice]: The system was
down for 107 seconds
Apr 02 19:45:22 [netappu-02:tar.csum.match:info]: Stored checksum
matches, not extracting local://tmp/prestage/mroot.tgz.
Apr 02 19:45:22 [netappu-02:tar.csum.match:info]: Stored checksum
matches, not extracting local://tmp/prestage/pmroot.tgz.
Apr 02 19:45:25 [netappu-02:dfu.firmwareUpToDate:info]: Firmware is
up-to-date on all disk drives
netappu-02
the command is 'routed'. The full command line is 'routed off'.

the command is 'options'. The full command line is 'options dns.enable
off'.
the command is 'options'. The full command line is 'options nis.enable
off'.
Apr 02 19:45:25 [netappu-02:snmp.agent.msg.access.denied:warning]:
Permission denied for SNMPv3 requests from root. Reason: Password is
too short (SNMPv3 requires at least 8 characters).
Apr 02 19:45:26 [netappu-02:mgr.opsmgr.autoreg.norec:warning]: No
SRV records found for the System Manager server, or the server is not
located on this subnet.
Apr 02 19:45:26 [netappu-02:perf.archive.start:info]: Performance
archiver started. Sampling 21 objects and 339 counters.
Apr 02 19:45:26 [netappu-02:mgr.boot.disk_done:info]: NetApp
Release 8.1.2 Cluster-Mode boot complete. Last disk update written at
Tue Apr 2 19:43:27 GMT 2013

Apr 02 19:45:26 [netappu-02:cf.fm.missingAdapter:error]: Warning: cf
is licensed yet an interconnect adapter was not found
Apr 02 19:45:26 [netappu-02:mgr.boot.reason_ok:notice]: System
rebooted after a reboot command.
Apr 02 19:45:26 [netappu-02:callhome.reboot.reboot:info]: Call home
for REBOOT (reboot command)

Can't set cifs branchcache server secret.
Apr 02 19:45:26 [netappu-02:httpd.config.mime.missing:warning]:
/etc/httpd.mimetypes.sample file is missing.
Apr 02 19:45:26 [netappu-02:lmgr.reclaim.locks:debug]: lock reclaims
on volume: 'aggr0_netappu_02_0' iniatiated by : 'boot_grace_start'.
Apr 02 19:45:26 [netappu-02:lmgr.reclaim.locks:debug]: lock reclaims
on volume: 'n02_fp1' iniatiated by : 'boot_grace_start'.
Apr 02 19:45:26 [netappu-02:ha.local.dbladeId:debug]: D-blade ID of
the local node is dc8ab514-7d75-11e2-815e-15b4677aa19d.
Apr 02 19:45:26 [netappu-02:wafl.scan.start:info]: Starting HyA Hit
Update on aggregate n02_fp1.
Apr 02 19:45:26 [netappu-02:clam.enable:info]: CLAM functionality is
enabled.
Apr 02 19:45:26 [netappu-02:unowned.disk.reminder:info]: 14 disks are
currently unowned. Use 'disk assign' to assign the disks to a filer.
Ipspace "acp-ipspace" created
rpc failed: RPC: Timed out
mroot is now available
mroot is now available

Tue Apr 2 19:47:14 UTC 2013
login:

netappu::> net int revert -vserver vs1 -lif data*

Logical Status
Vserver
Home

Network

Current


Current Is
Node

Port

----------- ---------- ---------- ------------------ ------------- ------- ---netappu
true
netappu-01
clus1

up/up 169.254.144.226/16 netappu-01 e0a

true

clus2

up/up 169.254.124.226/16 netappu-01 e0b

true

mgmt1

up/up 192.168.66.121/24 netappu-01 e0f

true

netappu-02
clus1

up/up 169.254.89.72/16 netappu-02 e0a

clus2

up/up 169.254.244.76/16 netappu-02 e0b

mgmt1

up/up 192.168.66.122/24 netappu-02 e0f

true
true
true

vs1
data1

up/up 192.168.66.131/24 netappu-02 e0d

netappu::> network port show
Auto-Negot Duplex
Node Port Role
Admin/Oper

Speed (Mbps)

Link MTU Admin/Oper Admin/Oper

------ ------ ------------ ---- ----- ----------- ---------- -----------netappu-01
a0a data

up 1500 true/-

auto/full auto/1000

a0a-11 data

up 1500 true/false auto/full auto/1000

a0a-22 data


a0a-33 data


e0a cluster


e0b cluster


e0c data


e0d data


e0e data


netappu-02

true

e0a cluster


e0b cluster


e0c data


e0d data


e0e data


netappu::> net port vlan show
(network port vlan show)
Network Network
Node VLAN Name Port VLAN ID MAC Address
------ --------- ------- -------- ----------------netappu-01
a0a-11 a0a

11

02:50:56:ad:1a:bb

a0a-22 a0a

22

02:50:56:ad:1a:bb

a0a-33 a0a

33

02:50:56:ad:1a:bb

netappu::> net port vlan delete -node netappu-01 -vlan-name a0a-11
(network port vlan delete)


netappu::> set advanced

Warning: These advanced commands are potentially dangerous; use
them only when
directed to do so by NetApp personnel.

netappu::*> net port modify -node netappu-01 -port a0a -up-admin
false
(network port modify)

netappu::*> set admin
netappu::> net port ifgrp delete -node netappu-01 -ifgrp a0a
(network port ifgrp delete)

netappu::>

First link: http://bit.ly/NTAPCM-1

Go to the link and click on FILE->DOWNLOAD to get the complete zip
file...
Second link: http://bit.ly/NTAPCM-2

Day 3
netappu::> vserver services ldap

netappu::vserver services ldap> ?
client>

Manage LDAP client configurations

create

Create an LDAP configuration

delete

Delete an LDAP configuration

modify

Modify an LDAP configuration

show

Display LDAP configurations

netappu::vserver services ldap>
netappu::vserver services ldap> vserver services ldap show
This table is currently empty.

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:UsersAdministrator>net view ntapvs2
Shared resources at ntapvs2

?

Share name Type Used as Comment

------------------------------------------------------------------------------rootdir
vol1

Disk
Disk

The command completed successfully.

C:UsersAdministrator>



?

Share name Type Used as Comment

------------------------------------------------------------------------------rootdir
vol1

Disk
Disk


C:UsersAdministrator>net use * ntapvs2vol1
Drive Z: is now connected to ntapvs2vol1.


C:UsersAdministrator>net use * ntapvs2rootdir
Drive Y: is now connected to ntapvs2rootdir.


C:UsersAdministrator>dir z:
Volume in drive Z has no label.
Volume Serial Number is 8000-0405

Directory of Z:

04/03/2013 08:06 AM <DIR>

.

04/03/2013 08:06 AM <DIR>

..

0 File(s)
2 Dir(s)

0 bytes
398,331,904 bytes free

C:UsersAdministrator>dir y:
Volume in drive Y has no label.

Directory of Y:

04/03/2013 08:09 AM <DIR>

.

04/03/2013 08:09 AM <DIR>

..

04/03/2013 08:06 AM <DIR>

vs2vol1

0 File(s)

0 bytes

3 Dir(s)


C:UsersAdministrator>

netappu::> cifs share access-control show -vserver vs2
Share
Vserver

User/Group

Name

Name

Access
Permission

-------------- ----------- --------------------------- ----------vs2

rootdir

vs2

Everyone

vol1

Everyone

Full_Control
Full_Control


netappu::> cifs share access-control modify -vserver vs2 -share vol1 user-or-group Everyone Read

netappu::> cifs share access-control show -vserver vs2
Share
Vserver

User/Group

Name

Name

Access
Permission

-------------- ----------- --------------------------- -----------

vs2

rootdir

vs2

vol1

Everyone
Everyone

Full_Control
Read


netappu::> cifs share access-control modify -vserver vs2 -share vol1 user-or-group Everyone Full_Control

netappu::> cifs home-directory search-path add -vserver vs2 -path
/vs2vol1

netappu::> cifs home-directory search-path show
Vserver

Position Path

----------- -------- ----------------vs2

1

/vs2vol1

netappu::> cifs share create -vserver vs2 -share-name "~%w" -path
"%w" -share-properties oplocks,browsable,changenotify,homedirectory
netappu::> cifs share show -vserver vs2
Vserver

Share

Path

Properties Comment ACL

-------------- ------------- ----------------- ---------- -------- ----------vs2

admin$

vs2

ipc$

/
/

browsable browsable -

-

vs2

rootdir

/

oplocks -

Everyone / Full Control

browsable
changenotify
vs2

vol1

/vs2vol1

oplocks -


browsable
changenotify
vs2

~%w

%w

oplocks -


browsable
changenotify
homedirectory



?

0 File(s)
3 Dir(s)

0 bytes

C:UsersAdministrator>net use
New connections will not be remembered.

Status

Local

Remote

Network

------------------------------------------------------------------------------Y:

ntapvs2rootdir

Z:

ntapvs2vol1

Microsoft Windows Network
Microsoft Windows Network


C:UsersAdministrator>z:

Z:>dir

Directory of Z:

04/03/2013 08:06 AM <DIR>

.

04/03/2013 08:06 AM <DIR>

..

0 File(s)
2 Dir(s)

0 bytes

Z:>md administrator

Z:>dir

Directory of Z:

04/03/2013 08:33 AM <DIR>

.

04/03/2013 08:33 AM <DIR>

..

04/03/2013 08:33 AM <DIR>

administrator

0 File(s)

0 bytes

3 Dir(s)


Z:>dir administrator

Directory of Z:administrator

04/03/2013 08:33 AM <DIR>

.

04/03/2013 08:33 AM <DIR>

..

0 File(s)
2 Dir(s)

0 bytes

Z:>net view ntapvs2

?

Share name

Type Used as Comment

------------------------------------------------------------------------------rootdir
vol1

Disk
Disk

~Administrator Disk

Z:>net use * ntapvs2~administrator
Drive X: is now connected to ntapvs2~administrator.


Z:>x:

X:>dir
Volume in drive X has no label.

Directory of X:

04/03/2013 08:33 AM <DIR>

.

04/03/2013 08:33 AM <DIR>

..

0 File(s)
2 Dir(s)

0 bytes

X:>

netappu::> vserver export-policy rule show -vserver vs2
Policy
Vserver

Rule Access Client

Name

RO

Index Protocol Match

Rule

------------ --------------- ------ -------- --------------------- --------vs2

default

1

any

0.0.0.0/0

any

PuTTY to Linux01
login as: root
root@linux01's password:
Last login: Thu Mar 29 12:47:22 2012 from 192.168.1.139
[root@linux01 ~]# mkdir /mnt/vs2

[root@linux01 ~]# mkdir /mnt/path01
[root@linux01 ~]# mount -t nfs 192.168.66.132:/ /mnt/vs2
[root@linux01 ~]# mount -t nfs 192.168.66.132:/vs2vol1 /mnt/path01
[root@linux01 ~]# cd /mnt/vs2/vs2vol1/administrator/
[root@linux01 administrator]# ls
[root@linux01 administrator]#

[admin@linux01 ~]$ cd /mnt/path01
[admin@linux01 path01]$ cp /usr/include/* .
cp: omitting directory `/usr/include/ao'
cp: omitting directory `/usr/include/python2.6'
[admin@linux01 path01]$ ls
administrator netapi.h
[admin@linux01 path01]$

netappu::> vol show -volume vs2_vol01 -fields used
(volume show)
vserver volume used
------- --------- ----vs2

vs2_vol01 212KB

[admin@linux01 path01]$ cd /mnt/vs2/path01
-bash: cd: /mnt/vs2/path01: No such file or directory
[admin@linux01 path01]$

How to create and understand vserver name-mapping rules in Data ONTAP Cluster-Mode

KB ID: 1013831 Version: 1.0 Published date: 05/17/2012
Categories: Administration, Data ONTAP 8.0 Cluster-Mode, Data ONTAP 8.0.x Cluster-Mode, Data ONTAP 8.1 Cluster-Mode, Data ONTAP GX

Description
Data ONTAP Cluster-Mode can be accessed by Common Internet File System protocol (CIFS) and Network File System (NFS).
Name-mapping is used to map CIFS users to UNIX users and vice versa.
In the CIFS world, for example, it is known as NETAPPjdoe, but in NFS (NIS) it is just jdoe. Name-mappings are rules (actually, regular expressions), which are interpreted by the authentication system during login to resolve your
identity and gather the credentials you need to access your files. Name-mapping is the first step in the process of ensuring that the person logging in can get to their files, regardless of which protocol they use to access the file server.
Note the similarity of the CIFS and NIS usernames; many organizations that buy NetApp products use a naming convention such as this. If they do, they can use a very simple regular expression that just strips off the CIFS domain
name, and the delimiting to leave just the username. In other cases, where the correspondence between user names is not direct, they may need to enter a mapping for each and every user. The name mapping rule syntax has extra
features that can be used to adjust the case of user names, in case that is an issue.
Name mapping rules use regular expressions to match the source user name, and substitute the matched expression for the destination. The source and destination are specified as the mapping direction: Either Windows - UNIX, UNIX
- Windows, or Kerb - UNIX. (Kerberos mappings are only necessary if using a Kerberized NFS UNIX client. Most UNIX clients are NOT Kerberized).

Procedure
Some general guidelines:

Rules are vserver specific. Each vserver can have its own independent set of name mapping rules.

Rules are evaluated in order starting with rules in the first position. The first rule to match the source name

wins, and processing stops at that point.

If no rule matches before reaching the end of the list, then a default name will be used. The default name is protocol specific (both CIFS and NFS each have their own default) and it is specified during the setup of the protocol.

To specify the default UNIX user for CIFS, see the

vserver cifs options modify command and specify the -default-unix-user field.

To specify the default Windows user for NFS, see the

vserver nfs modify command and specify the -default-win-user field.

characters must be escaped when entering the rule; escape them with another "". Windows uses "" as a delimiter between Domain and Username. So, for example, if you wish to match a single backslash in the source name, put
in two backslashes as follows:

DOMAINNAME* -> 1
Use _ to force the matched destination name into lowercase.

Use ^ to force the matched destination name into uppercase.
Use & to force the matched destination name into initial case (the first character is capitalized, and all remaining characters are lower cased; for example, bob -> Bob).
Examples:

Mapping direction: Windows - UNIX

DOMAINNAME(.+)

-> 1

DOMAINNAME plus, at least 1 character, up to any number of characters. The
DOMAINNAME must occur as part of the name. The . represents any single character, and the + says, any number of characters may follow. Note that this rule is better than the similar

This rule is by far, the most common rule you'll see in production. This matches a user whose Login ID consists of the literal characters
literal text

rule

DOMAINNAME(*) because it requires at least 1 character to match. The * would match any user name, but would also match a user name without a single character, resulting in a 0 length target name
DOMAINNAME, for example.

if a user typed in


DOMAINNAME(.)(.+) -> _12
This rule shows an example using multiple arguments. The first (.) will match any single character, and the translation rule on the UNIX side will cause the matched character to become lowercase. The second (.+) will match one or
more characters, and the translation rule will cause it to be appended immediately after the first argument, without modification (i.e., no uppercasing or lowercasing). Note that this rule matches only usernames at least 2 characters in
length.


(.+)(.+)

-> 2

This rule matches any Windows Domain Name, drops the domain and uses only the second matched parameter. This rule can be a little weird because it may result in multiple users being mapped to the same UNIX user. For
example:

DOMAINNAMEroot -> root
DOMAINNAME2root -> root
In this case, the user root from DOMAINNAME will be mapped to UNIX user root. If someone from DOMAINNAME2 connects with username root, they will also translate to user root.

Exe 10
Yahoo is the biggest NA user


C:UsersAdministrator>cd "C:Program FilesNetAppWindows Host
Utities"
The system cannot find the path specified.

C:UsersAdministrator>cd ..

C:Users>cd ..

C:>dir
Volume in drive C has no label.
Volume Serial Number is C87A-766E

Directory of C:

09/12/2012 10:03 AM <DIR>

inetpub

09/10/2012 10:09 PM <DIR>

NETAPP

07/13/2009 08:20 PM <DIR>

PerfLogs

04/01/2013 02:50 PM <DIR>

Program Files

11/27/2012 04:34 AM <DIR>

Program Files (x86)

04/03/2013 12:39 PM <DIR>

temp

09/12/2012 08:01 AM <DIR>

Users

11/28/2012 05:40 AM <DIR>

Windows

12/01/2012 12:12 PM <DIR>

_Files

0 File(s)

0 bytes

9 Dir(s) 14,900,826,112 bytes free

C:>cd "Program Files"

C:Program Files>dir

Directory of C:Program Files

04/01/2013 02:50 PM <DIR>

.

04/01/2013 02:50 PM <DIR>

..

09/07/2012 11:05 PM <DIR>

Common Files

11/28/2012 05:40 AM <DIR>

Hyper-V

11/20/2010 08:33 PM <DIR>

Internet Explorer

03/20/2013 06:47 PM <DIR>

Java

09/07/2012 04:22 PM <DIR>

MSBuild

04/03/2013 12:39 PM <DIR>

NetApp

11/28/2012 05:40 AM <DIR>

Packaged Programs

09/13/2012 08:34 AM <DIR>

ppedv

09/07/2012 04:22 PM <DIR>

Reference Assemblies

09/07/2012 11:05 PM <DIR>

VMware

09/13/2012 08:52 AM <DIR>

Windows Live

11/20/2010 08:33 PM <DIR>

Windows Mail

07/13/2009 10:37 PM <DIR>

Windows NT

0 File(s)

0 bytes

15 Dir(s) 14,900,826,112 bytes free

C:Program Files>cd Net*

C:Program FilesNetApp>dir

Directory of C:Program FilesNetApp

04/03/2013 12:39 PM <DIR>

.

04/03/2013 12:39 PM <DIR>

..

04/01/2013 02:51 PM <DIR>

OnCommand System Manager

04/03/2013 12:39 PM <DIR>

Windows Host Utilities

0 File(s)

0 bytes

4 Dir(s) 14,900,826,112 bytes free

C:Program FilesNetApp>cd W*

C:Program FilesNetAppWindows Host Utilities>dir

Directory of C:Program FilesNetAppWindows Host Utilities

04/03/2013 12:39 PM <DIR>

.

04/03/2013 12:39 PM <DIR>

..

10/10/2011 12:15 PM
10/10/2011 12:15 PM

67,584 LinuxGuestConfig.iso
1,679,446 mbralign.exe

04/03/2013 12:39 PM <DIR>

NetAppQCLI

04/27/2011 02:19 AM

212,207 NOTICE.PDF

10/10/2011 12:14 PM

63,488 san_version.exe

4 File(s)

2,022,725 bytes

3 Dir(s) 14,900,826,112 bytes free

C:Program FilesNetAppWindows Host Utilities>san_version
Windows(R) Host Utilities 6.0.4108.1216

NetApp version: 6.0

C:Program FilesNetAppWindows Host Utilities>

Iqn.1991-05.com.microsoft:nadc.netappu.com

Exe 11

C:UsersAdministrator>cd "C:Program FilesNetAppWindows Host
Utities"
The system cannot find the path specified.

C:UsersAdministrator>cd ..

C:Users>cd ..

C:>dir


Directory of C:

09/12/2012 10:03 AM <DIR>

inetpub

09/10/2012 10:09 PM <DIR>

NETAPP

07/13/2009 08:20 PM <DIR>

PerfLogs

04/01/2013 02:50 PM <DIR>

Program Files

11/27/2012 04:34 AM <DIR>

Program Files (x86)

04/03/2013 12:39 PM <DIR>

temp

09/12/2012 08:01 AM <DIR>

Users

11/28/2012 05:40 AM <DIR>

Windows

12/01/2012 12:12 PM <DIR>

_Files

0 File(s)

0 bytes

9 Dir(s) 14,900,826,112 bytes free

C:>cd "Program Files"

C:Program Files>dir


Directory of C:Program Files

04/01/2013 02:50 PM <DIR>

.

04/01/2013 02:50 PM <DIR>

..

09/07/2012 11:05 PM <DIR>

Common Files

11/28/2012 05:40 AM <DIR>

Hyper-V

11/20/2010 08:33 PM <DIR>

Internet Explorer

03/20/2013 06:47 PM <DIR>

Java

09/07/2012 04:22 PM <DIR>

MSBuild

04/03/2013 12:39 PM <DIR>

NetApp

11/28/2012 05:40 AM <DIR>

Packaged Programs

09/13/2012 08:34 AM <DIR>

ppedv

09/07/2012 04:22 PM <DIR>

Reference Assemblies

09/07/2012 11:05 PM <DIR>

VMware

09/13/2012 08:52 AM <DIR>

Windows Live

11/20/2010 08:33 PM <DIR>

Windows Mail

07/13/2009 10:37 PM <DIR>

Windows NT

0 File(s)

0 bytes

15 Dir(s) 14,900,826,112 bytes free

C:Program Files>cd Net*

C:Program FilesNetApp>dir

Directory of C:Program FilesNetApp

04/03/2013 12:39 PM <DIR>

.

04/03/2013 12:39 PM <DIR>

..

04/01/2013 02:51 PM <DIR>

OnCommand System Manager

04/03/2013 12:39 PM <DIR>

Windows Host Utilities

0 File(s)

0 bytes

4 Dir(s) 14,900,826,112 bytes free

C:Program FilesNetApp>cd W*

C:Program FilesNetAppWindows Host Utilities>dir


Directory of C:Program FilesNetAppWindows Host Utilities

04/03/2013 12:39 PM <DIR>

.

04/03/2013 12:39 PM <DIR>

..

10/10/2011 12:15 PM
10/10/2011 12:15 PM

67,584 LinuxGuestConfig.iso
1,679,446 mbralign.exe

04/03/2013 12:39 PM <DIR>

NetAppQCLI

04/27/2011 02:19 AM

212,207 NOTICE.PDF

10/10/2011 12:14 PM

63,488 san_version.exe

4 File(s)

2,022,725 bytes

3 Dir(s) 14,900,826,112 bytes free

C:Program FilesNetAppWindows Host Utilities>san_version
Windows(R) Host Utilities 6.0.4108.1216
NetApp version: 6.0

C:Program FilesNetAppWindows Host Utilities>ls
/mnt/vs2/dataefficiency
'ls' is not recognized as an internal or external command,
operable program or batch file.

C:Program FilesNetAppWindows Host Utilities>net use t:
ntapvs2de

C:Program FilesNetAppWindows Host Utilities>t:

T:>dir
Volume in drive T has no label.

Directory of T:

04/03/2013 02:03 PM <DIR>

.

04/03/2013 02:03 PM <DIR>

..

04/03/2013 02:03 PM
1 File(s)
2 Dir(s)

57 datafile
57 bytes


T:>

Day 4
Is there a Clustered ONTAP version
Like (0) Report Abuse Reply

michael cope Apr 4, 2013 4:27 AM (in response to adrianlowe)

Not yet. Someone else is working on that and they've decided to hold off until 8.2 comes out rather than have to re-write it. The cDOT documentation set on the Support website has a Command Map document that
compares 7-Mode commands with the equivalent cDOT commands

Exe 12
login: admin
Password:
netappu::> volume create -vserver vs2 -volume vs2_root_ls1 -aggr
n01_aggr1 -type dp

netappu::> snapmirror create -source-cluster netappu -source-vserver
vs2 -source-volume vs2_root -destination-cluster netappu -destinationvserver vs2 -destination-volume vs2_root_ls1 -type ls

[Job 61] Job succeeded: SnapMirror: done
appu://vs2/vs2_root_ls1.

netappu::> volume create -vserver vs2 -volume vs2_root_ls2 -aggr
n02_aggr1 -type dp
[Job
63] Job succeeded: Successful

netappu::> snapmirror create -source-path netappu://vs2/vs2_root destination-path netappu://vs2/vs2_root_ls2 -type ls
appu://vs2/vs2_root_ls2.

netappu::>
netappu::> snapmirror show
Source
Path

Destination Mirror
Type Path

State

Relationship Total
Status

Progress Healthy

------------- ---- ------------ ------------- -------------- ---------- ------netappu://vs2/vs2_root
LS netappu://vs2/vs2_root_ls1
Uninitialized Idle

-

-

-

-

netappu://vs2/vs2_root_ls2
Uninitialized Idle


netappu::> snapmirror show -instance

Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_ls1
Relationship Type: LS
Managing Vserver: vs2
SnapMirror Schedule: Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Uninitialized
Relationship Status: Idle
Transfer Snapshot: Snapshot Progress: Total Progress: Snapshot Checkpoint: Newest Snapshot: Newest Snapshot Timestamp: Exported Snapshot: -

Exported Snapshot Timestamp: Healthy: Constituent Relationship: false

Transfer Snapshot: Snapshot Progress: Total Progress: Snapshot Checkpoint: Newest Snapshot: Newest Snapshot Timestamp: Exported Snapshot: -

Exported Snapshot Timestamp: Healthy: Constituent Relationship: false


netappu::>
netappu::> snapmirror initialize-ls-set -source-path
netappu://vs2/vs2_root
[Job 65] Job is queued: snapmirror initialize-ls-set for source
netappu://vs2/vs2_root.

Source
Path

Destination Mirror
Type Path

State

Relationship Total
Status

Progress Healthy

Uninitialized Transferring 68KB

-

Uninitialized Transferring 68KB

-


netappu::>

netappu::> vol create -vserver vs2 -vol vs2_root_dp1 -aggr n01_aggr1 type dp
(volume create)

netappu::> vol create -vserver vs2 -vol vs2_root_dp2 -aggr n02_aggr1 type dp
(volume create)

netappu::> snapmirror create -source-path netappu://vs2/vs2_root destination-path netappu://vs2/vs2_root_dp1 -type dp
appu://vs2/vs2_root_dp1.

netappu::> snapmirror create -source-path netappu://vs2/vs2_root destination-path netappu://vs2/vs2_root_dp2 -type dp
appu://vs2/vs2_root_dp2.

Source
Path

Destination Mirror
Type Path

State

Relationship Total
Status

Progress Healthy

DP netappu://vs2/vs2_root_dp1
Uninitialized Idle

-

-

-

-

netappu://vs2/vs2_root_dp2
Uninitialized Idle
Snapmirrored Idle

-

true

-

true

Snapmirrored Idle

netappu::> snapmirror initialize -source-path netappu://vs2/vs2_root destination-path netappu://vs2/vs2_root_dp1
[Job 72] Job is queued: snapmirror initialize of destination
netappu://vs2/vs2_root_dp1.

netappu::>
netappu::> vol snapshot show -vserver vs2 -vol vs2_root
(volume snapshot show)
---Blocks--Vserver Volume Snapshot

State

Size Total% Used%

-------- ------- ------------------------------- -------- -------- ------ ----vs2

vs2_root
daily.2013-04-04_0010

valid

68KB

0% 35%

hourly.2013-04-04_1005

valid

68KB

0% 35%

hourly.2013-04-04_1105

valid

68KB

0% 35%

hourly.2013-04-04_1205

valid

68KB

0% 35%

hourly.2013-04-04_1305

valid

68KB

0% 35%

hourly.2013-04-04_1405

valid

68KB

0% 35%

hourly.2013-04-04_1505

valid

68KB

0% 35%

snapmirror.b290138c-9aee-11e2-bbf1123478563412_4_2147484676.2013-04-04_154441

valid

60KB

0% 33%

valid

48KB

0% 28%


netappu::>
netappu::> snapmirror show -inst

Destination Path: netappu://vs2/vs2_root_dp1
Relationship Type: DP
Mirror State: Snapmirrored
Transfer Snapshot: Snapshot Progress: -

Total Progress: Snapshot Checkpoint: Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1123478563412_4_2147484684.2013-04-04_155443
Newest Snapshot Timestamp: 04/04 15:54:43
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1123478563412_4_2147484684.2013-04-04_155443
Exported Snapshot Timestamp: 04/04 15:54:43
Healthy: true
Constituent Relationship: false


Transfer Snapshot: Snapshot Progress: Total Progress: Snapshot Checkpoint: Newest Snapshot: Newest Snapshot Timestamp: Exported Snapshot: Exported Snapshot Timestamp: Healthy: Constituent Relationship: false


Transfer Snapshot: Snapshot Progress: Total Progress: Snapshot Checkpoint: Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1123478563412_4_2147484676.2013-04-04_154441
Healthy: true

SnapMirror Schedule: -

Tries Limit: 8
Healthy: true


netappu::>

netappu::> snapmirror initialize -source-path netappu://vs2/vs2_root destination-path netappu://vs2/vs2_root_dp2 -foreground true
mirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484685.201304-04_155826.

Transfer Snapshot: Snapshot Progress: Total Progress: Snapshot Checkpoint: -

Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1123478563412_4_2147484684.2013-04-04_155443
Healthy: true

Transfer Snapshot: -

Snapshot Progress: Total Progress: Snapshot Checkpoint: Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1123478563412_4_2147484685.2013-04-04_155826
Healthy: true


Healthy: true


netappu::>

State

Size Total% Used%

-------- ------- ------------------------------- -------- -------- ------ ----vs2

vs2_root
daily.2013-04-04_0010

valid

68KB

0% 36%

hourly.2013-04-04_1005

valid

68KB

0% 36%

hourly.2013-04-04_1105

valid

68KB

0% 36%

hourly.2013-04-04_1205

valid

68KB

0% 36%

hourly.2013-04-04_1305

valid

68KB

0% 36%

hourly.2013-04-04_1405

valid

68KB

0% 36%

hourly.2013-04-04_1505

valid

68KB

0% 36%

valid

60KB

0% 33%

valid

60KB

0% 33%

valid

56KB

0% 32%

netappu::> snapmirror update -source-path netappu://vs2/vs2_root destination-path netappu://vs2/vs2_root_dp* -foreground true
ror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484684.2013-0404_160147.
2 entries were acted on.



_dp2.

Healthy: true


Healthy: true


netappu::>

State

Size Total% Used%

-------- ------- ------------------------------- -------- -------- ------ ----vs2

vs2_root
daily.2013-04-04_0010

valid

68KB

0% 35%

hourly.2013-04-04_1005

valid

68KB

0% 35%

hourly.2013-04-04_1105

valid

68KB

0% 35%

hourly.2013-04-04_1205

valid

68KB

0% 35%

hourly.2013-04-04_1305

valid

68KB

0% 35%

hourly.2013-04-04_1405

valid

68KB

0% 35%

hourly.2013-04-04_1505

valid

68KB

0% 35%

valid

60KB

0% 33%

valid

68KB

0% 35%

valid

72KB

0% 37%


netappu::>

Task 3
netappu::> vol create -vserver vs2 -vol vs2_vol03 -aggr n01_aggr1 junction-path /vs2vol3
(volume create)

Notice: Volume vs2_vol03 now has a mount point from volume
vs2_root. The load

sharing (LS) mirrors of volume vs2_root have no replication
schedule.
Volume vs2_vol03 will not be visible in the global namespace until
the
LS mirrors of volume vs2_root have been updated.

login as: root
root@linux01's password:
Last login: Wed Apr 3 14:04:00 2013 from nadc.netappu.com
[root@linux01 ~]# cd /mnt/vs2
[root@linux01 vs2]# ls
dataefficiency vs2vol1
[root@linux01 vs2]#

netappu::> snapmirror update-ls-set -source-path
[Job 77] Job is queued: snapmirror update-ls-set for source

[root@linux01 vs2]# ls /mnt/vs2
dataefficiency vs2vol1 vs2vol3

[root@linux01 vs2]#

[root@linux01 vs2]# touch /mnt/vs2/myfile
touch: cannot touch `/mnt/vs2/myfile': Read-only file system
[root@linux01 vs2]#
[root@linux01 vs2]# mkdir /mnt/vs2rw
[root@linux01 vs2]# mount 192.168.66.132:/.admin /mnt/vs2rw
[root@linux01 vs2]# touch /mnt/vs2/myfile
touch: cannot touch `/mnt/vs2/myfile': Read-only file system
[root@linux01 vs2]# ls /mnt/vs2rw/myfile
ls: cannot access /mnt/vs2rw/myfile: No such file or directory
[root@linux01 vs2]# mount 192.168.66.132:/ .admin /mnt/vs2rw
Usage: mount -V
mount -h

: print version
: print this help

mount

: list mounted filesystems

mount -l

: idem, including volume labels

So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.

mount -a [-t|-O] ...

: mount all stuff from /etc/fstab

mount device

: mount device at the known place

mount directory

: mount known device here

mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
One can change the type of mount containing the directory dir:
mount --make-shared dir
mount --make-slave dir
mount --make-private dir
mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
mount --make-rshared dir
mount --make-rslave dir
mount --make-rprivate dir

mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
[root@linux01 vs2]#

[root@linux01 vs2]# ls /mnt/vs2/myfile
ls: cannot access /mnt/vs2/myfile: No such file or directory
[root@linux01 vs2]#

[Job 77] Job is queued: snapmirror update-ls-set for source

netappu://vs2/vs2_root -foreground true
irror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.201304-04_161534.

[root@linux01 vs2]# ls /mnt/vs2/myfile
ls: cannot access /mnt/vs2/myfile: No such file or directory
[root@linux01 vs2]#

Task 4
netappu::> job schedule show
Name

Type

Description

----------- --------- ----------------------------------------------------5min

cron

@:00,:05,:10,:15,:20,:25,:30,:35,:40,:45,:50,:55

8hour

cron

@2:15,10:15,18:15

RepositoryBalanceMonitorJobSchedule
interval Every 10m
avUpdateSchedule
cron
daily

@2:00

cron

@0:10

hourly

cron

@:05

weekly

cron

Sun@0:15

netappu::> snapmirror modify -destination-path
netappu://vs2/vs2_root_ls1 -schedule 5min

[Job 79] Job is queued: snapmirror modify the relationship with
destination netappu://vs2/vs2_root_ls1.
netappu::> snapmirror show -destination-path
netappu://vs2/vs2_root_ls* -instance

SnapMirror Schedule: 5min
Tries Limit: 8
Relationship Status: Transferring

Healthy: true

Tries Limit: 8
Transfer Snapshot: Snapshot Progress: Total Progress: Snapshot Checkpoint: -

Healthy: false


netappu::>
netappu::> snapmirror modify -destination-path
netappu://vs2/vs2_root_dp1 -schedule hourly
[Job 80] Job is queued: snapmirror modify the relationship with
destination netappu://vs2/vs2_root_dp1.
netappu::> snapmirror show -instance


SnapMirror Schedule: hourly
Tries Limit: 8
Healthy: true

Healthy: true


Tries Limit: 8

Healthy: true


netappu::>
netappu::> system date show
Node

Date

Timezone

--------- ------------------- ------------------------netappu-01
4/4/2013 16:22:54 Etc/UTC
netappu-02
4/4/2013 16:28:21 Etc/UTC

Task 5
netappu::> vol show -vol vs2_root*
(volume show)
Error: Ambiguous argument. Possible matches include:
-volume
-volume-style

netappu::> vol show -volume vs2_root*
(volume show)
Vserver Volume
Used%

Aggregate State

Type

Size Available

--------- ------------ ------------ ---------- ---- ---------- ---------- ----vs2

vs2_root

n02_aggr1 online

RW

20MB 18.88MB 5%

vs2
5%

vs2_root_dp1 n01_aggr1 online

DP

20MB 18.88MB

vs2
5%


DP

20MB 18.88MB

vs2
5%

vs2_root_ls1 n01_aggr1 online

LS

20MB 18.88MB

vs2
5%


LS

20MB 18.88MB

netappu::> snapmirror promote -source-path netappu://vs2/vs2_root destination-path netappu://vs2/vs2_root_ls1

Warning: Promote will delete the read-write volume
netappu://vs2/vs2_root and
replace it with netappu://vs2/vs2_root_ls1.

t_ls1.

netappu::> vol show -volume vs2_root*
(volume show)
Vserver Volume
Used%

Aggregate State

Type

Size Available

--------- ------------ ------------ ---------- ---- ---------- ---------- ----vs2
5%


DP

20MB 18.88MB

vs2
5%


DP

20MB 18.88MB

vs2
5%


RW

20MB 18.88MB

vs2
5%


LS

20MB 18.88MB

Source
Path

Destination Mirror
Type Path

State

Relationship Total
Status

Progress Healthy

------------- ---- ------------ ------------- -------------- ---------- ------netappu://vs2/vs2_root_ls1
DP netappu://vs2/vs2_root_dp1
Snapmirrored Idle

-

true

-

true

-

true

netappu://vs2/vs2_root_dp2
Snapmirrored Idle
Snapmirrored Idle
netappu://vs2/vs2_root_ls1 -foreground true
irror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.201304-04_162940.

Task 6

login: admin
(cluster setup)




join}:
create

System Defaults:




Enter the cluster name: other

Creating cluster other


Cluster other has been created.






Enter the cluster management interface port [e0c]:

A cluster management interface on port e0c with IP address
192.168.66.125 has been created. You can use this address to connect
to and manage the cluster.



SFO is licensed.


Where is the controller located []: netappu
Enter the node management interface port [e0f]:


those nodes.



1) Using the NetApp System Manager to manage cluster other at
192.168.66.125.

station:
ssh admin@192.168.66.125


login:
login: admin

(cluster setup)




join}:
create

System Defaults:




Enter the cluster name: other

Creating cluster other


Cluster other has been created.














Enter the cluster management interface port [e0c]:


A cluster management interface on port e0c with IP address
192.168.66.125 has been created. You can use this address to connect
to and manage the cluster.



SFO is licensed.


Where is the controller located []: netappu


those nodes.


192.168.66.125.

station:
ssh admin@192.168.66.125


login:
Re-join node3/4
login: admin
(cluster setup)




join}:
join

System Defaults:



Step 1 of 3: Join an Existing Cluster

Enter the name of the cluster you would like to join {netappu, other}:
other

Joining cluster other

Starting cluster support services ....

This node has joined the cluster other.


SFO is licensed.


Enter the node management interface netmask [255.255.255.0]:
Enter the node management interface default gateway [192.168.66.2]:



those nodes.


192.168.66.125.

station:
ssh admin@192.168.66.125


login:
Exe 14
netappu::> vol show
(volume show)
Vserver Volume
Used%

Aggregate State

Type

Size Available

--------- ------------ ------------ ---------- ---- ---------- ---------- ----netappu-01
vol0

aggr0

online

RW

netappu-02
vol0

aggr0_netappu_02_0

851.5MB 505.2MB 40%

online

RW

851.5MB 475.8MB 44%

vs1
5%

volume1

n01_aggr1 online

RW

20MB 18.88MB

vs1
99%

volume2

n02_aggr1 online

RW

400GB 244.1MB

vs1

vs1root

vs2

dataefficiency

n01_aggr1 online

n02_aggr1 online
vs2

RW

RW

20MB 18.88MB 5%

100MB 58.26MB 41%

dataefficiency_clone_splited
n02_aggr1 online

RW

100MB 59.13MB 40%

vs2
5%


DP

20MB 18.88MB

vs2
5%


DP

20MB 18.88MB

vs2
5%


RW

20MB 18.88MB

vs2
5%


LS

20MB 18.88MB

vs2
5%

vs2_vol01 n01_aggr1 online

RW

400MB 379.8MB

vs2
5%


RW

20MB 18.89MB

vsISCSI1 lun_vsISCSI1_1_vol
n01_aggr1 online

Vserver Volume
Used%

RW

Aggregate State

123.3MB 20.76MB 83%

Type

Size Available

--------- ------------ ------------ ---------- ---- ---------- ---------- ----vsISCSI1 vsISCSI1_root
n01_aggr1 online

RW

20MB 18.89MB 5%


netappu::> vol snapshot show -volume vs2_vol01

State

Size Total% Used%

-------- ------- ------------------------------- -------- -------- ------ ----vs2

vs2_vol01
daily.2013-04-04_0010

valid

84KB

0% 26%

hourly.2013-04-04_1405

valid

88KB

0% 27%

hourly.2013-04-04_1505

valid

88KB

0% 27%

hourly.2013-04-04_1605

valid

88KB

0% 27%

hourly.2013-04-04_1705

valid

88KB

0% 27%

hourly.2013-04-04_1805

valid

88KB

0% 27%

hourly.2013-04-04_1905

valid

88KB

0% 27%


netappu::> vol move start -vserver vs2 -volume vs2_vol01 -destinationaggregate n01_aggr1 -foreground true
(volume move start)
Volume vs2_vol01 is already on aggregate n01_aggr1.

(volume move start)

Error: command failed: There is 244.1MB of available space on the
aggregate
n02_aggr1 which is not enough to accommodate a volume.

netappu::> job show

Owning
Job ID Name

Vserver Node

State

------ -------------------- ---------- -------------- ---------1

Certificate Expiry Check
netappu -

Queued

Description: Certificate Expiry Check
2

CLUSTER BACKUP AUTO 8hour
netappu -

Queued

Description: Cluster Backup Job
3

CLUSTER BACKUP AUTO daily
netappu -

Queued

4

CLUSTER BACKUP AUTO weekly
netappu -

Queued

5

Vol Reaper

netappu -

Queued

Description: Vol Reaper Job
62

SnapMirrorDaemon_4_2147484676
netappu netappu-01

Dormant

Description: Snapmirror Daemon for 4_2147484676

69

netappu netappu-01

Dormant


Owning
Job ID Name

Vserver Node

State

------ -------------------- ---------- -------------- ---------71

netappu netappu-01

Dormant


netappu::> job show -id 71
Owning
Job ID Name

Vserver Node

State

------ -------------------- ---------- -------------- ---------71

netappu netappu-01

Dormant


netappu::>
Task 2
Aggregate
Status


RAID

--------- -------- --------- ----- ------- ------ ---------------- -----------aggr0


1 netappu-01

raid_dp,

normal
aggr0_netappu_02_0

1 netappu-02

raid_dp,

normal

8 netappu-01

raid_dp,

normal
n02_aggr1 2.64GB 240.1MB 91% online
raid_dp,

5 netappu-01

normal
n02_fp1

7.03GB 7.03GB 0% online

0 netappu-02

hybrid,
normal

raid_dp,

netappu::> vol show -aggr n01_aggr1
(volume show)
Vserver Volume

Aggregate State

Type

Size Available Used%

--------- ------------ ------------ ---------- ---- ---------- ---------- ----vs1

volume1

n01_aggr1 online

vs1

vs1root

vs2


DP

20MB 18.88MB 5%

vs2


RW

20MB 18.88MB 5%

vs2


RW

400MB 379.8MB 5%

vs2


RW

20MB 18.89MB 5%

n01_aggr1 online

RW
RW

20MB 18.88MB 5%
20MB 18.88MB 5%

vsISCSI1 lun_vsISCSI1_1_vol
n01_aggr1 online

RW

123.3MB 20.76MB 83%

RW

20MB 18.89MB 5%

vsISCSI1 vsISCSI1_root
n01_aggr1 online

netappu::>
netappu::> stor aggr create -aggr n01_aggr1_new -diskcount 6

netappu::> vol move start -vserver vs2 -volume vs2_vol01 -destination-aggregate n01_aggr1_new
(volume move start)
[Job 87] Job is queued: Move "vs2_vol01" in Vserver "vs2" to aggregate "n01_aggr1_new". Use the
"volume move show -vserver vs2 -volume vs2_vol01" command t

netappu::> stor aggr show n01_aggr1

Size: 2.64GB
Used Size: 347.1MB
Used Percentage: 13%
State: online
Nodes: netappu-01
Number Of Disks: 5
netappu-01:v5.20,
netappu-01:v5.21,
netappu-01:v5.22,
netappu-01:v5.24
RAID Type: raid_dp
Max RAID Size: 16

Inconsistent: false
Hybrid: false
HA Policy: sfo
Volume Style: flex
Is Root: false
Block Type: 64-bit
netappu::> stor aggr delete n01_aggr1
(storage aggregate delete)

Warning: Are you sure you want to destroy aggregate "n01_aggr1"?
{y|n}: y

Error: command failed: It is not allowed to delete an aggregate that contains
volume(s). Please first remove all of the volumes on the aggregate.
netappu::> stor aggr rename -aggr n01_aggr1_new -newname n01_aggr1
(storage aggregate rename)

Error: comma netappu::> stor aggr rename -aggr n01_aggr1_new -newname n01_aggr2
(storage aggregate rename)
nd failed: An aggregate already uses n01_aggr1 as name

Task 3

netappu::> net int modify -vserver vs2 -lif

Error: Missing value for -lif.

Logical Status
Vserver

Network

Current


Current Is
Node

----------- ---------- ---------- ------------------ ------------- ------- ---netappu

Port Home


true

netappu-01
clus1

up/up 169.254.144.226/16 netappu-01 e0a

true

clus2

up/up 169.254.124.226/16 netappu-01 e0b

true

mgmt1

up/up 192.168.66.121/24 netappu-01 e0f

true

netappu-02
clus1

up/up 169.254.89.72/16 netappu-02 e0a

clus2

up/up 169.254.244.76/16 netappu-02 e0b

mgmt1

true
true

up/up 192.168.66.122/24 netappu-02 e0f

true

vs1
data1

up/up 192.168.66.131/24 netappu-02 e0d

true

vs2
vs2nas1

up/up 192.168.66.132/24 netappu-02 e0d

true

vs2nas2

up/up 192.168.66.133/24 netappu-01 e0d

true

vsISCSI1
netappu-01_iscsi_if1
up/up 192.168.66.134/24 netappu-01 e0c

true

up/up 192.168.66.135/24 netappu-01 e0d

Logical Status
Vserver

Network

Current


Current Is
Node

----------- ---------- ---------- ------------------ ------------- ------- ---vsISCSI1

true

Port Home

up/up 192.168.66.136/24 netappu-02 e0c

true

up/up 192.168.66.137/24 netappu-02 e0d

true


netappu::> net int modify -vserver vs2 -lif data1 -firewall-policy mgmt

Error: command failed: entry doesn't exist

netappu::> net int modify -vserver vs2 -lif vs2nas1 -firewall-policy mgmt

netappu::>
login as: vs2admin
Using keyboard-interactive authentication.
Password:
vs2::> cluster show

Error: "cluster" is not a recognized command

vs2::>
vs2::> vol show
(volume show)
Vserver Volume

Aggregate State

Type

Size Available Used%

--------- ------------ ------------ ---------- ---- ---------- ---------- ----vs2

dataefficiency
n02_aggr1 online

vs2

RW

100MB 58.26MB 41%

dataefficiency_clone_splited
n02_aggr1 online

RW

100MB 59.13MB 40%

vs2


DP

20MB 18.88MB 5%

vs2


DP

20MB 18.88MB 5%

vs2


RW

20MB 18.88MB 5%

vs2


LS

20MB 18.88MB 5%

vs2


RW

400MB 379.8MB 5%

vs2


RW

20MB 18.89MB 5%


vs2::> vol modify -volume vs2_vol01 -comment "modified by vs2admin"
(volume modify)

vs2::> vol show -volume vs2_vol01 -instance
(volume show)

Vserver Name: vs2
Volume Name: vs2_vol01
Volume Size: 400MB

Volume Type: RW
Volume Style: flex
User ID: 0
Group ID: 1
UNIX Permissions: ---rwxrwxrwx
Junction Path: /vs2vol1
Junction Path Source: RW_volume
Junction Active: true
Junction Parent Volume: vs2_root_ls1
Comment: modified by vs2admin
Used Size: 252KB
Used Percentage: 5%
Maximum Autosize (for flexvols only): 480MB
Autosize Increment (for flexvols only): 20MB

Creation Time: Wed Apr 03 15:06:12 2013
Clone Volume: false
NVFAIL Option: off
Extent Option: off

Block Type: 64-bit

vs2::>
login as: vs2intern
Using keyboard-interactive authentication.
Password:
vs2::> network port show

Error: "port" is not a recognized command

vs2::> network int show
Logical Status
Vserver

Network

Current


Current Is
Node

Port Home

----------- ---------- ---------- ------------------ ------------- ------- ---vs2
vs2nas1

up/up 192.168.66.132/24 netappu-02 e0d

true

vs2nas2

up/up 192.168.66.133/24 netappu-01 e0d

true


vs2::> vol modify -volume vs2_vol01 -comment "modified by vs2intern"

Error: "modify" is not a recognized command

vs2::>

C mode class

Recommended

More Related Content

What's hot (19)

Similar to C mode class (20)

More from Accenture (20)

Recently uploaded (20)

C mode class