Canteen automation system (updated) revised

Canteen Automation System
MAJOR PROJECT SYNOPSIS
Submitted by:-
In partial fulfillment for the award of the degree
Of
BACHELOR OF ENGINEERING
In
COMPUTER SCIENCE &ENGINEERING
DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING
GYAN GANGA INSTITUTE OF TECHNOLOGY & SCIENCES
JABALPUR (M.P.)
RAJIV GANDHI PRODYOGIKI VISHWAVIDYALAYA,
BHOPAL (M.P.)
(DEC- 2016)
Sanil Sharma 0206CS131121
Pranchal Jain 0206CS131095
Rinshi Jain 0206CS131110
Roshni Gupta 0206CS131114

CERTIFICATE
This is to certify that the Major Project Synopsis entitled Canteen Automation System
submitted by Sanil Sharma, Rinshi Jain, Roshni Gupta and Pranchal Jain has been carried
out under my guidance & supervision. The project report is approved for submission towards
partial fulfillment of the requirement for the award of the degree of BACHELOR OF
ENGINEERING in COMPUTER SCIENCE & ENGINEERING from RAJIV GANDHI
PROUDYOGIKI VISHWA-VIDYALAYA, BHOPAL (M.P).
Dr. Preeti Rai
Guide
Dept. of Computer Science and Engineering
Prof. Ashok Verma
HOD
Dept. of Computer Science and Engineering

CERTIFICATE
This is to certify that the Major Project report entitled Canteen Automation System is
submitted by Sanil Sharma, Rinshi Jain, Roshni Gupta and Pranchal Jain for the partial
fulfillment of the requirement for the award of the degree of BACHELOR OF
ENGINEERING in COMPUTER SCIENCE & ENGINEERING from RAJIV GANDHI
PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL (M.P).
Internal Examiner External Examiner
Date: Date:

DECLARATION
We hereby declare that the project entitled Canteen Automation System which is
being submitted in partial fulfillment of the requirement for award of the Degree of Bachelor
of Engineering in Computer Science and Engineering to RAJIV GANDHI PROUDYOGIKI
VISHWAVIDYALAYA, BHOPAL (M.P.) is an authentic record of our own work done
under the guidance of Dr. Preeti Rai, Department of Computer Science & Engineering,
GYAN GANGA INSTITUTE OF TECHNOLOGY & SCIENCES, JABALPUR.
The matter reported in this Project has not been submitted earlier for the award of any
other degree.
Date:
Place: JABALPUR

ACKNOWLEDGEMENT
We sincerely express indebtedness to esteemed and revered guide Dr. Preeti Rai of
Department of Computer Science and Engineering for his invaluable guidance, supervision,
and encouragement throughout the work. Without his kind patronage and guidance, the
synopsis would not have taken shape.
We take this opportunity to express a deep sense of gratitude to Prof. Ashok
Verma, Head of Department of Computer Science and Engineering for his encouragement
and kind approval. Also, we thank him for providing the computer lab facility. We would like
to express our sincere regards to him for advice and counseling from time to time.
We owe sincere thanks to all the faculties in Department of Computer Science
and Engineering for their advice and counseling time to time.
Date :
Place : JABALPUR
Sanil Sharma
Rinshi Jain
Pranchal Jain
Roshni Gupta

TABLE OF CONTENTS
Serial
No.
Title Page No.
ABSTRACT 1
1. INTRODUCTION 2
1.1 Purpose of Project 2
1.2 Project and Product Overviews 3
1.3 Team Architecture 4
1.4 Overall Description 5
2. PROBLEM STATEMENT 6
2.1 Business Requirements 7
2.1.1 Entry Point 7
2.1.2 Selection of Product 7
2.1.3 Reports 7
2.2 System Requirement 7
2.2.1 Usability 7
3. PROJECT UNDERSTANDING DOCUMENTS 8
3.1 Purpose of Project 8
3.2 Objective 8
4. REQUIREMENTS 9
4.1 Specific Requirements 9
4.1.1 External Interface Requirements 9
4.1.2 Hardware Requirements 9

4.1.3 Software Interface 9
4.2 Functional Requirements 10
4.3 Non-Functional Requirements 11
5. DESIGN TECHNIQUES 12
5.1 HTML 12
5.2 PHP 13
5.3 MySQL 13
6. TIER ARCHITECTURE. 14
7. SOFTWARE PROCESS MODEL 16
7.1 Why not Evolutionary models? 16
7.2 Why not Waterfall model? 16
7.3 Why Incremental RAD model? 16
7.4 Observation 17
7.5 Determining project feasibility 17
8. DESIGN 18
8.1 USE CASE DIAGRAM 18
8.2 CLASS DIAGRAM 21
8.3 SEQUENCE DIAGRAM 25
8.4 ER DIAGRAM 29
8.5 DATA FLOW DIAGRAM 31
9. DATABASE TABLES 34
10. BIBLIOGRAPHY 37

LIST OF FIGURES
Serial No. Figure Name Page No.
1. USE CASE DIAGRAM 18
1.1 Use Case Diagram for Login 18
2.
3.
4.
5.
1.2 Use Case Diagram for Registration
1.3 Use Case Diagram for Order ,Payment &
Update
CLASS DIAGRAM
2.1 Class Diagram for Login
2.2 Class Diagram for Registration
2.3 Class Diagram for Order & Update
2.4 Class Diagram for Payment
SEQUENCE DIAGRAM
3.1 Sequence Diagram for Login
3.2 Sequence Diagram for Registration
3.3 Sequence Diagram for Payment
3.4 Sequence Diagram for Placing Order
3.5 Sequence Diagram for Updating Menu
ER DIAGRAM
DATA FLOW DIAGRAM
5.1 DFD for Admin
5.2 DFD for Canteen Owner
5.3 DFD for Customer
19
20
21
21
22
23
24
25
25
26
27
28
28
29
31
32
33
33

DATABASE TABLE
TABLE NAME PAGE NO.
1. Customer 34
2. Admin 35
3. Canteen Owner 35
4. Menu 36
5. Order 36
6. Payment 36

Page | 1
ABSTRACT:
The Project “Canteen Automation System” enables the end users to register online, read and
select the food from e-menu card and order food online by just selecting the food that the user
want to have using android application. The results after selecting the food from the E-menu
card will directly appear on the screen near the Chef who is going to cook the food for you.
The system is the combination of Android as well as Web Application. By using this
application the work of the waiter is reduced and we can also say that the work is nullified. The
benefit of this is that if there is a rush in the Canteen then there will be chances that the waiters
will be unavailable and the users can directly order the food to the chef online by using this
application. The user will have a username and a password, by using which they can login into
the system. This implies that the customer is the regular user of the Canteen.
The manual system involves paperwork in the form of maintaining various files and
manuals. Maintaining critical information in the files and manuals is full of risk and a tedious
process. Including a framework showing how to apply Internet technology progressively as
skills and confidence grow, the project demonstrates the route from adapting materials to
developing an online environment.
Nowadays people don’t have much time to spend in canteen by just there and waiting
for the waiter to take their order. Many customers visit the canteen in their lunch break and
recess so they have limited time to eat and return to their respective office and colleges. So this
software helps them to save time and order food whenever they want without calling the waiter
again and again.

Page | 2
1. INTRODUCTION:
In today’s age of fast canteen automation in the canteen, many canteens have chosen to focus
on quick preparation and speedy delivery of orders. Until very recently, all of this delivery of
orders were placed over the phone, but there are many disadvantages to this system, including
the inconvenience of the customer needing to have a physical copy of the menu, lack of a visual
confirmation that the order was placed correctly, and the necessity for the canteen to have an
employee answering the phone and taking orders.
The main advantage of an online ordering system is that it greatly simplifies the ordering
process for both the customer and the canteen. When the customer visits the ordering web page,
they are presented with an interactive and up-to-date menu, complete with all available options
and adjusting prices based on the selected options. After making a selection, the item is then
added to their order, which the customer can review the details at any time before checking
out. This provides instant visual confirmation of what was selected.
This system also greatly lightens the load on the canteen’s end, as the entire process of taking
orders is automated. Once an order is placed on the web page, it is entered into the database
and then retrieved, in pretty much real-time, by a web-based application on the canteen’s end.
Within this application, all items in the order are displayed, along with their corresponding
options and delivery details, in a concise and easy to read manner. This allows canteen
employees to quickly go through the orders as they are placed and produce the necessary items
with minimal delay and confusion.
1.1. PURPOSE OF PROJECT
Canteen Automation System is the system where customers order their food and receive food
in the canteen without any delay as they can directly go and collect what they ordered without
waiting for a turn or waiting time. This system aims to accelerate customer orders and customer
order system used by employees to accept customer order.
The purpose of the system is to develop a simple Canteen Automation System and implement
it, which later will be used for a web-based application.
The proposed “Canteen Automation System” is economically feasible because:
 The system requires very fewer time factors as compared to manual system
 The system will provide fast and efficient automated environment instead of slow and
error prone manual system, thus reducing both time and manpower spent in running the
system.
 The system will have GUI interface and very less user training is required to learn it.

Page | 3
1.2. PROJECT & PRODUCT OVERVIEWS
A complete canteen automation system makes canteen workers monitor overall day to day
business analytics more accurately with an ease. It increases the presence of canteen fascinates
core customers towards your food business leading to increased sales.
By bringing all necessities in one place canteen automation system benefits both the user as
well as the canteen owner smartly. Ultimately all business operation will be mad easier and
single handed with the required inbuilt features.
The working of canteen automation system is similar to an e-commerce website. Whenever
your customers are busy with their work, instead of coming to your canteen they can just open
your website, choose the menu they like and can simply order food.
As soon as order gets placed, you will be notified immediately, so that you can start order
processing. One of the main advantages of canteen automation system is the order details are
accurate when compared to the phone ordering system or manual system.
1.3. HOW ITS BENEFITS A CANTEEN
Canteen automation system saves the canteen’s time by avoiding the food orders over the
phone that has to be done manually. By making the ordering process fully automated, it
increases the cost effectiveness and productivity of the canteen with a less manpower. In
addition, it keeps you one step ahead of your competitors who don’t serve online.
Canteen automation system even helps a casual dining canteen and provides an additional
revenue source. It allows a canteen owner to easily update the online menu, food items etc and
helps to stay in touch with the customers by offering discounts and targeted promotions. With
a simplified management process, online ordering system makes it easy to handle multiple
canteens from centralized application
1.4. HOW IT BENEFITS A CUSTOMER
Now a day’s people are getting busy with their work, making the canteen online even saves
customers time undoubtedly. Is allow them to order food online by creating a flexible ordering
platform and serve them in time. The customer can select the food items from the online menu
on the canteen website and can order accordingly as per their interest. In fact, they can place
order the food orders within their budget by adding or removing the food items as per the cost
variations
This canteen automation system is useful for the canteen as well customer because canteen
automation system save the time of the canteen's workers as well of the customers and as
saves the manpower.

Page | 4
1.5 TEAM ARCHITECTURE
There were four members in our project. The complete project is divided into two teams.
TEAM 1:
REQUIREMENT GATHERING & PLANNING
Planning identifies all deliverable services, describes the facilities, and defines the working to
provide details about lab details to the faculties. This planning problem starts with a
specification of user demand that is to be met by the production plan. For this context, the
facilities provided to the user faculties are the major concern to be concentrated. This includes
the easiest and efficient way to make them available an unoccupied lab. Consequently, all the
fields must be kept while developing. Generally, a planning problem exists because there are
limited production resources that cannot be stored from period to period. Choices must be made
as to which resources to include and how to model their capacity and behavior, and their costs.
Also, there may be uncertainty associated with the production function, such as uncertain yields
or lead times. One might only include the most critical or limiting resource in the planning
problem. Here comes the role of proper requirement gathering. If the requirements of the user
are clear then it is quite easier for the developer to fulfill his all needs. As he can look into all
the required resources, and with proper planning and cost estimation, he can achieve his
software.
Thus, a proper planning and requirement gathering leads to an efficient software system.
TEAM 2:
DESIGNING AND BACKEND
Designing is the most important and the most efficient function while software development.
Without a proper design, it is very difficult to develop an appropriate software that fulfills
nearly all user demands. Therefore, managing designing part in an organization is a critical
activity. A designer needs to ensure that the design created by him can be easily understood by
the all the members of developing a team. A proper design will allow the coder to implement
the system development planning properly. Similarly, the backend part that includes the
database management plays a key role in any of the systems. Thus, the team working on this
field must know proper handling and management of database and its tools.

Page | 5
1.6 OVERALL DESCRIPTION
Time Saving: Our canteen automation system is developed with a primary aim of 'Saving
Time. The customer can order the food and it is also efficient for canteen workers because this
system takes lesser time as compared to phone based or manually based system.
No Complication: Major complication part for canteen automation system is adding a product
or managing products section. In our canteen automation system, no complicated part is
involved in managing sections; we have taken immense care in this section and nullified all
complications which make this system accurate and unique.
Cost Effective: It's cheaper. You don't have to purchase multiple copies of software to install
on multiple computers. Multiple copies often require you to pay multiple licensing fees, but
since you aren't actually purchasing any software with an online system, that's not a concern.
Security: Online systems are just as secure. Most online canteen automation system programs
allow you to create multiple user accounts with various levels of access. Your data is stored on
secure, protected servers that feature firewalls and other online security programs.
1.7 PRODUCT PERSPECTIVE
The system will be developed using PHP, HTML, CSS and other Web tools.
Product Functions
The product developed will provide an easy access to the user to manage and alter the
canteen automation according to the need.
General Constraints
 The cost constraint includes ordering additional hardware to run the new system
 No current web-site
 Security must be upgraded for on-line searching.
Assumptions
 The system will support all browsers.
 The processor must be at least Dual cored and can be any other latest ones etc.

Page | 6
2. PROBLEM STATEMENT
The Challenges encountered by the manual system in canteens is efficiency and customer
satisfaction. The experience of ordering in most fast food canteens is not pleasant for
customers. Customers have to make long queues before placing the order and when the order
is placed they have to wait near the counter until the order is prepared. The another problem is
efficiency that food canteen should maintain in their standard operations and keep with the
quality of their product and services no matter how much crowd is present in canteen but they
have to maintain efficiency as well as quality of product .however, we think that there are some
issue concerning the traditional way to order food in canteens.
The major issues are as follows
 Verbal communication between cashier and customer or we can say telephonic
communication: The verbal communication between two parties for placing an
order and the information about bill should also result in error means error also occurs
in understanding what the person want to say and especially in busy hours in
canteens. When the place is very crowded and noisy, miscommunications are
common. The problem is even Worsen if the cashier and/or the customers do not
speak the native language.
 Food customization: The ability to customize food has been a crucial business
strategy in the food industry since McDonald’s slogan “I’m Lovin’ it” for the
campaign. Food customization allows some flexibility for customers who have a
special request (less ice for soda, no pickles etc.) and is especially necessary for
customers who are allergic to some ingredients .currently, the cashier has to
memorize these requests since the existing system does not support any means of
recording such request. The result is that the request are forgotten or
miscommunication to the cook.
 Menu display: Today’s competition between food canteens motivates each canteen
to launch new items on their menus on a more frequent basis. However, the menu in
more canteens usually attached to a wall behind the counter and the customer are not
aware of that new item because the menu is not up-to-date. Furthermore, not all item
on the menu list has a graphical illustration to help customers to take Decision easily
what they want. The print is sometimes small that it’s not visible to the customers.

Page | 7
2.1 BUSINESS REQUIREMENTS:
2.1.1 ENTRY POINT
The system is required to have two entry points:
1) Canteen Management Direct: A Canteen Management Direct entry point is where
the manager can manage the canteen and service the customer requests.
2) Customer Linking: A Customer Linking entry point is where a prospective
customer can view the details of products and place their order.
2.1.2 SELECTION OF PRODUCT
Based upon the customer’s request the feasibility of supplying product is evaluated.
The customer request is fulfilled according to the order placed.
2.1.3 REPORTS
 Annual reports
 Monthly reports
 Sales reports
 Customer trends
2.2 SYSTEM REQUIREMENT
Performance and Scalability: The system is required to scale to support transaction
volume. Web Pages should be light and render fast.
2.2.1 USABILITY
The web forms should be self-explanatory and usable. We do not want prospective
clients dropping of the website because they cannot understand the forms and find them
cumbersome.

Page | 8
3. PROJECT UNDERSTANDING DOCUMENTS
3.1 PURPOSE OF PROJECT
Canteen Automation System is the system where customers order their food and receive food
in the canteen without any delay as they can directly go and collect what they ordered without
waiting for a turn or waiting time. This system aims to accelerate customer orders and customer
order system used by employees to accept customer order.
The purpose of the system is to develop a simple Canteen automation Software and implement
it, which later will be used for a web-based application.
The proposed “Canteen Automation System” is economically feasible because
 The system requires very fewer time factors as compared to manual system
 The system will provide fast and efficient automated environment instead of slow and
error prone manual system, thus reducing both time and manpower spent in running the
system.
 The system will have GUI interface and very less user training is required to learn it.
3.2 OBJECTIVE
Our objective is to make a platform independent application to maintain a database of
all orders ordered from various sources and all the different services required by each of them.
Established canteen automation practices should provide the needed connectivity and
accountability between those two operational units, and when managed properly, enhances the
effectiveness of both operations.
 Registration
 Order
 Payment
 Update
The above are the modules of canteen automation system.

Page | 9
4. REQUIREMENTS
4.1 SPECIFIC REQUIREMENTS
4.1.1 EXTERNAL INTERFACE REQUIREMENTS
The external system is to assume full responsibility for storage functions as well as
warehouse management and warehouse control for an entire warehouse. The
interfaces in this section are specified by documenting: the name and description of
each scheme, source or input, destination or output, ranges, accuracy and tolerances,
units of measure, timing, display formats, and organization, and data formats.
The user interface required to be developed for the system should be
user-friendly and attractive. The interface between the user and the system will be
WIMP (Windows, Icons, Menu, Pointers) keeping in mind that the system is to be
run through a web browser. All operations will be off point and click nature with all
navigations performed through windows of the system specifically buttons and
menus:
Buttons: The button is activated when the user will click on the left click of the
mouse within the bounds of the button. And thus the action associated with it will be
carried out.
Menu: All the operations will be arranged.
4.1.2 HARDWARE REQUIREMENT
Here's what you Need to Use the canteen automation system for online records:
• 20 GB HDD
• 256 MB RAM
• Pentium IV Processor
• Input Devices: Keyboard, Mouse
• Output Devices: Monitor, Printer
4.1.3 SOFTWARE REQUIREMENT
 Operating System: Window XP and above
 Browsers : Chrome or any other latest web page supporting browser

Page | 10
4.2 Functional Requirements:
Users of the canteen automation system, namely canteen customers, must be provided the
following functionality:
 Create an account.
 Manage their account.
 Log into the system.
 Navigate the canteen’s menu.
 Select an item from the menu.
 Customize options for a selected item.
 Add an item to their current order.
 Review their current order.
 Remove an item/remove all items from their current order.
 Provide payment details.
 Place an order.
 Receive confirmation in the form of an order number.
Menu Management System
The menu management system will be available only to canteen employees and will, as the
name suggests, allow them to manage the menu that is displayed to users of the web ordering
system. The functions afforded by the menu management system provide the user with the
ability to, using a graphical interface:
 Add a new/update/delete food category to/from the menu.
 Add a new/update/delete food item to/from the menu.
 Add a new/update/delete option for a given food item.
 Update default options for a given food item.
 Update additional information (description, photo, etc.) for a given food item.
Order Retrieval System
Of the three components, the order retrieval system is functionally the simplest. Like the menu
management system, it is designed to be used only by canteen employees, and provides the
following functions:
 Retrieve new orders from the database.

Page | 11
 Display the orders in an easily readable, graphical way.
 Mark an order as having been processed and remove it from the list of active orders.
User Interface Specifications:
Each of the system components will have their own unique interface. These are described
below.
Web Ordering System
Users of the web ordering system will interact with the application through a series of simple
forms. Each category of food has its own form associated with it which presents a drop down
menu for choosing which specific item from the category should be added to the order.
Adding an item to the order is accomplished by a single button click. Users select which
category of food they would like to order, and therefore which form should be displayed, by
navigating a menu bar, an approach which should be familiar to most users.
Entering delivery and payment deals is done in a similar manner. The user is presented with a
form and must complete the required fields, which include both drops down and text boxes,
before checking out and receiving a confirmation number.
4.3 Non-functional Requirements:
Performance Criteria:
 Time:
The elapsed time between the submission of order process between the customer
and cashier in a canteen should be as minimum as possible.
 User-friendly:
Our canteen automation system should be more users friendly. The
user interface should be kept simple and uncluttered. Since the different type of people
will interact with this process so our project should be very easy to them to understand.
 Flexibility:
Our project should be so flexible that whenever we want to make changes in it
very easily it can be done.

Page | 12
 Extensibility:
It should be able to accommodate the variations like:
1. The different order should be handled easily.
2. It should be an option for cash on delivery, pay through card between customer
and canteen.
 Portable:
Our project should be portable on any platform and available on websites easily
and at a faster speed than others.
 Reusable:
All the customer web pages that are being used for customer information should
be easily get processed so that many customers can interact with us very easily and very
fast without any information destroy.
5. DESIGN TECHNIQUES
The design of the site has been done using the following technologies:-
 HTML,CSS
 PHP
 MySQL
5.1 HTML: HYPER TEXT MARKUP LANGUAGE
In computing, Hypertext Markup Language (HTML) is a markup language designed
for the creation of web pages with hypertext and other information to be displayed in a web
browser. HTML is used to structure information denoting certain text as headings, paragraphs,
lists and so on and can be used to describe, to some degree, the appearance and semantics of a
document. HTML’s grammar structure is the HTML DTD that was created using SGML
syntax.
The HTML document format is used on the Web. Web pages are built with HTML tags
(codes) embedded in the text. HTML defines the page layout, fonts, and graphic element as
well as the hypertext links to other documents on the web. Each link contains the URL, or
address, of a Web page residing on the same server or any server worldwide, hence “World
Wide Web”.
HTML 2.0 was defined by the Internet Engineering Task Force (IETF) with a basic set
of features, including interactive forms capability. Subsequent versions added more features
such as blinking text, custom backgrounds and tables of contents. However, each new version
requires agreement on the tags used, and browsers must be modified to implement those tags.
HTML is a markup language (the ML in HTML) that uses a fixed set of markup tags.
A markup language can also be thought of as a “Presentation Language”, but it is not a
programming language. You cannot “if this-do that” like you can in Java, JavaScript or C++.

Page | 13
However, in order to make pages interactive, programming code can be embedded in an HTML
page. For example, JavaScript is widely interspersed in Web pages (HTML pages) for that
purpose. HTML was conceived as a simple markup language to render research documents.
No one envisioned Web pages turning into multimedia extravaganzas. HTML pages have been
reworked, jury-rigged and extended into full-blown applications.
As a result, the source code behind today’s Web pages is often a hideous concoction of
tags and scripting.
CSS: CASCADING STYLE SHEETS
Cascading Style Sheets (CSS) is a stylesheet language used for describing the look
and formatting of a document written in a markup language. While most often used to change
the style of web pages and user interfaces written in HTML and XHTML, the language can be
applied to any kind of XML document, including plain XML, SVG, and XUL. Along with
HTML and JavaScript, CSS is a cornerstone technology used by most websites to create
visually engaging Webpages, user interfaces for web applications, and user interfaces for many
mobile applications.[1]
5.2 PHP
PHP is a server-side scripting language designed for web development but also used as a
general-purpose programming language. As of January 2013, PHP was installed on more than
240 million websites (39% of those sampled) and 2.1 million web servers.2 Originally created
by Rasmus Lerdorf in 1994, the reference implementation of PHP (powered by the Zend
Engine) is now produced by The PHP Group. While PHP originally stood for Personal Home
Page, it now stands for PHP: Hypertext Preprocessor, which is a recursive backronym.
PHP code can be simply mixed with HTML code, or it can be used in combination with various
templating engines and web frameworks.
PHP code is usually processed by a PHP interpreter, which is usually implemented as a web
server's native modular a Common Gateway Interface (CGI) executable. After the PHP code
is interpreted and executed, the web server sends resulting output to its client, usually in form
of a part of the generated web page – for example PHP code can generate a web page's HTML
code, an image, or some other data. PHP has also evolved to include a command-line interface
(CLI) capability and can be used in standalone graphical applications.
5.3 MySQL
Modern day websites seem to be relying more and more on complex database systems.
These systems store all of their critical data and allow for easy maintenance in some cases. The
Structured Query Language (SQL) is a very popular database language, and its standardization
makes it quite easy to store, update and access data. One of the most powerful SQL servers out
there is called MySQL and surprisingly enough, it’s free. Some of the features of MySQL

Page | 14
Include: Handles large databases, in the area of 50,000,000+ records. No memory leaks. Tested
with a commercial memory leakage detector (purify). A privilege and password system which
is very flexible and secure, and which allows host-based verification. Passwords are secure
since all password traffic when connecting to a server is encrypted.
6. TIER ARCHITECTURE.
The various classes as obtained from the business class diagram is categorized as
follows-
Form of the project Class Class
The 3 tier architecture consists of three layers:
Presentation Layer - The website or windows forms application is called the
presentation layer. The presentation layer is the most important layer simply because it’s the
one that everyone sees and uses. Even with a well-structured business and data layer, if the
presentation layer is designed poorly, this gives the users a poor view of the system. The
presentation layer is the form where we design using the controls like textbox, labels, command
buttons etc.
Business Layer - Though a website could talk to the data access layer directly, it
usually goes through another layer called the business layer.
This layer is a class which we use to write the function which works as a mediator to
transfer the data from Application or presentation layer data layer. In the three-tier architecture,
we never let the data access layer to interact with the presentation layer.
This layer is also a class where we declare the variable corresponding to the fields of
the database which can be required for the application and make the properties so that we can
get or set the data using these properties into the variables. These properties are public so that
we can access its values.
One of the best reasons for reusing logic is that applications that start off small usually
grow in functionality. For instance, a company begins to develop a website, and as they realize
their business needs, they later decide to add a smart client application and windows service to
Application or
Presentation
Layer
Business Layer
or Logical Layer
Data Layer or
Data Access
Layer

Page | 15
supplement the website. The business layer helps move logic to a central layer for “maximum
reusability.”
Business layer have been presented having two roles
 client application
 server component
An example of Business Layer-The Business layer has functions of which takes the
parameters from the example given in the presentation layer .As the user inputs the data values,
corresponding functions are called in the business layer which is further passed on through the
data layer where corresponding procedures are called and the data is been updated.
The business layer is the class where we write the functions which get the data from the
application layer and passes through the data access layer.
Data layer - The key component to most applications is the data. The data has to be
served to the presentation layer somehow. The data layer is a separate component whose sole
purpose is to serve up the data from the database and return it to the caller. This layer is also a
class which we use to get or set the data to the database back and forth. This layer only interacts
with the database. We write the database queries or use stored procedures to access the data
from the database or to perform any operation to the database.
ADVANTAGE OF 3 TIER ARCHITECTURE
 Client-Server architecture is 2-Tier architecture because the client does not
distinguish between Presentation layer and business layer.
 The increasing demands on GUI controls caused difficulty to manage the mixture of
source code from GUI and Business Logic.
 Further, Client Server Architecture does not support enough the Change
Management. Let suppose that the government increases the Entertainment tax rate
from 4% to 8 %, then in the Client-Server case, we have to send an update to each
client and they must update synchronously on a specific time otherwise, we may store
invalid or wrong information.
 The Client-Server Architecture is also a burden to network traffic and resources. Let
us assume that about five hundred clients are working on a data server then we will
have five hundred ODBC connections and several ruffian record sets, which must be
transported from the server to the clients.
 This categorization of the application makes the function more reusable easily and it
becomes too easy to find the functions which have been written previously. If the
programmer wants to make a further update in the application then he easily can
understand the previously written code and can update easily.

Page | 16
DISADVANTAGES
 Increase complexity /effort
 More difficult to build 3 tier architecture rather than a 2 tier.
 Points of communication are doubled
 Maintenance tools are currently inadequate for maintaining server libraries.
7. SOFTWARE PROCESS MODEL
7.1 Why not Evolutionary models?
These models are best suited where requirements are fuzzy. These models are best
suited for the systems where requirements keep on changing. But for our system requirements
are crystal clear so it is not feasible to adopt any of the evolutionary models.
7.2 Why not Waterfall model?
Waterfall model can be adopted because in our case because requirements are known
in advance but there are some limitations of waterfall model due to which it is not feasible to
adopt:
 No parallelism of work.
 Time consuming
7.3 Why Incremental RAD model?
Incremental model is advisable where requirements are clear and the development time
is less. The striking feature of the incremental model is that each module can be completed and
released as and when the requirement arises because of lack of time.
As in our system, many of the modules are not inter-related so can be released in
isolation. The user can thus get a feel of these modules and give his feedback which can be
utilized for making the software more user-friendly and in line with the user requirements.
Not only that the deadline set for this project is 3 months and we need a high
adaptation model and again will be concentrating on parallelism because our team will be
working on the different module at the same time. Moreover, we will be using latest tools such

Page | 17
as Visio, Project Manager as a result of which we can work much faster. So looking into all
these requirements we find Incremental RAD model is best suited for our system because it
enables the development team to create a fully functional system within a very short period of
time.
7.4 Observation
We have observed that our system that is Canteen Automation System would be of
immense help to the client as currently everything is done manually, which results in a lot of
time consumption, is error prone and also increases economic burden in the form of payment
not paid by the customers. Moreover, such a manual system of managing canteen is quite
unstructured. Our system would be efficient, accurate and easy to use.
7.5 Determining Project Feasibility
The feasibility study is not a full-blown systems study. Rather, the feasibility study is
used to gather broad data to make a decision on whether to proceed with system study.
System project feasibility is assessed in three principal ways:
 Economically
 Technically
 Operationally
Economic Feasibility
The organization has evaluated the cost of software and hardware required for the
system including the storage of data. The benefits expected from the system are studied to
assess the reduced cost due to the new system.
Technical Feasibility:
Organization has shown a willingness to purchase all hardware and software tools
which we recommend to successfully implement the system. Hence technically there are no
limitations for the development of the system. Thus the project is technically feasible.
Operational Feasibility:
Operational feasibility is dependent on the humans who will be using the software once
it’s ready and installed for use. The software will have a user-friendly interface which will be
much convenient as compared to the current manual procedure. Thus the project is
operationally feasible

Page | 18
8. DESIGN
8.1 Use Case Diagram
A use case is a description of how end-users will use a software code. It describes a
task or a series of tasks that users will accomplish using the software and includes the responses
of the software to user actions.
Fig 1.1 Use case for Login Page
uc Use Case Model
Login
Customer/Canteen
Owner
Enter ID &
Password
Forget Password
Grant access
Check ID &
Password
Deny Access
Valid User
Admin
«extend»
«include»
«extend»
«include»

Page | 19
Fig. 1.2 Use Case Diagram for Registration

Page | 20
Fig. 1.3 Use case for Order, Payment & Update
uc Use Case Model
Order & Payment
Canteen Owner
Customer
Update Menu
Monitor Canteen
Place Order
Read Order
Make Payment
«include»
«extend»
«extend»

Page | 21
8.2 Class Diagram
In the Unified Modeling Language (UML), a class diagram is a type of static structure
diagram that describes the structure of a system by showing the system's classes, their
attributes, and the relationships between the classes.
Fig. 2.1 Class diagram of Login Page
class Class Model
Login UI
- User id: char
- Password: char
+ Get_id_Password(): boolean
+ Authenticate(): boolean
+ Enter_id_Password(): boolean
Customer/Canteen Owner
- User id : char
- Password : char
+ Enter_id_password(): boolean
Administrator
- Admin_id: char
- Password: char
+ Authenticate(): boolean
+ Get_id_password(): boolean

Page | 22
Fig. 2.2 Class Diagram for Registration

Page | 23
Fig. 2.3 Class diagram of Order and Update
class Class Model
Order UI
- Food items: char
- cold drinks: char
- order_id: int
- Tea and Coffee: char
- Cust_name: char
+ choose_order(): char
+ make_order(): char
+ order_again(): char
+ confirm_order(): char
+ bill(): char
+ update_menu(): char
+ update to_do_list(): char
Customer
- Food items: char
- cold drinks: char
- Tea and Coffee: char
+ choose_order(): char
+ make_order(): char
+ order_again(): char
Canteen manager
- Cust_name: char
- order_id: int
+ confirm_order(): char
+ bill(): char
+ update menu(): char
+ update to_do_list(): char

Page | 24
Fig. 2.4 Class diagram for Payment
class Class Model
Payment UI
- cash: int
- card name: char
- card type: char
- payment id: char
- Payment_id: char
- cust_name: char
- order_id: int
+ select_mode(): char
+ cash_mode(): char
+ pay_cash(): float
+ card_mode(): char
+ card_payment(): int
+ fee_mode(): char
+ card_error(): boolean
+ print_receipt(): char
+ changes(): int
+ select_fee_mode(): char
+ proceed_payment(): float
Customer
- cash: int
- card name: char
- card type: char
- payment id: char
+ select_mode(): char
+ cash_mode(): char
+ pay_cash(): float
+ card_mode(): char
+ card_payment(): int
+ fee_mode(): char
+ card_error(): boolean
Canteen manager
- Payment_id: char
- cust_name: char
- order_id: int
+ print_receipt(): char
+ changes(): int
+ select_fee_mode(): char
+ proceed_payment(): float

Page | 25
8.3 Sequence Diagram:
A sequence diagram in Unified Modeling Language (UML) is a kind of interaction
diagram that shows how processes operate with one another and in what order. It is a construct
of a Message Sequence Chart. Sequence diagrams are sometimes called event diagrams, event
scenarios, and timing diagrams.
Fig. 3.1 Sequence of Login

Page | 26
Fig. 3.2 Sequence Diagram for Registration
sd Use Case Model
Canteen Owner/Customer
REGISTRATION
UI
LOGIN UI
Get_Details()
Boolean
Set_Details()
Boolean
Registration_Confrim()
Login()
Boolean

Page | 27
Fig. 3.3 Sequence diagram for payment
sd Use Case Model
Customer
Make paymentCash Payment Change & receipt Debit/Credit card
payment
Generate Receipt Payment with Fee
Select_Mode()
Cash_Mode()
Pay_Cash()
Changes() Card_Mode()
Card_Payment()
Card_error()
Fee_Mode()
Select_Fee_Mode()
Print_Reciept()
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean

Page | 28
Fig. 3.4 Sequence diagram of placing order
Fig. 3.5 Sequence Diagram for Updating Menu
sd Use Case Model
Customer
Login Selection from
menu
Order confrimation
Enter_id_password()
choose_order()
Make_order()
Order_again()
Bill()
Boolean
Boolean
Boolean
Boolean
sd Use Case Model
Canteen Owner
Menu To Do List
Update_Menu()
Boolean
Update_todolist()
Boolean

Page | 29
8.4 ER DIAGRAM
An entity-relationship (ER) diagram is a specialized graphic that illustrates the
interrelationships between entities in a database. ER diagrams often use symbols to
represent three different types of information. Boxes are commonly used to represent
entities. Diamonds are normally used to represent relationships and ovals are used to
represent attributes.
• Represent Data Entity.
 Represent connection Administrator
• Represent the relationship.
Symbols used in Entity-Relationship Diagram are as follows:
 Connect two Entities or One to One
relation.

Page | 30
Fig. 4.1
erd Takes
Canteen Owner
Customer
Bill
Order
Item
Name
Contact
no
Id no
Takes
Order no
No. of
item
Places
Contains
Item Id
Description
Quantity
Price
Name
Address
Contact
No
Cust ID
Pays
Order
Detail
Bill No
Paid To

Page | 31
8.5 DATA FLOW DIAGRAM
Level-0 DFD
Fig. 5.1
Admin Verification of College
Maintaining
Canteen
Canteen Owner
Canteen
Automation
Canteen
Automation
I/P
I/P O/P
O/P
Placing OrderCustomer Canteen
Automation
I/P O/P

Page | 32
LEVEL 1 DFD
Fig. 5.2
Accepted
/Rejected
Placing
Order
Make
payment
Customer Menu
1
Menu
Registration
Form
Customer
VerifyVerify Verify
Order
Placed
Payment
Done
Feedback
Display Display
Customer
Customer Customer
Customer Info
Existing User
Quit
New User
Feedback
OKOKOK
CustomerCustomer
Customer
I/P

Page | 33
Verifying
Institute
Removing
Institute
Admin Menu
Verify
Verify
College
Verified College
Removed
Display Display
Institute
Institute
OK
OK
Institute
Institute
I/P
Accepted
/Rejected
Maintaining
Accounts Update
Menu
Canteen
Owner Menu
1
Menu
2
Registration
Form
Institute
Verify
Verify
Verify
Account
Managed
Manage
Menu
Updated
List
Updated
Display Display
Institute
Menu Menu
Institute Info
Existing Institute
Quit
New Institute
Update to
Do List
OKOKOK
Menu
Institute
Menu
I/P

Page | 34
9. DATABASE TABLES
Some abbreviations listed below -
 PK – Primary Key
 FK – Foreign Key
 NN – Not Null (Required)
 UC – Unique Constraint
 SLT – Single Line of Text
 MLT – Multiple Lines of Text
 PG – Person or Group
 Yes/No (check box) – Yes/No
9.1 CUSTOMER
Table Name Customer
Description This table will contain the personal information of the customer who
places an order in the canteen.
Primary Keys Cust_Id
Field Name Data type Constraints Comments
Cust_Id Int PK
FirstName varchar(50) NN
LastName varchar(50) NN
EmailId varchar(50) NN
UserName varchar(50) NN
Password varchar(25) Must contain 8 character
Mobile No. varchar(10) It could be home or cell, should
take more than one and allow
numbers + text like Home-408-
888-3333, cell-408-888-9999
Address varchar(100)
City varchar(20)
State varchar(20)
Country varchar(50)
Zipcode varchar(8)
Table 1.1

Page | 35
9.2 ADMIN
Table Name Admin
Description This table will contain the personal information of the admin that verify
the college registration.
Primary Keys Admin_Id
Foreign Keys College_Id
Admin_Id Int PK
College_Id Int FK
Mobile No. varchar(10) It could be home or cell
City varchar(20)
State varchar(20)
Country varchar(50)
Zipcode varchar(8)
Table 1.2
9.3 CANTEEN OWNER
Table Name Canteen Owner
Description This table will contain the personal information of the canteen owner.
Primary Keys College_Id
Foreign Keys Cust_Id,Order_Id,Item_No
College_Id Int PK
Cust_Id Int FK
Order_Id Int FK
Item_Id Int FK
Mobile No. varchar(10) It could be home or cell
City varchar(20)
State varchar(20)
Country varchar(50)
Zipcode varchar(8)
Table 1.3

Page | 36
9.4 MENU
Table 1.4
9.5 ORDER
Table 1.5
9.6 PAYMENT
Table 1.6
Table Name Menu
Description This table will contain all the details of the menu card.
Primary Keys Item_Id
Foreign Keys College_Id,Cust_Id,Order_Id
Item_Id Int PK
College_Id Int FK
Order_Id Int FK
Item_Id Int FK
Cust_Id Int FK
ItemName varchar(50) NN
Quantity Int NN
Table Name Order
Description This table will contain the details of Order that customer does.
Primary Keys Order_Id
Foreign Keys College_Id,Cust_Id,Bill_Id,Item_Id
Order_Id Int PK
Item_Id Int FK
College_Id Int FK
Bill_Id Int FK
Item_Id Int FK
Cust_Id Int FK
Table Name Payment
Description This table will contain the details of payment done by the customer.
Primary Keys Bill_Id
Foreign Keys College_Id,Cust_Id,Order_Id,Item_Id
Bill_Id Int PK
College_Id Int FK
Order_Id Int FK
Item_Id Int FK
Cust_Id Int FK
Payment_mode varchar(50) NN
Amount Int NN
Credit/Debit_card_no Int NN

Page | 37
BIBLIOGRAPHY
BOOK REFERENCE
1.) Lynn Beighley & Michael Morrison (2008). Head First PHP & MySQL
2.) Robin Nixon (2010). Learning PHP, MySQL, JavaScript & CSS
3.) Ian Sommerville (2010). Software Engineering
WEBSITE REFERENCE
www.google.com
www.tutorialpoint.com
www.w3schools.com

Canteen automation system (updated) revised

Recommended

More Related Content

What's hot (20)

Similar to Canteen automation system (updated) revised (20)

Recently uploaded (20)

Canteen automation system (updated) revised