Case ih quadtrac 580 tier 4 b (final) tractor service repair manual pin jeez00000ff314001 and above

Printed in U.S.A.
© 2017 CNH Industrial America LLC. All Rights Reserved.
Case IH is a trademark registered in the United States and many
other countries, owned by or licensed to CNH Industrial N.V.,
its subsidiaries or affiliates.
Part number 48193194
1st
edition English
October 2017
SERVICE MANUAL
Rowtrac™
420 / 470 / 500
Steiger®
370 / 420 / 470 / 500 / 540 / 580 / 620
Quadtrac®
470 / 500 / 540 / 580 / 620
Tier 4B (final)
Tractor
PIN JEEZ00000FF314001 and above

SERVICE MANUAL
Steiger® 370 CVT, TIER 4B [JEEZ00000FF314001 - ], Steiger® 370
Powershift, TIER 4B [JEEZ00000FF314001 - ], Steiger® 420 CVT,
TIER 4B [JEEZ00000FF314001 - ], Steiger® 420 Powershift, TIER
4B [JEEZ00000FF314001 - ], Steiger® 420 Rowtrac™ CVT, TIER 4B
[JEEZ00000FF314001 - ], Steiger® 420 Rowtrac™ Powershift, TIER 4B
[JEEZ00000FF314001 - ], Steiger® 470 CVT, TIER 4B [JEEZ00000FF314001 -
], Steiger® 470 CVT, scraper, TIER 4B [JEEZ00000FF314001 - ], Steiger®
470 Powershift, TIER 4B [JEEZ00000FF314001 - ], Steiger® 470 Powershift,
scraper, TIER 4B [JEEZ00000FF314001 - ], Steiger® 470 Quadtrac® CVT,
TIER 4B [JEEZ00000FF314001 - ], Steiger® 470 Quadtrac® Powershift,
TIER 4B [JEEZ00000FF314001 - ], Steiger® 470 Rowtrac™ CVT, TIER 4B
TIER 4B [JEEZ00000FF314001 - ], Steiger® 500 Quadtrac® CVT, scraper,
scraper, TIER 4B [JEEZ00000FF314001 - ], Steiger® 500 Rowtrac™ CVT, TIER
4B [JEEZ00000FF314001 - ], Steiger® 500 Rowtrac™ Powershift, TIER 4B
scraper, TIER 4B [JEEZ00000FF314001 - ], Steiger® 580 Powershift,
TIER 4B [JEEZ00000FF314001 - ], Steiger® 580 Powershift, scraper,
scraper, TIER 4B [JEEZ00000FF314001 - ], Steiger® 620 Powershift, TIER
4B [JEEZ00000FF314001 - ], Steiger® 620 Powershift, scraper, TIER 4B
48193194 12/10/2017
EN

[JEEZ00000FF314001 - ], Steiger® 620 Quadtrac® Powershift, TIER 4B
[JEEZ00000FF314001 - ]
48193194 12/10/2017
EN

Link Product / Engine
Product Market Product Engine
Steiger® 370 Powershift, TIER 4B
[JEEZ00000FF314001 - ]
North America F2CFE614A*B
Steiger® 370 CVT, TIER 4B
[JEEZ00000FF314001 - ]
North America F2CFE614A*B
[JEEZ00000FF314001 - ]
North America F3HFE613G*B001
[JEEZ00000FF314001 - ]
Steiger® 420 Rowtrac™
Powershift, TIER 4B
[JEEZ00000FF314001 - ]
Steiger® 420 Rowtrac™ CVT,
TIER 4B [JEEZ00000FF314001 - ]
[JEEZ00000FF314001 - ]
North America F3HFE613D*B001
Steiger® 470 Powershift, scraper,
TIER 4B [JEEZ00000FF314001 - ]
[JEEZ00000FF314001 - ]
Steiger® 470 CVT, scraper, TIER
4B [JEEZ00000FF314001 - ]
Steiger® 470 Quadtrac®
Powershift, TIER 4B
[JEEZ00000FF314001 - ]
Steiger® 470 Quadtrac® CVT,
TIER 4B [JEEZ00000FF314001 - ]
Powershift, TIER 4B
[JEEZ00000FF314001 - ]
TIER 4B [JEEZ00000FF314001 - ]
[JEEZ00000FF314001 - ]
North America F3HFE613B*B001
TIER 4B [JEEZ00000FF314001 - ]
[JEEZ00000FF314001 - ]
4B [JEEZ00000FF314001 - ]
Powershift, TIER 4B
[JEEZ00000FF314001 - ]
Powershift, scraper, TIER 4B
[JEEZ00000FF314001 - ]
TIER 4B [JEEZ00000FF314001 - ]
48193194 12/10/2017

Product Market Product Engine
CVT, scraper, TIER 4B
[JEEZ00000FF314001 - ]
Powershift, TIER 4B
[JEEZ00000FF314001 - ]
TIER 4B [JEEZ00000FF314001 - ]
[JEEZ00000FF314001 - ]
North America F3DFE613J*B001
TIER 4B [JEEZ00000FF314001 - ]
[JEEZ00000FF314001 - ]
4B [JEEZ00000FF314001 - ]
Powershift, TIER 4B
[JEEZ00000FF314001 - ]
[JEEZ00000FF314001 - ]
TIER 4B [JEEZ00000FF314001 - ]
CVT, scraper, TIER 4B
[JEEZ00000FF314001 - ]
[JEEZ00000FF314001 - ]
North America F3DFE613G*B001
TIER 4B [JEEZ00000FF314001 - ]
Powershift, TIER 4B
[JEEZ00000FF314001 - ]
[JEEZ00000FF314001 - ]
[JEEZ00000FF314001 - ]
North America F3DFE613F*B001
TIER 4B [JEEZ00000FF314001 - ]
Powershift, TIER 4B
[JEEZ00000FF314001 - ]
48193194 12/10/2017

Contents
INTRODUCTION
Engine....................................................................................... 10
[10.001] Engine and crankcase ............................................................. 10.1
[10.216] Fuel tanks .......................................................................... 10.2
[10.202] Air cleaners and lines .............................................................. 10.3
[10.500] Selective Catalytic Reduction (SCR) exhaust treatment ........................... 10.4
[10.400] Engine cooling system ............................................................. 10.5
[10.414] Fan and drive ...................................................................... 10.6
[10.310] Aftercooler.......................................................................... 10.7
Power coupling........................................................................... 19
[19.100] Drive shaft.......................................................................... 19.1
[19.110] Flywheel damper ................................................................... 19.2
Transmission.............................................................................. 21
[21.113] Powershift transmission ............................................................ 21.1
[21.135] Powershift transmission external controls.......................................... 21.2
[21.155] Powershift transmission internal components...................................... 21.3
[21.504] Continuously Variable Transmission (CVT) ........................................ 21.4
[21.505] Continuously Variable Transmission (CVT) external controls...................... 21.5
[21.506] Continuously Variable Transmission (CVT) hydraulic components ................ 21.6
[21.507] Continuously Variable Transmission (CVT) internal components.................. 21.7
Front axle system ....................................................................... 25
[25.100] Powered front axle ................................................................. 25.1
[25.102] Front bevel gear set and differential ............................................... 25.2
[25.310] Final drives ......................................................................... 25.3
[25.500] Front axle track yoke assembly .................................................... 25.4
Rear axle system........................................................................ 27
48193194 12/10/2017

[27.100] Powered rear axle.................................................................. 27.1
[27.106] Rear bevel gear set and differential................................................ 27.2
[27.120] Planetary and final drives .......................................................... 27.3
[27.610] Rear axle track yoke assembly .................................................... 27.4
Power Take-Off (PTO)................................................................. 31
[31.104] Rear electro-hydraulic control...................................................... 31.1
[31.110] One-speed rear Power Take-Off (PTO) ............................................ 31.2
[31.220] Gearbox ............................................................................ 31.3
Brakes and controls .................................................................... 33
[33.202] Hydraulic service brakes ........................................................... 33.1
[33.110] Parking brake or parking lock ...................................................... 33.2
Hydraulic systems....................................................................... 35
[35.000] Hydraulic systems.................................................................. 35.1
[35.300] Reservoir, cooler, and filters........................................................ 35.2
[35.106] Variable displacement pump ....................................................... 35.3
[35.102] Pump control valves................................................................ 35.4
[35.105] Charge pump....................................................................... 35.5
[35.304] Combination pump units ........................................................... 35.6
[35.204] Remote control valves ............................................................. 35.7
[35.600] High flow hydraulics................................................................ 35.8
Hitches, drawbars, and implement couplings.................................. 37
[37.100] Drawbars and towing hitches ...................................................... 37.1
Frames and ballasting ................................................................. 39
[39.100] Frame .............................................................................. 39.1
Steering..................................................................................... 41
[41.101] Steering control .................................................................... 41.1
[41.200] Hydraulic control components...................................................... 41.2
[41.206] Pump ............................................................................... 41.3
48193194 12/10/2017

Wheels...................................................................................... 44
[44.511] Front wheels........................................................................ 44.1
[44.520] Rear wheels........................................................................ 44.2
Tracks and track suspension........................................................ 48
[48.130] Track frame and driving wheels .................................................... 48.1
[48.100] Tracks .............................................................................. 48.2
[48.134] Track tension units ................................................................. 48.3
[48.138] Track rollers ........................................................................ 48.4
Cab climate control ..................................................................... 50
[50.104] Ventilation .......................................................................... 50.1
[50.200] Air conditioning..................................................................... 50.2
[50.300] Cab pressurizing system ........................................................... 50.3
Electrical systems....................................................................... 55
[55.000] Electrical system ................................................................... 55.1
[55.100] Harnesses and connectors......................................................... 55.2
[55.640] Electronic modules ................................................................. 55.3
[55.201] Engine starting system ............................................................. 55.4
[55.301] Alternator........................................................................... 55.5
[55.302] Battery.............................................................................. 55.6
[55.010] Fuel injection system............................................................... 55.7
[55.014] Engine intake and exhaust system................................................. 55.8
[55.988] Selective Catalytic Reduction (SCR) electrical system ............................ 55.9
[55.640] Electronic modules ............................................................... 55.10
[55.024] Transmission control system..................................................... 55.11
[55.045] Front axle control system ........................................................ 55.12
[55.046] Rear axle control system......................................................... 55.13
[55.522] Cab Power Take-Off (PTO) controls ............................................. 55.14
[55.048] Rear Power Take-Off (PTO) control system ..................................... 55.15
48193194 12/10/2017

[55.035] Remote control valve electric control ............................................ 55.16
[55.051] Cab Heating, Ventilation, and Air-Conditioning (HVAC) controls................. 55.17
[55.050] Heating, Ventilation, and Air-Conditioning (HVAC) control system............... 55.18
[55.130] Rear three-point hitch electronic control system ................................. 55.19
[55.DTC] FAULT CODES.................................................................. 55.20
Platform, cab, bodywork, and decals............................................. 90
[90.150] Cab................................................................................. 90.1
[90.151] Cab interior......................................................................... 90.2
[90.124] Pneumatically-adjusted operator seat.............................................. 90.3
[90.100] Engine hood and panels ........................................................... 90.4
[90.102] Engine shields, hood latches, and trims ........................................... 90.5
48193194 12/10/2017

INTRODUCTION
48193194 12/10/2017
1

INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your CASE IH Sales and Service Networks.
48193194 12/10/2017
3

INTRODUCTION
Safety rules - Personal safety
General safety rules
Use caution when operating the machine on slopes. Raised equipment, full tanks and other loads will change the
center of gravity of the machine. The machine can tip or roll over when near ditches and embankments or uneven
surfaces.
Stay off slopes too steep for safe operation. Shift down before you start up or down a hill with a heavy load. Avoid
“free wheeling.”
Never permit anyone other than the operator to ride on the machine.
Never operate the machine under the influence of alcohol, drugs, or while otherwise impaired.
While driving on the road, the seat swivel position must always be straight forward and locked in position with no
rotation. The seat swivel should only be rotated for in field operation.
Do not drive on roads, or at high speed anywhere, with the differential lock engaged. Difficult steering will occur, and
can result in an accident. In field operation, use the differential lock for traction improvement, but release for turning
at row ends.
Do not exceed implement transport speed or the speed rating on the implement tires. Review the implements Oper-
ator’s Manual for specifications. Failure to comply could result in death or serious injury.
For speeds up to 16 km/h (10 mph), make sure that the weight of a trailed vehicle that is not equipped with brakes
does NOT EXCEED 1.5 times the Tractor weight. For speeds up to 40 km/h (25 mph), make sure that the weight of
the trailed vehicle that is not equipped with brakes, does NOT EXCEED the weight of the Tractor. Stopping distance
increases with increasing speed as the weight of the towed load increases, especially on hills and slopes.
Rear upset can result if pulling from wrong location on tractor. Hitch only to the drawbar. Use three-point hitch only
with the implements designed for its use – not as a drawbar.
Modifications made to this machine may increase the likelihood or potential for debris accumulations that would nor-
mally not be present. Modifications include frame-mounted attachments, plates, screens, or other aftermarket equip-
ment. Operators of modified machines must be aware of accumulations of organic debris and/or material and overall
machine cleanliness.
Modified machines require additional and more frequent inspection and cleaning during usage. The machine may
require inspection and cleaning multiple times per day during usage. Operators must be aware of the operating
environment and conditions. Operators must take appropriate actions to maintain the machines during use. In
particular, pay attention to the following machine areas:
• In and around the engine compartment
• Hot exhaust components
• Moving, turning, or rotating machine components
Operators that operate the machine in atypical applications and/or conditions must be aware of accumulations of
organic debris and/or material and overall machine cleanliness. Pay particular attention where material accumulations
are possible or may result.
Machines that operate in atypical applications or conditions require additional and more frequent inspection and
cleaning during usage. The machine may require inspection and cleaning multiple times per day during usage.
Operators must be aware of the operating environment and conditions. Operators must take appropriate actions to
maintain the machines during use. In particular, pay attention to the following machine areas:
• In and around the engine compartment
• Hot exhaust components
• Moving, turning, or rotating machine components
Do not look directly into the front or rear work lamps. Eye damage can occur.
48193194 12/10/2017
4

INTRODUCTION
Do not tamper with the ballast on the front or rear High Intensity Discharge (HID) lamp since it uses high voltage.
Personal injury or death can occur.
To avoid possible eye damage from microwave signals emitted by the radar sensor, do not look directly into the sensor
face.
When digging or using ground engaging attachments be aware of buried cables. Contact local utilities to determine
the locations of services.
Pay attention to overhead power lines and hanging obstacles. High voltage lines may require significant clearance
for safety.
Hydraulic oil or diesel fuel leaking under pressure can penetrate the skin, causing serious injury or infection.
• DO NOT use your hand to check for leaks. Use a piece of cardboard or paper.
• Stop engine, remove key and relieve the pressure before connecting or disconnecting fluid lines.
• Make sure all components are in good condition and tighten all connections before starting the engine or pressur-
izing the system.
• If hydraulic fluid or diesel fuel penetrates the skin, seek medical attention immediately.
• Continuous long term contact with hydraulic fluid may cause skin cancer. Avoid long term contact and wash the
skin promptly with soap and water.
Keep clear of moving parts. Loose clothing, jewelry, watches, long hair, and other loose or hanging items can become
entangled in moving parts.
Wear protective equipment when appropriate.
DO NOT attempt to remove material from any part of the machine while it is being operated or components are in
motion.
Make sure all guards and shields are in good condition and properly installed before operating the machine. Never
operate the machine with shields removed. Always close access doors or panels before operating the machine.
Dirty or slippery steps, ladders, walkways, and platforms can cause falls. Make sure these surfaces remain clean and
clear of debris.
A person or pet within the operating area of a machine can be struck or crushed by the machine or its equipment. DO
NOT allow anyone to enter the work area.
Raised equipment and/or loads can fall unexpectedly and crush persons underneath. Never allow anyone to enter
the area underneath raised equipment during operation.
Never operate engine in enclosed spaces as harmful exhaust gases may build up.
Before starting the machine, be sure that all controls are in neutral or park lock position.
Start the engine only from the operator’s seat. If the safety start switch is bypassed, the engine can start with the
transmission in gear. Do not connect or short across terminals on the starter solenoid. Attach jumper cables as
described in the manual. Starting in gear may cause death or serious injury.
Always keep windows, mirrors, all lighting, and Slow Moving Vehicle (SMV) emblem clean to provide the best possible
visibility while operating the machine.
Operate controls only when seated in the operator’s seat, except for those controls expressly intended for use from
other locations.
Before leaving the machine:
1. Park machine on a firm level surface.
2. Put all controls in neutral or park lock position.
3. Engage park brake. Use wheel chocks if required.
4. Lower all hydraulic equipment — Implements, header, etc.
48193194 12/10/2017
5

INTRODUCTION
5. Turn off engine and remove key.
When, due to exceptional circumstances, you would decide to keep the engine running after leaving the operator’s
station, then the following precautions must be followed:
1. Bring the engine to low idle speed.
2. Disengage all drive systems.
3. WARNING
Some components may continue to run down after you disengage drive systems.
Make sure all drive systems are fully disengaged.
Failure to comply could result in death or serious injury.
W0113A
Shift the transmission into park.
4. Apply the parking brake.
48193194 12/10/2017
6

SERVICE MANUAL
Engine
Steiger® 370 CVT, TIER 4B [JEEZ00000FF314001 - ], Steiger® 370
Powershift, TIER 4B [JEEZ00000FF314001 - ], Steiger® 420 CVT,
TIER 4B [JEEZ00000FF314001 - ], Steiger® 420 Powershift, TIER
4B [JEEZ00000FF314001 - ], Steiger® 420 Rowtrac™ CVT, TIER 4B
TIER 4B [JEEZ00000FF314001 - ], Steiger® 470 Rowtrac™ CVT, TIER 4B
scraper, TIER 4B [JEEZ00000FF314001 - ], Steiger® 500 Rowtrac™ CVT, TIER
4B [JEEZ00000FF314001 - ], Steiger® 500 Rowtrac™ Powershift, TIER 4B
scraper, TIER 4B [JEEZ00000FF314001 - ], Steiger® 580 Powershift,
TIER 4B [JEEZ00000FF314001 - ], Steiger® 580 Powershift, scraper,
scraper, TIER 4B [JEEZ00000FF314001 - ], Steiger® 620 Powershift, TIER
48193194 12/10/2017
10

4B [JEEZ00000FF314001 - ], Steiger® 620 Powershift, scraper, TIER 4B
[JEEZ00000FF314001 - ], Steiger® 620 Quadtrac® Powershift, TIER 4B
[JEEZ00000FF314001 - ]
48193194 12/10/2017
10

Engine - Engine and crankcase
Engine - Change fluid - Changing engine oil and filter
NOTE: Reduce to 300 hours or less if CASE IH AKCELA UNITEK NO. 1™ SBL CJ-4 is not used.
Change the engine oil and filter every 600 hours or once
a year or before storage, whichever occurs first. Your
dealer has approved oil and filters. Do not use other
types of oil or filters.
NOTE: For best results change the oil and filter while the
engine is still warm to the touch from operation (not hot).
The tractor must be on a level surface.
Remove the engine side shields.
9L engine
1. Remove the oil pan drain plug and drain the oil from the
engine into a container.
2. After all oil has drained, install new washer 98474302
on drain plug, center washer on plug and install drain
plug. Torque drain plug to 30 N·m (22 lb ft).
3. Clean the area around the filter head and housing on
the left side of the engine. Place a container under the
oil filter and turn the filter housing counterclockwise to
loosen with a 51 mm (2 in) wrench. After all oil has
drained from the filter, remove the housing with filter.
RAIL13TR04406AA 1
4. Install the new filter cartridge and O-ring. Lightly oil new
O-ring.
4. Reinstall the filter assembly onto the tractor. Do not
over tighten or O-ring will leak.
RCPH10FWD928BAM 2
48193194 12/10/2017
10.1 [10.001] / 3

5. Fill with new oil into the engine oil fill (1).
NOTE: Total oil refill capacity will be determined by how
completely the crankcase drains. Do not fill above the high
mark on the dipstick (2) when refilling.
6. Operate the engine for five minutes at 1000 RPM.
Check for oil leaks at the filter base and drain plug.
7. Stop the engine. Wait approximately five minutes for
the oil to return to the oil pan. Check the oil level on the
dipstick (2) and add oil if needed.
RAIL13TR04406AA 3
13L engines
1. Remove the oil pan drain plug and drain the oil from the
engine into a container.
2. After all oil has drained, install new washer 98474302
on drain plug, center washer on plug and install drain
plug. Torque drain plug to 30 N·m (22 lb ft).
3. Place a container under the oil filter on the left side of
the engine. Use a 19 mm (0.75 in) socket to open drain
on bottom of housing. This will allow oil to drain from
the housing. After oil is drained, turn the filter housing
counterclockwise to loosen with a 51 mm (2 in) wrench
and remove the filter housing.
RAIL14TR00085AA 4
4. Install the new filter cartridge and O-ring.
4. Reinstall the filter assembly. Do not over tighten or the
O-ring will leak.
RCPH10FWD928BAM 5
48193194 12/10/2017
10.1 [10.001] / 4

5. Fill with new oil into the engine oil fill (1).
NOTE: Total oil refill capacity will be determined by how
completely the crankcase drains. Do not fill above the high
mark on the dipstick (2) when refilling.
6. Operate the engine for five minutes at 1000 RPM.
Check for oil leaks at the filter base and drain plug.
7. Stop the engine. Wait approximately five minutes for
the oil to return to the oil pan. Check the oil level on the
dipstick (2) and add oil if needed.
RAIL13TR01857AA 6
48193194 12/10/2017
10.1 [10.001] / 5

Engine - Remove - 9L
Steiger® 370 NA
Prior operation:
Remove the hood support, refer to Hood support - Remove - Row crop frame, 9L engine (90.102)for procedure.
1. Disconnect the driveshaft from the engine.
RAIL13TR02967AA 1
2. Label and disconnect the heater hoses from the tubes.
NOTE: Plug and cap all disconnected hoses and tubes.
RAIL13TR02966AA 2
3. Label and disconnect the two hoses for the diesel emis-
sions fluid tank solenoid.
RAIL13TR02969AA 3
48193194 12/10/2017
10.1 [10.001] / 6

4. Loosen the hose clamp (1) at the turbo.
5. Remove the air intake tube (2) from the engine.
RAIL13TR03051AA 4
6. Disconnect the power cable (1) from the starter.
7. Disconnect the wire (2) from the starter.
8. Remove the bolt (3) and disconnect the ground strap
from the engine block.
RAIL13TR02970AA 5
9. Remove the left hand charged air cooler tube.
NOTE: Plug and cap disconnected tubes and ports.
RAIL13TR02978AA 6
48193194 12/10/2017
10.1 [10.001] / 7

10. Disconnect the lower radiator hose at the engine.
RAIL13TR02971AA 7
11. Attach a support strap to the cooling package frame
and the chassis frame as shown to support the cooling
package.
RAIL13TR02973AA 8
12. Remove the right hand charged air cooler tube.
RAIL13TR02972AA 9
48193194 12/10/2017
10.1 [10.001] / 8

13. Remove the clamp (1) securing the upper radiator
tube to the bracket on the engine.
14. Remove the upper radiator tube (2).
RAIL13TR02974AA 10
15. Cut the ties securing the harness and disconnect the
harness.
RAIL13TR02976AA 11
16. Loosen the viscous drive from the shaft.
NOTE: The fan pulley hub is left handed threaded.
RAIL13TR02979AA 12
48193194 12/10/2017
10.1 [10.001] / 9

17. With the help of an assistant remove the fan out the
right hand side of the machine.
RAIL13TR02977AA 13
18. Disconnect the harness lead to the air conditioner high
pressure switch (1) and the clutch activation lead (2) .
RAIL13TR02981AA 14
19. Use a breaker bar to relieve the tension on the serpen-
tine belt and remove the belt from the air conditioner
compressor pulley.
RAIL13TR02987AA 15
48193194 12/10/2017
10.1 [10.001] / 10

20. Support the compressor and remove the four mount-
ing bolts.
RAIL13TR02986AA 16
21. Set the compressor on the right hand front tire and
secure with holding straps as shown.
RAIL13TR02982AA 17
22. Disconnect the power cable (1) from the alternator.
23. Disconnect the exciter wire (2) from the alternator.
RAIL13TR02983AA 18
48193194 12/10/2017
10.1 [10.001] / 11

24. Disconnect the harness (1).
25. Remove the bolt (2) securing the harness to the en-
gine block.
RAIL13TR02985AA 19
26. Unplug the connector (1).
27. Disconnect the main harness (2) from the engine con-
troller.
28. Disconnect the cable (3) from the junction box.
29. Cut the tie (4) securing the harness and cable to-
gether.
30. Move the harness (5) out from behind the junction box
and the engine to stay with the chassis during the
engine removal.
RAIL13TR02988AA 20
31. Remove the nut and bolt (1) securing the cable to the
bracket.
32. Remove the bolts (2) securing the bracket to the en-
gine block.
RAIL13TR02984AA 21
48193194 12/10/2017
10.1 [10.001] / 12

33. Remove the bolt (1) securing the harness to the en-
gine block.
34. Disconnect the fuel inlet hose (2).
NOTE: Plug and cap all disconnected fuel hoses and fit-
tings.
RAIL13TR02993AA 22
35. Disconnect the fuel return hose.
RAIL13TR02991AA 23
36. Remove the right and left hand hold down brackets.
NOTE: Left hand side is shown. Remove both sides.
RAIL13TR02989AA 24
48193194 12/10/2017
10.1 [10.001] / 13

Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.

37. Remove the front hold down bracket.
RAIL13TR02994AA 25
38. Attach the 4130 load rotor lifting bale or equivalent to
overhead crane and engine lift brackets.
NOTE: The engine lifting brackets are for vertical lifting
only. Any lifting device that is not vertically in line with the
lifting brackets can damage the engine rocker arm cover or
cause bracket failure.
RAIL13TR02992AA 26
39. Remove the engine.
RAIL13TR02990AA 27
48193194 12/10/2017
10.1 [10.001] / 14

Engine - Install - 9L
Steiger® 370 NA
1. Set the engine in place on the chassis.
NOTE: The engine lifting brackets are for vertical lifting
only. Any lifting device that is not vertically in line with the
lifting brackets can damage the engine rocker arm cover or
cause bracket failure.
RAIL13TR02990AA 1
2. Remove the 4130 load rotor lifting bale or equivalent
from the engine lift brackets.
RAIL13TR02992AA 2
3. Install the front hold down bracket.
4. Torque the lower engine mount to frame bolts (1) to 90
– 107 N·m (66 – 79 lb ft).
5. Torque the ISO mount nut and bolt to 160 – 220 N·m
(118 – 162 lb ft).
RAIL13TR02994AA 3
48193194 12/10/2017
10.1 [10.001] / 15

6. Install the right and left hand hold down brackets.
NOTE: Left hand side is shown. Install both sides.
7. Torque the bolts to 125 – 150 N·m (92 – 111 lb ft).
RAIL13TR02989AA 4
8. Connect the fuel return hose.
NOTE: Remove the plugs and caps from the disconnected
fuel hoses and fittings.
RAIL13TR02991AA 5
9. Route the harness and secure to the engine block with
the original bolt (1).
10. Connect the fuel inlet hose (2).
RAIL13TR02993AA 6
48193194 12/10/2017
10.1 [10.001] / 16

11. Secure the bracket to the engine block (1) with the
original bolts.
12. Secure the cable to the bracket with the original nut
and bolt (2).
RAIL13TR02984AA 7
13. Route the harness (1) behind the junction box into it’s
original position.
14. Connect the cable (2) to the junction box as shown.
15. Connect the main harness (3) to the engine controller.
16. Plug in the connector (4) as shown.
17. Secure the harness and cable (5) together with a tie.
RAIL13TR02988AA 8
18. Connect the harness (1).
19. Route the harness to the top of the engine and secure
with the original bolt (2).
RAIL13TR02985AA 9
48193194 12/10/2017
10.1 [10.001] / 17

20. Connect the exciter wire (1) to the alternator.
21. Connect the power cable (2) to the alternator.
RAIL13TR02983AA 10
22. Remove the compressor from the right hand front tire
and set in place on the engine.
RAIL13TR02982AA 11
23. Support the compressor, install the four mounting
bolts and tighten.
RAIL13TR02986AA 12
48193194 12/10/2017
10.1 [10.001] / 18

Case ih quadtrac 580 tier 4 b (final) tractor service repair manual pin jeez00000ff314001 and above

More Related Content

More from fujsejfkskefmem (20)

Recently uploaded (20)

Case ih quadtrac 580 tier 4 b (final) tractor service repair manual pin jeez00000ff314001 and above