Abstract image of a woman sitting on books and studying on a laptop

Caterpillar cat 322 c ln 322cln excavator (prefix bgr) service repair manual (bgr00001 and up)

F
fujseskemmesd

The document provides step-by-step instructions for disassembling various components of a 322C excavator's auxiliary control valve, including the solenoid valve and housing, spool, line relief valves, and load hold check valve. Cleanliness is emphasized to prevent contamination of hydraulic systems. Components are to be cleaned before assembly and the system should be cleaned after repairs. Personal protective equipment is recommended when disassembling components with spring forces.

Automotive
1 of 29
Download to read offline
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Service Repair Manual Model 322C and 322C LN 322CLN EXCAVATOR
Shutdown SIS Previous Screen Product: EXCAVATOR Model: 322C EXCAVATOR BGR Configuration: 322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 3126 Engine Disassembly and Assembly 322C Excavator Machine Systems Media Number -RENR3843-07 Publication Date -01/02/2017 Date Updated -20/02/2017 i01974060 Control Valve (Auxiliary) - Disassemble - F2 Auxiliary Control Valve SMCS - 5051-015-AX Disassembly Procedure Start By: a. Remove the F2 auxiliary control valve. Refer to Disassembly and Assembly, "Control Valve (Auxiliary) - Remove" for the machine that is being serviced. NOTICE Keep all parts clean from contaminants. Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components. To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly. Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination. Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will prevent contamination from entering the internal mechanism. 1/8322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Solenoid Valve and Housing Illustration 1 g00713277 1. Remove two bolts (2). Remove valve (1). Illustration 2 g00713314 2. Remove the O-ring seal (3) from the valve housing. Illustration 3 g00713315 3. Remove two bolts (4). Remove solenoid valve (5) from the housing. Remove fitting (6). 2/8322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 4 g00713316 4. Remove O-ring seal (7) from fitting (6). Remove O-ring seal (8), (9), (10), and (11) from solenoid valve (5). Illustration 5 g00713317 5. Remove fitting (12), plug (13), and fitting (14). Illustration 6 g00713318 6. Remove O-ring seal (15) from fitting (12). Remove O-ring seal (16) from fitting (14). Remove O-ring seal (17) from plug (13). 3/8322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 7 g00713319 7. Remove two bolts (18). Remove valve (19). Illustration 8 g00713320 8. Remove O-ring seal (20) from the valve housing. Illustration 9 g00713321 9. Remove two bolts (21). Remove solenoid valve (22) from the housing. Remove fitting (23). 4/8322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 10 g00713322 10. Remove O-ring seal (24), (25), (26), and (27) from solenoid valve (22). Remove O-ring seal (28) from fitting (23). Illustration 11 g00713323 11. Remove fittings (29) and (32). Remove plugs (30) and (31). Illustration 12 g00713324 12. Remove O-ring seal (33) from plug (30). Remove O-ring seal (34) from fitting (29). Remove O-ring seal (35) from plug (31). Remove O-ring seal (36) from fitting (32). 5/8322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Spool, Load Hold Check Valve, and Line Relief Valves Illustration 13 g00713411 1. Remove O-ring seals (37), (38), (39), and (40) from the valve housing. Remove spool (41). Remove line relief valves (42) and (44). Remove load hold check valve (43). Illustration 14 g00713419 Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. 2. Disassemble the load hold check valve. Remove check valve (45), spring (46), and O-ring seal (47) from plug (48). 6/8322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 15 g00713427 3. Remove the O-ring seals and backup rings from line relief valves (42) and (44). Remove O- ring seals (49), (50), (52), (53), and (54). Remove backup rings (51) and (55). Illustration 16 g00713437 Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. 4. Remove bolt (56) and spring (57) from the spool. 7/8322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Sat Sep 28 17:03:22 UTC+0800 2019 8/8322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS Previous Screen Product: EXCAVATOR Model: 322C EXCAVATOR BGR Configuration: 322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 3126 Engine Disassembly and Assembly 322C Excavator Machine Systems Media Number -RENR3843-07 Publication Date -01/02/2017 Date Updated -20/02/2017 i01974067 Control Valve (Auxiliary) - Disassemble - F1 and F3 Auxiliary Control Valve SMCS - 5051-015-AX Disassembly Procedure Start By: a. Remove the auxiliary control valve. Refer to Disassembly and Assembly, "Control Valve (Auxiliary) - Remove" for the machine that is being serviced. NOTICE Keep all parts clean from contaminants. Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components. To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly. Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination. Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will prevent contamination from entering the internal mechanism. 1/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Line Relief Valve and Load Hold Check Valve Illustration 1 g00708853 1. Remove line relief valve (1), fitting (2), and load hold check valve (3). Illustration 2 g00708935 Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. 2/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
2. Disassemble the line relief valve. a. Remove plug (4). b. Remove O-ring seal (5), shims (6), and shim (7) from plug (4). c. Remove spring (8) and valve (9) from valve body (10). d. Remove O-ring seals (11) and (12) from valve body (10). Illustration 3 g00708878 3. Remove O-ring seal (13) from fitting (2). Illustration 4 g00708882 Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. 3/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Disassemble the load hold check valve. Remove check valve (14), spring (5), and O-ring seal (16) from plug (17). Illustration 5 g00708948 5. Remove line relief valve (18). Illustration 6 g00708875 6. Remove O-ring seals (19), (20), (22), (23), and (24) from line relief valve (18). Remove backup rings (21) and (25) from line relief valve (18). 4/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 7 g00708954 7. Remove line relief valve (26), plug (27), and relief valve (28). Illustration 8 g00708962 8. Remove O-ring seals (29), (30), (32), (33), and (34) from line relief valve (26). Remove backup rings (31) and (35) from line relief valve (26). 5/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 9 g00708965 9. Remove O-ring seal (36) from plug (27). Illustration 10 g00708972 Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. 10. Disassemble the relief valve. a. Remove nut (47). Remove adjuster (37). b. Remove O-ring seal (39) from the adjuster (37). c. Remove spring (40) and valve (42) from holder (38). Remove holder (38). d. Remove O-ring seal (41) from holder (38). e. Remove valve seat (53). f. Remove O-ring seal (52) and backup ring (51) from the valve seat (53). g. Remove spring (54). 6/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
h. Remove valve (55) from valve body (48). Remove ring (45), collar (44), and filter (43) from valve (55). i. Remove O-ring seals (46), (50), and (49) from valve body (48). Solenoid Valve and Housing Illustration 11 g00709076 1. Remove two bolts (57). Remove valve (56). Illustration 12 g00709077 2. Remove the O-ring seal (58) from the valve housing. 7/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 13 g00709080 3. Remove two bolts (59). Remove solenoid valve (60) from the housing. Remove fitting (61). Illustration 14 g00709082 4. Remove O-ring seal (62) from fitting (61). Remove O-ring seal (63), (64), (65), and (66) from solenoid valve (60). Illustration 15 g00709083 5. Remove fitting (67), plug (68), and fitting (69). 8/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 16 g00709086 6. Remove O-ring seal (70) from fitting (67). Remove O-ring seal (71) from fitting (69). Remove O-ring seal (72) from plug (68). Illustration 17 g00709089 7. Remove two bolts (73). Remove valve (74). Illustration 18 g00709090 8. Remove O-ring seal (75) from the valve housing. 9/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 19 g00709091 9. Remove two bolts (76). Remove solenoid valve (77) from the housing. Remove fitting (78). Illustration 20 g00709092 10. Remove O-ring seal (79), (80), (81), and (82) from solenoid valve (77). Remove O-ring seal (83) from fitting (78). Illustration 21 g00709093 11. Remove fittings (84) and (87). Remove plugs (85) and (86). 10/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 3... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 22 g00709094 12. Remove O-ring seal (88) from plug (85). Remove O-ring seal (89) from fitting (84). Remove O-ring seal (90) from plug (86). Remove O-ring seal (91) from fitting (87). Spool and Plug Illustration 23 g00709161 1. Remove O-ring seals (92), (93), (94), and (95) from the valve housing. Remove spool (96). Illustration 24 g00709162 11/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 3... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. 2. Remove bolt (97) and spring (98) from the spool. Illustration 25 g00709163 3. Remove plug (99) from the valve housing. Illustration 26 g00709164 4. Remove O-ring seal (100) from plug (99). Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Sat Sep 28 17:04:22 UTC+0800 2019 12/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 3... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS Previous Screen Product: EXCAVATOR Model: 322C EXCAVATOR BGR Configuration: 322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 3126 Engine Disassembly and Assembly 322C Excavator Machine Systems Media Number -RENR3843-07 Publication Date -01/02/2017 Date Updated -20/02/2017 i01973997 Control Valve (Auxiliary) - Assemble - F1 and F3 Auxiliary Control Valve SMCS - 5051-016-AX Assembly Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 1U-6396 O-Ring Assembly Compound B 155-0695 Thread Lock Compound Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. All disassembly and all assembly procedures must be performed on a clean work surface and in a clean hydraulic area. Keep cleaned parts covered and protected at all times. Note: O-ring seals, gaskets, and seals should always be replaced. A used O-ring seal may not have the same sealing properties as a new O-ring. Use Tooling (A) during the assembly procedure. Note: Apply a light film of hydraulic oil to all components before assembly. Spool and Plug 1/12322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1 g00709164 1. Install O-ring seal (100) on plug (99). Illustration 2 g00709163 2. Install plug (99) in the valve housing. Tighten plug (99) to 75 ± 7 N·m (55 ± 5 lb ft). Illustration 3 g00709162 3. Install spring (98). Apply Tooling (B) to bolt (97). Install bolt (97). Tighten bolt (97) to 50 + 10 − 0 N·m (37 + 7 − 0 lb ft). 2/12322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 4 g00709161 4. Install spool (96). Install O-ring seals (92), (93), (94), and (95) in the valve housing. Solenoid Valve and Housing Illustration 5 g00709094 1. Install O-ring seal (88) on plug (85). Install O-ring seal (89) on fitting (84). Install O-ring seal (90) on plug (86). Install O-ring seal (91) on fitting (87). Illustration 6 g00709093 3/12322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL. NO WAITING NOTE: If there is no response to click on the link above, please download the PDF document first and then click on it.
2. Install fittings (84) and (87). Install plugs (85) and (86). Illustration 7 g00709092 3. Install O-ring seal (79), (80), (81), and (82) on solenoid valve (77). Install O-ring seal (83) on fitting (78). Illustration 8 g00709091 4. Install fitting (78). Install solenoid valve (77) in the housing. Install two bolts (76). Illustration 9 g00709090 5. Install O-ring seal (75) in the valve housing. 4/12322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 10 g00709089 6. Install valve (74). Install two bolts (73). Illustration 11 g00709086 7. Install O-ring seal (70) on fitting (67). Install O-ring seal (71) on fitting (69). Install O-ring seal (72) on plug (68). Illustration 12 g00709083 8. Install fitting (67), plug (68), and fitting (69). 5/12322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 13 g00709082 9. Install O-ring seal (62) on fitting (61). Install O-ring seal (63), (64), (65), and (66) on solenoid valve (60). Illustration 14 g00709080 10. Install fitting (61). Install solenoid valve (60) in the housing. Install two bolts (59). Illustration 15 g00709077 11. Install the O-ring seal (58) in the valve housing. 6/12322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 16 g00709076 12. Install valve (56). Install two bolts (57). Line Relief Valve and Load Hold Check Valve Illustration 17 g00708972 1. Assemble the relief valve. a. Install O-ring seals (49), (50), and (46) on valve body (48). b. Install filter (43), collar (44), and ring (45) in valve (55). c. Install valve (55) in valve body (48). d. Tighten valve (55) to 135 ± 10 N·m (100 ± 7 lb ft). e. Install O-ring seal (52) and backup ring (51) on valve seat (53). Install spring (54). f. Install valve seat (53). Install O-ring seal (41) on holder (38). Install holder (38). 7/12322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

More Related Content

PDF
Caterpillar cat 322 c ln 322cln excavator (prefix bgr) service repair manual ...
uujjfjkkkdmme
 
PDF
Caterpillar cat 322 c excavator (prefix blp) service repair manual (blp00001 ...
yhfhjjkdksmme
 
PDF
Caterpillar cat 446 d backhoe loader (prefix dbl) service repair manual (dbl0...
ufuusefjjsekkm
 
PDF
Caterpillar cat 262 c skid steer loader (prefix mst) service repair manual (m...
ufjjsekkemmd
 
PDF
Caterpillar cat m313 c wheeled excavator (prefix bdr) service repair manual (...
udfjjdjkskkemmd
 
PDF
Caterpillar cat 232 skid steer loader (prefix cab) service repair manual (cab...
ufjjskekkmde
 
PDF
Caterpillar cat m313 c wheeled excavator (prefix h2a) service repair manual (...
udfjjdjkskkemmd
 
PDF
Caterpillar cat m315 c wheeled excavator (prefix h2b) service repair manual (...
hhjsekmdmm
 
Caterpillar cat 322 c ln 322cln excavator (prefix bgr) service repair manual ...
uujjfjkkkdmme
 
Caterpillar cat 322 c excavator (prefix blp) service repair manual (blp00001 ...
yhfhjjkdksmme
 
Caterpillar cat 446 d backhoe loader (prefix dbl) service repair manual (dbl0...
ufuusefjjsekkm
 
Caterpillar cat 262 c skid steer loader (prefix mst) service repair manual (m...
ufjjsekkemmd
 
Caterpillar cat m313 c wheeled excavator (prefix bdr) service repair manual (...
udfjjdjkskkemmd
 
Caterpillar cat 232 skid steer loader (prefix cab) service repair manual (cab...
ufjjskekkmde
 
Caterpillar cat m313 c wheeled excavator (prefix h2a) service repair manual (...
udfjjdjkskkemmd
 
Caterpillar cat m315 c wheeled excavator (prefix h2b) service repair manual (...
hhjsekmdmm
 

Similar to Caterpillar cat 322 c ln 322cln excavator (prefix bgr) service repair manual (bgr00001 and up) (20)

PDF
Caterpillar cat 322 c ln 322cln excavator (prefix bgr) service repair manual ...
fujsefkskemm
 
PDF
Caterpillar Cat 322C EXCAVATOR (Prefix BGR) Service Repair Manual (BGR00001 a...
jfkksemmdmd
 
PDF
Caterpillar Cat 322C LN 322CLN EXCAVATOR (Prefix BGR) Service Repair Manual (...
jfkksemmdmd
 
PDF
Caterpillar Cat 322C EXCAVATOR (Prefix BGR) Service Repair Manual Instant Dow...
udjkskdmmd
 
PDF
Caterpillar Cat 322C LN EXCAVATOR (Prefix BGR) Service Repair Manual Instant ...
udjkskdmmd
 
PDF
Caterpillar Cat 322CLN EXCAVATOR (Prefix BGR) Service Repair Manual Instant D...
udjkskdmmd
 
PDF
Caterpillar Cat 322C and 322C LN 322CLN EXCAVATOR (Prefix BGR) Service Repair...
yan77xunhao
 
PDF
Caterpillar cat 322 c excavator (prefix blp) service repair manual (blp00001 ...
uudfjjjskkemmd
 
PDF
Caterpillar cat 322 c excavator (prefix blp) service repair manual (blp00001 ...
fujsjefkksekmme
 
PDF
Caterpillar cat 322 c excavator (prefix blp) service repair manual (blp00001 ...
ujjfdjkjskkmdm
 
PDF
Caterpillar cat 322 c l 322cl excavator (prefix blp) service repair manual (b...
yhfhjjkdksmme
 
PDF
Caterpillar cat 322 c l 322cl excavator (prefix blp) service repair manual (b...
uujjfjjkskmme
 
PDF
Caterpillar cat 322 c excavator (prefix blp) service repair manual (blp00001 ...
fujsfskekem
 
PDF
Caterpillar cat 322 c l 322cl excavator (prefix blp) service repair manual (b...
fujsefjfkksekem
 
PDF
Caterpillar cat 322 c l 322cl excavator (prefix blp) service repair manual (b...
fujsjefskekmm
 
PDF
Caterpillar cat 322 c l 322cl excavator (prefix blp) service repair manual (b...
fujsekksmem
 
PDF
Caterpillar cat 322 c excavator (prefix blp) service repair manual (blp00001 ...
fujsekfksmemer
 
PDF
Caterpillar Cat 322C L 322CL EXCAVATOR (Prefix BLP) Service Repair Manual (BL...
jfkksemmdmd
 
PDF
Caterpillar Cat 322C EXCAVATOR (Prefix BLP) Service Repair Manual (BLP00001 a...
jfkksemmdmd
 
PDF
Caterpillar Cat 322CL EXCAVATOR (Prefix BLP) Service Repair Manual Instant Do...
udjkskdmmd
 
Caterpillar cat 322 c ln 322cln excavator (prefix bgr) service repair manual ...
fujsefkskemm
 
Caterpillar Cat 322C EXCAVATOR (Prefix BGR) Service Repair Manual (BGR00001 a...
jfkksemmdmd
 
Caterpillar Cat 322C LN 322CLN EXCAVATOR (Prefix BGR) Service Repair Manual (...
jfkksemmdmd
 
Caterpillar Cat 322C EXCAVATOR (Prefix BGR) Service Repair Manual Instant Dow...
udjkskdmmd
 
Caterpillar Cat 322C LN EXCAVATOR (Prefix BGR) Service Repair Manual Instant ...
udjkskdmmd
 
Caterpillar Cat 322CLN EXCAVATOR (Prefix BGR) Service Repair Manual Instant D...
udjkskdmmd
 
Caterpillar Cat 322C and 322C LN 322CLN EXCAVATOR (Prefix BGR) Service Repair...
yan77xunhao
 
Caterpillar cat 322 c excavator (prefix blp) service repair manual (blp00001 ...
uudfjjjskkemmd
 
Caterpillar cat 322 c excavator (prefix blp) service repair manual (blp00001 ...
fujsjefkksekmme
 
Caterpillar cat 322 c excavator (prefix blp) service repair manual (blp00001 ...
ujjfdjkjskkmdm
 
Caterpillar cat 322 c l 322cl excavator (prefix blp) service repair manual (b...
yhfhjjkdksmme
 
Caterpillar cat 322 c l 322cl excavator (prefix blp) service repair manual (b...
uujjfjjkskmme
 
Caterpillar cat 322 c excavator (prefix blp) service repair manual (blp00001 ...
fujsfskekem
 
Caterpillar cat 322 c l 322cl excavator (prefix blp) service repair manual (b...
fujsefjfkksekem
 
Caterpillar cat 322 c l 322cl excavator (prefix blp) service repair manual (b...
fujsjefskekmm
 
Caterpillar cat 322 c l 322cl excavator (prefix blp) service repair manual (b...
fujsekksmem
 
Caterpillar cat 322 c excavator (prefix blp) service repair manual (blp00001 ...
fujsekfksmemer
 
Caterpillar Cat 322C L 322CL EXCAVATOR (Prefix BLP) Service Repair Manual (BL...
jfkksemmdmd
 
Caterpillar Cat 322C EXCAVATOR (Prefix BLP) Service Repair Manual (BLP00001 a...
jfkksemmdmd
 
Caterpillar Cat 322CL EXCAVATOR (Prefix BLP) Service Repair Manual Instant Do...
udjkskdmmd
 
Ad

More from fujseskemmesd (20)

PDF
Caterpillar cat 951 c track loader (prefix 69h) service repair manual (69h036...
fujseskemmesd
 
PDF
New holland l223 tier 4 skid steer loader service repair manual [ndm474381 ]
fujseskemmesd
 
PDF
Caterpillar cat 428 d backhoe loader (prefix bxc) service repair manual (bxc0...
fujseskemmesd
 
PDF
Caterpillar cat 428 d backhoe loader (prefix bns) service repair manual (bns0...
fujseskemmesd
 
PDF
Caterpillar cat 428 d backhoe loader (prefix bns) service repair manual (bns0...
fujseskemmesd
 
PDF
Caterpillar cat 428 d backhoe loader (prefix bnb) service repair manual (bnb0...
fujseskemmesd
 
PDF
New holland cx5080 elevation combine harvesters service repair manual
fujseskemmesd
 
PDF
Caterpillar cat 428 d backhoe loader (prefix bnb) service repair manual (bnb0...
fujseskemmesd
 
PDF
Caterpillar cat 428 d backhoe loader (prefix bmt) service repair manual (bmt0...
fujseskemmesd
 
PDF
Caterpillar cat 428 d backhoe loader (prefix bmt) service repair manual (bmt0...
fujseskemmesd
 
PDF
Caterpillar cat 428 d backhoe loader (prefix bll) service repair manual (bll0...
fujseskemmesd
 
PDF
New holland cx880 combine harvesters service repair manual
fujseskemmesd
 
PDF
New holland cx6.90 fpt cursor 9 stage iv combine harvester service repair manual
fujseskemmesd
 
PDF
Caterpillar cat 322 c excavator (prefix fed) service repair manual (fed00001 ...
fujseskemmesd
 
PDF
New holland cr980 combine harvesters service repair manual
fujseskemmesd
 
PDF
Caterpillar cat 322 c excavator (prefix bgr) service repair manual (bgr00001 ...
fujseskemmesd
 
PDF
New holland c238 tier 4 compact track loader service repair manual [ncm425510...
fujseskemmesd
 
PDF
Caterpillar cat 320 c ln 320cln excavator (prefix bcn) service repair manual ...
fujseskemmesd
 
PDF
Caterpillar cat 320 c l excavator (prefix amc) service repair manual (amc0000...
fujseskemmesd
 
PDF
Case ih stx425 steiger tractor service repair manual pin jee0102001 and after
fujseskemmesd
 
Caterpillar cat 951 c track loader (prefix 69h) service repair manual (69h036...
fujseskemmesd
 
New holland l223 tier 4 skid steer loader service repair manual [ndm474381 ]
fujseskemmesd
 
Caterpillar cat 428 d backhoe loader (prefix bxc) service repair manual (bxc0...
fujseskemmesd
 
Caterpillar cat 428 d backhoe loader (prefix bns) service repair manual (bns0...
fujseskemmesd
 
Caterpillar cat 428 d backhoe loader (prefix bns) service repair manual (bns0...
fujseskemmesd
 
Caterpillar cat 428 d backhoe loader (prefix bnb) service repair manual (bnb0...
fujseskemmesd
 
New holland cx5080 elevation combine harvesters service repair manual
fujseskemmesd
 
Caterpillar cat 428 d backhoe loader (prefix bnb) service repair manual (bnb0...
fujseskemmesd
 
Caterpillar cat 428 d backhoe loader (prefix bmt) service repair manual (bmt0...
fujseskemmesd
 
Caterpillar cat 428 d backhoe loader (prefix bmt) service repair manual (bmt0...
fujseskemmesd
 
Caterpillar cat 428 d backhoe loader (prefix bll) service repair manual (bll0...
fujseskemmesd
 
New holland cx880 combine harvesters service repair manual
fujseskemmesd
 
New holland cx6.90 fpt cursor 9 stage iv combine harvester service repair manual
fujseskemmesd
 
Caterpillar cat 322 c excavator (prefix fed) service repair manual (fed00001 ...
fujseskemmesd
 
New holland cr980 combine harvesters service repair manual
fujseskemmesd
 
Caterpillar cat 322 c excavator (prefix bgr) service repair manual (bgr00001 ...
fujseskemmesd
 
New holland c238 tier 4 compact track loader service repair manual [ncm425510...
fujseskemmesd
 
Caterpillar cat 320 c ln 320cln excavator (prefix bcn) service repair manual ...
fujseskemmesd
 
Caterpillar cat 320 c l excavator (prefix amc) service repair manual (amc0000...
fujseskemmesd
 
Case ih stx425 steiger tractor service repair manual pin jee0102001 and after
fujseskemmesd
 
Ad

Recently uploaded (20)

PDF
Articulated Dump Truck John Deere 370E 410E 460E Technical Manual.pdf
Service Repair Manual
 
PDF
Smart_Doors_Trunk_Control_Presentation.pdf
XEEDO
 
PPTX
APQP FOR AUTOMOTIVE AND PPAP FOR SUPPLIER
PrabhakarBhuvana
 
PDF
Bobcat t40140 telescopic handler service repair manual sn b33 j11001 and abov...
Service Repair Manual
 
PDF
Transmission John Deere 370E 410E 460E Technical Manual.pdf
Service Repair Manual
 
PDF
Why Has Vertical Farming Recently Become More Economical.pdf.pdf
Skyfield Agritech
 
PDF
Dongguan Sunnew ESS Profile for the year of 2023
galangarrafah1
 
PPT
industrialsafetyhazards-180118095222.ppt
gmoudgil1
 
DOC
Bài tập bổ trợ I-learn Smart World 9 HK1 Unit 4 (HS) (1).doc
XunHuyn12
 
PDF
CASE CX45B Series 2 Mini Excavator Service Repair Manual Instant Download.pdf
zhongxiaqielan90
 
PDF
Lightweight-and-quantum-resistant-authentication-for-the-Internet-of-Drones-I...
peran1805
 
PDF
Deutz D6D EBE2 Volvo EC160BLC Excavator Service Repair Manual.pdf
Service Repair Manual
 
PDF
Volvo EC160B LC EC160BLC Excavator Service Repair Manual Instant Download.pdf
Service Repair Manual
 
PDF
Volvo Dump Truck A40E Service Repair Manual.pdf
Nombre Apellidos
 
PDF
Pistons Volvo EC160C NL EC160CNL Excavator Service Repair Manual.pdf
Service Repair Manual
 
PDF
Where to Buy Verified LinkedIn Accounts Securely in 2025.pdf
trampdonal260
 
PDF
Engine Volvo EC160B LC EC160BLC Excavator Service Repair Manual.pdf
Service Repair Manual
 
PPTX
Instrument_Cluster_And_Infotainement.pptx
XEEDO
 
PPTX
Training Material_Verification Station.pptx
casttech1
 
PDF
Presentation KSR EV Product Plan for the year of 2023
galangarrafah1
 
Articulated Dump Truck John Deere 370E 410E 460E Technical Manual.pdf
Service Repair Manual
 
Smart_Doors_Trunk_Control_Presentation.pdf
XEEDO
 
APQP FOR AUTOMOTIVE AND PPAP FOR SUPPLIER
PrabhakarBhuvana
 
Bobcat t40140 telescopic handler service repair manual sn b33 j11001 and abov...
Service Repair Manual
 
Transmission John Deere 370E 410E 460E Technical Manual.pdf
Service Repair Manual
 
Why Has Vertical Farming Recently Become More Economical.pdf.pdf
Skyfield Agritech
 
Dongguan Sunnew ESS Profile for the year of 2023
galangarrafah1
 
industrialsafetyhazards-180118095222.ppt
gmoudgil1
 
Bài tập bổ trợ I-learn Smart World 9 HK1 Unit 4 (HS) (1).doc
XunHuyn12
 
CASE CX45B Series 2 Mini Excavator Service Repair Manual Instant Download.pdf
zhongxiaqielan90
 
Lightweight-and-quantum-resistant-authentication-for-the-Internet-of-Drones-I...
peran1805
 
Deutz D6D EBE2 Volvo EC160BLC Excavator Service Repair Manual.pdf
Service Repair Manual
 
Volvo EC160B LC EC160BLC Excavator Service Repair Manual Instant Download.pdf
Service Repair Manual
 
Volvo Dump Truck A40E Service Repair Manual.pdf
Nombre Apellidos
 
Pistons Volvo EC160C NL EC160CNL Excavator Service Repair Manual.pdf
Service Repair Manual
 
Where to Buy Verified LinkedIn Accounts Securely in 2025.pdf
trampdonal260
 
Engine Volvo EC160B LC EC160BLC Excavator Service Repair Manual.pdf
Service Repair Manual
 
Instrument_Cluster_And_Infotainement.pptx
XEEDO
 
Training Material_Verification Station.pptx
casttech1
 
Presentation KSR EV Product Plan for the year of 2023
galangarrafah1
 

Caterpillar cat 322 c ln 322cln excavator (prefix bgr) service repair manual (bgr00001 and up)

  • 1. Service Repair Manual Model 322C and 322C LN 322CLN EXCAVATOR
  • 2. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 322C EXCAVATOR BGR Configuration: 322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 3126 Engine Disassembly and Assembly 322C Excavator Machine Systems Media Number -RENR3843-07 Publication Date -01/02/2017 Date Updated -20/02/2017 i01974060 Control Valve (Auxiliary) - Disassemble - F2 Auxiliary Control Valve SMCS - 5051-015-AX Disassembly Procedure Start By: a. Remove the F2 auxiliary control valve. Refer to Disassembly and Assembly, "Control Valve (Auxiliary) - Remove" for the machine that is being serviced. NOTICE Keep all parts clean from contaminants. Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components. To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly. Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination. Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will prevent contamination from entering the internal mechanism. 1/8322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 3. Solenoid Valve and Housing Illustration 1 g00713277 1. Remove two bolts (2). Remove valve (1). Illustration 2 g00713314 2. Remove the O-ring seal (3) from the valve housing. Illustration 3 g00713315 3. Remove two bolts (4). Remove solenoid valve (5) from the housing. Remove fitting (6). 2/8322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 4. Illustration 4 g00713316 4. Remove O-ring seal (7) from fitting (6). Remove O-ring seal (8), (9), (10), and (11) from solenoid valve (5). Illustration 5 g00713317 5. Remove fitting (12), plug (13), and fitting (14). Illustration 6 g00713318 6. Remove O-ring seal (15) from fitting (12). Remove O-ring seal (16) from fitting (14). Remove O-ring seal (17) from plug (13). 3/8322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 5. Illustration 7 g00713319 7. Remove two bolts (18). Remove valve (19). Illustration 8 g00713320 8. Remove O-ring seal (20) from the valve housing. Illustration 9 g00713321 9. Remove two bolts (21). Remove solenoid valve (22) from the housing. Remove fitting (23). 4/8322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 6. Illustration 10 g00713322 10. Remove O-ring seal (24), (25), (26), and (27) from solenoid valve (22). Remove O-ring seal (28) from fitting (23). Illustration 11 g00713323 11. Remove fittings (29) and (32). Remove plugs (30) and (31). Illustration 12 g00713324 12. Remove O-ring seal (33) from plug (30). Remove O-ring seal (34) from fitting (29). Remove O-ring seal (35) from plug (31). Remove O-ring seal (36) from fitting (32). 5/8322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 7. Spool, Load Hold Check Valve, and Line Relief Valves Illustration 13 g00713411 1. Remove O-ring seals (37), (38), (39), and (40) from the valve housing. Remove spool (41). Remove line relief valves (42) and (44). Remove load hold check valve (43). Illustration 14 g00713419 Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. 2. Disassemble the load hold check valve. Remove check valve (45), spring (46), and O-ring seal (47) from plug (48). 6/8322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 8. Illustration 15 g00713427 3. Remove the O-ring seals and backup rings from line relief valves (42) and (44). Remove O- ring seals (49), (50), (52), (53), and (54). Remove backup rings (51) and (55). Illustration 16 g00713437 Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. 4. Remove bolt (56) and spring (57) from the spool. 7/8322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 9. Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Sat Sep 28 17:03:22 UTC+0800 2019 8/8322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 10. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 322C EXCAVATOR BGR Configuration: 322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 3126 Engine Disassembly and Assembly 322C Excavator Machine Systems Media Number -RENR3843-07 Publication Date -01/02/2017 Date Updated -20/02/2017 i01974067 Control Valve (Auxiliary) - Disassemble - F1 and F3 Auxiliary Control Valve SMCS - 5051-015-AX Disassembly Procedure Start By: a. Remove the auxiliary control valve. Refer to Disassembly and Assembly, "Control Valve (Auxiliary) - Remove" for the machine that is being serviced. NOTICE Keep all parts clean from contaminants. Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components. To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly. Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination. Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will prevent contamination from entering the internal mechanism. 1/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 11. Line Relief Valve and Load Hold Check Valve Illustration 1 g00708853 1. Remove line relief valve (1), fitting (2), and load hold check valve (3). Illustration 2 g00708935 Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. 2/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 12. 2. Disassemble the line relief valve. a. Remove plug (4). b. Remove O-ring seal (5), shims (6), and shim (7) from plug (4). c. Remove spring (8) and valve (9) from valve body (10). d. Remove O-ring seals (11) and (12) from valve body (10). Illustration 3 g00708878 3. Remove O-ring seal (13) from fitting (2). Illustration 4 g00708882 Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. 3/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 13. 4. Disassemble the load hold check valve. Remove check valve (14), spring (5), and O-ring seal (16) from plug (17). Illustration 5 g00708948 5. Remove line relief valve (18). Illustration 6 g00708875 6. Remove O-ring seals (19), (20), (22), (23), and (24) from line relief valve (18). Remove backup rings (21) and (25) from line relief valve (18). 4/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 14. Illustration 7 g00708954 7. Remove line relief valve (26), plug (27), and relief valve (28). Illustration 8 g00708962 8. Remove O-ring seals (29), (30), (32), (33), and (34) from line relief valve (26). Remove backup rings (31) and (35) from line relief valve (26). 5/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 15. Illustration 9 g00708965 9. Remove O-ring seal (36) from plug (27). Illustration 10 g00708972 Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. 10. Disassemble the relief valve. a. Remove nut (47). Remove adjuster (37). b. Remove O-ring seal (39) from the adjuster (37). c. Remove spring (40) and valve (42) from holder (38). Remove holder (38). d. Remove O-ring seal (41) from holder (38). e. Remove valve seat (53). f. Remove O-ring seal (52) and backup ring (51) from the valve seat (53). g. Remove spring (54). 6/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 16. h. Remove valve (55) from valve body (48). Remove ring (45), collar (44), and filter (43) from valve (55). i. Remove O-ring seals (46), (50), and (49) from valve body (48). Solenoid Valve and Housing Illustration 11 g00709076 1. Remove two bolts (57). Remove valve (56). Illustration 12 g00709077 2. Remove the O-ring seal (58) from the valve housing. 7/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 17. Illustration 13 g00709080 3. Remove two bolts (59). Remove solenoid valve (60) from the housing. Remove fitting (61). Illustration 14 g00709082 4. Remove O-ring seal (62) from fitting (61). Remove O-ring seal (63), (64), (65), and (66) from solenoid valve (60). Illustration 15 g00709083 5. Remove fitting (67), plug (68), and fitting (69). 8/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 18. Illustration 16 g00709086 6. Remove O-ring seal (70) from fitting (67). Remove O-ring seal (71) from fitting (69). Remove O-ring seal (72) from plug (68). Illustration 17 g00709089 7. Remove two bolts (73). Remove valve (74). Illustration 18 g00709090 8. Remove O-ring seal (75) from the valve housing. 9/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 19. Illustration 19 g00709091 9. Remove two bolts (76). Remove solenoid valve (77) from the housing. Remove fitting (78). Illustration 20 g00709092 10. Remove O-ring seal (79), (80), (81), and (82) from solenoid valve (77). Remove O-ring seal (83) from fitting (78). Illustration 21 g00709093 11. Remove fittings (84) and (87). Remove plugs (85) and (86). 10/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 3... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 20. Illustration 22 g00709094 12. Remove O-ring seal (88) from plug (85). Remove O-ring seal (89) from fitting (84). Remove O-ring seal (90) from plug (86). Remove O-ring seal (91) from fitting (87). Spool and Plug Illustration 23 g00709161 1. Remove O-ring seals (92), (93), (94), and (95) from the valve housing. Remove spool (96). Illustration 24 g00709162 11/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 3... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 21. Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. 2. Remove bolt (97) and spring (98) from the spool. Illustration 25 g00709163 3. Remove plug (99) from the valve housing. Illustration 26 g00709164 4. Remove O-ring seal (100) from plug (99). Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Sat Sep 28 17:04:22 UTC+0800 2019 12/13322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 3... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 22. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 322C EXCAVATOR BGR Configuration: 322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 3126 Engine Disassembly and Assembly 322C Excavator Machine Systems Media Number -RENR3843-07 Publication Date -01/02/2017 Date Updated -20/02/2017 i01973997 Control Valve (Auxiliary) - Assemble - F1 and F3 Auxiliary Control Valve SMCS - 5051-016-AX Assembly Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 1U-6396 O-Ring Assembly Compound B 155-0695 Thread Lock Compound Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. All disassembly and all assembly procedures must be performed on a clean work surface and in a clean hydraulic area. Keep cleaned parts covered and protected at all times. Note: O-ring seals, gaskets, and seals should always be replaced. A used O-ring seal may not have the same sealing properties as a new O-ring. Use Tooling (A) during the assembly procedure. Note: Apply a light film of hydraulic oil to all components before assembly. Spool and Plug 1/12322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 23. Illustration 1 g00709164 1. Install O-ring seal (100) on plug (99). Illustration 2 g00709163 2. Install plug (99) in the valve housing. Tighten plug (99) to 75 ± 7 N·m (55 ± 5 lb ft). Illustration 3 g00709162 3. Install spring (98). Apply Tooling (B) to bolt (97). Install bolt (97). Tighten bolt (97) to 50 + 10 − 0 N·m (37 + 7 − 0 lb ft). 2/12322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 24. Illustration 4 g00709161 4. Install spool (96). Install O-ring seals (92), (93), (94), and (95) in the valve housing. Solenoid Valve and Housing Illustration 5 g00709094 1. Install O-ring seal (88) on plug (85). Install O-ring seal (89) on fitting (84). Install O-ring seal (90) on plug (86). Install O-ring seal (91) on fitting (87). Illustration 6 g00709093 3/12322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 25. Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL. NO WAITING NOTE: If there is no response to click on the link above, please download the PDF document first and then click on it.
  • 26. 2. Install fittings (84) and (87). Install plugs (85) and (86). Illustration 7 g00709092 3. Install O-ring seal (79), (80), (81), and (82) on solenoid valve (77). Install O-ring seal (83) on fitting (78). Illustration 8 g00709091 4. Install fitting (78). Install solenoid valve (77) in the housing. Install two bolts (76). Illustration 9 g00709090 5. Install O-ring seal (75) in the valve housing. 4/12322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 27. Illustration 10 g00709089 6. Install valve (74). Install two bolts (73). Illustration 11 g00709086 7. Install O-ring seal (70) on fitting (67). Install O-ring seal (71) on fitting (69). Install O-ring seal (72) on plug (68). Illustration 12 g00709083 8. Install fitting (67), plug (68), and fitting (69). 5/12322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 28. Illustration 13 g00709082 9. Install O-ring seal (62) on fitting (61). Install O-ring seal (63), (64), (65), and (66) on solenoid valve (60). Illustration 14 g00709080 10. Install fitting (61). Install solenoid valve (60) in the housing. Install two bolts (59). Illustration 15 g00709077 11. Install the O-ring seal (58) in the valve housing. 6/12322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 29. Illustration 16 g00709076 12. Install valve (56). Install two bolts (57). Line Relief Valve and Load Hold Check Valve Illustration 17 g00708972 1. Assemble the relief valve. a. Install O-ring seals (49), (50), and (46) on valve body (48). b. Install filter (43), collar (44), and ring (45) in valve (55). c. Install valve (55) in valve body (48). d. Tighten valve (55) to 135 ± 10 N·m (100 ± 7 lb ft). e. Install O-ring seal (52) and backup ring (51) on valve seat (53). Install spring (54). f. Install valve seat (53). Install O-ring seal (41) on holder (38). Install holder (38). 7/12322C & 322C LN EXCAVATORS BGR00001-UP (MACHINE) POWERED BY 312... 2019/9/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...