SlideShare a Scribd company logo

Caterpillar cat 325 track type excavator (prefix 5 wk) service repair manual (5wk00001 and up)

J
JayHaines2

This document provides instructions for disassembling and assembling the main control valve for 325, 325L and 325N excavator models. It describes removing over 30 components of the valve including pressure control valves, check valves, relief valves, spools and housings. Precautions are given to identify parts, keep them clean, and install components back in their original locations.

Automotive
1 of 25
Download to read offline
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Service Repair Manual Models 325-A 325 325L EXCAVATOR
Shutdown SIS Previous Screen Product: EXCAVATOR Model: 325-A EXCAVATOR 5WK Configuration: 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED BY 3116 ENGINE Disassembly and Assembly MAIN CONTROL VALVE SUPPLEMENT FOR 325, 325 L AND 325 N EXCAV Media Number -SENR5462-00 Publication Date -01/05/1992 Date Updated -11/10/2001 Main Control Valve SMCS - 5451-015; 5451-016 Disassemble Main Control Valve Start By: a. remove main control valve* NOTE: The weight of the main control valve is 190 kg (420 lb) 1. Thoroughly clean the outside of the main control valve prior to disassembling it. NOTICE Put identification marks on all components of the main control valve as they are being removed. All parts must be reinstalled in their original locations. Do not damage any of the internal parts during removal. A damaged valve component will result in oil leakage and affect valve performance. Keep all internal parts of the valve clean and lubricated. 2. Remove and disassemble pressure control valve (2) as follows: 1/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
There is spring force against pressure control valve (2). When four bolts (1) that hold the pressure control valve in place are removed, the spring force will be released. To prevent possible personal injury, hold pressure control valve (2) in place by hand as bolts (1) are being removed. a. While holding pressure control valve (2) in place by hand, slowly remove four bolts (1). Remove pressure control valve (2) from the main valve body. b. Remove spring (3) from the main valve body. c. Remove valve assembly (4) from the main valve body. d. Remove O-ring seals (5) and (6) from the pressure control valve body. 2/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Exploded View Of Pressure Control Valve e. Remove plug (7) from each end of the valve body. Remove spring (8), valve (9), and spool (10) from the valve body. If necessary, remove two plugs (11) and five plugs (12) from the valve body. Remove the O-ring seal from each plug. 3. Remove and disassemble pressure control valve (14) as follows: a. Remove three bolts (13) and pressure control valve (14) from the main valve body. b. Remove O-ring seals (15) from the valve body. Remove plug (16) from the valve body. Exploded View Of Pressure Control Valve c. Remove two plugs (17), spring (18) and spool (19) from the valve body. If necessary, remove four plugs (20) and six plugs (21) from the valve body. Remove the O-ring seal from each plug. 3/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Remove the check valve assembly from the main valve body as follows: a. Remove four bolts (22) and plates (23) and (24) from the main valve body. Remove O-ring seal (25) from plate (23). Remove O-ring seal (26) from plate (24). b. Remove pilot (27), spring (29) and check valve (28) from the main valve body. NOTE: Plate (31) is only for manufacturing purposes. 4/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Remove two bolts (30) and the washers and plate (31) from the main valve body. Remove O- ring seal (32) from plate (31). 6. Remove the two check valves and five load check valves as follows: a. Remove two plugs (33) from the main valve body. Remove four plugs (34) and one plug (34A) from the main valve bodies. b. Remove O-ring seal (35) from each plug (34). Remove O-ring seal (37) and back-up ring (36) from each plug (33). c. Remove spring (38) and plunger (39) for each check valve and load check valve. 7. Remove three plugs (40) from the main valve bodies. Remove the O-ring seal from each plug. 5/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Remove sleeve (41) and sleeve (42) from the main valve body. 9. Remove the check valve from the main valve body. Remove plug (43). Remove sleeve bearing (44), spring (45) and valve (46). Remove the O-ring seal from plug (43). 10. Remove plug (50), spring (48) and check valve (47) from the main valve body. Remove O- ring seal (49) from the plug. 6/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Remove line relief valves (51) and (52) from the main valve bodies. 12. Disassemble line relief valves (51) and (52) as follows: NOTE: Only the O-ring seals and back-up rings are serviceable in the line relief valves (51) and (52). However the line relief valves can be disassembled for cleaning. a. Disassemble the line relief valves as shown. Remove O-ring seal (58) from the adapter. b. Remove back-up ring (53) and O-ring seal (54) from the valve. c. Remove O-ring seal (55) and two back-up rings (59) from the seat. d. Remove O-ring seal (57) from the piston. 13. Remove plug (60) from the main valve body. Remove the O-ring seal from the plug. 7/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Remove main relief valve (61) from the main valve body. 15. Disassemble main relief valve (61) as follows: a. Remove nut (62), the washer and plunger assembly (63) from the adjuster. b. Remove piston (68), spring (67) and valve (66) from adjuster (65). c. Loosen nut (64), and remove adjuster (65) from the valve group. Remove the O-ring seal from each end of the adjuster. d. Remove insert (69) from the valve body. Remove the two O-ring seals from the insert. 8/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
e. Remove seat (76), spring (75) and valve (74) from body (73). f. Remove O-ring seals (70), (71) and (72) from body (73). 16. Remove plug (77) from the main valve body. 17. Remove straight travel spool assembly (78) from the main valve body. 18. Disassemble the straight travel spool assembly. Remove piston (79) from spool (80). Remove dowel (82) and spring (81) from spool (80). Remove O-ring seal (83) from plug (77). 9/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Remove bolts (84) that hold nine housings (85) to the main valve bodies. Remove nine housings (85). 20. Remove O-ring seal (86) from each housing (85). 21. Remove boom spool assembly (87), stick spool assembly (88), swing spool assembly (89) and travel spool assembly (90) from the main valve body. 22. Remove travel spool assembly (91), attachment spool assembly (92), bucket spool assembly (93), boom spool assembly (94) and stick spool assembly (95) from the main valve body. NOTE: The disassembly procedure for spool assemblies (87), (88), (89), (90), (91), (92), (93) and (95) is the same. Spool assembly (94) is different in that it contains an internal selector spool. 23. Disassemble spool assemblies (87), (88), (89), (90), (91), (92), (93) and (95) as follows: 10/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
a. Slide adapter (96) of the spool assembly if so equipped. Remove O-ring seals (101) and (102) from adapter (96). b. Remove bolt (100), retainer (99), spring (98) and retainer (97) from the end of the spool. 24. Disassemble boom spool assembly (94) as follows: a. Remove plug (103), spring (108), spring (104) and valve group (109) from the end of the boom spool. Remove the O-ring seal from the plug. b. Remove bolt (107), retainer (111), spring (106) and retainer (110) from the end of the boom spool. 25. Remove bolts (112) and the washers that hold ten covers (113) to the main valve bodies. Remove ten covers (113). 26. Remove O-ring seal (114) from each cover (113). 11/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Remove spring (115) and seat (116) for the straight travel spool assembly. 28. Remove line relief valves (117) and (118) from the main valve bodies. 29. Disassemble line relief valves (117) and (118) as follows: NOTE: Only the O-ring seals and back-up rings are serviceable in the line relief valves (117) and (118). However, the line relief valves can be disassembled for cleaning. a. Disassemble the line relief valves as shown. Remove O-ring seal (124) from the adapter. b. Remove back-up ring (119) and O-ring seal (120) from the valve. c. Remove O-ring seal (121) and two back-up rings (125) from the seat. d. Remove O-ring seal (123) from the piston. 12/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
30. Remove two relief valves (126) from the main valve bodies. 31. Remove two plugs (127) from the main valve bodies. Remove the O-ring seals from the plugs. 32. Disassemble relief valves (126) as follows: a. Remove O-ring seal (132) from body (128). b. Remove plug (131) from body (128). Remove the O-ring seal from the plug. Remove spring (130) and valve (129) from body (128). 33. Remove remaining plugs (133) from bottom side of the main valve bodies. Remove the O-ring seals from the plugs. 34. Remove four bolts (136) and the washers that hold main valve bodies (134) and (135) together. Separate the valve bodies. 13/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
35. Remove four large O-ring seals (137) and seven small O-ring seals (138) from the main valve body. 36. Using an appropriate size Allen wrench, remove the two plugs from main valve body (135) at locations (X). * For removal of the main control valve, see the 325, 325 L, & 325 N Excavators Vehicle Systems Disassembly & Assembly module, Form No. SENR5408. Assemble Main Control Valve NOTICE Be sure all parts of the main control valve are thoroughly clean and free of dirt and debris. Remove any scratches or burrs from valve components with polishing paper or and oil stone. Check the condition of all O-ring seals, back-up rings and springs. If any of the components are worn or damaged, use new parts for replacement. Put clean hydraulic oil on the components of the valve as they are being installed. Be sure to install all parts in their original locations. 1. Using the an appropriate size Allen wrench, install the two plugs in main valve body (135) at locations (X). 14/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
2. Install four large O-ring seals (137) and seven small O-ring seals (138) in the main valve body. 3. Put main valve body (135) in position on main valve body (134). Install four bolts (136) that hold the main valve bodies together. Tighten the four bolts evenly. 4. Install the O-ring seals on plugs (133). Reinstall plugs (133) in their original locations in the main valve bodies. 5. Assemble two relief valves (126) as follows: a. Install O-ring seal (132) on body (128). Install the O-ring seal on plug (131). b. Install valve (129), spring (130) and plug (131) in body (128). 15/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Install two relief valves (126) in the main valve bodies as shown. Tighten the relief valves to a torque of 145 ± 15 N·m (105 ± 11 lb ft). 7. Install the O-ring seal on each plug (127). Install the two plugs in the main valve bodies as shown. 8. Assemble line relief valves (117) and (118). a. Install O-ring seal on the piston. b. Install two back-up rings (125) and O-ring seal (121) on the seat in the positions shown. c. Install O-ring seal (120) and back-up ring (119) on the valve in the positions shown. d. Install O-ring seal (124) on the adapter. e. Reassemble the line relief valves and as shown. 9. Install line relief valves (117) and (118) in the main valve body as shown. 16/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Install seat (116) and spring (115) for the straight travel spool in the main valve body as shown. 11. Install an O-ring seal (114) in each cover (113). 12. Reinstall ten covers (113) on the main valve bodies as shown. Use bolts (112) and the washers to hold the covers in place. NOTE: The assembly procedure for spool assemblies (95), (93), (92), (91), (90), (89), (88) and (87) is the same. Spool assembly (94) is different in that it contains an internal selector spool. 13. Assemble boom spool assembly (94) as follows: a. Install retainer (110), spring (106), retainer (111) and bolt (107) on the end of the valve spool as shown. b. Install the O-ring seal on plug (103). Install valve group (109), spring (104), spring (108) and plug (103) in the end of the valve spool as shown. 17/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Assemble spool assemblies (95), (93), (92), (91), (90), (89), (88) and (87) as follows: a. Install O-ring seals (101) and (102) in each adapter (96). b. Install retainer (97), spring (98), retainer (99) and bolt (100) on the end of the spool assembly as shown. c. Slide adapter (96) on the appropriate spool assemblies. 15. Install stick spool assembly (95), boom spool assembly (94), bucket spool assembly (93), attachment spool assembly (92) and travel spool assembly (91) in the main valve body as shown. 16. Install travel spool assembly (90), swing spool assembly (89), stick spool assembly (88) and boom spool assembly (87) in the main valve body as shown. 17. Install an O-ring seal (86) in each housing (85). 18/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Reinstall nine housings (85) on the main valve bodies as shown. Use bolts (84) and the washers to hold the housings in place. 19. Reassemble straight travel spool assembly (78) as follows: a. Install O-ring seal (83) on plug (77). b. Install spring (81), dowel (82) and plug (77) in the end of the spool as shown. c. Install piston (79) in the end of the spool as shown. 20. Install straight travel spool assembly (78) in the main valve body as shown. 21. Install the O-ring seal on plug (77). Install the plug over the end of the straight travel spool assembly as shown. 22. Assemble main relief valve (61) as follows: 19/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
a. Install O-ring seals (72), (71) and (70) on body (73). b. Install valve (74), spring (75) and seat (76) in body (73) as shown. c. Install the two O-ring seals on insert (69). Install the insert in the valve body. d. Install the O-ring seal on each end of adjuster (65). Install nut (64) and adjuster (65) in the valve group as shown. e. Install valve (66), spring (67) and piston (68) in adjuster (65) as shown. f. Install plunger assembly (63), the washer and nut (62) in the adjuster as shown. 20/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL. NO WAITING NOTE: If there is no response to click on the link above, please download the PDF document first and then click on it.
23. Install main relief valve (61) in the main valve body. Tighten the main relief valve to a torque of 135 ± 10 N·m (100 ± 7 lb ft). 24. Install the O-ring seal on plug (60). Install plug (60) in the main valve body. Tighten the plug to a torque of 95 ± 14 N·m (70 ± 10 lb ft). 25. Assemble line relief valves (51) and (52). a. Install O-ring seal on the piston. b. Install two back-up rings (59) and O-ring seal (55) on the seat in the positions shown. c. Install O-ring seal (54) and back-up ring (53) on the valve in the positions shown. d. Install O-ring seal (58) on the adapter. e. Reassemble the line relief valves and as shown. 21/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Install line relief valves (51) and (52) in the main valve bodies as shown. Tighten the line relief valves to a torque of 95 ± 14 N·m (70 ± 10 lb ft). 27. Install O-ring seal (49) on plug (50). Install check valve (47), spring (48) and plug (50) in the main valve body. Tighten the plug to a torque of 200 ± 25 N·m (150 ± 18 lb ft). 28. Install the O-ring seal on plug (43). Install valve (46), spring (45) and sleeve bearing (44) in the main valve body as shown. Install plug (43). Tighten the plug to a torque of 200 ± 25 N·m (150 ± 18 lb ft). 22/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Install sleeves (41) and (42) in the main valve body as shown. 30. Install an O-ring seal on each plug (40). Install the plugs in the main valve bodies as shown. 31. Install the two check valves and five load check valves in the main valve bodies as follows: a. Install plunger (39) and spring (38) for each check valve and load check valve. 23/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

More Related Content

PDF
Caterpillar cat 325 track type excavator (prefix 9 kl) service repair manual ...
fjsjjekdkme
 
PDF
Caterpillar cat e180 hydraulic excavator (prefix 1 rf) service repair manual ...
ufjjsejkkemmd
 
PDF
Caterpillar cat 245 b series ii excavator (prefix 1sj) service repair manual ...
fujsfskekem
 
PDF
Caterpillar cat 245 excavator (prefix 84 x) service repair manual (84x00001 a...
uudfjjjskkemmd
 
PDF
Caterpillar cat m315 c wheeled excavator (prefix bdm) service repair manual (...
hhjsekmdmm
 
PDF
Caterpillar cat 325 l track type excavator (prefix 9kl) service repair manual...
f98soeodidkdk
 
PDF
Caterpillar cat 325 track type excavator (prefix 9 kl) service repair manual ...
f98soeodidkdk
 
PDF
Caterpillar cat 325 a l track type excavator (prefix 9 kl) service repair man...
f98soeodidkdk
 
Caterpillar cat 325 track type excavator (prefix 9 kl) service repair manual ...
fjsjjekdkme
 
Caterpillar cat e180 hydraulic excavator (prefix 1 rf) service repair manual ...
ufjjsejkkemmd
 
Caterpillar cat 245 b series ii excavator (prefix 1sj) service repair manual ...
fujsfskekem
 
Caterpillar cat 245 excavator (prefix 84 x) service repair manual (84x00001 a...
uudfjjjskkemmd
 
Caterpillar cat m315 c wheeled excavator (prefix bdm) service repair manual (...
hhjsekmdmm
 
Caterpillar cat 325 l track type excavator (prefix 9kl) service repair manual...
f98soeodidkdk
 
Caterpillar cat 325 track type excavator (prefix 9 kl) service repair manual ...
f98soeodidkdk
 
Caterpillar cat 325 a l track type excavator (prefix 9 kl) service repair man...
f98soeodidkdk
 

Similar to Caterpillar cat 325 track type excavator (prefix 5 wk) service repair manual (5wk00001 and up) (20)

PDF
Caterpillar cat 325 a l track type excavator (prefix 9 kl) service repair man...
fjsjjekdkme
 
PDF
Caterpillar cat 325 l track type excavator (prefix 9kl) service repair manual...
fjsjjekdkme
 
PDF
Caterpillar cat 325 excavator (prefix 2 jk) service repair manual (2jk00001 a...
hfjsekekmmd
 
PDF
Caterpillar cat 325 l excavator (prefix 2jk) service repair manual (2jk00001 ...
hfjsekekmmd
 
PDF
Caterpillar cat 325 excavator (prefix 2 jk) service repair manual (2jk00001 a...
cdfzxs
 
PDF
Caterpillar cat 325 l excavator (prefix 2jk) service repair manual (2jk00001 ...
jdfjskekmdme
 
PDF
Caterpillar cat 325 excavator (prefix 2 jk) service repair manual (2jk00001 a...
jdfjskekmdme
 
PDF
Caterpillar cat 325 l excavator (prefix 2jk) service repair manual (2jk00001 ...
cdfzxs
 
PDF
Caterpillar cat 325 l excavator (prefix 2jk) service repair manual (2jk00001 ...
diskkdkdmdm
 
PDF
Caterpillar cat 325 excavator (prefix 2 jk) service repair manual (2jk00001 a...
diskkdkdmdm
 
PDF
Caterpillar Cat 325 TRACK TYPE EXCAVATOR Service Repair Manual (6KK00001 and ...
kesi7153062
 
PDF
Caterpillar Cat 325L TRACK TYPE EXCAVATOR Service Repair Manual (6KK00001 and...
kesi7153062
 
PDF
Caterpillar Cat 325 TRACK TYPE EXCAVATOR Service Repair Manual (6KK00001 and ...
qme229722
 
PDF
Caterpillar Cat 325L TRACK TYPE EXCAVATOR Service Repair Manual (6KK00001 and...
yfbr995309
 
PDF
Caterpillar Cat 325 TRACK TYPE EXCAVATOR Service Repair Manual (6KK00001 and ...
shudun96087
 
PDF
Caterpillar Cat 325L TRACK TYPE EXCAVATOR Service Repair Manual (6KK00001 and...
shudun96087
 
PDF
Caterpillar cat 307 b mini hydraulic excavator (prefix 5cw) service repair ma...
useoosekmmd
 
PDF
Caterpillar cat 307 b mini hydraulic excavator (prefix 5cw) service repair ma...
dfujjsefkemm
 
PDF
Caterpillar cat 307 b mini hydraulic excavator (prefix 5cw) service repair ma...
fjsekksmefm
 
PDF
Caterpillar cat 325 c l excavator (prefix bkw) service repair manual (bkw0000...
fhsejkdkmen
 
Caterpillar cat 325 a l track type excavator (prefix 9 kl) service repair man...
fjsjjekdkme
 
Caterpillar cat 325 l track type excavator (prefix 9kl) service repair manual...
fjsjjekdkme
 
Caterpillar cat 325 excavator (prefix 2 jk) service repair manual (2jk00001 a...
hfjsekekmmd
 
Caterpillar cat 325 l excavator (prefix 2jk) service repair manual (2jk00001 ...
hfjsekekmmd
 
Caterpillar cat 325 excavator (prefix 2 jk) service repair manual (2jk00001 a...
cdfzxs
 
Caterpillar cat 325 l excavator (prefix 2jk) service repair manual (2jk00001 ...
jdfjskekmdme
 
Caterpillar cat 325 excavator (prefix 2 jk) service repair manual (2jk00001 a...
jdfjskekmdme
 
Caterpillar cat 325 l excavator (prefix 2jk) service repair manual (2jk00001 ...
cdfzxs
 
Caterpillar cat 325 l excavator (prefix 2jk) service repair manual (2jk00001 ...
diskkdkdmdm
 
Caterpillar cat 325 excavator (prefix 2 jk) service repair manual (2jk00001 a...
diskkdkdmdm
 
Caterpillar Cat 325 TRACK TYPE EXCAVATOR Service Repair Manual (6KK00001 and ...
kesi7153062
 
Caterpillar Cat 325L TRACK TYPE EXCAVATOR Service Repair Manual (6KK00001 and...
kesi7153062
 
Caterpillar Cat 325 TRACK TYPE EXCAVATOR Service Repair Manual (6KK00001 and ...
qme229722
 
Caterpillar Cat 325L TRACK TYPE EXCAVATOR Service Repair Manual (6KK00001 and...
yfbr995309
 
Caterpillar Cat 325 TRACK TYPE EXCAVATOR Service Repair Manual (6KK00001 and ...
shudun96087
 
Caterpillar Cat 325L TRACK TYPE EXCAVATOR Service Repair Manual (6KK00001 and...
shudun96087
 
Caterpillar cat 307 b mini hydraulic excavator (prefix 5cw) service repair ma...
useoosekmmd
 
Caterpillar cat 307 b mini hydraulic excavator (prefix 5cw) service repair ma...
dfujjsefkemm
 
Caterpillar cat 307 b mini hydraulic excavator (prefix 5cw) service repair ma...
fjsekksmefm
 
Caterpillar cat 325 c l excavator (prefix bkw) service repair manual (bkw0000...
fhsejkdkmen
 
Ad

More from JayHaines2 (20)

PDF
Kawasaki 70 z6 wheel loader service repair manual (serial no. 70c7 0101 and up)
JayHaines2
 
PDF
Kawasaki 70 z6 wheel loader equipment components parts catalogue manual (seri...
JayHaines2
 
PDF
Kawasaki 70 z6 80z6 wheel loader operator manual (serial no. 80c7 0101 and up)
JayHaines2
 
PDF
Kawasaki 70 z6 80z6 wheel loader operator manual (serial no. 70c7 0101 and up)
JayHaines2
 
PDF
Kawasaki 70 tm7 wheel loader service repair manual (serial no. 70c6 5001 and up)
JayHaines2
 
PDF
Kawasaki 67 z7b wheel loader service repair manual (serial no. 65c5 5001 and up)
JayHaines2
 
PDF
Kawasaki 67 z7b wheel loader parts catalogue manual (serial no. 65c5 5001 and...
JayHaines2
 
PDF
Kawasaki 67 z7b wheel loader operation and maintenance manual (serial no. 65c...
JayHaines2
 
PDF
Kawasaki 67 z7 67tm7 wheel loader service repair manual (65j5 8001 and up)
JayHaines2
 
PDF
Kawasaki 67 z7 67tm7 wheel loader service repair manual (65j5 5001 and up)
JayHaines2
 
PDF
Kawasaki 67 tm7b wheel loader operation and maintenance manual (serial no. 65...
JayHaines2
 
PDF
Kawasaki 62 z7 67z7 67tm7 wheel loader service repair manual (65j5 5001 and...
JayHaines2
 
PDF
Kawasaki 62 z7 67z7 67tm7 wheel loader service repair manual (62j1 5001 and...
JayHaines2
 
PDF
Kawasaki 60 z7 wheel loader parts catalogue manual (serial no. 60d1 5001 and up)
JayHaines2
 
PDF
Kawasaki 60 z7 wheel loader parts catalogue manual (60d1 8001 and up)
JayHaines2
 
PDF
Kawasaki 60 z7 wheel loader operation and maintenance manual (serial no. 60d1...
JayHaines2
 
PDF
Caterpillar cat 325 ln excavator (prefix 9sg) service repair manual (9sg00001...
JayHaines2
 
PDF
Caterpillar cat 325 ll excavator (prefix 7lm) service repair manual (7lm00001...
JayHaines2
 
PDF
Caterpillar cat 325 l track type excavator (prefix 8nl) service repair manual...
JayHaines2
 
PDF
Caterpillar cat 325 l track type excavator (prefix 8jg) service repair manual...
JayHaines2
 
Kawasaki 70 z6 wheel loader service repair manual (serial no. 70c7 0101 and up)
JayHaines2
 
Kawasaki 70 z6 wheel loader equipment components parts catalogue manual (seri...
JayHaines2
 
Kawasaki 70 z6 80z6 wheel loader operator manual (serial no. 80c7 0101 and up)
JayHaines2
 
Kawasaki 70 z6 80z6 wheel loader operator manual (serial no. 70c7 0101 and up)
JayHaines2
 
Kawasaki 70 tm7 wheel loader service repair manual (serial no. 70c6 5001 and up)
JayHaines2
 
Kawasaki 67 z7b wheel loader service repair manual (serial no. 65c5 5001 and up)
JayHaines2
 
Kawasaki 67 z7b wheel loader parts catalogue manual (serial no. 65c5 5001 and...
JayHaines2
 
Kawasaki 67 z7b wheel loader operation and maintenance manual (serial no. 65c...
JayHaines2
 
Kawasaki 67 z7 67tm7 wheel loader service repair manual (65j5 8001 and up)
JayHaines2
 
Kawasaki 67 z7 67tm7 wheel loader service repair manual (65j5 5001 and up)
JayHaines2
 
Kawasaki 67 tm7b wheel loader operation and maintenance manual (serial no. 65...
JayHaines2
 
Kawasaki 62 z7 67z7 67tm7 wheel loader service repair manual (65j5 5001 and...
JayHaines2
 
Kawasaki 62 z7 67z7 67tm7 wheel loader service repair manual (62j1 5001 and...
JayHaines2
 
Kawasaki 60 z7 wheel loader parts catalogue manual (serial no. 60d1 5001 and up)
JayHaines2
 
Kawasaki 60 z7 wheel loader parts catalogue manual (60d1 8001 and up)
JayHaines2
 
Kawasaki 60 z7 wheel loader operation and maintenance manual (serial no. 60d1...
JayHaines2
 
Caterpillar cat 325 ln excavator (prefix 9sg) service repair manual (9sg00001...
JayHaines2
 
Caterpillar cat 325 ll excavator (prefix 7lm) service repair manual (7lm00001...
JayHaines2
 
Caterpillar cat 325 l track type excavator (prefix 8nl) service repair manual...
JayHaines2
 
Caterpillar cat 325 l track type excavator (prefix 8jg) service repair manual...
JayHaines2
 
Ad

Recently uploaded (20)

PDF
Volvo EC290C NL EC290CNL excavator weight.pdf
Service Repair Manual
 
PDF
Volvo ecr145cl specs Service Manual Download
Service Repair Manual
 
PPTX
capstoneoooooooooooooooooooooooooooooooooo
InzamamUlHaque62
 
DOCX
lp of food hygiene.docxvvvvvvvvvvvvvvvvvvvvvvv
SomaPal11
 
PDF
Caterpillar CAT 311B EXCAVATOR (8GR00001-UP) Operation and Maintenance Manual...
ovhzz53
 
PDF
How much does a e145 excavator weight.pdf
Service Repair Manual
 
PPTX
Chapter-1.pptxhhhhhhhhhhhhhhhhhhhhhhhhhh
JanakiRaman206018
 
PPT
Kaizen for Beginners and how to implement Kaizen
pugal801
 
PDF
Todays Technician Automotive Heating & Air Conditioning Classroom Manual and ...
solutionsmanual3
 
PPTX
Materi Kuliah Umum Prof. Hsien Tsai Wu.pptx
MUHAMMADMAULIDAN7
 
PPTX
vsdfhlahsadfjkhasihdflakjsdfhlajdhlfkjahfdljkash
BonySimbolon
 
PDF
Honda Dealership SNS Evaluation pdf/ppts
savleenk88
 
PDF
Volvo EC300D L EC300DL excavator weight Manuals.pdf
Service Repair Manual
 
PDF
Presentation.pdf ...............gjtn....tdubsr..........
dennypaul888
 
PDF
What are dimensions of the Volvo ECR235cl.pdf
Service Repair Manual
 
PDF
How Much does a Volvo EC290C NL EC290CNL Weight.pdf
Service Repair Manual
 
PDF
Volvo EC290C NL EC290CNL engine Manual.pdf
Service Repair Manual
 
PPTX
IMMUNITY TYPES PPT.pptx very good , sufficient
SomaPal11
 
PDF
Volvo ecr88 battery location Service Repair Manual.pdf
Service Repair Manual
 
PDF
higher edu open stores 12.5.24 (1).pdf forreal
Ahii2
 
Volvo EC290C NL EC290CNL excavator weight.pdf
Service Repair Manual
 
Volvo ecr145cl specs Service Manual Download
Service Repair Manual
 
capstoneoooooooooooooooooooooooooooooooooo
InzamamUlHaque62
 
lp of food hygiene.docxvvvvvvvvvvvvvvvvvvvvvvv
SomaPal11
 
Caterpillar CAT 311B EXCAVATOR (8GR00001-UP) Operation and Maintenance Manual...
ovhzz53
 
How much does a e145 excavator weight.pdf
Service Repair Manual
 
Chapter-1.pptxhhhhhhhhhhhhhhhhhhhhhhhhhh
JanakiRaman206018
 
Kaizen for Beginners and how to implement Kaizen
pugal801
 
Todays Technician Automotive Heating & Air Conditioning Classroom Manual and ...
solutionsmanual3
 
Materi Kuliah Umum Prof. Hsien Tsai Wu.pptx
MUHAMMADMAULIDAN7
 
vsdfhlahsadfjkhasihdflakjsdfhlajdhlfkjahfdljkash
BonySimbolon
 
Honda Dealership SNS Evaluation pdf/ppts
savleenk88
 
Volvo EC300D L EC300DL excavator weight Manuals.pdf
Service Repair Manual
 
Presentation.pdf ...............gjtn....tdubsr..........
dennypaul888
 
What are dimensions of the Volvo ECR235cl.pdf
Service Repair Manual
 
How Much does a Volvo EC290C NL EC290CNL Weight.pdf
Service Repair Manual
 
Volvo EC290C NL EC290CNL engine Manual.pdf
Service Repair Manual
 
IMMUNITY TYPES PPT.pptx very good , sufficient
SomaPal11
 
Volvo ecr88 battery location Service Repair Manual.pdf
Service Repair Manual
 
higher edu open stores 12.5.24 (1).pdf forreal
Ahii2
 

Caterpillar cat 325 track type excavator (prefix 5 wk) service repair manual (5wk00001 and up)

  • 2. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 325-A EXCAVATOR 5WK Configuration: 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED BY 3116 ENGINE Disassembly and Assembly MAIN CONTROL VALVE SUPPLEMENT FOR 325, 325 L AND 325 N EXCAV Media Number -SENR5462-00 Publication Date -01/05/1992 Date Updated -11/10/2001 Main Control Valve SMCS - 5451-015; 5451-016 Disassemble Main Control Valve Start By: a. remove main control valve* NOTE: The weight of the main control valve is 190 kg (420 lb) 1. Thoroughly clean the outside of the main control valve prior to disassembling it. NOTICE Put identification marks on all components of the main control valve as they are being removed. All parts must be reinstalled in their original locations. Do not damage any of the internal parts during removal. A damaged valve component will result in oil leakage and affect valve performance. Keep all internal parts of the valve clean and lubricated. 2. Remove and disassemble pressure control valve (2) as follows: 1/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 3. There is spring force against pressure control valve (2). When four bolts (1) that hold the pressure control valve in place are removed, the spring force will be released. To prevent possible personal injury, hold pressure control valve (2) in place by hand as bolts (1) are being removed. a. While holding pressure control valve (2) in place by hand, slowly remove four bolts (1). Remove pressure control valve (2) from the main valve body. b. Remove spring (3) from the main valve body. c. Remove valve assembly (4) from the main valve body. d. Remove O-ring seals (5) and (6) from the pressure control valve body. 2/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 4. Exploded View Of Pressure Control Valve e. Remove plug (7) from each end of the valve body. Remove spring (8), valve (9), and spool (10) from the valve body. If necessary, remove two plugs (11) and five plugs (12) from the valve body. Remove the O-ring seal from each plug. 3. Remove and disassemble pressure control valve (14) as follows: a. Remove three bolts (13) and pressure control valve (14) from the main valve body. b. Remove O-ring seals (15) from the valve body. Remove plug (16) from the valve body. Exploded View Of Pressure Control Valve c. Remove two plugs (17), spring (18) and spool (19) from the valve body. If necessary, remove four plugs (20) and six plugs (21) from the valve body. Remove the O-ring seal from each plug. 3/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 5. 4. Remove the check valve assembly from the main valve body as follows: a. Remove four bolts (22) and plates (23) and (24) from the main valve body. Remove O-ring seal (25) from plate (23). Remove O-ring seal (26) from plate (24). b. Remove pilot (27), spring (29) and check valve (28) from the main valve body. NOTE: Plate (31) is only for manufacturing purposes. 4/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 6. 5. Remove two bolts (30) and the washers and plate (31) from the main valve body. Remove O- ring seal (32) from plate (31). 6. Remove the two check valves and five load check valves as follows: a. Remove two plugs (33) from the main valve body. Remove four plugs (34) and one plug (34A) from the main valve bodies. b. Remove O-ring seal (35) from each plug (34). Remove O-ring seal (37) and back-up ring (36) from each plug (33). c. Remove spring (38) and plunger (39) for each check valve and load check valve. 7. Remove three plugs (40) from the main valve bodies. Remove the O-ring seal from each plug. 5/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 7. 8. Remove sleeve (41) and sleeve (42) from the main valve body. 9. Remove the check valve from the main valve body. Remove plug (43). Remove sleeve bearing (44), spring (45) and valve (46). Remove the O-ring seal from plug (43). 10. Remove plug (50), spring (48) and check valve (47) from the main valve body. Remove O- ring seal (49) from the plug. 6/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 8. 11. Remove line relief valves (51) and (52) from the main valve bodies. 12. Disassemble line relief valves (51) and (52) as follows: NOTE: Only the O-ring seals and back-up rings are serviceable in the line relief valves (51) and (52). However the line relief valves can be disassembled for cleaning. a. Disassemble the line relief valves as shown. Remove O-ring seal (58) from the adapter. b. Remove back-up ring (53) and O-ring seal (54) from the valve. c. Remove O-ring seal (55) and two back-up rings (59) from the seat. d. Remove O-ring seal (57) from the piston. 13. Remove plug (60) from the main valve body. Remove the O-ring seal from the plug. 7/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 9. 14. Remove main relief valve (61) from the main valve body. 15. Disassemble main relief valve (61) as follows: a. Remove nut (62), the washer and plunger assembly (63) from the adjuster. b. Remove piston (68), spring (67) and valve (66) from adjuster (65). c. Loosen nut (64), and remove adjuster (65) from the valve group. Remove the O-ring seal from each end of the adjuster. d. Remove insert (69) from the valve body. Remove the two O-ring seals from the insert. 8/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 10. e. Remove seat (76), spring (75) and valve (74) from body (73). f. Remove O-ring seals (70), (71) and (72) from body (73). 16. Remove plug (77) from the main valve body. 17. Remove straight travel spool assembly (78) from the main valve body. 18. Disassemble the straight travel spool assembly. Remove piston (79) from spool (80). Remove dowel (82) and spring (81) from spool (80). Remove O-ring seal (83) from plug (77). 9/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED ... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 11. 19. Remove bolts (84) that hold nine housings (85) to the main valve bodies. Remove nine housings (85). 20. Remove O-ring seal (86) from each housing (85). 21. Remove boom spool assembly (87), stick spool assembly (88), swing spool assembly (89) and travel spool assembly (90) from the main valve body. 22. Remove travel spool assembly (91), attachment spool assembly (92), bucket spool assembly (93), boom spool assembly (94) and stick spool assembly (95) from the main valve body. NOTE: The disassembly procedure for spool assemblies (87), (88), (89), (90), (91), (92), (93) and (95) is the same. Spool assembly (94) is different in that it contains an internal selector spool. 23. Disassemble spool assemblies (87), (88), (89), (90), (91), (92), (93) and (95) as follows: 10/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 12. a. Slide adapter (96) of the spool assembly if so equipped. Remove O-ring seals (101) and (102) from adapter (96). b. Remove bolt (100), retainer (99), spring (98) and retainer (97) from the end of the spool. 24. Disassemble boom spool assembly (94) as follows: a. Remove plug (103), spring (108), spring (104) and valve group (109) from the end of the boom spool. Remove the O-ring seal from the plug. b. Remove bolt (107), retainer (111), spring (106) and retainer (110) from the end of the boom spool. 25. Remove bolts (112) and the washers that hold ten covers (113) to the main valve bodies. Remove ten covers (113). 26. Remove O-ring seal (114) from each cover (113). 11/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 13. 27. Remove spring (115) and seat (116) for the straight travel spool assembly. 28. Remove line relief valves (117) and (118) from the main valve bodies. 29. Disassemble line relief valves (117) and (118) as follows: NOTE: Only the O-ring seals and back-up rings are serviceable in the line relief valves (117) and (118). However, the line relief valves can be disassembled for cleaning. a. Disassemble the line relief valves as shown. Remove O-ring seal (124) from the adapter. b. Remove back-up ring (119) and O-ring seal (120) from the valve. c. Remove O-ring seal (121) and two back-up rings (125) from the seat. d. Remove O-ring seal (123) from the piston. 12/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 14. 30. Remove two relief valves (126) from the main valve bodies. 31. Remove two plugs (127) from the main valve bodies. Remove the O-ring seals from the plugs. 32. Disassemble relief valves (126) as follows: a. Remove O-ring seal (132) from body (128). b. Remove plug (131) from body (128). Remove the O-ring seal from the plug. Remove spring (130) and valve (129) from body (128). 33. Remove remaining plugs (133) from bottom side of the main valve bodies. Remove the O-ring seals from the plugs. 34. Remove four bolts (136) and the washers that hold main valve bodies (134) and (135) together. Separate the valve bodies. 13/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 15. 35. Remove four large O-ring seals (137) and seven small O-ring seals (138) from the main valve body. 36. Using an appropriate size Allen wrench, remove the two plugs from main valve body (135) at locations (X). * For removal of the main control valve, see the 325, 325 L, & 325 N Excavators Vehicle Systems Disassembly & Assembly module, Form No. SENR5408. Assemble Main Control Valve NOTICE Be sure all parts of the main control valve are thoroughly clean and free of dirt and debris. Remove any scratches or burrs from valve components with polishing paper or and oil stone. Check the condition of all O-ring seals, back-up rings and springs. If any of the components are worn or damaged, use new parts for replacement. Put clean hydraulic oil on the components of the valve as they are being installed. Be sure to install all parts in their original locations. 1. Using the an appropriate size Allen wrench, install the two plugs in main valve body (135) at locations (X). 14/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 16. 2. Install four large O-ring seals (137) and seven small O-ring seals (138) in the main valve body. 3. Put main valve body (135) in position on main valve body (134). Install four bolts (136) that hold the main valve bodies together. Tighten the four bolts evenly. 4. Install the O-ring seals on plugs (133). Reinstall plugs (133) in their original locations in the main valve bodies. 5. Assemble two relief valves (126) as follows: a. Install O-ring seal (132) on body (128). Install the O-ring seal on plug (131). b. Install valve (129), spring (130) and plug (131) in body (128). 15/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 17. 6. Install two relief valves (126) in the main valve bodies as shown. Tighten the relief valves to a torque of 145 ± 15 N·m (105 ± 11 lb ft). 7. Install the O-ring seal on each plug (127). Install the two plugs in the main valve bodies as shown. 8. Assemble line relief valves (117) and (118). a. Install O-ring seal on the piston. b. Install two back-up rings (125) and O-ring seal (121) on the seat in the positions shown. c. Install O-ring seal (120) and back-up ring (119) on the valve in the positions shown. d. Install O-ring seal (124) on the adapter. e. Reassemble the line relief valves and as shown. 9. Install line relief valves (117) and (118) in the main valve body as shown. 16/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 18. 10. Install seat (116) and spring (115) for the straight travel spool in the main valve body as shown. 11. Install an O-ring seal (114) in each cover (113). 12. Reinstall ten covers (113) on the main valve bodies as shown. Use bolts (112) and the washers to hold the covers in place. NOTE: The assembly procedure for spool assemblies (95), (93), (92), (91), (90), (89), (88) and (87) is the same. Spool assembly (94) is different in that it contains an internal selector spool. 13. Assemble boom spool assembly (94) as follows: a. Install retainer (110), spring (106), retainer (111) and bolt (107) on the end of the valve spool as shown. b. Install the O-ring seal on plug (103). Install valve group (109), spring (104), spring (108) and plug (103) in the end of the valve spool as shown. 17/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 19. 14. Assemble spool assemblies (95), (93), (92), (91), (90), (89), (88) and (87) as follows: a. Install O-ring seals (101) and (102) in each adapter (96). b. Install retainer (97), spring (98), retainer (99) and bolt (100) on the end of the spool assembly as shown. c. Slide adapter (96) on the appropriate spool assemblies. 15. Install stick spool assembly (95), boom spool assembly (94), bucket spool assembly (93), attachment spool assembly (92) and travel spool assembly (91) in the main valve body as shown. 16. Install travel spool assembly (90), swing spool assembly (89), stick spool assembly (88) and boom spool assembly (87) in the main valve body as shown. 17. Install an O-ring seal (86) in each housing (85). 18/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 20. 18. Reinstall nine housings (85) on the main valve bodies as shown. Use bolts (84) and the washers to hold the housings in place. 19. Reassemble straight travel spool assembly (78) as follows: a. Install O-ring seal (83) on plug (77). b. Install spring (81), dowel (82) and plug (77) in the end of the spool as shown. c. Install piston (79) in the end of the spool as shown. 20. Install straight travel spool assembly (78) in the main valve body as shown. 21. Install the O-ring seal on plug (77). Install the plug over the end of the straight travel spool assembly as shown. 22. Assemble main relief valve (61) as follows: 19/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 21. a. Install O-ring seals (72), (71) and (70) on body (73). b. Install valve (74), spring (75) and seat (76) in body (73) as shown. c. Install the two O-ring seals on insert (69). Install the insert in the valve body. d. Install the O-ring seal on each end of adjuster (65). Install nut (64) and adjuster (65) in the valve group as shown. e. Install valve (66), spring (67) and piston (68) in adjuster (65) as shown. f. Install plunger assembly (63), the washer and nut (62) in the adjuster as shown. 20/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 22. Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL. NO WAITING NOTE: If there is no response to click on the link above, please download the PDF document first and then click on it.
  • 23. 23. Install main relief valve (61) in the main valve body. Tighten the main relief valve to a torque of 135 ± 10 N·m (100 ± 7 lb ft). 24. Install the O-ring seal on plug (60). Install plug (60) in the main valve body. Tighten the plug to a torque of 95 ± 14 N·m (70 ± 10 lb ft). 25. Assemble line relief valves (51) and (52). a. Install O-ring seal on the piston. b. Install two back-up rings (59) and O-ring seal (55) on the seat in the positions shown. c. Install O-ring seal (54) and back-up ring (53) on the valve in the positions shown. d. Install O-ring seal (58) on the adapter. e. Reassemble the line relief valves and as shown. 21/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 24. 26. Install line relief valves (51) and (52) in the main valve bodies as shown. Tighten the line relief valves to a torque of 95 ± 14 N·m (70 ± 10 lb ft). 27. Install O-ring seal (49) on plug (50). Install check valve (47), spring (48) and plug (50) in the main valve body. Tighten the plug to a torque of 200 ± 25 N·m (150 ± 18 lb ft). 28. Install the O-ring seal on plug (43). Install valve (46), spring (45) and sleeve bearing (44) in the main valve body as shown. Install plug (43). Tighten the plug to a torque of 200 ± 25 N·m (150 ± 18 lb ft). 22/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 25. 29. Install sleeves (41) and (42) in the main valve body as shown. 30. Install an O-ring seal on each plug (40). Install the plugs in the main valve bodies as shown. 31. Install the two check valves and five load check valves in the main valve bodies as follows: a. Install plunger (39) and spring (38) for each check valve and load check valve. 23/27 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWER... 2020/8/16 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...