Dart Valley Systems Catalogue

PRODUCT LIST
Codes and descriptions for the full DVS
& Franke product ranges

CONTENTS
WC Flushing 2 - 5
Urinal Controls 6 - 7
Automatic Taps 8 - 13
Push Taps 14
Showers & Bath Filling 15 - 17
Water Management 18
Washroom Hygiene 19
Safe Ensuites 20 - 27
Valves & Accessories 28
Franke Products 29 - 38
Franke Accessories 39 - 43
Franke EXOS 44 - 45
PAGE1 www.dartvalley.co.uk

WC Flushing
WC Flushing
Stylish and discreet, our range of no-
touch WC flushing options have tried
and tested designs, which deliver an
accurate and reliable performance.
WC Flushing
Code Number Description
WC Flushing Kits - Mains operated
WC03-002 WC Flushvalve kit with in-built overflow and wave-on sensor - 1 ½” base - C/W 3m cable
WC03-003 WC Flushvalve kit with in-built overflow and wave-on sensor - 2” base - C/W 3m cable
WC03-007 WC Flushvalve kit with in-built overflow and wave-on sensor - 1 ½” base - C/W 15m cable
WC03-008 WC Flushvalve kit with in-built overflow and wave-on sensor - 2” base - C/W 15m cable
WC03-012 WC Flushvalve kit with in-built overflow and wave-on sensor 50mm chrome bezel - 1 ½”
base - C/W 3m cable
WC03-013 WC Flushvalve Kit with in-built overflow and Programmable Sensor - 1 ½” base - Low voltage
version C/W mains PSU
WC03-014 WC Flushvalve Kit with in-built overflow and Programmable Sensor - 2” base - Low voltage
version C/W mains PSU
WC03-022 WC Flushvalve kit with in-built overflow and anti-vandal wave-on sensor - 1 ½” base - C/W
3m cable
WC03-028 WC Flushvalve kit with in-built overflow and tactile switch - 1 ½” base - C/W 3m cable
WC03-032 WC Flushvalve kit with in-built overflow and wave-on sensor - 1 ½” base - C/W 3m cable &
Manual overide kit
WC03-033 WC Flushvalve kit with in-built overflow and wave-on sensor - 2” base - C/W 3m cable &
Manual overide kit
WC03-036 WC Flushvalve kit with in-built overflow with dual wave-on sensors - 1 ½” base - C/W 3m
cable
WC03-037 WC Flushvalve kit with in-built overflow with dual wave-on sensors - 2” base - C/W 3m cable
WC03-040 WC Direct Flushing kit and wave-on sensor & ¾” BSP solenoid valve
WC Flushing Kits - Battery operated
WC03-050 WC Flushvalve Kit with in-built overflow and wave-on sensor - 1½” base C/W 3m cable & 6 x
C Cell batteries
WC03-051 WC Flushvalve Kit with in-built overflow and wave-on sensor - 2” base C/W 3m cable & 6 x C
Cell batteries
WC03-052 WC Flushvalve Kit with in-built overflow and programmable sensor - 1½” base C/W 3m ca-
ble & 6 x C Cell batteries
WC03-053 WC Flushvalve Kit with in-built overflow and programmable sensor - 2” base C/W 3m cable
& 6 x C Cell batteries
WC03-058 WC Flushvalve Kit with in-built overflow and wave-on sensor - 1½” base C/W 3m cable, 6 x
C Cell batteries & Manual override kit
WC03-059 WC Flushvalve Kit with in-built overflow and wave-on sensor - 2” base C/W 3m cable, 6 x C
Cell batteries & Manual override kit
WC03-060 WC Flushvalve Kit with in-built overflow and programmable sensor - 1½” base C/W 3m ca-
ble, 6 x C Cell batteries & Manual override kit
www.dartvalley.co.uk PAGE2

WC Flushing
WC03-061 WC Flushvalve Kit with in-built overflow and programmable sensor - 2” base C/W 3m cable,
6 x C Cell batteries & Manual override kit
WC03-070 WC Flushvalve Kit with in-built overflow and wave-on sensor - 1 ½” base C/W 3m cable &
Intelligent battery charger
WC03-071 WC Flushvalve Kit with in-built overflow and wave-on sensor - 2” base C/W 3m cable &
Intelligent battery charger
WC03-072 WC Flushvalve Kit with in-built overflow and programmable sensor - 1 ½” base C/W 3m
cable & Intelligent battery charger
WC03-073 WC Flushvalve Kit with in-built overflow and programmable sensor - 2” base C/W 3m cable
& Intelligent battery charger
Dual Flushing Plate Kit - 1 ½”
WC00-097 Full/half flush plate complete with 2 x tactile switches
WC01-022 Flushvalve with in-built overflow (valve only) - 1 ½” base
WC00-010 Control box for WC Flushvalves - Mains C/W 1.5m cable
Dual Flushing Plate Kit - 2”
WC00-097 Full/half flush plate complete with 2 x tactile switches
WC01-023 Flushvalve with in-built overflow (valve only) - 2” base
Kit Options
AC02-001 Standard wave-on sensor included in WC kits (excludes bezel) - C/W 3m cable
AC02-002 Standard wave-on sensor included in WC kits (excludes bezel) - C/W 15m cable
AC02-003 38mm chrome bezel for wave-on sensor - Normally used with 80mm backplate
AC02-005 50mm chrome bezel for wave-on sensor - Normally used on exposed cistern
AC02-037 Wall Mounted Brushed s/steel Programmable Sensor (WC) - dual flush
WC00-025 80mm chrome back plate with ‘Wave-on hand’ and DVS logo
AC02-009 38mm chrome wave on sensor pack C/W 3m cable
AC02-011 38mm chrome wave on sensor pack C/W DVS backplate & 3m cable
AC02-040 Anti-vandal wave-on sensor with 50mm s/steel bezel C/W 3m cable & Blue indication insert
AC02-043 Anti-vandal wave-on sensor with 50mm s/steel bezel C/W 15m cable & Blue indication
insert
AC02-046 Tactile switch with 50mm s/steel bezel C/W 3m cable & Blue indication insert
AC02-049 Tactile switch with 50mm s/steel bezel C/W 15m cable & Blue indication insert
WC00-024 80mm chrome back plate with ‘Wave-on hand’

WC Flushing
WC00-020 80mm chrome back plate - Blank
WC00-022 80mm chrome back plate - Full flush with ‘DVS logo’
WC00-023 80mm chrome back plate - Half flush with ‘DVS logo’
WC00-021 120mm s/steel disabled back plate (larger plate with larger type and graphics)
AC02-006 50mm s/steel bezel for wave-on sensor
AC02-060 Sensor thread extension for 70mm wall thickness
Individual Parts
WC00-006 Manual Override Wall Fitting, Plate and Sensor for WC
WC01-022 Flushvalve with in-built overflow (valve only) - 1 ½” base
WC01-032 Manual Override Flushvalve with in-built overflow (valve only) - 1 ½” base
WC01-033 Manual Override Flushvalve with in-built overflow (valve only) - 2” base
WC01-012 Flushvalve with in-built overflow (base only) - 1 ½” base
WC01-013 Flushvalve with in-built overflow (base only) - 2” base
WC01-002 Flushvalve replacement body
WC00-001 Flushvalve replacement s/steel piston and spring - suitable for all models
WC00-003 Flushvalve replacement spring only - suitable for all models
WC00-002 Flushvalve replacement s/steel piston and spring for manual override
WC00-011 Control box for WC Direct Flushing - Mains C/W 1.5m cable
WC00-008 Flushvalve control box for WC Flushvalves (V3 Battery) C/W 1.5m cable
WC00-012 Flushvalve control box for WC Flushvalves (Low Voltage Mains) C/W 1.5m cable
WC00-150 Flushvalve control box for WC Flushvalves (Battery box - without batteries)
WC00-155 Enclosure, Intelligent charger & battery pack
WC00-140 Set of 6 C Cell Batteries for Battery WC Flushvalve control box
Cisterns & Accessories
WC02-011 Concealed plastic cistern kit - 1 ½”
WC02-012 Concealed plastic cistern kit - 2”
WC02-001 Concealed plastic cistern - Cistern only - 1 ½”
WC02-002 Concealed plastic cistern - Cistern only - 2“
WC02-013 Concealed tall plastic cistern kit - 1 ½”
WC02-014 Concealed tall plastic cistern kit - 2”
WC02-003 Concealed tall plastic cistern - Cistern only - 1 ½”
WC02-004 Concealed tall plastic cistern - Cistern only - 2”
WC02-005 Concealed tall plastic cistern 2” with Float switch hole & modified lid
WC02-006 Compact Concealed Cistern with modified outlet to suit urinal flush pipework 22mm
WC02-007 Compact Concealed plastic cistern - 1 ½” Cistern and Lid only
WC02-017 Compact Concealed plastic cistern - 1 ½” Kit

WC Flushing
WC02-033 Side entry valve - individual (standard with cistern kits)
WC02-037 Side entry valve - individual (Breeam approved)
WC02-031 Standard 38mm flushpipe (430 x 430) - 1 ½” to 1 ½”
WC02-032 Standard 50mm to 38mm flushpipe (340 x 500) - 2” to 1 ½”
WC02-035 Back to pan connector for flush pipe
WC00-004 Toilet tank reduction bag
PP00-100 WC control system fuse - Primary - 20mm Glass 240V (T)100mA

urinal controls
Urinal Controls
Offering substantial water savings
and a short payback period, urinal
controls also ensure a clean and fresh
washroom.
Urinal Controls
Flushmatic Urinal Controls
UC01-001 Flushmatic surface mount kit in Grey - Battery C/W solenoid valve 0.5-8 BAR
UC01-005 Flushmatic surface mount kit in White - Battery C/W solenoid valve 0.5-8 BAR
UC01-014 Flushmatic surface mount kit in Grey - Mains C/W solenoid valve 0.5-8 BAR
UC01-017 Flushmatic surface mount kit in White - Mains C/W solenoid valve 0.5-8 BAR
UC01-007 Flushmatic surface mount kit with battery low indicator in Grey - Battery C/W solenoid valve
0.5-8 BAR
UC01-009 Flushmatic surface mount kit with battery low indicator in White - Battery C/W solenoid
valve 0.5-8 BAR
UC01-018 Flushmatic downlighter kit for suspended ceilings in White - Battery C/W solenoid valve 0.5-8
BAR
UC01-024 Flushmatic downlighter kit for suspended ceilings in White - Mains C/W solenoid valve 0.5-8
BAR
UC01-019 Pearl downlighter kit for suspended ceilings in White - Battery C/W solenoid valve 0.5-8 BAR
UC01-025 Pearl downlighter kit for suspended ceilings in White - Mains C/W solenoid valve 0.5-8 BAR
UC01-027 Pearl Solo downlighter kit for suspended ceilings in White - Mains C/W solenoid valve 0.5-8
BAR
Individual Urinal Control System
UC07-010 Urinal control system - 1 station kit - sensor C/W 3m cable & 50mm bezel
UC07-011 Urinal control system - 2 station kit - sensors C/W 3m cable & 50mm bezels
UC07-001 Urinal control system for 1 or 2 urinals (control box only)
AC17-009 12V DC Plastic valve - 12.7mm orifice - 0.2-8 BAR - 15mm Normally closed
PP00-100 Urinal control system fuse - Primary - 20mm Glass 240V (T)100mA
PP00-101 Urinal control system fuse - Secondary - TR5 (F)500mA
UC07-008 Urinal sensor pack 50mm brushed s/steel bezel C/W 3m cable
UC07-009 Urinal sensor pack 50mm chrome brass bezel C/W 3m cable
UC00-027 Infrared urinal sensor (price excludes bezel) C/W 3m cable
UC00-028 50mm chrome bezel for urinal control system sensor
UC00-029 50mm stainless steel bezel for urinal control system sensor (standard) Brushed

Urinal Controls
Individual Urinal Control System - Low Pressure Kit
UC07-001 Urinal control system for 1 or 2 urinals (control box only)
UC07-008 Urinal sensor pack 50mm brushed bezel C/W 3m cable
AC17-008 12V DC ASCO valve (SCXH262C90BW) 7.1mm orifice - 3W - 0-0.7 BAR - 15mm Brass Normally
closed
Programmable Sensor Package
AC02-023 Wall Mounted Brushed s/steel Programmable Sensor (Urinal)
AT00-002 Single station mains kit standard pressure - 1-6 BAR brass valve
AC01-001 Hand held programmer with case - For use with all DVS programmable sensors & taps
Urinal Sleeves and Cleaners
UC00-007 BioUrinal Sleeve installation kit - Biological - 1 ¼” BSP
UC00-008 BioUrinal Sleeve installation kit - Biological - 1 ½” BSP
UC00-017 BioUrinal Sleeve refill - Biological
UC00-009 ChemiUrinal Sleeve installation kit - Chemical - 1 ¼” BSP
UC00-010 ChemiUrinal Sleeve installation kit - Chemical - 1 ½” BSP
UC00-013 ChemiUrinal Sleeve refill - Chemical
UC00-011 Bio/Chemi Urinal Fitting - 1 ¼” BSP
UC00-012 Bio/Chemi Urinal Fitting - 1 ½” BSP
UC01-010 Timed urinal control system Battery c/w solenoid valve
UC01-011 Timed urinal control system Mains c/w solenoid valve
Accessories
UC00-006 Battery pack for Flushmatic urinal controls (with tails) - 6V
AT00-026 Battery pack for Pearl and overseas Flushmatic urinal controls (without tails) - 6V
UC00-016 Power supply for Pearl and Flushmatic urinal controls - 6V
UC00-021 Flushmatic printed circuit board
AC17-002 6V DC ASCO valve (H262602BW) 2mm orifice - 0-12 BAR - 15mm Brass latching
AC17-027 Valve latcher used for manually opening/closing ASCO latching valves
UC00-001 Air break (back flow preventer) 15mm/22mm - Prevents backflow to water supply
UC00-003 Auto-Syphon for urinal cisterns - 5 ½” x 1” BSP
UC00-004 Auto-Syphon for urinal cisterns - 5 ½” x 1 ¼” BSP
UC00-002 Auto-Syphon for urinal cisterns - 8” x 1 ½” BSP
UC00-014 10mm conversion kit - for connecting Vitra S-Line urinal bowl
UC00-024 Replacement fuse for Flushmatic - TR5 (T)1.6A
UC00-023 Replacement fuse for Pearl - TR5 (T)1.25A
UC01-020 Lid C/W fly lead and battery spring, with battery top for Pearl and Pearl Solo downlighters
UC01-021 Pearl Downlighter only
UC00-019 Replacement box for Flushmatic surface mount in Grey
UC00-018 Replacement box for Flushmatic surface mount in White

automatic taps
Automatic Taps
No-touch automatic taps and acces-
sories from DVS, incorporate state-of-
the-art technology, water efficiency
and reliability. Suitable for various
applications across commercial,
public and domestic sectors.
Automatic Taps - Tap spouts require separate mains/battery 1, 2 or 3 station kit
Tap Spouts
AT01-001 Classic tap spout only in chrome with pex tails
AT01-002 Classic tap spout only in chrome with copper tails
AT01-003 Classic tap spout only in chrome with s/steel tails
AT01-011 Classic Swan tap spout only in chrome with pex tails
AT01-012 Classic Swan tap spout only in chrome with copper tails
AT01-013 Classic Swan tap spout only in chrome with s/steel tails
AT02-001 Aquarius WM straight tap spout only in s/steel 150mm with pex tails
AT02-002 Aquarius WM straight tap spout only in s/steel 150mm with copper tails
AT02-003 Aquarius WM straight tap spout only in s/steel 150mm with s/steel tails
AT02-005 Aquarius WM straight tap spout only in polished s/steel 150mm with pex tails
AT02-006 Aquarius WM straight tap spout only in polished s/steel 150mm with copper tails
AT02-004 Aquarius WM straight tap spout only in s/steel 150mm with pex tails (for use with AT00-039
PALL filter, spout includes AT00-040 adaptor)
AT00-039 PALL filter for use with Aquarius WM filter tap

www.dartvalley.co.uk
AT03-001 Aquarius DM A32 tap spout only in s/steel with pex tails
AT03-002 Aquarius DM A32 tap spout only in s/steel with copper tails
AT03-003 Aquarius DM A32 tap spout only in polish s/steel with pex tails
AT03-004 Aquarius DM A32 tap spout only in polish s/steel with copper tails
AT03-011 Aquarius DM A45 tap spout only in s/steel with pex tails
AT03-012 Aquarius DM A45 tap spout only in s/steel with copper tails
AT03-013 Aquarius DM A45 tap spout only in polish s/steel with pex tails
AT03-014 Aquarius DM A45 tap spout only in polish s/steel with copper tails
AT03-021 Aquarius DM A45 Doc M tap spout only in s/steel with pex tails
AT03-022 Aquarius DM A45 Doc M tap spout only in s/steel with copper tails
AT03-023 Aquarius DM A45 Doc M tap spout only in polish s/steel with pex tails
AT03-024 Aquarius DM A45 Doc M tap spout only in polish s/steel with copper tails
AT03-031 Aquarius DM Short neck tap spout only in s/steel with pex tails
AT03-032 Aquarius DM Short neck tap spout only in s/steel with copper tails
AT03-033 Aquarius DM Short neck tap spout only in polish s/steel with pex tails
AT03-034 Aquarius DM short neck tap spout only in polish s/steel with copper tails
AT03-041 Aquarius DM high neck tap spout only in s/steel with pex tails
AT03-043 Aquarius DM high neck tap spout only in polish s/steel with pex tails
AT03-051 Aquarius DM short pillar tap in chrome spout only with pex tails
AT03-061 Aquarius DM tall pillar tap in chrome spout only with pex tails
Tap kits for use with above spouts
AT00-001 Single station battery kit standard pressure - 1-6 BAR brass valve
AT00-003 Two station mains kit standard pressure -1 - 6 BAR brass valve
AT00-004 Three station mains kit standard pressure - 1-6 BAR brass valve
AT00-005 Single station battery kit low pressure - 0.5-1 BAR brass valve
AT00-006 Single station mains kit low pressure - 0.5-1 BAR brass valve
AT00-007 Two station mains kit low pressure - 0.5-1 BAR brass valve
AT00-008 Three station mains kit low pressure- 0.5-1 BAR brass valve
AC17-047 Thermostatic mixing valve 4 in 1 - 15/22mm

AquariTherm™ Tap
MT04-001 AquariTherm™ Tap - Manual
AT04-001 AquariTherm™ Tap - Automatic c/w Std Mains Kit for 1-6 bar
AC06-001 AquariTherm™ Service kit - Thermostatic Cartridge
AC06-002 AquariTherm™ Service kit - Check Valves, Filter Cartridges & Outlet
AT04-011 AquariTherm Standard Mains Kit for 1-6 bar for use with automatic spout only
Tap Spouts (no electronics)
AT07-047 Aquarius WM tap spout only in brushed s/steel with no electronics - 140mm
AT07-051 Aquarius A45 DOC.M tap spout only in brushed s/steel with no electronics
AT07-052 Aquarius A45 DM tap spout only in brushed s/steel with no electronics
AT07-053 Aquarius Short Neck tap spout only in brushed s/steel with no Electronics
AT07-073 Aquarius High Neck tap spout only in brushed s/steel with no Electronics
AT07-046 Wall mounted fixed spout only (minimalistic) in polished chrome
AT07-075 Basin mounted spout only in polished chrome
AT07-076 Wall mounted fixed basin spout only in polished chrome
High Security Spouts (no electronics)
AT07-040 High Security WM tap spout only in brushed s/steel 45° (113mm long from top) c/w 5LPM
aerator
AT07-041 High Security WM tap spout only in brushed s/steel 30° (98mm long from top)
AT07-042 High Security WM tap spout only in brushed s/steel 30° - 80mm BSP
AT07-043 High security WM tap spout only in brushed s/steel 45º (113mm long from top) 200mm BSP
AT07-044 High security WM tap spout only in brushed s/steel 30° (98mm long from top) 200mm BSP
AT07-045 High security WM tap spout only in brushed s/steel 30° - 200mm BSP
AT07-056 Anti-ligature basin spout only in brushed s/steel (AC17-042 must be fitted after the solenoid
valve)
AC17-042 Restrictaflow In-Line Flow Restricting Valve - 15mm DVS - 2 LPM
AT07-057 Anti-ligature basin spout only in polished s/steel (AC17-042 must be fitted after the solenoid
valve)
AT07-058 45mm Anti-vandal tap spout only in brushed s/steel C/W 2 LPM and double check valve
AT07-059 55mm Anti-vandal bath spout only in brushed s/steel
EZ Tap spouts (316 Stainless Steel)
AT07-101 EZ-Spout™ Healthcare 90º Tap Spout (includes Spigot)
AT07-102 EZ-Spout™ 90º Tap Spout (includes Spigot) fitted with 5 LPM aerator
AT07-103 EZ-Spout™ 60º Tap Spout (includes Spigot) fitted with 5 LPM aerator
AT07-104 EZ-Spout™ Healthcare 60º Tap Spout (includes Spigot)
Individual Parts (316 Stainless Steel)
AT07-115 EZ-Spout™ Spigot only
AT07-116 EZ-Spout™ Healthcare 90º Tap Spout only
AT07-117 EZ-Spout™ 90º Tap Spout only
AT07-118 EZ-Spout™ 60º Tap Spout only
AT07-119 EZ-Spout™ Healthcare 60º Tap Spout only

Filter for use with AT07-102
AT00-044 Adaptor for PALL filter - for use with EZ-Spout™
AT00-039 PALL filter - for use with EZ-Spout™
Medi-Spouts (ABS with anti-microbial material)
AT07-105 Medi-Spout™ 90º Tap in Chrome (includes Spigot)
AT07-106 Medi-Spout™ 60º Tap in Chrome (includes Spigot)
AT07-107 Medi-Spout™ 90º Tap in Satin Chrome (includes Spigot)
AT07-108 Medi-Spout™ 60º Tap in Satin Chrome (includes Spigot)
Individual Parts (ABS with anti-microbial material)
AT07-130 Medi-Spout™ 90º in Chrome Tap Spout only
AT07-131 Medi-Spout™ 60º in Chrome Tap Spout only
AT07-132 Medi-Spout™ 60º in Satin Chrome Tap Spout only
AT07-133 Medi-Spout™ 90º in Satin Tap Spout only
AT07-129 Wall Spigot assembly - Includes o-rings & fasteners
Programmable Sensor (Requires mains or battery single / two station kit)
AC02-017 Wall mounted brushed s/steel programmable tap sensor
AC02-024 Wall mounted brushed s/steel programmable tap sensor - Blue insert (Cold)
AC02-025 Wall mounted brushed s/steel programmable tap sensor - Red insert (Hot)
Kits for use with Programmable Sensors
AT00-001 Single station battery kit standard pressure - 1-6 BAR brass valve
AT00-003 Two station mains kit standard pressure -1 - 6 BAR brass valve
AT00-005 Single station battery kit low pressure - 0.5 - 1 BAR brass valve
AT00-006 Single station mains kit low pressure - 0.5 - 1 BAR brass valve
AT00-007 Two station mains kit low pressure - 0.5 - 1 BAR brass valve
Tap 2-Channel Control System Kit - Mains
AT07-010 Tap control system - 1 station kit - Wave-on sensor with 50mm bezel
AT07-011 Tap control system - 2 station kit - Wave-on sensors with 50mm bezels
AT07-012 Tap control system - 1 station kit - Tactile switch with 50mm bezel
AT07-013 Tap control system - 2 station kit - Tactile switches with 50mm bezels
AT07-015 Tap control system - Wave-on sensor kit for use with DVS high security backplates
AT07-014 Tap control system - Tactile switch kit for use with DVS high security backplates

Tap Control System Kit - Battery
AT07-002 Tap control system for 1 or 2 taps (control box only) c/w 6 x AA Batteries
AT07-003 Tap control system for 1 or 2 taps (control box only) c/w 6 x C Cell Batteries
AC17-006 6v DC ASCO valve (SCXH210G202BW) 12.7mm orifice - 0.35-10 BAR - 15mm Brass latching
AC17-005 6v DC ASCO valve (H262605BW) 6.7mm orifice - 0-0.7 BAR - 15mm Brass latching
Individual Parts
AT07-001 Tap control system for 1 or 2 taps (control box only)
AC17-009 12v DC Plastic valve - 12.7mm orifice - 0.2-8 BAR - 15mm Normally closed
PP00-100 Tap control system fuse - Primary - 20mm Glass 240V (T) 100mA
PP00-101 Tap control system fuse - Secondary - TR5 (F)500mA
AC02-001 Wave-on sensor (price excludes bezel) - c/w 3m cable
AC02-008 Optional Red (Hot) indication washer for behind AC02-001 wave-on sensor bezel
AC02-007 Optional Blue (Cold) indication washer for behind AC02-001 wave-on sensor bezel
AC02-005 50mm chrome bezel for AC02-001 wave-on sensor
AC02-006 50mm s/steel bezel for AC02-001 wave-on sensor
AC02-041 Anti-vandal wave-on sensor with 50mm s/steel bezel c/w 3m cable & Red indication insert
AC02-040 Anti-vandal wave-on sensor with 50mm s/steel bezel c/w 3m cable & Blue indication insert
AC02-047 Tactile switch with 50mm s/steel bezel c/w 3m cable & Red indication insert
AC02-046 Tactile switch with 50mm s/steel bezel c/w 3m cable & Blue indication insert
Accessories
AT00-023 Touch free self-adhesive polythene label
AT00-012 Flow straightener 6 LPM - Black back
AT00-013 Flow straightener 5 LPM (Standard with all DVS taps) - Orange back
AT00-010 Flow straightener 3.5 lpm - Blue back
AT00-011 Flow straightener - Unrestricted
AT00-015 Flow straightener 4 LPM - Pink back
AT00-014 Flow straightener 3 LPM - Purple back
AT00-133 Flow straightener – Unrestricted - DVS (Hospital spec)
AT00-016 Pex hose - Standard length 500mm
AT00-018 Pex hose - Long length 1m
AT00-019 Pex hose - 15mm x 15mm extension hose
AT00-029 Single Earthed PSU for Automatic Taps
AC17-006 6V DC ASCO valve (SCXH210G202BW) 12.7mm orifice - 0.35-10 BAR - 15mm Brass latching
AC17-004 6V DC ASCO valve (H262604BW) 4mm orifice - 0-2 BAR - 15mm Brass latching
AT00-024 Automatic tap battery pack with box and lead
AT00-025 Automatic tap double battery pack with box and lead for extended life
AT00-026 Replacement single battery
AT00-037 Y splitter lead (for connecting to valve & power supply)

AT00-036 T-piece for multiple installations
AT00-033 Cable extension (1 metre)
PP00-001 Anti-rotation locking washers for taps
PP00-007 M6 x 12 s/steel Grub Screws Anti Rotation for deck mount tap bases
AT00-027 S/steel blanking plate (tap hole cover)
AT00-028 Chrome plastic blanking plate (tap hole cover)
AT00-038 Conversion kit for flexibles to copper tails - wall mounted only c/w 350mm length. Exposed
length of copper tail will vary according to tap model
AT00-124 Conversion kit for flexibles to s/steel tails - wall mounted only c/w 350mm length. Exposed
length of tail will vary according to tap model

Push Taps
A popular choice for high traffic areas,
push taps offer great value for money
and robust performance.
Push Taps
Push Taps
MT00-002 QK Push tap - Hot
MT00-001 QK Push tap - Cold
MT00-007 QL Lever clinic tap - Angled
MT00-004 QK WM push tap - Hot
MT00-003 QK WM push tap - Cold
MT00-006 QK Extended WM push tap - Hot
MT00-005 QK Extended WM push tap - Cold
AC02-066 Thread extension for WM push taps - 100mm wall thickness
Accessories
MT00-019 Replacement cartridge for MT00-001/002 taps
MT00-021 Replacement cartridge for MT00-007 QL tap
PP00-001 Anti-rotation locking washers for taps
PP00-110 Flanged cast brass nut - ½” BSP
PP00-111 Flanged cast brass nut - ¾” BSP
AT00-027 S/steel blanking plate (tap hole cover)
AT00-028 Chrome plastic blanking plate (tap hole cover)
PUSH TAPS

Showers & Bath Filling
A selection of sensors, control systems,
shower heads and spouts for hygienic
and water efficient showering and
bath filling.
Shower Towers - Non-electronic
SH01-001 Standard tower with High Security showerhead - Push (Auto Close)
SH01-013 Standard tower with High Security showerhead - Dual Outlet c/w hose & handset (Note:
Fitted with TMV2 shower valve)
SH01-008 Ceiling height tower with High Security showerhead - Push (Auto Close)
SH01-004 Ceiling height TMV3 tower with High Security showerhead - Push (Auto Close)
Shower Towers - Mains
SH01-002 Standard tower with High Security showerhead - Wave-on - Mains
SH01-060 Standard tower with High Security showerhead - Programmable Sensor - Mains
SH01-003 Standard tower with High Security showerhead - Tactile - Mains
SH01-009 Ceiling height tower with High Security showerhead - Wave-on - Mains
SH01-062 Ceiling height tower with High Security showerhead - Programmable Sensor - Mains
SH01-010 Ceiling height tower with High Security showerhead - Tactile - Mains
SH01-006 Ceiling height TMV3 tower with High Security showerhead - Wave-on - Mains
SH01-061 Ceiling height TMV3 tower with High Security showerhead - Programmable Sensor - Mains
SH01-005 Ceiling height TMV3 tower with High Security showerhead - Tactile - Mains
SH01-011 Ceiling height TMV3 tower with shower kit consisting rail, hose and head - Mains
Shower Towers - Battery
SH01-063 Standard tower with High Security showerhead - Wave-on - Battery
SH01-064 Standard tower with High Security showerhead - Programmable Sensor - Battery
SH01-065 Standard tower with High Security showerhead - Tactile - Battery
SH01-066 Ceiling height tower with High Security showerhead - Wave-on - Battery
SH01-067 Ceiling height tower with High Security showerhead - Programmable Sensor - Battery
SH01-068 Ceiling height tower with High Security showerhead - Tactile - Battery
SH01-069 Ceiling height TMV3 tower with High Security showerhead - Wave-on - Battery
SH01-070 Ceiling height TMV3 tower with High Security showerhead - Programmable Sensor - Battery
SH01-071 Ceiling height TMV3 tower with High Security showerhead - Tactile - Battery
SH01-072 Ceiling height TMV3 tower with shower kit consisting rail, hose and head - Battery
Programmable Sensor Package
SH07-040 High security showerhead - 30° (80mm long from top)
AC02-033 Wall Mounted Brushed Stainless Steel Programmable Sensor (Shower) - Red insert
AC01-001 Hand held programmer C/W case - For use with all DVS programmable sensors & taps
showers & bath filling

Product Code Description
Showerheads & Fixing Plates
SH07-040 High security showerhead - 30° (80mm long from top)
SH07-066 High security showerhead - 30° (80mm long from top) c/w 200mm BSP
SH07-042 High security showerhead - Ceiling mounted
SH07-084 Shower Head with Detachable Hose Connection - Includes Hose & Head
SH00-024 Replacement loose white rings for the above showerheads
SH00-060 Shower insert set - Anti-microbial
SH00-020 Showerhead flow reducer insert - Reduces to 8 LPM
SH07-067 Vandal resistant prison shower head
SH07-068 Vandal resistant standard shower head
SH07-069 Bottom entry extended shower arm
SH07-070 Rub clean shower head
SH07-052 Backplate for securing SH07-042 ceiling mounted showerhead
SH07-041 Oval fixing plate suitable for SH07-040, shower sensor and blending valve adjuster
SH00-019 Showerhead with rail and handset
SH07-085 WM High Security ABS Dome Showerhead in Chrome finish - Anti-microbial material
SH07-086 WM High Security ABS Sloped Showerhead in Chrome finish - Anti-microbial material
SH07-090 WM High Security ABS Dome Showerhead in Brushed Satin finish - Anti-microbial material
SH07-091 WM High Security ABS Sloped Showerhead in Brushed Satin finish - Anti-microbial material
Medi-Shower™ Individual Parts
SH07-074 Medi-Shower™ Hose
SH07-075 Medi-Shower™ Shower head
SH07-076 Medi-Shower™ Insert
SH07-077 Medi-Shower™ Key - Red
SH07-089 Medi-Shower™ Key - Green
MS00-001 Medi-Shower™ sloped head (includes 4 inserts)
MS00-002 Medi-Shower™ domed head (includes 4 inserts)
Medi-Shower™ & Hose
SH07-073 Medi-Shower™ & Hose kit
Medi-Shower™ Control Kits
SH07-081 Medi-Shower™ control 1 year plan - Medi-showers & hose - 4 colour coded inserts per unit
- 1 colour coded wall chart per unit - Optional free post return for disposal of inserts - War-
ranty 1 year
SH07-080 Medi-Shower™ control 3 year plan - Medi-showers & hose -12 colour coded inserts per unit
- 1 colour coded wall chart per unit - Optional free post return for disposal of inserts - War-
ranty 3 years
SH07-082 Medi-Shower™ control 5 year plan - Medi-showers & hose - 20 colour coded inserts per unit
- 1 colour coded wall chart per unit -Optional free post return for disposal of inserts - War-
ranty 5 years

Shower Push Taps
MT00-010 QL WM shower push tap (Auto Close) - Top inlet
MT00-011 QL WM shower push tap (Auto Close) - Back inlet
MT00-023 WM concealed push tap for showers
MT00-020 Replacement cartridge for shower push taps (20 - 25 secs)
Temperature Blending Valve
SH00-011 Temperature blending valve adjuster - for 1.5mm to 22mm wall thickness
SH00-012 Temperature blending valve adjuster - for 180mm wall thickness
SH00-013 Temperature blending valve adjuster - for 280mm wall thickness
Bath Filling
VR01-024 High-security bath filling backplate (not including sensors)
SH07-043 High Security WM bath spout 45° (113mm long from top) c/w unrestricted aerator AT00-011
SH07-054 Bath filling plate with full/half fill indication - Plate only. 2 x tactile switches required
SH07-055 Bath filling plate with warm/cold indication - Plate only. 2 x tactile switches required
Control Systems
SH07-010 Shower control system - 1 station kit - Wave-on sensor c/w 8m cable
SH07-011 Shower control system - 2 station kit - Wave-on sensors c/w 8m cable
SH07-012 Shower control system - 1 station kit - Tactile switch with 50mm bezel c/w 8m cable
SH07-013 Shower control system - 2 station kit - Tactile switches with 50mm bezels c/w 8m cable
SH07-001 Shower control system for 1 or 2 showers (control box only)
SH07-020 Bath control system - For use with bath filling plates & bath spouts (control box only)
AC17-009 12v DC Plastic valve - 12.7mm orifice - 0.2-8 BAR - 15mm Normally closed
PP00-100 Shower/Bath control system fuse - Primary - 20mm Glass 240V (T) 100mA
PP00-101 Shower/Bath control system fuse - Secondary - TR5 (F)500mA
SH00-001 Wave-on shower sensor with 50mm s/steel bezel c/w 8m cable
SH07-002 Shower control system for 1 or 2 showers (control box only) c/w 6 x AA Batteries
SH07-003 Shower control system for 1 or 2 showers (control box only) c/w 6 x C Cell Batteries
SH07-021 Bath control system for 1 or 2 baths (control box only) c/w 6 x AA Batteries
SH07-022 Bath control system for 1 or 2 baths (control box only) c/w 6 x C Cell Batteries
VR00-002 Wave-on sensor for backplates with Red insert (Hot) c/w 3m cable
VR00-001 Wave-on sensor for backplates with Blue insert (Cold) c/w 3m cable
SH07-053 Shower push control plate - Plate only. 1 x tactile switch required
AC02-052 Tactile switch with 38mm bezel for use with control plates - Individual c/w 3m cable

water management
Water Management
DVS offer a range of water manage-
ment products to help save water,
money and timely maintenance visits.
Water Management
Overflow Detection Control System
AC07-001 Overflow detection control system - control box only (for up to 20 cisterns)
AC07-002 Float switch - individual
AC07-004 Overflow detection control system - s/steel overflow warning light panel - Single
PP00-103 Replacement fuse for Overflow detection control system - 20mm Glass (T)50mA
Restrictaflow Valve
AC17-039 Restrictaflow in-line flow restricting valve - 15mm
Water Isolation Kit
AC04-002 Water isolation system kit with 1 x 15mm latching valve - Battery
AC04-008 Water isolation system kit with 1 x 15mm latching valve - Mains
AC04-003 Water isolation system kit with 2 x 15mm latching valves - Battery
AC04-009 Water isolation system kit with 2 x 15mm latching valves - Mains
AC04-004 Water isolation system kit with 1 x ¾” BSP latching valve - Battery
AC04-010 Water isolation system kit with 1 x ¾” BSP latching valve - Mains
AC04-005 Water isolation system kit with 2 x ¾” BSP latching valve - Battery
AC04-011 Water isolation system kit with 2 x ¾” BSP latching valve - Mains
Individual parts
AC04-001 Water isolation control box only - Battery
AC04-007 Water isolation control box only - Mains
AC17-013 Plastic Solenoid Valve (12V) 22mm for water isolation kit
AC04-026 Remote Sensor for isolation unit - Downlighter
AC04-015 Remote Sensor for isolation unit - Grey Surface Mount

washroom hygiene
Washroom Hygiene
From soap dispensers and refills to
baby changing stations, our washroom
hygiene products cater for a range of
applications.
Washroom Hygiene
Soap Dispenser - Standard
AC00-030 Automatic soap dispenser - Stainless steel
AC00-037 Automatic soap dispenser - White ABS
AC00-032 Standard washroom soap re-fill - 800ml
AC00-033 Empty bottle replacement C/W nozzle
PP00-105 AA Battery
AC00-038 Replacement key for AC00-030 soap dispenser
Soap Dispenser - Classic
SD01-001 Automatic Wall mounted soap dispenser - Chrome finish
SD01-005 Automatic Wall mounted soap dispenser - Nickel Brushed finish
SD01-002 Automatic Swan soap dispenser - Chrome finish
SD01-007 Automatic Swan soap dispenser - Nickel Brushed finish
SD01-003 Automatic Pillar soap dispenser - Chrome finish
SD01-008 Automatic Pillar soap dispenser - Nickel Brushed finish
Baby Change Units
AC00-040 Baby-minder - Horizontal changing station - Light Granite
AC00-041 Baby-minder - Horizontal changing station - White

safe ensuites
Safe Ensuites
The impressive DVS Safe Ensuite range
has been designed and developed for
high security applications, including;
mental healthcare, custodial and more.
Safe Ensuites
Sanitaryware
VR01-031 High security basin with integrated backplate with single spout (not including sensors) c/w
high security waste grid
VR01-005 High security basin and backplate (not including sensors)
VR01-030 High security basin with integrated backplate (not including sensors) c/w high security
waste grid
VR01-001 High security basin only (without backplate)
VR01-027 Replacement rubber bung/plug for waste outlet
VR01-028 Waste grid for use with DVS high security basin
VR01-032 Waste grid for use with DVS high security basin with integrated backplate
VR01-002 High security backplate (not including sensors)
VR01-003 High security low backplate (not including sensors)
VR01-023 High security backplate for use with standard ceramic basins (not including sensors)
VR01-024 High security bath filling backplate (not including sensors)
VR01-004 Extended high security backplate with moulded shelf (not including sensors)
VR00-005 Push sensor for backplates with Blue insert (Cold) c/w 3m cable
VR00-006 Push sensor for backplates with Red insert (Hot) c/w 3m cable
VR00-040 Push sensor for backplates with blue insert (Cold) c/w 8m cable
VR00-041 Push sensor for backplates with red insert (Hot) c/w 8m cable
VR01-025 High security mirror with moulded frame
VR01-026 High security soap dish
VR01-037 High security mirror with moulded shelved surround
VR00-010 Structural adhesive for securing mirrors and soap dishes
VR01-010 High security WC pan (floor mount back-to-wall)
VR01-034 High security WC pan (floor mount back-to-wall) Blue Top (RAL 5011 Blue)
VR01-016 Wall Mounted WC Seat. This kit is intended to be fixed through the wall to enable the seat
to be safely removed- not to be attached to the pan.
VR01-011 Disabled High security WC pan (floor mount back-to-wall) 60mm higher
VR01-035 Disabled High security WC pan (floor mount back-to-wall) 60mm higher - Blue Top (RAL
5011 Blue)

Safe Ensuites
VR01-013 Side in-fill for high security WC pan - Left side
VR01-014 Side in-fill for high security WC pan - Right side
VR01-046 High security WC pan (floor mount back-to-wall) with double in-fills
VR01-012 Disabled WC pan white enameled steel spacer box - Optional extra
VR01-017 High security wall hung WC pan
VR01-036 High Security wall hung WC pan - Blue Top (RAL 5011 Blue)
VR01-018 Bracket for wall hung WC pan (pair of brackets, only required if installing on to IPS)
High Security Basins - For use with Programmable Sensors
waste grid
VR01-039 High security basin with integrated backplate with single spout (not including sensors) c/w
high security waste grid
VR01-048 High security backplate (not including sensors)
VR01-049 High security low backplate (not including sensors)
VR01-050 Extended high security backplate with moulded shelf (not including sensors)
VR01-051 High security basin and backplate (not including sensors)
VR01-052 High security backplate for use with standard ceramic basins (not including sensors)
VR01-053 High security bath filling backplate (not including sensors)
waste grid
Control Systems, Sensors and WC Flushing
VR07-004 Standard washroom control system kit - For use with DVS high security backplates
VR07-003 Washroom control system kit - For when DVS high security backplates are not being used
VR07-002 Washroom control system - Control box only
VR07-001 Washroom control box for direct flushing
PP00-102 Replacement fuse for washroom control system - 20mm Glass (T) 160mA
AC02-041 Anti-vandal wave-on sensor with 50mm s/steel bezel c/w 3m cable & Red indication insert
WC01-023 WC Flushvalve with in-built overflow (valve only) - 2” base
WC02-014 Concealed tall plastic cistern kit - 2” kit

Safe Ensuites
Showerheads and Accessories
SH07-040 High security showerhead - 30° c/w 60mm ½” BSP (suitable for panels up to 25mm thick)
SH07-066 High security showerhead - 30° c/w 200mm ½” BSP (suitable for walls up to 150mm thick)
SH00-024 Replacement loose white rings for the above showerheads
SH07-042 High security showerhead - Ceiling mounted
SH07-052 Backplate for securing SH07-042 ceiling mounted showerhead
SH07-041 Oval fixing plate suitable for SH07-040, shower sensor and blending valve adjuster
High Secruity Tap spouts
AT07-055 High security tap nozzle - Basin mounted (AC17-054 recommended to be fitted after sole-
noid valve)
AT07-054 High security tap nozzle - s/steel mounted (AC17-054 recommended to be fitted after
solenoid valve)
AC02-056 Tap nozzle thread extension for 100mm wall thickness
Key Switches
AC04-018 Water control key switch kit - 12V DC
AC04-016 Water control key switch (with 5m cable)
AC04-019 Water control key switch - Two valve - 12V DC
AC04-017 Key switch for 2 channel control C/W 5m cable
Anti-Pick Sealant
VR00-012 Anti-pick sealant with nozzle - In White - 250ml
VR00-013 Replacement nozzle for anti-pick sealant
VR00-010 Structural adhesive for mirrors
VR00-011 Special twin gun (only required for structural adhesive)
Basin Fixing Kits
VR01-006 Basin/backplate fixing kit for 100mm wall thickness
Showerhead & Sensor Extensions
AC02-056 Sensor or showerhead thread extension for 100mm wall thickness
WC Pan Fixing Kit
VR01-021 WC pan fixing kit for 250mm wall thickness (supplied as standard with WC pan)

Safe Ensuites
Accessories
VR01-054 Ligature Resistant Coat Hook
VR01-055 Ligature Resistant Toilet Paper Holder
VR01-056 Safe Dispense Ligature Resistant Back Plates - Small
VR01-057 Safe Dispense Ligature Resistant Back Plates - Medium
VR01-058 Safe Dispense Ligature Resistant Back Plates - Large
VR01-059 Stell Ventilation Grill Frame Housing 150mm x 150mm
VR01-067 Ligature Resistant Shower Shelf
VR01-068 Door Pull Handle on Plate - 450mm Long
VR01-069 Door Pull Handle on Plate - 600mm Long
Ensuite Package 1 - High Risk (Excluding Shower)
waste grid
VR07-004 kit breakdown:
AC17-009 12V DC Plastic valve - 12.7mm orifice - 0.2-8 BAR - 15mm Normally closed (x2)
WC02-014 Concealed tall plastic cistern kit - 2”
AC17-047 Thermostatic mixing valve 4 in 1 - 15/22mm (for basin)
Ensuite Package 2 - High Risk (Including Shower)
waste grid
AC02-040 Anti-vandal wave-on sensor with 50mm s/steel bezel c/w 3m cable & Blue insert

Safe Ensuites
AC17-009 12v DC Plastic valve - 12.7mm orifice - 0.2-8 BAR - 15mm Normally closed (x2)
SH07-040 High security showerhead - 30°
AC17-009 12V DC Plastic valve - 12.7mm orifice - 0.2-8 BAR - 15mm Normally closed (for shower)
AC17-047 Thermostatic mixing valve 4 in 1 - 15/22mm (for shower)
Ensuite Package 3 - Low Risk (Excluding Shower)
SW00-002 Standard ceramic WC pan (includes fixings)
SW00-001 Seat and cover only for ceramic WC pan
waste grid
Ensuite Package 4 - Low Risk (Including Shower)
SW00-002 Standard ceramic WC pan (includes fixings)
SW00-001 Seat and cover only for ceramic WC pan
waste grid

Safe Ensuites
Ensuite Package 1 - High Risk (Excluding Shower) Wall Hung Pan
VR01-018 Bracket for Wall Hung Pan without powder coating (pair of brackets, only required if install-
ing on to IPS)
waste grid
Ensuite Package 2 - High Risk (Including Shower) Wall Hung Pan
VR01-018 Bracket for Wall Hung Pan without powder coating (pair of brackets, only required if install-
ing on to IPS)
waste grid
AC17-009 12v DC Plastic valve - 12.7mm orifice - 0.2-8 BAR - 15mm Normally closed (for shower)

Safe Ensuites
Ensuite Package 1 - High Risk (Excluding Shower) Tactile
waste grid
AC17-009 12v DC Plastic valve - 12.7mm orifice - 0.2-8 BAR - 15mm Normally closed (for basin) x2
Ensuite Package 2 - High Risk (Including Shower) Tactile
waste grid
AC17-009 12V DC Plastic valve - 12.7mm orifice - 0.2-8 BAR - 15mm Normally closed (for basin) x 2
Ensuite Package 2 - High Risk (Including Shower) Programmable Sensors
WC
AC02-037 Wall Mounted Brushed s/steel Programmable Sensor (WC)
WC00-012 Low Voltage Flushvalve control box supplied with mains PSU
Basin
VR01-047 High security basin with integrated backplate (dual spout programmable sensor) c/w high
security waste grid
AC02-024 Wall Mounted Brushed s/steel Programmable Sensor (Tap) - Blue insert
AC02-025 Wall Mounted Brushed s/steel Programmable Sensor (Tap) - Red insert
AT00-003 Two station mains kit standard pressure - 1-6 BAR

Safe Ensuites
Shower
AC02-033 Wall Mounted Brushed s/steel Programmable Sensor (Shower) - Red insert
AT00-002 Single station mains kit standard pressure - 1-6 BAR
Ensuite Basin & Backplate only package
waste grid
AT07-015 Tap control system - Wave-on sensor kit for use with DVS high security backplates
AT07-015 Kit Breakdown:
AT07-001 Tap control system - control box only
VR00-002 Wave-on sensor for backplates with Red insert (Hot) - c/w 3m cable
VR00-001 Wave-on sensor for backplates with Cold insert (Cold) - c/w 3m cable
Ensuite Basin & Backplate only Package - Programmable
VR01-047 High security basin with integrated backplate (dual spout programmable sensor) c/w high
security waste grid
AC02-024 Wall Mounted Brushed s/steel Programmable Sensor (Tap) - Blue insert
AC02-025 Wall Mounted Brushed s/steel Programmable Sensor (Tap) - Red insert
AT00-003 Two station mains kit standard pressure - 1-6 BAR

Valves & Accessories
DVS also offer a wide range of parts
for various applications including;
solenoid valves, TMV’s, Y-strainers
and more.
valves & accessories
www.dartvalley.co.uk PAGE 28
Valves & Accessories
Valves
SH00-010 Temperature blending valve - 15mm
AC17-039 Restrictaflow in-line flow restricting valve - 15mm
AC17-038 Isolating valve - 15mm
AC03-019 Standard Y-strainer compression - 15mm
AC17-041 15mm Double Check valve
Standard latching valves
AC17-001 6v DC ASCO valve (H262601BW) 1.2mm orifice - 0-12 BAR - 15mm Brass latching
AC17-002 6v DC ASCO valve (H262602BW) 2mm orifice - 0-12 BAR - 15mm Brass latching
AC17-003 6v DC ASCO valve (H262603BW) 3.2mm orifice - 0-3 BAR - 15mm Brass latching
AC17-004 6v DC ASCO valve (H262604BW) 4mm orifice - 0-2 BAR - 15mm Brass latching
AC17-005 6v DC ASCO valve (H262605BW) 6.7mm orifice - 0-0.7 BAR - 15mm Brass latching
AC17-006 6v DC ASCO valve (SCXH210G202BW) 12.7mm orifice - 0.35-10 BAR - 15mm Brass latch-
ing
AC17-017 Replacement diaphragm for AC17-006 valve
AC17-018 6v DC ASCO valve (SCXE210D095BW) 19mm orifice - 0.35-6 BAR ¾” BSP Female Brass
latching
Special applications
AC17-007 12v DC ASCO valve (SCXH262C202BW) 4mm orifice - 3W - 0-2 BAR - 15mm Brass Nor-
mally closed
AC17-008 12v DC ASCO valve (SCXH262C90BW) 7.1mm orifice - 3W - 0-0.7 BAR - 15mm Brass
Normally closed
AC17-021 12v DC ASCO valve (SCX210G202BW 26072) 12.7mm orifice - 3W - 0.5-3 BAR - 15mm
Brass Normally Closed
AC17-024 12v DC ASCO valve (SCX210D95BW 12 DC) 19mm orifice - 0.35-6 BAR - ¾” BSP Female
AC17-023 12v DC ASCO valve (SCE238D004-029) 20mm orifice - 0.5-8 BAR - ¾” BSP Female Brass
Normally Closed
AC17-025 12v DC ASCO valve (SCXE210D004E 26247) 25mm orifice - 0.35-3 BAR - 1” BSP Female
AC17-027 Valve latcher used for manually opening/closing ASCO latching valves
Plastic valves
AC17-009 12V DC Plastic valve - 12.7mm orifice - 0.2-8 BAR - 15mm Normally closed
AC17-010 6V DC Plastic valve - 10.8mm orifice - 0.2-8 BAR - 15mm Latching

FRANKE
The Franke products range includes;
push and electronic taps, flush controls,
coin operated water delivery system,
showers, spare parts and more.
franke
FRANKE Products
Taps
AQRE130 Aqua Protronic battery operated dual feed with mixer lever. Non-return valves in-built to flexi tails.
AQRE132 Aqua Protronic battery operated dual feed with concealed lever. Non-return valves in-built to
flexi tails. (See special offers)
AQRE131 Aqua Protronic battery operated mono feed. Non-return valves in-built to flexi tails.
AQRE133 PROTRONIC-C mains-supplied washbasin mixer with touch-free operation. Non-return valves in-built
to flexi tails.
AQUA130 Protronic-S mixer tap with battery operation. Non-return valves in-built to flexi tails.
AQUA131 Protronic-S tap for pre-mix water c/w battery
AQUA134 Protronic-S mixer tap with electrical operation. Non-return valves in-built to flexi tails.
AQUA135 Protronic-S tap with pre-mix, electrical operation. Non-return valves in-built to flexi tails.
AQRM905UK Wall Mounted Spout 234mm Extd Thread
AQUA109 Washbasin sensor and solenoid valve
AQUA203 AQUALINE-C self-closing pillar tap for connecting to cold water (Minimum water pressure 1 BAR)
AQUA203L Aqualine-C Self Closing Low Pressure - With dynamic water pressure between 0.5 and 1 bar (for
connecting to cold water). Non-return valves in-built to flexi tails.
AQUA213 AQUALINE-C self-closing pillar tap for connecting to cold water with anti-blocking system (ABS)
Comes complete with Red Indices. (Minimum water pressure 1 BAR)
AQUA203W AQUALINE-C self-closing pillar tap for connecting to pre-mixed warm water Comes complete with
Red Indices. (Minimum water pressure 1 BAR)
AQUA203WL Aqualine-C Self closing low pressure pillar tap - With dynamic water pressure between 0.5 and 1 bar
(for connecting to pre-mixed warm water). Non-return valves in-built to flexi tails.
AQUA213W AQUALINE-C self-closing pillar tap for connecting to pre-mixed warm water with anti-blocking system
(ABS) Comes complete with Red Indices. (Minimum water pressure 1 BAR)
AQUA201 AQUALINE-S self-closing pillar tap for connecting to cold water (Minimum water pressure 1 BAR)
AQUA211 AQUALINE-S self-closing pillar tap for connecting to cold water with anti-blocking system (ABS)
(Minimum water pressure 1 BAR) (See special offers)
AQUA201W AQUALINE-S self-closing pillar tap for connecting to pre-mixed warm water. Comes complete with
Red Indices (Minimum water pressure 1 BAR)
AQUA211W AQUALINE-S self-closing pillar tap for connecting to pre-mixed warm water with anti-blocking system
(ABS) (Minimum water pressure 1 BAR)
AQUA202 AQUAMIX-C Self closing single mixer (with connecting hoses) with dynamic water pressure above 1
bar. Non-return valves in-built to flexi tails.
AQUA202L AQUAMIX-C Self Closing Low Pressure (with connecting hoses) with dynamic water pressure between
0.5 and 1 bar. Non-return valves in-built to flexi tails.

FRANKE Products
AQUA212 AQUAMIX-C Self closing single mixer with ABS function (with connecting hoses) Non-return valves in-
built to flexi tails.
AQUA202P AQUAMIX-C Self closing single mixer (with connecting copper tails)
AQUA212P AQUAMIX-C Self closing single mixer (with connecting copper tails) with ABS function
AQUA200 AQUAMIX-S Self closing single mixer (with connecting hoses). Non-return valves in-built to flexi tails.
(With new valve & with option for connecting to ZAQFT0006 hygiene box)
AQUA210 AQUAMIX-S Self closing single mixer (with connecting hoses) with ABS function. Non-return valves in-
built to flexi tails. (With new valve & with option for connecting to ZAQFT0006 hygiene box)
ZAQFT0006 Optional Hygiene unit for use with new versions AQUA200 & AQUA210
AQUA200P AQUAMIX-S Self closing single mixer (with connecting copper tails)
AQUA210P AQUAMIX-S Self closing single mixer (with connecting copper tails) with ABS function
AQRM271 AQUAMIX self closing single mixer wall mounted 173mm projection. Non-return valves in-built to flexi
tails. (See special offers)
AQRM272 AQUAMIX self closing single mixer wall mounted 233mm projection. Non-return valves in-built to flexi
tails.
AQUA205 AQUALINE-S self-closing bib tap for connecting to cold water. (Minimum water pressure 1 BAR)
AQUA215 AQUALINE-S self-closing bib tap for connecting to cold water with anti-blocking system (ABS)
(Minimum water pressure 1 BAR) (See special offers)
AQUA205W AQUALINE-S self-closing bib tap for connecting to pre-mixed warm water. Comes complete with Red
Indices. (Minimum water pressure 1 BAR)
AQUA215W AQUALINE-S self-closing bib tap for connecting to pre-mixed warm water with anti-blocking system
(ABS) Comes complete with Red Indices. (Minimum water pressure 1 BAR)
Z-AQUA002 Extension Adapter 30mm
Z-AQUA003 Rosette for compensating length for valve alignment function for covering gaps for use with
Aqualine-S Tap
Z-AQUA094 Compact Power Supply AQUA 3000 Open
AQRM905 Wall Mounted Spout 234mm projection (Up to 8mm thick panel)
AQRM910 Twist Proof Set 8955 00 20
AQUA102 Protronic Mixer Tap (for AQUA 3000 Open Connection). Non-return valves in-built to flexi tails.
AQUA103 Protronic Single Feed Tap (for AQUA 3000 Open Connection). Non-return valves in-built to flexi
tails.
PRTRS0008 PROTRONIC-S washbasin mixer with temperature lever, 230v AC (Replaces by AQUA132)
PRTR0017 Touch-free, time-controlled electronic on-wall mounted wash tap - 200mm
PRTR0018 Touch-free, time-controlled electronic on-wall mounted wash tap - 160mm
ZPRTR0001 Remote control for use with PRTR0018 & PRTR0017
AQUAFIT
AQFT0001 AQUAFIT single lever mixer with connecting hoses
AQFT0002 AQUAFIT single lever mixer with connecting pipes
AQFT0017 AQUAFIT single lever mixer with connecting hoses, with thermostatic scald-protection (Not TMV3
approved) (Replaces AQFT0003)
AQFT0004 AQUAFIT single lever mixer with connecting pipes, with thermostatic scald-protection (Not TMV3
approved)
ZAQFT0001 Hygiene unit for AQUAFIT single lever mixer with connecting hoses
ZAQFT0002 Hygiene unit for AQUAFIT single lever mixer with connecting pipes

FRANKE Products
EPRTRS0024 AC adapter plug (replaces ZPRTRS0001)
ZAQCT0001 Power supply for installation in the wall
ZAQUA091 Remote control for PROTRONIC / -C / -S AQUACONTACT and AQUAFIT hygiene unit
ZAQUA007 Power Supply for UK
AQUALINE-Therm self-closing thermostatic mixer for wash facilities
AQLT0039 AQUALINE-Therm - self-closing thermostatic mixer for wash facilities, 176 mm
PROTRONIC-T electronic wash taps
PRTR0002 PROTRONIC-T washbasin tap with 6V battery
PRTR0003 PROTRONIC-T washbasin mixer with 6V battery
PRTR0004 PROTRONIC-T washbasin mixer with concealed mixing, 6V battery
PRTR0005 PROTRONIC-T washbasin tap, 230V AC
PRTR0006 PROTRONIC-T washbasin mixer, 230V AC
PRTR0007 PROTRONIC-T washbasin mixer with concealed mixing, 230V AC
PRTR0008 PROTRONIC-T washbasin mixer for open low-level hot water heater, 230V AC
PRTR0009 PROTRONIC-T washbasin mixer with 5 l low-level hot water heater, 230V AC
AQRE915 Extension cable 3 m
AQUACONTACT washbasin fitting / PROTORNIC-T - A3000 open wash tap
AQCT0043 Finished installation kit AQUACONTACT washbasin fitting
AQCT0044 Basic installation kit AQUACONTACT washbasin fitting
ZAQCT0003 Battery compartment
AQRE915 Extension cable 3 m
PR3O0002 PROTRONIC-T AQUA 3000 open washbasin tap, 24V DC
PR3O0003 PROTRONIC-T AQUA 3000 open washbasin mixer, 24V DC
Ready-to-connect tap units for 2 to 6 wash places
AQFU0001 Ready-to-connect tap unit for 2 wash places 600 mm
AQFT0007 AQUAFIT single lever mixer with thermostatic scald-protection for tap unit

FRANKE Products
AQFT0005 AQUAFIT single lever mixer for tap unit
AQMXS0002 AQUAMIX-S self-closing mixer for tap unit
Ready-to-connect tap units for 2 to 6 wash places including hygiene kit
AQFU0002 Ready-to-connect tap unit for 2 wash places 600 mm with hygiene kit, connection left
AQFU0003 Ready-to-connect tap unit for 2 wash places 600 mm with hygiene kit, connection right
AQFT0007 AQUAFIT single lever mixer with thermostatic scald-protection for tap unit
AQFT0005 AQUAFIT single lever mixer for tap unit
AQFT0006 AQUAFIT single lever mixer for tap unit with hygiene kit
AQMXS0002 AQUAMIX-S self-closing single mixer for tap unit
AQMXS0003 AQUAMIX-S self-closing single mixer for tap unit with hygiene kit
PURELINE
PURE0001 PURELINE self-closing pillar tap for connection to cold water or pre-mixed warm water, flow time 15s
PURE0002 PURELINE self-closing bib tap 78mm projection for connection to cold water or pre-mixed warm
water, flow time 15s
PURE0003 PURELINE self-closing bib tap 113mm projection for connection to cold water or pre-mixed warm
PURE0004 PURELINE self-closing bib tap with swivel outlet, projection 180mm for connection to cold water or
pre-mixed warm water, flow time 15s
PURE0005 PURELINE self-closing pillar mixer with temperature selection lever, for connection to hot and cold
PURE0006 PURELINE self-closing single mixer WM with swivel outlet, projection 267mm, for connection to hot and
cold water, flow time 15s
PURE0007 PURELINE self-closing shower valve WM with outlet thread & rosette, for connecting to cold or pre-
mixed warm water, flow time 15s
PURE0008 PURELINE self-closing straight-way valve for surface pipe installation in shower facilities, for
connecting to cold or pre-mixed warm water, flow time 15s

FRANKE Products
PURE0009 PURELINE self-closing straight-way valve WM for shower facilities, for connecting to cold or pre-mixed
warm water, flow time 15s
PURE0010 PURELINE self-closing single mixer, WM for shower facilities, with outlet screw for connection for 14mm
shower pipe, for connecting to cold or pre-mixed warm water, flow time 15s
PURE0011 PURELINE self-closing single mixer, WM for shower facilities, for connecting to cold or pre-mixed warm
ZPURE0001 PURELINE extension adapter for self-closing bib taps for washing facilities, length 50mm
ZPURE0002 Extension set for PURELINE self-closing single mixer for installation in walls, length 25mm
Tap Spare Parts
8250001052 Push cap complete for use with AQUAMIX-C and AQUAMIX-S taps
8250001056 Push cap complete for use with AQUALINE-S taps
8250001057 Push cap complete for use with AQUALINE-C taps
8250001058 Spare part set for use with AQUAMIX-C and AQUAMIX-S taps
8201402023 Thread ring M33 x 1 for use with AQUALINE-C and AQUALINE-S taps
ETAPS0009 Functional part complete ABS, for use with AQUA213, AQUA213W, AQUA211, AQUA211W, AQUA212,
AQUA212P, AQUA210, AQUA210P, AQUA215, AQUA215W
ETAPS0002 Functional part complete standard, for use with AQUA203, AQUA203W, AQUA201, AQUA201W,
AQUA202, AQUA202P, AQUA200, AQUA200P, AQUA205, AQUA205W
ETAPS0017 Functional part complete low pressure, for use with AQUA203L, AQUA203WL, AQUA202L
8101303057VPE Aerator with regulator, for use with all AQUA taps, not low pressure
Z-AQUA087 Theft proof aerator for use with all taps not low pressure
8150002012 Installation set for use with AQUA202P, AQUA212P, AQUA200P & AQUA210P
EPRTR0009 8150003028 Installation set for use with AQUA202, AQUA202L, AQUA212, AQUA200, AQUA210
Z-AQUA093 Face pin wrench for use with AQUAMIX-C and AQUAMIX-S taps
8210003603 Cartridge complete with quad-rings for AQUAMIX-C and S
8510020603 Replacement flexi hose for AQRE131
8510020198 Mixing Lever with screw, for an AQUA Protronic AQRE130
AT00-026 Replacement single battery (for use with AQUA130)
WCs
AQUA557 Flushing plate for WC cistern - Single flush - 148x207x35mm to suit installation frames
AQUA555 Flushing plate for WC cistern - Push button - 145x205x35mm to suit installation frames
AT3O0051 AQUATIMER - AQUA 3000 open electronically controlled WC control for concealed cistern (replaces
the AQUA503)
PR3O0027 PROTRONIC - AQUA 3000 open opto-electronic WC control for concealed toilet cistern (replaces the
AQUA504)
AQRM555 Push button WC flush valve for in-wall mounting 225x205mm
AQRM552 AQUALINE WC flush valve DN 20 for surface installation
AQUA501 Electronic timer-controlled WC flush valve for in-wall mounting 225x205mm
FLSY0002 WC Cistern Dual Flush Duct Mount (replaces Z-AQUA079)
CMPX135 Installation frame
Z-CMPX140 Bracket set
AQFX0006 AQUAFIX Installation element for wall-mounted toilet bowl, with wall-installation cistern (replaces
CMPX140)
AQFX0007 AQUAFIX Installation frame for barrier-free wall-mounted toilet bowl, with wall-installation cistern
(replaces CMPX141)

FRANKE Products
Urinals
AQRE432 Sensor controlled flush valve - 230v
AQRE431 Sensor controlled flush valve - battery
AQRE434 Installation box for urinal flush valves
AQUA402 Protronic AQUA 3000 Open Touch free sensor and solenoid valve for urinals
AQUA401 Urinal IR sensor/valve AQUA 3000 Open
AQUA420 Electronic siphon control for Franke s/steel urinals
AQRM460 AQUALINE urinal flush valve for surface installation
AQRM464 AQUALINE urinal flush valve for surface installation, all-metal construction
Flush-S and -C urinal flush valves
AQLN0006 Basic installation kit for FLUSH-C, FLUSH-S urinal flush valve
AQLN0005 FLUSH-C urinal flush valve, finished installation kit
PRTR0013 FLUSH-S urinal flush valve, finished installation kit, 6V battery
PRTR0014 FLUSH-S urinal flush valve, finished installation kit, 230V AC
ZPRTR0001 Remote control for FLUSH-S
AQFX0002 AQUAFIX installation element for s/steel urinals with basic installation kit
AQFX0001 AQUAFIX installation element for ceramic urinals with basic installation kit
Showers
AQRM665 S/steel shower panel with self-closing stop valve
AQUA623 Shower panel with electronic timer (water efficient showerhead)
AQUA754 AQUAJET Slimline shower head - 6 LPM flow rate
ESHAS0001 8150001050 Spare part set for shower head AQUAJET-Slimline
Z-AQUA004 Twist-proof set
AQUA800 AQUAPAY Coin-operated controller for single shower - for tokens
AQUA802 Token Operated Controller for up to 31 Showers
ZAQRP001 Tokens for AQUAPAY controller - Pack of 50
AQUA615 Touch free sensor and solenoid valve for showers
AQRM704 Manual self-closing shower valve for installation into walls with adhesive flange
AQRM676 Manual self-closing shower valve for installation into walls without adhesive flange
AQRM677 Manual self-closing shower valve for installation into walls - Valve and facia
AQUA605 Electronic self-closing shower valve for installation into walls - Installation kit for fitting into walls with
adhesive flange
AQUA604 Basic installation kit for AQUA 3000 open electronic-controlled thermostatic mixer DN 15 for in-wall
installation in shower or wash facilities. With adhesive flange
AQRM666 AQUALINE self-closing shower valve for surface pipe installation - With internal thread
AQRM667 AQUALINE self-closing shower valve for surface pipe installation - With union connector
AQUA627 AQUATIMER - AQUA 3000 Open shower fitting finished installation kit, 24V DC
AQUA629 AQUATIMER - AQUA 3000 Open shower fitting for in-wall installation, 24V DC
AQRM668 AQUALINE self-closing shower valve for duct wall installation
AQRM688 Basic installation kit for mixers DN 15, for in-wall installation in shower facilities

FRANKE Products
AQRM699 Shower control
AQRM656 AQUAMIX self-closing mixer DN 15 for installation into walls, for connection to hot and cold water,
flow time adjustment. Consisting of self-closing single mixer, holding frame and s/steel cover plate
205x225mm
AQRM657 Basic installation kit for ARQM656
AQUA602 Basic installation kit for AQUA 3000 open thermostatic mixer, 24V DC
AQUA640 PROTRONIC - AQUA 3000 Open thermostatic mixer, finished installation kit, 24V DC
AT3O0038 AQUATIMER - AQUA 3000 Open shower mixer with thermostat, finished inst. Kit
AQLT0098 AQUALINE-Therm - shower panel with self-closing valve and thermostatic (Replaces AQRM687)
SMARTWAVE Shower Panel
AQMX0008 SMARTWAVE shower panel with AQUAMIX self-closing mixer
AQLT0036 SMARTWAVE shower panel with AQUALINE-Therm self-closing thermostatic mixer
ZSHOW0012 SMARTWAVE Installation and maintenance kit
AQUALINE-Therm self-closing thermostatic mixer for shower facilities
AQLT0045 AQUALINE-Therm self-closing thermostatic mixer for surface installation
AQLT0046 AQUALINE-Therm self-closing thermostatic mixer for surface installation, ASE
AQLT0049 AQUALINE-Therm self-closing thermostatic mixer with AQUAJET-Slimline
AQLT0050 AQUALINE-Therm self-closing thermostatic mixer with AQUAJET-Slimline, ASE
AQLT0057 AQUALINE-Therm self-closing thermostatic mixer with AQUAJET-Comfort
AQLT0058 AQUALINE-Therm self-closing thermostatic mixer with AQUAJET-Comfort ASE
AQLT0053 AQUALINE-Therm self-closing thermostatic mixer for surface installation, hand shower connection
AQUACONTACT - shower fittings with touch sensor
AQCT0042 Basic installation kit with adhesive flange for AQUACONTACT shower fitting
AQCT0045 Basic installation kit without adhesive flange for AQUACONTACT shower fitting
AQCT0025 Finished installation kit AQUACONTACT shower fitting
AQRM698 Basic installation kit with adhesive flange for AQUACONTACT shower fitting with thermostatic mixer
AQCT0026 Finished installation kit AQUACONTACT shower fitting with thermostatic mixer
AQCT0027 AQUACONTACT shower fitting for concealed installation
AQCT0028 AQUACONTACT shower panel with glass front, thermostat and shower head AQUAJET-Slimline
AQCT0005 AQUACONTACT shower panel, made of s/steel with shower head AQUAJET-Slimline
AQCT0007 AQUACONTACT shower panel, made of s/steel Inox Plus, shower head AQUAJET-Slimline
AQCT0009 AQUACONTACT shower panel, made of s/steel with shower head AQUAJET-Comfort
AQCT0011 AQUACONTACT shower panel, made of s/steel Inox Plus, shower head AQUAJET-Comfort
AQCT0006 AQUACONTACT shower panel, made of s/steel with shower-gel tray, shower head AQUAJET-Slimline
AQCT0008 AQUACONTACT shower panel, made of s/steel Inox Plus, shower-gel tray, shower head AQUAJET-
Slimline
AQCT0010 AQUACONTACT shower panel, made of s/steel with shower-gel tray, shower head AQUAJET-Comfort
AQCT0012 AQUACONTACT shower panel, made of s/steel Inox Plus, shower-gel tray, shower head AQUAJET-
Comfort
AQCT0017 AQUACONTACT shower panel, made of s/steel with thermostat, shower head AQUAJET-Slimline

FRANKE Products
AQCT0019 AQUACONTACT shower panel, made of s/steel Inox Plus, with thermostat, shower head AQUAJET-
Slimline
AQCT0021 AQUACONTACT shower panel, made of s/steel with thermostat, shower head AQUAJET-Comfort
AQCT0023 AQUACONTACT shower panel, made of s/teel Inox Plus, with thermostat, shower head AQUAJET-
Comfort
AQCT0018 AQUACONTACT shower panel, made of s/teel with thermostat, shower-gel tray, shower head
AQUAJET-Slimline
AQCT0022 AQUACONTACT shower panel, made of s/steel with thermostat, shower-gel tray, shower head
AQUAJET-Comfort
AQCT0031 AQUACONTACT shower panel made of mineral material with shower head AQUAJET-Slimline
AQCT0033 AQUACONTACT shower panel made of mineral material with shower head AQUAJET-Comfort
AQCT0032 AQUACONTACT shower panel made of mineral material, with shower-gel tray, shower head
AQUAJET-Slimline
AQCT0034 AQUACONTACT shower panel made of mineral material, with shower-gel tray, shower head
AQUAJET- Comfort
AQCT0037 AQUACONTACT shower panel made of mineral material, with thermostat, shower head AQUAJET-
Slimline
AQCT0039 AQUACONTACT shower panel made of mineral material, with thermostat, shower head AQUAJET-
Comfort
AQCT0038 AQUACONTACT shower panel made of mineral material, with thermostat, shower-gel tray, shower
head AQUAJET-Slimline
AQCT0040 AQUACONTACT shower panel made of mineral material, with thermostat, shower-gel tray, shower
head AQUAJET-Comfort
AQCT0050 SMARTWAVE AQUACONTACT Shower panel, water connectivity from above
AQCT0051 SMARTWAVE AQUACONTACT Shower panel, water connectivity from rear
Mandatory Accessories for use with SMARTWAVE AQUACONTACT
ZAQCT0003 Battery Box - 6V Battery included
ZAQCT0004 Mains Power Supply
ZAQCT0005 Extension cable
Optional Accessories for use with SMARTWAVE AQUACONTACT
ZAQCT0002 Solenoid valve cartridge, 6V DC
AQRE915 Extension cable 3m
A3000 Accessories
ZAQUA073 Extension for T-connector 5m
ZA3OP0005 Sensor Extension C/W 1m cable
8403212406 Sensor adapter plug for external 2 wire connection C/W 1m cable
8403212407 Sensor adapter jack for external 2 wire connection (e.g. door contact) C/W 1m cable
ZFLSY0003 Transformer 230/24V AC, 100 VA
ZAQUA076 Electronic module - AQUA 3000 Open, or 3-way valve
ZAQUA023 3-way valve 24V AC

FRANKE Products
8403212409 Y Connector - Sensor Piezo
ZA3OP0002 Actuator Extension cable 2m
8403212420 Y Connector - Actuator
8403212521 Adapter cable for piezo sensor 0.1m
EAT3O0001 Piezo push button with rosette
8410017198 Adapter cable for connection between EM and RPE-valve 7W
ETAPS0023 Solenoid valve 7W
8510017181 IR Sensor - chrome polished without logo
ZA3OP0025 Power supply unit 60W
AQRE908 Power supply unit 48W
AQRM556 Installation set for AQRM555 & AQUA501
AQRM920 Down pipe for flush valve
AQUA500 Installation set for AQUA501
AQUA502 Infra red button plate
Z-AQUA005 ECC1 (60W)
Z-AQUA006 UPS (Uninterruptible Power Supply) Battery Back up
Z-AQUA011 BUS Cable 100m Halogen Free (Blue)
Z-AQUA012 BUS Cable 25m Halogen Free (Blue)
Z-AQUA013 System cable coupling (5 per pack)
Z-AQUA014 Cable Terminator
Z-AQUA015 Solenoid valve cartridge
Z-AQUA017 Temperature Sensor
Z-AQUA020 Surface Sensor Warm - For Pipe Fitment
Z-AQUA021 Surface Sensor Cold - For Pipe Fitment
Z-AQUA022 Key Switch
Z-AQUA075 T Connector
Z-AQUA077 BUS Cable 100m (Grey)
Z-AQUA078 BUS Cable 25m (Grey)
Z-AQUA084 S/steel circular plate for Protronic Sensors
AQRM310 Minitherm low-level thermostatic device with connection set
8510020582 EPRTR0004 PROTRONIC solenoid self-closing valve cartridge, 24V DC
8510020583 ESHOW0014 Bypass solenoid valve cartridge 24V DC
AQUA767 AQUAMIX self-closing single mixer, finished installation kit
8510020602 Lever mixer with temperature limit stop for safety and comfort
8510020364 Set of input screw connections
8410017351 Piezo button rosette plate
ZA3OP0023 WC Cistern Motor (Replaces 46040000)
ZA3OP0009 Extension cable red AQUA 3000 Open for temperature sensor - Hot
ZA3OP0010 Extension cable red AQUA 3000 Open for temperature sensor - Cold
8410017108ID00 EM1 Electronic module without any ID program to use for service technicians only.
FITG0003 Electronically Operated Push Button for Mounting Unit from front
8410017127 Piezo sensor incl. s/steel plate
8403212521 Sensor adapter cable 0.1m

FRANKE Products
ZAQUA032 Solenoid valve ½”
ETAPS0022 Solenoid valve AQUA 3000 Open 24V DC, connections G ¾ B, water protected model with moulded
inductor, strainer and connector for AQUANET.
EPRTR0004 PROTRONIC solenoid self-closing valve cartridge with connection adapter for cable plug, for urinal
flush fittings, 24V DC, AQUA 3000 Open.
EAQLT0017 Thermocouple, with rising spindle (replaces ESHOW0013)
ZA3OP0011 ECC-2 function controller - AQUA 3000 open with Ethernet, 230V AC / 24V DC
ZA3OP0012 Expansion module (I/O)
ZA3OP0013 Radio module (GSM)
ZA3OP0015 Rod antenna for radio module (GSM)
ZA3OP0016 Wall antenna for radio module (GSM)
ZA3OP0017 Antenna with amplifier for radio module (GSM)
EA3OP0009 Fitting Group with ball valve
ZA3OP0022 ECC-2 with BMS protocol (BacNet, KNX, ModBus)
Z-AQUA082 Time Switch
AT00-043 AQUA 3000 Open Interface Unit

franke accessories
Franke Accessories
RODX619 Soap dispenser for wall mounting, s/steel, surface satin finished, material thickness 0.8 mm, folded
front cover, cylinder lock with Franke standard key, suitable for liquid soaps and lotions, 1 liter soap
tank, push button on front, incl. s/steel screws and dowels.
RODX618 Soap dispenser for wall mounting, s/steel, surface satin finished, material thickness 0.8 mm, folded
front cover, cylinder lock with Franke standard key, suitable for liquid soaps and lotions, 0.8 liter soap
tank, lever to pull, incl. s/steel screws and dowels.
RODX625 Touch free soap dispenser for wall mounting, s/steel, surface, satin finished, material thickness 0.8
mm, folded front cover, cylinder lock with Franke standard key, infrared sensor activity for non-touch
operation, LED-display shows battery status, needs 6 pcs. 1.5V Alkaline AA batteries, suitable for
liquid soaps and lotions, 800 ml soap tank, depending on soap between 0.6 and 1.1 ml is dispensed,
mounting height > 300 mm above wash basin or table top, incl. s/steel screws and dowels. Dimen-
sions 120 x 296 x 107 mm (W x H x D)
RODX310 Touch free electronic warm air hand dryer for wall mounting, s/steel, surface satin finished, material
thickness 1.2 mm, infrared sensor activity for non-touch operation, sensor range adjustable from 10 to
30 cm, cable and plug not included. Connection voltage: 230V, 50 Hz Total power: 2200 W Heater:
2100 W Motor: 100 W Motor mit 2850 U/min Air volume: 274 m³/h Air velocity: 15.5 m/s
RODX600 Paper towel dispenser for wall mounting, s/steel, surface satin finished, material thickness 0.8 mm,
folded front cover, cylinder lock with Franke standard key, inspection windows on sides, loading ca-
pacity 500 - 800 pcs. of paper depending on convolution, incl. s/steel screws and dowels.
RODX630 Touch free paper towel dispenser for wall mounting, s/steel, surface satin finished, material thickness
0.8 mm, folded cover with cylinder lock and standard Franke key, infrared sensor activity for non-
touch operation, integrated tear-off edge, needs 4 pcs. standard D 1.5V batteries, maintenance
free mechanic and easy paper roll change mechanism, for rolls with max. width 205 mm and max.
Diameter 200 mm, paper length adjustable to 200, 250 and 300 mm, incl. s/steel screws and dowels.
RODX605 Waste bin for wall mounting, s/steel, surface satin finished, material thickness 0.8 mm, rounded edg-
es, mounting either with mounting bracket or directly onto the wall, incl. s/steel screws and dowels.
Capacity: approx. 23 litre
RODX611 Sanitary towel and disposal bin for wall mounting, s/steel, surface satin finished, material thickness
0.8 mm, folded front cover, approx. 3.7 litre capacity, removable plastic container inside, incl. s/steel
screws and dowels.
RODX602 Paper towel dispenser, waste bin combination for wall mounting, s/steel, surface satin finished, ma-
terial thickness 0.8 mm, folded front cover, cylinder lock with Franke standard key, loading capacity
500 - 800 pcs. of paper depending on convolution, waste bin with approx. 23 litre capacity, incl.
s/steel screws and dowels.
RODX672 Double toilet roll holder with spindle system for wall mounting, s/steel, surface satin finished, material
thickness 0.8 mm, folded front cover, cylinder lock with Franke standard key, for 2 rolls with max.120
mm, second roll will be released after consumption of first roll, with spindles, reserve roll not visible,
incl. s/steel screws and dowels.
RODX687 Toilet brush holder for wall mounting, s/steel, surface satin finished, material thickness 0.8 mm, folded
front, closed cover to the front, lasered opening for brush, white nylon brush with flushing rim cleaner,
withdrawal opening either left or right, depending on mounting, removable plastic drip tray, incl.
FRANKE Accessories
The Franke Accessories range includes
a variety of products; touch-free soap
and paper towel dispensers, s/steel
waste bins, toilet roll holders and more.

Franke Accessories
RODX619E Soap dispenser for recessed mounting, s/steel, surface satin finished, material thickness 0.8 mm,
folded front cover, cylinder lock with Franke standard key, suitable for liquid soaps and lotions, 1 litre
soap tank, push button on front, incl. s/steel screws and dowels.
RODX618E Soap dispenser for recessed mounting, s/steel, surface satin finished, material thickness 0.8 mm, fold-
ed front cover, cylinder lock with Franke standard key, suitable for liquid soaps and lotions, 0.8 litre
soap tank, lever to pull, incl. s/steel screws and dowels.
RODX600E Paper towel dispenser for recessed mounting, s/steel, surface satin finished, material thickness 0.8
mm, folded front cover, cylinder lock with Franke standard key, loading capacity 500 - 800 pcs. of
paper depending on convolution, incl. s/steel screws and dowels.
RODX605E Waste bin for recessed mounting, s/steel, surface satin finished, material thickness 0.8 mm, rounded
edges, cylinder lock with Franke standard key, mounting with in-wall frame, incl. s/steel screws and
dowels. Capacity: approx. 23 litre
RODX602E Paper towel dispenser - waste bin combination for recessed mounting, s/steel, surface satin finished,
material thickness 0.8 mm, folded front cover, cylinder lock with Franke standard key, loading ca-
pacity 500 - 800 pcs. of paper depending on convolution, waste bin with approx. 23 litre capacity,
RODX600ME Paper towel dispenser for hidden mounting behind wall and mirror, s/steel, surface satin finished,
material thickness 0.8 mm, for 600 - 800 paper towels, depending on convolution, filling from bottom,
incl. s/steel screws and dowels. 342x464x113 mm (WxHxD)
RODX672E Double toilet roll holder with spindle system for recessed mounting, s/steel, surface satin finished,
material thickness 0.8 mm, folded front cover, cylinder lock with Franke standard key, for 2 rolls with
max.120 mm, second roll will be released after consumption of first roll, reserve roll not visible, incl.
SO10L Liquid soap, organic, 10 litre canister.
SO1L Liquid soap, organic, 1 litre bottle. (Minimum order quantity 6 bottles)
FH68 Folded paper towels, 1 package contains 168 pieces, minimum order quantity 20 packages per box.
STRX618 Soap dispenser for wall mounting, s/steel, surface satin finished, front with InoxPlus surface refinement
for the reduction of finger marks and better cleaning characteristics (easy to clean), material thick-
ness 1.5 mm, curved front cover, cylinder lock with Franke standard key, inspection window on front,
suitable for liquid soaps and lotions, 0.8 litre soap tank, with plastic pull lever, incl. s/steel screws and
dowels.
STRX619 Soap dispenser for wall mounting, s/steel, surface satin finished, front with InoxPlus surface refine-
ment for the reduction of finger marks and better cleaning characteristics (easy to clean), material
thickness 1.5 mm, curved front cover, cylinder lock with Franke standard key, inspection window on
front, suitable for liquid soaps and lotions, 1 litre soap tank, push button on front, incl. s/steel screws
and dowels.
STRX625 Touch free soap dispenser for wall mounting, s/steel, surface satin finished, front with InoxPlus surface
refinement for the reduction of finger marks and better cleaning characteristics (easy to clean),
material thickness 1.5 mm, curved front cover, cylinder lock with Franke standard key, inspection
window on front, infrared sensor activity for non-touch operation, red light shows battery status, incl.
6 pcs. 1.5V Alkaline AA batteries, suitable for liquid soaps and lotions, 0.8 litre soap tank, depending
on soap between 0.6 and 1.1 ml is dispensed, mounting height >300 mm above wash basin or table
top, incl. s/steel screws and dowels.
STRX210 Touch free electronic warm air hand dryer for wall mounting, s/steel, surface satin finished, front with
InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics
(easy to clean), material thickness 1.5 mm, curved front cover, Infrared sensor activity for non-touch
operation, sensor range adjustable from 5 to 33 cm, automatic power shut-off after 60 seconds, due
to the extreme high, adjustable air velocity the drying time is shortened strongly, cable and plug
not included. Connection voltage: 230V, 50 Hz Total power: 1500 W Heater: 800 W Motor: 700 W Air
volume: 120 m³/h Air velocity: 75-110 m/s without a s/steel mesh filter in the air inlet.
STRX600 Paper towel dispenser for wall mounting, s/steel, surface satin finished, front with InoxPlus surface
window on front, loading capacity 300 - 400 pcs. of paper depending on convolution, incl. s/steel
screws and dowels.

Franke Accessories
STRX635 Center feed paper roll box for wall mounting, s/steel, surface satin finished, front with InoxPlus surface
refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), ma-
terial thickness 1.5 mm, curved front cover, cylinder lock with Franke standard key, for paper rolls with
max.190 mm and max. height of 250 mm, only for center feed paper rolls, integrated tear-off edge
and strain relief avoiding paper tear-off within casing, incl. s/steel screws and dowels.
STRX601 Paper towel-, soap dispenser combination for wall mounting, s/steel, surface satin finished, front with
InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics
(easy to clean), material thickness 1.5 mm, curved front cover, cylinder lock with Franke standard
key, inspection windows on front, paper towel dispenser with loading capacity 300 - 400 pcs. of
paper depending on convolution, suitable for liquid soaps and lotions, 0.8 litre soap tank, push lever,
STRX630 Touch free paper towel dispenser for wall mounting, s/steel, surface satin finished, front with InoxPlus
surface refinement for the reduction of finger marks and better cleaning characteristics (easy to
clean), material thickness 1.5 mm, curved front cover, cylinder lock with Franke standard key, infra-
red sensor activity for non-touch operation, integrated tear-off edge, incl. 4 pcs. standard D 1.5V
batteries, maintenance free mechanic and easy paper roll change mechanism, for rolls with max.
width 205 mm and max. diameter 200 mm, paper length adjustable to 200, 250 and 300 mm, incl.
STRX650 Face towel dispenser for wall mounting, s/steel, surface satin finished, front with InoxPlus surface
terial thickness 1.5 mm, curved front with oval aperture for withdrawal of common used face towels,
STRX605 Waste bin for wall mounting, s/steel, surface satin finished, front with InoxPlus surface refinement for
the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness
1.5 mm, curved front cover, cylinder lock with Franke standard key, approx. 34 litre capacity, inte-
grated bag holder, incl. s/steel screws and dowels.
STRX607 Waste bin for wall mounting, s/steel, surface satin finished, front with InoxPlus surface refinement for
the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness
1.5 mm, curved front cover, cylinder lock with Franke standard key, approx. 45 litre capacity, inte-
grated bag holder, incl. s/steel screws and dowels.
STRX608 Folding self-closing lid for waste bin STRX607, s/steel, surface satin finished, front with InoxPlus surface
terial thickness 1.5 mm, inclined front with self-closing lid, cylinder lock with Franke standard key, incl.
s/steel screws and dowels, without waste bin.
STRX611 Sanitary towel and disposal bin for wall mounting, s/steel, surface satin finished, front with InoxPlus sur-
face refinement for the reduction of finger marks and better cleaning characteristics (easy to clean),
material thickness 1.5 mm, curved front cover, approx. 3.8 litre capacity, folding self-closing lid with
piano hinge, removable plastic container inside, incl. s/steel screws and dowels.
HBD191 Hygiene bag dispenser for wall mounting, s/steel, surface satin finished with InoxPlus surface refine-
ment for the reduction of finger marks and better cleaning characteristic (easy to clean), material
thickness 1.2 mm, edges not welded, inboard lug to hold package, withdrawal from front, incl. pre-
mounted double side self-adhesive tap and s/steel screws and dowels, incl. acetone rag to clean
bonding surface.
STRX615 Hygiene bag dispenser for wall mounting, s/steel, surface satin finished, with InoxPlus surface refine-
thickness 1.2/1.5 mm, with inspection window, incl. s/steel screws and dowels.
STRX680 Toilet seat paper dispenser for wall mounting, s/steel, surface satin finished, front with InoxPlus surface
material thickness 1.5 mm, curved front cover with oval aperture, cylinder lock with Franke standard
key, for Franke seat paper or others, incl. s/steel screws and dowels.
STRX670 Jumbo roll holder for wall mounting, s/steel, surface satin finished, front with InoxPlus surface refine-
ment for the reduction of finger marks and better cleaning characteristics (easy to clean), mate-
rial thickness 1.5 mm, closed casing with curved front, paper withdrawal over two tear-off edges,
cylinder lock with Franke standard key, for 1 roll with max. diameter 295 mm, incl. s/steel screws and
dowels.

Franke Accessories
STRX671 Double toilet roll holder for wall mounting, s/steel, surface satin finished, front with InoxPlus surface
material thickness 1.5 mm, curved front cover, cylinder lock with Franke standard key, for 2 rolls with
max.120 mm, second roll will be released after consumption of first roll, without spindles, incl. s/steel
screws and dowels.
STRX671L Double toilet roll holder without spindle system for wall mounting, s/steel, surface satin finished, front
with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics
key, for 2 rolls with max.140 mm, second roll will be released after consumption of first roll, incl. s/steel
screws and dowels.
STRX672 Double toilet roll holder with spindle system for wall mounting, s/steel, surface satin finished, front
key, for 2 rolls with max.120 mm, second roll will be released after consumption of first roll, with spin-
dles, reserve roll not visible, incl. s/steel screws and dowels.
STRX692 Hook for wall mounting, s/steel, surface satin finished, 17 mm pipe diameter, drilled hole on bottom
for fixation, incl. s/steel screws and dowels.
STRX694 Double hook for wall mounting, s/steel, surface satin finished, 18 mm pipe diameter, drilled hole on
bottom for fixation, incl. s/steel screws and dowels.
STRX687 Toilet brush holder for wall mounting, s/steel, surface satin finished, front with InoxPlus surface refine-
thickness 1.5 mm, curved front cover, white nylon brush with flushing rim cleaner, withdrawal open-
ing either left or right, depending on mounting, removable plastic drop tray, incl. s/steel screws and
dowels.
STRX618E Soap dispenser for recessed mounting, s/steel, surface satin finished, front with InoxPlus surface re-
finement for the reduction of finger marks and better cleaning characteristics (easy to clean), mate-
rial thickness 1.5 mm, curved front cover with inspection window, cylinder lock with Franke standard
key, suitable for liquid soaps and lotions, 0.8 litre soap tank, with plastic pull lever, incl. s/steel screws
and dowels.
STRX619E Soap dispenser for recessed mounting, s/steel, surface satin finished, front with InoxPlus surface re-
finement for the reduction of finger marks and better cleaning characteristics (easy to clean), mate-
rial thickness 1.5 mm, curved front cover with inspection window, cylinder lock with Franke standard
key, suitable for liquid soaps and lotions, 1 litre soap tank, push button on front, incl. s/steel screws
and dowels.
STRX600E Paper towel dispenser for recessed mounting, s/steel, surface satin finished, front with InoxPlus sur-
window on front, loading capacity 300 - 400 pcs. of paper depending on convolution, incl. s/steel
screws and dowels.
STRX601E Paper towel-, soap dispenser combination for recessed mounting, s/steel surface satin finished, front
key, inspection windows on front, paper towel dispenser with loading capacity 300 - 400 pcs. of
paper depending on convolution, suitable for liquid soaps and lotions, 0.8 litre soap tank, push lever,
STRX605E Waste bin for recessed mounting, s/steel, surface satin finished, front with InoxPlus surface refinement
for the reduction of finger marks and better cleaning characteristics (easy to clean), material thick-
ness 1.5 mm, curved front cover, cylinder lock with Franke standard key, approx. 22 litre capacity,
integrated bag holder, incl. s/steel screws and dowels.
STRX611E Sanitary towel and disposal bin for recessed mounting, s/steel, surface satin finished, front with Inox-
Plus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to
clean), material thickness 1.5 mm, curved front cover, approx. 3.8 litre capacity, folding self-closing
lid with piano hindge, removable plastic container inside, incl. s/steel screws and dowels.

Franke Accessories
STRX602E Paper towel dispenser, waste bin combination for recessed mounting, s/steel, surface satin finished,
front with InoxPlus surface refinement for the reduction of finger marks and better cleaning char-
acteristics (easy to clean), material thickness 1.5 mm, curved front cover, cylinder lock with Franke
standard key, inspection windows on front, loading capacity 300 - 400 pcs. of paper depending on
convolution, waste bin with approx. 22 litre capacity, integrated bag holder, incl. s/steel screws and
dowels.
STRX617E Waste bin, paper towel-, soap dispenser combination for recessed mounting, s/steel, surface satin
finished, front with InoxPlus surface refinement for the reduction of finger marks and better cleaning
characteristics (easy to clean), material thickness 1.5 mm, curved front cover, cylinder lock with
Franke standard key, inspection windows on front, paper towel dispenser with loading capacity 300 -
400 pcs. of paper depending on convolution, suitable for liquid soaps and lotions, 0.8 litre soap tank,
push lever, waste bin with approx. 29 litre capacity, integrated bag holder, incl. s/steel screws and
dowels.
STRX671E Double toilet roll holder for recessed mounting, s/steel, surface satin finished, front with InoxPlus sur-
material thickness 1.5 mm, curved front cover with inspection window, cylinder lock with Franke
standard key, for 2 rolls with max. diameter 120 mm, second roll will be released after consumption of
first roll, without spindles, incl. s/steel screws and dowels.
STRX672E Double toilet roll holder with spindle system for recessed mounting, s/steel, surface satin finished, front
(easy to clean), material thickness 1.5 mm, curved front cover with inspection window, cylinder lock
with Franke standard key, for 2 rolls with max. diameter 120 mm, second roll will be released after
consumption of first roll, reserve roll not visible, incl. s/steel screws and dowels.
STRX673E Toilet roll holder for recessed mounting, s/steel, surface satin finished, material thickness 0.8 mm,
curved folding cover, for 1 roll with max. width 130 mm, incl. s/steel screws and dowels.
E-STRX680 WC-seat paper, 250 pieces per packing
HBD191B Hygiene bag for hygiene-bag-dispenser HBD191/RODX191, 30 pc. per box.
HB140 Hygiene bag (paper) fits to hygiene-bag-dispenser STRX615, XINX615, RODX612, 100 pc. per box.

franke exos
EXOS RANGE
EXOS625X EXOS. Electronic Soap Dispenser s/steel complete coated
EXOS625B EXOS. Electronic Soap Dispenser Black Glass
EXOS625W EXOS. Electronic Soap Dispenser White Glass
EXOS618X EXOS. Liquid Soap Dispenser s/steel complete coated
EXOS618B EXOS. Liquid Soap Dispenser Black Glass
EXOS618W EXOS. Liquid Soap Dispenser White Glass
EXOS616X EXOS. Foam Soap Dispenser s/steel complete coated
EXOS616B EXOS. Foam Soap Dispenser Black Glass
EXOS616W EXOS. Foam Soap Dispenser White Glass
ZEXOS616 Interchangeable front panels for EXOS. Soap dispenser - InoxPlus-coated front panel
ZEXOS616B Interchangeable front panels for EXOS. Soap dispenser - Black toughened safety glass front panel
ZEXOS616W Interchangeable front panels for EXOS. Soap dispenser - White toughened safety glass front panel
ZEXOS625K EXOS. Automatic soap dispenser conversion kit
ZEXOS618K EXOS. Liquid soap dispenser conversion kit
ZEXOS616K EXOS. Foam soap dispenser conversion kit
EXOS637X EXOS. Paper Towel Roll s/steel complete coated
EXOS637B EXOS. Paper Towel Roll Black Glass
EXOS637W EXOS. Paper Towel Roll White Glass
ZEXOS637 Interchangeable front panels for EXOS. Paper towel dispenser - InoxPlus-coated front panel
ZEXOS637B Interchangeable front panels for EXOS. Paper towel dispenser - Black toughened safety glass front
panel
ZEXOS637W Interchangeable front panels for EXOS. Paper towel dispenser - White toughened safety glass front
panel
EXOS600X EXOS. Paper Towel Holder s/steel complete coated
EXOS600B EXOS. Paper Towel Holder Black Glass
EXOS600W EXOS. Paper Towel Holder White Glass
ZEXOS600 Interchangeable front panels for EXOS. Paper towel dispenser - InoxPlus-coated front panel
FRANKE EXOS
The new Franke EXOS range consists
of functional high performance wash-
room accessories and washbasins,
utilising high quality materials including
s/steel and glass.

EXOS RANGE
ZEXOS600B Interchangeable front panels for EXOS. Paper towel dispenser - Black toughened safety glass front
panel
ZEXOS600W Interchangeable front panels for EXOS. Paper towel dispenser - White toughened safety glass front
panel
EXOS605X EXOS. Waste Bin s/steel complete coated
EXOS605B EXOS. Waste Bin Black Glass
EXOS605W EXOS. Waste Bin White Glass
ZEXOS605 Interchangeable front panels for EXOS. Waste bin - InoxPlus-coated front panel
ZEXOS605B Interchangeable front panels for EXOS. Waste bin - Black toughened safety glass front panel
ZEXOS605W Interchangeable front panels for EXOS. Waste bin - White toughened safety glass front panel
ANMW0010 EXOS. Single washbasin - standard (W600 x H125 x D500m)
ANMW0011 EXOS. Single washbasin - standard (W900 x H125 x D500m)
ANMW0001 EXOS. Single washbasin - Wheelchair accessible (W600 x H125 x D500m)
ANMW0002 EXOS. Single washbasin - Wheelchair accessible (W900 x H125 x D500m)
ANMW0003 EXOS. Hand washbasin - Wheelchair accessible (W500 x H121 x D400m)
ZANMW901 Dome waste valve DN 32
ZANMW901 Strainer waste DN 32
Complementary
Products
SD80 Soap dispenser for table top mounting into worktops
RODX605TT Waste disposal flap for table top installation
RODX607TT Waste chute for table top installation
RODX600TT Paper towel dispenser for installation from the top
SO1L Organic liquid soap, 1 litre bottle (minimum order qty 6 bottles) suitable for EXOS625 & EXOS618
SO10L Liquid organic soap, 10 litre, suitable for EXOS625 & EXOS618
E-XINX616 FOAM Foam soap cartridge 650ml (minimum order QTY 9 bottles) suitable for EXOS616
FH68 FH68 Z-folded paper towels, 255 x 92mm 168 PCS per pack, 20 packs per box (minimum order QTY 1
box) suitable for EXOS600

Dart Valley Systems Ltd
Kemmings Close
Long Road
Paignton
Devon
TQ4 7TW
United Kingdom
t +44 (0)1803 529021
f +44 (0)1803 559016
e sales@dartvalley.co.uk
w www.dartvalley.co.uk
28/09/2016

Dart Valley Systems Catalogue

More Related Content

What's hot (20)

Similar to Dart Valley Systems Catalogue (20)

More from Thorne & Derrick UK (20)

Recently uploaded (20)

Dart Valley Systems Catalogue