Design of FIR filters

Design of FIR Filters

Elena Punskaya
www-sigproc.eng.cam.ac.uk/~op205

Some material adapted from courses by
Prof. Simon Godsill, Dr. Arnaud Doucet,
Dr. Malcolm Macleod and Prof. Peter Rayner

68

FIR as a class of LTI Filters

Transfer function of the filter is

Finite Impulse Response (FIR) Filters:
N = 0, no feedback

69

FIR Filters

Let us consider an FIR filter of length M (order N=M-1, watch out!
order – number of delays)

70

FIR filters

Can immediately obtain the impulse response, with x(n)= δ(n)

δ

The impulse response is of finite length M, as required

Note that FIR filters have only zeros (no poles). Hence
known also as all-zero filters

FIR filters also known as feedforward or
non-recursive, or transversal
71

FIR Filters

Digital FIR filters cannot be derived from analog filters –
rational analog filters cannot have a finite impulse
response.

Why bother?

1.  They are inherently stable
2.  They can be designed to have a linear phase
3.  There is a great flexibility in shaping their magnitude
response
4.  They are easy and convenient to implement

Remember very fast implementation using FFT?

72

FIR Filter using the DFT

FIR filter:

Now N-point DFT (Y(k)) and then N-point IDFT (y(n)) can be used
to compute standard convolution product and thus to perform
linear filtering (given how efficient FFT is)

73

Linear-phase filters

The ability to have an exactly linear phase response is the one
of the most important of FIR filters

A general FIR filter does not have a linear phase response but
this property is satisfied when

four linear phase filter types

74

Linear-phase filters – Filter types

Some observations:

•  Type 1 – most versatile

•  Type 2 – frequency response is always 0 at
ω=π – not suitable as a high-pass

•  Type 3 and 4 – introduce a π/2 phase shift,
frequency response is always 0 at ω=0 - – not
suitable as a high-pass

75

FIR Design Methods

•  Impulse response truncation – the simplest
design method, has undesirable frequency
domain-characteristics, not very useful but
intro to …

•  Windowing design method – simple and
convenient but not optimal, i.e. order
achieved is not minimum possible

•  Optimal filter design methods

76

Back to Our Ideal Low- pass Filter Example

77

Approximation via truncation

M

M

78

Approximated filters obtained by truncation

M M

transition band

M M

M
79

Window Design Method

To be expected …
Truncation is just pre-multiplication by a rectangular window
This is not very clever
– obviously one
introduces a delay

spectrum convolution

80

Rectangular Window Frequency Response

81

Window Design Method

M
M M

M N M

82

Magnitude of Rectangular Window Frequency Response

83

Truncated Filter

84

Truncated Filter

85

Ideal Requirements

Ideally we would like to have
•  small – few computations
•  close to a delta Dirac mass for
to be close to

our ideal low-pass filter

These two requirements are conflicting!
86

Increasing the dimension of the window
M M

M M

•  The width of the main lobe decreases as M increases
M
87

Conflicting Ideal Requirements

88

Solution to Sharp Discontinuity of Rectangular Window

Use windows with no abrupt discontinuity in their time-
domain response and consequently
low side-lobes in their frequency response.

In this case, the reduced ripple comes at the expense
of a wider transition region but this

However, this can be compensated for by increasing
the length of the filter.

89

Alternative Windows –Time Domain

Many alternatives have been proposed, e.g.
•  Hanning
•  Hamming
•  Blackman

90

Windows –Magnitude of Frequency Response

91

Summary of Windows Characteristics

We see clearly that a wider transition region (wider main-lobe)
is compensated by much lower side-lobes and thus less ripples.

92

Filter realised with rectangular/Hanning windows

Back to our ideal filter

realised with Hanning window
realised with
rectangular window

M=16 M=16
There are much less ripples for the Hanning window but
that the transition width has increased
93

Filter realised with Hanning windows

realised with Hanning window realised with Hanning window
M=16 M=40

Transition width can be improved by increasing the size of the
Hanning window to M = 40
94

Windows characteristics

•  Fundamental trade-off between main-lobe
width and side-lobe amplitude

•  As window smoother, peak side-lobe
decreases, but the main-lobe width increases.

•  Need to increase window length to achieve
same transition bandwidth.

95

Specification necessary for Window Design Method

ωc - cutoff frequency
δ  - maximum passband
ripple
Δω – transition bandwidth
Δωm – width of the window
mainlobe

Response must not enter shaded regions
96

Key Property 1 of the Window Design Method

97


98


99


100


101

Passband / stopband ripples

Passband / stopband ripples are often expressed in dB:

passband ripple = 20 log10 (1+δp ) dB,
or peak-to-peak passband ripple ≅ 20 log10 (1+2δp) dB;
minimum stopband attenuation = -20 log10 (δs ) dB.

Example: δp= 6% peak-to-peak passband ripple ≅ 20 log10 (1+2δp) = 1dB;

δs = 0.01 minimum stopband attenuation = -20 log10 (δs) = 40dB.

The band-edge frequencies ωs and ωp are often called corner frequencies,
particularly when associated with specified gain or attenuation (e.g. gain =
-3dB).

102

Summary of Window Design Procedure

•  Ideal frequency response has infinite impulse response

•  To be implemented in practice it has to be
–  truncated
–  shifted to the right (to make is causal)

•  Truncation is just pre-multiplication by a rectangular window
–  the filter of a large order has a narrow transition band
–  however, sharp discontinuity results in side-lobe
interference independent of the filter’s order and
shape Gibbs phenomenon

•  Windows with no abrupt discontinuity can be used to reduce
Gibbs oscillations (e.g. Hanning, Hamming, Blackman) 103

Summary of the Key Properties of the Window
Design Method
1.  Equal transition bandwidth on both sides of the ideal cutoff
frequency.
2.  Equal peak approximation error in the pass-band and stop-
band.
3.  Distance between approximation error peaks is
approximately equal to the width of the window main-lobe.
4.  The width of the main-lobe is wider than the transition band.
approximation error peaks

5.  Peak
transition approximation error
bandwidth is determined by the
window shape,
mainlobe independent of the
width filter order.

104

Summary of the windowed FIR filter design
procedure

1.  Select a suitable window function

2.  Specify an ideal response Hd(ω)

3.  Compute the coefficients of the ideal filter hd(n)

4.  Multiply the ideal coefficients by the window function to
give the filter coefficients

5.  Evaluate the frequency response of the resulting filter
and iterate if necessary (typically, it means increase M if
the constraints you have been given have not been
satisfied)
105

Step by Step Windowed Filter Design Example

Design a type I low-pass filter according to
the specification
passband frequency
ωp =0.2π
ωs =0.3π stopband frequency

δ1 =0.01
δ2 =0.01

106

Step 1. Select a suitable window function

Choosing a suitable window function can be done with the aid of
published data such as

The required peak error spec δ2 = 0.01, i.e. -20log10 (δs ) = - 40 dB
Hanning window
Main-lobe width ωs- ωp = 0.3π 0.2π = 0.1π, i.e. 0.1π = 8π / M
filter length M ≥ 80, filter order N ≥ 79
Type-I filter have even order N = 80
although for Hanning window first and last ones are 0 so only 78 in reality 107

Step 2 Specify the Ideal Response

Property 1: The band-edge frequency of the ideal response
if the midpoint between ωs and ωp

ωc = (ωs + ωp)/2 = (0.2π+0.3π)/2 = 0.25π

1 if |ω| ≤ 0.25π
0 if 0.25π < |ω|< π
our ideal low-pass filter
frequency response

108

Step 3 Compute the coefficients of the ideal filter

•  The ideal filter coefficients hd are given by the Inverse
Discrete time Fourier transform of Hd(ω)

•  Delayed impulse response (to make it causal)
N

•  Coefficients of the ideal filter

40
40
109

Step 3 Compute the coefficients of the
ideal filter

•  For our example this can be done analytically, but in
general (for more complex Hd (ω) functions) it will be
computed approximately using an N-point Inverse
Fast Fourier Transform (IFFT).

•  Given a value of N (choice discussed later), create a
sampled version of Hd (ω):

Hd(p) = Hd(2πp/N), p=0,1,...N-1.

[ Note frequency spacing 2π/N rad/sample ]

110

Step 3 Compute the coefficients of the
ideal filter
If the Inverse FFT, and hence the filter coefficients, are to be purely real-
valued, the frequency response must be conjugate symmetric:
Hd(-2πp/N) = Hd* (2πp/N) (1)

Since the Discrete Fourier Spectrum is also periodic, we see that
Hd(-2πp/N) = Hd(2π - 2πp/N) = Hd(2π(N-p)/N) (2)

Equating (1) & (2) we must set Hd(N-p) = Hd* (p) for p = 1, ..., (N/2-1).

The Inverse FFT of Hd*(p) is an N-sample time domain function h´(n).
For h´(n) to be an accurate approximation of h(n), N must be made large
enough to avoid time-domain aliasing of h(n), as illustrated below.
111

Time domain aliasing
Consider FFT and IFFT

The relationship (2) provides the reconstruction of the periodic signal
xn however it does not imply that we can recover xn from the samples.
For sequence xn of finite duration L this is only possible if N ≥ L

112

Step 4 Multiply to obtain the filter coefficients

•  Coefficients of the ideal filter

40
40

•  Multiplied by a Hamming window function

113

Step 5 Evaluate the Frequency Response and Iterate

The frequency response is computed as the DFT of the filter coefficient
vector.

If the resulting filter does not meet the specifications, one of the following
could be done
•  adjust the ideal filter frequency response (for example, move the
band edge) and repeat from step 2
•  adjust the filter length and repeat from step 4
•  change the window (and filter length) and repeat from step 4

114

Matlab Implementation of the Window Method

Two methods FIR1 and FIR2

B=FIR2(N,F,M)

Designs a Nth order FIR digital filter
F and M specify frequency and magnitude breakpoints
for the filter such that plot(N,F,M)shows a plot of
desired frequency
The frequencies F must be in increasing order between
0 and 1, with 1 corresponding to half the sample rate.
B is the vector of length N+1, it is real, has linear phase
and symmetric coefficients
Default window is Hamming – others can be specified
115

Multi-band Design

116

Frequency sampling method

117

FIR Filter Design Using Windows

FIR filter design based on windows is simple and robust,
however, it is not optimal:
•  The resulting pass-band and stop-band parameters
are equal even though often the specification is more
strict in the stop band than in the pass band
unnecessary high accuracy in the pass band

•  The ripple of the window is not uniform (decays as we
move away from discontinuity points according to
side-lobe pattern of the window)

by allowing more freedom in the ripple behaviour
we may be able to reduce filter’s order and hence
its complexity
118

FIR Design by Optimisation: Least-Square Method

We now present a method that approximates the desired frequency response by a linear-phase FIR
amplitude function according to the following optimality criterion.

The integral of the weighted square frequency-domain error is given by

ε 2 = ∫E2(ω)dω

and we assume that the order and the type of the filter are known. Under this assumptions designing
the FIR filter now reduces to determining the coefficients that would minimise ε 2 .
119

Recall Our Example

Design a type I low-pass filter according to specification

passband frequency
ωp =0.2π
ωs =0.3π stopband frequency

δ1 =0.1
But assume the
pass-band
δ2 =0.01 tolerance of 0.1

The filter designed using window method cannot benefit from this
relaxation, however, a least-square method design gives N = 33
(compared to N = 80).
120

Least-Square Design of FIR Filters

•  Meeting the specification is not guaranteed a-priori,
trial and error is often required. It might be useful to
set the transition bands slightly narrower than
needed, and it is often necessary to experiment with
the weights

•  Occasionally the resulting frequency response may
be peculiar. Again, changing the weights would help
to resolve the problem

121

Equiripple Design

The least-square criterion of minimising
ε 2 = ∫E2(ω)dω

is not entirely satisfactory.

A better approach is to minimize the maximum
error at each band

ε = maxω |E(ω)|

122

Equiripple Design

The method is optimal in a sense of minimising the maximum
magnitude of the ripple in all bands of interest, the filter order is
fixed

It can be shown that this leads to an equiripple filter – a filter which
amplitude response oscillates uniformly between the tolerance
bounds of each band

123

Equiripple Design

Many ripples achieve maximum
Passband
Permitted amplitude

Overall and passband-only frequency response of length 37
minimax filter

124 124

Remez method

•  There exists a computational procedure known as the
Remez method to solve this mathematical
optimization problem.

•  There are also exist formulae for estimating the
required filter length in the case of lowpass,
bandpass and narrow transition bandwidths.
However, these formulae are not always reliable so it
might be necessary to iterate the procedure so as to
satisfy the design constraints.

125

Equiripple Design: Weights

The weights can be determined in advance from a minimax specification.
For example, if a simple lowpass filter has a requirement for the passband
gain to be in the range 1-∂p to 1+∂p, and the stopband gain to be less than
∂s, the weightings given to the passband and stopband errors would be ∂s
and ∂p respectively.
The detailed algorithm is beyond the (time!) constraints of this module.

126 126

Equiripple Design: Example

Obtain the coefficients of an FIR lowpass digital filter to meet these
specifications:
passband edge frequency 1.625 kHz
passband pk-to-pk ripple <1 dB
transition width 0.5 kHz
stopband attenuation >50 dB
sampling frequency 8 kHz

The passband ripple corresponds to ±6%, while the stopband attenuation
is 0.32%, hence the weighting factors are set to 0.32 and 6.
Using the relevant length estimation formula gives order N=25.8 hence
N=26 was chosen, i.e. length =27. This proved to be substantially too
short, and it was necessary to increase the order to 36 (length 37) to meet
the specifications. 127

Equiripple Design: Matlab
b = remez(n,f,m) designs an nth order FIR digital filter and returns the filter
coefficients in length n+1 vector b.
Vectors f and m specify the frequency and magnitude breakpoints [as for FIR2].
b = remez(n,f,m,w) uses vector w to specify weighting in each of the pass or stop
bands in vectors f and m.
Note again the frequency normalisation, where 1.0 equals half the sample rate.
The call which finally met this filter specification was:
h = remez(36,[0 1.625 2 4]/4, [1 1 0 0], [0.32 6]);
The resulting frequency response is as shown previously:

128 128

The Parks-McClellan Remez exchange algorithm

The computational procedure the optimization problem is by
Remez

The algorithm in common use is by Parks and McClellan.

The Parks-McClellan Remez exchange algorithm is widely
available and versatile.

Important: it designs linear phase (symmetric) filters or
antisymmetric filters of any of the standard types
129 129

Linear Symmetric Filters
The frequency response of the direct form FIR filter may be rearranged by grouping the
terms involving the first and last coefficients, the second and next to last, etc.:

and then taking out a common factor exp( -jMΩ/2):

If the filter length M+1 is odd, then the final term in curly brackets above is the single term
bM/2, that is the centre coefficient ('tap') of the filter.
130

Symmetric impulse response

Symmetric impulse response: if we put bM = b0, bM-1 = b1, etc., and note that exp(jθ)
+exp(-jθ) = 2cos(θ), the frequency response becomes

This is a purely real function (sum of cosines) multiplied by a linear phase term, hence
the response has linear phase, corresponding to a pure delay of M/2 samples, ie half the
filter length.
A similar argument can be used to simplify antisymmetric impulse responses in terms of a
sum of sine functions (such filters do not give a pure delay, although the phase still has a
linear form π/2-mΩ/2)

131 131

Implementation of symmetric FIR filters

The symmetric FIR filters of length N can be implemented using the folded delay line
structure shown below, which uses N/2 (or (N+1)/2) multipliers rather than N

132 132

Limitations of the algorithm
Linear phase in the stopbands is never a real requirement, and in some
applications strictly linear phase in the passband is not needed either.

The linear phase filters designed by this method are therefore longer than
optimum non-linear phase filters.

However, symmetric FIR filters of length N can be implemented using the folded
delay line structure shown below, which uses N/2 (or (N+1)/2) multipliers rather
than N, so the longer symmetric filter may be no more computationally intensive
than a shorter non-linear phase one.

133 133

Further options for FIR filter design

More general non-linear optimisation (least squared error or minimax) can of course
be used to design linear or non-linear phase FIR filters to meet more general frequency
and/or time domain requirements.

Matlab has suitable optimisation routines.

134 134

Design of FIR filters

More Related Content

What's hot (20)

Similar to Design of FIR filters (20)

More from op205 (20)

Recently uploaded (20)

Design of FIR filters