Fiat kobelco e35.2 sr mini crawler excavator service repair manual

E30.2SR - E35.2SR
WORKSHOP MANUAL
ENGLISH
Pubblication Nr. 604.13.363
Edition 07/2004
English - Printed in Italy
Printed by Studio ti - 37504

SAFETY PRECAUTIONS
0-5
INDEX E30.2SR
E35.2SR
Title Index
No.
SPECIFICATIONS
OUTLINE 1
SPECIFICATIONS 2
ATTACHMENT DIMENSIONS 3
MAINTENANCE
TOOLS 11
STANDARD MAINTENANCE TIME TABLE 12
MAINTENANCE STANDARDS AND TEST PROCEDURES 13
SYSTEM
HYDRAULIC SYSTEM 22
ELECTRICAL SYSTEM 23
COMPONENTS SYSTEM 24
DISASSEMBLING
WHOLE DISASSEMBLING & ASSEMBLING 31
ATTACHMENTS 32
UPPER SLEWING STRUCTURE 33
TRAVEL SYSTEM 34
TROUBLESHOOTING
HYDRAULIC SYSTEM 42
ELECTRICAL SYSTEM 43
ENGINE 44
E/G
ENGINE 51
OPT.
DATA
SUPPORTING DATA 71
APPLICABLE MACHINES

1. OUTLINE
TABLE OF CONTENTS
1.1 GENERAL PRECAUTIONS FOR REPAIRS .....................................................1-3
1.1.1 PREPARATION BEFORE DISASSEMBLING ..............................................1-3
1.1.2 SAFETY IN DISASSEMBLING AND ASSEMBLING ....................................1-3
1.1.3 DISASSEMBLING AND ASSEMBLING HYDRAULIC EQUIPMENT ............1-3
1.1.4 ELECTRICAL EQUIPMENT ..........................................................................1-4
1.1.5 HYDRAULIC PARTS .....................................................................................1-5
1.1.6 WELDING REPAIR .......................................................................................1-5
1.1.7 ENVIRONMENTAL MEASURE .....................................................................1-5
1.2 INTERNATIONAL UNIT CONVERSION SYSTEM ............................................1-6

1. OUTLINE
1-3
1.1 GENERAL PRECAUTIONS FOR
REPAIRS
1.1.1 PREPARATION BEFORE DISASSEM-
BLING
(1) Understanding operating procedure
Read OPERATION & MAINTENANCE MANUAL
carefully to understand the operating procedure.
(2) Cleaning machines
Remove soil, mud, and dust from the machine be-
fore carrying it into the service shop to prevent loss
of work efficiency, damage of parts, and difficulty in
rust prevention and dust protection while reassem-
bling.
(3) Inspecting machines
Identify the parts to be disassembled before start-
ing work, determine the disassembling procedure
by yourself considering the workshop situations
etc., and request procurement of necessary parts in
advance.
(4) Recording
Record the following items for communication and
prevention of recurring malfunction.
1) Inspection date and place.
2) Model name, applicable machine number, and
hour meter read.
3) Trouble condition, place and cause.
4) Visible oil leakage, water leakage and damage.
5) Clogging of filters, oil level, oil quality, oil con-
tamination and loosening of connections.
6) Result of consideration if any problem exists
based on the operation rate per month calculat-
ed from hour meter indication after the last in-
spection date.
(5) Arrangement and cleaning in service shop
1) Tools required for repair work.
2) Prepare space to place the disassembled parts.
3) Prepare oil containers for draining oil etc.
1.1.2 SAFETY IN DISASSEMBLING AND AS-
SEMBLING
(1) Wear appropriate clothes with long sleeves, safety
shoes, safety helmet and protective glasses.
(2) Suspend warning tag "DO NOT OPERATE" from
the doorknob or the operating lever, and have a
preliminary meeting before starting work.
(3) Stop the engine before starting inspection and
maintenance to prevent the operator being caught
in machine.
(4) Identify the location of a first-aid kit and a fire extin-
guisher, and also where to make contact in a state
of emergency.
(5) Choose a hard, level and safe place, and place the
attachment on the ground securely.
(6) Use a lifter such as a crane to remove heavy parts
(20 kg [45 lbs] or more) from the machine.
(7) Use proper tools, and replace or repair defective
tools.
(8) Support the machine and attachment with supports
or blocks if the work is performed in the lifted condi-
tion.
1.1.3 DISASSEMBLING AND ASSEMBLING HY-
DRAULIC EQUIPMENT
(1) Removing hydraulic equipment
1) Before disconnecting pipes, release the hy-
draulic pressure of the system, or open the re-
turn side cover and take out the filter.
2) Carefully drain oil of the removed pipes into a
containers without spilling on the floor.
3) Apply plugs or caps on the pipe ends to avoid
oil spillage and dust intrusion.
4) Clean off the external surface of the equipment
before disassembling, and drain hydraulic and
gear oil before placing it on the workbench.
(2) Disassembling hydraulic equipment
1) Do not disassemble, reassemble or modify the
hydraulic equipment without the permission of
the manufacturer, who is not responsible for the
performance and function of the product after
modification.
2) When disassembling and reassembling for un-
avoidable reason, refer the work to qualified
personnel who have the specific knowledge or
completed the parts service training.
3) Provide matching marks to facilitate reassem-
bling work.
4) Before starting the work, read the manual of
disassembling procedure, if it is provided, and
decide whether the work can be performed by
yourself.

1. OUTLINE
1-4
5) Use the special jig and tools without fail if they
are specified.
6) If it is hard to remove a part according to the
procedure, do not try it by force but investigate
the cause.
7) Place the removed parts in order and attach
tags to facilitate the reassembling.
8) Note the location and quantity of parts com-
monly applied to multiple locations.
(3) Inspecting parts
1) Ensure that the disassembled parts are free
from seizure, interference and uneven contact.
2) Measure and record wear condition of parts
and clearance.
3) If the problem is found in a part, repair or re-
place it with a new one.
(4) Reassembling hydraulic equipment
1) Turn ON the ventilation fan or open windows to
maintain good ventilation prior to starting the
cleaning of parts.
2) Perform rough and finish cleaning before as-
sembling.
3) Remove washing oil by air and apply clean hy-
draulic or gear oil for assembling.
4) Always replace the removed O-rings, backup
rings and oil seals with new ones by applying
grease in advance.
5) Remove dirt and moisture from and perform de-
greasing on the surface where liquid gasket to
be applied.
6) Remove rust preventive agent from the new
parts before use.
7) Fit bearings, bushings and oil seals using spe-
cial jigs.
8) Assemble the parts utilizing matching marks.
9) Ensure all the parts are completely assembled
after the work.
(5) Installing hydraulic equipment
1) Ensure hydraulic oil and lubricant are properly
supplied.
2) Perform air bleeding when:
1. Hydraulic oil changed
2. Parts of suction side piping replaced
3. Hydraulic pump installed
4. Slewing motor installed
5. Travel motor installed
6. Hydraulic cylinder installed
SWARNING
Operation of the hydraulic equipment with-
out filling hydraulic oil or lubricant or with-
out performing air bleeding will result in
damage to the equipment.
3) Perform air bleeding of the hydraulic pump and
slewing motor after loosening the upper drain
plug, starting the engine and keep it in low idle
condition.
Complete the air bleeding when seeping of hy-
draulic oil is recognized, and tightly plug.
4) Perform air bleeding of the travel motor and the
hydraulic cylinders by running the engine for
more than 5 minutes at low speed without load.
SWARNING
Do not allow the hydraulic cylinder to bot-
tom on the stroke end just after the mainte-
nance.
5) Perform air bleeding of pilot line by performing
a series of digging, slewing and travel.
6) Check hydraulic oil level after placing the at-
tachment to the oil check position, and replen-
ish oil if necessary.
1.1.4 ELECTRICAL EQUIPMENT
(1) Do not disassemble electrical equipment.
(2) Handle it carefully not to drop and give a shock.
(3) Turn the key OFF prior to connecting and discon-
necting work.
(4) Disconnect the connector by holding it and press-
ing the lock. Do not pull the wire to apply force to the
caulking portion.
(5) Connect the connector and ensure it is completely
locked.
(6) Turn the key OFF prior to touching the terminal of
starter or generator.
(7) Remove the ground (earth) terminal of battery
when handling tools around the battery or its relay.
(8) Do not splash water on the electrical equipment
and connectors during machine washing.
(9) Check for moisture adhesion inside the waterproof
connector after pulling it out, since it is hard to re-
move moisture from the connector.

1. OUTLINE
1-5
If moisture adhesion is found, dry it completely be-
fore the connection.
SWARNING
Battery electrolyte is hazardous.
Battery electrolyte is dilute sulfuric acid. Exposure
of skin or eyes to this liquid will cause burning or
loss of eyesight.
If the exposure occurs, take the following emergen-
cy measures and seek the advice of a medical spe-
cialist.
• When skin exposed:
Wash with water and soap sufficiently.
• When eyes exposed:
Immediately wash away with city water continu-
ously for more than 10 minutes.
• When a large amount of the liquid flows out:
Neutralize with sodium bicarbonate or wash
away with city water.
• When swallowed:
Drink a large amount of milk or water.
• When clothes exposed:
Immediately undress and wash.
1.1.5 HYDRAULIC PARTS
(1) O-ring
• Ensure O-rings have elasticity and are not dam-
aged before use.
• Use the appropriate O-rings. O-rings are made
of various kinds of materials having different
hardness to apply to a variety of parts, such as
the part for moving or fixed portion, subjected to
high pressure, and exposed to corrosive fluid,
even if the size is same.
• Fit the O-rings without distortion and bend.
• Always handle floating seals as a pair.
(2) Flexible hose (F hose)
• Use the appropriate parts. Different parts are
used depending on the working pressure even
the size of fitting and the total length of the hose
is same.
• Tighten the fitting at the specified torque.
Ensure no kink, tension, interference nor oil
leakage is recognized.
1.1.6 WELDING REPAIR
(1) Refer repair welding to qualified personnel accord-
ing to the appropriate procedure.
(2) Disconnect the ground (earth) cable of the battery
before starting the repair.
Failure to do so will cause damage to the electrical
equipment.
(3) Move away the articles in advance that may cause
fire if exposed to sparks.
(4) Before starting the repair of the attachment, do not
fail to cover the plated surface of the piston rod with
flameproof sheet to prevent it from being exposed
to sparks.
1.1.7 ENVIRONMENTAL MEASURE
(1) Run the engine at the place that is sufficiently ven-
tilated.
(2) Industrial waste disposal
Dispose of the following parts according to the rel-
evant regulations:
Waste oil and waste container
Battery
(3) Precautions for handling hydraulic oil
Exposure of eyes to hydraulic oil will cause inflam-
mation. Wear protective glasses before handling to
avoid an accident. If an eye is exposed to the oil,
take the following emergency measures:
• When an eye exposed:
Immediately wash away with city water suffi-
ciently till stimulative feeling vanishes.
• When swallowed:
Do not let vomit, and receive medical treatment
immediately.
• When skin exposed:
Wash with water and soap sufficiently.
(4) Others
Use replacement parts and lubricants authorized as
the genuine parts.

1. OUTLINE
1-6
1.2 INTERNATIONAL UNIT CON-
VERSION SYSTEM
(Based on MARKS’ STANDARD
HANDBOOK FOR MECHANI-
CAL ENGINEERS)
Introduction
Although this manual includes International System of
Unit and Foot-Pound System of Units, if you need SI
unit, refer to the following international system of units.
Given hereinafter is an excerpt of the units that are re-
lated to this manual.
1. Etymology of SI Unites
French: Le Systeme International d’ Unites
English: International System of Units
2. Construction of SI Unit System
(1) Base units
(2) Supplementary units
(3) Derived Units
(4) Derived Units bearing Peculiar Designations
Table 1-1
QUANTITY UNIT SYMBOL
Length meter m
Mass kilogram kg
Time second s
Electric current ampere A
Thermodynamic
temperature
kelvin K
Amount of
substance
mol mol
Luminous
intensity
candela cd
Table 1-2
Plane angle radian rad
Solid angle steradian sr
Base units
Table 1-1
Derived units
of base units
Table 1-2
Supplemen-
tary units
Table 1-2
Derived
units
Derived units
bearing peculiar
designations
Table 1-4
Prefixes of SI
(n-th power of 10, where n is an integer)
Table 1-5
SI units
SI unit
system
Table 1-3
Area square meter m2
Volume cubic meter m3
Velocity meter per second m/s
Acceleration meter per second squared m/s2
Density kilogram per cubic meter kg/m3
Table 1-4
QUANTITY UNIT SYMBOL FORMULA
Frequency hertz Hz 1/s
Force newton N kg • m/s 2
Pressure and
Stress
pascal Pa N/m2
Energy, Work
and Quantity of
heat
joule J N•m
Power watt W J/s
Quantity of
electricity
coulomb C A•s
Electric
potential
difference,
Voltage, and
Electromotive
force
volt V W/A
Quantity of
static
electricity and
Electric
capacitance
farad F C/V
Electric
resistance
ohm V/A
Celsius
temperature
celsius
degree or
degree
C (t+273.15)K
Illuminance lux lx lm/m2

1. OUTLINE
1-7
(5) Prefixes of SI
(6) Unit Conversion
*1 Units that are allowed to use.
Table 1-5
PREFIX SYMBOL MULTIPLICATION FACTORS
giga G 109
mega M 106
kilo k 103
hecto h 102
deca da 10
deci d 10–1
centi c 10–2
milli m 10–3
micro µ 10–6
nano n 10–9
pico p 10–12
Table 1-6
QUANTITY Gravitationa
l
SI CONVERSION
FACTOR
Mass kg kg
Force kgf N 1 kgf = 9.807 N
Torque kgf•m N•m kgf•m = 9.807 N•m
Pressure kgf/cm2 MPa 1 kgf/cm2 = 0.09807 MPa
Motive
Power
PS kW 1 PS = 0.7355 kW
Revolution rpm min–1
r/min *1

2. SPECIFICATIONS
TABLE OF CONTENTS
2.1 COMPONENTS NAME .....................................................................................2-3
2.2 MACHINE DIMENSIONS ..................................................................................2-4
2.3 SPECIFICATIONS AND PERFORMANCE .......................................................2-6
2.4 MACHINE & COMPONENTS WEIGHT (DRY) .................................................2-7
2.5 TRANSPORTATION .........................................................................................2-9
2.6 TYPE OF CRAWLER SHOES ........................................................................2-11
2.7 TYPE OF BUCKET .........................................................................................2-11
2.8 ENGINE SPECIFICATIONS ............................................................................2-13
2.8.1 SPECIFICATIONS ......................................................................................2-13
2.8.2 ENGINE PERFORMANCE CURVE ............................................................2-14

2. SPECIFICATIONS
2-3
2.1 COMPONENTS NAME
No. NAME No. NAME No. NAME No. NAME
1 Engine 2 Oil filter 3 Radiator 4 Reservoir tank
5 Air cleaner 6 Muffler 7 Fuel tank 8 Hydraulic reservoir
9 Hydraulic pump 10 Slewing motor 11 Swing cylinder 12 Control valve
13 Travel lever 14 Safety lock lever 15 Canopy 16 Operating lever
17 Dozer operating lever 18 Throttle lever 19 Monitor panel (gauge cluster)
20 Battery 21 Swivel joint 22 Travel motor 23 Slewing bearing
24 Idler assy 25 Lower roller 26 Upper roller 27 Rubber track
28 Dozer blade 29 Dozer cylinder 30 Boom 31 Boom cylinder
32 Dipper cylinder 33 Light 34 Dipper 35 Link
36 Bucket cylinder 37 Bucket
11
28
27
24
25
26
22
32 33
30
31
12
36
34
35
37
1
2
8
16
17
18
19
3
4
5
6
15
7
20
21
9
10
13
14
23
29

2. SPECIFICATIONS
2-4
2.2 MACHINE DIMENSIONS
Unit: mm (ft•in)
(1) E30.2SR (CANOPY)
(2) E30.2SR (CAB)
345
(13.6")
345
(13.6")
2550 (8’4.4")
2000 (6’6.7")
1540 (5’0.6")
570
(1’10.4")
2570
(8’5.2")
1550 (5’1.0")
1550 (5’1.0")
775 (2’6.5")
1380 (4’6.3")
1840 (6’0.44")
4390 (14’4.8")
1550 (5’1.0")
300
(11.8") 1250 (4’1.2")
1550 (5’1.0")
330
(13.0")
R775
(2’6.5")
85
(3.3")
50
(2.0")
660
(2’2.0")
1550
(5’1.0")
660
(2’2.0")
185(7.28")
2550 (8’4.4")
2000 (6’6.7")
1540 (5’0.6")
570
(1’10.4")
2570
(8’5.2")
775 (2’6.5")
1380 (4’6.3")
1840 (6’0.44")
4390 (14’4.8")
1550 (5’1.0")
300
(11.8") 1250 (4’1.2")
1550 (5’1.0")
330
(13.0")
R775
(2’6.5")
85
(3.3")
50
(2.0")
660
(2’2.0")
660
(2’2.0")
1550
(5’1.0")
345
(13.6")
345
(13.6")
185(7.28")
1550 (5’1.0")

2. SPECIFICATIONS
2-5
Unit: mm (ft•in)
(3) E35.2SR (CANOPY)
(4) E35.2SR (CAB)
2680 (8’9.5")
2150 (7’0.6")
1700 (5’6.9")
570
(1’10.4")
2570
(8’5.2")
850 (2’9.5")
1460 (4’9.5")
1910 (6’3.2")
4710 (15’5.4")
1550 (5’1.0")
300
(11.8") 1400 (4’7.1")
1700 (5’6.9")
330
(13.0")
R850
(2’9.5")
60
(2.4")
50
(2.0")
1700
(5’6.9")
660
(2’2.0")
660
(2’2.0")
345
(13.6")
345
(13.6")
160(6.3")
1600 (5’3.0")
2680 (8’9.5")
2150 (7’0.6")
1700 (5’6.9")
570
(1’10.4")
2570
(8’5.2")
850 (2’9.5")
1460 (4’9.5")
1910 (6’3.2")
4710 (15’5.4")
1550 (5’1.0")
300
(11.8") 1400 (4’7.1")
1700 (5’6.9")
330
(13.0")
R850
(2’9.5")
60
(2.4")
50
(2.0")
660
(2’2.0")
660
(2’2.0")
1700
(5’6.9")
345
(13.6")
345
(13.6")
160(6.3")
1600 (5’3.0")

2. SPECIFICATIONS
2-6
2.3 SPECIFICATIONS AND PERFORMANCE
SPEED AND GRADEABILITY
ENGINE
HYDRAULIC COMPONENTS
SIDE DIGGING & DOZER
WEIGHT
Note: This figure is calculated with standard bucket.
Model E30.2SR E35.2SR
Applicable Machines PW11-30001~ PX12-11001~
Shoe Type Rubber shoe Iron shoe (OPT) Rubber shoe Iron shoe (OPT)
Slewing Speed min-1 {rpm} 8.9 {8.9} 8.9 {8.9}
Travel Speed km/h (mph)
Low
(1st)
High
(2nd)
Low
(1st)
High
(2nd)
Low
(1st)
High
(2nd)
Low
(1st)
High
(2nd)
2.5 4.5 2.5 4.5 2.5 4.5 2.5 4.5
Gradeability % (degree) 58 (30)
Model (YANMAR) 3TNV88-PYB
Type Water-cooled, 4-cycle type Swirl chamber type diesel engine
Number of cylinders-Bore × Stroke 3 - ø88 mm × 90 mm (3.46 in × 3.54 in)
Total Displacement L 1.642 (100.2 cu•in)
Output Rating kW/min-1 {PS/rpm} 21.2 / 2400 {29 / 2400}
Maximum Torque
N•m/min-1
(lbf•ft/rpm)
98.4 / 1440 (72.6 / 1440)
Starting Motor V × kW 12 × 1.7
Generator V × A 12 × 55
Hydraulic Pump Variable displacement axial piston + gear pump
Hydraulic Motor Axial piston
Hydraulic Motor w/Reducer (Travel) 2-Axial piston, 2-Speed motor
Control Valve 10-spool multiple control valve
Cylinder (Boom, Dipper, Swing, Bucket, Doz-
er)
Double action cylinder
Return Filter Safety valve containing/Filter Type (30µ)
Type Boom swing by hydraulic cylinder
Boom Swing Angle
Right 60°
Left 70°
Stroke of Dozer (above/below) mm (in) 560 / 410 (22.0/16.1) 540 / 440 (21.3 / 17.3)
Machine Weight kg (lb)
Rubber shoe Iron shoe Rubber shoe Iron shoe
3,000 (6620) 3,110 (6860) 3,580 (7900) 3,700 (8160)
Upper slewing body kg (lb) 1,650 (3640) ← 1,900 (4190) ←
Travel system kg (lb) 1,050 (2320) 1,160 (2560) 1,140 (2520) 1,260 (2780)
Attachment
(Boom+STD Dipper+STD Bucket)
kg (lb) 370 (815) 460 (1020)
Oil & Water kg (lb) 80 (175) ←

2. SPECIFICATIONS
2-7
2.4 MACHINE & COMPONENTS WEIGHT (DRY)
Note: Bucket weight is shown with standard bucket weight.
Unit: kg (lb)
MODEL
E30.2SR
RUBBER SHOE IRON SHOE
CANOPY CAB CANOPY CAB
COMPLETE MACHINE 3000 (6620) 3140 (6930) 3110 (6860) 3250 (7170)
UPPER FRAME ASSEMBLY (ASSY OF FOLLOWINGS) 1650 (3640) 1790 (3950) 1650 (3640) 1790 (3950)
UPPER FRAME 375 (825) ← ← ←
CANOPY / CAB 85 (187) 220 (485) 85 (187) 220 (485)
ENGINE 155 (340) ← ← ←
HYDRAULIC PUMP 28 (60) ← ← ←
RADIATOR 3 (7) ← ← ←
HYDRAULIC TANK 42 (93) ← ← ←
FUEL TANK 4 (9) ← ← ←
SWING BRACKET 93 (205) ← ← ←
SWING CYLINDER 37 (82) ← ← ←
SLEWING MOTOR 38 (84) ← ← ←
CONTROL VALVE 25 (55) ← ← ←
COUNTERWEIGHT 370 (815) ← ← ←
GUARD • BONNET 92 (203) ← ← ←
BOOM CYLINDER 35 (77) ← ← ←
LOWER FRAME ASSEMBLY (ASSY OF FOLLOWINGS) 1050 (2320) ← 1160 (2560) ←
LOWER FRAME 310 (685) ← ← ←
SLEWING BEARING 42 (93) ← ← ←
TRAVEL MOTOR 42×2 (93×2) ← ← ←
LOWER ROLLER 6× 8 (13× 8) ← ← ←
FRONT IDLER 27 ×2 (60×2) ← ← ←
IDLER ADJUSTER 14×2 (31×2) ← ← ←
SPROCKET 9×2 (20×2) ← ← ←
RUBBER CRAWLER SHOE
125 ×2
(275×2)
← — —
300 mm (11.8") IRON SHOE — —
180×2
(395×2)
←
SWIVEL JOINT 22 (49) ← ← ←
DOZER 140 (310) ← ← ←
DOZER CYLINDER 27 (60) ← ← ←
ATTACHMENT ASSEMBLY (ASSY OF FOLLOWINGS) 370 (815) ← ← ←
BOOM ASSEMBLY 170 (375) ← ← ←
BOOM 120 (265) ← ← ←
DIPPER CYLINDER 30 (66) ← ← ←
DIPPER ASSEMBLY 120 (265) ← ← ←
DIPPER 70 (155) ← ← ←
BUCKET CYLINDER 20 (44) ← ← ←
BUCKET LINK 10 (22) ← ← ←
IDLER LINK 4×2 (9×2) ← ← ←
BUCKET ASSEMBLY (STD) 81 (180) ← ← ←
FLUIDS (ASSY OF FOLLOWINGS) 80 (176) ← ← ←
HYDRAULIC OIL 42 (93) ← ← ←
FUEL 32 (70) ← ← ←
COOLANT 4 (9) ← ← ←

2. SPECIFICATIONS
2-8
Note: Bucket weight is shown with standard bucket weight.
Unit: kg (lb)
MODEL
E35.2SR
RUBBER SHOE IRON SHOE
CANOPY CAB CANOPY CAB
COMPLETE MACHINE 3580 (7900) 3720 (8210) 3700 (8160) 3840 (8470)
UPPER FRAME ASSEMBLY
(ASSY OF FOLLOWINGS)
1900 (4190) 2040 (4500) 1900 (4190) 2040 (4500)
UPPER FRAME 375 (825) ← ← ←
CANOPY / CAB 85 (187) 220 (485) 85 (187) 220 (485)
ENGINE 155 (340) ← ← ←
HYDRAULIC PUMP 28 (60) ← ← ←
RADIATOR 3 (7) ← ← ←
HYDRAULIC TANK 42 (93) ← ← ←
FUEL TANK 4 (9) ← ← ←
SWING BRACKET 93 (205) ← ← ←
SWING CYLINDER 37 (82) ← ← ←
SLEWING MOTOR 38 (84) ← ← ←
CONTROL VALVE 25 (55) ← ← ←
COUNTERWEIGHT 665 (1470) ← ← ←
GUARD • BONNET 92 (203) ← ← ←
BOOM CYLINDER 35 (77) ← ← ←
LOWER FRAME ASSEMBLY (ASSY OF FOLLOWINGS) 1140 (2520) ← 1260 (2780) ←
LOWER FRAME 370 (815) ← ← ←
SLEWING BEARING 42 (93) ← ← ←
TRAVEL MOTOR 42 ×2 (93×2) ← ← ←
LOWER ROLLER 6 ×8 (13×8) ← ← ←
FRONT IDLER 27×2 (60×2) ← ← ←
IDLER ADJUSTER 14×2 (31×2) ← ← ←
SPROCKET 9×2 (20×2) ← ← ←
RUBBER CRAWLER SHOE
134 ×2
(295×2)
← — —
300 mm (11.8") IRON SHOE — —
190 ×2
(420×2)
←
SWIVEL JOINT 22 (49) ← ← ←
DOZER 150 (330) ← ← ←
DOZER CYLINDER 27 (60) ← ← ←
ATTACHMENT ASSEMBLY (ASSY OF FOLLOWINGS) 460 (1020) ← ← ←
BOOM ASSEMBLY 190 (420) ← ← ←
BOOM 140 (310) ← ← ←
DIPPER CYLINDER 34 (75) ← ← ←
DIPPER ASSEMBLY 140 (310) ← ← ←
DIPPER 80 (175) ← ← ←
BUCKET CYLINDER 20 (44) ← ← ←
BUCKET LINK 10 (22) ← ← ←
IDLER LINK 4 ×2 (9×2) ← ← ←
BUCKET ASSEMBLY (STD) 89 (196) ← ← ←
FLUIDS (ASSY OF FOLLOWINGS) 80 (176) ← ← ←
HYDRAULIC OIL 42 (93) ← ← ←
FUEL 32 (70) ← ← ←
COOLANT 4 (9) ← ← ←

2. SPECIFICATIONS
2-9
2.5 TRANSPORTATION
(1) LOADING MACHINE ON A TRAILER
1) Keep trailer bed clean. Put chocks against truck wheels.
2) Use a ramp or loading deck. Ramps must be strong enough, have a low angle, and correct height. Load and
unload machine on a level surface.
3) Travel machine onto ramps slowly. Center the machine over the trailer.
4) Lower all attachment.
5) Stop engine. Remove key from switch.
SWARNING
Do not put chains over or against hydraulic lines or hoses.
6) Fasten machine to trailer with chains or cables.
During transportation, the bucket or attachments may hit the canopy or the cab. Therefore, set the machine in
the transporting position by observing following points:
1. Extend the bucket cylinder fully.
2. Extend the dipper cylinder fully.
3. Lower the boom.
4. If machine cannot be transported with dipper cylinder fully extended, remove bucket or attachment and ex-
tend dipper cylinder.
(2) TRANSPORTATION DIMENSION AND WEIGHT OF ATTACHMENT
1) BOOM WITH DIPPER CYLINDER
2) DIPPER & BUCKET
L × H × W
mm (ft•in)
2390 × 870 × 320
(7’10.1") (2’10.2") (12.6")
2590 × 810 × 320
(8’6.0") (2’7.9") (12.6")
Weight w/dipper cyl. kg
(lb)
163 (360) 184 (405)
L × H × W
mm (ft•in)
2190 × 450 × 500
(7’2.2") (17.7") (19.7")
2360 × 450 ×600
(7’8.9") (17.7") (1’11.6")
Weight kg (lb) 198 (435) 219 (485)
L
H
L
H

2. SPECIFICATIONS
2-10
3) DIPPER
4) BUCKET
5) DOZER
w/o cylinder weight
L × H × W
mm (ft•in)
1520 × 430 × 280
(4’11.8") (16.9") (11.0")
1690 × 430 ×280
(5’6.5") (16.9") (11.0")
Weight kg (lb) 101 (225) 123 (270)
Heaped capacity
m3(cu•yd)
0.09 (0.118) 0.11 (0.144)
L × H × W
mm (in)
670 × 620 × 500
(2’2.4") (2’0.4") (19.7")
670 × 620 × 600
(2’2.4") (2’0.4") (1’11.6")
Weight kg (lb) 81 (180) 89 (196)
L × H × W
mm (in)
1230 × 330 × 1550
(4’0.4") (13.0") (5’1.0")
1280 × 330 × 1700
(4’2.4") (13.0") (5’6.9")
Weight kg (lb) 142 (315) 150 (330)
L
H
L
H
L
H

Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.

2. SPECIFICATIONS
2-11
2.6 TYPE OF CRAWLER SHOES
2.7 TYPE OF BUCKET
Type Model
Shoe width
mm (in)
Total Crawler
width
mm (ft•in)
Number of
Link
Ground pressure
kPa (psi)
CANOPY CAB
Rubber shoe
E30.2SR 300 (11.8") 1550 (5’1.0") 82 29 (4.2) 30 (4.4)
E35.2SR 300 (11.8") 1700 (5’6.9") 88 31 (4.5) 32 (4.6)
Iron shoe (option)
E30.2SR 300 (11.8") 1550 (5’1.0") 42 31 (4.5) 32 (4.6)
E35.2SR 300 (11.8") 1700 (5’6.9") 45 32 (4.6) 33 (4.8)
TYPE DIPPER
Width mm (in)
Heaped
capacity
m3
(cu.yd)
(ISO 7451)
Weight kg (lb)
E30.2SR
Length
1520 mm
(4’11.84” in)
E35.2SR
Length
1690 mm
(5’6.53” in)
Digging buckets 350 (1’1.78”) 0.050 (0.06) 66.77 (147.20) l l
Cleaning buckets 1000 (3’3.37”) 0.160 (0.21) 69.04 (152.20) n m u n m u

2. SPECIFICATIONS
2-12
SWARNING
◆ The buckets with this length, during left dipper slewing higher than 1 m from ground, can interfere with the cabin.
For a safe use, consult the Dealer and ask for left slewing limiter of the dipper support.
●: Width with lateral cutter
❍: Width without lateral cutter
: Generic digging
for digging and sand loading operations, gravel, clay, earth in general, etc..
The specific weight of the material should not be higher than 1400 kg/m3
.
■: Digging for light applications for operations of digging,sand loading/unloading of gravel, clay, earth in friabile and
dry state, ditch cleaning, etc.

Fiat kobelco e35.2 sr mini crawler excavator service repair manual

More Related Content

More from fhsejkdkme (20)

Recently uploaded (20)

Fiat kobelco e35.2 sr mini crawler excavator service repair manual