How to-install-sql-server-2008

SQL Server Club – grow your knowledge
www.sqlserverclub.com
How to Install SQL Server 2008
A Step by Step guide to installing SQL Server 2008 simply and successfully
with no prior knowledge
Developers and system administrators will find this installation guide useful, as will
seasoned DBAs. It will teach you the basics required for a typical, problem-free
installation of SQL Server 2008, allowing you to add other components later if you
wish.
Remember to install the .Net Framework 3.5
Before you start the installation, you’ll need to install the .Net 3.5 Framework. This
comes pre-installed on Windows 2008 Server, but for earlier versions of Windows,
you’ll need to install it first. This is a straightforward pre-requisite and is usually
included as part of the SQL Server 2008 installation. However, if you don’t know how
to do this, or for some reason you need to download it, check out the guide Installing
.Net Framework 3.5 for SQL Server 2008, also on SQL Server Club.
Once this Framework in installed you can commence the installation of SQL Server
2008.
STEP 1 : Copy the installation files
First off I’d recommend you copy the entire directory structure from the SQL Server
2008 installation disc to the C: drive of the machine you are going to install it on.
Although this means you need to grab a cup of coffee whilst it’s copying, this has
three advantages:
• It makes the installation process much faster than running it from CD/DVD
once it gets started.
• It allows you to easily add or remove components later, without having to
hunt around for the CD/DVD.
• If your media is damaged and a file won’t copy, you get to find out now,
rather than halfway through the installation.

Here’s what my system looks like after the copy:
STEP 2 : Setup.exe
Double click on the setup.exe file.
After a few seconds a dialog box appears:

This will disappear from the screen and then the main installation page appears:

STEP 3 : SQL Server Installation Center
Click on the Installation hyperlink on the left hand side of the screen:

STEP 4 : SQL Server Installation Center
Click on the "New Server stand-alone installation" link on the right side of the
screen:
The following dialog appears on the screen whilst the install program prepares for
installation:
After a minute or so (the timing will vary according to your system), the following
screen appears:

STEP 5 (optional) :
If any checks have failed, click on the Show details button or "View detailed
report link" to find out the cause, correct it, then click on the Re-run button to
perform the checks again.
STEP 6 : Product key
If all checks have passed, click on the OK button. After a few moments, the option
to select the edition and to enter the licence key (or “product key”) will appear. Note
that the product key box may already be populated, depending on which edition you
have. Don’t enter the product key we’ve shown here, it won’t work on your system!:

STEP 7 : Licence Terms
Enter the product key into the box, or choose the free edition if you're evaluating
SQL Server 2008, and click on the Next button:
Click in the "I accept the license terms" check box, then click on the Next
button again.

STEP 8 : Setup Support Files
The following screen appears; click on the Install button:

The following screen will appear whilst Windows Installer prepares itself for the
installation. This will take a short while:
After 30 seconds or so the dialog appears again:

STEP 9 : Setup Support Rules
If all is well, the following screen appears:
Click on the Next button again.

STEP 10 : Feature Selection
Select the features you want to install.
At a minimum, the following are useful (I'd argue essential), but what you need will
depend on your needs:
Click on the Next button.

STEP 11 : Instance Configuration
After a short while the following screen appears:
For most installations, keep the default settings.
Click on the Next button.

STEP 12 : Disk Space Requirements
This screen just tells you if you have sufficient disk space on the drive you’re
installing to, and what’s going to be installed where.
Click on Next.

STEP 13 : Server Configuration
This step allows you to set up the service accounts that will be used to run SQL
Server. If you have created Windows NT or Active Directory accounts for use with
services, use these.
If not, then just to get the installation up and working, use the built-in Network
Service account for all three services listed (this account does not require a
password).
This allows SQL Server to start up after installation. However, it can be easily
changed later to another account through the Services applet (Control Panel ->
Administrator Tools -> Services):
In addition, remember to change the Startup Type to Automatic, for all three
services. This automatically starts the SQL Server database engine, SQL Agent and
SQL Browser services when the server is re-booted.
The first service runs the SQL Server database engines executable process. The
other two services allow scheduled jobs to run after installation (and after a re-boot),
and allow the SQL Server to be found by clients on the network.
Do not worry about changing the collation tab, unless there is a specific requirement
for anything other than the default collation sequence.
Finally, Click on Next.

STEP 14 : Database Engine Configuration – Account Provision
This screen allows you to set up database engine security.
Change the Authentication Mode to Mixed Mode unless you are certain you only
need Windows-only authentication.
• Many third party applications rely on SQL Server logins to operate
correctly, so if you are setting up a server for a third party
application, rather than one developed in-house, enabling Mixed Mode
authentication is a good idea.
If you pick Mixed Mode security, you must also enter a password for the sysadmin
account (sa).
Enter and confirm a secure password for the sa account and keep it somewhere safe.
Do not give it to any one you do not want to have access to the SQL Server.
Note that you MUST also provide a Windows NT account on the local machine as a
SQL Server administrator. If you do not want Windows system administrators to be
able walk up to the box and login to SQL Server, create a new, local, dummy
Windows user and add this account instead. Otherwise, add in the local administrator
account, or your own Windows account on the domain in which the SQL Server will
reside.

STEP 15 : Database Engine Configuration – Data Directories
Click on the Data Directories tab.
Change the directories to specify which drives in your system will be used for the
various types of database files.
Generally it’s advisable to put the User database directory and User log directory on
separate physical drives for performance, but it will depend on how Windows has
been configured and how many disk drives you have available.
If you are installing on a single drive laptop or desktop, then simply specify:
Data root directory C:Program FilesMicrosoft SQL Server
User database directory C:Data
User log directory C:Logs
Temp DB directory C:TempDB
Temp Log directory C:TempDB
Backup directory C:Backups
Do not click on the FILESTREAM tab unless you know you need to change these
options, as it is not generally required for most installations, but can easily be
changed by using sp_configure 'filestream_access_level', '<level>'after SQL Server
has been installed. Click on Next.

STEP 16 : Error Usage Reporting
This screen simply asks if you want to send error information to Microsoft and can
safely be skipped if you do not want to share any information.
Click boxes if you want to help Microsoft help you.
Click on Next again…

STEP 16 : Installation Rules
This screen simply checks if there are any processes or other installations running
which will stop the installation of SQL Server 2008.
Click on Next again – you’re almost ready to install:

STEP 17 : Ready to Install
This screen summarises what you are about to install and gives you a last chance to
cancel or change anything that’s wrongly configured:
Check that what’s being installed is what you want and then click on Install when
you’re sure you want to start the installation process:

Installation Progress
SQL Server 2008 will now install. How long it takes depends on the speed of your
machine, what load it’s under, the installation media (CD is slower) and what you’ve
chosen to install.

…More Installation Progress
… and Finally
Finally, the installation will complete:

…and the following dialog box will appear:
Click on OK, the machine will NOT reboot.
The following will appear:

…followed by:
Click on the Next button again…

STEP 18 : Installation Complete
The following screen appears:
It may be worth clicking on the installation log at the top of the screen to check
everything’s gone as expected. Not that this is MUCH smaller than the usual SQL
Server installation log files of old.
Finally, click on the Close button. The following dialog will appear:
Click on OK – your server will NOT re-boot at this point.

The dialog box will disappear and you will be returned to the Installation Center:
Click on the Close button (the “x”) in the top right of the screen.
Finally, manually reboot your machine to complete the SQL Server 2008 installation.

Top Tips :
How to check that SQL Server 2008 has installed correctly
Here are a short number of post-installation checks which are useful to perform after
re-booting your new SQL Server. You don’t have to run these, and there are other
ways to check, but they are very useful for non-DBAs to be sure that the installation
is basically sound and a connection can be made to the new SQL Server before
handing it over to someone else.
Check 1: Has the SQL Server Service Started?
Check SQL Server 2008 has started.
Check 2: Does Management Studio Work?
Check Management Studio works by firing it up.

Click on NO when you see this dialog box:

Check 3: Can you run a basic query against the new SQL Server?
Check SQL Server works by running a simple query from Management Studio:

Enter the query shown below and hit F5 to run it:
Check 4: Is SQL Server Agent Running?
Check SQL Server Agent is running for scheduled jobs. There should be a green
arrow next to the SQL Server Agent database symbol (it’s small, you might have to
look hard):
Check 5: Can SQL Server be seen from the Network?
Check that the new SQL Server can be seen from another SQL Server on the same
domain by running isql –L (or osql –L):
If you can’t see the new SQL Server in this list, check that the SQL Server Browser
service is started on the machine where you have just installed SQL Server.

Check 6: Has the TCP/IP network protocol library been enabled on the
server?
If the browser service is started but you still cannot connect to the server, click on
Start ->Programs -> SQL Server 2008 -> SQL Server Configuration Manager
(on the server where SQL Server’s just been installed)
The SQL Server Configuration Manager window opens.
Click on the SQL Server Network Configuration node and expand it.
In the example below, we have MSSQLSERVER (a base instance of SQL Server), and
SQLEXPRESS showing as installed.
If in doubt, click on Protocols for MSSQLSERVER.
In the above screenshot, the TCP/IP network protocol library is disabled. We need to
enable it in order that remote servers can talk to the newly installed SQL Server.
• A word of explanation : In most installations, Named Pipes can be ignored,
unless there is a requirement for it. In virtually all environments, VIA can also
be ignored as this protocol requires a special network card. Shared memory is
the “local” protocol that SQL Server uses when talking to a client application
on the same server as itself, for example when SQL Server Management
Studio connects to it. It is usually best to leave this enabled.

You will need the TCP/IP protocol enabled if you need to connect to your new SQL
Server from a remote client or another server via TCP/IP, which is what most
networks use.
If it shows as DISABLED (above), double click on the TCP/IP protocol line, and
the following window will appear:
Ensure that Enabled is set to Yes, and click on OK.
The following warning will appear:

Click on OK, and you will be returned to the Configuration Manager window, where
TCP/IP will now be shown as enabled:
Go back to the Services applet, and re-start the MSSQLSERVER service so that the
TCP/IP protocol can be used to connect to your new SQL Server.
Then try to connect to it again from a remote machine.
If you have experienced problems with the previous connectivity tests, you should
now be able to repeat at least some of them successfully.
End of Article

How to-install-sql-server-2008

Recommended

More Related Content

What's hot (16)

Viewers also liked (6)

Similar to How to-install-sql-server-2008 (20)

Recently uploaded (20)

How to-install-sql-server-2008