Implementation in mule esb

IMPLEMENTATION IN MULE ESB
VAMSI KRISHNA

AGENDA
• Overview of ESB
• Introduction to Mule
• Mule and JBI
• Real-world Application
Application Overview
Systems Involved
Design Considerations
Event Flows
• Implementation with Mule
Components
Transports
Returning the Loan Quote
Fault Tolerance
Scaling
• Summary

INTRODUCTION TO ESB
What is it?
Enterprise Service Bus is an evolving architecture technique to
integrate incompatible business applications over a common
messaging bus.
Why do we need it?
Many of the applications we write are in fact integration projects. Only
the most simple applications do not need to interact with other
applications.
Where does SOA fit in?
ESB is one architecture style that abides by the rules of a Service
Orientated Architecture.
What is JBI?
Java Business Integration (JSR:208) is an emerging standard that
defines common interfaces for components and message exchanges for
application integration.
Does this all sound familiar?
There is nothing new about integration, we've been doing it for years.
So why the hype?

PROPERTIES OF AN ESB
• Loosely Coupled
• Event-Driven
• Highly Distributed
• Security/Authorization
• Abstract Endpoints
• Intelligent Routing
• Data Transformation (inbound/outbound)
• Reliable Messaging
• Multi-Protocol Message Bus
• Light Weight

INTRODUCTION TO MULE
• Service container and messaging platform
• Supports a variety of topologies including ESB
• Highly Scalable; uses SEDA event model
• Lightweight and embeddable
• Transactional; Local and Distributed
• Fault tolerance; Exception management
• Secure; authentication/authorization (Using
Spring/Acegi)
• Powerful event routing capabilities (based on EIP book)
• Support for over 20 messaging protocols/transports
• End-to-End Data Transformation
• Management and Monitoring using JMX
• BPEL Support
• Deployment: JAR, WAR, RAR, EAR.

MULE TOPOLOGIES
Enterprise Service Bus
Client/Server and Hub n' Spoke
Peer Network
Pipeline
Enterprise Service Network

MULE AND JBI
Is Mule a JBI container?
There is a separate project called Mule JBI that is a JBI implementation that
reuses the Mule service stack.
Does Mule work with JBI?
You can use Mule transports, components and transformers inside any JBI
container. Mule provides a couple of components that allows JBI
components to subscribe and publish events to and from Mule.
Do Mule and JBI compete?
JBI solves a subset of messaging problems. Mule addresses the basic need
to move any kind of data (not just XML) between services in an
organization
Which is best for me?
Mule of course!
The reason Mule integrates with other JBI engines and provides it own JBI
container is that one integration solution will never satisfy all integration
needs.
Mule levels the playing field allowing you to pick and choose which
technologies to integrate with.

MULE AND JBI DIFFERENCES
JBI
 Described in terms of Service Engines (SEs) which are akin to components
that execute business logic.
 Binding Components (BCs) implement protocols to provide connectivity to
SEs.
 JBI uses a Message Exchange to manage interactions between components.
 Targeted a specifically at integration. Normalized Message
Mule
 Components are POJOs, EJBs, Spring Beans, Remote objects.
 The component never needs to call Mule APIs making them totally portable.
 Flexible endpoint model where a component may have zero or more inbound
and outbound endpoints.
 Message routing is done via routers that are associated with the component.
 Mule is a ubiquitous messaging platform.
 A distributed container for wiring components.

LOAN BROKER
A Real World Example

SHOPPING FOR LOANS
Customer calls different banks to find the best deal.
Each bank asks customer for his or her social security
number, the amount of the loan and the desired term.
Each bank then investigates the customer's credit
background, usually by contacting a credit agency, before it
finally sends the customer a quote.
Once the customer has received quotes from all banks, he or
she can then select the best offer, i.e. the lowest rate. [1]

THE LOAN BROKER
This process can be automated to allow customers to
obtain the best quote on-line from a far broader range
of banks, in much less time than if he or she were to
obtain all the quotes one by one.
 Upon receiving customer request, Loan Broker:
 obtains the credit information for that customer from the credit agency
 requests quotes for the customer from banks listed with the Lender
Service
 sends aggregate compilation of quotes to the customer for selection. [2]

COMPONENTS
Loan Broker Service Receives LoanRequests (customer, SS
number, loan amount, duration) and is
responsible for aggregating LoanQuotes
into response for the request.
Credit Agency Service An external service provider that provides
crediting checking on customers to ensure
the loan amount requested is feesible.
Credit Agency Gateway Marshals a request between the message
bus and the Credit Agency Application.
Lender Service Based on the customer's credit scoring,
loan amount and duration, the lender
service will select banks from which to
request a LoanQuote.
Lender Gateway Marshals a request from the message bus
to the Lender Application.
Banking Gateway Dispatches LoanRequests to one or more
banks.

ORCHESTRATION
LoanBroker (Http/Rest)
 Receives Requests over Http from a client application, such as a web browser.
Credit Agency (EJB)
 Is an EJB application that is managed by the Loan Broker company. It exposes an EJB called
creditAgency with a method getCreditProfile.
Lender Application (VM)
 Is a local component, a Pojo that will determine which lenders should be used.
Banks (SOAP)
 For simplicity of this example all banks expose the same WS interface, though it's quite feasible
to configure Mule to invoke different interfaces for different banks.
Gateways (JMS)
 Gateways marshal the requests from the message bus to external applications and services.

DESIGN CONSIDERATIONS
Constraints
 Application needs to support request/response processing model.
 Will get a high volume of requests.
 Synchronous processing will not give us enough throughput.
Transports
 Using a JMS message bus
 Need to invoke services over JMS, Http/Rest, VM, and SOAP.
 Need to invoke services in external application containers (EJB).
 Expose components as Web services (Banks).
Message
 The message on the bus is referred to as a LoanQuoteRequest. In this
example this is a Java bean but in real scenarios an XML document
would be used.

REQUEST EVENT FLOW
1. Client application makes a request sending the LoanBroker a
CustomerQuoteRequest Message.
2. LoanBroker creates a LoanQuoteRequest Message.
3. Mule sends the message to the Credit Agency Gateway via JMS
4. The Gateway marshals the request and invokes the CreditAgency
EJB. The component used in the RelectionMessageBuilder which
automatically attaches the CreditProfile to the LoanQuoteRequest
message.
5. Mule sends the Message to the Lender Gateway via JMS
6. The Gateway uses the VM transport to invoke the Lender
Application.
7. Mule sends the Message to the Banking Gateway via JMS
8. The Banking Gateway in this example invokes the Banks using SOAP.
9. Each of the Banks attaches a quote to the request and sends it back
to the LoanBroker via the ReplyTo address provided by the Banking
Gateway.
10.The ResponseRouter on the Loan Broker Service receives the
responses on the ReplyTo address. It selects the lowest quote
received for the request and returns it to the client.

LOAN BROKER
Implementation with Mule

THE MESSAGE
Lets start by defining the LoanQuoteRequest Message. In this example
the
Message is a Java bean and is the common message format on the bus.
Normally this would be XML, but Mule allows us to pass any data format
around.
public class LoanQuoteRequest implements Serializable
{
/** The request contains Customer info and loan amount and duration*/
private CustomerQuoteRequest customerRequest;
/** credit profile for the customer */
private CreditProfile creditProfile;
/** A list of lenders for this request */
private Bank[] lenders;
/** A loan quote from a bank */
private LoanQuote loanQuote;
.......
}

CLIENT REQUEST
The whole chain of events is initiated with a client request.
This is done over Http using Mule's REST support. It is
described in the Endpoint address –
jetty:rest://localhost:8080/loanbroker
Here we're saying -
 Embed a Jetty Servlet Engine
 Use the Rest servlet for receiving requests
 Listen on localhost:8080
 Bind the Rest servlet to the context /loanbroker
The request from the client would look like –
http://localhost:8080/loanbroker/?name=Ross+Mason&ssn=1234&
loanAmount=10000&loanDuration=24

THE MESSAGE
The Loan Broker endpoint receives the request as a set of Http
parameters, but we need to transform this into a
CustomerQuoteRequest object before the Loan Broker component
receives it.
We do this by configuring a custom transformer on the endpoint.
public Object transform(Object src, UMOEventContext context)
throws TransformerException {
String name = context.getStringProperty("name");
int ssn = context.getIntProperty("ssn");
double amount = context.getDoubleProperty("loanAmount");
double duration = context.getDoubleProperty("loanDuration");
Customer customer = new Customer(name, ssn);
CustomerQuoteRequest request =
new CustomerQuoteRequest(customer, amount, duration);
return request;
}

LOAN BROKER SERVICE
The Loanbroker service actually doesn't need to do anything but trigger the
LoanQuoteRequest on the bus. Mule handles all routing transformation and
passing the quote back to the callee.
The transformer configured on the REST inbound endpoint for the LoanBroker
converts the REST parameters into a CustomerQuoteRequest object.
public class LoanBroker
{
public LoanQuoteRequest requestLoanQuote(
CustomerQuoteRequest request) throws Exception
{
LoanQuoteRequest bqr = new LoanQuoteRequest();
bqr.setCustomerRequest(request);
return bqr;
}
}

LOAN BROKER CONFIGURATION
All the detail is in the Loan Broker configuration.
<mule-descriptor name="LoanBroker"
implementation="org.mule.samples.loanbroker.esb.LoanBroker">
<inbound-router>
<endpoint address="jetty:rest://localhost:8080/loanbroker"/>
</inbound-router>
<outbound-router>
<router className="org.mule.routing.outbound.OutboundPassThroughRouter">
<endpoint address="jms://esb.credit.agency"/>
</router>
</outbound-router>
<response-router timeout="10000">
<endpoint address="jms://esb.loan.quotes"/>
<router className="
org.mule.samples.loanbroker.esb.routers.BankQuotesResponseAggregator"/>
</response-router>
</mule-descriptor>

CREDIT AGENCY GATEWAY
The Credit Agency code is even easier! We use a
standard Mule Component called a
ReflectionMessageBuilder which builds a message
based on a set of results from endpoint invocations.
It will use reflection to determine how to set the result of
the last endpoint invocation as a property on the
master message.
There are other MessageBuilder components such as the
ScriptMessageBuilder component which is a JSR-223
(Scripting) component that allows you to manipulate
the payload after each request using Groovy,
JavaScript, Rhino or any other supported scripting
language.

CREDIT AGENCY CONFIGURATION
<mule-descriptor name="CreditAgencyGateway"
implementation="org.mule.components.builder.ReflectionMessageBuilder">
<inbound-router>
<endpoint address="jms://credit.agency"/>
</inbound-router>
<outbound-router>
<router className="org.mule.routing.outbound.FilteringRouter">
<endpoint address="ejb://localhost:1099/local/CreditAgency?method=getCreditProfile“
transformers=“LoanQuoteRequestToCreditProfileArgs”
responseTransformers="CreditProfileXmlToCreditProfile“/>
<properties>
<list name="methodArgumentTypes">
<entry value="java.lang.String"/>
<entry value="java.lang.String"/>
</list>
</properties>
</endpoint>
<endpoint address="jms://esb.lender.service"/>
</router>
</outbound-router>
</mule-descriptor>

CREDIT AGENCY CONFIGURATION
We invoke the CreditAgency application using an EJB endpoint –
ejb://localhost:1099/local/CreditAgency?method=getCreditProfile
This endpoint tells Mule to –
 Look up an EJB object at localhost:1099
 Use the JNDI name local/CreditAgency
 Invoke the method getCreditProfile on the EJB object
Notice also the transformers and responseTransformers attibutes on
the endpoint. These tell Mule how to marshal for the Application.
 LoanQuoteRequestToCreditProfileArgs – Extracts the method arguments from the request as
an array used to invoke getCreditProfile.
 CreditProfileXmlToCreditProfile – Parses the response Xml and creates a CreditProfile object
that will be set on the LoanQuoteRequest.

LENDER GATEWAY
Lender Service
 The Lender Agency is a Mule component, that receives events
directly using the VM transport.
Leander Gateway
 The Lender Gateway marshals requests from the bus to the lender
service.

LENDER GATEWAY CONFIGURATION
Lender Service
<mule-descriptor name="LenderService" implementation="org.mule.samples.loanbroker.esb.LenderService">
<inbound-router>
<endpoint address="vm://lender.service"/>
</inbound-router>
</mule-descriptor>
Lender Gatway
<mule-descriptor name="LenderGateway”
implementation="org.mule.components.simple.BridgeComponent">
<inbound-router>
<endpoint address="jms://esb.lender.service"/>
</inbound-router>
<outbound-router>
<router className="org.mule.routing.outbound.ChainingRouter">
<endpoint address="vm://lender.service"/>
<endpoint address="jms://esb.banks"/>
</router>
</outbound-router>
</mule-descriptor>

BANKING GATEWAY
The Banking Gateway is responsible for distributing requests to a list of lenders.
The ReciptientList router configured on this gateway is responsible for extracting
the endpoints from the message and invoking them. The RecipientList is a
type of Itinerary-based router that extracts its itinerary as a static list from
the event.
<mule-descriptor name="BankingGateway"
implementation="org.mule.components.simple.BridgeComponent">
<inbound-router>
<endpoint address="jms://esb.banks"/>
</inbound-router>
<outbound-router>
<router className="org.mule.routing.outbound.StaticRecipientList">
<reply-to address="jms://esb.loan.quotes"/>
</router>
</outbound-router>
</mule-descriptor>

BANKS
The banks in this example are just simple beans
that return a fixed interest rate and are exposed
as SOAP services.
<mule-descriptor name="Bank1"
inboundEndpoint="axis:http://localhost:10001/services"
implementation="org.mule.samples.loanbroker.Bank">
</mule-descriptor>
• Note to expose a component as an Axis service all you
need to do is add an Axis endpoint!

CHOOSING THE BEST QUOTE
Once a back has a quote it passes it to Mule which will send
the Quote on the reply-to endpoint specified by the Banking
Gateway.
Looking back at the LoanBroker configuration, there is a
response-router configured as -
<response-router timeout="10000">
<endpoint address="jms://esb.loan.quotes"/>
<router className="org.mule.samples.loanbroker.esb.routers.
BankQuotesResponseAggregator"/>
</response-router>
• The BankQuoteResponseAggregator is responsible for picking the
lowest quote. But before that happens Mule needs to make sure all
responses are received for the request.
• This is done using message correlation managed by Mule.

EVENT CORRELATION
When a event is dispatched from the Banking Gateway a
correlationId and correlationGroupSize is attached to the
SOAP message. This is a function of the Recipient List
router. It attaches the following information -
 CorrelationId – and Id that associates all the dispatched events to the same
group
 CorrelationGroupSize – how many events are in the group.
 CorrelationSequence – the order in which the events were dispatched.
The Response Router reads these correlation headers when
events are received and correlates the events.
When the event group correlation is complete the response-
router invokes itself where developers can plug in custom
logic.

RESPONSE AGGREGATION
The BankQuoteResponseAggregator implements a single method
that works out the lowest quote before passing it back to
Mule to route the response back to the client.
protected UMOMessage aggregateEvents(EventGroup events) throws RoutingException {
. . . .
List list = events.getEvents();
for (Iterator iterator = list.iterator(); iterator.hasNext();) {
event = (UMOEvent) iterator.next();
quote = (LoanQuote)event.getTransformedMessage();
logger.info("Processing quote: " + quote);
if (lowestQuote == null) {
lowestQuote = quote;
} else if (quote.getInterestRate() < lowestQuote.getInterestRate()) {
lowestQuote = quote;
}
}
return new MuleMessage(lowestQuote, event.getProperties());
}

TRANSPORTS
Most Mule transports can be configured using just the endpoint
address. i.e. tcp://localhost:45454 contains all the information
necessary to make a TCP connection.
However for JMS and EJB we need to define configuration properties for
each such as Jndi information.
This is done by configuring connectors in our MuleXml.

TRANSPORT CONFIGURATION
EJB Connector (OpenEJB – Local Server. See http://openejb.org)
<connector name="ejbConnector" className="org.mule.providers.ejb.EjbConnector">
<properties>
<property name="jndiInitialFactory"
value="org.openejb.client.LocalInitialContextFactory"/>
<property name="securityPolicy" value="security.policy"/>
<map name="jndiProviderProperties">
<property name="openejb.base" value="."/>
<property name="openejb.configuration" value="../conf/openejb.conf"/>
</map>
</properties>
</connector>
JMS Connector (ActiveMQ)
<connector name="jmsConnector" className="org.mule.providers.jms.JmsConnector">
<properties>
<property name="connectionFactoryJndiName" value="ConnectionFactory"/>
<property name="jndiInitialFactory"
value="org.activemq.jndi.ActiveMQInitialContextFactory"/>
<property name="specification" value="1.1"/>
</properties>
</connector>

FAULT TOLERANCE
Exception Strategies
 Can be defined on components and connectors
 Can be defined globally of for each connector or component
 Can handle different exception types differently.
 Exception hierarchy provides all available information
 Event payloads can be re-routed on exception
Connection Strategies
 Control how connectors connect to underlying resources
 Allow for flexible retry policies
 Notifications of failed connections
 Consistent endpoint state maintained
 Can alter routing paths based on failed connections

SCALING
SEDA Model
 Mule is SEDA-based, which is an architecture designed for high concurrency and
throughput.
JMS Clustering
 Currently Mule can use JMS clustering to distribute events to a cluster of Mule
Nodes.
Application Server Clustering
 Mule can be embedded inside a JCA container and allow the App server to
manage its resources and cluster instances.
New Clustering Support
 The next release of Mule will provide clustering and distribution using
JGroups/JBossCache.
Load Balancing using Mule
 You can use a Mule instance to provide load-balancing over any transport.

SUMMARY
An ESB integrating a client application and 3 back office systems.
Combined a number of transports including HTTP, JMS, EJB and Web
Services.
Easy to add in Exception handling, transactions, etc. All done through
configuration.
All event routing, management, transformation is handled by Mule.
Very little code to write. Just domain-specific logic.
A fully functional ESB in about an hour!

Implementation in mule esb

Recommended

More Related Content

What's hot (20)

Viewers also liked (20)

Similar to Implementation in mule esb (20)

More from Vamsi Krishna (8)

Recently uploaded (20)

Implementation in mule esb