Install Salsa Windows 2012 Three Servers
Download as PPTX, PDF1 like118 views
This presentation describes the installation procedure for SALSA controller and reporting system overs a windows 2012 platform
![[old] Network Performance Monitoring for DevOps and IT](https://cdn.slidesharecdn.com/ss_thumbnails/site24x7-networkmonitoringwebinar7cdec16th-151229132512-thumbnail.jpg?width=560&fit=bounds)
Ad
More Related Content
What's hot (19)
Similar to Install Salsa Windows 2012 Three Servers (20)
Ad
Recently uploaded (20)
Ad
Install Salsa Windows 2012 Three Servers
- 1. Installing SALSA and Reporting in 3 Windows 2012 Servers Oscar O. Irigoyen Ph.D Senior Solutions Consultant
- 2. Introduction
- 3. General Considerations • This lab assumes that you have basic knowledge of the Ipanema Architecture and operation, including appliances and the SALSA management platform • This lab uses 3 Servers with Windows 2012 • Sizing of the servers depend on each deployment • This lab uses minimal compute resources to only demonstrate the installation • Consult the sizing guide from Infovista Support • The list of prerequisites are needed to be observed for proper operation of the different modules • The names of the packages of the software list can change depending on the versions and updates • The installation order of the packages used in this lab is not mandatory, but it is recommended to follow as a progressive procedure to include testing
- 4. Servers Prerequisites • Install and patch the Windows 2012 servers where the SALSA and Infovista reporting modules will be installed. Make sure you have Admin credentials for the SALSA modules installation. • No Firewall services • No Antivirus services • Verify distinct System Names, MAC addresses, IP addresses
- 5. ISU (Ipanema Software Unit) License • Get the ISUs license from an Infovista representative • The file looks something like: • Ipanema_127062018.ipmsys 5
- 6. Infovista Server for Reporting license • It is not mandatory for the test, the server has an evaluation license for 30 days • You can ask for a long-term license to the Infovista representatives • You need to copy the System ID for requesting the Infovista Server license 6
- 7. Packages 7
- 8. Download the list of software from Infovista Support https://support-ipanema.infovista.com • ipboss_v9.3.0 -windows • ipreporter_9.3.0 • ipreporter_web 9.3.0 • VistaCockpit 5 1 windows2 • Hotfix VistaCockpit 51074-VC-9431 (install from VistaCockpit Console) • IVserver 5.1 build 51151– windows • Hotfix IVserver5.1-51151-IVS-20410 (install from VistaCockpit Console) • VistaPortalSE 5.1 build 51029- windows • Hotfix VistaPortalse 5.1 VPS 4503 (install from VistaCockpit Console)
- 9. Order of Installation -SALSA and Reporting Server1 3. ipboss_v9.3.1 windows 4. ipboss cockpit agent (included in ipboss pack) 5. ipreporter_9.3.0 Server2 • 6. IVserver 5.1 build 51151– windows • 8. ipreporter_9.3.0 Server3 1. VistaCockpit 5 1 windows2 2. Hotfix VistaCockpit 51074-VC-9431 (install from VistaCockpit Console) 7. Hotfix IVserver5.1-51151-IVS-20410 (install from VistaCockpit Console) 9. VistaPortalSE 5.1 build 51029- windows 10. Hotfix VistaPortalse 5.1 VPS 4503 (install from VistaCockpit Console) 11. ipreporter_web 9.3.0
- 10. Installation 10
- 11. 1- Server3 -VistaCockpit 5 1 windows2 • Make sure the Server IP address works properly and ping the other servers • Most of the time you can use the default parameter configuration • You can customize the proposed ports but normally they have not conflict with other ports inside the server. When you use a separated server for Vista Cockpit you should verify those ports in the network. • The reason to install Cockpit as the second package is because it is the monitoring application for all other server components
- 12. 2- Server3 -Hotfix VistaCockpit 51074-VC-9431 • Open the Cockpit Console and install the hotfix • You do not need password • Go to the “Hotfix Installation” bottom (top right) • The console will reboot twice it is normal after the installation of the Hotfix 12
- 13. 3- Server1 -ipboss_v9.3.0 - windows • Make sure the Server IP address works properly and ping the other servers • Change or not the Admin Password • Use defaults or change ports depending on what your network is using • You can let the default passwords of the databases wget -T 2 -t 1 54.193.81.253:20443
- 14. 4- Server1 –ipboss cockpit agent • Go to the setup program inside of the ipboss_v9.3.0 – windows installation package • ~ipboss_v9.3.0 – windowswindowscockpitagentwin32 • After the installation go to the Cockpit console and verify that the Server 1 and its SALSA components have apeared 14
- 15. 5- Server1 -ipreporter_9.3.0 • Install the ipreporter_9.3.0 software using the default parameters. • By default the software will propose the piece for the SALSA server so just select next 15
- 16. 6- Server 2 -IVserver 5.1 build 51151– windows • Install IVserver 5.1 • Agree for the license evaluation. • You can ask for a long-term license to the Infovista representatives • You need to copy the System ID for requesting the Infovista Server license • Select defaults and complete the installation 16
- 17. 7- Server3 -Hotfix IVserver5.1-51151-IVS-20410 • Login into Vista Cockpit and deploy the hotfix (by using the hotfix installation button top right • The IVserver service in the Server2 will be rebooted after the hotfix is deployed 17
- 18. 8- Server2: 6-ipreporter_9.3.0 • Install the ipreporter_9.3.0 software using the default parameters • By default, the software will propose the piece for the IVserver so just select next • Import Infovista libraries • Logging: administrator (default) • Password: blank • Hit on the button “Import” 18
- 19. 9- Server3 -VistaPortal 5.1 build 51029 - windows • After unzipping the software, you will find another zipped folder • “VistaPortal_Standard_Edition-5.1-windows” • Extract the files • Look for the setup and install • Use defaults and complete the installation • Test VistaPortalSE using the browser • For example https://192.168.1.163:10080/PortalSE 19
- 20. 10- Server3 - Hotfix VistaPortalse 5.1 VPS 4503 • Open the Vista Cockpit application • Verify that VistaPortalSE is present in the hosts component • Deploy the Hotfix (by using the hotfix installation button top right 20
- 21. 11- Server3 -ipreporter_web 9.3.0 • Use all the defaults and install the ipreporter_web 21
- 22. Install the SALSA license • Login into the SALSA platform by using your browser • Select “Above” link on the left below • Import the license 22
- 24. Configuring a domain • Configure a Domain server using the IP address of the domain • Configure the Domain • Select a name • Define the number of ISUs allocated • Select the SNMP port (e.g. 1) • Select the runtime server • Complete the runtime server parameters • Select the long-term reporting time • Apply the parameters 24
- 25. Login into the domain • Activate Visibility • Verify the Reporting Server and Database lights turn to green • When the Reporting Server and Database are running • Go to the Reporting section • Verify you have the Reports including Domain, Sites and Applications 25
Editor's Notes
- #2: Hi, I’m <first name> < last name >, <Title> at InfoVista. It’s a pleasure for me to be here with you to introduce InfoVista, and discuss how we can help communication service providers, IT-intensive enterprises and governmental organizations achieve the promise of better network performance.