Introduction to Data Structures Sorting and searching

Data Structures
UNIT –I
INTRODUCTION TO DATA STRUCTURES,
SEARCHING AND SORTING

Contents
• Introduction to Data Structures
• Classification and Operations on Data Structures
• Preliminaries of Algorithm
• Algorithm Analysis and Complexity
• Recursive Algorithms
• Searching Techniques - Linear, Binary search
• Sorting Techniques- Bubble, Selection, Insertion

Data Structure
Data Structure is a way of storing data in a computer so that it can
be used efficiently and it will allow the most efficient algorithm to
be used.
A data structure is representation of the logical relation ship
existing between individual elements of data.
A data structure should be seen as a logical concept that must
address two fundamental concerns.
1. First, how the data will be stored and
2. Second, what operations will be performed on it.

Overview of Data Structures
The structure of input and output data can be used to derive the
structure of a program. Data structure affects the design of both
structural and functional aspects of a program.
Algorithm + Data structure=Program.
Classification of data structure
Data structures are normally divided into two categories:
• Primitive data structures
• Non-primitive data structures

Classification of data structure

Primitive data structure
The primitive data structures are known as basic data structures.
These data structures are directly operated upon by the machine
instructions. Normally, primitive data structures have different
representation on different computers.
Example of primitive data structure :
• integer
• float
• character
• pointer

Non-Primitive data structure
The non-primitive data structures are highly developed complex
data structures. Basically, these are developed from the primitive
data structure. The non-primitive data structure is responsible for
organizing the group of homogeneous and heterogeneous data
elements.
Example of Non-primitive data structure :
• Arrays
• Lists
• Trees
• Graphs

Linear and Non-linear Data Structures
• Linear Data Structures: Linear data structures can be
constructed as a continuous arrangement of data elements in the
memory. It can be constructed by using array data type. In the
linear data structure the relationship of adjacency is maintained
between the data elements.
• Non-linear data structures: Non-linear data structure can be
constructed as a collection of randomly distributed set of data
item joined together by using a special pointer (tag). In non-
linear data structure the relationship of adjacency is not
maintained between the data items.

Operations on Data Structures
• Add an element
• Delete an element
• Traverse
• Sort the elements
• Search for a data element
• Update an element
• Merging

Algorithm
Definition:
An algorithm is a series of step-by-step instructions that aim to
solve a particular problem.
• The word algorithm originates from the Arabic word Algorism
which is linked to the name of the Arabic Mathematician “Abu
Abdullah Muhammad ibn Musa Al-Khawarizmi”
• Khawarizmi is considered to the first algorithm designer for
adding numbers.

Structure of an Algorithm
• An algorithm has the following structure:
- Input Step
- Assignment Step
- Decision Step
- Repetitive Step
- Output Step

Properties of an Algorithm
• Finiteness: The algorithm must always terminate after a finite number of
steps.
• Definiteness: Each step must be precisely defined; the actions to be carried
out must be rigorously and unambiguously specified for each case.
• Input: An algorithm has zero or more inputs, taken from a specified set of
objects.
• Output: An algorithm has one or more outputs, which have a specified
relation to the inputs.
• Effectiveness: It must be possible to perform each step of the algorithm
correctly and in a finite amount of time. That is, its steps must be basic
enough so that, for example, someone using a pencil and a paper could carry
out exactly , and in a finite amount of time.

Algorithm Analysis and Complexity
• The performance of algorithms can be measured on the scales
of Time and Space
• The Time Complexity of an algorithm or a program is a
function of the running time of the algorithm or a program.
• The Space Complexity of an algorithm or a program is a
function of the space needed by the algorithm or program to run
to completion.

14
Performance Analysis
The performance of the program based on efficient usage or
primary and secondary memory as well as the execution time of
the program. The performance evaluation of a program is done
using:
• Performance analysis ( machine independent)
• Performance measurement (machine dependent)
Definition : The process of estimating time and space consumed
by the program that is independent of the machine is called
performance analysis. So the efficiency of the program depends
on two factors:
• Space complexity
• Time complexity

Space complexity/efficiency
Space complexity is the total amount of memory space used by an
algorithm/program including the space of input values for
execution.
• So to find space complexity, it is enough to calculate the space
occupied by the variables used in an algorithm/program.
• Auxiliary space is just a temporary or extra space and it is not the
same as space-complexity.
• The space requirement S of a program P denoted by S(P) is given by:
S(P) = c + Sp(I)
– c is fixed space requirement
– I variable space requirement

Space Complexity
In simpler terms,
Space Complexity = Auxiliary space + Space use by input
values
Important Note: The best algorithm/program should have the
lease space-complexity. The lesser the space used, the faster it
executes.

How to calculate Space Complexity of an Algorithm?
Let us understand the Space-Complexity calculation through
examples.
Example - 1:
#include<stdio.h>
int main()
{
int a = 5, b = 5, c;
c = a + b;
printf("%d", c);
}

In the above program, 3 integer variables are used. The size of the integer
data type is 2 or 4 bytes which depends on the compiler. Now, lets assume
the size as 4 bytes. So, the total space occupied by the above-given
program is 4 * 3 = 12 bytes. Since no additional variables are used, no
extra space is required.
Hence, space complexity for the above-given program is O(1), or
constant.

Example -2:
#include <stdio.h>
int main()
{
int n, i, sum = 0;
scanf("%d", &n);
int arr[n];
for(i = 0; i < n; i++)
{
scanf("%d", &arr[i]);
sum = sum + arr[i];
}
printf("%d", sum);
}

In the above-given code, the array consists of n integer elements. So, the
space occupied by the array is 4 * n. Also we have integer variables such as
n, i and sum. Assuming 4 bytes for each variable, the total space occupied
by the program is 4n + 12 bytes.
Since the highest order of n in the equation 4n + 12 is n, so the space
complexity is O(n) or linear.

Summary
Big O Notation Space Complexity details
O(1)
Constant Space Complexity occurs when the
program doesn’t contain any loops, recursive
functions or call to any other functions.
O(n)
Linear space complexity occurs when the program
contains any loops.

Time complexity
• The time complexity of an algorithm is the amount of
computer time required to run the program till the completion.
• Normally, the time complexity is calculated using step count.
i.e., how many times a program step is executed.

23
Total Frequency Count of Program
• Program Statements
..…………………
x = x+ 2
….……………….
Total Frequency Count
• Frequency Count
1
1
Time Complexity of Program SegmentAis O(1).
Segment A

24
Total Frequency Count of Program Segment B
..…………………
for i = 1 to n do
x = x+ 2;
end
….……………….
• Frequency Count
(n+1)
n
n
……………………
3n+1
Time Complexity of Program Segment B is O(n).

25
Total Frequency Count of Program Segment C
..…………………
for i= 1 to n do
for j = 1 to n do
x = x+ 2;
end
end
….……………….
• FrequencyCount
(n+1)
(n+1)n
N2
N2
N
……….……
…
3n2 +3n+1
TimeComplexity of ProgramSegmentisO(n2).

26
Asymptotic Notations
• Big oh(O): f(n) = O(g(n)) ( read as f of n is big oh of g of n), if
there exists a positive integer n0 and a positive number c such
that |f(n)| ≤ c|g(n)| for all n ≥ n0.
• Here g(n) is the upper bound of the function f(n).
f(n) g(n)
16n3+45n2 +12n n3 f(n) =O(n3 )
34n –40 n f(n) =O(n)
50 1 f(n) =O(1)

27
• Omega(Ω): f(n) = Ω(g(n)) ( read as f of n is omega of g of n),
if there exists a positive integer n0 and a positive number c such
that
|f(n)| ≥ c |g(n)| for all n ≥ n0.
• Here g(n) is the lower bound of the function f(n).
f(n) g(n)
16n3+8n2 +2 n3 f(n) =Ω(n3 )
24n +9 n f(n) =Ω(n)

• Theta(Θ): f(n) = Θ(g(n)) (read as f of n is theta of g of n), if
there exists a positive integer n0 and two positive constants c1
and c2 such that c1 |g(n)| ≤ |f(n)| ≤ c2 |g(n)| for all n ≥ n0.
• The function g(n) is both an upper bound and a lower bound
for the function f(n) for all values of n, n≥ n0
20
f(n) g(n)
16n3 + 30n2 – 90 n2 f(n) = Θ(n2 )

29
Time Complexity
Complexity Notation Description
Constant O(1) Constant number of operations, not depending on the input data size.
Logarithmic O(logn) Number of operations proportional of log(n) where n is the size of
the input data.
Linear O(n) Number of operations proportional to the input data size.
Quadratic O(n2 ) Number of operations proportional to the square of the size of the
input data.
Cubic O(n3 ) Number of operations proportional to the cube of the
size of the input data.
Exponential O(2n) Exponential number of operations, fast growing.
O(kn )
O(n!)

Time Complexities of various Algorithms
30

Recursion
Definition:
The process of recursion involves solving a problem by turning it
into smaller varieties of itself.
Types of Recursions
• Direct Recursion
- a function calls itself from within itself.
• Indirect Recursion
- two functions call one another mutually.

Differences Between Recursion and Iteration
• A function is said to be recursive if it calls itself again and again within its
body whereas iterative functions are loop based imperative functions.
• Recursion uses stack whereas iteration does not use stack.
• Recursion uses more memory than iteration as its concept is based on stacks.
• Recursion is comparatively slower than iteration due to overhead condition
of maintaining stacks.
• Recursion makes code smaller and iteration makes code longer.
• Iteration terminates when the loop-continuation condition fails whereas
recursion terminates when a base case is recognized.
• Infinite recursion can crash the system whereas infinite looping uses CPU
cycles repeatedly.
• Recursion uses selection structure whereas iteration uses repetition structure.

Types of Recursion
Recursion may be further categorized as:
• Linear Recursion
• Binary Recursion
• Multiple Recursion

Linear Recursion
It is the most common type of Recursion in which
function calls itself repeatedly until base condition
[termination case] is reached. Once the base case is
reached the results are return to the caller function. If a
recursive function is called only once then it is called a
linear recursion.

Binary Recursion
Some recursive functions don't just have one call to themselves; they have two
(or more). Functions with two recursive calls are referred to as binary recursive
functions.
Example1: The Fibonacci function fib provides a classic example of binary
recursion. The Fibonacci numbers can be defined by the rule:
fib(n) = 0 if n is 0,
= 1 if n is 1,
= fib(n-1) + fib(n-2) otherwise

Binary Recursion
For example, the first seven Fibonacci numbers are
Fib(0) = 0
Fib(1) = 1
Fib(2) = Fib(1) + Fib(0) = 1
Fib(3) = Fib(2) + Fib(1) = 2
Fib(4) = Fib(3) + Fib(2) = 3
Fib(5) = Fib(4) + Fib(3) = 5
Fib(6) = Fib(5) + Fib(4) = 8

Tail Recursion
A recursive function is tail recursive when recursive call is the last
thing executed by the function.
• As such, tail recursive functions can often be easily implemented
in an iterative manner; by taking out the recursive call and
replacing it with a loop, the same effect can generally be
achieved.
• In fact, a good compiler can recognize tail recursion and convert
it to iteration in order to optimize the performance of the code.

Tail Recursion
Example:
void print(int n)
{
if (n < 0) return;
cout << " " << n;
// The last executed statement is recursive call
print(n-1);
}

Tail Recursion
Factorial of a given number using tail recursion.
long fact(long n, long a)
{
if(n == 0)
return a;
return fact(n-1, a*n);
}

Searching
• Search: A search algorithm is a method of locating a
specific item of information in a larger collection of data.
• The following are the different ways to search the
contents of an array:
1. Linear or Sequential Search
2. Binary Search

Linear Search
• In this technique, key is compared with each item in a given
array sequentially one after the other.
• If the key is found, the corresponding record may be retrieved or
the position of the key may be returned.
• If the key is not fond the function return 0 or -1. this technique is
usually used to search in an unordered list.
• Also called sequential or serial search.

Algorithm
1.Read array A of n elements and key
2 flag=0
3.for i in range(n)
if A[i]==key
flag=1
return flag
if flag=1
print search is successful
else
print search is unsuccessful

Complexity of Linear Search
For linear search, we need to count the number of comparisons
performed, but each comparison may or may not search the
desired item.
Case Best Case Worst Case Average Case
If item is present 1 n n / 2
If item is not present n n n

Binary Search
• Binary search is an extremely efficient algorithm. This search
technique searches the given item in minimum possible
comparisons. To do the binary search first we had to sort the array
elements.
Logic
• First find the middle element of the array i.e.,
mid=(low + high)/2 here low=0 mid=n-1
• compare the mid element with key element.

Binary Search
There are three cases:
(a) if A[mid] is a desired key element then the search is
successful.
(b) if A[mid] is less than key element then search only the first
half of the array. i.e., high = mid-1
(c) if A[mid] is greater than the key element search in the second
half of the array. i.e., low= mid+1

Binary Search
• Repeat the same steps until an element is found. In this
algorithm every time we are reducing the search area.
• So the number of comparisons keep on decreasing.
• In worst case the number of comparisons is atmost log(n).
• So it is an efficient algorithm when compared linear search
but the array has to be sorted before doing binary search

Algorithm
Here A is an array of n elements.
Step 1: low=0, high=n-1, mid=(low + high)/2
Step 2:repeat step 3 and step 4 while low <= high and A[mid] != key
Step 3: if item< A[mid], then
set high = mid-1
else
set low=mid +1
Step 4: set mid=(low + high)/2
Step 5: if A[mid]= key then
set loc=mid
else
set loc=NULL
Step 6: exit

Complexity of Binary Search
In Binary Search, each comparison eliminates about half of the
items from the list. Consider a list with n items, then about n/2
items will be eliminated after first comparison. After second
comparison, n/4 items of the list will be eliminated.
• If this process is repeated for several times, then there will be
just one item left in the list.
• The number of comparisons required to reach to this point is n/2i
= 1. If we solve for i, then it gives us i = log n.
• The maximum number is comparison is logarithmic in nature,
hence the time complexity of binary search is O(log n).

Complexity of Binary Search
Case Best Case Worst Case Average Case
If item is present 1 O(log n) O(log n)
If item is not present O(log n) O(log n) O(log n)

Sorting Techniques
Sorting in general refers to various methods of arranging or
ordering things based on criteria's (numerical, chronological,
alphabetical etc.).
There are many approaches to sorting data and each has its own
merits and demerits.
• Bubble Sort
• Selection Sort
• Insertion Sort
• Quick Sort
• Merge Sort

Bubble Sort
This sorting technique is also known as exchange sort, which
arranges values by iterating over the list several times and in each
iteration the larger value gets bubble up to the end of the list.
• This algorithm uses multiple passes and in each pass the first and
second data items are compared.
• if the first data item is bigger than the second, then the two items
are swapped.
• Next the items in second and third position are compared and if the
first one is larger than the second, then they are swapped,
otherwise no change in their order.
• This process continues for each successive pair of data items until
all items are sorted.

Algorithm
Step 1: Repeat Steps 2 and 3 for i=1 to n -1
Step 2: Set j=1
Step 3: Repeat while j<=n-i-1
(A) if a[i] < a[j]
Then interchange a[i] and a[j]
[End of if]
(B) Set j = j+1
[End of Inner Loop]
[End of Step 1 Outer Loop]
Step 4: Exit

Program
def bubbleSort(arr):
n = len(arr)
# Traverse through all array elements for i in range(n):
for i in range(n-1):
# Last i elements are already in place for j in range(0, n-i-1):
for j in range(0,n-i-1):
# traverse the array from 0 to n-i-1
# Swap if the element found is greater
# than the next element if arr[j] > arr[j+1] :
if arr[j] > arr[j+1]:
arr[j], arr[j+1] = arr[j+1], arr[j]
#print(arr)
# Driver code to test above
arr = [64, 34, 25, 12, 22, 11, 90]
print("Unsorted array is:")
for i in range(len(arr)):
print ("%d" %arr[i], end=' ')
bubbleSort(arr)
print ("nSorted array is:")

Time Complexity of Bubble Sort
The efficiency of Bubble sort algorithm is independent of number
of data items in the array and its initial arrangement. If an array
containing n data items, then the outer loop executes n-1 times as
the algorithm requires n-1 passes. In the first pass, the inner loop is
executed n-1 times; in the second pass, n-2 times; in the third pass,
n-3 times and so on. The total number of iterations resulting in a
run time of O(n2).
Worst Case Performance O(n2)
Best Case Performance O(n)
Average Case Performance O(n2)

Selection Sort
The selection sort algorithm sorts an array by repeatedly finding the
minimum element (considering ascending order) from unsorted part
and putting it at the beginning. The algorithm maintains two
subarrays in a given array.
1)The subarray which is already sorted.
2) Remaining subarray which is unsorted.
In every iteration of selection sort, the minimum element
(considering ascending order) from the unsorted subarray is picked
and moved to the sorted subarray.

Program
A = [64, 25, 12, 22, 11]
# Traverse through all array elements
for i in range(len(A)):
# Find the minimum element in remaining unsorted array
min_idx = i
for j in range(i+1, len(A)):
if A[min_idx] > A[j]:
min_idx = j
# Swap the found minimum element with
# the first element
A[i], A[min_idx] = A[min_idx], A[i]
print ("Sorted array")
for i in range(len(A)):
print("%d" %A[i])

Time Complexity of Selection Sort
Selecting the lowest element requires scanning all n elements (this
takes n − 1 comparisons) and then swapping it into the first position.
Finding the next lowest element requires scanning the remaining n −
1 elements and so on, for (n − 1) + (n − 2) + ... + 2 + 1 = n(n − 1) / 2
∈ O(n2) comparisons. Each of these scans requires one swap for n −
1 elements (the final element is already in place).
Best Case Performance O(n2)

Insertion Sort
• Insertion sort is a simple sorting algorithm that works similar to
the way you sort playing cards in your hands.
• The array is virtually split into a sorted and an unsorted part.
• Values from the unsorted part are picked and placed at the correct
position in the sorted part.
• Simple implementation
• Efficient for (quite) small data sets
• More efficient in practice than most other simple quadratic
(i.e., O(n2)) algorithms such as selection sort or bubble sort; the
best case (nearly sorted input) is O(n)

Algorithm
To sort an array of size n in ascending order:
Step 1: Iterate from arr[1] to arr[n] over the array.
Step 2: Compare the current element (key) to its predecessor.
Step 3: If the key element is smaller than its predecessor, compare
it to the elements before. Move the greater elements one position
up to make space for the swapped element.

Program
def insertionSort(arr):
# Traverse through 1 to len(arr)
for i in range(1, len(arr)):
key = arr[i]
# Move elements of arr[0..i-1], that are
# greater than key, to one position ahead
# of their current position
j = i-1
while j >= 0 and key < arr[j] :
arr[j + 1] = arr[j]
j -= 1
arr[j + 1] = key
arr = [12, 11, 13, 5, 6]
insertionSort(arr)
print ("% d" % arr[i])

Time Complexity of Insertion Sort
If there are n elements to be sorted. Then, this procedure is
repeated n-1 times to get sorted list of array.
Best Case Performance(nearly) O(n)

Quick Sort
Quick sort is a divide and conquer algorithm. Quick sort first divides a large
list into two smaller sub- lists: the low elements and the high elements. Quick
sort can then recursively sort the sub-lists.
The steps are:
1. Pick an element, called a pivot, from the list.
2. Reorder the list so that all elements with values less than the pivot come
before the pivot, while all elements with values greater than the pivot come
after it (equal values can go either way). After this partitioning, the pivot is
in its final position. This is called the partition operation.
3. Recursively apply the above steps to the sub-list of elements with smaller
values and separately the sub-list of elements with greater values.
The base case of the recursion is lists of size zero or one, which never need to
be sorted.

Algorithm to find Pivot Element
Step – 1: Consider first element as a pivot a[low]
Step – 2: Initialize i to low index, and j to high index
Step – 3: Repeat the following steps until i<j
a) Keep on incrementing ‘i’ value while a[i]<=pivot
b) Keep on decrementing ‘j’ value while a[j]>pivot
c) if i<j then swap(a[i],a[j])
Step – 4: if i>j then swap(a[j],pivot), j is the position of pivot

Introduction to Data Structures Sorting and searching

Program
def partition(Array,low,up):
i = low+1
j = up
pivot = Array[low]
while(i<=j):
while(Array[i]<pivot and i<up):
i = i+1
while(Array[j]>pivot):
j = j-1
if(i<j):
Array[i],Array[j] = Array[j],Array[i]
i = i+1
j = j-1
else:
i = i+1
Array[low] = Array[j]
Array[j] = pivot
return j

Program
def quick(Array,low,up):
if(low>=up):
return
piv_loc = partition(Array,low,up)
#print(Array[low:piv_loc])
quick(Array,low,piv_loc-1)
#print(Array[piv_loc+1:up+1])
quick(Array,piv_loc+1,up)
Array = [48,44,19,59,72,80,42,65,82,8,95,68]
#Array=[30,20,10,50,60,40]
low = 0
up = len(Array) - 1
print("Unsorted elements:")
for i in Array:
print(i,end=' ')
quick(Array,low,up)
print("nSorted elements:")
for i in Array:
print(i,end=' ')

Time Complexity of Quick Sort
on average, makes O(n log n) comparisons to sort n items. In the
worst case, it makes O(n2) comparisons, though this behavior is
rare. Quick sort is often faster in practice than other O(n log n)
algorithms.
Best Case Performance(nearly) O(n log2 n)
Average Case Performance O(n log2 n)

Merge Sort
Merge sort is based on Divide and conquer method. It takes the list to be
sorted and divide it in half to create two unsorted lists. The two unsorted lists
are then sorted and merged to get a sorted list. The two unsorted lists are
sorted by continually calling the merge-sort algorithm; we eventually get a list
of size 1 (One) which is already sorted. The two lists of size 1 (One) are then
merged.
Merge Sort Procedure:
1. Divide the input which we have to sort into two parts in the middle. Call it
the left part and right part.
2. Sort each of them separately. Note that here sort does not mean to sort it
using some other method. We use the same function recursively.
3. Then merge the two sorted parts.

Merge Sort Algorithm
MergeSort() function:
 It takes the array, left-most and right-most index of the array to be sorted
as arguments.
 Middle index (mid) of the array is calculated as (left + right)/2.
 Check if (left<right) cause we have to sort only when left<right because
when left=right it is anyhow sorted.
 Sort the left part by calling MergeSort() function again over the left part
MergeSort(array,left,mid) and the right part by recursive call of
MergeSort function as MergeSort(array, mid + 1, right). Lastly merge
the two arrays using the Merge function.

Merge() function:
 It takes the array, left-most , middle and right-most index of the array to
be merged as arguments.
 Finally copy back the sorted array to the original array.

MergeSort(arr[], l, r)
If l < r:
1.Find the middle point to divide the array into two halves:
middle m = l+ (r-l)/2
2.Call mergeSort for first half: Call mergeSort(arr, l, m)
3.Call mergeSort for second half: Call mergeSort(arr, m+1, r)
4.Merge the two halves sorted in step 2 and 3:
Call merge(arr, l, m, r)

Time Complexity of Merge Sort
Worst Case Performance O(n log2 n)
Best Case Performance(nearly) O(n log2 n)
Average Case Performance O(n log2 n)

Time Complexity Comparison of Sorting Algorithms

Introduction to Data Structures Sorting and searching

Recommended

More Related Content

What's hot (20)

Similar to Introduction to Data Structures Sorting and searching (20)

Recently uploaded (20)

Introduction to Data Structures Sorting and searching