Introduction to rf and microwave circuits
Download as PPTX, PDF12 likes4,116 views
This document outlines the course structure, grading system, and reference materials for a course on RF and microwave engineering. It discusses the definition and applications of microwave signals, their advantages and disadvantages, and compares their behavior to conventional low frequency circuits. Additionally, it covers various microwave sources, their functional principles, and practical applications in communication, navigation, radar, and medical fields.
Introduction to rf and microwave circuits
- 1. Chapter 1: Introduction Shankar Gangaju Kathmandu Engineering College, Kalimati, Kathmandu [email protected] 1
- 2. Course Structure • Theory: 80 – Chapter 1: Introduction 8 marks – Chapter 2: RF and M/W Transmission Lines 10 marks – Chapter 3: RF and M/W Network Theory and Analysis 8 marks – Chapter 4: RF/MW Components and Devices 10 marks – Chapter 5: Microwave Generator 8 marks – Chapter 6: RF Design Practice 20 marks – Chapter 7: Microwave Antennas and Propagation 8 marks – Chapter 8: RF/MW Measurements 8 marks • Practical: 25 Lab_RF_Microwave 2
- 3. Grading System • Alternate Day Test+ Final Assessment: 50% • Attendance: 20% • Assignment:10% • Technical Writing: 10% • Presentation:10% 3
- 4. Reference Books 1. Microwave Electronics- K.C Gupta, Tata McGraw Hill 2. Microwave Engineering- A.K. Gautam, S.K.Kataria & Sons 3. Microwave Techniques-D.C. Agrawal, Tata Mc Graw-hill 4. Microwave Devices and Circuits-Samuel Y. Liao, PHI 3rd Edition,1994 5. Microwave Engineering-David M. Pozar, 2nd Edition, Newington CT: 1997 6. Engineering Electromagnetic-W.H. Hyatt, McGraw-Hill Book Company 7. Electronic Transmission Technology: Lines, Waves and Antennas-William Sinnema, Prentice Hall 4
- 6. Discipline Required in RF Design 6
- 7. RF and Microwave Design Hexagon 7
- 8. RF/Microwave • RF is a rate of oscillation in the range around 3KHz to 300GHz, which corresponds to the frequency of radio waves and the alternating currents which carry radio signals. • Microwave: is not meant to suggest a wavelength micrometer, have smaller wavelength compared to radio broadcasting. • Frequency Range: 300MHz-300GHz • Wavelength: 1mm – 1m • Both includes UHF (0.3-3GHz), SHF (3-30GHz) and EHF (30-300GHz) signals. 8
- 10. 10
- 11. IEEE Microwave Frequency Band 11
- 13. Microwave Sources • High power microwave sources use specialized vacuum tubes to generate microwave. • Operate on the principle of ballistic motion of electrons in a vacuum under the influence of controlling electric or magnetic field. • Includes magnetron, klystron, travelling wave tube (TWT) and gyrotron. • These devices work in the density modulated mode. (work on the basis of clumps of electrons flying ballisticially through them, rather than using a continuous stream of electrons). 13
- 14. • Lower power microwave sources use solid state devices such as the FET, tunnel diodes, Gunn diodes and IMPATT diodes. • MASER is a solid state device which amplifies microwave using similar principle to the LASER, which amplifies higher frequency light waves. 14
- 15. Advantages of using higher frequency • Larger instantaneous bandwidth for much information • Higher resolution for radar imaging and sensing • Less interference by near by application • Higher speed for digital communication, signal processing and transmission • Less crowded spectrum • Difficulty in jamming (military application) 15
- 16. Disadvantages of using high frequency • More expensive component • Higher atmospheric loss • Reliance in GaAs technology rather than Si technology • Higher component losses, lower output power from active devices • Microwave devices 16
- 17. Microwave Applications • Communication – Before the advent of fiber-optic transmission, most long-distance telephone calls were carried via networks of microwave radio relay links using FDM. – Wireless LAN protocols, such as Bluetooth and the IEEE 802.11 specifications, also use microwaves in the 2.4 GHz ISM band. – Wireless internet access IEEE 802.11a uses microwaves at 3.5-4 GHz range. – Metropolitan area network (MAN) protocols, such as WiMAX (Worldwide Interoperability for Microwave Access) are based on standards such as IEEE 802.16, designed to operate between 2 to 11 GHz. – Mobile Broadband Wireless Access (MBWA) protocols based on standards specifications such as IEEE 802.20 operate between 1.6 and 2.3 GHz. 17
- 18. Microwave Applications • Communication – Mobile phone networks, like GSM, use the low-microwave/high- UHF frequencies around 1.8 and 1.9 GHz in the Americas and elsewhere, respectively. – Most satellite communications systems operate in the C, X, Ka, or Ku bands of the microwave spectrum. – Satellite TV either operates in the C band for the traditional large dish fixed satellite service or Ku band for direct-broadcast satellite. – Military communications run primarily over X or Ku-band links. • Commercial Applications – Commercial implementations are in the 2.3 GHz, 2.5 GHz, 3.5 GHz and 5.8 GHz ranges (ISM band- Industry, Science and Medicine band). 18
- 19. Microwave Applications • Navigation – Global Navigation Satellite Systems (GNSS) broadcast navigational signals in various bands between about 1.2 GHz and 1.6 GHz. – These include the Chinese Beidou, the American Global Positioning System (GPS) and the Russian GLONASS. • RADAR – Radar uses microwave radiation to detect the range, speed, and other characteristics of remote objects. – Weather prediction – Geological survey for natural resource exploration. – Air traffic control, road traffic surveillance. 19
- 20. Microwave Applications • Radio astronomy – Celestial body research. – Distance measurement. • Heating and Power Application – A microwave oven uses microwave radiation at a frequency near 2.45 GHz. – Dielectric heating through energy absorption. – Microwave heating is used in industrial processes for drying and curing products. • Security – RFID based identification system. – Motion detectors. 20
- 21. Microwave Applications • Medical Use – Photoacoustic imaging (ultrasound). – CT scan, X-rays, MRI like imaging. – Thermo-therapy, LASER therapy. – Cancer treatment. 21
- 22. Behavior of circuits at conventional and RF/Microwave bands Resistor 22
- 23. 23
- 24. 24
- 25. Inductor 25
- 26. 26
- 27. Capacitors 27
- 28. 28
- 29. Behavior of Circuits at Conventional and RF/Microwave Bands Low Frequency/ Conventional • Bandwidths are limited hence small no. of channels can be adjusted. • It uses lumped element circuit theory. • Current flow and voltage drops are used to calculate power. • Open wire, twisted cables, co-axial cables are used as transmission lines. RF/Microwaves • Provide large bandwidth so its possible to adjust large no. of channels. • It uses distributed circuit theory (ohm/m, H/m, F/m). • Scattering phenomena like absorption, reflection, refraction, etc. are used in power calculation. • Optical fibers, waveguides, strip lines, micro-strip lines are common transmission lines. 29
- 30. Behavior of Circuits at Conventional and RF/Microwave Bands Low Frequency/ Conventional • Lumped circuit elements are used such as resistors, filters, oscillators, etc. • It uses current modulated mode. • Almost all the solid state devices can be used. • It can handle low power. RF/Microwaves • Cavity resonators or resonant lines are used as oscillators, resonators, etc. • Density modulation or velocity modulation are used using magnetrons, klystrons, TWTs, etc. • Vacuum tube like devices, micro-miniaturised solid state devices like Gunn diodes, tunnel diodes, IMPITT, TRAPPIT, etc. are used. • It can handle higher power. 30
- 31. Assignment #1 31 1. Mention the microwave frequency band specified by IEEE. What are the advantages and disadvantages of using microwave signal? 2. Define microwave signal? Explain the characteristics behavior of passive component at microwave frequency. 3. Compare and contrast the circuit behavior in conventional low frequency and RF/Microwave frequency band. What are the application areas of microwave system? 4. Explain the general microwave system with clear diagram. Explain the characteristics of microwave signal. 5. Differentiate between microwave and acoustic/seismic wave. 6. Write short notes on: Gunn Diode, IMPATT Diode and MASER. Due Date: One Week from this Slide
- 32. Thank You 32