Lesson 2 introduction in computing

Software
Development Life
Cycle(SDLC)

What is SDLC?
SDLC is a process followed for a software project, within A software
organization. It consists of a detailed plan describing how to develop,
maintain, replace and alter or Enhance Specific software. The life cycle defines
a methodology for improving the quality of software and the overall
development process.

Stage 1
:Planning and RequirementAnalysis
Requirement analysis is the most important and fundamental stage in SDLC.Itis
performed by the senior members of the team with inputs from the customer,
sales department, market surveys and domain experts in the industry. This
information is then used to plan the basic project approach and to conduct
product feasibility study in the economical, operational, and technicalareas.

Stage 2:DefiningRequirements
Once the requirement analysis is done the next step is to clearly define and
document the product requirements and get them approved from thecustomer
or the market analysts. This is done through ‘SRS’– Software Requirement
Specification document which consists of all the product requirements to be
designed and developed during the project lifecycle.

Stage 3:Designing the product architecture
SRSis the reference for product architects to come out with the best architecture
for the product to be developed. Based on the requirements specified in SRS,
usually more than one design approach for the product architecture is proposed
and documented in a DDS - Design Document Specification. This DDSis
by all the important stakeholders and based on various parameters asrisk
assessment, product robustness, design modularity ,budget and time
the best design approach is selected for the product.

Stage 4:Building or Developing the Product
Inthis stage of SDLC the actual development starts and the product is built. The
programming code is generated as per DDS during this stage. Ifthe design is
performed in a detailed and organized manner
, code generation can be
accomplished without much hassle.
Developers have to follow the coding guidelines defined by their organization
and programming tools like compilers, interpreters, debuggers etc are used to
generate the code. Different high level programming languages such as C, C++,
Pascal, Java,and PHP are used for coding. The programming language is
with respect to the type of software being developed.

Stage 5:TestingtheProduct
This stage is usually a subset of all the stages as in the modern SDLC models, the
testing activities are mostly involved in all the stages of SDLC.However this stage
refers to the testing only stage of the product where products defects are
reported, tracked, fixed and retested, until the product reaches the quality
standards defined in the SRS.

Stage 6:Deployment in the Market and Maintenance
Once the product is tested and ready to be deployed it is released formally in
appropriate market. Sometime product deployment happens in stages as per
organizations’ business strategy. The product may first be released in alimited
segment and tested in the real business environment (UAT- User acceptance
testing).
Then based on the feedback, the product may be released as it is or with
suggested enhancements in the targeting market segment. After the product is
released in the market, its maintenance is done for the existing customer base.

SDLC MODELS
WATERFALLMODEL
ITERATIVE MODEL
SPIRALMODEL
V-MODEL
BIGBANG MODEL
AGILE MODEL

Waterfall Model
Waterfall model is the earliest SDLC approach that was used for software
development .The waterfall Model illustrates the software development processin
linear sequential flow; hence it is also referred to as a linear-sequential life cycle
model. This means that any phase in the development process begins only if the
previous phase is complete. Inwaterfall model phases do not overlap.

Requirement Gathering and analysis:All possible requirements of the system to be developed are
captured in this phase and documented in a requirement specification doc.
System Design: The requirement specifications from first phase are studied in this phase and system
design is prepared. System Design helps in specifying hardware and system requirements and also
helps in defining overall system architecture.
Implementation: With inputs from system design, the system is first developed in small programs
called units, which are integrated in the next phase. Each unit is developed and tested for its
functionality which is referred to as Unit Testing.
Integration and T
esting: All the units developed in the implementation phase are integrated into a
system after testing of each unit. Post integration the entire system is tested for any faults and
Deployment of system: Once the functional and non functional testing is done, the product is
deployed in the customer environment or released into the market.
Maintenance: There are some issues which come up in the client environment. T
ofix those issues
patches are released. Also to enhance the product some better versions are released. Maintenance
done to deliver these changes in the customer environment.

Waterfall Model Application
Requirements are very well documented, clear and fixed.
Product definition is stable.
Technology is understood and is not dynamic.
There are no ambiguous requirements .
Ample resources with required expertise are available to support the product.
The project is short.

Waterfall Model Pros & Cons
pros
Simple and easy to understand and
use.
Easy to manage due to the rigidity of
the model – each phase has specific
deliverables and a review process.
Works well for smaller projects where
requirements are very well
understood.
Clearly defined stages.
Easy to arrange tasks.
Process and results are well
documented.
cons
No working software isproduced
until late during the life cycle.
High amounts of risk and uncertainty.
Not a good model for complexand
object-oriented projects.
Poor model for long and ongoing
projects.
Not suitable for the projects where
requirements are at a moderate to
high risk of changing. So risk and
uncertainty is high with this process
model.
Adjusting scope during the life cycle
can end a project.

Iterative Model
An iterative life cycle model does not attempt to start with a full specification of
requirements. Instead, development begins by specifying and implementing just
part of the software, which is then reviewed in order to identify further
requirements. This process is then repeated, producing a new version of the
software at the end of each iteration of the model.

Iterative and Incremental development is a combination of both iterative design or
iterative method and incremental build model for development. During software
development, more than one iteration of the software development cycle may be in
progress at the same time and This process may be described as an "evolutionary
acquisition" or "incremental build" approach.
In incremental model the whole requirement is divided into various builds. During
each iteration, the development module goes through the requirements, design,
implementation and testing phases. Each subsequent release of the module adds
function to the previous release. The process continues till the complete system is
ready asper the requirement.
ri
The key to successful use of an iterative software development lifecycle is gorous
validation of requirements, and verification & testing of each version of the
software against those requirements within each cycle of the model. As the software
evolves through successive cycles, tests have to be repeated and extended to verify
each version of the software.

Iterative Model Application
Requirements of the complete system are clearly defined and understood.
Major requirements must be defined; however, some functionalities or requested
enhancements may evolve with time.
There is a time to the market constraint.
A new technology is being used and is being learnt by the development team while
working on the project.
Resources with needed skill set are not available and are planned to be used on
contract basis for specific iterations.
There are some high risk features and goals which may change in the future.

Iterative Model Pros and Cons
pos
Some working functionality can be developed quickly
and early in the life cycle.
Results are obtained early and periodically.
Parallel development can be planned.
Progress can be measured.
Lesscostly to change thescope/requirements.
Testing and debugging during smaller iteration iseasy.
Risksare identified and resolved during iteration; and
each iteration is an easily managed milestone.
Easier to manage risk - High risk part is done first.
Risk analysis is better.
It supports changing requirements.
Initial Operating time is less.
Better suited for large and mission-critical projects.
During life cycle software is produced early which
facilitates customer evaluation and feedback.
cons
More resources may be required.
Although cost of change is lesser but it is not
very suitable for changing requirements.
More management attention isrequired.
System architecture or design issues may arise
because not all requirements are gathered in the
beginning of the entire life cycle.
Defining increments may require definition of
the complete system.
Not suitable for smallerprojects.
Management complexity is more.
End of project may not be known which is arisk.
analysis.
Highly skilled resources are required for risk
Project’s progress is highly dependent upon the
risk analysis phase.

Spiral Model
Spiral model is a combination of iterative development process model and
sequential linear development model i.e. waterfall model with very high emphasis
on risk analysis. It allows for incremental releases of the product, or incremental
refinement through each iteration around the spiral.

Identification
This phase starts with gathering the business requirements in the baseline spiral. In the
subsequent spirals as the product matures, identification of system requirements, subsystem
requirements and unit requirements are all done in this phase.
This also includes understanding the system requirements by continuous communication
between the customer and the system analyst. At the end of the spiral the product is
deployed in the identified market.
Design
Design phase starts with the conceptual design in the baseline spiral and involves
architectural design, logical design of modules, physical product design and final design in
the subsequent spirals.
Construct or Build
Construct phase refers to production of the actual software product at every spiral. In the
baseline spiral when the product is just thought of and the design is being developed a POC
(Proof of Concept) is developed in this phase to get customer feedback.
Then in the subsequent spirals with higher clarity on requirements and design details a
working model of the software called build is produced with a version number. These builds
are sent to customer for feedback.

Evaluation and Risk Analysis
RiskAnalysis includes identifying, estimating, and monitoring technical feasibility
and management risks, such asschedule slippage and cost overrun. After testing the
build, at the end of first iteration, the customer evaluates the software and provides
feedback.
Based on the customer evaluation, software development process enters into the
next iteration and subsequently follows the linear approach to implement the
feedback suggested by the customer. The process of iterations along the spiral
continues throughout the life of the software.

Spiral Model Application
Spiral Model is very widely used in the software industry asit is in synch with the
natural development process of any product i.e. learning with maturity and also
involves minimum risk for the customer aswell asthe development firms. Following
are the typical uses of Spiral model:
When costs there is a budget constraint and risk evaluation is important
For medium to high-risk projects
Long-term project commitment because of potential changes to economic
priorities asthe requirements change with time
Customer is not sure of their requirements which is usually the case
Requirements are complex and need evaluation to get clarity
New product line which should be released in phases to get enough customer
feedback
Significant changes are expected in the product during the development cycle.

Spiral Model Pros and Cons
pros
Changing requirements can be
accommodated.
Allows for extensive use of prototypes
Requirements can be captured more
accurately.
Users see the system early.
Development can be divided into smaller
parts and more risky parts can be
developed earlier which helps better risk
management.
Process is complex
cons
Management is more complex.
End of project may not be known early.
Not suitable for small or low riskprojects
and could be expensive for small projects.
Spiral may go indefinitely.
Large number of intermediate stages
requires excessive documentation.

V –Model
The V- model is SDLCmodel where execution of processes happens in a sequential
manner in V-shape. Itis also known asVerification and Validation model.
V -Model is an extension of the waterfall model and is based on association of a
testing phase for each corresponding development stage. This means that for
single phase in the development cycle there is a directly associated testing phase.
This is a highly disciplined model and next phase starts only after completion of the
previous phase.

Following are the Verification phases in V-Model:
BusinessRequirement Analysis :
This is the first phase in the development cycle where the product requirements are understood from the customer
perspective. This phase involves detailed communication with the customer to understand his expectations and exact
requirement. This is a very important activity and need to be managed well, asmost of the customers are not sure about
what exactly they need. The acceptance test design planning is done at this stage asbusiness requirements can be used
asan input for acceptance testing.
System Design:
Once you have the clear and detailed product requirements, it’s time to design the complete system. System design
would comprise of understanding and detailing the complete hardware and communication setup for the productunder
development. System test plan is developed based on the system design. Doing this at an earlier stage leaves more time
for actual test execution later.
Architectural Design:
Architectural specifications are understood and designed in this phase. Usually more than one technical approach is
proposed and based on the technical and financial feasibility the final decision is taken. System design is broken down
further into modules taking up different functionality. This is also referred to asHigh Level Design (HLD).
The data transfer and communication between the internal modules and with the outside world (other systems) is clearly
understood and defined in this stage. With this information, integration tests can be designed and documented during
this stage.

Module Design:
In this phase the detailed internal design for all the system modules is specified,
referred to asLow Level Design (LLD).It is important that the design is compatible
with the other modules in the system architecture and the other external systems.
Unit tests are an essential part of any development process and helps eliminate the
maximum faults and errors at a very early stage. Unit tests can be designed at this
stage based on the internal module designs.
Coding Phase
The actual coding of the system modules designed in the design phase is taken up in
the Coding phase. The best suitable programming language is decided based on the
system and architectural requirements. The coding is performed based on the coding
guidelines and standards. The code goes through numerous code reviews and is
optimized for best performance before the final build is checked into the repository.

Validation Phases
Following are the Validation phases in V-Model:
Unit Testing
Unit tests designed in the module design phase are executed on the code during this validation
phase. Unit testing is the testing at code level and helps eliminate bugs at an early stage, though all
defects cannot be uncovered by unit testing.
Integration Testing
Integration testing is associated with the architectural design phase. Integration tests are
to test the coexistence and communication of the internal modules within the system.
System Testing
Systemtesting is directly associated with the Systemdesign phase. Systemtests check the entire
system functionality and the communication of the system under development with external
Most of the software and hardware compatibility issues can be uncovered during system test
execution.
Acceptance Testing
Acceptance testing is associated with the business requirement analysis phase and involves testing
the product in user environment. Acceptance tests uncover the compatibility issues with the other
systems available in the user environment. Italso discovers the non functional issues such as load
performance defects in the actual user environment.

V-Model Application
V- Model application is almost same aswaterfall model, asboth the models are of
sequential type. Requirements have to be very clear before the project starts,
because it is usually expensive to go back and make changes. This model is used in
the medical development field, asit is strictly disciplined domain. Following are the
suitable scenarios to use V-Model:
Requirements are well defined, clearly documented and fixed.
Product definition is stable.
Technology is not dynamic and is well understood by the project team.
There are no ambiguous or undefined requirements
The project is short.

V-Model Pros andCons
pros
This is a highly disciplined model and
Phases are completed one at a time.
Works well for smaller projects where
requirements are very well understood.
Simple and easy to understand and
use.
Easy to manage due to the
rigidity of the model – each phase has
specific deliverables and a review
process .
cons
High risk and uncertainty.
Not a good model for complex and object-
oriented projects.
Poor model for long and ongoing projects.
Not suitable for the projects where
requirements are at a moderate to high risk
of changing.
Once an application is in the testing stage, it
is difficult to go back and change a
functionality
No working software is produced until late
during the life cycle.

Big Bang Model
The Big Bang model is SDLCmodel where there is no specific process followed. The
development just starts with the required money and efforts asthe input, and the
output is the software developed which may or may not be asper customer
requirement.
Big Bang Model is SDLC model where there is no formal development followed and
very little planning is required. Even the customer is not sure about what exactly he
wants and the requirements are implemented on the fly without much analysis.
Usually this model is followed for small projects where the development teams are
very small.

Big BangModel designand Application
Big bang model comprises of focusing all the possible resources in software
development and coding, with very little or no planning. The requirements are
understood and implemented as they come. Any changes required may or may
not need to revamp the complete software.
This model is ideal for small projects with one or two developers working
together and is also useful for academic or practice projects. It’s an ideal model
the product where requirements are not well understood and the final release is
not given.

Big BangModel Pros and Cons
pros
This is a very simple model
Little or no planning required
Easyto manage
Very few resources required
Gives flexibility to developers
Is a good learning aid for new comers
or students.
cons
projects.
Very High risk and uncertainty.
Not a good model for complexand
object-oriented projects.
Poor model for long and ongoing
Can turn out to be very expensiveif
requirements are misunderstood.

Agile Model
Agile SDLC model is a combination of iterative and incremental process models
with focus on process adaptability and customer satisfaction by rapid delivery of
working software product.
Agile Methods break the product into small incremental builds. These builds are
provided in iterations. Each iteration typically lasts from about one to threeweeks.
Every iteration involves cross functional teams working simultaneously on various
areas like planning, requirements analysis, design, coding, unit testing, and
acceptance testing. At the end of the iteration a working product is displayed to
the customer and important stakeholders.

What is Agile?
Agile model believes that every project needs to be handled differently and the
existing methods need to be tailored to best suit the project requirements. In agile
the tasks are divided to time boxes (small time frames) to deliver specific features for
a release. Iterative approach is taken and working software build is delivered after
each iteration. Each build is incremental in terms of features; the final build holds all
the features required by the customer.

Agile uses adaptive approach where there is no detailed planning and there is
clarity on future tasks only in respect of what features need to be developed.There
is feature driven development and the team adapts to the changing product
requirements dynamically. The product is tested very frequently, through the
release iterations, minimizing the risk of any major failures in future.
Customer interaction is the backbone of Agile methodology, and open
communication with minimum documentation are the typical features of Agile
development environment. The agile teams work in close collaboration with each
other and are most often located in the same geographical location.

Agile Model Pros and Cons
pros
Is a very realistic approach to software
development
Promotes teamwork and cross training.
Functionality can be developed rapidly and
demonstrated.
Resource requirements are minimum.
Suitable for fixed or changing requirements
Delivers early partial working solutions.
Good model for environments that change
steadily.
Minimal rules, documentation easilyemployed.
Enables concurrent development and delivery
within an overall planned context.
Little or no planning required
Easyto manage
Gives flexibility to developers
cons
dependencies.
extensibility.
work.
the wrong direction.
generated.
Not suitable for handling complex
More risk of sustainability, maintainability and
An overall plan, an agile leader and agile PM
practice is a must without which it will not
Strict delivery management dictates the
scope, functionality to be delivered, and
adjustments to meet the deadlines.
Depends heavily on customer interaction, so
if customer is not clear, team can be driven in
There is very high individual dependency,
since there is minimum documentation
Transfer of technology to new team members
may be quite challenging due to lack of
documentation

Lesson 2 introduction in computing

Recommended

More Related Content

What's hot (20)

Similar to Lesson 2 introduction in computing (20)

Recently uploaded (20)

Lesson 2 introduction in computing