Liebherr r954 c 1381 hydraulic excavator service repair manual

MJFCIFSS
Wednesday, 25.December 2019 15:24 printed this protected document! R934C-R944C-R954C_en.pdf ADMIN

Service Manual
copyright by
MJFCIFSS
1 General information
2 Tools
3 Technical data / Maintenance guidelines
4 Engine / Motor
5 Coupling / Splitterbox
6 Hydraulic system
7 Hydraulic components
8 Electrical system
9 Swing gear
10 Swing ring
11 Travel gear
12 Track components
13 Undercarriage
14
15
16 Options
17 Cab / Heater / Air conditioning system
18 Central lubrication

Service Manual
MJFCIFSS
copyright by
Introduction
This manual contains technical data, design and functional descriptions, as well as service and set
up instructions. The documents include numbers of drawings, functional diagrams, as well as detailed
views of units and assemblies of LIEBHERR hydraulic excavators.
This manual has been created in order to assist the customer support services, but does of course
replace neither proper technical training and qualification of the user nor participation in LIEBHERR
operator training courses.
General basic technical information is not included in this manual. For operating instructions and
information on spare parts, please refer to the separate documentation.
For maintenance and reparation of the machine, follow conscientiously the safety instructions and
warnings.
Symbols used in this manual
In this manual the description of tasks and procedures that are associated with specific dangers are
accompanied by safety instructions mentioning the danger related to described work. The safety
instructions are graded according to the severity of the risk, and are identified with the symbols
«Danger» and «Caution», which have the following significances:
These terms are identified by symbols in the operating instructions and :
The symbol «Note» is destined to attract the attention of the persons having to intervene on the
machine upon observations and comments concerning the procedure to be followed for operating as
well for maintenance or repair works.
Signification of specific punctuation marks in descriptions
This mark indicates «a requirement that must be fulfilled», before going on with the procedure
below.
This mark identifies «an injunction to perform the mentioned action».
This mark indicates «the normally expected result of a carried out action».
About the contain of this Service Manual
This manual may not be replicated or made available to third parties without the explicit written
consent of LIEBHERR, who retains all rights in this documents.
All rights reserved - Printed in France.
Danger!
Warning referring to a danger where there is a high probability of death or serious injury to
operators, unless the prescribed safety measures are taken.
Caution!
Warning relating to dangers that might lead to injury or machine damages, unless the prescribed
safety measures are taken.
Note!
Comments and advices which will, if adhered to, help you to keep your excavator operating, to
insure longlife to your machine and to facilitate certain procedures.

Service Manual
MJFCIFSS
copyright by
This manual shall be amended without prior notice to reflect new technical developments and
machine series. LIEBHERR reserves the right to make minor technical amendments to the machines
that might not be reflected in the accompanying documentation.
This manual might be complemented by additional service information sheets issued by LIEBHERR.
This manual has been compiled and published by the Technical Documentation Department of
LIEBHERR-FRANCE SAS 68005 Colmar cedex.
We hope that the information in this documentation, aimed at improving the service of LIEBHERR
excavators, is useful to you.
Structuration of our Service Manuals
In order to make it easy for users to find a specific sheet or information on a certain group, and to file
amended and additional pages, each page is identified as follows:
.
The main groups are listed in the table of contents at the beginning of the book.
The subgroups are listed on a subgroup index, on the first page of each main group section. This
subgroup index also includes the indication of machines modells, types and serial number to which
the subgroup is relevant.
Example
Main Group
7. = Main Group «Hydraulic com-
ponents»
Sub Group
12. = Sub Group «Variable Flow
Hydraulic Pump - Type LPVD»
Number of the Page in Sub Group
14. = Page «Adjustment for
Variable Flow Hydraulic Pump
LPVD»
7. 12. 14

Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.

MJFCIFSS

Liebherr r954 c 1381 hydraulic excavator service repair manual

More Related Content

More from ufdjjsjejfkkekm (20)

Recently uploaded (20)

Liebherr r954 c 1381 hydraulic excavator service repair manual