Machine learning-based intrusion detection system for detecting web attacks

IAES International Journal of Artificial Intelligence (IJ-AI)
Vol. 13, No. 1, March 2024, pp. 711~721
ISSN: 2252-8938, DOI: 10.11591/ijai.v13.i1.pp711-721  711
Journal homepage: http://ijai.iaescore.com
Machine learning-based intrusion detection system
for detecting web attacks
Fatimetou Abdou Vadhil, Mohamed Lemine Salihi, Mohamedade Farouk Nanne
Department of Mathematics and Computer Science, Faculty of Sciences and Technics, University of Nouakchott,
Nouakchott, Mauritania
Article Info ABSTRACT
Article history:
Received Mar 20, 2023
Revised Sep 11, 2023
Accepted Sep 16, 2023
The increasing use of smart devices results in a huge amount of data, which
raises concerns about personal data, including health data and financial data.
This data circulates on the network and can encounter network traffic at any
time. This traffic can either be normal traffic or an intrusion created by hackers
with the aim of injecting abnormal traffic into the network. Firewalls and
traditional intrusion detection systems detect attacks based on signature
patterns. However, this is not sufficient to detect advanced or unknown
attacks. To detect different types of unknown attacks, the use of intelligent
techniques is essential. In this paper, we analyse some machine learning
techniques proposed in recent years. In this study, several classifications were
made to detect anomalous behaviour in network traffic. The models were built
and evaluated based on the Canadian Institute for Cybersecurity-intrusion
detection systems dataset released in 2017 (CIC-IDS-2017), which includes
both current and historical attacks. The experiments were conducted using
decision tree, random forest, logistic regression, gaussian naïve bayes,
adaptive boosting, and their ensemble approach. The models were evaluated
using various evaluation metrics such as accuracy, precision, recall, F1-score,
false positive rate, receiver operating characteristic curve, and calibration curve.
Keywords:
CIC-IDS-2017
Cybersecurity
Intrusion detection systems
Machine learning
Web attacks
This is an open access article under the CC BY-SA license.
Corresponding Author:
Fatimetou Abdou Vadhil
Department of Mathematics and Computer Science, Faculty of Sciences and Technics
University of Nouakchott
Nouakchott, Mauritania
Email: fatiab38@gmail.com
1. INTRODUCTION
Recent technologies such as artificial intelligence, big data, and internet of things. have made our lives
exponentially dependent on the internet. Alongside this, however, the number of anomalous behaviours is also
becoming increasingly important [1], [2]. Detecting anomalous network activity is a critical cybersecurity task
that is becoming more and more of a focus, especially as we rely more and more on computers and smartphones
in recent years [3]–[5]. Due to the global pandemic, we can say that our daily lives are shifting to the internet,
which makes security issues more complicated than before. To detect abnormal activities in a computer or
network, there is a special security device called network intrusion detection system (NIDS) [6], [7].
Intrusion detection systems (IDS) are security tools that aim to defend a system, perform
countermeasures or generate alerts for a facility to take appropriate action when an attack occurs [8]. An IDS
may be a software or hardware system designed to detect malicious actions on computer systems to enable the
maintenance of system security [9]. The main purpose of IDS is to detect various types of abnormal network
traffic that cannot be detected by a simple traditional firewall [10]. This is critical to achieve solid protection
against malicious acts that compromise the availability, integrity or confidentiality of computer

 ISSN: 2252-8938
Int J Artif Intell, Vol. 13, No. 1, March 2024: 711-721
712
systems [11], [12]. These systems can also be targeted at different areas. Some IDS play an extended firewall
role and detect attacks as they enter the network, others monitor the network internally to intercept intruders
or even collect network-wide information for central analysis. Most of these systems have a similar structure
and set of components. There are two main types of intrusion detection systems [13].
Host intrusion detection system (HIDS) and network intrusion detection system (NIDS). The HIDS
monitors the characteristics of a single host and the events occurring on that host to detect suspicious activity.
NIDS monitors network traffic for specific network segments or devices and analyses the network.
Four main approaches are used for intrusion detection [13]: Signature-based IDS, anomaly-based IDS,
hybrid-based IDS, and protocol-based IDS. Signature-based IDS detect hosts and malicious network activities
based on known malicious patterns or sequences. Anomaly-based IDS show abnormal or anomalous system
behaviour. It creates a profile of normal activity. If the normal activity exceeds the predefined threshold, it is
considered an intrusion. Any deviation from the threshold is considered abnormal behaviour. Hybrid-based
IDS combine the above two approaches (signature and anomaly-based IDS) to avoid the disadvantages and
integrate the advantages. Protocol-based IDS monitor the protocols used by the system while performing an
analysis of the state and dynamic behaviour and apply the legal use of the protocol.
Most of these types of IDS are still in traditional use and the cost of generating an appropriate signature
for such an attack can be a considerable motivation for the use of learning-based approaches such as ML
algorithms. These algorithms are progressing rapidly [14], [15], and are being followed with great interest in
the field of cyber security [16]. Machine learning (ML) techniques can automatically learn to make decisions
based on existing data, which is a very valuable advantage for monitoring computing environments.
In the field of intrusion detection, two types of ML algorithms are generally used: Supervised
classification for misuse detection and unsupervised outlier/novelty classification for anomaly detection [17].
ML algorithms are increasingly being used to improve IDS and make it more efficient. A large number of
research papers on intrusion detection fields using ML techniques have been published in the literature. For
example, the authors of [18], [19] used support vector machine (SVM) to find anomalies in the knowledge
discovery in database (KDD) dataset. Stein et al. [20] constructed an IDS model with artificial neural networks
(ANN) based on the same dataset. Authors in [21], [22] proposed the use of decision trees and random forest.
In addition, a hybrid approach combining two or more ML algorithms was presented in [23]. For more
information on intrusion detection systems using ML methods, the reader is strongly advised to read the
reviews provided in [24]–[26].
However, some recent papers find that conventional ML algorithms still perform poorly compared to
other alternatives. The reason may be simply because the model parameters are not set appropriately or not set
at all. Most algorithms provide many parameter values that can be used to improve model performance.
Therefore, these parameter values can be adjusted to select the most optimal model. This article will review
the optimization of conventional ML algorithms using hyper parameter tuning to achieve good results based
on the values available in each algorithm.
This section analyses various research papers that use ML algorithms and exploit their performance
for intrusion detection. The focus here is on studies that use the Canadian Institute for Cybersecurity - intrusion
detection systems dataset released in 2017 (CIC-IDS-2017) dataset. This dataset was proposed by
Sharafaldin et al. [27] in 2017. They tested it with seven algorithms, namely random forest (RF), ID3, k-nearest
neighbours (KNN), multilayer perceptron (MLP), Adaboost, Naive Bayes (NB), quadratic discriminant
analysis (QDA). They prove that the KNN, RF and ID3 algorithms give the best results with 98% accuracy
compared to the other algorithms.
Vijayanand et al. [28] proposed an IDS that uses a genetic algorithm (GA) for variable selection and
a support vector machine (SVM) for classification. In this paper, classification is based on a combination of
several SVMs, each designed to detect a specific type of attack. The same algorithm is used by Aksu et al. [29]
with other algorithms such as k-nearest neighbor (KNN) and decision tree (DT). The authors of this paper use
the fisher score method for variable selection and achieved detection rates of 99.70%, 57.76%, and 99.00% for
SVM, KNN, and DT classifications, respectively, using the denial-of-service (DoS) and distributed denial-of-
service (DDoS) attacks of CIC-IDS-2017 for testing.
Bansal [30] describes a data dimensionality reduction method called data dimensionality reduction
(DDR) and uses conditional tree (CTree) [8], extreme gradient boosting (XGBoost) [31], SVM, and artificial
neural network algorithms (ANN). Among these estimators, XGBoost was the most efficient with an accuracy
of 98.93%. The authors of this paper used the entire dataset except for the normal traffic provided on Monday.
Boukhamla and Gaviro [32] uses principal component analysis (PCA) to reduce the overall size of the
CIC-IDS-2017 dataset. This work was used for Thursday and Friday data targeting various attacks such as
DDoS, web attacks, port scans, infiltration, and botnets. KNN, Naive Bayes (NB), and C4.5 are the algorithms
used for classification. DDoS attacks are perfectly detected by Naive Bayes and KNN with a very high

Int J Artif Intell ISSN: 2252-8938 
Machine learning-based intrusion detection system for detecting web attacks (Fatimetou Abdou Vadhil)
713
detection rate. However, Naive Bayes has a high false alarm rate, whereas KNN does not. In particular, the
number of variables was reduced by about 75% of the total number of variables.
Ustebay et al. [33] proposes a hybrid IDS that combines three algorithms, namely reduced error
pruning (REP) tree and random forest. They claim that the experimental results of this IDS demonstrate good
performance in terms of detection rate, false alarm rate, accuracy, and duration compared to existing systems.
The accuracy achieved in this proposal is 96.66%.
Hou et al. [34] presented a ML approach based on DDoS attack detection using netflow traffic
analyzer (NTA). It mainly used four algorithms, namely AdaBoost, C4.5, support vector machine and random
forest, against the data collected by netflow. This approach is then evaluated against the object dataset. Based
on the results of the experiment, 97.4% accuracy was achieved using this approach.
Bansal and Kaur [35] proposed an intrusion detection approach using the XGBoost algorithm. This
approach uses DoS/DDoS data from CIC-IDS-2017. The work is completed with 99.54% accuracy.
Aksu et al. [29] proposed an IDS using fisher score algorithm for selecting variables for normal and
DDoS traffic. The algorithms used for attack classification are: SVM, KNN, and DT. In this work, the
evaluation showed that KNN performed best with 30 variables selected, while SVM failed with 80 and 30
variables. After applying the fisher score, the amount of data was reduced by 60%. As a result of this work,
KNN, and DT models scored 99% and 99%, and SVM scored 57% with 30 variables selected.
Alrowaily et al. [36] investigated the efficiency of seven ML algorithms, including RF, NB, DT,
AdaBoost, MLP, quadratic discriminant analysis (QDA), and k-nearest neighbors (KNN). The result confirms
the superiority of KNN on various performance evaluation metrics with 99% accuracy among the other selected
algorithms. However, all the selected algorithms trained within acceptable time frame except this algorithm.
Thapa et al. [37] propose an ensemble model that combines ML and deep learning (DL) algorithms
to achieve high performance metrics. They compared their models using the CIC-IDS-2017 dataset. In this
article, the significance of variables was studied using classification and regression tree (CART) and
classification using convolutional neural network (CNN). The accuracy obtained in this article is 99%.
Maseer et al. [38] review previous studies on ML and DL based IDS using a set of criteria with
different datasets. In this article, 10 common supervised and unsupervised ML algorithms are evaluated. The
supervised algorithms used are ANN, DT, KNN, NB, RF, SVM, and CNN, while the unsupervised algorithms
include k-means, expectation-maximisation (EM), and self-organising maps (SOM). The best results were
obtained with KNN (accuracy = 99.52%), DT (accuracy = 99.49%), and CNN (accuracy = 99.47%) as these
models have higher recognition performance compared to other models.
The variables that can be used for designing and implementing an effective ML based IDS are
analysed [39]. The selected variables are applied to different ML methods to test the efficiency. This research
is conducted on the CIC-IDS-2017 dataset using 30% of the data and 100% of the data from Wednesday. The
best result is obtained with the random forest, which achieves an accuracy of 99.9% and a false positive rate
(FPR) rate of 0.02%.
A systematic approach to decision support in the selection of algorithms for the design of an IDS is
presented [40]. The authors of this paper used the CIC-IDS-2017 dataset and selected 51 variables using the
mean decrease in impurity (MDI) technique. They then evaluated the recognition performance of eight
algorithms. The decision tree, random forest and multi-layer perceptron algorithms achieved 99% accuracy.
Elmrabit et al. [41] evaluated twelve ML algorithms in terms of their ability to detect abnormal
behaviour in network practice. The evaluation is performed on the CIC-IDS-2017, UNSW-NB15, and
industrial control system (ICS) cyberattacks datasets. The results of the evaluation show that the random forest
algorithm performs better in terms of accuracy, precision, recall, F1 score, and receiver operating characteristic
(ROC) curve for the three datasets used.
In terms of web attacks, Goryunov et al. [42] presented a study that includes the analysis and
evaluation of different classifiers such as decision tree, random forest, AdaBoost, and logistic regression. The
evaluation was done using the CIC-IDS-2017, more specifically web attacks (brute force, cross site scripting
(XSS), and structured query language injection (SQLi)). Moreover, the top 10 features were selected, which is
why the training time was very low in this study.
2. DATASET
The type of data is crucial in terms of quality and quantity for any ML problem, as a lot of important
data is required for good training of ML algorithms. The outcome of any classifier depends on the trained data,
so the quality of the data helps to achieve good results. Unfortunately, such quality datasets are also expensive
and difficult to produce. In the field of intrusion detection, two free datasets are particularly popular despite
some shortcomings: KDD Cup 99 and NSL-KDD. Three other recent datasets that address some of the
shortcomings of earlier datasets are CIC-IDS-2017, CIC-IDS2018, and LITNET-2020.

 ISSN: 2252-8938
714
Based on some reviews and studies [27], [43]–[45], we decided to use CIC-IDS-2017. This dataset
was created by the Canadian Institute of Cybersecurity - University of New-Brunswick and generated by
Sharafaldin et al. [27] in 2017. It is fully labelled and contains 78 features and seven main attack classes such
as: web attacks, portscan, botnet, heartbleed, DoS/DDoS, and infiltration. In this paper, we use the data
collected under Web Attacks, which consists of SQL Injection, XSS, and Brute Force.
- SQL injection: This is a vulnerability in an application where the attacker interferes with an application's
queries to the database to allow unauthorised users to access the data.
- XSS: This attack occurs when the attacker injects malicious code into the victim's web application.
- Brute force: This attack tries a number of possible passwords to crack the administrator's password.
We focus on web attacks because, despite their importance, they are rarely the subject of research
compared to other types of attacks. For example, many researchers focus on DoS/DDoS attacks. This could
also be the reason why most datasets do not include this type of attack. Therefore, it is a matter of popularity
of certain attacks over others.
3. METHODOLOGY
This section discusses the methodology used in this paper. After selecting the dataset, the next and
most important step is to prepare it. This step is called pre-processing and includes analysis, processing, coding,
and normalization. The dataset CIC-IDS-2017 is analysed and trained with five supervised ML algorithms:
decision tree (DT) [46], random forest (RF) [47], logistic regression (LR) [48], Gaussian Naive Bayes
(GNB) [49], and AdaBoost or adaptive boosting (AB) [50]. The models implemented with these algorithms
are optimised by tuning their hyperparameters. This optimisation is performed despite the
GridSearchCrossValidation technique.
3.1. Data acquisition
The first step of the proposed methodology is to import dataset. The data used contains 170,231
records. Table 1 shows the number of records by attack and the distribution between training and test data.
3.2. Data cleaning and analysis
The selected data (the "web attacks" file recorded on Thursday) contains 170,231 samples. In this
section, we analyse this data to identify potential problems and possible errors such as missing values and
duplicate columns. While searching for these values, we found that this dataset contains 270 missing values,
ranging from not a number (NaN) to infinity. On the other hand, the Fwd header length column is found twice.
All values that are NaN or infinity are removed, and then the duplicate column is also removed. It is also
important to check the class equilibrium in the response features (or target) as this is very important for most
ML algorithms. We have therefore analysed the feature in question and the classes are really unbalanced.
The majority class is the normal traffic class, which takes 168051 of the data. The rest is distributed
among other classes, 1,507 for brute force, 652 for XSS, and 21 for SQL injection. This problem of imbalance
can be solved by oversampling, followed by pre-emptive cleaning of possible overlap points.
3.3. Encoding
To train a ML model, the raw data must be prepared in a form that can be understood by the model.
For this reason, digitisation of the data is an essential phase. In the proposed method, the one-hot encoder
scheme is used to convert non-numeric variables into vectors. One-hot encoding is the most widely used
encoding method [51]. It converts categorical values into vectors with minimal processing. It is a defensive
feature of certain techniques. This is the most common method for handling such multiclass classification tasks.
As shown in Table 2 the categorical classes are converted to vectors.
Table 1. Data distribution
Class Data points Training data Testing data
Benign 168,051 134,461 33,590
Brute Force 1,507 1,187 320
XSS 652 518 134
SQLi 21 18 3
Table 2. One hot encoding
Class Benign Brute force SQLi XSS
Benign 1 0 0 0
Brute force 0 1 0 0
SQLi 0 0 1 0
XSS 0 0 0 1
3.4. Features scaling
Feature scaling is a technique often used in data preparation to facilitate its use by ML algorithms.
The purpose of this scaling is to bring the values of the numerical features in the data set to a common scale,
while preserving the differences in the value ranges of the individual features. Thus, by scaling the features,

715
the range of data-independent features is normalised. In data preprocessing, scaling is often done using one of
two methods: normalisation or standardisation. Feature scaling should be performed during data preprocessing.
We use a normalisation method known as min-max. It is the simplest method and involves scaling the range
of features to scale the range in [0, 1]. The general normalisation is as (1).
x′
=
x−min⁡(x)
max(x)−min⁡(x)
(1)
3.5. Classification and hyper-parameters tuning
In this phase, the data is submitted to the decision tree (DT), random forest (RF), logistic regression
(LR), Gaussian Naïve Bayes (GNB), and adaptive boosting (AB) algorithms for training. To obtain the best
model parameters, we used the GridSearchCV technique. This is a method for selecting the best model from a
family of models parameterised by a grid of parameters, i.e. all the possibilities of the parameters are traversed
in a grid of parameters. In addition, GridSearch performs cross-validation. Table 3 shows the details of the
values used for each model. For each algorithm, the best values selected by GridSearchCV are fitted to build
the model. Algorithm 1: Hyper parameter tuning algorithm used in this research for decision tree, random
forest, and AdaBoost.
a. x ← 0
b. hyper parameter 1
c. while x ≤ 314 do
d. Perform a 5-fold cross-validation on CIC-IDS-2017 train set
e. Record the average 5-fold cross-validation accuracy
f. Increment hyper parameter by 1
g. Increment x by 1
h. Choose the best hyper parameter which gives the highest average GridSearchCV accuracy (in step. e)
The Algorithm 1 shows the process of hyper parameters tuning for the models. This algorithm is used with
GridSearchCV to select the good model. An overview of the proposed methodology is presented
in Figure 1.
Table 3. Model’s hyper parameters values
Classifier Hyper parameter Values Best values
DT Estimator_criterion ['gini', 'entropy'] ‘entropy’
Estimator _max_depth [4, 5, 6, 7, 8] 7
RF
Estimator_criterion ['gini', 'entropy'] ‘entropy’
Estimator _max_depth [4, 5, 6, 7, 8] 8
Estimator_max_features [‘auto’, ‘sqrt’, ‘log2’] ‘auto’
Estimator_n_estimators [100, 200] 200
LR
Estimator_penality [‘L1’, ‘L2’] ‘L2’
Estimator _C [100 ; 10 ; 1 ; 0.1 ; 0.01 ; 0.001 ; 0.0001] 0.01
Solver [‘sag’, ‘lbfgs’, ‘saga’] ‘lbfgs’
GNB Estimator_var_smoothing [1e-11, 1e-12, 1e-13, 1e-14, 1e-15] 1e-13
AB
Estimator_criterion ['gini', 'entropy'] ‘entropy’
Estimator_splitter [‘best’, ‘random’] ‘best’
N_estimators [1, 2, 3, 4, 5, 6, 7, 8] 2
Learning_rate [0.01, 0.1, 1] 1
Figure 1. Methodology followed by the experiment

 ISSN: 2252-8938
716
4. RESULTS AND DISCUSSION
The effectiveness of ML techniques has led researchers to use them in topical areas such as
IoT [52], [53], online social network [54], DoS detection, DDoS [55]–[60], and distributed reflexion denial of
service (DRDoS) [61]. However, obtaining good results depends on the techniques used, and the way in which
we create our models. Generally speaking, improving the results of ML models can be done in several ways,
for example by adjusting the model's hyperparameters as proposed in this article or by selecting the most
relevant features [62]–[68]. On the other hand, this selection is in the framework of traditional
models [69]–[74], this concept is still not valid, when it comes to DL models [75]–[80], if the model needs
optimisation, in this case other methods must be sought, as the selection of the most relevant features is done
automatically in most cases [81]. In this section, we present our experimental results using different evaluation
metrics for the various ML techniques based on the proposed methodology. Afterward, we provide a
comparison with some related works and discuss the performance of the proposed model. The models are
implemented with a portable PC with the following characteristics: i7-9750H CPU, processor, 8 GB memory,
hard disk 1 TB, and 64-bit Windows 10.
4.1. Evaluation metrics
After setting up the models, it is time to measure the performance by going through an evaluation
stage. Each model needs to be tested to confirm its reliability based on four possible outputs, true positives
(TP), false positives (FP), true negatives (TN), and false negatives (FN). The models used in this work were
evaluated based on accuracy, precision, recall, F1 score, FPR, and training and prediction time. Where:
- TP: True positives are events that are correctly identified as abnormal
- FP: False positives are legal events that are incorrectly identified as abnormal
- TN: True negatives are incidents that are correctly identified as legal activities
- FN: False negatives can be defined as possible intrusive activity that the IDS passes through as normal
activity.
Accuracy =
TP+TN
𝑇𝑃+𝐹𝑃+𝑇𝑁+𝐹𝑁
(2)
Precision =
TP
𝑇𝑃+𝐹𝑃
(3)
Recall =
TP
𝑇𝑃+𝐹𝑁
(4)
F1_score = 2 ∗⁡
Recall∗Precision
𝑅𝑒𝑐𝑎𝑙𝑙+𝑃𝑟𝑒𝑐𝑖𝑠𝑖𝑜𝑛
(5)
FPR =
FP
𝐹𝑃+𝑇𝑁
(6)
4.2. Experimental results
The best results are shared by the ensemble method (accuracy and precision), AdaBoost (recall and
FPR), and DT (F1_score). On the other hand, GNB was trained in a very reasonable time; the same is true for
the prediction time of LR. The computation time depends on the number of hyperparameters and the set of
values defined in each of the hyperparameters in grid search. The Table 4 presents the evaluation results to
show how the models performed.
Table 4. Performance evaluation of models on CIC-IDS-2017 (web attacks)
In order not to be limited to the previously used evaluation metrics, we evaluated the models with
other metrics such as ROC and calibration curves as shown in Figure 2. Other algorithms like gradient boosting,
support vector machine, k-nearest neighbors were tested, but since we use the GridSearchCV technique, which
Evaluation Decision Tree Random Forest Logistic Regression Gaussian Naïve Bayes AdaBoost Ensemble
Accuracy (%) 99.53 99.50 98.27 98.30 98.34 99.57
Precision (%) 99.56 99.52 99.36 97.97 99.16 99.59
Recall (%) 99.57 99.51 98.27 99.66 99.79 99.59
F1_score (%) 99.57 99.52 98.46 98.81 99.39 99.44
FPR (%) 0.004 0.004 0.017 0.003 0.002 0.004
Training time (s) 349.16 459.91 146.68 77.84 626.24 32.48
Prediction time (s) 0.23 0.20 0.13 1.02 0.55 1.19

717
has very high computational costs, these algorithms could not be used. The subfigures of Figure 2 present (a)
the results of ROC, (b) zoomed-in ROC with scores, and (c) calibration curve.
(a) (b) (c)
Figure 2. Area under curve (AUC) score, ROC, and calibration curves
4.3. Comparison with similar researches
The models implemented in this work were compared with some recent works. The selection of works
is based on the CIC-IDS-2017 dataset and the five algorithms DT, RF, LR, GNB, and AB. Table 5 shows our
results compared to those of other works. The results seem to be in the middle range of previous research. At
this stage, there are some important factors to consider: (1) Some of this research uses feature selection, which
always improves the results; and (2) Another factor is that some of them use the whole dataset, which also
helps to improve the model, especially if it is a binary classification.
Table 5. Comparison of the results obtained with similar research result
Ref. Dataset Algorithm A (%) P (%) R (%) F1 (%) FPR (%) Training (S) Prediction (S)
[27] CIC-IDS-2017
(All)
RF
AB
-
-
98.00
77.00
98.00
84.00
98.00
77.00
-
-
1908.23
1126.24
-
-
[39] CIC-IDS-2017
(Dos / DDos)
DT
RF
LR
GNB
AB
99.91
99.94
84.82
74.42
94.26
-
-
-
-
-
99.91
99.94
84.82
25.57
94.26
99.91
99.94
83.08
35.55
94.02
0.05
0.03
1.66
66.22
2.01
6.46
96.02
51.43
1.01
84.20
0.038
2.40
0.03
0.15
3.15
[40] CIC-IDS-2017
(All)
DT
RF
AB
-
-
-
99.00
99.00
75.00
99.00
98.00
85.00
99.00
98.00
80.00
-
-
-
-
-
-
0.23
1.32
21.26
[41] CIC-IDS-2017
(All)
DT
RF
LR
AB
99.80
99.90
91.50
81.80
99.80
99.90
91.40
76.90
99.80
99.90
91.50
81.80
99.80
99.90
91.00
76.00
-
-
-
-
-
-
-
-
-
-
-
-
[42] CIC-IDS-2017
(Web Attacks)
DT
RF
LR
AB
97.50
97.10
95.50
97.80
97.30
97.80
93.90
96.20
94.60
94.30
91.40
96.50
96.90
97.00
96.30
97.30
-
-
-
-
1.53
1.14
15.80
23.40
-
-
-
-
[56] DDoS DNS DT 99.46 - - - - - -
[62] NSL-KDD LR
RF
83.46
80.50
92.51
92.04
77.20
71.97
84.16
80.78
-
-
-
-
0.17
2.68
[63] CIC-IDS-2018 LR
RF
-
-
91.21
98.79
91.12
99.02
91.14
98.97
-
-
-
-
-
-
Our
work
CIC-IDS-2017
(Web attacks)
DT
RF
LR
GNB
AB
Ensemble
99.53
99.50
98.27
98.30
98.34
99.57
99.56
99.52
99.36
97.97
99.16
99.59
99.57
99.51
98.27
99.66
99.79
99.59
99.57
99.52
98.46
98.81
99.39
99.44
0.004
0.008
0.017
0.003
0.002
0.004
412.06
1516.11
185.82
79.85
637.97
33.60
0.33
2.65
0.08
0.99
0.50
1.18
A: Accuracy; P: Precision; R: Recall; F1: F1-measure; and FPR: False positive rate
4.4. Discussion
The results presented in this paper were obtained without a selection of variables. Thus, it may seem
that our models can provide much better results by selecting the most relevant variables. On the other hand,
we have to mention the imbalance of the CIC-IDS-2017 dataset. This phenomenon sometimes affects the

 ISSN: 2252-8938
718
results of the models in such a way that most of the learning is done on the majority of the dataset, which means
that the detection of minority samples is weak. Some researchers believe that binary classification can partially
solve the imbalance problem. However, in this case, it is no longer possible to know in detail the positive
detection for each attack. Finally, data balancing can solve this problem. There are a number of methods such
as random oversampling, synthetic minority over-sampling technique (SMOTE), SMOTE-EEN, and SMOTE-
Tomek.
5. CONCLUSION
An efficient intrusion detection system must be able to detect any kind of abnormal behaviour with
high accuracy and low false alarm rate. In this work, we have used five ML algorithms and their ensemble
approach to detect web attacks (such as SQL injection, brute force, and XSS) in the CIC-IDS-2017 dataset by
applying k-fold cross validation with K=5. We used GridSearchCV for hyperparameter tuning to achieve better
performance of the models. It provides high accuracy, precision, recall, and F1 score while maintaining low
FPR. According to the results obtained, conventional classifiers can give competitive performance without any
additions or adjustments. Thus, the research questions stated in section 2 can be answered. However, the results
could be even better if the most important variables in the dataset had been selected. In the future, we will focus
on the models that are optimised using feature selection. We will also go through other optimisation methods.
REFERENCES
[1] H. Chourabi et al., “Understanding smart cities: an integrative framework,” in 2012 45th Hawaii International Conference on
System Sciences, Jan. 2012, pp. 2289–2297. doi: 10.1109/HICSS.2012.615.
[2] F. A. Vadhil, M. L. Salihi, and M. F. Nanne, “Toward a secure ELK stack,” International Journal of Computer Science and
Information Security (IJCSIS), vol. 17, no. 7, pp. 139–143, 2019.
[3] A. Singh, J. Amutha, J. Nagar, S. Sharma, and C.-C. Lee, “LT-FS-ID: Log-transformed feature learning and feature-scaling-based
machine learning algorithms to predict the k-barriers for intrusion detection using wireless sensor network,” Sensors, vol. 22, no. 3,
p. 1070, Jan. 2022, doi: 10.3390/s22031070.
[4] K. Albulayhi, Q. Abu Al-Haija, S. A. Alsuhibany, A. A. Jillepalli, M. Ashrafuzzaman, and F. T. Sheldon, “IoT intrusion detection
using machine learning with a novel high performing feature selection method,” Applied Sciences, vol. 12, no. 10, p. 5015, May
2022, doi: 10.3390/app12105015.
[5] A. Singh, J. Amutha, J. Nagar, S. Sharma, and C.-C. Lee, “AutoML-ID: automated machine learning model for intrusion detection
using wireless sensor network,” Scientific Reports, vol. 12, p. 9074, May 2022, doi: 10.1038/s41598-022-13061-z.
[6] Y. Diogenes and E. Ozkaya, “Counter modern threats and employ state-of-the-art tools and techniques to protect your organization
against cybercriminals,” in Cybersecurity – Attack and Defense Strategies, 2nd Editio., Packt Publishing Ltd., 2019.
[7] N. Chaabouni, M. Mosbah, A. Zemmari, C. Sauvignac, and P. Faruki, “Network intrusion detection for IoT security based on
learning techniques,” IEEE Communications Surveys & Tutorials, vol. 21, no. 3, pp. 2671–2701, 2019, doi:
10.1109/COMST.2019.2896380.
[8] T. Hothorn, K. Hornik, and A. Zeileis, “ctree: Conditional inference trees,” pp. 1–34, [Online]. Available: https://cran.r-
project.org/web/packages/partykit/vignettes/ctree.pdf
[9] H.-J. Liao, C.-H. Richard Lin, Y.-C. Lin, and K.-Y. Tung, “Intrusion detection system: A comprehensive review,” Journal of
Network and Computer Applications, vol. 36, no. 1, pp. 16–24, Jan. 2013, doi: 10.1016/j.jnca.2012.09.004.
[10] S. Axelsson, “Intrusion detection systems: a survey and taxonomy,” pp. 1–27, 2000, [Online]. Available:
https://citeseerx.ist.psu.edu/document?repid=rep1&type=pdf&doi=7a15948bdcb530e2c1deedd8d22dd9b54788a634
[11] A. Khraisat, I. Gondal, P. Vamplew, and J. Kamruzzaman, “Survey of intrusion detection systems: techniques, datasets, and
challenges,” Cybersecurity, vol. 2, p. 20, Dec. 2019, doi: 10.1186/s42400-019-0038-7.
[12] F. A. Vadhil, M. F. Nanne, and M. L. Salihi, “Importance of machine learning techniques to improve the open source intrusion
detection systems,” Indonesian Journal of Electrical Engineering and Informatics (IJEEI), vol. 9, no. 3, Sep. 2021, doi:
10.52549/ijeei.v9i3.3219.
[13] J. A. M. Sidey-Gibbons and C. J. Sidey-Gibbons, “Machine learning in medicine: a practical introduction,” BMC Medical Research
Methodology, vol. 19, p. 64, Dec. 2019, doi: 10.1186/s12874-019-0681-4.
[14] C.-J. Wu et al., “Machine learning at Facebook: understanding inference at the edge,” in 2019 IEEE International Symposium on
High Performance Computer Architecture (HPCA), Feb. 2019, pp. 331–344. doi: 10.1109/HPCA.2019.00048.
[15] K. Bresniker, A. Gavrilovska, J. Holt, D. Milojicic, and T. Tran, “Grand challenge: applying artificial intelligence and machine
learning to cybersecurity,” Computer, vol. 52, no. 12, pp. 45–52, Dec. 2019, doi: 10.1109/MC.2019.2942584.
[16] A. Sapegin, “High-speed security log analytics using hybrid outlier detection,” 2019. doi: https://doi.org/10.25932/publishup-42611.
[17] D. S. Kim, H.-N. Nguyen, and J. S. Park, “Genetic algorithm to improve SVM based network intrusion detection system,” in 19th
International Conference on Advanced Information Networking and Applications (AINA’05) Volume 1 (AINA papers), 2005, vol.
2, pp. 155–158. doi: 10.1109/AINA.2005.191.
[18] Y. Guang and N. Min, “Anomaly intrusion detection based on wavelet kernel LS-SVM,” in Proceedings of 2013 3rd International
Conference on Computer Science and Network Technology, Oct. 2013, pp. 434–437. doi: 10.1109/ICCSNT.2013.6967147.
[19] S. Kumar and A. Yadav, “Increasing performance of intrusion detection system using neural network,” in 2014 IEEE International
Conference on Advanced Communications, Control and Computing Technologies, May 2014, pp. 546–550. doi:
10.1109/ICACCCT.2014.7019145.
[20] G. Stein, B. Chen, A. S. Wu, and K. A. Hua, “Decision tree classifier for network intrusion detection with GA-based feature
selection,” in Proceedings of the 43rd annual Southeast regional conference - Volume 2, Mar. 2005, pp. 136–141. doi:
10.1145/1167253.1167288.

719
[21] A. Tesfahun and D. L. Bhaskari, “Intrusion detection using random forests classifier with SMOTE and feature reduction,” in 2013
International Conference on Cloud & Ubiquitous Computing & Emerging Technologies, Nov. 2013, pp. 127–132. doi:
10.1109/CUBE.2013.31.
[22] S. Abdulrezzak and F. Sabir, “An empirical investigation on snort NIDS versus supervised machine learning classifiers,” Journal
of Engineering, vol. 29, no. 2, pp. 164–178, Feb. 2023, doi: 10.31026/j.eng.2023.02.11.
[23] T. Shon and J. Moon, “A hybrid machine learning approach to network anomaly detection,” Information Sciences, vol. 177, no. 18,
pp. 3799–3821, Sep. 2007, doi: 10.1016/j.ins.2007.03.025.
[24] C. Modi, D. Patel, B. Borisaniya, H. Patel, A. Patel, and M. Rajarajan, “A survey of intrusion detection techniques in Cloud,”
Journal of Network and Computer Applications, vol. 36, no. 1, pp. 42–57, Jan. 2013, doi: 10.1016/j.jnca.2012.05.003.
[25] E. E. Abdallah, W. Eleisah, and A. F. Otoom, “Intrusion detection systems using supervised machine learning techniques: a survey,”
Procedia Computer Science, vol. 201, pp. 205–212, 2022, doi: 10.1016/j.procs.2022.03.029.
[26] Y. Hamid, M. Sugumaran, and V. Balasaraswathi, “IDS using machine learning - current state of art and future directions,” British
Journal of Applied Science & Technology, vol. 15, no. 3, pp. 1–22, Jan. 2016, doi: 10.9734/BJAST/2016/23668.
[27] I. Sharafaldin, A. Habibi Lashkari, and A. A. Ghorbani, “Toward generating a new intrusion detection dataset and intrusion traffic
characterization,” in Proceedings of the 4th International Conference on Information Systems Security and Privacy, 2018, pp. 108–
116. doi: 10.5220/0006639801080116.
[28] R. Vijayanand, D. Devaraj, and B. Kannapiran, “Intrusion detection system for wireless mesh network using multiple support vector
machine classifiers with genetic-algorithm-based feature selection,” Computers & Security, vol. 77, pp. 304–314, Aug. 2018, doi:
10.1016/j.cose.2018.04.010.
[29] D. Aksu, S. Üstebay, M. A. Aydin, and T. Atmaca, “Intrusion detection with comparative analysis of supervised learning techniques
and fisher score feature selection algorithm,” in Communications in Computer and Information Science, 2018, pp. 141–149. doi:
10.1007/978-3-030-00840-6_16.
[30] A. Bansal, “DDR scheme and LSTM RNN algorithm for building an efficient IDS,” 2018.
[31] T. Chen and T. He, “xgboost: eXtreme gradient boosting,” 2023. [Online]. Available: https://cran.r-
project.org/web/packages/xgboost/vignettes/xgboost.pdf
[32] A. Boukhamla and J. C. Gaviro, “CICIDS2017 dataset: performance improvements and validation as a robust intrusion detection
system testbed,” International Journal of Information and Computer Security, vol. 16, no. 1/2, pp. 20–32, 2021, doi:
10.1504/IJICS.2021.117392.
[33] S. Ustebay, Z. Turgut, and M. A. Aydin, “Intrusion detection system with recursive feature elimination by using random forest and
deep learning classifier,” in 2018 International Congress on Big Data, Deep Learning and Fighting Cyber Terrorism (IBIGDELFT),
Dec. 2018, pp. 71–76. doi: 10.1109/IBIGDELFT.2018.8625318.
[34] J. Hou, P. Fu, Z. Cao, and A. Xu, “Machine learning based DDos detection through NetFlow analysis,” in MILCOM 2018 - 2018
IEEE Military Communications Conference (MILCOM), Oct. 2018, pp. 1–6. doi: 10.1109/MILCOM.2018.8599738.
[35] A. Bansal and S. Kaur, “Extreme gradient boosting based tuning for classification in intrusion detection systems,” in Advances in
Computing and Data Sciences, 2018, pp. 372–380. doi: 10.1007/978-981-13-1810-8_37.
[36] M. Alrowaily, F. Alenezi, and Z. Lu, “Effectiveness of machine learning based intrusion detection systems,” in Security, Privacy,
and Anonymity in Computation, Communication, and Storage, 2019, pp. 277–288. doi: 10.1007/978-3-030-24907-6_21.
[37] N. Thapa, Z. Liu, D. B. KC, B. Gokaraju, and K. Roy, “Comparison of machine learning and deep learning models for network
intrusion detection systems,” Future Internet, vol. 12, no. 10, p. 167, Sep. 2020, doi: 10.3390/fi12100167.
[38] Z. K. Maseer, R. Yusof, N. Bahaman, S. A. Mostafa, and C. F. M. Foozy, “Benchmarking of machine learning for anomaly based
intrusion detection systems in the CICIDS2017 dataset,” IEEE Access, vol. 9, pp. 22351–22370, 2021, doi:
10.1109/ACCESS.2021.3056614.
[39] N. Meemongkolkiat and V. Suttichaya, “Analysis on network traffic features for designing machine learning based IDS,” Journal
of Physics: Conference Series, vol. 1993, no. 1, p. 012029, Aug. 2021, doi: 10.1088/1742-6596/1993/1/012029.
[40] M. G. da S. Neto and D. G. Gomes, “Network intrusion detection systems design: a machine learning approach,” in Anais do XXXVII
Simpósio Brasileiro de Redes de Computadores e Sistemas Distribuídos (SBRC 2019), May 2019, pp. 932–945. doi:
10.5753/sbrc.2019.7413.
[41] N. Elmrabit, F. Zhou, F. Li, and H. Zhou, “Evaluation of machine learning algorithms for anomaly detection,” in 2020 International
Conference on Cyber Security and Protection of Digital Services (Cyber Security), Jun. 2020, pp. 1–8. doi:
10.1109/CyberSecurity49315.2020.9138871.
[42] M. N. Goryunov, A. G. Matskevich, and D. A. Rybolovlev, “Synthesis of a machine learning model for detecting computer attacks
based on the CICIDS2017 dataset,” Proceedings of the Institute for System Programming of the RAS, vol. 32, no. 5, pp. 81–94,
2020, doi: 10.15514/ISPRAS-2020-32(5)-6.
[43] M. Ring, S. Wunderlich, D. Scheuring, D. Landes, and A. Hotho, “A survey of network-based intrusion detection data sets,”
Computers & Security, vol. 86, pp. 147–167, Sep. 2019, doi: 10.1016/j.cose.2019.06.005.
[44] M. Tavallaee, E. Bagheri, W. Lu, and A. A. Ghorbani, “A detailed analysis of the KDD CUP 99 data set,” in 2009 IEEE Symposium
on Computational Intelligence for Security and Defense Applications, Jul. 2009, pp. 1–6. doi: 10.1109/CISDA.2009.5356528.
[45] A. Gharib, I. Sharafaldin, A. H. Lashkari, and A. A. Ghorbani, “An evaluation framework for intrusion detection dataset,” in 2016
International Conference on Information Science and Security (ICISS), Dec. 2016, pp. 1–6. doi: 10.1109/ICISSEC.2016.7885840.
[46] L. Rokach and O. Maimon, “Top-down induction of decision trees classifiers—a survey,” IEEE Transactions on Systems, Man and
Cybernetics, Part C (Applications and Reviews), vol. 35, no. 4, pp. 476–487, Nov. 2005, doi: 10.1109/TSMCC.2004.843247.
[47] L. Breiman, “Random forests,” Machine Learning, pp. 5–32, 2001, doi: 10.1023/A:1010933404324.
[48] J. S. Cramer, “The origins of logistic regression,” SSRN Electronic Journal, 2003, doi: 10.2139/ssrn.360300.
[49] K. P. Murphy, “Naive bayes classifiers,” 2006. [Online]. Available:
https://www.ic.unicamp.br/~rocha/teaching/2011s1/mc906/aulas/naive-bayes.pdf
[50] Y. Freund and R. E. Schapire, “A decision-theoretic generalization of on-line learning and an application to boosting,” Journal of
Computer and System Sciences, vol. 55, no. 1, pp. 119–139, Aug. 1997, doi: 10.1006/jcss.1997.1504.
[51] G. Hackeling, Mastering machine learning with scikit-learn, Second edi. 2014.
[52] I. Idrissi, M. Azizi, and O. Moussaoui, “An unsupervised generative adversarial network based-host intrusion detection system for
internet of things devices,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 25, no. 2, pp. 1140–1150,
Feb. 2022, doi: 10.11591/ijeecs.v25.i2.pp1140-1150.
[53] T. Ghrib, M. Benmohammed, and P. S. Pandey, “Automated diagnosis of attacks in internet of things using machine learning and
frequency distribution techniques,” Bulletin of Electrical Engineering and Informatics, vol. 10, no. 2, pp. 950–961, Apr. 2021, doi:
10.11591/eei.v10i2.2766.
[54] M. Aldwairi and L. Tawalbeh, “Security techniques for intelligent spam sensing and anomaly detection in online social platforms,”

 ISSN: 2252-8938
720
International Journal of Electrical and Computer Engineering (IJECE), vol. 10, no. 1, pp. 275–287, Feb. 2020, doi:
10.11591/ijece.v10i1.pp275-287.
[55] M. A. Al-Shareeda, S. Manickam, and M. A. Saare, “DDoS attacks detection using machine learning and deep learning techniques:
analysis and comparison,” Bulletin of Electrical Engineering and Informatics, vol. 12, no. 2, pp. 930–939, Apr. 2023, doi:
10.11591/eei.v12i2.4466.
[56] H. Kamel and M. Z. Abdullah, “Distributed denial of service attacks detection for software defined networks based on evolutionary
decision tree model,” Bulletin of Electrical Engineering and Informatics, vol. 11, no. 4, pp. 2322–2330, Aug. 2022, doi:
10.11591/eei.v11i4.3835.
[57] M. I. Kareem and M. N. Jasim, “Fast and accurate classifying model for denial-of-service attacks by using machine learning,”
Bulletin of Electrical Engineering and Informatics, vol. 11, no. 3, pp. 1742–1751, Jun. 2022, doi: 10.11591/eei.v11i3.3688.
[58] A. H. B. Alghuraibawi, R. Abdullah, S. Manickam, and Z. A. A. Alyasseri, “Detection of ICMPv6-based DDoS attacks using
anomaly based intrusion detection system: A comprehensive review,” International Journal of Electrical and Computer
Engineering (IJECE), vol. 11, no. 6, pp. 5216–5228, Dec. 2021, doi: 10.11591/ijece.v11i6.pp5216-5228.
[59] A. A. Ojugo and R. E. Yoro, “Forging a deep learning neural network intrusion detection framework to curb the distributed denial
of service attack,” International Journal of Electrical and Computer Engineering (IJECE), vol. 11, no. 2, pp. 1498–1509, Apr.
2021, doi: 10.11591/ijece.v11i2.pp1498-1509.
[60] N. M. and Y. B. N., “Preemptive modelling towards classifying vulnerability of DDoS attack in SDN environment,” International
Journal of Electrical and Computer Engineering (IJECE), vol. 10, no. 2, pp. 1599–1611, Apr. 2020, doi:
10.11591/ijece.v10i2.pp1599-1611.
[61] R. R. Nuiaa, S. Manickam, A. H. Alsaeedi, and E. S. Alomari, “A new proactive feature selection model based on the enhanced
optimization algorithms to detect DRDoS attacks,” International Journal of Electrical and Computer Engineering (IJECE), vol.
12, no. 2, pp. 1869–1880, Apr. 2022, doi: 10.11591/ijece.v12i2.pp1869-1880.
[62] M. E. Magdy, A. M. Matter, S. Hussin, D. Hassan, and S. A. Elsaid, “Anomaly-based intrusion detection system based on feature
selection and majority voting,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 30, no. 3, pp. 1699–1706,
Jun. 2023, doi: 10.11591/ijeecs.v30.i3.pp1699-1706.
[63] S. Chimphlee and W. Chimphlee, “Machine learning to improve the performance of anomaly-based network intrusion detection in
big data,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 30, no. 2, pp. 1106–1119, May 2023, doi:
10.11591/ijeecs.v30.i2.pp1106-1119.
[64] M. Aljanabi, R. Altaie, S. Talib, A. Hussien Ali, M. A. Mohammed, and T. Sutikno, “Distributed denial of service attack defense
system-based auto machine learning algorithm,” Bulletin of Electrical Engineering and Informatics, vol. 12, no. 1, pp. 544–551,
Feb. 2023, doi: 10.11591/eei.v12i1.4537.
[65] O. Sbai and M. Elboukhari, “Mobile Ad Hoc networks intrusion detection system against packet dropping attacks,” Indonesian Journal
of Electrical Engineering and Computer Science, vol. 26, no. 2, pp. 819–825, May 2022, doi: 10.11591/ijeecs.v26.i2.pp819-825.
[66] T. B. Seong, V. Ponnusamy, N. Z. Jhanjhi, R. Annur, and M. N. Talib, “A comparative analysis on traditional wired datasets and
the need for wireless datasets for IoT wireless intrusion detection,” Indonesian Journal of Electrical Engineering and Computer
Science, vol. 22, no. 2, pp. 1165–1176, May 2021, doi: 10.11591/ijeecs.v22.i2.pp1165-1176.
[67] A. M. Bamhdi, I. Abrar, and F. Masoodi, “An ensemble based approach for effective intrusion detection using majority voting,”
TELKOMNIKA (Telecommunication Computing Electronics and Control), vol. 19, no. 2, p. 664, Apr. 2021, doi:
10.12928/telkomnika.v19i2.18325.
[68] N. S. Zaini et al., “Phishing detection system using nachine learning classifiers,” Indonesian Journal of Electrical Engineering and
Computer Science, vol. 17, no. 3, pp. 1165–1171, Mar. 2020, doi: 10.11591/ijeecs.v17.i3.pp1165-1171.
[69] A. O. Salau, T. A. Assegie, A. T. Akindadelo, and J. N. Eneh, “Evaluation of Bernoulli Naive Bayes model for detection of
distributed denial of service attacks,” Bulletin of Electrical Engineering and Informatics, vol. 12, no. 2, pp. 1203–1208, Apr. 2023,
doi: 10.11591/eei.v12i2.4020.
[70] I. Laassar and M. Y. Hadi, “Intrusion detection systems for internet of thing based big data: a review,” International Journal of
Reconfigurable and Embedded Systems (IJRES), vol. 12, no. 1, pp. 87–96, Mar. 2023, doi: 10.11591/ijres.v12.i1.pp87-96.
[71] N. P. Shetty, J. Shetty, R. Narula, and K. Tandona, “Comparison study of machine learning classifiers to detect anomalies,”
International Journal of Electrical and Computer Engineering (IJECE), vol. 10, no. 5, pp. 5445–5452, Oct. 2020, doi:
10.11591/ijece.v10i5.pp5445-5452.
[72] S. Rajagopal, P. P. Kundapur, and H. K. Siddaramappa, “A predictive model for network intrusion detection using stacking
approach,” International Journal of Electrical and Computer Engineering (IJECE), vol. 10, no. 3, pp. 2734–2741, Jun. 2020, doi:
10.11591/ijece.v10i3.pp2734-2741.
[73] S. Rajagopal, K. Siddaramappa Hareesha, and P. Panduranga Kundapur, “Performance analysis of binary and multiclass models
using azure machine learning,” International Journal of Electrical and Computer Engineering (IJECE), vol. 10, no. 1, pp. 978–
986, Feb. 2020, doi: 10.11591/ijece.v10i1.pp978-986.
[74] M. C. Belavagi and B. Muniyal, “Multiple intrusion detection in RPL based networks,” International Journal of Electrical and
Computer Engineering (IJECE), vol. 10, no. 1, pp. 467–476, Feb. 2020, doi: 10.11591/ijece.v10i1.pp467-476.
[75] T. A. J. Ali and M. M. T. Jawhar, “Detecting network attacks model based on a convolutional neural network,” International Journal
of Electrical and Computer Engineering (IJECE), vol. 13, no. 3, pp. 3072–3078, Jun. 2023, doi: 10.11591/ijece.v13i3.pp3072-3078.
[76] B. I. Farhan and A. D. Jasim, “Performance analysis of intrusion detection for deep learning model based on CSE‑CIC‑IDS2018
dataset,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 26, no. 2, pp. 1165–1172, May 2022, doi:
10.11591/ijeecs.v26.i2.pp1165-1172.
[77] R. I. Farhan, A. T. Maolood, and N. F. Hassan, “Performance analysis of flow-based attacks detection on CSE-CIC-IDS2018 dataset
using deep learning,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 20, no. 3, pp. 1413–1418, Dec.
2020, doi: 10.11591/ijeecs.v20.i3.pp1413-1418.
[78] S. Laqtib, K. El Yassini, and M. L. Hasnaoui, “A technical review and comparative analysis of machine learning techniques for
intrusion detection systems in MANET,” International Journal of Electrical and Computer Engineering (IJECE), vol. 10, no. 3,
pp. 2701–2709, Jun. 2020, doi: 10.11591/ijece.v10i3.pp2701-2709.
[79] J. Majidpour and H. Hasanzadeh, “Application of deep learning to enhance the accuracy of intrusion detection in modern computer
networks,” Bulletin of Electrical Engineering and Informatics, vol. 9, no. 3, pp. 1137–1148, Jun. 2020, doi: 10.11591/eei.v9i3.1724.
[80] A. Boukhalfa, A. Abdellaoui, N. Hmina, and H. Chaoui, “LSTM deep learning method for network intrusion detection system,”
International Journal of Electrical and Computer Engineering (IJECE), vol. 10, no. 3, pp. 3315–3322, Jun. 2020, doi:
10.11591/ijece.v10i3.pp3315-3322.

721
[81] M. Ramasamy and P. V. Eric, “A tree growth based forward feature selection algorithm for intrusion detection system on
convolutional neural network,” Bulletin of Electrical Engineering and Informatics, vol. 12, no. 1, pp. 472–482, Feb. 2023, doi:
10.11591/eei.v12i1.4015.
BIOGRAPHIES OF AUTHORS
Fatimetou Abdou Vadhil received her Ph.D. degree in computer science and
information technology from the Faculty of Sciences and Techniques, University of
Nouakchott, Nouakchott, Mauritania in 2021. She is currently a researcher at the research
unit: scientific computing, computer science and data science. Her research area of interest
includes the use of artificial intelligence for the improvement of security systems. She can be
contacted at email: fatiab38@gmail.com.
Mohamed Lemine Salihi is a teacher researcher in the Mathematics and
Computer Science department at the Faculty of Sciences and Techniques, University of
Nouakchott, Nouakchott, Mauritania. His area of research of interest includes scientific
computing, artificial intelligence, network security, and data science. He can be contacted at
email: mlsalihi@gmail.com.
Mohamedade Farouk Nanne is a teacher researcher in the Mathematics and
Computer Science department at the Faculty of Sciences and Techniques, University of
Nouakchott, Nouakchott, Mauritania. His area of research of interest includes artificial
intelligence, conversational agents, network security, bioinformatics, and internet of things.
He can be contacted at email: mohamedade@gmail.com.

Machine learning-based intrusion detection system for detecting web attacks

Recommended

More Related Content

Similar to Machine learning-based intrusion detection system for detecting web attacks (20)

More from IAESIJAI (20)

Recently uploaded (20)

Machine learning-based intrusion detection system for detecting web attacks