Mikrotik pcq
Download as DOCX, PDF0 likes742 views
This document provides instructions for configuring a MikroTik router to share a single internet connection among multiple local computers using network address translation (NAT). It describes how to configure the WAN and LAN interfaces, set up DHCP and DNS servers, enable NAT and firewall rules to masquerade the LAN IP addresses, and limit bandwidth to 10kbps per device on the LAN. The configuration shares an internet connection from a WAN IP to a LAN with IP range 192.168.0.0/24 while restricting bandwidth using queue types and simple queues.
Ad
More Related Content
What's hot (20)
Similar to Mikrotik pcq (20)
Ad
Recently uploaded (20)
Ad
Mikrotik pcq
- 1. Cable setup basic configuration mikrotik first of all setup all the ports case of dynamic ip (emulation router linksys generic) ip-- dhcp client add eth3 (write port ip address you wish) go to bridge tag bridge add one bridge --- ports add eth1 add eth2 add wlan ip--- dns add one write ip of dhcp then go to setting write dns1 200.42.0.111 ip --- address add 192.168.1.1/24 IMPORTANTE /24 select bridge at interface ip dhcp server click on dhcp setup dhcp server interface BRIDGE dhcp address space 192.168.1.0/24 gateways for dhcp network 192.168.1.1 address to give out 192.168.1.2- 192.168.1.254 dns 1 200.42.0.111 dns 2 200.42.0.109 ip ---- firewall add one rule chain SRCNAT out interface ETH3 ACTION masquerade Basic Internet Sharing with Bandwidth Limiting This tutorial explains how to configure a router to share a single Internet connection (WAN) among multiple local computers (LAN) using NAT. First we will configure interface that is connected to WAN. / ip address add address=192.168.1.20/24 network=192.168.1.0 broadcast=192.168.1.255 interface=ether2 Now one interface is configured and connected to WAN (with ip 192.168.1.20/24). Now we will configure second interface for our Local Network. / ip address add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=ether1 Now we will configure DHCP using WinBOX, download Winbox from http://www.mikrotik.com and login to you MT Router. Then goto IP > DHCP-Server, now press Setup Button, then you will see a similar window as shown below. Just select the interface that you have configured for your Local Network (as in our example it is ether1), now just press Next till the end of setup.
- 2. Now we will configure DNS for our local network. Goto IP > DNS, press Settings button then add you Primary and Secondary DNS Server IP as provided by your Internet Service Provider. Also make sure that you select "Allow Remote Requests", so that you can give your MT Router's IP as a DNS Server to your Clients. Then Apply and OK.
- 3. Now we will configure NATing for our Local Network. Goto IP > Firewall, goto NAT table press the plus sign which will allow you to add new firewall rules. Select chain=srcnat, then set Src. Address=192.168.0.0/24 (ip range of your local network), then select Out.Interface=ether2 (interface connected WAN), as shown below.
- 4. Now goto Action Tab in the same window, then select Action=Masquerade, then Apply and OK.
- 5. Now we will setup Bandwidth restriction (10kbps per IP in 192.168.0.0/24 range). Goto Queues, then goto Queue Types, then press the plus sign to add a custom Queue Type. In the name field enter your desired name, select kind=pcq. As shown below.
- 6. Now goto Settings Tab in the same window, and enter the Rate to 10000 (i.e equal to 10kbps), also select Dst. Address, as shown below.
- 7. Now for Upload limit repeat the same procedure to create another Queue Type name it something different and in the Settings Tab instead of selecting Dst. Address this time select Src. Address. Apply and OK Now in the Queues window goto Simple Queues Tab, and add a new simple queue by pressing plus sign. Enter your desired name, then add a Target Address=192.168.0.0/24 the IP Range of your local network.
- 8. Now goto Advanced Tab in the same window and in Queue Type in the Target Upload select the Queue Type that we created before for upload restriction purpose, do the same for Target Download. As shown below. Press Apply and OK.
- 9. As per the steps shown and performed, you should now have an up and running MT Router, that will serve Internet Service to local network with IP Range 192.168.0.0/24 that will be given by the DHCP Server. Hope this will help out many people. Created by Mudasir Mirza Navigation menu Log in Page Discussion
- 10. Read View source View history Go Main Page Recent changes Print/export Create a book Download as PDF Printable version Tools What links here Related changes Special pages Permanent link Page information This page was last modified on 29 May 2011, at 18:59. This page has been accessed 117,756 times. Privacy policy About MikroTik Wiki Disclaimers