New Holland 9030L Grape Harvester Service Repair Manual.pdf

Part number 90323626
English
November 2019
SERVICE MANUAL
9030L
Grape Harvester
Printed in U.S.A.
© 2017 CNH Industrial Italia S.p.A. All Rights Reserved.
New Holland is a trademark registered in the United States and many other countries,
owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates.

Link Product / Engine
Product Market Product Engine
9030L Grape harvester for large
vineyard - High capacity range with
essential devices
North America F4HFE413X*B001
90323626 01/11/2019

Contents
INTRODUCTION
Engine....................................................................................... 10
[10.001] Engine and crankcase ............................................................. 10.1
[10.216] Fuel tanks .......................................................................... 10.2
[10.206] Fuel filters .......................................................................... 10.3
[10.202] Air cleaners and lines .............................................................. 10.4
[10.254] Intake and exhaust manifolds and muffler ......................................... 10.5
[10.500] Selective Catalytic Reduction (SCR) exhaust treatment ........................... 10.6
[10.400] Engine cooling system ............................................................. 10.7
[10.414] Fan and drive ...................................................................... 10.8
[10.310] Aftercooler.......................................................................... 10.9
[10.304] Engine lubrication system........................................................ 10.10
Hydrostatic drive......................................................................... 29
[29.204] Reservoir, cooler, and lines ........................................................ 29.1
[29.218] Pump and motor components...................................................... 29.2
[29.202] Hydrostatic transmission ........................................................... 29.3
Brakes and controls .................................................................... 33
[33.202] Hydraulic service brakes ........................................................... 33.1
Hydraulic systems....................................................................... 35
[35.000] Hydraulic systems.................................................................. 35.1
[35.300] Reservoir, cooler, and filters........................................................ 35.2
[35.104] Fixed displacement pump.......................................................... 35.3
[35.106] Variable displacement pump ....................................................... 35.4
[35.204] Remote control valves ............................................................. 35.5
[35.610] Machine leveling control system ................................................... 35.6
[35.946] Frame positioning lifting............................................................ 35.7
90323626 01/11/2019

[35.903] Shaking hydraulic system .......................................................... 35.8
[35.930] Conveyor receiver system ......................................................... 35.9
[35.952] Destemmer system .............................................................. 35.10
[35.904] Cleaning hydraulic system ....................................................... 35.11
[35.902] Harvesting hopper hydraulic system ............................................. 35.12
[35.706] Fruit repartition system........................................................... 35.13
[35.310] Distributor and lines .............................................................. 35.14
[35.707] Sorting table system ............................................................. 35.15
Frames and ballasting ................................................................. 39
[39.100] Frame .............................................................................. 39.1
Steering..................................................................................... 41
[41.101] Steering control .................................................................... 41.1
Wheels...................................................................................... 44
[44.000] Wheels ............................................................................. 44.1
Cab climate control ..................................................................... 50
[50.100] Heating ............................................................................. 50.1
[50.200] Air conditioning..................................................................... 50.2
[50.300] Cab pressurizing system ........................................................... 50.3
Electrical systems....................................................................... 55
[55.000] Electrical system ................................................................... 55.1
[55.101] Chassis harness ................................................................... 55.2
[55.201] Engine starting system ............................................................. 55.3
[55.302] Battery.............................................................................. 55.4
[55.988] Selective Catalytic Reduction (SCR) electrical system ............................ 55.5
[55.640] Electronic modules ................................................................. 55.6
[55.019] Hydrostatic drive control system ................................................... 55.7
[55.512] Cab controls........................................................................ 55.8
[55.050] Heating, Ventilation, and Air-Conditioning (HVAC) control system................. 55.9
90323626 01/11/2019

[55.924] Cab fruit harvesting controls ..................................................... 55.10
[55.927] Shaking control system .......................................................... 55.11
[55.404] External lighting .................................................................. 55.12
[55.408] Warning indicators, alarms, and instruments .................................... 55.13
[55.DTC] FAULT CODES.................................................................. 55.14
Fruit harvester shaking................................................................ 56
[56.300] Shaking frame...................................................................... 56.1
[56.301] Shaking control..................................................................... 56.2
[56.304] Connecting rods, front plates, and shakers ........................................ 56.3
[56.305] Adjustable width system ........................................................... 56.4
Product feeding .......................................................................... 60
[60.304] Noria ............................................................................... 60.1
[60.308] Noria frame and guides ............................................................ 60.2
[60.320] Fruit harvester conveyor belts...................................................... 60.3
[60.324] Fruit harvester conveyor frame .................................................... 60.4
Residue handling........................................................................ 73
[73.500] Stalk chopper ...................................................................... 73.1
Cleaning.................................................................................... 74
[74.200] Upper extractors ................................................................... 74.1
[74.204] Lower extractors ................................................................... 74.2
Secondary cleaning/Destemmer................................................... 76
[76.660] Destemmer......................................................................... 76.1
[76.200] Sorting table (Opti-grape™)........................................................ 76.2
Crop storage / Unloading............................................................. 80
[80.300] Fruit conveying system............................................................. 80.1
Accessories ............................................................................... 88
[88.100] Accessories ........................................................................ 88.1
[88.740] Fruit harvester telescopic arm...................................................... 88.2
90323626 01/11/2019

Tools ......................................................................................... 89
[89.165] Water kit............................................................................ 89.1
Platform, cab, bodywork, and decals............................................. 90
[90.105] Machine shields and guards ....................................................... 90.1
90323626 01/11/2019

INTRODUCTION
90323626 01/11/2019
1

INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your NEW HOLLAND Sales and Service Networks.
90323626 01/11/2019
4

INTRODUCTION
Safety rules
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
90323626 01/11/2019
9

INTRODUCTION
Safety rules - Ecology and the environment
Soil, air, and water quality is important for all industries and life in general. When legislation does not yet rule the
treatment of some of the substances that advanced technology requires, sound judgment should govern the use and
disposal of products of a chemical and petrochemical nature.
Familiarize yourself with the relative legislation applicable to your country, and make sure that you understand this
legislation. Where no legislation exists, obtain information from suppliers of oils, filters, batteries, fuels, anti-freeze,
cleaning agents, etc., with regard to the effect of these substances on man and nature and how to safely store, use,
and dispose of these substances.
Helpful hints
• Avoid the use of cans or other inappropriate pressurized fuel delivery systems to fill tanks. Such delivery systems
may cause considerable spillage.
• In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of these products contain substances
that may be harmful to your health.
• Modern oils contain additives. Do not burn contaminated fuels and or waste oils in ordinary heating systems.
• Avoid spillage when you drain fluids such as used engine coolant mixtures, engine oil, hydraulic fluid, brake fluid,
etc. Do not mix drained brake fluids or fuels with lubricants. Store all drained fluids safely until you can dispose of
the fluids in a proper way that complies with all local legislation and available resources.
• Do not allow coolant mixtures to get into the soil. Collect and dispose of coolant mixtures properly.
• The air-conditioning system contains gases that should not be released into the atmosphere. Consult an air-condi-
tioning specialist or use a special extractor to recharge the system properly.
• Repair any leaks or defects in the engine cooling system or hydraulic system immediately.
• Do not increase the pressure in a pressurized circuit as this may lead to a component failure.
• Protect hoses during welding. Penetrating weld splatter may burn a hole or weaken hoses, allowing the loss of oils,
coolant, etc.
Battery recycling
Batteries and electric accumulators contain several substances that can have a harmful
effect on the environment if the batteries are not properly recycled after use. Improper
disposal of batteries can contaminate the soil, groundwater, and waterways. NEW
HOLLAND strongly recommends that you return all used batteries to a NEW HOLLAND
dealer, who will dispose of the used batteries or recycle the used batteries properly. In
some countries, this is a legal requirement.
Mandatory battery recycling
NOTE: The following requirements are mandatory in Brazil.
Batteries are made of lead plates and a sulfuric acid solution. Because batteries contain heavy metals such as lead,
CONAMA Resolution 401/2008 requires you to return all used batteries to the battery dealer when you replace any
batteries. Do not dispose of batteries in your household garbage.
Points of sale are obliged to:
• Accept the return of your used batteries
• Store the returned batteries in a suitable location
• Send the returned batteries to the battery manufacturer for recycling
90323626 01/11/2019
10

SERVICE MANUAL
Engine
9030L
90323626 01/11/2019
10

Engine - Engine and crankcase
Engine and crankcase - Overview - GENERAL COMBUSTION
ENGINE
COIL17GR00851UA 1
1 Cooling system Radiator - Detailed view - Engine cooling (10.400)
2 Exhaust gas after treatment - SCR Selective Catalytic Reduction (SCR) exhaust treatment -
Detailed view (10.500)
3 Engine – General specifications Engine and crankcase - Detailed view - Engine general
information (10.001)
4 Air cleaner Engine and crankcase - Detailed view - Air filter (10.001)
5 Servo belt Engine and crankcase - Detailed view - Servo belt (10.001)
6 Engine mount Engine and crankcase - Detailed view of the engine frame -
9000 M & L (10.001)
7 Pumps Engine and crankcase - Detailed view - Pumps (10.001)
8 Fuel system Fuel tanks - Detailed view - Fuel System (10.216)
9 Flector Engine and crankcase - Detailed view - The flex disc (10.001)
90323626 01/11/2019
10.1 [10.001] / 4

Engine and crankcase - Overview - GENERAL COMBUSTION
ENGINE
COIL17GR00851UA 1
1 Cooling system Radiator - Detailed view - Engine cooling (10.400)
2 Exhaust gas after treatment - SCR Selective Catalytic Reduction (SCR) exhaust treatment -
Detailed view (10.500)
3 Engine – General specifications Engine and crankcase - Detailed view - Engine general
information (10.001)
4 Air cleaner Engine and crankcase - Detailed view - Air filter (10.001)
5 Servo belt Engine and crankcase - Detailed view - Servo belt (10.001)
6 Engine mount Engine and crankcase - Detailed view of the engine frame -
9000 M & L (10.001)
7 Pumps Engine and crankcase - Detailed view - Pumps (10.001)
8 Fuel system Fuel tanks - Detailed view - Fuel System (10.216)
9 Flector Engine and crankcase - Detailed view - The flex disc (10.001)
90323626 01/11/2019
10.1 [10.001] / 5

Engine - Check
The valve-to-tappet clearances are located inside the
valve rocker cover.
The valve-to-tappet clearances should be checked and
adjusted by your authorized dealer.
COIL15GR00344AA 1
90323626 01/11/2019
10.1 [10.001] / 6

Engine - Replace
The breather filter and pressure regulator are located
inside the valve rocker cover.
The filter and pressure regulator should be cleaned or
replaced by your authorized NEW HOLLAND dealer.
COIL15GR00344AA 1
90323626 01/11/2019
10.1 [10.001] / 7

Engine - Remove
WARNING
Hot surface possible!
Wait for all components to cool before performing any operation.
Failure to comply could result in death or serious injury.
W0251A
Prior operation:
Recover the air conditioning system, see Air conditioning - Recover (50.200).
Prior operation:
Remove the cooling pack assembly, see Engine cooling system - Remove (10.400).
NOTICE: Emissions sensors mounted in the exhaust stream are sensitive to extreme vibrations. Use of tools that
generate extreme vibrations, such as impact wrenches and hammers, will result in damage to emission sensors.
Avoid using these tools during any service procedure in close proximity of emission sensors. If the use of these tools
cannot be avoided, remove the sensors using extreme caution prior to performing any service procedure.
7030M and 8030L models
1. Disconnect the negative (–) terminal from machine’s
battery.
COIL15GR00843AA 1
9070L model
2. Disconnect the negative (–) terminal from machine’s
battery.
COIL16GR01309AA 2
90323626 01/11/2019
10.1 [10.001] / 8

All models
3. 1. Detach the clamp (2).
2. Remove the cooling pipe (1).
COIL14GR00223AC 3
4. 1. Disconnect the starter motor electrical connectors
(1).
2. Detach the relay bracket (2).
3. Disconnect the earth strap (3).
COIL14GR00224AC 4
5. 1. Disconnect the alternator electrical connectors (2).
2. Reposition the wiring harness to one side.
3. Disconnect the coolant hose (1).
COIL14GR00225AC 5
6. Remove the engine side panel retaining bracket.
COIL14GR00226AB 6
90323626 01/11/2019
10.1 [10.001] / 9

7. 1. Detach the wiring harness (1).
2. Disconnect the electrical connector (2).
COIL16GR01455AA 7
8. 1. Disconnect the electrical connector (1).
2. Detach the wiring harness (2).
COIL16GR01456AA 8
9. 1. Disconnect the engine breather hose (1).
2. Disconnect the turbo supply hose (2).
COIL14GR00227AC 9
10. Remove the drive belt guard.
COIL15GR00427AA 10
90323626 01/11/2019
10.1 [10.001] / 10

11. 1. With the aid of another person, support the air
filter and frame assembly.
2. Remove the air filter and frame assembly.
COIL14GR00230AB 11
12. Disconnect the air conditioning compressor pipes.
NOTICE: Seal all open air conditioning connections with
clean blanking caps.
COIL14GR00231AB 12
13. 1. Disconnect the Engine Control Unit (ECU) fuel/
cooling pipe (1).
2. Disconnect the electrical connector (2).
3. Disconnect the fuel filter housing fuel hose (3).
COIL14GR00232AC 13
14. 1. Cut the cable ties (1).
2. Disconnect the ECU lower connector (2).
3. Disconnect the electrical connectors (3).
4. Position the wiring harness to one side.
COIL14GR00233AC 14
90323626 01/11/2019
10.1 [10.001] / 11

15. 1. Cut the cable tie (1).
2. Re-position the wiring harness (2).
COIL14GR00234AC 15
16. Disconnect the tandem pump hydraulic hoses.
COIL14GR00235AC 16
17. Remove the fuel pipe.
COIL14GR00236AB 17
18. Using suitable lifting equipment, support the engine.
NOTE: Only lift the engine using the lifting brackets
mounted on the engine.
COIL14GR00237AC 18
90323626 01/11/2019
10.1 [10.001] / 12

19. Remove the engine front retaining bolts.
COIL14GR00238AB 19
20. Remove the engine right-hand rear bracket retaining
bolt.
COIL14GR00239AB 20
21. Remove the engine left-hand rear bracket retaining
bolt.
COIL14GR00240AB 21
22. Using a suitable piece of wood, support the rear of the
forward control pump.
COIL14GR00241AB 22
90323626 01/11/2019
10.1 [10.001] / 13

23. Remove the engine right-hand rear bracket.
COIL14GR00242AB 23
24. Remove the engine left-hand rear bracket.
COIL14GR00243AB 24
25. With the aid of another person, remove the engine
rear upper frame left-hand bracket.
COIL14GR00436AB 25
26. Disconnect the hydraulic oil hoses.
COIL14GR00244AD 26
90323626 01/11/2019
10.1 [10.001] / 14

27. Remove the pump mounting plate lower left-hand re-
taining bolts.
COIL14GR00249AB 27
28. Remove the pump mounting plate lower right-hand
retaining bolts.
COIL14GR00245AB 28
29. Using a suitable piece of wood, support the pump
mounting plate.
COIL14GR00246AB 29
30. Remove the pump mounting plate upper retaining
bolts.
COIL14GR00247AB 30
90323626 01/11/2019
10.1 [10.001] / 15

Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.

31. Remove the engine.
NOTE: When removing the engine make sure that all wiring
harnesses, pipes and hoses are free from obstruction.
COIL14GR00248AB 31
32. Secure the engine on a suitable stand, see Special
tools () .
90323626 01/11/2019
10.1 [10.001] / 16

Engine - Install
NOTICE: Emissions sensors mounted in the exhaust stream are sensitive to extreme vibrations. Use of tools that
generate extreme vibrations, such as impact wrenches and hammers, will result in damage to emission sensors.
Avoid using these tools during any service procedure in close proximity of emission sensors. If the use of these tools
cannot be avoided, remove the sensors using extreme caution prior to performing any service procedure.
1. Install the engine.
NOTE: When installing the engine make sure that all wiring
harnesses, pipes and hoses are routed correctly.
COIL14GR00248AB 1
2. Install the pump mounting plate upper retaining bolts,
tighten to 50 N·m.
NOTE: Apply a thin coat of LOCTITE® 221 to the threads.
COIL14GR00247AB 2
3. Install the pump mounting plate lower right-hand retain-
ing bolts, tighten to 50 N·m.
COIL14GR00245AB 3
90323626 01/11/2019
10.1 [10.001] / 17

4. Install the pump mounting plate lower left-hand retain-
ing bolts, tighten to 50 N·m.
COIL14GR00249AB 4
5. Remove the piece of wood supporting the pump mount-
ing plate.
COIL14GR00246AB 5
6. Connect the hydraulic oil hoses.
COIL14GR00244AD 6
7. With the aid of another person, install the engine rear
upper frame left-hand bracket.
COIL14GR00436AB 7
90323626 01/11/2019
10.1 [10.001] / 18

New Holland 9030L Grape Harvester Service Repair Manual.pdf

More Related Content

Similar to New Holland 9030L Grape Harvester Service Repair Manual.pdf (20)

More from 8sjkdkdmdmdm (20)

Recently uploaded (20)

New Holland 9030L Grape Harvester Service Repair Manual.pdf