Olio Idraulico - Texaco Hydraulic Oil AW - Fornid
0 likes583 views
Texaco Hydraulic Oil AW is a universal, multi-purpose hydraulic fluid suitable for light to medium duty applications. It is formulated with solvent refined base fluids and additives that provide oxidation resistance, detergency, dispersancy, wear resistance, corrosion protection, foam suppression, and good system cleanliness and protection. Texaco Hydraulic Oil AW meets the DIN 51524 Part 2 (HLP) and ISO 6743 Part 4 (LHM) approvals and is recommended for many hydraulic applications.
Olio Idraulico - Texaco Hydraulic Oil AW - Fornid
- 1. Always confirm that the product selected is consistent with the original equipment manufacturer’s recommendation for the equipment operating conditions and customer’s maintenance practices. Product description Texaco Hydraulic Oil AW is a universal, multi-purpose hydraulic fluid suitable for a wide range of light to medium duty applications. Texaco Hydraulic Oil AW in formulated with solvent refined base fluids and anti-wear, anti-corrosion and anti-oxidation additives plus DIN 51542-2 HLP detergent and dispersant agents for good all-round system reliability. Customer benefits • Oxidation resistance increases filter and oil life, saving time and money • Detergent and dispersant additives keep the system clean, increasing uptime • Wear resistance increases equipment service life • Corrosion protection improves component reliability, reducing maintenance and costs • Foam suppression ensures good lubrication performance and system protection • Meets DIN 51524 Part 2 (HLP) and ISO 6743 Part 4 (LHM) approvals and recommended for many more • Offers good system cleanliness • Protects against corrosion and wear • Wide range of applications Texaco Hydraulic Oil AW Proven performance universal hydraulic fluid Product highlights
- 2. Texaco Hydraulic Oil AW ─ Continued Disclaimer Chevron accepts no liability for any loss or damage suffered as a result of using this product for any application other than applications specifically stated in any Product Data Sheets. Health, safety, storage and environmental Based on current available information, this product is not expected to produce adverse effects on health when used for the intended application and in accordance with the recommendations provided in the Material Safety Data Sheet (MSDS). MSDSs are available upon request through your local sales office, or via the Internet. This product should not be used for purposes other than its intended use. When disposing of used product, take care to protect the environment and follow local legislation. © 2011 Chevron Products UK Limited. All rights reserved. All trademarks are property owned by Chevron Intellectual Property LLC. EU v1 19 July 2007 Texaco Hydraulic Oil AW Applications • Recommended for use as a multi-service light to medium duty hydraulic fluid where not more than DIN 51524 – 2 (HLP) is required Approvals, performance and recommendations Performance • DIN 51524 Part 2 (HLP) • ISO 6743 Part 4 (LHM) Typical test data Test Test methods Results Viscosity Grade 32 46 68 Visc. Kinematic at 40°C ISO 3104 32 46 68 Visc. Kinematic at 100°C ISO 3104 5.49 6.73 8.6 Viscosity Index ISO 2909 104 101 95 Flash Point, °C ISO 2592 214 222 234 Pour point, °C ISO 3016 -30 -25 -25 TAN, mg KOH/g ASTM D664 0.40 0.40 0.40 Density, 15°C, kg/l ASTM D1298 0.876 0.882 0.887 Cu Corrosion, 3h, 100°C ASTM D1401 1a 1a 1a The information given in the typical data does not constitute a specification but is an indication based on current production and can be affected by allowable production tolerances. The right to make modifications is reserved. This supersedes all previous editions and information contained in them.